JVC HV 36P38SUE HV 32P37SUE HV 28P37SUE User Manual

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

CASTELLANO

ITALIANO

PORTUGUÊS

HV-36P38SUE

HV-32P37SUE

HV-28P37SUE

INSTRUCTIONS

COLOUR TELEVISION

FARBFERNSEHGERÄT

TELEVISEUR COULEUR

KLEURENTELEVISIE

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

MANUAL DE INSTRUCCIONES

ISTRUZIONI

TELEVISOR A COLOR

TELEVISORE A COLORI

TELEVISOR A CORES

INSTRUÇÕES

CONTENTS

Setting up your TV ...................................3

Connecting the aerial and VCR ................. 3

Connecting and placing the woofer unit

(HV-36P38SUE only) ............................. 5

Connecting the power cord to the AC

SOUND menu ......................................... 28

STEREO / I • II.........................................28

BASS........................................................ 28

TREBLE ................................................... 28

BALANCE ................................................ 28

HEADPHONE VOLUME .......................... 28

3D CINEMA SOUND................................ 28

outlet....................................................... 6

Putting the batteries into the Remote

control..................................................... 6

Initial settings ............................................. 6

T-V LINK FUNCTIONS .............................. 9

FEATURES menu................................... 29

SLEEP TIMER .........................................29

CHILD LOCK............................................ 29

APPEARANCE.........................................31

BLUE BACK............................................. 31

TV buttons and functions......................11

Turn the Main power on........................... 12

Turn the TV on from standby mode ......... 12

Choose a TV channel .............................. 12

Adjust the volume .................................... 12

SET UP menu ......................................... 32

AUTO PROGRAM.................................... 32

EDIT/MANUAL.........................................32

LANGUAGE ............................................. 36

PICTURE TILT.........................................36

DECODER (EXT-2).................................. 36

EXT SETTING.......................................... 37

Remote control buttons and

functions..............................................13

Turn the TV on or off from standby

mode .................................................... 13

Choose a TV channel and watch images

from external devices ........................... 14

Adjust the volume .................................... 15

Information function ................................. 15

ZOOM function......................................... 16

3D CINEMA SOUND function.................. 17

Return to TV channel instantly................. 17

Using the FREEZE function..................... 17

Using the MULTI-PICTURE function ....... 18

Operating a JVC brand VCR or DVD

Additional preparation .......................... 40

Connecting the external devices.............. 40

CH/CC numbers ..................................... 43

Troubleshooting .................................... 45

Specifications ........................................ 48

player.................................................... 19

Teletext function ....................................20

Basic operation ........................................ 20

Using the List Mode ................................. 20

Hold.......................................................... 21

Sub-page ................................................. 21

Reveal...................................................... 21

Size.......................................................... 21

Index........................................................ 21

Cancel...................................................... 22

Using the TV’s menu..............................23

Basic operation ........................................ 23

PICTURE menu.......................................24

PICTURE MODE ..................................... 24

CONTRAST ............................................. 24

BRIGHT ................................................... 24

SHARP..................................................... 24

COLOUR.................................................. 24

HUE ......................................................... 24

COLOUR TEMP....................................... 24

FEATURES.............................................. 25

Setting up your TV

Caution

• Turn off all the equipment including the TV before connecting anything.

Connecting the aerial and VCR

• The connecting cables are not provided.

• For further details, refer to the manuals provided with the devices to be connected.

→

„ If connecting a VCR, follow A

HV-36P38SUE

Aerial

→

75-ohm

Coaxial

Cable

„ If not connecting a VCR, follow 1.

Back of the TV

To operate T-V LINK functions, a T-V

LINK compatible VCR must be connected to

the EXT-2 terminal on the TV. For details

about T-V LINK functions, see “T-V LINK

FUNCTIONS” on page 9.

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

• A video can be viewed from the VCR

without performing C. For details, refer

to your VCR instruction manual.

• To connect additional external devices,

please see “Connecting the external

devices” on page 40.

21-pin

SCART

Cable

75-ohm

Coaxial

Cable

To Aerial

Input

VCR

• To connect additional audio equipments,

see “Connecting Speakers/Amplifier” on

page 42.

• When a decoder is connected to a T-V

LINK compatible VCR, set the

To Aerial

Output

AV IN/OUT

Terminal

DECODER (EXT-2) function to ON. For

details, see “DECODER (EXT-2)” on

page 36. Otherwise, you will not be able

to view scrambled channels.

HV-32P37SUE/HV-28P37SUE

Aerial

75-ohm

Coaxial

Cable

Back of the TV

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

21-pin

SCART

Cable

75-ohm

Coaxial

Cable

To Aerial

Input

VCR

To Aerial

Output

AV IN/OUT

Terminal

Setting up your TV

„ Rear Panel

HV-36P38SUE

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

1 Aerial socket (page 3)

2 Woofer terminal (pages 5)

3 EXT-1 terminal (pages 3, 37, 40)

4 EXT-2 terminal (pages 3, 9, 37, 40)

5 EXT-3 terminal (pages 37, 40)

6 EXT-4 terminal (pages 37, 40)

7 AUDIO OUT terminal (page 42)

HV-32P37SUE/HV-28P37SUE

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

1 Aerial socket (page 3)

2 EXT-1 terminal (pages 3, 37, 40)

3 EXT-2 terminal (pages 3, 9, 37, 40)

4 EXT-3 terminal (pages 37, 40)

5 EXT-4 terminal (pages 37, 40)

6 AUDIO OUT terminal (page 42)

Setting up your TV

Place the woofer unit within the range

of the connection cable.

It is recommended that the woofer unit be

placed with the speaker facing forwards.

Connecting and placing the

woofer unit (HV-36P38SUE

only)

Connect the supplied woofer connector to the

woofer terminal on the back of the TV.

If the woofer unit is not connected, you will

not be able to enjoy the bass sound.

• Connect so that the lever is raised.

Lever

_EXT-4

_T^-1

_T^-2

_T^-3

Pay attention to the following in order

to prevent unnatural colours from

appearing in the corner of the screen.

• Place the woofer unit at least 20 cm away

from either side of the TV.

• When disconnecting the woofer

connector, do so while pushing the lever.

• Do not place the woofer unit on top of the

TV.

• When the TV is used on a TV stand or

table, do not place the woofer unit

underneath the TV.

„ Placing the woofer unit

As shown in the diagram, affix the

supplied stoppers to the four corners

of the side of the woofer unit that will

be used as the base.

The woofer unit can be used either standing

up or lying down.

There is no difference between the top and

bottom of the woofer unit irrespective of

whether it is being used standing up or lying

down.

Setting up your TV

Connecting the power cord to

the AC outlet

Initial settings

When the TV is first turned on, it enters the

initial setting mode, and the JVC logo is

displayed. Follow the instructions on the on-

screen display to make the initial settings.

Caution

• Operate only from the power source specified

(AC 220 – 240 V, 50 Hz) on the unit.

Yellow button

Blue button

Putting the batteries into the

Remote control

7 buttons

Use two AA/R6 dry cell batteries.

Insert the batteries from the - end, making

sure the + and - polarities are correct.

1 Press the Main power button on the

The Power lamp lights red (for power on),

then green (for TV on) and the JVC logo

is displayed.

HV-36P38SUE

• Follow the warnings printed on the

batteries.

Power lamp

Main power

button

• Battery life is about six months to one

year, depending on your frequency of use.

• The batteries we supply are only for

setting up and testing your TV, please

replace them as soon as necessary.

• If the remote control does not work

properly, replace the batteries.

HV-32P37SUE/HV-28P37SUE

Power lamp

Main power

button

• If the power lamp stays red and does

not change to green:

Your TV is in the standby mode. To

turn the TV on, set the VCR/TV/DVD

switch on the remote control to the TV

position and press the # button. (See

page 13.)

Setting up your TV

• The JVC logo appeares only once

when your TV has been turned on. In

this case, use the “LANGUAGE” and

“AUTO PROGRAM” functions to

make the initial settings. For details,

see “SET UP menu” on page 32.

4 Press the 5 and 6 buttons to

choose the country where you are

now located

5 Press the blue button to start the

AUTO PROGRAM function

The AUTO PROGRAM menu appears

and received TV channels are

2 Press the a button

The LANGUAGE menu appears.

automatically registered in the

Programme numbers (PR).

> LANGUAGE

>> AUTO PROGRAM

CH 28

14%

D0004-EN

D0002(E)-EN

• Perform the “ACI function” operation

(see page 8) when “ACI START/ACI

SKIP” is displayed.

• To cancel the AUTO PROGRAM

function:

3 Press the 5 and 6 buttons to

choose ENGLISH. Then press the

a button

English is set for the on-screen display

description. The COUNTRY menu

appears as a sub-menu of the AUTO

PROGRAM function.

Press the b button.

There are two COUNTRY menus.

Pressing the yellow button changes the

COUNTRY menu as follows:

After the TV channels have been

registered in the Programme

numbers (PR), the EDIT menu

appears

> COUNTRY

> EDIT

CH/CC

CH/CC 32

CH/CC 31

BBC1

START

CH/CC 31

MANUAL

> COUNTRY

MOVE

INSERT DELETE

D0038-EN

• You can proceed to edit the

Programme numbers (PR) using the

EDIT/MANUAL function. For details,

see “EDIT/MANUAL” on page 32.

• If you do not need to use the EDIT/

MANUAL function, go to the next

step.

START

D0003-EN

Setting up your TV

„ ACI function

6 Press the a button to display the

This TV has an ACI function which decodes

the ACI (Automatic Channel Installation)

data.

T-V LINK menu

T-V LINK

DOWNLOAD TV

VCR

Using the ACI function allows all TV

channels transmitted from the cable TV

station to be properly registered quickly

according to the data from the cable TV

station.

EXIT

D0005-EN

If “ACI START/ACI SKIP” appears in

the AUTO PROGRAM menu:

You can use the ACI (Automatic Channel

Installation) function to decode the ACI data

and complete the registration of all the TV

channels in a short period of time.

If you do not have a T-V LINK

compatible VCR connected:

Press the b button to exit the T-V LINK

menu.

The T-V LINK menu disappears.

If you have a T-V LINK compatible

VCR connected to the EXT-2

terminal:

Follow the operating procedure

“Downloading the data to VCR” on

page 9 to transmit the Programme number

(PR) data.

Press the 6 buttons to choose ACI

START. Then press the a button to

start the ACI function

Depending on your cable TV station, there

may be a broadcast selection menu set up by

the cable TV station.

Follow the menu indications and use the

5 and 6 buttons to operate the menu.

After you have made the setting, press the

a button.

• If you have any questions about the items

in the Broadcast Selection menu or how to

operate the menu, please contact your

cable TV station.

• If you don’t want to use the ACI function,

press the 6 buttons to choose ACI

SKIP and then press a.

• When the cable TV broadcast reception is

poor, the ACI function will not work

properly.

• If there is an error in the ACI data itself,

the TV channel cannot be registered

properly. If this happens, turn the ACI

function off (ACI SKIP) and use the

AUTO PROGRAM function.

Alternatively, use the EDIT/MANUAL

function to correct the Programme

number (PR) setting.

Now, the initial settings are complete,

and you can watch the TV

• When your TV can detect the TV channel

name from the TV channel broadcast

signal, it automatically registers the TV

channel name (ID) to the Programme

number (PR) in which the TV channel has

been registered.

• If a TV channel you want to view is not

set to a Programme number (PR),

manually set it using the MANUAL

function. For details, see “EDIT/

MANUAL” on page 32.

• The TV channel is not registered in

Programme number PR 0 (AV). When

you want to register a TV channel to PR 0

(AV), manually set it using the

MANUAL function. For details, see

“EDIT/MANUAL” on page 32.

Setting up your TV

If “ACI ERROR” is displayed in the

AUTO PROGRAM menu:

“ACI ERROR” denotes that the ACI function

is not working properly. Press the 2 button

to start the ACI function again.

If “FEATURE NOT AVAILABLE”

appears at the T-V LINK menu:

Check the following three items. Then

press the 2 button to retry data

transmission.

If “ACI ERROR” still appears even after you

have tried to start the ACI function several

times, press the 3 button to start the AUTO

PROGRAM function. It does not cause any

problem because all the TV channels are

registered to the Programme numbers (PR)

by the AUTO PROGRAM function.

• Has the T-V LINK compatible VCR

been connected to the EXT-2

terminal?

• Has the VCR power been turned on?

• Does the SCART cable that is

connected to the EXT-2 terminal to T-

V LINK compatible VCR have all

proper connections?

„ Downloading the data to VCR

You can transmit to the latest Programme

numbers (PR) data to the VCR with the T-V

LINK function.

T-V LINK FUNCTIONS

When a T-V LINK compatible VCR is

connected to the EXT-2 Terminal on the TV,

it is easier to set up the VCR and to view

videos. T-V LINK uses the following

features:

Caution

• Only when the T-V LINK compatible

VCR is connected to the EXT-2

terminal, this operation is enabled.

• Only when the T-V LINK menu is being

displayed, this operation is enabled.

To use T-V LINK functions:

A T-V LINK compatible VCR is necessary.

The VCR must be connected to the EXT-2

terminal on the TV by a fully wired SCART

cable.

T-V LINK

DOWNLOAD TV

VCR

A “T-V LINK compatible VCR” means a

JVC VCR with the T-V LINK logo or a VCR

with one of the following logos. However,

these VCRs may support some or all of the

features described below. For details, refer to

your VCR instruction manual.

“Q-LINK” (a trademark of Panasonic

Corporation)

EXIT

D0005-EN

1 Turn on the VCR

2 Press the a button

The data transmission begins.

“Data Logic” (a trademark of Metz

DOWNLOAD TV

VCR

Corporation)

“Easy Link” (a trademark of Phillips

Corporation)

“Megalogic” (a trademark of Grundig

Corporation)

“SMARTLINK” (a trademark of Sony

TRANSFER. . . . .

D0037-EN

The T-V LINK menu disappears once the

data transmission ends.

When the T-V LINK menu is

changed over to another menu:

The TV has finished its menu. This new

menu is operated from the VCR. See the

VCR instruction manual for what to do

next.

Corporation)

Setting up your TV

• Generally, the VCR cannot record a TV

channel that cannot be received properly

by the VCR’s tuner, even though you can

view that TV channel on the TV.

However, some VCRs can record a TV

channel by using the TV’s output if that

channel can be viewed on the TV, even

though the TV channel cannot be received

properly by the VCR’s tuner. For details,

refer to your VCR instruction manual.

„ Pre-set Download

Download the registered data on the TV

channels from the TV to the VCR.

The Preset Download function automatically

begins when the initial setting is complete or

whenever the AUTO PROGRAM or EDIT/

MANUAL operations are performed.

• This function can be operated via VCR

operation.

When “FEATURE NOT AVAILABLE” is

displayed:

If “FEATURE NOT AVAILABLE” is

displayed, the download was not performed

correctly. Before trying to download again,

ensure the following:

• The VCR power is turned on.

• The VCR is T-V LINK compatible.

• The VCR is connected to the EXT-2

terminal.

• The SCART cable is fully wired.

„ Direct Rec

“What You See Is What You Record”

You can record to VCR the images that you

are currently viewing on TV by a simple

operation. For details, read the manual for

your VCR. Operate via the VCR. “VCR IS

RECORDING” is displayed.

In the following conditions, the VCR

will stop recording if the TV is turned

off, if the TV channel or input is

switched, or if the menu is displayed

on the TV:

• When recording images from an external

device connected to the TV.

• When recording a TV channel after it has

been unscrambled on a decoder.

• When recording a TV channel by using

the TV’s output because that TV channel

cannot be properly received on the VCR’s

tuner.

• When the VCR is not ready (for example,

when there is no tape inserted), “NO

RECORDING” is displayed.

• Operation via the TV is not possible.

TV buttons and functions

HV-36P38SUE

HV-32P37SUE/HV-28P37SUE

EXT-

EXT-1

EXT

-2

EXT-3

EXT-5

Refer to the pages in parentheses for details.

1 Remote control sensor

2 Power lamp (pages 6, 12)

3 Main power button (pages 6, 12)

4 Headphone jack (mini jack) (page 40)

5 P p buttons/ q buttons (page 12)

6 r (Volume) button (page 12)

7 EXT-5 terminal (pages 37, 40)

3 Main power button (pages 6, 12)

4 Headphone jack (mini jack) (page 40)

5 P p buttons/ q buttons (page 12)

6 r (Volume) button (page 12)

7 EXT-5 terminal (pages 37, 40)

TV buttons and functions

Turn the Main power on

Press the Main power button on the

TV.

The Power lamp lights red and your TV is in

the standby mode.

• If the Power lamp lights green, the TV is

already on.

To turn the Main power off:

Press the Main power button again.

The Power lamp goes off.

Caution

• The main power button on the TV does

not fully isolate the TV from the AC

supply. If you are not going to use this TV

for a long period of time, be sure to

disconnect the AC plug from the AC

socket.

Turn the TV on from standby

mode

Press the P p buttons to turn the TV

on from standby mode

Choose a TV channel

Press the P p buttons to choose a

programme number (PR) or an EXT

terminal

Adjust the volume

1 Press the r (Volume) button

The volume level indicator appears.

2 Press the q buttons while the

volume level indicator is displayed

Remote control buttons and functions

1 Muting button

2 Number buttons

3 Information button

4 c button

5 3 sound button

6 b button

7 7 buttons

8 g (Text) button

9 p p buttons

0 VCR/DVD/Teletext control buttons

- p buttons

= # (Standby) button

~ VCR/TV/DVD switch

! G button

@ Colour button

# X (Multi) button

$ f/g (Freeze/Swap) button

% H button

^ a button

& b button

* r (Volume) q buttons

Turn the TV on or off from

standby mode

Press the # (Standby) button to turn

the TV on or off.

When the TV is turned on, the power lamp

changes from red to green.

• The power can be turned on by pressing

the b button, p p buttons or Number

buttons.

To turn the TV on or off, set the VCR/TV/

DVD switch on the remote control to the

TV position and press the # button.

If the VCR/TV/DVD switch on the remote

control is set to a position other than TV,

the TV will not be turned on or off even if

the # button is pressed.

Remote control buttons and functions

• This TV set has a function which can

automatically change over the input

according to a special signal output

from an external device. (The EXT-4

and EXT-5 terminals do not support

this function.)

• Since this TV is designed to make full

use of the resolution of the original

video source, the motion may appear

unnatural when the video source is

input with 625p progressive-scanning

component signals.

Choose a TV channel and

watch images from external

devices

• If the picture is tilted, correct it. See

“PICTURE TILT” on page 36.

„ Use the number buttons:

Enter the programme number (PR)

of the channel using the number

buttons.

Example:

• PR 6 → press 6

• PR 12 → press 1 and 2

If this occurs, change the output setting

of the connected device to 625i

interlace-scanning component signal

output.

„ Use the p p buttons:

To return to a TV channel:

Press the b button, the p p buttons or

the Number buttons.

Press the p p buttons to

choose the programme number

(PR) you want or an EXT terminal.

To use the Programme number PR 0

(AV):

„ Use the AV button:

Press the AV button to choose an

EXT terminal.

When the TV and VCR are connected only

by the Aerial cable, choosing the Programme

number PR 0 (AV) allows you to view

images from the VCR. Set the VCR RF

channel to the Programme number PR 0

(AV) manually. For details, see “EDIT/

MANUAL” on page 32.

TV mode

EXT modes

Programme

numbers

PR 1 – PR 99

EXT-2

EXT-1

EXT-3

Pressing the G button changes the choice as

follows:

EXT modes

TV mode

EXT-5

EXT-4

EXT-2

EXT-1

Programme

PR 0

numbers

PR 1 – PR 99

• You can choose a video input signal

from the S-VIDEO signal (Y/C signal)

and regular video signal (composite

signal). For details, see “S-IN (S-

VIDEO input)” on page 37.

• If you do not have a clear picture or no

colour appears, change the colour

system manually. See “COLOUR

SYSTEM” on page 26.

EXT-3

EXT-5

EXT-4

• The VCR RF channel is sent as the RF

signal from the VCR.

• Also refer to your VCR instruction

manual.

• If you choose an EXT terminal with no

input signal, the EXT terminal number

becomes fixed on the screen.

Remote control buttons and functions

Time display:

The current time of the teletext data is

displayed.

Adjust the volume

Press the r q buttons to adjust

the volume.

The Volume indicator appears and the

volume changes as you press the r q

buttons.

If the TV has not received a TV channel that

has teletext programmes since it was turned

on, the time display is blank. To view the

current time, choose a TV channel that has

teletext programmes. The time will continue

to be displayed until the TV is turned off

even if you choose other TV channels.

• An incorrect current time is sometimes

displayed when watching videos.

„ Muting the sound

Press the (muting) button to

turn off the sound.

Pressing the (muting) button again

PR LIST:

restores the previous volume level.

The programme number (PR) and EXT

terminal list is displayed.

Information function

Pressing the a button after choosing the

programme number (PR) or EXT terminal

with the 7 buttons will display the

chosen programme or EXT terminal.

• For programme numbers (PR) for which

the CHILD LOCK function is set, the n

(CHILD LOCK) mark is displayed. For

details see “CHILD LOCK” on page 29.

You can see the channel number of the

programme you are watching, the current

time or the PR LIST.

