COLOUR TELEVISION
Contents
............................
Knowing your TV’s feature
2
HV-29ML25
HV-29VL25
HV-29VL15
.
Remote control buttons and basic functions 3
..............................
TV buttons and functions
5
6
.........................................
Setting up your TV
.................................
Basic setting for picture
Advanced setting for picture
Original Feature for picture
8
..........................
9
.........................
10
11
12
13
14
17
19
20
22
................................
Basic setting for sound
.........................
Advanced setting for sound
..............................................
DVD Function
......................................
Customized setting
TV channel presetting
Additional preparation
.................................
.................................
...........................................
Troubleshooting
..............................................
Specifications
INSTRUCTIONS
GGT0087-001A-H
Remote control buttons and basic functions
1
6
3
7
8
2
9
5
0
4
RM-C1390
No.Press
To
1
2
3
4
5
6
POWER
Turn on or off the TV from standby mode.
Display menu and confirm selected function.
Select and adjust menu function.
Select the desired channel number.
Adjust the volume level.
MENU/OK
5/∞/2/3
CHANNEL M
VOLUME M
TV/VIDEO
EXIT
Select TV or VIDEO terminal input.
On the other hand, you can use this button to EXIT from the menu.
Turn off the volume. Press this button again to resume the volume.
Display the programme number or video terminal number and PR list (channel
list) on the screen. You can select the channel using the PR list.
7
8
MUTING
DISPLAY
/BACK
1
2
Press the DISPLAY/BACK button once to display the PR list.
Press 5/∞/2/3 button to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite
channels are indicated with coloured mark.
On the other hand, you can use this button to return to the previous menu.
Select the programme number. For two digits programme number, press -/--,
then press the number button.
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
9
0
0~9, -/--
RETURN,
2 Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!”
appears.
To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!”
appears.
b) Return to the previously viewed channel, if you have not set or have cancelled
the Return channel as above.
3
Remote control buttons and basic functions (continued)
How to operate menus and menu locations
TO
Operation
Press the MENU/OK button 2.
Note
Display the MENU.
To exit the MENU, press the DISPLAY/
BACK button 8 or choose EXIT menu or
TV/VIDEO/EXIT button 6.
Display the top.
Press 2/3 buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Press ∞ button 3 to display next page
for more functions.
Display the 2nd
menu.
Press 5/∞ buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Display the 3rd
menu.
Press 5/∞ buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Return to the
Press the DISPLAY/BACK button* 8.
–
previous menu.
Choose the setting
of a function.
Adjust the effect
level of a function.
Display the sub
menu of a function.
Press 5/∞ buttons 3 to choose a function.
Press the MENU/OK button 2 to exit
from the menu.
Then press the 2/3 buttons 3 to change the setting.
Press 5/∞ buttons 3 to choose a function.
Then press the 2/3 buttons 3 to adjust the effect level.
Press 5/∞ buttons 3 to choose a function.
Then press MENU/OK button 2 to display the sub menu.
–
The following chart shows locations of functions in menus.
In this manual, location of a function is described as follows:
MENU
MENU
Top menu
Top menu
2nd menu
2nd menu
3rd menu
Note: Some functions have the 4th menus as the sub-menus.
Top menu
2nd menu
Location 3rd menu
Location
MENU
PICTURE
PICTURE MODE
P.8
PICTURE SETTING
P.8
CONTRAST
BRIGHT
SHARP
P.8
P.8
P.8
P.8
P.8
COLOUR
TINT
WHITE BALANCE
DIGITAL VNR
STEREO / I•II
BASS
P.8
P.14
P.11
P.11
P.11
P.11
P.12
P.12
P.13
SOUND
TREBLE
BALANCE
AI VOLUME
CINEMA SURROUND
DVD MENU
FEATURES
AUTO SIGNAL DETECT
DVD PICTURE MODE
WHITE BALANCE
P.13
P.13
P.13
P.13
P.13
SOUND MODE
CINEMA SURROUND
SLEEP TIMER
P.14
P.14
P.15
P.9
CHANNEL GUARD
CHILD LOCK
ZOOM
FAVORITE SETTING
SETUP TOUR
P.15
P.16
P.17
P.17
P.8
INSTALL
AUTO PROGRAM
EDIT/MANUAL
COLOUR SYSTEM
LANGUAGE
P.14
P.10
P.16
P.16
P.9
TELETEXT LANGUAGE
APPEARANCE
VIDEO - 3 SETTING
BLUE BACK
AUTO SHUTOFF
PICTURE TILT
P.16
P.9
4
TV buttons and functions
The illustrations shown below is for HV-29ML25 and HV-29VL25 only, which are used for explanation
purpose. Your TV may not look exactly the same as illustrated.
