tHAnK YoU
Thank you for purchasing the Jabra CrUISEr2 bluetooth®
speakerphone. We hope you enjoy it! This instruction manual
will get you started and ready to make the most of your
speakerphone.
ABoUt YoUR JABRA CRUIseR2
A
B
C
D
E
F
G
H
I
Answer/end button
Volume up
Volume down
Mute button
FM Button
On/off switch
Charging port
FM status icon
Connection status icon
Call status icon
Battery status icon
Visor clip
J
K
L
A
B
C
L
H
I
J
K
E
F
G
D
Jabra CrUISEr2
2
WHAt YoUR sPeAKeRPHone CAn Do
Your Jabra CRUISER2 lets you do all this:
-
-
-
-
-
-
-
-
-
-
-
-
answer calls
anounce the name of the caller
End calls
reject calls*
Voice dialing*
Last number redial*
Mute
Third party calling*
Transfer calls
Night Driving Mode
adjust volume
Download your speakerphone so the name of the caller will be
announced
-
-
-
Transmit mobile music
Transmit calls or music to your car stereo via the FM transmitter
advanced MultiUse™ – Stay connected to two active bluetooth
devices at the same time
Specifications
-
-
-
-
-
-
-
Talk time up to 14 hours/Standby time up to 300 hours
Dual Microphone technology
Digital sound enhancement via DSP technology
Voice announcementsTM
a2DP (advanced audio Distribution Profile) for streaming music
FM transmitter
Jabra Status display – battery status, call status, connection
status, FM status
-
-
-
-
-
-
-
Size: L 65 mm x W 130 mm x H 19 mm
Weight 85 grams
Operating range up to 10 meters (approximately 33 feet)
Supported bluetooth profiles: HFP, HSP, a2DP, aVrCP, PbaP
bluetooth specification (see glossary) version 2.1 + EDr
e-SCO for enhanced audio quality
rechargeable battery with charging option from car charger or
via USb cable
Jabra CrUISEr2
3
* Phone dependent
GettInG stARteD
You should follow three steps before using your speakerphone:
1
2
Charge your speakerphone
Activate Bluetooth on your mobile phone (refer to the
manual for your Mobile phone)
3
Pair your speakerphone to your mobile phone
The Jabra CrUISEr2 is easy to operate. The answer/end button
on the speakerphone performs different functions depending on
how long you press it.
Instruction
Tap
Duration of press
Press briefly
Double tap
Press
2 quickly repeated taps
approx. 1 second
approx. 5 seconds
Press and hold
CHARGe YoUR sPeAKeRPHone
Make sure that your speakerphone is fully charged for two hours
before you start using it. Use the USb cable to connect Jabra
CrUISEr2 to the car charger. Plug the car charger into your car’s
power outlet. The battery Status Icon will light up red while
charging. When fully charged the battery Status Icon will turn
green. Jabra CrUISEr2 can be charged outside your car by only
using the USb cable.
VOL
+
VOL
-
MUTE
jabra
Jabra CrUISEr2
4
Use only the charger provided in the box – do not use chargers
from any other devices as this may damage your speakerphone.
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
tURnInG YoUR sPeAKeRPHone on AnD oFF
- Slide the on/off button to turn the speakerphone on or off
SLEEP MODE
When disconnected from the phone, the speakerphone turns off
automatically after 10 minutes. Tap answer/end button to turn
the speakerphone on again.
PAIRInG It WItH YoUR PHone
Speakerphones are connected to mobile phones using a procedure
called ‘pairing’. by following a few simple steps, a phone can be
paired with a speakerphone in a matter of minutes.
1
Put the speakerphone in pairing mode
-
When you turn on your Jabra CrUISEr2 for the first time, the
speakerphone will automatically start up in pairing mode – i.e.
it is discoverable for your phone. When the speakerphone is in
pairing mode you will hear the voice announcement “pairing
mode” and the Connection status icon will flash rapidly.
Jabra CrUISEr2
5
2
Set your Bluetooth phone to ‘discover’ the Jabra CRUISER2
-
Follow your phone’s instruction guide. First make sure that
bluetooth is activated on your mobile phone. Then set your
phone to discover the speakerphone. This usually involves
going to a ‘setup,’ ‘connect’ or ‘bluetooth’ menu on your phone
and selecting the option to ‘discover’ or ‘add’ a bluetooth device.*
3
Your phone will find the Jabra CRUISER2
-
Your phone will find the speakerphone under the name
“Jabra CrUISEr2”.
-
Your phone then asks if you want to pair with the speakerphone.
accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with
the passkey or PIN = 0000 (4 zeros). Your phone will confirm
when pairing is complete.