From the PR LIST, you can choose a channel

or EXT terminal.

Press the

(Information) button to

display the information you want to

see.

Pressing the

(Information) button changes

the display as follows:

PR LIST

Channel number display

12 : 00

BBC1

No indication

-10

+10

D0011-EN

Channel number display:

The channel number and channel name

(when the channel name is registered) of the

programme you are watching or the EXT

terminal number is displayed.

Remote control buttons and functions

14:9 ZOOM:

ZOOM function

This mode zooms up the Wide Picture (14:9

Aspect Ratio) to the upper and lower limits

of the screen.

You can change the screen size according to

the picture aspect ratio. Choose the optimum

one from the following ZOOM modes.

AUTO:

When a WSS (Wide Screen Signalling)

signal, which shows the aspect ratio of the

picture, is included in the broadcast signal or

the signal from an external device, the TV

automatically changes the ZOOM mode to

16:9 ZOOM mode or FULL mode according

to the WSS signal.

If a WSS signal is not included, the picture is

displayed in accordance with the ZOOM

mode set with the 4:3 AUTO ASPECT

function.

16:9 ZOOM:

This mode zooms up the Wide Picture (16:9

Aspect Ratio) to the full screen.

16:9 ZOOM SUBTITLE:

This mode zooms up the Wide Picture (16:9

Aspect Ratio) with subtitles to the full

screen.

• For details of the 4:3 AUTO ASPECT

function, see “4:3 AUTO ASPECT” on

page 27.

• When the AUTO (WSS) mode does not

function correctly due to poor WSS signal

quality or when you want to change the

ZOOM mode, press the c button

and change to another ZOOM mode.

FULL:

This mode uniformly stretches the left and

right sides of a normal picture (4:3 aspect

ratio) to fill the wide TV screen.

REGULAR:

Use to view a normal picture (4:3 aspect

ratio) as its original size is.

Use for pictures with a 16:9 aspect ratio that

have been squeezed into a normal picture

(4:3 aspect ratio), you can restore their

original dimensions.

PANORAMIC:

This mode stretches the left and right sides of

a normal picture (4:3 Aspect Ratio) to fill the

screen, without making the picture appear

unnatural.

„ Choose the ZOOM mode

1 Press the c button to display

the ZOOM menu

ZOOM

AUTO

REGULAR

PANORAMIC

14:9 ZOOM

16:9 ZOOM

16:9 ZOOM SUBTITLE

FULL

• The top and bottom of the picture are

slightly cut off.

D0009-EN

• The c button does not work in

the twin pictures mode.

Remote control buttons and functions

2 Press the 6 buttons to choose a

ZOOM mode. Then press the a

button

3D CINEMA SOUND function

You can enjoy sounds with a wider

ambience.

• This function does not work for the sound

from the headphones.

The picture expands and the chosen

ZOOM mode is displayed in about 5

seconds.

• The ZOOM mode may be

automatically changed due to the

control signal from an external device.

When you want to return to the

previous ZOOM mode, choose the

ZOOM mode again.

Press the 3 button and choose

“ON”, “MONO” or “OFF”.

ON:

Choose to add the 3D CINEMA SOUND

effect to stereo sound.

MONO:

„ Adjusting the visible area of the

picture

Choose to add the 3D CINEMA SOUND

effect to monaural sound.

If subtitles or the top (or bottom) of the

picture are cut off, adjust the visible area of

the picture manually.

OFF:

Choose to cancel the 3D CINEMA SOUND

effect.

• The 3D CINEMA SOUND effect can be

adjusted with the “3D CINEMA

SOUND” menu (see page 28).

1 Press the c button

The ZOOM menu appears.

2 Press the a button to display the

ZOOM mode indication

Return to TV channel instantly

Indicator is displayed.

You can return to a TV channel instantly.

16 : 9 ZOOM

D0010-EN

Press the b button

The TV returns to the TV mode and a TV

channel appears.

3 While it is displayed, press the 6

buttons to adjust the visible area

vertically

• You cannot adjust the visible area in

REGULAR or FULL mode.

Using the FREEZE function

You can view the current programme as a

still picture.

1 Press the f button

The still picture of the current picture will

appear.

current

programme

still picture

D0056-EN

Remote control buttons and functions

To cancel the FREEZE function:

Press the f button, the p p buttons or

the number buttons.

• When set to 2-pictures multi, you can

view a TV picture and a picture from

an external device. You can not view a

TV picture on more than one screen at

the same time.

• When 12-pictures multi is set, pictures

from external devices are not

displayed.

• The FREEZE function does not work

while a sub-picture is displayed.

• The still picture cannot be output from

the TV.

• The FREEZE function does not work

for pictures of 625p, 525p and 1125i

signals.

• When set to 2-pictures multi, the main-

picture can be changed by pressing the

p p buttons. The sub-picture screen

can be changed by pressing the p

buttons.

When set to 12-pictures multi and

there are more than 12 pictures, the

next or previous 12 screens can be

displayed by pressing the p buttons.

Using the MULTI-PICTURE

function

1 Press the X button

The MULTI-PICTURE menu appears.

Changing the sub-picture

Displaying the next or

previous 12 screens

D0101-EN

2 Press the 5 buttons to choose

the number of screens and then

press the a button

• When set to 2-pictures multi, press the

g (swap) button to switch the main-

picture and sub-picture.

Choose to return to one screen.

•

2-pictures multi function does not

work for a picture of 1125i signal.

D0102

• A picture of 625p or 525p signal

cannot be displayed as the sub-picture.

Pay attention to the following.

Choose to change to 2-pictures multi.

D0103

- When the EXT-4 picture is a picture

of 625p or 525p signal, you cannot

choose EXT-4 with the p buttons.

- When the EXT-4 picture signal is

changed to 625p, 525p or 1125i

Choose to change to 12-pictures multi.

D0104

2-pictures multi:

signal while the EXT-4 picture is

displayed as the sub-picture, the 2-

pictures multi function is cancelled.

Main-

picture

Sub-

picture

D0056-EN

12-pictures multi:

Still

pictures

Moving

picture

D0058-EN

Remote control buttons and functions

- The pictures cannot be swapped

when a picture of 625p or 525p

signal from EXT-4 is being

Operating a JVC brand VCR or

DVD player

displayed as the main picture.

You can operate a JVC brand VCR or DVD

player. Pressing the button having the same

appearance as the original remote control

button of a device makes the function work

in the same way as the original remote

control.

• Do not press the g (swap) button

while you are recording the TV output

on the VCR. If you do, the TV output

signal will change.

• You cannot view a scrambled channel

in the sub-picture. If the g (swap)

button is pressed when viewing a

scrambled channel in the main-picture

using an external decoder, the channel

you have been viewing in the sub-

picture will appear in both the main-

picture and sub-picture.

• When set to 2-pictures multi and the

headphones are connected, the sound

for the main-picture is output from the

TV speakers and the sound from the

sub-picture is output from the

1 Set the VCR/TV/DVD Switch to the

VCR or DVD position

VCR:

When you are operating the VCR, set the

switch to the VCR position.

• You can turn the VCR on or off with

the # (Standby) button.

DVD:

When you are operating the DVD player,

set the switch to the DVD position.

• You can turn the DVD player on or off

with the # (Standby) button.

headphones.

- Adjust the volume of the sub-picture

sound from the headphones with

“HEADPHONE VOLUME” in the

“SOUND” menu (see page 28).

- The main-picture sound can not be

heard through the headphones.

• When set to 12-pictures multi, press

the 7 buttons to choose the

screen you want to view and the press

the a button to display that picture

on the whole screen.

2 Press the VCR/DVD Control Button

to control your VCR or DVD player

• If your device is not made by JVC,

these buttons cannot be used.

• Even if your device is made by JVC,

some of these buttons or any one of the

buttons may not work, depending on

the device.

• You can use the p buttons to choose

a TV channel. The VCR will receive or

choose the chapter the DVD player

plays back.

• The BLUE BACK function does not

work when the MULTI-PICTURE

function is being used.

• The ZOOM function does not work

when the MULTI-PICTURE function

is being used.

• Some DVD player models use the p

buttons for both operating of Fast

forward/backward functions and

choosing the chapter. In this case, the

253 buttons do not work.

To return the multi-picture to one

screen:

Press the M button, press the 5

buttons to choose one screen, and then

press the a button.

• Pressing the b button will also return

the display to one screen.

You cannot turn the TV on or off when the

VCR/TV/DVD switch is set to the VCR or

DVD position.

When you turn the TV on or off, set the

VCR/TV/DVD switch to the TV position.

Teletext function

4 Choose a teletext page by pressing

the p p buttons, Number buttons

or Colour buttons

VCR/TV/

DVD

To return to the TV mode:

Press the b button or g (Text) button.

• If you have trouble receiving teletext

broadcasts, consult your local dealer or

the teletext station.

• The ZOOM function will not operate

in the TV and text mode or Text mode.

• No menu operations are possible when

viewing a teletext programme.

• Language display depends on the

country which was set on the

COUNTRY menu. If characters on a

Teletext programme do not appear

properly, change the COUNTRY

setting to other country’s. To change

the COUNTRY setting, perform steps

1 and 2 of the “AUTO PROGRAM”

procedure on page 32 and then press

the a button.

Basic operation

You can view three types of teletext

broadcasts on the TV:

FLOF (Fastext), TOP and WST.

1 Choose a TV channel with a teletext

broadcast

2 Set the VCR/TV/DVD switch to the

TV position

Using the List Mode

You can store the numbers of your favourite

teletext pages in memory and call them up

quickly using the colour buttons.

3 Press g (Text) button to display

the teletext

Pressing g (Text) button changes the

mode as follows:

„ To store the page numbers:

1 Press B button to engage the

List mode

The stored page numbers are displayed at

the bottom of the screen.

TV mode

TV and text mode

2 Press a Colour button to choose a

position. Then press the Number

buttons to enter the page number

Text mode

Teletext function

3 Press and hold down A (Store)

button

Reveal

Some teletext pages include hidden text

(such as answers to a quiz).

You can display the hidden text.

The four page numbers blink white to

indicate that they are stored in memory.

„ To call up a stored page:

Each time you press the E (Reveal)

button, text is hidden or revealed

1 Press the B button to engage

the List mode

2 Press a colour button to which a

page has been assigned

Size

To exit the List mode:

You can double the height of the teletext

display.

Press the B button again.

Hold

Press the F (Size) button

You can hold a teletext page on the screen for

as long as you want, even while several other

teletext pages are being received.

Press the C (Hold) button

Hold indication

Index

To cancel the Hold function:

Press C (Hold) button again.

You can return to the index page instantly.

Press G (Index) button

Returns to page 100 or a previously specified

page.

Sub-page

Some teletext pages include sub-pages that

are automatically displayed.

1 Choose a teletext page that

includes sub-pages

Sub-page numbers that can be viewed are

automatically displayed at the top of the

screen.

2 Press the 5 buttons to choose a

sub-page number

Teletext function

Cancel

You can search for a teletext page while

watching TV.

1 Press the Number button to enter a

page number, or press a Colour

button

The TV searches for a teletext page.

2 Press H (Cancel) button

The TV programme appears. When the

TV finds the teletext page, its page

number appears in the upper left of the

screen.

3 Press H (Cancel) button to return

to a teletext page when the page

number is on the screen

• The TV mode cannot be resumed even

by pressing the H (Cancel) button. A

TV programme is temporarily

displayed instead of the teletext

programme.

Using the TV’s menu

This TV has a number of functions which

you can operate using menus. To fully utilize

your TV’s functions, you need to fully

understand the basic menu operating

techniques.

Types of menu

PICTURE menu

Choose to set the screen

settings.

D0106

D0107

D0108

SOUND menu

Buttons used to operate the menus

Choose to set the sound settings.

FEATURES menu

Choose to set the sleep timer

and child lock settings.

SET UP menu

Choose to edit the channels or

set the display language

settings.

D0109

The menu guide area can be made to appear

and disappear for some menus.

While the menu is displayed, press the h

button to change between the guide area

being displayed and not displayed.

Basic operation

1 Press the H button to display

the menu bar

>> 4:3 AUTO ASPECT

PICTURE

PANORAMIC

REGULAR

14:9 ZOOM

D0105-EN

2 Press the 5 buttons to choose

the menu you want to use and then

press the a button

D0017-EN

Guide area

PICTURE

D1105-EN

Chosen

menu name

>> 4:3 AUTO ASPECT

PANORAMIC

REGULAR

14:9 ZOOM

3 Press the 6 buttons to choose

the item to be set, press the 5

buttons to set the item, and then

press the a button

D1017-EN

• The guide area for some menus will still

be displayed even if the h button is

pressed. This is not a malfunction.

If there are sub-menus, use the 7

buttons to operate them.

• Press the b button to return to

the previous menu.

• Press the b or H button to exit

from the menu.

PICTURE menu

PICTURE

COLOUR

STANDARD

PICTURE MODE

CONTRAST

BRIGHT

SHARP

COLOUR

You can adjust the picture colour.

2 :lighter

HUE

COLOUR TEMP.

FEATURES

3 : deeper

COOL

RESET

HUE

D0014-EN

You can adjust the picture tint.

2 :reddish

3 : greenish

• While the PICTURE menu is displayed,

pressing the blue button will set the

CONTRAST, BRIGHT, SHARP,

COLOUR, HUE settings to their default

settings.

• You can change the HUE setting (picture

hue) when the colour system is NTSC

3.58, NTSC 4.43.

COLOUR TEMP.

PICTURE MODE

You can select one of three COLOUR

TEMP. modes (three tones of white) to adjust

the white balance of the picture. Since white

is the colour which is used as a reference for

all the other colours, changing the COLOUR

TEMP. mode affects the appearance of all

the other colours on the screen.

You can choose one of three PICTURE

MODEs to adjust the picture settings

automatically.

BRIGHT:

Heightens contrast and sharpness.

COOL:

STANDARD:

A bluish white. Using this mode when

watching bright pictures allows you to enjoy

a more vivid and bright picture.

Standardizes picture adjustment.

SOFT:

Softens contrast and sharpness.

NORMAL:

The normal white colour.

CONTRAST

WARM:

You can adjust the picture contrast.

2 :lower

3 : higher

A reddish white. Using this mode when

watching films allows you to enjoy colours

that are characteristic of films.

BRIGHT

You can adjust the picture brightness.

2 :darker

3 : brighter

SHARP

You can adjust the picture sharpness.

2 :softer

3 : sharper

PICTURE menu

• The MAX setting is not suitable for high-

quality pictures which contain very little

noise.

FEATURES

Choose FEATURES and press the a or 3

button to display the sub-menu.

„ Super DigiPure

The Super DigiPure function uses the latest

in digital technology to give you a natural-

looking picture. The Super DigiPure function

includes the following two functions.

> FEATURES

DIGITAL VNR

Super DigiPure

MOVIE THEATRE

Colour DigiPure

COLOUR SYSTEM

4:3 AUTO ASPECT

AUTO(LOW)

AUTO

DigiPure function:

This function helps to create a natural-

looking picture by eliminating unnecessary

edges from high-contrast and crisp images.

For images with low-contrast, edges are

added to produce a sharper, more detailed

picture.

You can choose from the three DigiPure

function settings of AUTO, MIN and MAX.

• If you set the DigiPure effect too high on

a low-quality picture that contains a lot of

noise, this may actually make the noise

worse. We recommend you use the

AUTO setting if you can.

D1015-EN

„ DIGITAL VNR

The DIGITAL VNR function cuts down the

amount of noise in the original picture.

You can choose from the four DIGITAL

VNR function settings of AUTO(LOW),

AUTO(HIGH), MIN and MAX.

AUTO(LOW)/AUTO(HIGH):

The TV will automatically adjust the level of

the DIGITAL VNR effect to match the

amount of noise in the picture, giving you the

best possible picture.

• If you set the DIGITAL VNR effect too

high it can make the picture less sharp. It

is recommended to use the AUTO(LOW)

setting if you can. If you set the DIGITAL

VNR function to AUTO(LOW)but still

notice some noise, change the setting

from AUTO(LOW) to AUTO(HIGH).

Picture motion compensation

function:

This function displays fast-moving pictures

(for example, the players or ball in a football

game) more smoothly and naturally on the

screen.

• The effect level of the picture motion

compensation function cannot be

changed. The effect level is the same no

matter which of the AUTO, MIN or MAX

settings is used.

MIN:

The level of the DIGITAL VNR effect is set

to the minimum. If you set the DIGITAL

VNR function to AUTO(LOW) but feel that

the sharpness of the original picture has not

been reproduced fully, change the setting

from AUTO(LOW) to MIN.

• The MIN setting is not suitable for low-

quality pictures which contain a lot of

noise.

AUTO:

The TV will automatically adjust the level of

the DigiPure effect to match the amount of

noise in the picture, giving the best possible

picture.

MAX:

The level of the DIGITAL VNR effect is set

to the maximum. If you set the DIGITAL

VNR function to AUTO(HIGH) but still

notice some noise, change the setting from

AUTO(HIGH) to MAX.

PICTURE menu

MIN:

OFF:

The level of DigiPure effect is set to the

minimum. When you set the Super DigiPure

function to AUTO and notice some noise,

change the setting from AUTO to MIN.

• The MIN setting is not suitable for high-

quality pictures which contain very little

noise.

Colour DigiPure doesn't work. This gives a

less clear picture than when this function is

turned on.

„ COLOUR SYSTEM

The colour system is chosen automatically.

However, if the picture is not clear or no

colour appears, choose the colour system

manually.

MAX:

The level of DigiPure effect is set to the

maximum. If you set the Super DigiPure

function to AUTO but feel that the original

picture quality has not been reproduced fully,

change the setting from AUTO to MAX.

• The MAX setting is not suitable for low-

quality pictures which contain a lot of

noise.

1 Choose COLOUR SYSTEM. Then

press the a or 3 button

The sub-menu of the COLOUR SYSTEM

function appears.

>> COLOUR SYSTEM

MAIN

SUB

PAL

AUTO

OFF:

The Super DigiPure function is turned off.

„ MOVIE THEATRE

The MOVIE THEATRE function displays a

cinema film picture more smoothly and

naturally on the screen.

D0016-EN

2 Press the 5 buttons to choose

AUTO:

MAIN or SUB

The television automatically recognizes the

type of signal and turns the function on and

off.

MAIN:

You can change the colour system of the

main-picture.

SUB:

You can change the colour system of the

sub-picture.

• Choose MAIN when a sub-picture is

not displayed.

ON:

This function is turned on.

OFF:

This function is turned off.

• The motion may appear unnatural when

viewing images with the NTSC colour

system. When the MOVIE THEATRE

function is set to AUTO or ON, the

motion may appear unnatural when

viewing images with the NTSC colour

system.

3 Press the 6 buttons to choose

the appropriate colour system.

Then press the a button

PAL:

PAL system

SECAM:

SECAM system

NTSC 3.58:

NTSC 3.58 MHz system

„ Colour DigiPure

Makes the colour outline stand out and

increases the sharpness giving a clearer

picture.

NTSC 4.43:

NTSC 4.43 MHz system

ON:

Colour DigiPure works. Normally use with

this function turned on.

PICTURE menu

AUTO:

This function detects a colour system

from the input signal. You can only use

this when you are viewing a picture from

programme number PR 0 (AV), or an

EXT terminal.

• The AUTO function may not function

properly if you have poor signal quality.

If the picture is abnormal in the AUTO

function, choose another colour system

manually.

• When in the Programme numbers PR 0

(AV) to PR 99, you cannot choose NTSC

3.58 or NTSC 4.43.

• “COLOUR SYSTEM” cannot be chosen

when you are watching the EXT-4

picture.

„ 4:3 AUTO ASPECT

You can choose one of three ZOOM modes,

REGULAR, PANORAMIC or 14:9 ZOOM,

as the ZOOM mode for the normal picture

(4:3 aspect ratio).

1 Choose 4:3 AUTO ASPECT then

press the a button

>> 4:3 AUTO ASPECT

PANORAMIC

REGULAR

14:9 ZOOM

D0017-EN

2 Press the 6 buttons to choose a

ZOOM mode

SOUND menu

SOUND

BALANCE

STEREO/

BASS

TREBLE

BALANCE

HEADPHONE VOLUME

3D CINEMA SOUND

You can adjust the volume balance between

the left and right speaker.

2 :turn the left speaker’s volume level up.

3 : turn the right speaker’s volume level up.

HEADPHONE VOLUME

D0019-EN

Adjust the volume of the sub-picture sound

which is heard through the headphones when

set to 2-pictures multi.

2 :Reduce volume

3 : Increase volume

• Functions in the “SOUND” menu other

than “HEADPHONE VOLUME” work

for the TV speakers. They do not work for

the sound from the headphones.

• When the headphones are connected and

only one screen is displayed, only

• When not set to 2-pictures multi, the

headphone volume is adjusted with the

r q (volume) buttons.

“HEADPHONE VOLUME” can be used.

STEREO / I • II

When you are viewing a bilingual broadcast

programme, you can choose the sound from

Bilingual I (Sub I) or Bilingual II (Sub II).

When the stereo broadcasting is received

poorly, you can change from stereo to mono

sound so that you can hear the broadcast

more clearly and easily.

3D CINEMA SOUND

Press the 3 button to set the 3D CINEMA

SOUND effect when 3D CINEMA SOUND

is set to ON or MONO.