Front of the TV
-
0
9
8
7
6
5
4
3
2
1
HV-29ML25
IN(VIDEO-4)
CHANNEL
VOLUME
-
0
9
8
7
6
5
4
3
2
1
HV-29VL25
CHANNEL
VOLUME
IN(VIDEO-4)
Rear of the TV
HV-29ML25
HV-29VL25
=
~
!
@
#
No. Button/terminal
Description
1
I (main power)
Power lamp
Press to turn on or turn off the TV’s main power.
Indicate the TV is being turned on or off.
2
No colour : TV’s main power is being turned off.
Red : TV’s main power is being turned on.
3
4
5
6
7
8
9
0
-
=
~
!
@
#
Not Application
Remote control sensor
TV/VIDEO
VOLUME M
CHANNELM
MENU
Press to select TV or video mode.
Press to adjust the volume level.
Press to select the desired channel.
Press to display the menu.
Video and audio input jacks for VIDEO-4 mode.
S-VIDEO signal input for VIDEO-4 mode.
Headphone jack.
IN (VIDEO-4)
S-VIDEO
VIDEO-1
VIDEO-2
Video or S-VIDEO, and audio input jacks for VIDEO-1 mode.
Video and audio input jacks for VIDEO-2 mode.
VIDEO-3/COMPONENT Video or COMPONENT, and audio input jacks for VIDEO-3 mode.
OUTPUT
Video and audio output jacks.
Aerial socket.
How to operate the menus with the TV button
Work as same as the button on the
remote control unit
TV button
Note
MENU
MENU/OK button
To display main menu and exit
menu after finish setting.
CHANNEL M
VOLUME M
∞/5 button
2/3 button
To select menu function.
To adjust the desired function.
5
Setting up your TV
CAUTION
• Turn off the equipment including the TV before
connecting.
2 Connecting the compatible main plug
to the AC outlet.
1 Connecting the aerial cable.
VHF/UHF outdoor aerial
Rear of the TV
3 Inserting batteries into the remote
control.
75 -ohm coaxail cable
(not supplied)
Insert two batteries by following the ª and
· polarities and inserting the · end first.
If you connect a VCR, connect the aerial
output jack of your VCR and the aerial jack
on the TV with the aerial cable. Then
connect the output jacks of your VCR and the
VIDEO-1 input jacks of the TV with the video
cable and audio cables. For details, see the
manual of your VCR.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly,
fit new batteries. The supplied batteries are
for testing, not regular use.
VHF/UHF outdoor aerial
Rear of the
TV
4 Turn on the TV by pressing the main
power button.
JVC logo appears on the screen.
To video
output
To audio
output
To RF
output
To S-video
output
VCR
To aerial input
JVC logo will appear on the screen again at
the phase of “SETUP TOUR RESTART?”
function. Then the initial setting can be
performed according to page 7.
The illustration shown is just a sample. It may
not be same as your TV.
6
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing MENU/OK button or any keys, then operate the TV by following the
steps as below:
êìëëäàâ
ꢀ
• Press 5/∞ button to
select your desired
language.
• TV will start searching
for the channels.
• Press 5/∞ button to
select your desired
Teletext language
groups. For details,
see page 10.
To stop AUTO PRO-
GRAM, press MENU/OK
button.
• To complete the initial setting,
• After that, when turn
press the MENU/OK button. To
edit the channel list, see page
18.
on the TV at the next
time. “SETUP TOUR
RESTART?” will be
displayed. Press the
MENU/OK button to
cancel the SETUP TOUR
RESTART function. If
you want to make
initial settings again
when the next time you
turn on the TV, press
the Red button to
activate the SETUP
TOUR RESTART
function.