CONNECTIVITY
DEVICES FOUND
Jabra CRUISER2
Jabra CRUISER2
HANDSFREE
MobilSurf
Jabra CRUISER2
added.
The handsfree is
now ready for use
BLUETO OTH
Infrared port
Wap options
Synchronization
Networks
Passkey:
****
SELECT
SELECT
OK
SELECT
Manual pairing mode
If you wish to use the speakerphone with a different phone, or
if the pairing process was interrupted, you can manually set the
speakerphone to pairing mode.
Turn the speakerphone on. Press and hold the answer/end button
for approximately 5 seconds until “pairing mode” is announced.
Then repeat steps 2. and 3. in the above pairing guide.
ConneCtInG WItH YoUR PHone
Pairing is only needed the first time a speakerphone and a phone
are used together. When the speakerphone and phone have
been paired once, they will automatically connect when the
speakerphone is on and bluetooth is activated on the phone. The
speakerphone can be used when it is “connected” to the phone.
If the devices are paired, but do not immediately connect, tap the
answer/end button.
Jabra CrUISEr2
6
* Phone dependent
PLACe tHe sPeAKeRPHone In YoUR VeHICLe
The Jabra CrUISEr2 sits discreetly and conveniently on the sun
visor using the attached clip. For optimal sound quality place
the Jabra CRUISER2 right in front of you and speak directly
into the speakerphone.
VOL
+
VOL
-
MUTE
VOL
+
VOL
-
MUTE
jabra
HoW to
Answer a call
-
Tap the answer/end button on your speakerphone to answer
a call.
End a call
Tap the answer/end button on your speakerphone to end an
active call.
Make a call
-
-
The call will automatically transfer to your speakerphone*.
If not tap the answer/end button.
Reject a call*
Press the answer/end button.
Activate voice dialing*
-
-
Press the answer/end button. For best results, record the voice-
dialing tag through your speakerphone.
Redial last number*
-
Double tap the answer/end button when the speakerphone is
on and not used.
Jabra CrUISEr2
7
* Phone dependent
Mute/un-mute
-
Press the mute button to mute your microphone during a call
and again to turn mute off.
Adjust sound and volume
-
Tap the volume up or volume down button to adjust the
volume level. (In FM mode you are not able to adjust volume
via Jabra CrUISEr2 – use your car stereo).
Third party calling*
-
This lets you put a call on hold during a conversation and
answer a waiting call.
-
Press the answer/end button once to put the active call on hold
and answer the waiting call.
-
-
Press the answer/end button to switch between the two calls.
Tap the answer/end button to end the active conversation.
Transfer call
-
Press and hold answer/end button until you hear a beep to
transfer a call from the speakerphone to the mobile phone.
-
Press and hold answer/end button until you hear a beep to
transfer a call from the mobile phone to the speakerphone.
Play music*
-
If your phone supports a2DP audio streaming then you can
transfer music or any other type of audio to the CrUISEr2.
Night Driving Mode
-
Press FM and volume up button simultaneously when the
speakerphone is on. The light will then turn off. You can turn
the lights back on with another press. The speakerphone will
always turn on with the lights turned on.
Jabra CrUISEr2
8
* Phone dependent
WHAt tHe LIGHts MeAn
LED Indicator
Speakerphone Status
Connection Status Icon flashes
Pairing mode
rapidly
Connection Status Icon solid blue
Connected
Connection Status Icon flashes
Standby/ Idle
every 2 seconds
Call Status Icon flashes every
Incoming call
1 second
Call Status Icon solid blue
active call
FM Status Icon solid red
FM mode
FM Status Icon flashes every
Frequency scanning
1 second
Call Status Icon and Connection
Language selection
Status Icon flashes
battery Status Icon on (red)
Low battery
ADDItIonAL FeAtURes
Advanced MultiUse™ - Using your Jabra CRUISER2 with two
mobile devices
The Jabra CrUISEr2 supports advanced MultiUse™ and is capable
of having two active mobile phones (or other bluetooth devices)
connected at the same time. This will give you the freedom of
having only one speakerphone to operate both of your mobile
phones.
If you are on a call on one of the connected phones and the other
phone starts ringing you can put the first call on hold with a press
on the answer/end button or reject the second call with a double
tap. If you have two active calls you can switch back and forth
between them with a press on the answer/end button.
Please note that Last Number redial will dial the number from the
last outgoing call independent of the mobile phone.
Jabra CrUISEr2
9
Transfer your phone book to the Jabra CRUISER2
The first time you connect your mobile phone to the CrUISEr2
your phonebook will be transfered.