Choose 3D CINEMA SOUND. Then

press the a or 3 button to display

the sub-menu.

s: Stereo sound

v : mono sound

> 3D CINEMA SOUND

t : Bilingual I (sub I)

u : Bilingual II (sub II)

SURROUND

BASS BOOST

MID

• The sound mode you can choose differs

depending on the TV programme.

• This function does not work in the EXT

modes.

D0111-EN

„ SURROUND

Adjust the surround effect.

You can choose HIGH, MID or LOW.

Choosing LOW will reduce the surround

effect and choosing HIGH will increase the

surround effect.

BASS

You can adjust the low tone of the sound.

2 :weaker

3 : strong

„ BASS BOOST

Adjust the bass sound.

You can choose HIGH, MID or LOW.

Choosing LOW will reduce the bass sound

and choosing HIGH will increase the bass

sound.

TREBLE

You can adjust the high tone of the sound.

2 :weaker

3 : strong

FEATURES menu

To cancel the SLEEP TIMER

function:

Press the 2 button to set a period of time

to “OFF”.

FEATURES

SLEEP TIMER

CHILD LOCK

APPEARANCE

BLUE BACK

TYPE A

CHILD LOCK

When there is a TV channel you wish your

children not to watch, you can use the

CHILD LOCK function to lock out the TV

channel. Even when a child chooses a

Programme number (PR) in which a locked

TV channel has been registered, the screen

will change to blue and displays n (CHILD

LOCK) so the TV channel cannot be viewed.

Unless you enter a pre-set ID number by a

special operation, the lock cannot be released

and the child cannot view the TV channel

programmes.

D0023-EN

SLEEP TIMER

You can set the TV to automatically turn off

after a specified period of time.

1 Choose SLEEP TIMER. Then press

the a or 3 button

A Sub-menu of the SLEEP TIMER

function appears.

> SLEEP TIMER

„ To set the CHILD LOCK function

120

OFF

1 Choose CHILD LOCK, then press

the 0 button

“SET ID NO.” (ID number setting screen)

appears.

D0024-EN

>> SET ID NO.

2 Press the 5 buttons to set the

period of time.

0040

Then press the a button

You can set the period of time a

maximum of 120 minutes (2 hours) in 10

minute increments.

D0025-EN

2 Set the ID number to your liking

• One minute before the SLEEP TIMER

function turns off the TV, “GOOD

NIGHT!” appears.

• The SLEEP TIMER function cannot

be used to turn off the TV’s main

power.

1 Press the 6 buttons to choose

a number.

2 Press the 5 buttons to move

the cursor.

• When the SLEEP TIMER function is

on, you can display the Sub-menu of

the SLEEP TIMER function again to

confirm and/or change the remaining

period of time of the SLEEP TIMER

function. Press the a button to exit

the menu after confirming and / or

changing the remaining time.

FEATURES menu

3 Press the a button

2 Press the

(Information) button to

The Sub-menu of CHILD LOCK appears.

display “ID NO.” (ID NO. input

screen)

> CHILD LOCK

CH/CC 31

BBC1

ID NO.

D0028-EN

3 Press the Number buttons to enter

the ID number

LOCK

The lock is temporarily released so you

can view the TV channel.

D0026-EN

If you have forgotten the ID

number:

Perform step 1 of “To set the CHILD

LOCK function”. After confirming the ID

number, press the b button to exit the

menu.

4 Press the 6 buttons to choose a

TV channel

Every time you press the 6 buttons, the

Programme number (PR) changes, and the

picture of the TV channel registered in the

Programme number (PR) is displayed on

the screen.

• Even if you reset the lock temporarily,

it does not mean that the CHILD

LOCK function set for the TV channel

is cancelled. The next time anyone

attempts to view the TV channel, it

will be locked again.

• When you would like to cancel the

CHILD LOCK function, you must

perform the operation “To set the

CHILD LOCK function” again.

• To disable easy choosing of a

Programme number (PR) in which a

locked TV channel has been

5 Press the blue button and set the

CHILD LOCK function.

Then press the a button

n (CHILD LOCK) appears and the TV

channel is locked.

To reset the CHILD LOCK function:

Press the blue button again.

n (CHILD LOCK) disappears.

To disable easy resetting of the CHILD

LOCK function, the menu disappears by

choosing the CHILD LOCK function and

pressing the a button as in the ordinary

menu operation.

registered, the Programme number

(PR) has been set that it cannot be

chosen by the 6 buttons or the

operation buttons at the TV.

• To disable easy resetting of the lock,

“ID NO.” (ID NO. input screen) is set

so that it cannot appear unless you

„ To view a locked TV channel

1 Choose a Programme number (PR)

in which a TV channel locked with

the Number buttons or PR LIST

The screen changes to blue and the n

(CHILD LOCK) appears. You cannot

view the TV channel.

press the

(Information) button.

D0027-EN

FEATURES menu

APPEARANCE

Press the 5 button and choose the format

in which the channel number is displayed

from the three types: TYPE A, TYPE B and

TYPE C.

BLUE BACK

You can set the TV to automatically change

to a blue screen and mute the sound if the

signal is weak or absent, or when there is no

input from an external device.

ON:

This function is turned on.

OFF:

This function is turned off.

SET UP menu

SET UP

EDIT/MANUAL

AUTO PROGRAM

EDIT/MANUAL

LANGUAGE

PICTURE TILT

DECODER(EXT-2)

EXT SETTING

The EDIT/MANUAL functions are divided

into two types: editing of the current

Programme numbers (PR) (EDIT functions)

and manual registration of a TV channel you

want to view to the Programme number (PR)

(MANUAL function). The details about

these functions are as follows:

D0029-EN

MOVE:

This function changes a Programme number

(PR) of a TV channel.

AUTO PROGRAM

ID:

The AUTO PROGRAM function TV

channel automatic registration which was

performed in the “Initial settings” (page 6)

can be preformed again.

This function registers a Channel name (ID)

to a TV channel.

INSERT:

This function adds a new TV channel in the

current Programme numbers (PR) list by

using the CH/CC number.

• You cannot use the INSERT function if

you do not know a Channel number of a

TV channel. Use the MANUAL function

to register a TV channel in the

Programme number (PR).

1 Choose AUTO PROGRAM, then

press the a or 3 button

The COUNTRY menu appears as a sub-

menu of the AUTO PROGRAM function.

There are two COUNTRY menus.

Pressing the yellow button changes the

COUNTRY menu as follows:

> COUNTRY

DELETE:

This function deletes an unnecessary TV

channel.

MANUAL:

START

This function manually registers a new TV

channel in a Programme number (PR).

Caution

• Using the MOVE, DELETE or INSERT

function rewrites the current Programme

numbers (PR) list. Resultingly, the

Programme number (PR) of some of the

TV channels will change.

> COUNTRY

• Using the MANUAL function for a TV

channel for which the CHILD LOCK

function has been set cancels the CHILD

LOCK function for the TV channel.

• Using the MANUAL function for a TV

channel for which the DECODER (EXT-2)

function has been set to ON returns the

setting of the DECODER (EXT-2) function

for the TV channel to OFF.

START

D0003-EN

2 Press the 5 and 6 buttons to

choose the country where you are

now located

3 Perform steps 5 and 6 of the “Initial

settings” (page 7).

• When a TV channel has already been

registered in PR 99, using the INSERT

function deletes the TV channel.

SET UP menu

• The CH/CC number is a number unique to

the TV and corresponding to the Channel

number of a TV channel. For the

relationship of a Channel number and a

CH/CC number, see “CH/CC numbers”

on page 43.

„ Basic operation

1 Choose EDIT/MANUAL, then press

the a or 3 button

The EDIT menu appears.

> EDIT

CH/CC

CH/CC 32

CH/CC 31

„ MOVE

BBC1

1 Press the 6 buttons to choose a

TV channel

CH/CC 31

Every time you press the 6 buttons, the

Programme number (PR) is changed over,

and the picture of the TV channel

registered in the Programme number (PR)

appears on the screen.

MANUAL

MOVE

INSERT DELETE

D0038-EN

2 Follow the operation description of

a function you want to use and

operate the function

2 Press the 3 button to start the

MOVE function

> EDIT

CH/CC

CH/CC 32

3 Press the a button to complete

the settings

BBC1

CH 31

The T-V LINK menu appears.

T-V LINK

CH/CC 31

DOWNLOAD TV

VCR

STORE

D0030-EN

EXIT

D0005-EN

3 Press the 6 buttons to choose a

new Programme number (PR)

If you do not have a T-V LINK

compatible VCR connected:

Press the b button to exit the T-V LINK

menu.

To cancel the MOVE function:

Press the b button.

The T-V LINK menu disappears.

4 Press the 2 button to change the

Programme number (PR) of a TV

channel to a new Programme

number (PR)

If you have a T-V LINK compatible

VCR connected to the EXT-2 terminal:

Follow the operating procedure

“Downloading the data to VCR” on page 9 to

transmit the Programme number (PR) data.

• For Programme number PR 0, “AV”

appears in the Programme numbers (PR)

list.

• An EXT terminal number does not appear

in the Programme numbers (PR) list.

SET UP menu

„ DELETE

4 Press the blue button to display the

ID LIST (channel name list)

1 Press the 6 buttons to choose a

TV channel

> EDIT

Every time you press the 6 buttons, the

Programme number (PR) is changed over,

and the picture of the TV channel

registered in the Programme number (PR)

appears on the screen.

CH/CC

CH/CC 32

CH/CC 31

ID LIST

MBC

MCM

MDR

MOVIE

MTV

BBC1

MTV3

CH/CC 31

2 Press the yellow button to delete

the TV channel

D0033-EN

The TV channel is deleted from the

Programme numbers (PR) list.

5 Press the 6 buttons to choose

the Channel name (ID)

„ ID

To cancel the ID function:

Press the b button.

1 Press the 6 buttons to choose a

TV channel

Every time you press the 6 buttons, the

Programme number (PR) is changed over,

and the picture of the TV channel

registered in the Programme number (PR)

appears on the screen.

6 Press the a button to register a

Channel name (ID) to a TV channel

• You can register your unique Channel

name (ID) to the TV channel. When

step 3 is completed, do not go to step

4, but press the 5 buttons to move

the cursor and the 6 buttons to

choose a character for completing the

Channel name (ID). Then press the

a button to register the Channel

name (ID) to the TV channel.

2 Press the red button to start the ID

function

> EDIT

CH/CC

CH/CC 32

CH/CC 31

BBC1

CH/CC 31

Before performing INSERT or

MANUAL operation

ID LIST

• If you register the TV channel (SECAM-

L system) from a French station, be sure

to set the COUNTRY setting to

FRANCE. If the COUNTRY setting is

not set to FRANCE, perform steps 1 and 2

of the “AUTO PROGRAM” (page 32)

procedure and set the COUNTRY setting

to FRANCE before pressing the a

button.

• A CH/CC number unique to this TV and

corresponding to the Channel number of a

TV channel is required. Find the

corresponding CH/CC number from a

table “CH/CC numbers” on page 43 based

on the Channel number of the TV

channel.

D0031-EN

3 Press the 6 buttons to choose

the first character of a Channel

name (ID) you want to attach to the

TV channel

> EDIT

CH/CC

CH/CC 32

CH/CC 31

BBC1

CH/CC 31

ID LIST

D0032-EN

SET UP menu

• When the COUNTRY setting is not

FRANCE, use a two-digit CH/CC

number. When the COUNTRY setting is

FRANCE, use a three-digit CH/CC

number.

„ MANUAL

1 Press the 6 buttons to choose a

Programme number (PR) to which

you want to register a new TV

channel

„ INSERT

2 Press the blue button to activate

the MANUAL function

1 Press the 6 buttons to choose a

Programme number (PR) for which

you will register a new TV channel

At the right side following the CH/CC

number, the SYSTEM (broadcasting

system) of the TV channel appears.

2 Press the green button and start

the INSERT function

> MANUAL

CH/CC

CH/CC 32

CH/CC 31

> EDIT

BBC1

CH/CC

CH/CC 32

CH/CC 31

BBC1

(

CH/CC 31 B / G

)

CH/CC

CH/CC 31

SEARCH+

FINE-

SYSTEM

FINE+

SEARCH-

D0035-EN

CH/CC

To cancel the MANUAL function:

D0034-EN

Press the b button.

3 Press the 6 buttons to choose

“CC” or “CH” according to the CH/

CC number of the TV channel

3 Press the 3 button to choose the

SYSTEM (broadcasting system) for

a TV channel you want to register

When the COUNTRY setting is

FRANCE:

Choose “CH1”, “CH2”, “CC1” or “CC2”.

TV channel (SECAM-L system)

from a French station:

Set the SYSTEM to “L”. If it is set to one

other than “L”, you cannot receive the TV

channel of the SECAM-L system.

To cancel the INSERT function:

Press the b button.

Other TV channels:

4 Press the Number buttons to enter

the remaining CH/CC number

The TV shifts to registration mode.

When the registration is completed, the

picture of the TV channel appears on the

screen.

If you do not know the correct

broadcasting system, set the SYSTEM to

“B/G”. If “B/G” is not correct, it results in

the fact that you will not hear the sound

normally when the TV detects a TV

channel. In this case, retry to set the

SYSTEM again correctly so that no

problem arises.

• The CH/CC number is a number

indicating the broadcast frequency to

the TV. If the TV cannot detect the TV

channel corresponding to the broadcast

frequency indicated by the CH/CC

number, a picture in the no-signal state

appears.

4 Press the green or red button to

search for a TV channel

Scanning stops when the TV finds a TV

channel. Then the TV channel is

displayed.

SET UP menu

5 Press the green or red button

repeatedly until the TV channel you

want appears

PICTURE TILT

There are cases where the Earth’s magnetic

force may make the picture tilt or make

unnatural colours appear in the corner of the

screen. If this happens, you can correct it.

If the TV channel reception is poor:

Press the blue or yellow button to fine-

tune the TV channel.

1 Choose PICTURE TILT, then press

the a or 3 button

If you cannot hear the normal

sound even when the picture of the

TV channel appears normally:

The SYSTEM setting is wrong. Press the

3 button and choose a SYSTEM that has

normal sound.

The sub-menu of the PICTURE TILT

function appears.

>> PICTURE TILT

6 Press the a button and register

the TV channel to a Programme

number (PR)

The normal EDIT menu is resumed.

D0018-EN

2 Press the 6 buttons until the

picture becomes level. Then press

the a button

LANGUAGE

The LANGUAGE setting which was

performed in the “Initial settings” (page 6)

can be changed.

DECODER (EXT-2)

1 Choose LANGUAGE, then press

the a or 3 button

When connecting a Decoder with a T-V

LINK compatible VCR connected to the

EXT-2 terminal, use the DECODER (EXT-

2) function to unscramble the scrambled TV

channels.

A sub-menu of the LANGUAGE function

appears.

> LANGUAGE

1 Turn on the Decoder power

2 Display the TV channel capable of

being unscrambled with the

Decoder on the TV

Even if the Decoder is functioning, a

scrambled picture appears at this time.

D0002(E)-EN

3 Display the SET UP menu and

choose DECODER (EXT-2)

2 Press the 5 and 6 buttons to

choose a language. Then press the

a button

SET UP

AUTO PROGRAM

EDIT/MANUAL

LANGUAGE

PICTURE TILT

DECODER(EXT-2)

EXT SETTING

D0029-EN

SET UP menu

4 Press the 5 buttons to choose

EXT SETTING

An unscrambled picture appears.

1 Choose EXT SETTING, then press

the a or 3 button

To cancel the DECODER (EXT-2)

function:

Press the 5 buttons to choose OFF.

The EXT SETTING menu appears.

> EXT SETTING

5 Press the a button to complete

the setting

EXT-1

EXT-3

EXT-5

DUBBING

EXT-2

The T-V LINK menu appears.

T-V LINK

EXT-4

DOWNLOAD TV

VCR

ID LIST

S-IN

D0020-EN

EXIT

D0005-EN

2 Follow the operation description of

a function you want to use and

operate the function

You can send the programme numbers

data to a VCR with the T-V LINK

function.

S-IN:

6 Turn on the VCR, and then press

the a button to transmit the data

to VCR

You can enjoy high-quality picture of the

2 S-VIDEO signal (Y/C signal).

ID LIST:

You can have a name corresponding to

the devices connected for each EXT

terminal.

DUBBING:

You can choose a signal source to be

output from an EXT-2 terminal.

The T-V LINKmenu disappears once the

data transmission ends.

7 If you have another TV channel

capable of being unscrambled with

a Decoder, repeat steps 2 through 6

If for some reason the DECODER (EXT-

2) function has been set to “ON” but the

TV channel cannot be unscrambled, check

the following:

• Has the Decoder been connected to the

VCR properly according to the VCR

and Decoder Instruction Manuals?

• Has the Decoder power been turned

on?

„ S-IN (S-VIDEO input)

When connecting a device (such as S-VHS

VCR) which enables an S-VIDEO signal (Y/

C signal) to be output, you can enjoy high-

quality picture of the S-VIDEO signal (Y/C

signal).

• Can the TV channel be unscrambled

with a Decoder?

• Is it necessary to change the VCR

settings in order to connect the

Decoder? Confirm that the VCR is set

properly by rechecking the VCR

Instruction Manual.

SET UP menu

Preparation:

• The EXT-1 terminal does not support S-

VIDEO signal (Y/C signal) and you

cannot set S-IN (S-VIDEO input) in the

EXT-1 terminal.

• At first, read the Device Instruction

Manual and “Additional preparation” on

page 40 to connect the device to the TV

properly. Second, follow the Device

Instruction Manual to set the device so

that an S-VIDEO signal (Y/C signal) can

be output to the TV.

• Do not set S-IN (S-VIDEO input) to the

EXT terminal connected to a device

which cannot output an S-VIDEO (Y/C

signal). If it is set wrongly, a picture

cannot appear.

• Setting S-IN (S-VIDEO input) changes

the head character from “E” to “S”. For

example, “E2” is changed to “S2”.

• Even a device which enables the S-

VIDEO signal (Y/C signal) to be output

may output a regular video signal

(composite signal) depending on the

device setting. If a picture cannot appear

because S-IN (S-VIDEO input) setting

has been made, read the device Instruction

Manual carefully again to check for the

device settings.

1 Press the 5 or 6 buttons to

choose an EXT terminal

> EXT SETTING

EXT-1

EXT-3

EXT-5

DUBBING

EXT-2

„ ID LIST

You can have a name corresponding to the

devices connected for each EXT terminal.

Giving a name to an EXT terminal makes the

EXT terminal number appear on the screen,

together with the name.

EXT-4

ID LIST

1 Press the 5 or 6 buttons to

S-IN

choose an EXT terminal

D0110-EN

2 Press the blue button to display the

name list (ID LIST)

2 Press the yellow button and set the

S-IN (S-VIDEO input).

Then press the a button

> EXT SETTING

EXT-1

EXT-3

EXT-5

DUBBING

EXT-2

ID LIST

An S-IN (S-VIDEO input) mark is

displayed. You can view an S-VIDEO

signal (Y/C signal) instead of the regular

video signal (composite signal).

VHS

S-VHS

DVC

CAM

SAT

STB

EXT-4

GAME

DVD

DVR

To cancel the S-IN (S-VIDEO input)

setting:

Press the yellow button and turn off S-IN (S-

VIDEO input) mark. The regular video

signal (composite signal) pictures are

resumed.

D0021-EN

SET UP menu

TV:

3 Press the 6 buttons to choose a

name. Then press the a button

The ID LIST disappears and the name is

assigned to the EXT terminal.

The picture and sound of the TV channel

you are currently viewing are output from

the EXT-2 terminal.

• You cannot assign an EXT terminal

name not found in the name list (ID

LIST).

• During dubbing, you cannot turn off

the TV. Turning off the TV also turns

off the output from the EXT-2

terminal.

• When you choose an EXT terminal as

an output, you can view a TV

programme or a picture from the other

EXT terminal while dubbing the

picture from a device connected to the

EXT terminal onto a VCR connected

to the EXT-2 terminal.

To erase a name assigned to the

EXT terminal:

Choose a blank space.

4 Press the a button to complete

the setting

„ DUBBING

You can choose a signal source to be output

from an EXT-2 terminal.

• The RGB signals from the TV games

cannot be output. Teletext programmes

cannot be output.

You can choose any one of the output signal

of the device connected to the EXT terminal

and the picture and sound from a TV channel

you are currently viewing to output it to the

EXT-2 terminal.

1 Press the 5 buttons to choose

the arrow from the menu

> EXT SETTING

EXT-1

EXT-3

EXT-5

DUBBING

EXT-2

EXT-4

D0022-EN

2 Press the 6 buttons to choose an

EXT terminal or TV.

Then press the a button

The arrow in the menu represents a signal

flow. The left side of the arrow denotes a

signal source output from the EXT-2

terminal.

EXT-1/EXT-3/EXT-5:

The output signal of the device connected

to an EXT terminal passes through the TV

and is output from the EXT-2 terminal.

Additional preparation

Connecting the external devices

Connect the devices to the TV, paying

attention to the following connection

diagram.