7
Basic setting for picture
To operate this function with a menu:
COLOUR SYSTEM
You can select the appropriate colour system
when the picture is not clear or no colour
appears.
❇
MENU
PICTURE
PICTURE MODE
To return the USER setting to the default, press
the blue button when the PICTURE SETTING
menu appears.
Press the COLOUR SYSTEM button to select a
setting.
AUTO
NTSC4.43
To operate this function with a menu:
PAL
SECAM
NTSC3.58
PICTURE SETTING
You can adjust the desired picture setting when
selecting USER in PICTURE MODE.
❇
MENU
INSTALL
COLOUR SYSTEM
1 Select the USER in PICTURE MODE under
PICTURE menu.
For the colour system in each country or region,
see the table below:
MENU
PICTURE
PICTURE MODE
❇
USER
Area
Country or Region
System
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore,
2 Select the PICTURE SETTING in PICTURE
menu, then adjust the setting.
PAL
MENU
PICTURE
PICTURE SETTING
❇
Asia, Middle Thailand, India, etc.
East
China, Vietnam, etc.
Hong Kong, etc.
Islamic Republic of Iran, Lebanon,
Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc. NTSC
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
PAL
PAL
CONTRAST
2 : Lower contrast
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
BRIGHT
SHARP
COLOUR
TINT*
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
SECAM
SECAM
PAL
PAL
*TINT can only be adjusted in NTSC system.
When you select to VIDEO-3 mode. You can not
adjust SHARP.
Europe
PAL
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
PAL
SECAM
WHITE BALANCE
You can change the white balance of the picture
to better match the type of video being viewed.
Select the WHITE BALANCE in the PICTURE
menu, then choose the desired setting.
Egypt, Morocco, etc.
PICTURE MODE
You can choose the desired picture setting with
one-touch.
❇
MENU
PICTURE
WHITE BALANCE
MID
WARM
COOL
Normal white balance.
Reddish white.
Bluish white.
Press the PICTURE MODE button to select a
setting.
When you select to VIDEO-3. You cannot adjust
WHITE BALANCE. You can adjust it in DVD
Menu.
SOFT
Softens contrast and sharpness.
Heightens contrast and sharpness.
Standard picture setting.
You can change this picture setting
as you like.
BRIGHT
STANDARD
USER
Select USER and adjust following
items in the PICTURE SETTING menu.
(CONTRAST, BRIGHT, SHARP, COLOUR,
TINT*)
*TINT can only be adjusted in NTSC system.
When you select to VIDEO-3 mode. You can not
adjust SHARP.
❇ About the basic operations of the menu,
please see the “How to operate menus
and menu locations” on page 4.
8
Advance setting for picture
BLUE BACK
You can set the TV to automatically change to a
blue screen and mute the sound if the signal is
weak or absent, or when there is no input from
an antenna.
Select the BLUE BACK in the INSTALL menu,
then choose ON or OFF.
❇
MENU
INSTALL
BLUE BACK
If you wish to continue viewing the poor picture,
cancel the BLUE BACK function.
ZOOM
You can change the screen size according to the
picture aspect ratio. Choose the optimum one
from three ZOOM modes.
1 Select the ZOOM in the FEATURES menu,
then press the MENU/OK button.
MENU
FEATURES
ZOOM
❇
2 Press the 5/∞ buttons to choose a ZOOM
mode. Then press the MENU/OK button.
PICTURE TILT
Correcting the Slanting Picture (PICTURE TILT)
You can correct the picture tilt caused by the
earth’s magnetic force.
1 Select the PICTURE TILT in the INSTALL
menu, then press MENU/OK button.
MENU
INSTALL
PICTURE TILT
❇
The Following display appear.
2 Press the 5/∞ buttons until the picture
become level. Then press the MENU/OK
button.
❇About the basic operations of the menu,
please see the “How to operate menus
and menu locations” on page 4.