Caller ID and name announcement
During an incoming call the CrUISEr2 will access the downloaded
phonebook and announce the name of the caller. If the name is
not stored in your phonebook and your phone supports PbaP it
will announce the number of the caller instead.
PLAY MUSIC
Make sure that the speakerphone and mobile phone are connected.
When you play music from your mobile phone it will automatically
transfer to your speakerphone. If your phone does not allow this
feature, press the answer/En button to transfer the music to the
speakerphone. Music will automatically be paused when you have
an incoming call. When the call is ended it will start playing again.
remote control your music via the music buttons.
CHANGE VOICE ANNOUNCEMENT LANGUAGE
Voice announcements give you a more convenient and safe use
of Jabra CrUISEr2. Depending which country you purchased your
Jabra CrUISEr2 in, there are 4 pre-installed languages available.
1
2
3
4
English
Italian
Portuguese
Chinese Mandarine
Additional languages
US English, UK English, Spanish, German, French, Italian, russian,
Polish, brazilian Portuguese, Simplified Chinese can be downloaded
Default language is English. To change language follow these steps:
-
Enter pairing mode by pressing and holdhing the answer/End button
when Jabra CrUISEr2 is on until voice announces: “Pairing mode”
.
-
-
-
Press FM button until current language is announced.
Tap Volume Up or Volume Down button to select a new language.
Select preferred language and press FM button until the new
language is announced.
Jabra CrUISEr2
10
Note: It is possible to turn off the voice announcement function.
When tapping the Volume Up or Volume Down buttons to
select the desired language, the beep tone indicates the voice
announcement function is off. When beep tone is heard press FM
button and the voice announcement function will be off.
USING THE FM TRANSMITTER
The FM transmitter in the speakerphone allows you to transmit
calls and music from your mobile to the car stereo when the
speakerphone and car radio are set to the same frequency.
-
-
Connect your mobile phone and speakerphone.
Press FM button to enter FM mode. The FM Status Icon will turn
solid red and a FM frequency will be announced.
-
-
Manually turn your radio into the same FM frequency and you
are now ready to transmit calls or music from your phone to
your car stereo.
The FM transmitter will automatically turn off after 10 minutes
if the function is not used.
Note: The visor clip works as the FM antenna. The FM transmitter
will not work if the visor clip is removed.
CHANGING FM FREQUENCY
When you enter FM mode the speakerphone will always transmit
calls and music on the latest used FM frequency. For the FM
transmitter to work well, a free radio frequency must be found.
a free radio frequency is one that no commercial and public radio
station is broadcasting on. as you drive and change environment
the FM audio quality could potentially be reduced due to frequency
interferences. If sound performance is unsatisfactory it is possible
to select a new FM frequency.
-
-
-
Enter FM mode.
Press Volume up button until “Searching” is announced.
When a new frequency is found and announced, tune your
radio manually into the same FM frequency. The speakerphone
will automatically save the new frequency.
a tap on the Volume up/Volume down button will change the
frequency on your speakerphone by 0.2 MHz allowing you to fine
tune the signal.
Jabra CrUISEr2
11
USING THE FM TRANSMITTER WHEN VOICE ANNOUNCEMENT
FUNCTION IS OFF
If voice announcement function is turned off you can select any of
the pre-programmed frequency channels in the following order:
LED indication
(FM Frequency selection mode)
Pre-pro-
grammed
Frequency
Chan-
nel No
Blue-
Battery
Call
FM
tooth
status
status
status
status
1
2
3
4
5
6
7
88.1 MHz
88.3 MHz
88.5 MHz
88.7 MHz
88.9 MHz
89.1 MHz
89.3 MHz
Off
Off
On
Off
On
On
On
Off
On
Off
On
Off
On
On
On
Off
Off
On
On
Off
On
Flash
To select the desired FM frequency channel, follow these steps:
-
-
Connect your mobile phone and speakerphone.
Press FM button to enter FM mode. The default frequency
channel is 88.1MHz
-
-
Press the Volume Up or Volume Down button to move to the
next/previous channel.
Manually turn your radio into the same FM frequency and you
are now ready to transmit calls or music from your phone to
your car stereo.
Note 1: While changing frequencies the FM Status Icon flashes
every 1 second.
Note 2: While changing frequencies, a repeated beep-tone will be
heard and frequencies can be recognized by the combinations of
Status Indicators. (See the table above.)
SOFTWARE UPGRADE
It is possible to upgrade the speakerphone software.