1 VCR (composite signal)

2 VCR (composite signal/S-VIDEO signal)

3 T-V LINK compatible VCR (composite

signal/S-VIDEO signal)

4 Decoder

5 DVD player (composite signal/S-VIDEO

signal)

6 DVD player (composite signal/RGB

signal)

7 DVD player (component video signals;

Pr/Pb/Y)

8 TV game (composite signal/RGB signal)

9 TV game (composite signal/S-VIDEO

signal)

0 Headphones

- Camcorder (composite signal/S-VIDEO

signal)

Before connecting anything:

• Read the manuals provided with the

devices. Depending on the devices, the

connection method may differ from the

figure. In addition, the device settings

may be changed depending on the

connection method to secure proper

operation.

• Turn off all the devices including the TV.

• The “Specifications” on page 48 contains

the details of the EXT terminals. If you

are connecting a device not listed in the

following connection diagram, see the

table to choose the best EXT terminal.

• Note that connecting cables are not

supplied.

= SCART cable

~ Audio cable

! Video cable

@ S-VIDEO cable

# Component cable

HV-36P38SUE

Front of the TV

EXT-5

Back of the TV

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

Additional preparation

HV-32P37SUE/HV-28P37SUE

Back of the TV

EXT-

EXT-1

EXT

-2

EXT-3

Back of the TV

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

Additional preparation

„ Devices which can output the S-

VIDEO signal (Y/C signal) such as

a S-VHS VCR

„ TV output from the EXT-1 terminal

The output of video/sound signal of a TV

channel you are currently viewing is always

output from the EXT-1 terminal.

Connect the device to an EXT terminal other

than the EXT-1 terminal.

You can choose a video input signal from the

S-VIDEO signal (Y/C signal) and regular

video signal (composite signal). For details

of how to operate the device, see “S-IN (S-

VIDEO input)” on page 37.

• Changing over a Programme number (PR)

also changes over the TV output from the

EXT-1 terminal.

• The video/sound signal from an EXT

terminal cannot be output.

• Teletext programmes cannot be output.

„ T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible

VCR to the EXT-2 terminal. If not, the T-V

LINK function will not work properly.

„ Connecting Speakers/Amplifier

While referring to the Audio equipment

connection diagram, connect the audio

equipment you desire to the TV.

• When connecting a T-V LINK compatible

VCR to the EXT-2 terminal, be sure to

connect the Decoder to the VCR. If not,

the T-V LINK function may not work

properly. After you have registered TV

channels to the Programme numbers (PR),

set the DECODER (EXT-2) function for

the Programme number (PR) to ON in

order to unscramble a scrambled TV

channel. For details of operation, see

“DECODER (EXT-2)” on page 36.

You can use external front speakers to listen

to the TV sound instead of the TV speakers.

Before connecting anything:

• Read the manuals provided with the

amplifier and speakers.

• Turn the TV and Amplifier off.

• To prevent magnetism from the speakers

adversely effecting the TV screen, use

magnetic-shielded speakers for the front

speakers.

• Note that connecting cables are not

supplied.

„ Connecting headphones

Connect the headphones with a stereo mini-

jack (of 3.5 mm in diameter) to the

headphone jack at the TV rear panel.

• No sound comes out from the TV

speakers when the headphones are

connected and only one screen is

displayed.

Back of the TV

Amplifier

Front speakers (Magnetic-shielded type)

„ Video/sound signal output from

the EXT-2 terminal

You can arbitrarily change over the output of

the video/sound signal from the EXT-2

terminal. It is useful when you want to dub

the video/sound from another device on the

VCR connected to the EXT-2 terminal. For

details on how to do this operation, see

“DUBBING” on page 39.

• The output from the AUDIO OUT

terminal is not interrupted by headphone

connection to the TV. You cannot cut the

sound from the front speaker even if you

connect a headphone to the TV.

• Adjust the volume of the external

speakers with the amplifier.

CH/CC numbers

When you want to use the INSERT function on page 35, find the CH/CC number corresponding to

the Channel number of the TV channel from this table.

Channel

CH 02 / CH 202 E2, R1

CH 40 / CH 240 E40, R40

CH 41 / CH 241 E41, R41

CH 42 / CH 242 E42, R42

CH 43 / CH 243 E43, R43

CH 44 / CH 244 E44, R44

CH 45 / CH 245 E45, R45

CH 46 / CH 246 E46, R46

CH 47 / CH 247 E47, R47

CH 48 / CH 248 E48, R48

CH 49 / CH 249 E49, R49

CH 50 / CH 250 E50, R50

CH 51 / CH 251 E51, R51

CH 52 / CH 252 E52, R52

CH 53 / CH 253 E53, R53

CH 54 / CH 254 E54, R54

CH 55 / CH 255 E55, R55

CH 56 / CH 256 E56, R56

CH 57 / CH 257 E57, R57

CH 58 / CH 258 E58, R58

CH 59 / CH 259 E59, R59

CH 60 / CH 260 E60, R60

CH 61 / CH 261 E61, R61

CH 62 / CH 262 E62, R62

CH 63 / CH 263 E63, R63

CH 64 / CH 264 E64, R64

CH 65 / CH 265 E65, R65

CH 66 / CH 266 E66, R66

CH 67 / CH 267 E67, R67

CH 68 / CH 268 E68, R68

CH 69 / CH 269 E69, R69

CC 01 / CC 201 S1

CC 02 / CC 202 S2

CC 03 / CC 203 S3

CC 04 / CC 204 S4

CC 05 / CC 205 S5

CC 06 / CC 206 S6

CC 07 / CC 207 S7

CC 08 / CC 208 S8

CC 09 / CC 209 S9

CC 10 / CC 210 S10

CC 11 / CC 211 S11

CC 12 / CC 212 S12

CC 13 / CC 213 S13

CC 14 / CC 214 S14

CC 15 / CC 215 S15

CC 16 / CC 216 S16

CC 17 / CC 217 S17

CC 18 / CC 218 S18

CC 19 / CC 219 S19

CC 20 / CC 220 S20

CC 21 / CC 221 S21

CC 22 / CC 222 S22

CC 23 / CC 223 S23

CC 24 / CC 224 S24

CC 25 / CC 225 S25

CC 26 / CC 226 S26

CC 27 / CC 227 S27

CC 28 / CC 228 S28

CC 29 / CC 229 S29

CC 30 / CC 230 S30

CC 31 / CC 231 S31

CC 32 / CC 232 S32

CC 33 / CC 233 S33

CC 34 / CC 234 S34

CC 35 / CC 235 S35

CC 36 / CC 236 S36

CC 37 / CC 237 S37

CC 38 / CC 238 S38

CC 39 / CC 239 S39

CC 40 / CC 240 S40

CC 41 / CC 241 S41

CH 03 / CH 203 E3, ITALY A

CH 04 / CH 204 E4, ITALY B, R2

CH 05 / CH 205 E5, ITALY D, R6

CH 06 / CH 206 E6, ITALY E, R7

CH 07 / CH 207 E7, ITALY F, R8

CH 08 / CH 208 E8, R9

CH 09 / CH 209 E9, ITALY G

CH 10 / CH 210 E10, ITALY H, R10

CH 11 / CH 211 E11, ITALY H+1, R11

CH 12 / CH 212 E12, ITALY H+2, R12

CH 21 / CH 221 E21, R21

CH 22 / CH 222 E22, R22

CH 23 / CH 223 E23, R23

CH 24 / CH 224 E24, R24

CH 25 / CH 225 E25, R25

CH 26 / CH 226 E26, R26

CH 27 / CH 227 E27, R27

CH 28 / CH 228 E28, R28

CH 29 / CH 229 E29, R29

CH 30 / CH 230 E30, R30

CH 31 / CH 231 E31, R31

CH 32 / CH 232 E32, R32

CH 33 / CH 233 E33, R33

CH 34 / CH 234 E34, R34

CH 35 / CH 235 E35, R35

CH 36 / CH 236 E36, R36

CH 37 / CH 237 E37, R37

CH 38 / CH 238 E38, R38

CH 39 / CH 239 E39, R39

CC 75 / CC 275

CC 76 / CC 276 Y, R3

CC 77 / CC 277 Z, ITALY C, R4

CC 78 / CC 278 Z+1, R5

CC 79 / CC 279 Z+2

Channel

F41

F42

F43

F44

F45

F46

F47

F48

F49

F50

F51

F52

F53

F54

F55

F56

F57

F58

F59

F60

F61

F62

F63

F64

F65

F66

F67

F68

F69

Frequency (MHz)

391 - 399

399 - 407

407 - 415

415 - 423

423 - 431

431 - 439

439 - 447

447 - 455

455 - 463

463 - 469

CH 102

CH 103

CH 104

CH 105

CH 106

CH 107

CH 108

CH 109

CH 110

CH 121

CH 122

CH 123

CH 124

CH 125

CH 126

CH 127

CH 128

CH 129

CH 130

CH 131

CH 132

CH 133

CH 134

CH 135

CH 136

CH 137

CH 138

CH 139

CH 140

CH 141

CH 142

CH 143

CH 144

CH 145

CH 146

CH 147

CH 148

CH 149

CH 150

CH 151

CH 152

CH 153

CH 154

CH 155

CH 156

CH 157

CH 158

CH 159

CH 160

CH 161

CH 162

CH 163

CH 164

CH 165

CH 166

CH 167

CH 168

CH 169

CC 110

CC 111

CC 112

CC 113

CC 114

CC 115

CC 116

CC 123

CC 124

CC 125

CC 126

CC 127

CC 128

CC 129

CC 130

CC 131

CC 132

CC 133

CC 141

CC 142

CC 143

CC 144

CC 145

CC 146

CC 147

CC 148

CC 149

CC 150

CC 151

116 - 124

124 - 132

132 - 140

140 - 148

148 - 156

156 - 164

164 - 172

220 - 228

228 - 236

236 - 244

244 - 252

252 - 260

260 - 268

268 - 276

276 - 284

284 - 292

292 - 300

300 - 306

306 - 311

311 - 319

319 - 327

327 - 335

335 - 343

343 - 351

351 - 359

359 - 367

367 - 375

375 - 383

383 - 391

CC 152

CC 153

CC 154

CC 155

CC 156

CC 157

CC 158

CC 159

CC 160

CC 161

F10

F21

F22

F23

F24

F25

F26

F27

F28

F29

F30

F31

F32

F33

F34

F35

F36

F37

F38

F39

F40

CH/CC numbers

• When two CH/CC numbers correspond to one Channel number, choose either one according to

the current COUNTRY setting. When the COUNTRY setting is other than FRANCE, choose a

two-digit CH/CC number. When the COUNTRY setting is FRANCE, choose a three-digit CH/

CC number.

• Find the CH/CC number (CC110 to CC161) corresponding to the TV channel (SECAM-L

system) from a French cable TV station, based on the broadcast frequency of the TV channel.

When you do not know the broadcast frequency, please contact the cable TV station.

• The CH/CC numbers of CH102-CH169 and CC110-CC161 correspond to the TV channels

being broadcast by a SECAM-L system. The other CH/CC numbers correspond to the TV

channels being broadcast by a method other than a SECAM-L system.

Troubleshooting

If a problem arises while you are using the TV, please read this “Troubleshooting” well before

you request having the TV repaired. You may be able to fix it easily by yourself. For example, if

the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think

there is a problem with the TV itself.

Important:

• This Troubleshooting guide only covers problems whose cause are not easy to determine. If a

question arise when you are operating a function, read the page(s) corresponding to the

operation of the function well, not this Troubleshooting guide.

• After you have followed the Troubleshooting description or the operating description of the

functions concerned without any success, remove the AC plug from the AC outlet and request

a repair of your TV. Do not attempt to repair the TV by yourself or remove the rear cover of

the TV.

„ If you cannot turn on the TV

„ Poor picture

• Is the AC plug connected to the AC

outlet?

• Is the Power lamp lit? If not, press the

Main power button.

• Make sure to set the VCR/TV/DVD

switch to the TV position. You cannot

turn the TV on when the VCR/TV/DVD

switch is set to the VCR or DVD position.

• If noise totally obscures the picture

(snow), the aerial or aerial cable may have

trouble. Check the following to try to

solve the trouble:

Has the TV and aerial been connected

properly?

Has the aerial cable been damaged?

Is the aerial pointed to the right

direction?

„ If you cannot turn off the TV

Is the aerial itself faulty?

• Make sure to set the VCR/TV/DVD

switch to the TV position. You cannot

turn the TV off when the VCR/TV/DVD

switch is set to the VCR or DVD position.

• If the TV or aerial receives interference

from the other devices, stripes or noise

may appear in the picture. Move such

devices as an amplifier, personal

computer, or a hair drier that can cause

interference away from your TV, or try

changing its location. If the aerial suffers

interference from a radio tower or high-

voltage wire, please contact your local

dealer.

• If the TV receives interference from

signal reflecting from mountains or

building, double-pictures (ghosting) will

occur. Try to change the aerial’s direction

or replace the antenna with the one with

better directionality.

„ No picture/No sound

• Have you chosen a TV channel whose

reception is extremely bad? In this case,

the BLUE BACK function will be

activated, the entire screen becomes blue,

and the sound is muted. In spite of this, if

you want to view the TV channel, follow

the description “BLUE BACK” on

page 31 to try to change the BLUE BACK

function setting to OFF.

• If the SYSTEM setting for a TV channel

is incorrect, it may prevent the sound

from being issued. Follow the description

“EDIT/MANUAL” on page 32 to use the

MANUAL function to try to change the

SYSTEM setting.

• Are your COLOUR SYSTEM settings for

the TV channels correct? Follow the

description “COLOUR SYSTEM” on

page 26 to try to solve the trouble.

Troubleshooting

• Has COLOUR or BRIGHT been

controlled properly? Follow the

• Have you attempted to use the remote

control at the sides or rear of the TV or at

a location more than seven meters apart

from the TV location? Operate the remote

control in the front of your TV or a

location less than seven meters from your

TV to try to solve the problem.

• When you are viewing a teletext

programme, you cannot operate the

menus. Press the b button to return the

teletext programme to the ordinary TV

programme to try operating the menus.

• If the TV operation becomes disabled

suddenly, press the Main power button on

the TV and turn off the main power. Try

to press the Main power button again to

turn on the main power. If the TV returns

to a normal state, it is not a failure.

description “BRIGHT” or “COLOUR” on

page 24 to try to adjust them properly.

• Videotaping teletext is not recommended

because it may not record correctly.

• When a white and bright still image (such

as a white dress) is displayed on the

screen, the white part may look as if it

were coloured. It is a phenomenon

unavoidable due to the nature of the

picture tube itself, and not due to a TV

failure. When the picture disappears from

the screen, the unnatural colours will also

disappear.

• When viewing images from commercially

available video software products, or

videos from videotapes which have been

recorded improperly, the top of the image

may be distorted. This is due to the

condition of the video signal, and not

because of malfunction.

„ Other concerns

• When the SLEEP TIMER function

operates, the TV is automatically turned

off. If the TV is turned off suddenly, try to

press the # (Standby) button to turn on

the TV once again. At this time, if the TV

resumes a normal state, there is no

problem.

• When a WSS signal is included in the

broadcast signal or the signal from an

external device, or when the TV is

receiving a control signal from an external

device, the ZOOM mode will change

automatically. When you want to return to

the previous ZOOM mode, press the

c button to choose the ZOOM

mode again.

• Since this TV is designed to make full use

of the resolution of the original video

source, the motion may appear unnatural

when the video source is input with 625p

progressive-scanning component signals.

If this occurs, change the output setting of

the connected device to 625i interlace-

scanning component signal output.

„ Poor sound

• Have you adjusted BASS or TREBLE

properly? If not, follow the description

“BASS” or “TREBLE” on page 28 to try

to adjust them properly.

• If you bring a magnetised device such as a

speaker near to your TV, a picture may be

warped or unnatural colours appear at the

corners of the screen. In this case, keep

the device apart from your TV. If the

speakers causes such phenomena, use the

magnetic-shielded speakers instead.

• A picture may be tilted due to the

influence of the earth’s magnetism. In this

case, use the “PICTURE TILT” on

page 36 to complete the tilt.

• When the TV channel reception is poor, it

can be hard to hear the stereo or bilingual

sound. In this case, follow the description

“STEREO / I • II” on page 28 to hear the

sound more easily by changing it to a

mono sound.

„ Operation disabled

• Have the batteries of the remote control

become exhausted? Follow the

description “Putting the batteries into the

Remote control” on page 6 and replace

them with new batteries to try to solve the

problem.

Troubleshooting

• It takes a short period of time from the

time an operation such as changing

channels is performed until an image is

displayed. This is not a malfunction. This

is the time required for the image to

stabilize before it can be displayed.

• The TV may emit a crackling sound due

to a sudden change in temperature. It does

not matter if a picture or sound does not

show any abnormality. If you hear

crackling sounds frequently while you are

viewing the TV, other causes may be

assumed. For precautionary purposes,

request your service technician to inspect

it.

• Touching the screen may cause you feel a

slight electric shock due to its static

electricity. It is an unavoidable

phenomenon due to the construction of

the picture tube. It is not a problem with

the TV. You can rest assured that this

static discharge does not have harmful

influence over the human body.

• When set to 2-pictures multi, adjust the

headphone sound with HEADPHONE

VOLUME in the SOUND menu.

Specifications

Model

Item

HV-36P38SUE

Broadcasting systems

Colour systems

CCIR B/G, I, D/K, L

PAL, SECAM

• The EXT terminals also support the NTSC 3.58/4.43 MHz system.

Channels and frequencies

• E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY

H+2, F2-F10, F21-F69, R1-R12, R21-R69

• French cable TV channel of broadcast frequencies 116 - 172 MHz and 220 -

469 MHz

Sound-multiplex systems

Teletext systems

Power requirements

Power consumption

Picture tube size

Audio output

A2 (B/G, D/K), NICAM (B/G, I, D/K, L) system

FLOF (Fastext), TOP, WST (World Standard System)

220 - 240 V AC, 50 Hz

141 W, Standby: 2.0 W

Viewable area 86 cm (measured diagonally)

Rated Power output: TV: 10 W + 10 W, Woofer: 18 W

TV: 2 cm round × 2, (3 cm × 10 cm) oval × 4, Woofer: 16 cm round × 1

Speakers

EXT-1 terminal

Euroconnector (21-pin, SCART)

• Video input, Audio L/R inputs and RGB inputs are available.

• TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal

Euroconnector (21-pin, SCART)

• Video input, S-VIDEO (Y/C) input, Audio L/R inputs and RGB inputs are

available.

• Video and Audio L/R outputs are available.

• T-V LINK functions are available.

EXT-3 terminal

EXT-4 terminal

Euroconnector (21-pin, SCART)

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

RCA connectors × 5

• Component video (Pr, Pb, Y) inputs (625p, 525p, 1125i) and Audio L/R inputs

are available.

EXT-5 terminal

RCA connectors × 3

S-VIDEO connector × 1

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

AUDIO OUT terminal

RCA connectors × 2

• Audio L/R outputs are available.

• Output level 0.5 Vrms.

Headphone jack

Dimensions (W × H × D)

Weight

Stereo mini-jack (3.5 mm in diameter)

TV: 912 mm × 624 mm × 593 mm, Woofer: 435 mm × 230 mm × 120 mm

TV: 70 kg, Woofer: 4 kg

Accessories

Remote control unit × 1 (RM-C1800), Woofer × 1

AA/R6 dry cell battery × 2

Design and specifications subject to change without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any

commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the

owners of copyright of the original picture sources, as this constitutes an infringement of copyright.

Specifications

Model

HV-32P37SUE

CCIR B/G, I, D/K, L

PAL, SECAM

HV-28P37SUE

Item

Broadcasting systems

Colour systems

• The EXT terminals also support the NTSC 3.58/4.43 MHz system.

Channels and frequencies

• E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY

H+2, F2-F10, F21-F69, R1-R12, R21-R69

• French cable TV channel of broadcast frequencies 116 - 172 MHz and 220 -

469 MHz

Sound-multiplex systems

Teletext systems

Power requirements

Power consumption

Picture tube size

A2 (B/G, D/K), NICAM (B/G, I, D/K, L) system

FLOF (Fastext), TOP, WST (World Standard System)

220 - 240 V AC, 50 Hz

137 W, Standby: 2.0 W

127 W, Standby: 2.0 W

Viewable area 76 cm

(measured diagonally)

Viewable area 66 cm

(measured diagonally)

Audio output

Speakers

Rated Power output: 10 W + 10 W

(13 cm × 6.5 cm) oval × 2

EXT-1 terminal

Euroconnector (21-pin, SCART)

• Video input, Audio L/R inputs and RGB inputs are available.

• TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal

Euroconnector (21-pin, SCART)

• Video input, S-VIDEO (Y/C) input, Audio L/R inputs and RGB inputs are

available.

• Video and Audio L/R outputs are available.

• T-V LINK functions are available.

EXT-3 terminal

EXT-4 terminal

Euroconnector (21-pin, SCART)

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

RCA connectors × 5

• Component video (Pr, Pb, Y) inputs (625p, 525p, 1125i) and Audio L/R inputs

are available.

EXT-5 terminal

RCA connectors × 3

S-VIDEO connector × 1

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

AUDIO OUT terminal

RCA connectors × 2

• Audio L/R outputs are available.

• Output level 0.5 Vrms.