9
Original features for picture
TELETEXT (Except HV-29VL15 only)
TELETEXT LANGUAGE
You can watch the Teletext broadcast channel
with TEXT function.
1 Press the TEXT button to select the desired
mode as follows:
You can set the Teletext language group that
corresponds to the programmes. Select TELETEXT
LANGUAGE in the INSTALL menu, then choose
the desired language group.
❇
MENU
INSTALL
TELETEXT LANGUAGE
Group
Languages
2 Press the CHANNEL -/+ buttons, number
buttons or colour buttons to select other
Teletext pages.
3 Press TEXT or TV/VIDEO button to return to
TV mode. You can also operate the teletext
using the following buttons:
GROUP-1 Turkish, Hungarian, English, German,
French, Italian, Spanish, Portuguese,
Greek, Swedish, Finnish
GROUP-2 Polish, Serbian, Croatian, Slovenian,
Czech, Slovak, Rumanian, Hungarian,
German, French, Italian, Swedish,
Finnish
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian,
Estonian, Ukrainan, Czech, Slovak,
English, German, Rumanian
GROUP-4 Arabic, Czech, Slovak. Hungarian,
English, German, French, Italian,
(Hold)
Hold a teletext page. The
(Hold) are displayed at the top
left of the screen. To cancel,
press
(Hold) button again.
(Reveal)
Display the hidden text (e.g.
answers to a quiz). To cancel,
press
(Reveal) button again.
Spanish, Portuguese, Swedish, Finnish
(Size)
Enlarge the teletext display.
GROUP-5 Farsi, Czech, Slovak. Hungarian,
English, German, French, Italian,
(Index)
Return to the index page
instantly.
Spanish, Portuguese, Swedish, Finnish
(Cancel)
Watch TV programme while
Depending on the broadcast, the language set
may not display properly. For details, see in page
8.
waiting for a teletext page. When
the teletext page is found, a page
number appears at the upper left
of the screen. Press
to view the teletext page.
(Sub-page) Operate the (Sub-page)
(Cancel)
function. Sub-page numbers are
displayed at the left of the
screen. To cancel sub-page
function, press
button again.
(Sub-page)
❇ About the basic operations of the menu,
please see the “How to operate menus
and menu locations” on page 4.
10
Basic setting for sound
SOUND SYSTEM
ADJUSTING THE SOUND
You can select an appropriate sound system when
abnormal sound occurs even when the picture
appears normally.
You can adjust the sound setting.
Select the BASS, TREBLE and BALANCE in
SOUND menu, then adjust the setting.
Press the SOUND SYSTEM button to select a
setting.
❇
MENU
SOUND
BASS
BASS
TREBLE
2 : Weaker
2 : Weaker
3 : Stronger
3 : Stronger
B/G
I
D/K
M
BALANCE 2 : Left speaker level up 3 : Right speaker level up
The function is not available in video mode.
For the sound system in each country or region,
see the table below:
*When you select SOUND MODE of DVD menu in
VIDEO-3 to DYNAMIC or SOFT, you cannot
adjust BASS and TREBLE.
Area
Country or Region
System
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc. B/G
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India, etc.
East
China, Vietnam, etc.
Hong Kong, etc.
D/K
I
Islamic Republic of Iran, Lebanon,
Saudi Arabia, etc.
B/G
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
M
D/K
D/K
B/G
I
Europe
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
B/G
I
B/G
B/G
Egypt, Morocco, etc.
STEREO / I•II (
)
You can enjoy the stereo and bilingual broad-
casted programmes. Press the
select the desired mode.
button to
Select stereo sound.
Select monaral sound.
I
Select bilingual I (sub I).
II
Select bilingual II (sub II).
MONO
Cancels the Multi Sound functions, and
the sound becomes monaural.
This Function is not available in video mode.
To operate this function with a menu:
❇
MENU
SOUND
STEREO / I•II
11
Advanced setting for sound
AI VOLUME
You can adjust the volume of all the channels and
video inputs to the same level automatically.
Select the AI VOLUME in SOUND menu, then
choose ON or OFF.