Jabra CrUISEr2
12
tRoUBLesHootInG & FAQ
I hear crackling noises
-
bluetooth is a radio technology, which means it is sensitive to
objects between the speakerphone and the connected device.
It is designed for the speakerphone and the connected device
to be used within 33 feet (10 meters) of each other, with no
major objects in the way (walls, etc.).
I cannot hear anything in my speakerphone
-
-
-
Increase the volume in the speakerphone.
Ensure that the speakerphone is paired to a device that is playing.
Make sure your phone is connected to the speakerphone by
tapping the answer/End button.
I am having pairing problems
-
You may have deleted your speakerphone pairing connection
in your mobile phone. Follow the pairing instructions.
I want to reset the pairing list in my speakerphone
The speakerphone registers a list of up to 7 mobile phones.
To remove the list, press and hold the answer/End button, Volume
up button and FM button at the same time. a beep indicates the
list was removed from the speakerphone memory. The next time
you power on, the speakerphone will go into pairing mode as the
first time you powered your new Jabra CrUISEr2 on.
Will the Jabra CRUISER2 work with other Bluetooth equipment?
-
The Jabra CrUISEr2 is designed to work with bluetooth mobile
phones. It can also work with other bluetooth devices that are
compliant with bluetooth version 1.1 or higher and support
a headset, hands-free and/or advance audio distribution profile.
I cannot use Reject call, call on hold, Redial or voice dialing
These features are dependent on the ability of your phone to
support a hands-free profile. Even if the handsfree profile is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices. Please consult
your device manual for details.
Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra CrUISEr2 with 2 mobile
phones.
Jabra CrUISEr2
13
I can not connect speakerphone and radio via FM transmitter
-
Make sure the radio is turned on and speakerphone is in FM
mode (FM Status Icon is on).
-
If your radio when searching is not able to find the FM frequency
set by your speakerphone, the FM frequency must be tuned
in manually on the radio. Please read radio manual to find out
how to manually change frequency on your radio.
-
-
If your radio is in Ta (Traffic announcement) mode, switch Ta
off and your radio should be able to find your speakerphone
when using the search function on the radio. If not tune in
manually.
The sensitivity of the search function on your radio determines
whether it is able to find the frequency set by your speakerphone.
On some radios you are able to adjust the sensitivity thus
making it possible to find the speakerphone frequency when
searching. If not tune in manually.
-
In urban areas it might be difficult to find a clear frequency.
It is therefore advisable to use a frequency in the lower or upper
end of the FM frequency band (e.g. 88.1 or 107.7 MHz) where
you will have the best chance to find a clear frequency.
neeD MoRe HeLP?
1. Web:
(for the latest support info and online User Manuals)
2. E-mail:
australia
China
support.au@jabra.com
support.cn@jabra.com
support.jp@jabra.com
Japan
Singapore
support.sg@jabra.com
Information: info@jabra.com
3. Phone:
australia
China
1-800-738-521
800-858-0789
03-3242-8722
800-101-2329
Japan
Singapore
Jabra CrUISEr2
14
tAKInG CARe oF YoUR sPeAKeRPHone
-
always store the Jabra CrUISEr2 with the power off and safely
protected.
-
avoid storage at extreme temperatures (above 45°C/113°F –
including direct sunlight – or below -10°C/14°F). This can shorten
battery life and may affect operation. High temperatures may
also degrade performance.
-
Do not expose the Jabra CrUISEr2 to rain or other liquids.
GLossARY
1. Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx. 10 meters/33 feet). bluetooth is safe
to use. It is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
bluetooth devices either. Get more information at
www.bluetooth.com.
2. Bluetooth profiles are the different ways that bluetooth
devices communicate with other devices. bluetooth phones
support the headset profile, the hands-free profile or both.
In order to support a certain profile, a phone manufacturer
must implement certain mandatory features within the phone’s
software.
3. Pairing creates a unique and encrypted link between two
bluetooth devices and lets them communicate with each other.
bluetooth devices will not work if the devices have not been
paired.
4. Passkey or PIN is a code that you enter on your bluetooth
enabled device (e.g. a mobile phone) to pair it with your Jabra
CrUISEr2. This makes your device and the Jabra CrUISEr2
recognize each other and automatically work together.
5. Standby mode is when the Jabra CrUISEr2 is passively
waiting for a call. When you ‘end’ a call on your mobile phone,
the speakerphone goes into standby mode.
Dispose of the product according
to local standards and regulations.
Jabra CrUISEr2
15
© 2010 GN Netcom US, Inc. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth® word
mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
© 2010 GN Netcom A/S. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth® word
mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
MADE IN KOREA
TypE: HFS002
|