Headphone jack

Dimensions (W × H × D)

Weight

Stereo mini-jack (3.5 mm in diameter)

948 mm × 562 mm × 550 mm

54.0 kg

854 mm × 508 mm × 493 mm

38.0 kg

Accessories

Remote control unit × 1 (RM-C1800)

AA/R6 dry cell battery × 2

Design and specifications subject to change without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any

commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the

owners of copyright of the original picture sources, as this constitutes an infringement of copyright.

LCT1537-001A-U

0903-T-CR-JMUK

HV-36P38SJE

HV-32P37SJE

HV-28P37SJE

COLOUR TELEVISION

INSTRUCTIONS

„

Warning

DO NOT cut off the mains plug from this

equipment. If the plug fitted is not suitable

for the power points in your home or the cable

is too short to reach a power point, then obtain

an appropriate safety approved extension lead

or adaptor or consult your dealer.

As these colours may not correspond with the

coloured marking identifying the terminals in

your plug proceed as follows:

The wire which is coloured blue must be

connected to the terminal which is marked

with the letter N or coloured black.

If nonetheless the mains plug is cut off,

remove the fuse and dispose of the plug

immediately, to avoid a possible shock

hazard by inadvertent connection to the

mains supply.

If a new mains plug has to be fitted, then

follow the instruction given below:

The wire which is coloured brown must be

connected to the terminal which is marked

with the letter L or coloured red.

When replacing the fuse, use only a correctly

rated approved type and always re-fit the fuse

cover.

„ If in doubt — consult a competent

Important

Do not make any connection to the larger

terminal which is marked with the letter E or

electrician.

How to replace the fuse

Open the fuse

compartment with a

blade screwdriver, and

by the safety earth symbol

green or green-and-yellow.

or coloured

The wires in the mains lead on this product

are coloured in accordance with the

following code:

replace the fuse.

Fuse

Blue: Neutral

Brown: Live

„

Guidelines for safe operation

This equipment has been designed and manufactured to comply with international safety

standards. However, as with any electrical appliance, care must be taken to ensure optimal results

and operational safety.

• Before attempting to use this equipment, read the operating instructions thoroughly.

• Ensure that all electrical connections (including the mains plug, extension leads, etc.) have

been made in accordance with the manufacturer’s instructions.

• If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.

• Handle all glass panels or covers with care.

• Never operate this equipment if it appears damaged or operates abnormally. Turn the power

off, disconnect the main power plug and consult your dealer.

• Never remove any affixed panels or covers. Doing so may result in electrical shock.

• Never leave this equipment operating unattended unless otherwise specifically stated that it is

designed to do so or in standby mode. Only use the designated power switch to turn off the

power and ensure that all potential users are instructed how to do so. Make special

arrangements for infirm or handicapped persons.

• Never watch TV while operating a motor vehicle. It is illegal to watch TV while driving.

• Never listen to headphones at high volume. Doing so may damage your hearing.

• Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in

a malfunction or damage.

• Never use makeshift stands or attempt to affix legs with wood screws. When using a

manufacturer’s approved stand or legs, use only the fixtures provided and follow the

installation instructions.

• Never allow this equipment to be exposed to rain or moisture.

• Never allow anyone, especially children, to insert anything into an opening in the case. Doing

so may result in a fatal electrical shock.

• Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you

begin.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

• Operate only from the power source specified

(AC 220 – 240 V, 50 Hz) on the unit.

• Avoid damaging the AC plug and power cord.

• When you are not using this unit for a long

period of time, it is recommended that you

disconnect the power cord from the main

outlet.

• The main power button on the TV does not

fully isolate the TV from the mains supply. If

you are not going to use this TV for a long

period of time, be sure to disconnect the mains

plug from the mains outlet.

Avoid improper installation and never put the unit where good

ventilation is not possible.

When installing this TV, distance recommendations must be

maintained between the set and the wall, as well as inside a tightly

enclosed area or piece of furniture.

Adhere to the minimum distance guidelines shown for safe operation.

Failure to heed the following precautions may result in damage to the TV or

remote control.

DO NOT block the TV’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be

able to get out.)

DO NOT place anything on top of the TV.

(such as cosmetics or medicines, flower vases, potted plants, cups, etc.)

DO NOT allow objects or liquid into the cabinet openings.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

DO NOT place any naked flame sources, such as lighted candles, on the TV.

The surface of the TV screen is easily damaged. Be very careful with it when handling the TV.

Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully.

Never use any cleaner or detergent on it.

In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it

yourself or remove the rear cover.

D.I.S.T. demonstration

To start the D.I.S.T. demonstration:

Press the H button to display the menu bar. Then press the yellow button.

A picture split in two (D.I.S.T. turned on and D.I.S.T. turned off) will appear on the screen.

To quit the D.I.S.T. demonstration:

Press the yellow button, b button, p p buttons or any of the number buttons.

CONTENTS

Setting up your TV ...................................5

Connecting the aerial and video cassette

recorder (VCR)....................................... 5

Connecting and placing the woofer unit

(HV-36P38SJE only) .............................. 7

Connecting the power cord to the AC

outlet....................................................... 8

Putting the batteries into the remote

control..................................................... 8

Initial settings ............................................. 8

T-V LINK functions................................... 12

SOUND menu ......................................... 30

STEREO / I • II.........................................30

BASS........................................................ 30

TREBLE ................................................... 30

BALANCE ................................................ 30

HEADPHONE VOLUME .......................... 30

3D CINEMA SOUND................................ 30

FEATURES menu................................... 31

SLEEP TIMER .........................................31

CHILD LOCK............................................ 31

APPEARANCE.........................................32

BLUE BACK............................................. 32

TV buttons and functions......................13

Turn the main power on........................... 14

Turn the TV on from standby mode ......... 14

Choose a TV channel .............................. 14

Adjust the volume .................................... 14

SET UP menu ......................................... 33

AUTO PROGRAM.................................... 33

EDIT/MANUAL.........................................33

LANGUAGE ............................................. 38

PICTURE TILT.........................................38

DECODER (EXT-2).................................. 38

EXT SETTING.......................................... 39

Remote control buttons and

functions..............................................15

Turn the TV on or off from standby mode ... 15

Choose a TV channel and watch images

from external devices ........................... 16

Adjust the volume .................................... 17

Information function ................................. 17

ZOOM function......................................... 18

3D CINEMA SOUND function.................. 19

Return to TV channel instantly................. 19

Using the FREEZE function..................... 19

Using the MULTI-PICTURE function ....... 20

Operating a JVC brand VCR or DVD

Additional preparation .......................... 42

Connecting external equipment ............... 42

Troubleshooting .................................... 45

Specifications ........................................ 47

player.................................................... 21

Teletext function ....................................22

Basic operation ........................................ 22

Using the List Mode ................................. 22

Hold.......................................................... 23

Sub-page ................................................. 23

Reveal...................................................... 23

Size.......................................................... 23

Index........................................................ 23

Cancel...................................................... 24

Using the TV’s menu..............................25

Basic operation ........................................ 25

PICTURE menu.......................................26

PICTURE MODE ..................................... 26

CONTRAST ............................................. 26

BRIGHT ................................................... 26

SHARP..................................................... 26

COLOUR.................................................. 26

HUE ......................................................... 26

COLOUR TEMP....................................... 26

FEATURES.............................................. 27

Setting up your TV

Caution

• Turn off all the equipment including the TV before connecting anything.

Connecting the aerial and video cassette recorder (VCR)

• The connecting cables are not provided.

• For further details, refer to the manuals provided with the devices to be connected.

„ If you are connecting a VCR,

HV-36P38SJE

Back of the TV

Aerial

follow A → B → C in the diagram

opposite.

75-ohm

Coaxial

Cable

„ If you are not connecting a VCR,

follow 1.

EXT-

EXT-1

To use the T-V LINK functions, you must

have a T-V LINK compatible VCR

connected by a SCART cable C to the EXT-

2 terminal on the TV. For details about T-V

LINK functions, see “T-V LINK functions”

on page 12.

EXT-2

EXT-3

AUDIO OUT

21-pin

75-ohm

Coaxial

Cable

SCART

Cable

• You can watch a video using the VCR

without doing C. For details, see your

VCR instruction manual.

To Aerial

Input

VCR

• To connect more equipment, please see

“Connecting external equipment” on

page 42.

• To connect additional audio equipment,

see “Connecting speakers/amplifier” on

page 44.

• If you connect a decoder to a T-V LINK

compatible VCR, set the DECODER

(EXT-2) function to ON. For details, see

“DECODER (EXT-2)” on page 38.

Otherwise, you will not be able to watch

scrambled channels.

To Aerial

Output

AV IN/OUT

Terminal

HV-32P37SJE/HV-28P37SJE

Aerial

75-ohm

Coaxial

Cable

Back of the TV

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

21-pin

SCART

Cable

75-ohm

Coaxial

Cable

To Aerial

Input

VCR

To Aerial

Output

AV IN/OUT

Terminal

Setting up your TV

„ Rear Panel

HV-36P38SJE

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

1 Aerial socket (page 5)

2 Woofer terminal (pages 7)

3 EXT-1 terminal (pages 5, 39, 42)

4 EXT-2 terminal (pages 5, 12, 39, 42)

5 EXT-3 terminal (pages 39, 42)

6 EXT-4 terminal (pages 39, 42)

7 AUDIO OUT terminal (page 44)

HV-32P37SJE/HV-28P37SJE

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

1 Aerial socket (page 5)

2 EXT-1 terminal (pages 5, 39, 42)

3 EXT-2 terminal (pages 5, 12, 39, 42)

4 EXT-3 terminal (pages 39, 42)

5 EXT-4 terminal (pages 39, 42)

6 AUDIO OUT terminal (page 44)

Setting up your TV

Place the woofer unit within the range

of the connection cable.

It is recommended that the woofer unit be

placed with the speaker facing forwards.

Connecting and placing the

woofer unit (HV-36P38SJE

only)

Connect the supplied woofer connector to the

woofer terminal on the back of the TV.

If the woofer unit is not connected, you will

not be able to enjoy the bass sound.

• Connect so that the lever is raised.

Lever

_EXT-4

_T^-1

_T^-2

_T^-3

Pay attention to the following in order

to prevent unnatural colours from

appearing in the corner of the screen.

• Place the woofer unit at least 20 cm away

from either side of the TV.

• When disconnecting the woofer

connector, do so while pushing the lever.

• Do not place the woofer unit on top of the

TV.

• When the TV is used on a TV stand or

table, do not place the woofer unit

underneath the TV.

„ Placing the woofer unit

As shown in the diagram, fix the

supplied stoppers to the four corners

of the side of the woofer unit that will

be used as the base.

The woofer unit can be used either standing

up or lying down.

There is no difference between the top and

bottom of the woofer unit irrespective of

whether it is being used standing up or lying

down.

Setting up your TV

Connecting the power cord to

the AC outlet

Initial settings

When the TV is first turned on, it goes into

the initial settings mode, and you will see the

JVC logo. Follow the instructions on the

screen display to make the initial settings.

Caution

• Operate only from the power source specified

(AC 220 – 240 V, 50 Hz) on the unit.

Yellow button

Blue button

Putting the batteries into the

remote control

7 buttons

Use two AA/R6 dry cell batteries.

Insert the batteries from the - end, making

sure the + and - polarities are correct.

1 Press the main power button on the

The power lamp lights red (for power on),

then green (for TV on) and the JVC logo

appears.

HV-36P38SJE

• Follow the warnings printed on the

batteries.

• Battery life is about six months to one

year, depending on how much you use the

remote control.

Power lamp

Main power

button

HV-32P37SJE/HV-28P37SJE

• The batteries we supply are only for

setting up and testing your TV, please

replace them as soon as you need to.

• If the remote control does not work

properly, replace the batteries.

Power lamp

Main power

button

• If the power lamp stays red and does

not change to green:

Your TV is in the standby mode. To

turn the TV on, set the VCR/TV/DVD

switch on the remote control to the TV

position and press the # button. (See

page 15.)

Setting up your TV

• If the JVC logo does not appear this is

because your TV has already been

turned on for the first time:

use the “LANGUAGE” and “AUTO

PROGRAM” functions to make the

initial settings. For details, see “SET

UP menu” on page 33.

4 Press the 5 and 6 buttons to

choose the country where you are

• To receive SKY 1 you need a satellite

tuner. You must have the satellite tuner

set to SKY 1 before starting the AUTO

PROGRAM function which follows.

5 Press the blue button to start the

AUTO PROGRAM function

The AUTO PROGRAM menu appears

and received TV channels are

automatically stored in the programme

numbers (PR).

2 Press the a button

The LANGUAGE menu appears.

> LANGUAGE

>> AUTO PROGRAM

CH 28

14%

D0002(E)-EN

3 Press the 6 buttons to choose

ENGLISH. Then press the a

button

D0004-EN

• Perform the “ACI function” operation

(see page 10) when “ACI START/ACI

SKIP” is displayed.

• To cancel the AUTO PROGRAM

function:

The on-screen display will then be in

English.

The COUNTRY menu appears as a sub-

menu of the AUTO PROGRAM function.

There are two COUNTRY menus.

Pressing the yellow button changes the

COUNTRY menu as follows:

Press the b button.

After the TV channels have been

registered in the programme

numbers (PR), the EDIT menu

appears

> COUNTRY

> EDIT

START

BBC1

BBC2

ITV

CH4

CH5

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

> COUNTRY

MANUAL

MOVE

INSERT DELETE

D0038-EK

• If you want to, you can now edit the

programme numbers (PR) using the

EDIT/MANUAL function. For details,

see “EDIT/MANUAL” on page 33.

• If you do not want to edit programme

numbers (PR), go to the next step.

START

D0003-EN

Setting up your TV

• The AUTO PROGRAM function does not

set the programme number PR 0 (AV) for

your video cassette recorder. You will

need to set this using the MANUAL

function.

6 Press the a button to display the

T-V LINK menu

T-V LINK

DOWNLOAD TV

VCR

• In some areas you may get TV reception

from more than one transmitter, for

example different ITV regions. In this

case each TV channel could be set twice.

If this happens, the first set of channels

will have the stronger signal. If you want

to delete the second set of channels, you

will have to do it manually (see page 33).

EXIT

D0005-EN

If you do not have a T-V LINK

compatible VCR connected:

Press the b button to exit the T-V LINK

menu.

The T-V LINK menu disappears.

If you have a T-V LINK compatible

VCR connected to the EXT-2

terminal:

Follow the operating procedure

“Downloading the data to VCR” on

page 11 to transmit the Programme

number (PR) data.

Now, the initial settings are complete,

and you can watch the TV

• When the COUNTRY setting is

UNITED KINGDOM:

„ ACI function

This TV has an ACI function which decodes

the ACI (Automatic Channel Installation)

data.

BBC1, BBC2, ITV, Channel 4 and

Channel 5 are automatically set to the

programme numbers PR1 to PR5. If the

TV doesn't receive one of these TV

channels, that programme number (PR)

will not be set. Programme number PR6 is

not normally set.

Using the ACI function allows all TV

channels transmitted from the cable TV

station to be properly registered quickly

according to the data from the cable TV

station.

If “ACI START/ACI SKIP” appears in

the AUTO PROGRAM menu:

You can use the ACI (Automatic Channel

Installation) function to decode the ACI data

and complete the registration of all the TV

channels in a short period of time.

• When the COUNTRY setting is

IRELAND:

If your TV can detect the TV channel

name from the TV channel broadcast

signal, the TV channel name is assigned

to the programme number (PR) to which

the TV channel has been set. However,

which TV channels are set to which

programme numbers (PR) will depend on

the area in which you live.

• If a TV channel you want to view is not

set to a programme number (PR), you can

set it using the MANUAL function. For

details, see “EDIT/MANUAL” on

page 33.

Press the 6 buttons to choose ACI

START. Then press the a button to

start the ACI function

Depending on your cable TV station, there

may be a broadcast selection menu set up by

the cable TV station.

Follow the menu instructions and use the

5 and 6 buttons to operate the menu.

After you have made the setting, press the

a button.

Setting up your TV

• If you have any questions about the items

in the Broadcast Selection menu or how to

operate the menu, please contact your

cable TV station.

• If you don’t want to use the ACI function,

press the 6 buttons to choose ACI

SKIP and then press a.

1 Turn on the VCR

2 Press the a button

The data transmission begins.

DOWNLOAD TV

VCR

TRANSFER. . . . .

D0037-EN

• When the cable TV broadcast reception is

poor, the ACI function will not work

properly.

The T-V LINK menu disappears once the

data transmission ends.

• If there is an error in the ACI data itself,

the TV channel cannot be registered

properly. If this happens, turn the ACI

function off (ACI SKIP) and use the

AUTO PROGRAM function.

Alternatively, use the EDIT/MANUAL

function to correct the Programme

number (PR) setting.

When the T-V LINK menu is

changed over to another menu:

The TV has finished its menu. This new

menu is operated from the VCR. See the

VCR instruction manual for what to do

next.

If “FEATURE NOT AVAILABLE”

appears at the T-V LINK menu:

Check the following three items. Then

press the 2 button to retry data

transmission.

• Has a T-V LINK compatible VCR

been connected to the EXT-2

terminal?

• Has the VCR power been turned on?

• Does the SCART cable that is

connected to the EXT-2 terminal to T-

V LINK compatible VCR have all its

proper connections?

If “ACI ERROR” is displayed in the

AUTO PROGRAM menu:

“ACI ERROR” means that the ACI function

is not working properly. Press the 2 button

to start the ACI function again.

If “ACI ERROR” still appears even after you

have tried to start the ACI function several

times, press the 3 button to start the AUTO

PROGRAM function. It does not cause any

problem because all the TV channels are

registered to the Programme numbers (PR)

by the AUTO PROGRAM function.

„ Downloading the data to VCR

You can transmit to the latest Programme

numbers (PR) data to a VCR with the T-V

LINK function.

Caution

• This only works when a T-V LINK

compatible VCR is connected to the

EXT-2 terminal.

• This only works when the T-V LINK

menu is being displayed.

T-V LINK

DOWNLOAD TV

VCR

EXIT

D0005-EN

Setting up your TV

„ Direct Rec

T-V LINK functions

“What You See Is What You Record”

When you have a T-V LINK compatible

VCR connected to the EXT-2 Terminal on

the TV, it is easier to set up the VCR and to

view videos. T-V LINK uses the following

features:

You can easily record to VCR the images

that you are watching on the TV.

For details, read the manual for your VCR.

Use your VCR controls. “VCR IS

RECORDING” is displayed.

To use T-V LINK functions:

A “T-V LINK compatible VCR” means a

JVC video cassette recorder with the T-V

LINK logo, or with one of the following

logos. However, these VCRs may support

some or all of the features described earlier.

For details, see your VCR instruction

manual.

In the following situations, the VCR

will stop recording if the TV is turned

off, if the TV channel or input is

changed, or if the menu is displayed

on the TV:

• when recording images from an external

device connected to the TV (for example

a camcorder)

• when recording a TV channel after it has

been unscrambled on a decoder

• when recording a TV channel by using the

TV’s output because the VCR’s own

tuner cannot properly receive that

channel.

“Q-LINK” (a trademark of Panasonic

Corporation)

“Data Logic” (a trademark of Metz

Corporation)

“Easy Link” (a trademark of Phillips

Corporation)

“Megalogic” (a trademark of Grundig

Corporation)

“SMARTLINK” (a trademark of Sony

When the VCR is not ready (for example

when there is no tape inserted), “NO

RECORDING” is displayed.

You cannot carry out Direct Rec using your

TV’s control.

Corporation).

„ Pre-set download

The VCR will automatically download the

registered data on the TV channels from the

TV. This means you do not need to set up the

program channels on your VCR manually.

The preset download function automatically

begins when the initial setting is complete or

whenever you carry out the AUTO

Generally, the VCR cannot record a TV

channel that it cannot receive properly on its

own tuner, even if you can view that TV

channel on the TV. However, some VCRs

can record a TV channel by using the TV’s

output if that channel can be viewed on the

TV. For details, see your VCR instruction

manual.

PROGRAM or EDIT/MANUAL functions.

You can also carry out this function using

your VCR controls.

When “FEATURE NOT AVAILABLE” is

displayed:

If “FEATURE NOT AVAILABLE” is

displayed, the download was not performed

correctly. Before trying to download again,

check that:

• the VCR power is turned on

• the VCR is T-V LINK compatible

• the VCR is connected to the EXT-2

terminal

• the SCART cable is fully wired.

TV buttons and functions

HV-36P38SJE

HV-32P37SJE/HV-28P37SJE

EXT-

EXT-1

EXT

-2

EXT-3

EXT-5

See the pages in parentheses for details.

1 Remote control sensor

2 Power lamp (pages 8, 14)

3 Main power button (pages 8, 14)

4 Headphone jack (mini jack) (page 42)

5 P p buttons/ q buttons (page 14)

6 r (Volume) button (page 14)

7 EXT-5 terminal (pages 39, 42)

3 Main power button (pages 8, 14)

4 Headphone jack (mini jack) (page 42)

5 P p buttons/ q buttons (page 14)

6 r (Volume) button (page 14)

7 EXT-5 terminal (pages 39, 42)

TV buttons and functions

Turn the main power on

Press the main power button on the

TV.

The power lamp lights red and your TV is in

standby mode.

• If the power lamp lights green, the TV is

already on.

To turn the main power off:

Press the main power button again.

The power lamp goes off.

Caution

• The main power button on the TV does

not fully isolate the TV from the AC

supply. If you are not going to use the TV

for a long period, be sure to disconnect

the AC plug from the AC socket.

Turn the TV on from standby

mode

Press the P p buttons to turn the TV

on from standby mode

Choose a TV channel

Press the P p buttons to choose a

programme number (PR) or an EXT

terminal

Adjust the volume

1 Press the r (Volume) button

The volume level indicator appears.

2 Press the q buttons while the

volume level indicator is displayed

Remote control buttons and functions

1 Muting button

2 Number buttons

3 Information button

4 c button

5 3 sound button

6 b button

7 7 buttons

8 g (Text) button

9 p p buttons

0 VCR/DVD/Teletext control buttons

- p buttons

= # (Standby) button

~ VCR/TV/DVD switch

! G button

@ Colour button

# X (Multi) button

$ f/g (Freeze/Swap) button

% H button

^ a button

& b button

* r (Volume) q buttons

Turn the TV on or off from

standby mode

Press the # (standby) button to turn

the TV on or off.

When the TV is turned on, the power lamp

changes from red to green.

• The power can be turned on by pressing

the b button, p p buttons or Number

buttons.

To turn the TV on or off, set the VCR/TV/

DVD switch on the remote control to the

TV position and press the # button.

If the VCR/TV/DVD switch on the remote

control is set to a position other than TV,

the TV will not be turned on or off even if

the # button is pressed.

Remote control buttons and functions

• This TV set has a function which can

automatically change over the input

according to a special signal output

from an external device. (The EXT-4

and EXT-5 terminals do not support

this function.)

• Since this TV is designed to make full

use of the resolution of the original

video source, the motion may appear

unnatural when the video source is

input with 625p progressive-scanning

component signals.

If this happens, change the output

setting of the connected device to 625i

interlace-scanning component signal

output. See the instructions that came

with the device for more information.

Choose a TV channel and

watch images from external

devices

• If the picture is tilted, correct it. See

“PICTURE TILT” on page 38.

„ Use the number buttons:

Enter the programme number (PR)

of the channel using the number

buttons.

Example:

• PR 6 → press 6

• PR 12 → press 1 and 2

„ Use the p p buttons:

Press the p p buttons to

choose the programme number

(PR) you want or an EXT terminal.

To return to a TV channel:

Press the b button, the 6 buttons or the

number buttons.

„ Use the AV button:

Press the AV button to choose an

EXT terminal.

To use the programme number PR 0

(AV):

When the TV and VCR are connected only

by the aerial cable, choosing the programme

number PR 0 (AV) allows you to view

images from the VCR. Set the VCR RF

channel to the programme number PR 0

(AV) manually. For details, see “EDIT/

MANUAL” on page 33.

TV mode

EXT modes

Programme

numbers

PR 1 – PR 99

EXT-2

EXT-1

EXT-3

Pressing the G button changes the choice as

follows:

EXT-5

EXT-4

EXT modes

TV mode

EXT-2

EXT-1

Programme

PR 0

• You can choose a video input signal

from the S-VIDEO signal (Y/C signal)

and regular video signal (composite

signal). For details, see “S-IN (S-

VIDEO input)” on page 39.

• If you do not have a clear picture or no

colour appears, change the colour

system manually. See “COLOUR

SYSTEM” on page 28.

numbers

PR 1 – PR 99

EXT-3

or S3

EXT-5

EXT-4

• The VCR sends its playback image along

the aerial cable as an RF (radio frequency)

signal.

• If you choose an EXT terminal with no

input signal, the EXT terminal number

becomes fixed on the screen.

• Also see your VCR instruction manual.

Remote control buttons and functions

Time display:

The current time of the teletext data is

displayed.

Adjust the volume

Press the r q buttons to adjust

the volume.

The volume indicator appears and the

volume changes as you press the r q

buttons.

If the TV has not received a TV channel that

has teletext programmes since it was turned

on, the time display is blank. To view the

current time, choose a TV channel that has

teletext programmes. The time will continue

to be displayed until the TV is turned off

even if you choose other TV channels.

• An incorrect current time is sometimes

displayed when watching videos.

„ Muting the sound

Press the (muting) button to

turn off the sound.

Pressing the (muting) button again

PR LIST:

restores the previous volume level.

The programme number (PR) and EXT

terminal list is displayed.

Information function

Pressing the a button after choosing the

programme number (PR) or EXT terminal

with the 7 buttons will display the

chosen programme or EXT terminal.

• For programme numbers (PR) for which

the CHILD LOCK function is set, the n

(CHILD LOCK) mark is displayed. For

details see “CHILD LOCK” on page 31.

You can see the channel number of the

programme you are watching, the current

time or the PR LIST.

From the PR LIST, you can choose a channel

or EXT terminal.

Press the

(Information) button to

display the information you want to

see.

Pressing the

(Information) button changes

the display as follows:

PR LIST

Channel number display

12 : 00

BBC1

No indication

-10

+10

D0011-EN

Channel number display:

The channel number and channel name

(when the channel name is registered) of the

programme you are watching or the EXT

terminal number is displayed.

Remote control buttons and functions

16:9 ZOOM:

This zooms up the wide picture (16:9 aspect

ratio) to the full screen.

ZOOM function

You can change the screen size according to

the picture aspect ratio. Choose the optimum

one from the following ZOOM modes.

AUTO:

16:9 ZOOM SUBTITLE:

This zooms up the wide picture (16:9 aspect

ratio) with subtitles to the full screen.

When a WSS (Wide Screen Signalling)

signal, which shows the aspect ratio of the

picture, is included in the broadcast signal or

the signal from an external device, the TV

automatically changes the ZOOM mode to

16:9 ZOOM mode or FULL mode according

to the WSS signal.

If a WSS signal is not included, the picture is

displayed according to the ZOOM mode set

with the 4:3 AUTO ASPECT function.

• For details of the 4:3 AUTO ASPECT

function, see “4:3 AUTO ASPECT” on

page 29.

FULL:

This uniformly stretches the left and right

sides of a normal picture (4:3 aspect ratio) to

fill the wide TV screen.

• For 16:9 aspect ratio pictures that have

been squeezed into a normal picture (4:3

aspect ratio), use the FULL mode to

restore the picture to its original shape.

• When the AUTO (WSS) mode does not

function correctly due to poor WSS signal

quality or when you want to change the

ZOOM mode, press the c button

and change to another ZOOM mode.

„ Choose the ZOOM mode

REGULAR:

Use to view a normal picture (4:3 aspect

ratio) as this is its original shape.

1 Press the c button to display

the ZOOM menu

ZOOM

AUTO

REGULAR

PANORAMIC

14:9 ZOOM

16:9 ZOOM

16:9 ZOOM SUBTITLE

FULL

PANORAMIC:

This stretches the left and right sides of a

normal picture (4:3 aspect ratio) to fill the

screen, without making the picture appear

unnatural.

D0009-EN

2 Press the 6 buttons to choose a

ZOOM mode. Then press the a

button

• The top and bottom of the picture are

slightly cut off.

The picture expands and the chosen

ZOOM mode is displayed in about 5

seconds.

• The ZOOM mode may be

automatically changed by the control

signal from an external device. When

you want to return to the previous

ZOOM mode, choose the ZOOM

mode again.

14:9 ZOOM:

This zooms up the wide picture (14:9 aspect

ratio) to the upper and lower limits of the

screen.

Remote control buttons and functions

„ Adjusting the visible area of the

picture

3D CINEMA SOUND function

If subtitles or the top (or bottom) of the

picture are cut off, you can adjust the visible

area of the picture manually.

You can enjoy sounds with a wider

ambience.

• This function does not work for the sound

from headphones.

1 Press the c button

The ZOOM menu appears.

Press the 3 button and choose

“ON”, “MONO” or “OFF”.

2 Press the a button to display the

ZOOM mode indicator

ON:

Choose to add the 3D CINEMA SOUND

effect to stereo sound.

The indicator appears.

16 : 9 ZOOM

MONO:

D0010-EN

Choose to add the 3D CINEMA SOUND

effect to mono sound.

3 While it is displayed, press the 6

buttons to change the position of

the picture

OFF:

Choose to cancel the 3D CINEMA SOUND

effect.

• The 3D CINEMA SOUND effect can be

adjusted with the “3D CINEMA

SOUND” menu (see page 30).

• You cannot adjust the visible area in

REGULAR or FULL mode.

Return to TV channel instantly

You can return to a TV channel instantly.

Press the b button

The TV returns to the TV mode and a TV

channel appears.

Using the FREEZE function

You can view the current programme as a

still picture.

1 Press the f button

The still picture of the current picture will

appear.

current

programme

still picture

D0056-EN

Remote control buttons and functions

To cancel the FREEZE function:

Press the f button, the p p buttons or

the number buttons.

• When set to 2-pictures multi, you can

view a TV picture and a picture from

an external device. You can not view a

TV picture on more than one screen at

the same time.

• When 12-pictures multi is set, pictures

from external devices are not

displayed.

• The FREEZE function does not work

while a sub-picture is displayed.

• The still picture cannot be output from

the TV.

• The FREEZE function does not work

for pictures of 625p, 525p and 1125i

signals.

• When set to 2-pictures multi, the main-

picture can be changed by pressing the

p p buttons. The sub-picture screen

can be changed by pressing the p

buttons.

When set to 12-pictures multi and

there are more than 12 pictures, the

next or previous 12 screens can be

displayed by pressing the p buttons.

Using the MULTI-PICTURE

function

1 Press the X button

The MULTI-PICTURE menu appears.

Changing the sub-picture

Displaying the next or

previous 12 screens

D0101-EN

2 Press the 5 buttons to choose

the number of screens and then

press the a button

• When set to 2-pictures multi, press the

g (swap) button to switch the main-

picture and sub-picture.

Choose to return to one screen.

•

2-pictures multi function does not

work for a picture of 1125i signal.

D0102

• A picture of 625p or 525p signal

cannot be displayed as the sub-picture.

Pay attention to the following.

Choose to change to 2-pictures multi.

D0103

- When the EXT-4 picture is a picture

of 625p or 525p signal, you cannot

choose EXT-4 with the p buttons.

- When the EXT-4 picture signal is

changed to 625p, 525p or 1125i

Choose to change to 12-pictures multi.

D0104

2-pictures multi:

signal while the EXT-4 picture is

displayed as the sub-picture, the 2-

pictures multi function is cancelled.

Main-

picture

Sub-

picture

D0056-EN

12-pictures multi:

Still

pictures

Moving

picture

D0058-EN

Remote control buttons and functions

- The pictures cannot be swapped

when a picture of 625p or 525p

signal from EXT-4 is being

Operating a JVC brand VCR or

DVD player

displayed as the main picture.

These buttons will operate a JVC brand VCR

or DVD player. Pressing a button that looks

the same as the device’s original remote

control button has the same effect as the

original remote control.

• Do not press the g (swap) button

while you are recording the TV output

on the VCR. If you do, the TV output

signal will change.

• You cannot view a scrambled channel

in the sub-picture. If the g (swap)

button is pressed when viewing a

scrambled channel in the main-picture

using an external decoder, the channel

you have been viewing in the sub-

picture will appear in both the main-

picture and sub-picture.

• When set to 2-pictures multi and the

headphones are connected, the sound

for the main-picture is output from the

TV speakers and the sound from the

sub-picture is output from the

1 Set the VCR/TV/DVD Switch to the

VCR or DVD position

VCR:

When you are operating the VCR, set the

switch to the VCR position.

• You can turn the VCR on or off with

the # (standby) button.

DVD:

When you are operating the DVD player,

set the switch to the DVD position.

• You can turn the DVD player on or off

with the # (standby) button.

headphones.

- Adjust the volume of the sub-picture

sound from the headphones with

“HEADPHONE VOLUME” in the

“SOUND” menu (see page 30).

- The main-picture sound can not be

heard through the headphones.

• When set to 12-pictures multi, press

the 7 buttons to choose the

screen you want to view and the press

the a button to display that picture

on the whole screen.

• The BLUE BACK function does not

work when the MULTI-PICTURE

function is being used.

• The ZOOM function does not work

when the MULTI-PICTURE function

is being used.

2 Press the VCR/DVD Control Button

to control your VCR or DVD player

• If your device is not made by JVC,

these buttons will not work.

• Even if your device is made by JVC,

some of these buttons may not work,

depending on the device you are using.

• You can use the p buttons to choose

a TV channel the VCR will receive, or

choose the chapter the DVD player

plays back.

• Some models of DVD player use the

p buttons for both operating the fast

forward/backward functions and for

choosing the chapter. In this case, the

253 buttons do not work.

To return the multi-picture to one

screen:

Press the M button, press the 5

buttons to choose one screen, and then

press the a button.

You cannot turn the TV on or off when the

VCR/TV/DVD switch is set to the VCR or

DVD position.

When you turn the TV on or off, set the

VCR/TV/DVD switch to the TV position.

• Pressing the b button will also return

the display to one screen.

Teletext function

4 Choose a teletext page by pressing

the p p buttons, number buttons

or colour buttons

VCR/TV/

DVD

To return to the TV mode:

Press the b button or g (Text) button.

• If you have trouble receiving teletext

broadcasts, consult your local dealer or

the teletext station.

• The ZOOM function will not work in

the TV and text mode or Text mode.

• You cannot operate menus when

viewing a teletext programme.

• Language display depends on the

country which was set on the

COUNTRY menu. If characters on a

Teletext programme do not appear

properly, change the COUNTRY

setting to other country’s. To change

the COUNTRY setting, perform steps

1 and 2 of the “AUTO PROGRAM”

procedure on page 33 and then press

the a button.

Basic operation

You can view three types of teletext

broadcasts on the TV:

FLOF (Fastext), TOP and WST.

• TOP is not available when the

COUNTRY setting is UNITED

KINGDOM.

1 Choose a TV channel with a teletext

broadcast

2 Set the VCR/TV/DVD switch to the

TV position

Using the List Mode

You can store the numbers of your favourite

teletext pages in memory and call them up

quickly using the colour buttons.

3 Press g (Text) button to display

the teletext

„ To store the page numbers:

1 Press B button to go into the

List mode

Pressing g (Text) button changes the

mode as follows:

The page numbers you have stored are

displayed at the bottom of the screen.

2 Press a colour button to choose a

position. Then press the number

buttons to enter the page number

TV mode

TV and text mode

Text mode

Teletext function

3 Press and hold down the A (Store)

button

Reveal

Some teletext pages include hidden text

(such as answers to a quiz).

You can display the hidden text.

The four page numbers blink white to

show that they are stored in memory.

„ To call up a stored page:

Each time you press the E (Reveal)

button, text is hidden or revealed

1 Press the B button to enter the

List mode

2 Press a colour button having a

stored page

Size

To exit the List mode:

You can double the height of the teletext

display.

Press the B button again.

Hold

Press the F (Size) button

You can hold a teletext page on the screen for

as long as you want, even while several other

teletext pages are being received.

Press the C (Hold) button

Hold indication

Index

To cancel the Hold function:

Press C (Hold) button again.

You can return to the index page instantly.

Press the G (Index) button

Returns to page 100 or a previously specified

page.

Sub-page

Some teletext pages include sub-pages that

are automatically displayed.

1 Choose a teletext page that

includes sub-pages

Sub-page numbers that can be viewed are

automatically displayed at the top of the

screen.

2 Press the 5 buttons to choose a

sub-page number

Teletext function

Cancel

You can search for a teletext page while

watching TV.

1 Press the number button to enter a

page number, or press a colour

button

The TV searches for a teletext page.

2 Press H (Cancel) button

The TV programme appears. When the

TV finds the teletext page, its page

number appears in the upper left of the

screen.

3 Press H (Cancel) button to return

to a teletext page when the page

number is on the screen

• The TV mode cannot be resumed by

pressing the H (Cancel) button. To

return to the TV mode press b.

Using the TV’s menu

This TV has a number of functions you can

operate using menus. To use all your TV’s

functions, you need to understand the basic

menu operating techniques fully.

Types of menu

PICTURE menu

Choose to set the screen

settings.

D0106

D0107

D0108

Buttons used to operate the menus

SOUND menu

Choose to set the sound settings.

FEATURES menu

Choose to set the sleep timer

and child lock settings.

SET UP menu

Choose to edit the channels or

set the display language

settings.

D0109

The menu guide area can be made to appear

and disappear for some menus.

While the menu is displayed, press the h

button to change between the guide area

being displayed and not displayed.

Basic operation

1 Press the H button to display

the menu bar

>> 4:3 AUTO ASPECT

PICTURE

PANORAMIC

REGULAR

14:9 ZOOM

D0105-EN

2 Press the 5 buttons to choose

the menu you want to use and then

press the a button

D0017-EN

Guide area

PICTURE

D1105-EN

Chosen

menu name

>> 4:3 AUTO ASPECT

PANORAMIC

REGULAR

14:9 ZOOM

3 Press the 6 buttons to choose

the item to be set, press the 5

buttons to set the item, and then

press the a button

D1017-EN

• The guide area for some menus will still

be displayed even if the h button is

pressed. This is not a fault.

If there are sub-menus, use the 7

buttons to operate them.

• Press the b button to return to

the previous menu.

• Press the b or H button to exit

from the menu.

PICTURE menu

PICTURE

COLOUR

STANDARD

PICTURE MODE

CONTRAST

BRIGHT

SHARP

COLOUR

You can adjust the picture colour.

2 :lighter

HUE

COLOUR TEMP.

FEATURES

3 : deeper

COOL

RESET

HUE

D0014-EN

You can adjust the picture tint.

2 :reddish

3 : greenish

• While the PICTURE menu is displayed,

pressing the blue button will set the

CONTRAST, BRIGHT, SHARP,

COLOUR, HUE settings to their default

settings.

• You can change the HUE setting (picture

hue) when the colour system is NTSC

3.58, or NTSC 4.43.

COLOUR TEMP.

PICTURE MODE

You can select one of three COLOUR

TEMP. modes (three tones of white) to adjust

the white balance of the picture. Since white

is the colour which is used as a reference for

all the other colours, changing the COLOUR

TEMP. mode affects the appearance of all

the other colours on the screen.

You can choose one of three PICTURE

MODEs to adjust the picture settings

automatically.

BRIGHT:

Heightens contrast and sharpness.

COOL:

STANDARD:

A bluish white. Using this mode when

watching bright pictures allows you to enjoy

a more vivid and bright picture.

Standardizes picture adjustment.

SOFT:

Softens contrast and sharpness.

NORMAL:

The normal white colour.

CONTRAST

WARM:

You can adjust the picture contrast.

2 :lower

3 : higher

A reddish white. Using this mode when

watching films allows you to enjoy colours

that are characteristic of films.

BRIGHT

You can adjust the picture brightness.

2 :darker

3 : brighter

SHARP

You can adjust the picture sharpness.

2 :softer

3 : sharper

PICTURE menu

• The MAX setting is not suitable for high-

quality pictures which contain very little

noise.

FEATURES

Choose FEATURES and press the a or 3

button to display the sub-menu.

„ Super DigiPure

The Super DigiPure function uses the latest

in digital technology to give you a natural-

looking picture. The Super DigiPure function

includes the following two functions.

> FEATURES

DIGITAL VNR

Super DigiPure

MOVIE THEATRE

Colour DigiPure

COLOUR SYSTEM

4:3 AUTO ASPECT

AUTO(LOW)

AUTO

DigiPure function:

This function helps to create a natural-

looking picture by eliminating unnecessary

edges from high-contrast and crisp images.

For images with low-contrast, edges are

added to produce a sharper, more detailed

picture.

You can choose from the three DigiPure

function settings of AUTO, MIN and MAX.

• If you set the DigiPure effect too high on

a low-quality picture that contains a lot of

noise, this may actually make the noise

worse. We recommend you use the

AUTO setting if you can.

D1015-EN

„ DIGITAL VNR

The DIGITAL VNR function cuts down the

amount of ‘noise’ (‘snow’ or interference) in

the original picture.

You can choose from the three DIGITAL

VNR function settings of AUTO, MIN and

MAX.

AUTO(LOW)/AUTO(HIGH):

The TV will automatically adjust the level of

the DIGITAL VNR effect to match the

amount of noise in the picture, giving you the

best possible picture.

• If you set the DIGITAL VNR effect too

high it can make the picture less sharp. It is

recommended you use the AUTO(LOW)

setting if you can. If you set the DIGITAL

VNR function to AUTO(LOW) but still

notice some noise, change the setting from

AUTO(LOW) to AUTO(HIGH).

Picture motion compensation

function:

This function displays fast-moving pictures

(for example, the players or ball in a football

game) more smoothly and naturally on the

screen.

• The effect level of the picture motion

compensation function cannot be

changed. The effect level is the same no

matter which of the AUTO, MIN or MAX

settings is used.

MIN:

The level of the DIGITAL VNR effect is set

to the minimum. If you set the DIGITAL

VNR function to AUTO(LOW) but feel that

the sharpness of the original picture has not

been reproduced fully, change the setting

from AUTO(LOW) to MIN.

AUTO:

The TV will automatically adjust the level of

the DigiPure effect to match the amount of

noise in the picture, giving the best possible

picture.

• The MIN setting is not suitable for low-

quality pictures which contain a lot of

noise.

MAX:

The level of the DIGITAL VNR effect is set

to the maximum. If you set the DIGITAL

VNR function to AUTO(HIGH) but still

notice some noise, change the setting from

AUTO(HIGH) to MAX.

PICTURE menu

MIN:

OFF:

The level of DigiPure effect is set to the

minimum. When you set the Super DigiPure

function to AUTO and notice some noise,

change the setting from AUTO to MIN.

• The MIN setting is not suitable for high-

quality pictures which contain very little

noise.

Colour DigiPure doesn't work. This gives a

less clear picture than when this function is

turned on.

„ COLOUR SYSTEM

The colour system is chosen automatically.

However, if the picture is not clear or no

colour appears, choose the colour system

manually.

MAX:

The level of DigiPure effect is set to the

maximum. If you set the Super DigiPure

function to AUTO but feel that the original

picture quality has not been reproduced fully,

change the setting from AUTO to MAX.

• The MAX setting is not suitable for low-

quality pictures which contain a lot of

noise.

1 Choose COLOUR SYSTEM. Then

press the a or 3 button

The sub-menu of the COLOUR SYSTEM

function appears.

>> COLOUR SYSTEM

MAIN

SUB

PAL

AUTO

OFF:

The Super DigiPure function is turned off.

„ MOVIE THEATRE

The MOVIE THEATRE function displays a

cinema film picture more smoothly and

naturally on the screen.

D0016-EN

2 Press the 5 buttons to choose

AUTO:

MAIN or SUB

The television automatically recognizes the

type of signal and turns the function on and

off.

MAIN:

You can change the colour system of the

main-picture.

SUB:

You can change the colour system of the

sub-picture.

• Choose MAIN when a sub-picture is

not displayed.

ON:

This function is turned on.

OFF:

This function is turned off.

• The motion may appear unnatural when

viewing images with the NTSC colour

system. When the MOVIE THEATRE

function is set to AUTO or ON, the

motion may appear unnatural when

viewing images with the NTSC colour

system.

3 Press the 6 buttons to choose

the appropriate colour system.

Then press the a button

PAL:

PAL system

SECAM:

SECAM system

NTSC 3.58:

NTSC 3.58 MHz system

„ Colour DigiPure

Makes the colour outline stand out and

increases the sharpness giving a clearer

picture.

NTSC 4.43:

NTSC 4.43 MHz system

ON:

Colour DigiPure works. Normally use with

this function turned on.

PICTURE menu

AUTO:

This function detects a colour system

from the input signal. You can only use

this when you are viewing a picture from

programme number PR 0 (AV), or an

EXT terminal.

• The AUTO function may not function

properly if you have poor signal quality.

If the picture is abnormal in the AUTO

function, choose another colour system

manually.

• When in the Programme numbers PR 0

(AV) to PR 99, you cannot choose NTSC

3.58 or NTSC 4.43.

SECAM cannot be chosen when the

COUNTRY setting is UNITED

KINGDOM.

• “COLOUR SYSTEM” cannot be chosen

when you are watching the EXT-4

picture.

„ 4:3 AUTO ASPECT

You can choose one of three ZOOM modes,

REGULAR, PANORAMIC or 14:9 ZOOM,

as the ZOOM mode for the normal picture

(4:3 aspect ratio).

1 Choose 4:3 AUTO ASPECT then

press the a button

>> 4:3 AUTO ASPECT

PANORAMIC

REGULAR

14:9 ZOOM

D0017-EN

2 Press the 6 buttons to choose a

ZOOM mode

SOUND menu

SOUND

BALANCE

STEREO/

BASS

TREBLE

BALANCE

HEADPHONE VOLUME

3D CINEMA SOUND

You can adjust the volume balance between

the left and right speaker.

2 :turn the left speaker’s volume level up.

3 : turn the right speaker’s volume level up.

HEADPHONE VOLUME

D0019-EN

Adjust the volume of the sub-picture sound

which is heard through the headphones when

set to 2-pictures multi.

2 :Reduce volume

3 : Increase volume

• Functions in the “SOUND” menu other

than “HEADPHONE VOLUME” work

for the TV speakers. They do not work for

the sound from the headphones.

• When the headphones are connected and

only one screen is displayed, only

• When not set to 2-pictures multi, the

headphone volume is adjusted with the

r q (volume) buttons.

“HEADPHONE VOLUME” can be used.

STEREO / I • II

When you are viewing a bilingual broadcast

programme, you can choose the sound from

Bilingual I (Sub I) or Bilingual II (Sub II). If

you have poor reception on a stereo

broadcast, you can change from stereo to

mono sound so that you can hear the

broadcast more clearly and easily.

3D CINEMA SOUND

Press the 3 button to set the 3D CINEMA

SOUND effect when 3D CINEMA SOUND

is set to ON or MONO.

Choose 3D CINEMA SOUND. Then

press the a or 3 button to display

the sub-menu.

s: Stereo sound

v : mono sound

> 3D CINEMA SOUND

t : Bilingual I (sub I)

u : Bilingual II (sub II)

SURROUND

BASS BOOST

MID

• The sound mode you can choose differs

depending on the TV programme.

• This function does not work in the EXT

modes.

D0111-EN

„ SURROUND

Adjust the surround effect.

You can choose HIGH, MID or LOW.

Choosing LOW will reduce the surround

effect and choosing HIGH will increase the

surround effect.

BASS

You can adjust the low tone of the sound.

2 :weaker

3 : strong

„ BASS BOOST

Adjust the bass sound.

You can choose HIGH, MID or LOW.

Choosing LOW will reduce the bass sound

and choosing HIGH will increase the bass

sound.

TREBLE

You can adjust the high tone of the sound.

2 :weaker

3 : strong

FEATURES menu

To cancel the SLEEP TIMER

function:

Press the 2 button to set the period of

time to “OFF”.

FEATURES

SLEEP TIMER

CHILD LOCK

APPEARANCE

BLUE BACK

TYPE A

CHILD LOCK

When there is a TV channel you do not want

your children to watch, you can use the

CHILD LOCK function to lock out the TV

channel. Even when a child chooses a

programme number (PR) for a locked TV

channel the screen will change to blue and

display n (CHILD LOCK) so the TV channel

cannot be viewed. Unless you enter a pre-set

ID number by a special operation, the lock

cannot be released and the child cannot view

the TV channel.

D0023-EN

SLEEP TIMER

You can set the TV to automatically turn off

after a set period of time.

1 Choose SLEEP TIMER. Then press

the a or 3 button

A Sub-menu of the SLEEP TIMER

function appears.

„ To set the CHILD LOCK function

> SLEEP TIMER

1 Choose CHILD LOCK, then press

the 0 button

120

OFF

“SET ID NO.” (ID number setting screen)

appears.

>> SET ID NO.

D0024-EN

0040

2 Press the 5 buttons to set the

period of time.

Then press the a button

You can set the period of time for up to

120 minutes (2 hours) in 10 minute steps.

• One minute before the SLEEP TIMER

function turns off the TV, “GOOD

NIGHT!” appears.

• The SLEEP TIMER function cannot

be used to turn off the TV’s main

power.

• When the SLEEP TIMER function is

on, you can display the sub-menu of

the SLEEP TIMER function again to

confirm or change the remaining

period of time of the SLEEP TIMER

function. Press the a button to leave

the menu after confirming or changing

the remaining time.

D0025-EN

2 Set the ID number to your liking

1 Press the 6 buttons to choose

a number.

2 Press the 5 buttons to move

the cursor.

3 Press the a button

The Sub-menu of CHILD LOCK appears.

> CHILD LOCK

BBC1

BBC2

ITV

CH4

CH5

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

LOCK

D0026-EK

FEATURES menu

If you have forgotten the ID

number:

Perform step 1 of “To set the CHILD

LOCK function”. After confirming the ID

number, press the b button to exit the

menu.

4 Press the 6 buttons to choose a

TV channel

Every time you press the 6 buttons, the

Programme number (PR) changes, and the

picture of the TV channel registered in the

Programme number (PR) is displayed on

the screen.

• Even if you reset the lock temporarily,

it does not mean that the CHILD

LOCK function set for the TV channel

is cancelled. The next time anyone

tries to view the TV channel, it will be

locked again.

• When you want to cancel the CHILD

LOCK function, you must perform the

operation “To set the CHILD LOCK

function” again.

5 Press the blue button and set the

CHILD LOCK function.

Then press the a button

n (CHILD LOCK) appears and the TV

channel is locked.

To reset the CHILD LOCK function:

Press the blue button again.

n (CHILD LOCK) disappears.

• To stop it being easy to choose the

programme number (PR) of a locked

TV channel, the programme number

(PR) has been set so that it cannot be

chosen with the 6 buttons or the

buttons of the TV.

To disable easy resetting of the CHILD

LOCK function, the menu disappears if

you choose the CHILD LOCK function

and press the a button.

• To stop it being easy to reset the lock,

“ID NO.” (ID No. input screen) is set

so that it cannot appear unless you

„ To view a locked TV channel

1 Choose a programme number (PR)

of a locked TV channel with the

number buttons or PR LIST

The screen changes to blue and the n

(CHILD LOCK) appears. You cannot

view the TV channel.

press the

(Information) button.

APPEARANCE

Press the 5 button and choose the format

in which the channel number is displayed

from the three types: TYPE A, TYPE B and

TYPE C.

D0027-EN

2 Press the

(Information) button to

display “ID NO.” (ID No. input

screen)

BLUE BACK

You can set the TV to automatically change

to a blue screen and mute the sound if the

signal is weak or absent, or when there is no

input from an external device.

ID NO.

D0028-EN

3 Press the number buttons to enter

the ID number

ON:

This function is turned on.

The lock is temporarily released so you

can view the TV channel.

OFF:

This function is turned off.

SET UP menu

SET UP

EDIT/MANUAL

AUTO PROGRAM

EDIT/MANUAL

LANGUAGE

PICTURE TILT

DECODER(EXT-2)

EXT SETTING

The EDIT/MANUAL functions are divided

into two types:

• editing the current programme numbers

(PR) (EDIT functions); and

• manually storing a TV channel you want

to view on a particular programme

number (PR) (MANUAL function).

D0029-EN

Here are the details about these functions:

AUTO PROGRAM

MOVE:

This function changes the programme

number (PR) of a TV channel.

You can again perform the AUTO

PROGRAM function TV channel automatic

registration which was performed in the

“Initial settings” (page 8).

To receive SKY 1 you need a satellite tuner.

You must have the satellite tuner set to SKY

1 before starting the AUTO PROGRAM

function.

ID:

This function registers a channel name (ID)

to a TV channel.

INSERT:

This function adds a new TV channel in the

current programme numbers (PR) list by

using the CH number.

• You cannot use the INSERT function if

you do not know the channel number of a

TV channel. Use the MANUAL function

to register a TV channel in the programme

number (PR).

1 Choose AUTO PROGRAM, then

press the a or 3 button

The COUNTRY menu appears as a sub-

menu of the AUTO PROGRAM function.

There are two COUNTRY menus.

Pressing the yellow button changes the

COUNTRY menu as follows:

DELETE:

This function deletes a TV channel you do

not want to list.

> COUNTRY

MANUAL:

This function manually stores a new TV

channel in a programme number (PR).

START

Caution

• Using the MOVE, DELETE or INSERT

functions rewrites the current programme

numbers (PR) list. Therefore, the

> COUNTRY

programme numbers (PR) of some of the

TV channels will change.

• Using the MANUAL function for a TV

channel for which the CHILD LOCK

function has been set cancels the CHILD

LOCK function for that channel.

START

• Using the MANUAL function for a TV

channel for which the DECODER (EXT-2)

function has been set to ON returns the

setting of the DECODER (EXT-2) function

for that channel to OFF.

• When a TV channel has already been

registered in PR 99, using the INSERT

function deletes that TV channel.

D0003-EN

2 Press the 5 and 6 buttons to

choose the country where you are

3 Perform steps 5 and 6 of the “Initial

settings” (page 9)

SET UP menu

• The CH/CC number is a number

unique to the TV and corresponds to

the channel number of a TV channel.

For the relationship between a channel

number and a CH/CC number, see

“CH/CC NUMBER” on page 37.

„ Basic operation

1 Choose EDIT/MANUAL, then press

the a or 3 button

The EDIT menu appears.

> EDIT

„ MOVE

BBC1

BBC2

ITV

CH4

CH5

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

1 Press the 6 buttons to choose a

TV channel

Every time you press the 6 buttons, the

programme number (PR) changes and the

picture of the TV channel stored in the

programme number (PR) appears on the

screen.

MANUAL

MOVE

INSERT DELETE

D0038-EK

2 Follow the description for the

function you want to use

2 Press the 3 button to start the

MOVE function

> EDIT

3 Press the a button to complete

the settings

BBC1

CH 21

The T-V LINK menu appears.

BBC2 CH 22

ITV

CH4

CH5

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

T-V LINK

DOWNLOAD TV

VCR

STORE

D0030-EK

EXIT

D0005-EN

3 Press the 6 buttons to choose a

If you do not have a T-V LINK

compatible VCR connected:

Press the b button to exit the T-V LINK

menu.

new programme number (PR)

To cancel the MOVE function:

Press the b button.

The T-V LINK menu disappears.

4 Press the 2 button to change the

programme number (PR) of a TV

channel to a new programme

number (PR)

If you have a T-V LINK compatible

VCR connected to the EXT-2 terminal:

Follow “Downloading the data to VCR” on

page 11 to transmit the programme number

(PR) data.

• For programme number PR 0, “AV”

appears in the programme numbers (PR)

list.

• An EXT terminal number does not appear

in the programme numbers (PR) list.

SET UP menu

„ DELETE

4 Press the blue button to display the

ID LIST (channel name list)

1 Press the 6 buttons to choose a

TV channel

> EDIT

Every time you press the 6 buttons, the

programme number (PR) changes and the

picture of the TV channel stored in the

programme number (PR) appears on the

screen.

ID LIST

MBC

MCM

MDR

MOVIE

MTV

BBC1

BBC2

ITV

CH4

CH5

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

MTV3

2 Press the yellow button to delete

the TV channel

D0033-EK

The TV channel is deleted from the

programme numbers (PR) list.

5 Press the 6 buttons to choose

the channel name (ID)

„ ID

To cancel the ID function:

Press the b button.

1 Press the 6 buttons to choose a

TV channel

Every time you press the 6 buttons, the

programme number (PR) changes and the

picture of the TV channel stored in the

programme number (PR) appears on the

screen.

6 Press the a button to give a

channel name (ID) to a TV channel

• You can give your own unique channel

name (ID) to the TV channel. When

you have finished step 3, do not go to

step 4. Press the 5 buttons to move

the cursor, and press the 6 buttons

to choose each character of the channel

name (ID). Then press the a button

to register the channel name (ID) to the

TV channel.

2 Press the red button to start the ID

function

> EDIT

BBC1

BBC2

ITV

CH4

CH5

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

Before performing INSERT or

MANUAL operation

ID LIST

• If you register the TV channel (SECAM-

L system) from a French station, be sure

to set the COUNTRY setting to

FRANCE. If the COUNTRY setting is

not set to FRANCE, perform steps 1 and 2

of the “AUTO PROGRAM” (page 33)

procedure and set the COUNTRY setting

to FRANCE before pressing the a

button.

• A CH/CC number unique to this TV and

corresponding to the Channel number of a

TV channel is required. Find the

corresponding CH/CC number from a

table “CH/CC NUMBER” on page 37

based on the Channel number of the TV

channel.

D0031-EK

3 Press the 6 buttons to choose

the first character of a channel

name (ID) you want to give the TV

channel

> EDIT

BBC1

BBC2

ITV

CH4

CH5

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

ID LIST

D0032-EK

SET UP menu

• When the COUNTRY setting is not

FRANCE, use a two-digit CH/CC

number. When the COUNTRY setting is

FRANCE, use a three-digit CH/CC

number.

„ MANUAL

1 Press the 6 buttons to choose a

programme number (PR) for a new

TV channel

„ INSERT

2 Press the blue button to activate

the MANUAL function

1 Press the 6 buttons to choose a

programme number (PR) for which

you will register a new TV channel

> MANUAL

BBC1

BBC2

ITV

CH4

CH5

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

2 Press the green button and start

the INSERT function

> EDIT

SEARCH+

FINE-

BBC1

BBC2

ITV

CH4

CH5

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

FINE+

SEARCH-

D0035-EK

To cancel the MANUAL function:

Press the b button.

When the COUNTRY setting is

IRELAND:

CH/CC

D0034-EK

At the right side following the CH/CC

number, the SYSTEM (broadcasting

system) of the TV channel appears.

To cancel the INSERT function:

Press the b button.

3 When the COUNTRY setting is

UNITED KINGDOM:

3 When the COUNTRY setting is

UNITED KINGDOM:

Press the number buttons to enter

the remaining CH number

• You cannot enter CC numbers.

When the COUNTRY setting is

IRELAND:

Press the 6 buttons to choose

“CH” or “CC”, then enter the

remaining CH or CC number

Continue to step 4

When the COUNTRY setting is

IRELAND:

Press the 3 button to choose the

SYSTEM (broadcasting system) for

a TV channel you want to register

If you do not know the correct

broadcasting system, set the SYSTEM to

“I”. If “I” is not correct, you will not hear

the sound normally when the TV detects a

TV channel. In this case, retry to set the

SYSTEM correctly so that no problem

arises.

The TV shifts to registration mode.

When the registration is completed, the

picture of the TV channel appears on the

screen.

• The CH/CC number is a number given

to each broadcast frequency that

carries a TV channel. If the TV cannot

detect the TV channel corresponding

to the broadcast frequency indicated

by the CH/CC number, a “no-signal”

picture appears.

4 Press the green or red button to

search for a TV channel

Scanning stops when the TV finds a TV

channel. Then the TV channel is

displayed.

SET UP menu

Channel

E2, IR A

E3, IR B

E4, IR C

E5, IR D

E6, IR E

E7, IR F

E8, IR G

Channel

E40

E41

E42

E43

E44

E45

E46

E47

E48

E49

E50

E51

E52

E53

E54

E55

E56

E57

E58

E59

E60

E61

E62

E63

E64

E65

E66

E67

E68

E69

5 Press the green or red button

repeatedly until the TV channel you

want appears

CH 02

CH 03

CH 04

CH 05

CH 06

CH 07

CH 08

CH 09

CH 10

CH 11

CH 12

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

CH 30

CH 31

CH 32

CH 33

CH 34

CH 35

CH 36

CH 37

CH 38

CH 39

CH 40

CH 41

CH 42

CH 43

CH 44

CH 45

CH 46

CH 47

CH 48

CH 49

CH 50

CH 51

CH 52

CH 53

CH 54

CH 55

CH 56

CH 57

CH 58

CH 59

CH 60

CH 61

CH 62

CH 63

CH 64

CH 65

CH 66

CH 67

CH 68

CH 69

If the TV channel reception is poor:

Press the blue or yellow button to fine-

tune the TV channel.

E10, IR H

E11, IR J

E12

6 Press the a button and register

the TV channel to a Programme

number (PR)

E21

E22

E23

The normal EDIT menu is resumed.

E24

E25

„ CH/CC NUMBER

E26

E27

• When you want to use the INSERT

function on page 36, find the CH/CC

number corresponding to the channel

number of the TV channel from this table.

If you want to know a particular TV

channel’s channel menu, look in TV

listings magazines or contact the

broadcaster.

• When the COUNTRY setting is UNITED

KINGDOM, the CC number channels and

the channels from CH/CC 02 to CH/CC 12

cannot be received.

E28

E29

E30

E31

E32

E33

E34

E35

E36

E37

E38

E39

Channel

S31

S32

S33

S34

S35

S36

S37

S38

S39

S40

S41

CC 01

CC 02

CC 03

CC 04

CC 05

CC 06

CC 07

CC 08

CC 09

CC 10

CC 11

CC 12

CC 13

CC 14

CC 15

CC 16

CC 17

CC 18

CC 19

CC 20

CC 21

CC 22

CC 23

CC 24

CC 25

CC 26

CC 27

CC 28

CC 29

CC 30

CC 31

CC 32

CC 33

CC 34

CC 35

CC 36

CC 37

CC 38

CC 39

CC 40

CC 41

CC 75

CC 76

CC 77

CC 78

CC 79

S10

S11

S12

S13

S14

S15

S16

S17

S18

S19

S20

S21

S22

S23

S24

S25

S26

S27

S28

S29

S30

Z+1

Z+2

SET UP menu

LANGUAGE

DECODER (EXT-2)

The LANGUAGE setting which was

performed in the “Initial settings” (page 8)

can be changed.

If you have a decoder connected to a T-V

LINK compatible VCR, which in turn is

connected to the EXT-2 terminal, use the

DECODER (EXT-2) function to unscramble

the scrambled TV channels.

1 Choose LANGUAGE, then press

the a or 3 button

1 Turn on the decoder power

A sub-menu of the LANGUAGE function

appears.

2 Display the scrambled TV channel

on the TV

> LANGUAGE

Even if the decoder is working, a

scrambled picture appears.

3 Display the SET UP menu and

choose DECODER (EXT-2)

SET UP

D0002(E)-EN

AUTO PROGRAM

EDIT/MANUAL

LANGUAGE

PICTURE TILT

DECODER(EXT-2)

EXT SETTING

2 Press the 5 and 6 buttons to

choose a language. Then press the

a button

PICTURE TILT

D0029-EN

There are cases where the Earth’s magnetic

field may make the picture tilt or make

unnatural colours appear in the corner of the

screen. If this happens, you can correct it.

4 Press the 5 buttons to choose

An unscrambled picture appears.

1 Choose PICTURE TILT, then press

the a or 3 button

To cancel the DECODER (EXT-2)

function:

Press the 5 buttons to choose OFF.

The sub-menu of the PICTURE TILT

function appears.

5 Press the a button to complete

the setting

>> PICTURE TILT

The T-V LINK menu appears.

T-V LINK

DOWNLOAD TV

VCR

D0018-EN

2 Press the 6 buttons until the

picture becomes level. Then press

the a button

EXIT

D0005-EN

You can send the programme numbers

data to a VCR with the T-V LINK

function.

SET UP menu

6 Turn on the VCR, and then press

the a button to transmit the data

to VCR

EXT SETTING

1 Choose EXT SETTING, then press

the a or 3 button

The T-V LINK menu disappears once the

data transmission ends.

The EXT SETTING menu appears.

7 If you have another TV channel

capable of being unscrambled with

a Decoder, repeat steps 2 to 6

> EXT SETTING

EXT-1

EXT-3

EXT-5

DUBBING

EXT-2

If the DECODER (EXT-2) function has

been set to “ON” but the TV channel

cannot be unscrambled, check the

following:

EXT-4

ID LIST

• Has the decoder been connected to the

VCR properly according to the VCR

and decoder instruction manuals?

• Has the decoder power been turned

on?

S-IN

D0020-EN

2 Follow the instructions for the

function you want to use and

operate the function

• Can the TV channel be unscrambled

with a decoder?

S-IN:

• Do you need to change the VCR

settings in order to connect the

decoder? Confirm that the VCR is set

properly by rechecking the VCR

instruction manual.

You can enjoy the high-quality picture of

the 2 S-VIDEO signal (Y/C signal).

ID LIST:

You can have a name for each of the

devices connected for each EXT terminal.

DUBBING:

You can choose a signal source to be

output from an EXT-2 terminal.

„ S-IN (S-VIDEO input)

You can connect a device (such as an S-VHS

VCR) to enjoy the high-quality picture of the

S-VIDEO signal (Y/C signal).

Preparation:

• First read the device’s instruction manual

and “Additional preparation” on page 42

to connect the device to the TV properly.

Second, follow the device’s instruction

manual to set the device so that it sends an

S-VIDEO signal (Y/C signal) to the TV.

• Do not set S-IN (S-VIDEO input) to an

EXT terminal connected to a device

which cannot output an S-VIDEO (Y/C

signal). If it is set wrongly, a picture

cannot appear.

SET UP menu

„ ID LIST

1 Press the 5 or 6 buttons to

You can store a name for each of the devices

connected to each EXT terminal. Giving a

name to an EXT terminal makes the EXT

terminal number appear on the screen,

together with its name.

choose an EXT terminal

> EXT SETTING

EXT-1

EXT-3

EXT-5

DUBBING

EXT-2

1 Press the 5 or 6 buttons to

choose an EXT terminal

EXT-4

2 Press the blue button to display the

name list (ID LIST)

ID LIST

S-IN

> EXT SETTING

D0110-EN

EXT-1

EXT-3

EXT-5

DUBBING

EXT-2

ID LIST

VHS

2 Press the yellow button and set the

S-IN (S-VIDEO input).

S-VHS

DVC

CAM

SAT

Then press the a button

STB

EXT-4

GAME

DVD

DVR

An S-IN (S-VIDEO input) mark is

displayed. You can view an S-VIDEO

signal (Y/C signal) instead of the regular

video signal (composite signal).

D0021-EN

To cancel the S-IN (S-VIDEO input)

setting:

Press the yellow button and turn off S-IN (S-

VIDEO input) mark. The regular video

signal (composite signal) pictures are

resumed.

3 Press the 6 buttons to choose a

name. Then press the a button

The ID LIST disappears and the name is

assigned to the EXT terminal.

• You cannot assign an EXT terminal

name not found in the name list (ID

LIST).

• The EXT-1 terminal does not support S-

VIDEO signal (Y/C signal) and you

cannot set S-IN (S-VIDEO input) in the

EXT-1 terminal.

To erase a name assigned to the

EXT terminal:

Choose a blank space.

• Setting S-IN (S-VIDEO input) changes

the head character from “E” to “S”. When

an EXT terminal receives a normal video

signal, “E1”, “E2”, “E3” or “E4” appears

on the display. This changes to “S2”, “S3”

or “S5” when it receives an S-VIDEO

signal.

4 Press the a button to complete

the setting

• Even a device which can output an

S-VIDEO signal (Y/C signal) may output

a regular video signal (composite signal)

depending on the device setting. If a

picture cannot appear because the S-IN

(S-VIDEO input) setting has been made,

read the device instruction manual

carefully again to check for the device

settings.

SET UP menu

TV:

„ DUBBING

The picture and sound of the TV channel

you are currently viewing are output from

the EXT-2 terminal.

You can choose a signal source to be output

from the EXT-2 terminal.

You can do this with the output signals of the

devices connected to other EXT terminals, or

with the picture and sound from a TV

channel you are currently viewing.

• During dubbing, you cannot turn off

the TV. Turning off the TV also turns

off the output from the EXT-2

terminal.

1 Press the 5 buttons to choose

• When you choose an EXT terminal as

an output, you can view a TV

programme or a picture from the other

EXT terminal while dubbing the

picture from a device connected to the

EXT terminal onto a VCR connected

to the EXT-2 terminal.

the arrow from the menu

> EXT SETTING

EXT-1

EXT-3

EXT-5

DUBBING

EXT-2

EXT-4

• The RGB signals from TV games

cannot be output. Teletext programmes

cannot be output.

D0022-EN

2 Press the 6 buttons to choose an

EXT terminal or TV.

Then press the a button

The arrow in the menu represents a signal

flow. The left side of the arrow shows a

signal source output from the EXT-2

terminal.

EXT-1/EXT-3/EXT-5:

The output signal of the device connected

to an EXT terminal passes through the TV

and is output from the EXT-2 terminal.

Additional preparation

Connecting external equipment

Connect the equipment to the TV, making

the correct rear panel and front panel

connections.

1 VCR (composite signal)

2 VCR (composite signal/S-VIDEO signal)

3 T-V LINK compatible VCR (composite

signal/S-VIDEO signal)

4 Decoder

5 DVD player (composite signal/S-VIDEO

signal)

Before connecting anything:

• Read the manuals that came with the

equipment.

Depending on the equipment, the

connection method may be different from

the diagram. Also, the equipment settings

may need to change depending on the

connection method.

6 DVD player (composite signal/RGB

signal)

7 DVD player (component video signals;

Pr/Pb/Y)

8 TV game (composite signal/RGB signal)

9 TV game (composite signal/S-VIDEO

signal)

0 Headphones

- Camcorder (composite signal/S-VIDEO

signal)

= SCART cable

~ Audio cable

! Video cable

@ S-VIDEO cable

# Component cable

• Turn off all the equipment including the

TV.

• The “Specifications” on the back cover

give the details of the EXT terminals. If

you are connecting equipment not listed

in the following connection diagram, see

the table to choose the best EXT terminal.

• Connecting cables are not supplied.

HV-36P38SJE

Front of the TV

EXT-5

Back of the TV

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

Additional preparation

HV-32P37SJE/HV-28P37SJE

Back of the TV

EXT-

EXT-1

EXT

-2

EXT-3

Back of the TV

EXT-

EXT-1

EXT-2

EXT-3

AUDIO OUT

Additional preparation

„ Equipment which can output the

S-VIDEO signal (Y/C signal) such

as an S-VHS VCR

„ TV output from the EXT-1 terminal

The video/sound signal of a TV channel you

are viewing is always output from the EXT-1

terminal.

Connect the equipment to an EXT terminal

(but not the EXT-1 terminal).

• Changing over a programme number (PR)

also changes over the TV output from the

EXT-1 terminal.

• The video/sound signal from an EXT

terminal cannot be output.

You can choose between an S-VIDEO signal

(Y/C signal) and a regular video signal

(composite signal). For details of how to

operate the equipment, see “S-IN (S-VIDEO

input)” on page 39.

• Teletext programmes cannot be output.

„ Connecting speakers/amplifier

While referring to the audio equipment

connection diagram, connect the audio

equipment you want to the TV.

„ T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible

VCR to the EXT-2 terminal. If not, the T-V

LINK function will not work properly.

• When connecting a T-V LINK compatible

VCR to the EXT-2 terminal, be sure to

connect the decoder to the VCR. If not,

the T-V LINK function may not work

properly. After you have stored TV

You can use external front speakers to listen

to the TV sound instead of the TV speakers.

Before connecting anything:

• Read the manuals provided with the

amplifier and speakers.

channels in the programme numbers (PR)

list, set the DECODER (EXT-2) function

for the programme number (PR) to ON to

unscramble a scrambled TV channel. For

details, see “EXT SETTING” on page 39.

• Turn the TV and amplifier off.

• To prevent magnetism from the speakers

adversely effecting the TV screen, use

magnetic-shielded speakers for the front

speakers.

• Note that connecting cables are not

supplied.

„ Connecting headphones

Connect the headphones with a stereo mini-

jack (3.5 mm diameter) to the headphone

socket at the TV rear panel.

Back of the TV

• No sound comes from the TV speakers

when the headphones are connected and

only one screen is displayed.

„ Video or sound signal output from

the EXT-2 terminal

Amplifier

Front speakers (Magnetic-shielded type)

You can change over the output of the video/

sound signal from the EXT-2 terminal. This

is useful when you want to dub the video/

sound from another device onto the VCR

connected to the EXT-2 terminal. For details

on how to do this, see “DUBBING” on

page 41.

• The output from the AUDIO OUT

terminal is not interrupted by headphone

connection to the TV. You cannot cut the

sound from the front speaker even if you

connect a headphone to the TV.

• Adjust the volume of the external

speakers with the amplifier.

Troubleshooting

If a problem arises while you are using the TV, please read this troubleshooting guide carefully

before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example,

if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you may

think there is a problem with the TV itself.

Important:

• This troubleshooting guide only covers problems whose causes are not easy to decide. If you

have a question when you are operating a function, read the page(s) for that function carefully,

not this troubleshooting guide.

• If you follow the advice in this troubleshooting guide without any success, unplug the mains

plug and ask for your TV to be repaired. Do not attempt to repair the TV by yourself or to

remove the rear cover of the TV.

–Have the TV and aerial been connected

properly?

–Has the aerial cable been damaged?

–Is the aerial pointing in the right

direction?

„ If you cannot turn on the TV

• Is the mains plug connected to the mains

outlet?

• Is the power lamp lit? If not, press the

main power button.

–Is the aerial itself faulty?

• Make sure you set the VCR/TV/DVD

switch to the TV position. You cannot

turn the TV on when the VCR/TV/DVD

switch is set to the VCR or DVD position.

• If the TV or aerial suffers interference

from other equipment, stripes or noise

may appear in the picture. Move any

equipment such as an amplifier, personal

computer, or a hair drier, that can cause

interference away from your TV. Or try

moving the TV. If the aerial suffers

interference from a radio tower or high-

voltage wire, please contact your local

dealer.

• If the TV suffers interference from signals

reflecting from mountains or buildings,

double-pictures (ghosting) will occur. Try

to change the aerial’s direction or replace

it with one with better directionality.

• Are your COLOUR SYSTEM settings

correct? Follow the description

„ If you cannot turn off the TV

• Make sure you set the VCR/TV/DVD

switch to the TV position. You cannot

turn the TV off when the VCR/TV/DVD

switch is set to the VCR or DVD position.

„ No picture or no sound

• Have you chosen a TV channel with very

poor reception? If so, the BLUE BACK

function will be activated: the entire

screen becomes blue, and the sound is

muted. If you still want to view the TV

channel, follow the description “BLUE

BACK” on page 32 to change the BLUE

BACK function setting to OFF.

“COLOUR SYSTEM” on page 28 to try

to solve the trouble.

• Have the COLOUR and BRIGHT settings

been adjusted properly? Follow the

description “BRIGHT” and “COLOUR”

on page 26 to try to adjust them properly.

• Videotaping teletext is not recommended

because it may not record correctly.

• When a white and bright still image (such

as a white dress) is displayed on the

screen, the white part may look as if it is

coloured. This is unavoidable due to the

nature of the picture tube itself, and not

due to a TV failure. When the picture

disappears from the screen, the unnatural

colours will also disappear.

• If the SYSTEM setting for a TV channel

is incorrect, it may prevent the sound

from being issued. Follow the description

“EDIT/MANUAL” on page 33 to use the

MANUAL function to try to change the

SYSTEM setting.

„ Poor picture

• If noise (snow) totally blocks out the

picture, there may be a problem with the

aerial or aerial cable. Check the following

to try to solve the problem:

Troubleshooting

• When viewing images from commercially

available video software products, or

videos from videotapes which have been

recorded improperly, the top of the image

may be distorted. This is due to the

condition of the video signal. There is

nothing wrong with the TV.

„ Other issues

• When the SLEEP TIMER function

operates, the TV is automatically turned

off. If the TV suddenly turns off, try to

press the # (standby) button to turn on

the TV once again. If the TV goes back to

normal, there is no problem.

• Since this TV is designed to make full use

of the resolution of the original video

source, the motion may appear unnatural

when the video source is input with 625p

progressive-scanning component signals.

If this occurs, change the output setting of

the connected device to 625i interlace-

scanning component signal output. See

the instructions that came with the device

for more information.

• When the TV is receiving a wide-screen

signal (WSS) or a signal from an external

device affecting the screen size, the

ZOOM mode automatically changes.

When you want to resume the previous

ZOOM mode, press the c button

again.

• If you bring magnetised equipment such

as a speaker near to your TV, the picture

may be warped or unnatural colours may

appear at the corners of the screen. In this

case, keep the equipment away from your

TV. If speakers cause this to happen, use

magnetically-shielded speakers instead.

• A picture may be tilted due to the earth’s

magnetic field. If so, use the “PICTURE

TILT” on page 38 to correct the tilt.

• It takes a short period of time from the

time an operation such as changing

channels is performed until an image is

displayed. This is not a fault. This is the

time needed for the image to stabilize

before it can be displayed.

„ Poor sound

• Have you adjusted BASS or TREBLE

properly? If not, follow the description

“BASS” or“TREBLE” on page 30.

• When TV channel reception is poor, it can

be hard to hear stereo or bilingual sound.

In this case, follow the description

“STEREO / I • II” on page 30 to hear the

sound more easily by changing it to a

mono sound.

„ If the TV does not respond to the

remote control

• Have the batteries of the remote control

worn out? Follow the description “Putting

the batteries into the remote control” on

page 8 and replace them with new batteries.

• Have you attempted to use the remote

control from the sides or rear of the TV or

from more than seven metres away from the

TV? Use the remote control in front of your

TV or from less than seven metres away.

• When you are viewing a teletext

programme, you cannot operate the

menus. Press the b button to return to

the ordinary TV programme, and then try

operating the menus.

• The TV may make a crackling sound due

to a sudden change in temperature. The

picture or sound may be normal. If you

hear crackling sounds frequently while

you are viewing the TV, there may be

other causes. As a precaution, ask your

service technician to inspect it.

• Touching the screen may cause you to

feel a slight electric shock due to its static

electricity. This is unavoidable due to the

construction of the picture tube. It is not a

problem with the TV. You can rest

assured that this static discharge is not

harmful.

• If the TV suddenly stops responding,

press the main power button on the TV

and turn off the main power. Press the

main power button again to turn on the

TV. If the TV returns to a normal state, it

is not a failure.

• When set to 2-pictures multi, adjust the

headphone sound with HEADPHONE

VOLUME in the SOUND menu.

Specifications

Model

HV-36P38SJE

When the COUNTRY setting is When the COUNTRY setting is

UNITED KINGDOM IRELAND

CCIR B/G, I, D/K, L

PAL, SECAM

COUNTRY setting

Broadcasting systems

Colour systems

CCIR I

PAL

• The EXT terminals also support the • The EXT terminals also support the

NTSC 3.58/4.43 MHz system.

Channels and frequencies

Sound-multiplex systems

Teletext systems

E21-E69

IR A-J, E2-E12, E21-E69, S1-S41, X,

Y, Z, Z+1, Z+2

NICAM (B/G, I, D/K, L) system,

A2 (B/G, D/K) system

FLOF (Fastext), TOP,

WST (World Standard System)

NICAM (I) system

FLOF (Fastext),

WST (World Standard System)

Power requirements

Power consumption

Picture tube size

Audio output

220 - 240 V AC, 50 Hz

141 W (Standby: 2.0 W)

Viewable area 86 cm (measured diagonally)

Rated Power output: TV: 10 W + 10 W, Woofer: 18 W

TV: 2 cm round × 2, (3 cm × 10 cm) oval × 4, Woofer: 16 cm round × 1

Speakers

EXT-1 terminal

Euroconnector (21-pin, SCART)

• Video input, Audio L/R inputs and RGB inputs are available.

• TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal

Euroconnector (21-pin, SCART)

• Video input, S-VIDEO (Y/C) input, Audio L/R inputs and RGB inputs are

available.

• Video and Audio L/R outputs are available.

• T-V LINK functions are available.

EXT-3 terminal

EXT-4 terminal

Euroconnector (21-pin, SCART)

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

RCA connectors × 5

• Component video (Pr, Pb, Y) inputs (625p, 525p, 1125i) and Audio L/R inputs

are available.

EXT-5 terminal

RCA connectors × 3

S-VIDEO connector × 1

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

AUDIO OUT terminal

RCA connectors × 2

• Audio L/R outputs are available.

• Output level 0.5 Vrms.

Headphone jack

Dimensions (W × H × D)

Weight

Stereo mini-jack (3.5 mm in diameter)

TV: 912 mm × 624 mm × 593 mm, Woofer: 435 mm × 230 mm × 120 mm

TV: 70 kg, Woofer: 4 kg

Accessories

Remote control unit × 1 (RM-C1800), Woofer × 1

AA/R6 dry cell battery × 2

We may change the design and specifications without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any

commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of

the owners of copyright of the original picture sources, as this would be an infringement of

Model

HV-32P37SJE/HV-28P37SJE

When the COUNTRY setting is

UNITED KINGDOM

When the COUNTRY setting is

COUNTRY setting

IRELAND

Broadcasting systems

Colour systems

CCIR I

PAL

CCIR B/G, I, D/K, L

PAL, SECAM

• The EXT terminals also support the • The EXT terminals also support the

NTSC 3.58/4.43 MHz system.

Channels and frequencies

Sound-multiplex systems

Teletext systems

E21-E69

IR A-J, E2-E12, E21-E69, S1-S41, X,

Y, Z, Z+1, Z+2

NICAM (B/G, I, D/K, L) system,

A2 (B/G, D/K) system

FLOF (Fastext), TOP,

WST (World Standard System)

NICAM (I) system

FLOF (Fastext),

WST (World Standard System)

Power requirements

Power consumption

220 - 240 V AC, 50 Hz

HV-32P37SJE: 137 W (Standby: 2.0 W)

HV-28P37SJE: 127 W (Standby: 2.0 W)

Picture tube size

HV-32P37SJE: Viewable area 76 cm (measured diagonally)

HV-28P37SJE: Viewable area 66 cm (measured diagonally)

Audio output

Speakers

Rated Power output: 10 W + 10 W

(13 cm × 6.5 cm) oval × 2

EXT-1 terminal

Euroconnector (21-pin, SCART)

• Video input, Audio L/R inputs and RGB inputs are available.

• TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal

Euroconnector (21-pin, SCART)

• Video input, S-VIDEO (Y/C) input, Audio L/R inputs and RGB inputs are

available.

• Video and Audio L/R outputs are available.

• T-V LINK functions are available.

EXT-3 terminal

EXT-4 terminal

Euroconnector (21-pin, SCART)

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

RCA connectors × 5

• Component video (Pr, Pb, Y) inputs (625p, 525p, 1125i) and Audio L/R inputs

are available.

EXT-5 terminal

RCA connectors × 3

S-VIDEO connector × 1

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

AUDIO OUT terminal

RCA connectors × 2

• Audio L/R outputs are available.

• Output level 0.5 Vrms.

Headphone jack

Stereo mini-jack (3.5 mm in diameter)

Dimensions (W × H × D)

HV-32P37SJE: 948 mm × 562 mm × 550 mm

HV-28P37SJE: 854 mm × 508 mm × 493 mm

Weight

HV-32P37SJE: 54.0 kg

HV-28P37SJE: 38.0 kg

Accessories

Remote control unit × 1 (RM-C1800)

AA/R6 dry cell battery × 2

We may change the design and specifications without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any

commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of

the owners of copyright of the original picture sources, as this would be an infringement of

LCT1536-001A-U

0903-T-CR-JMUK

IBM 150P User Manual
Intel M1920 User Manual
Lenovo THINKCENTRE 8792 User Manual
Minicom Advanced Systems 3000 User Manual
NHT Studio Monitor A 20 User Manual
Peavey 260 User Manual
Philips 28PT7108 User Manual
Philips 29PT5221 User Manual
Philips 34PT4323 User Manual
Philips DVP3588K User Manual