MENU
SOUND
AI VOLUME
❇
CINEMA SURROUND
You can enjoy an enhanced sound for wider
audience. Press the CINEMA SURROUND button
to select a setting.
OFF
Cancel the function.
HIGH
Listen to sound with more wider audience
effect.
LOW
Listen to sound with less wider audience effect.
MONO Listen to mono sound with stereo effect.
To operate this function with menu:
MENU
SOUND
CINEMA SURROUND
❇
If slight volume distortion occurs when you select
HIGH mode, change the setting to LOW mode.
The CINEMA SURROUND effect will be less
noticeable.
12
DVD FUNCTION
AUTO SIGNAL DETECT
SOUND MODE
When the DVD input signal is detected. The input
mode will be changed to VIDEO-3 automatically.
You can choose the desired sound setting for the
DVD. Select the SOUND MODE in DVD MENU
under FEATURES menu, then choose the desired
setting.
For The DVD player, press the “POWER ON”
button of the machine so that the signal can be
detected.
❇
MENU
FEATURES
DVD MENU
For the VTR, press the “POWER ON” button of
the machine, and then press the “PLAY” button,
so that the signal can be detected and display
DVD menu.
SOUND MODE
DYNAMIC Adjust bass and high pitch
SOFT
USER
Soften the sound
You can adjust bass and treble Sound
menu as you like.
You can use blue button for reset bass /
treble to center.
Select the AUTO SIGNAL DETECT in DVD MENU
under FEATURES menu then choose ON or OFF
(Factory setting is ON).
❇
MENU
FEATURES
DVD MENU
*When you use Sound mode is DYNAMIC or
SOFT the Bass and Treble in sound menu
cannot operate.
AUTO SIGNAL DETECT
DVD PICTURE MODE
You can enhance the picture quality of the DVD.
Select the DVD PICTURE MODE in DVD MENU
under FEATURES menu, then choose the desired
setting.
CINEMA SURROUND
You can enjoy an enhanced sound for the DVD.
Select the CINEMA SURROUND in DVD MENU
under FEATURES menu, then choose the desired
setting.
❇
MENU
FEATURES
DVD MENU
DVD PICTURE MODE
❇
MENU
FEATURES
DVD MENU
CINEMA SURROUND
OFF
Cancel the function.
For details, see “CINEMA SURROUND” on page 12
CLEAR-1 Select when the disc is with lots of noise
(To soften the picture).
CLEAR-2 Select when the disc is with less noise
(To sharpen the picture).
*When you use VIDEO-3 to display the DVD
signal or Video signal then WHITE BALANCE,
DIGITAL VNR function in PICTURE menu/
BASS, TREBLE, CINEMA SURROUND function
in SOUND menu/ SHARP function in PICTURE
SETTING menu can’t operate.
WHITE BALANCE
You can change the white balance of the DVD
picture. Select the WHITE BALANCE in DVD
MENU under FEATURES menu, then choose the
desired setting.
❇
MENU
FEATURES
DVD MENU
WHITE BALANCE
For details, see “WHITE BALANCE” on page 8
❇About the basic operations of the menu,
please see the “How to operate menus
and menu locations” on page 4.
13
Customized setting
DIGITAL VNR
CHANNEL GUARD
You can reduce the picture noise. Select the
DIGITAL VNR in the PICTURE menu, then choose
a setting of DIGITAL VNR function.
When there is a TV channel you do not want your
children to watch, you can lock out the channel.
Even when a child chooses a programme number
for a locked out channel the screen will change to
blue and display so the channel cannot be
viewed.
❇
MENU
PICTURE
DIGITAL VNR
OFF
MIN
DIGITAL VNR is turned off.
Effect of DIGITAL VNR becomes minimum level.
To set this function:
AUTO Effect of DIGITAL VNR is automatically controlled.
MAX Effect of DIGITAL VNR becomes maximum level.
1 Choose CHANNEL GUARD, then press the
number 0 (AV) button.
If you select MAX, the picture becomes softer
even if the original picture is sharp.
When you select to VIDEO-3 mode. You can not
adjust DIGITAL VNR.
SLEEP TIMER
You can set the TV to turn off automatically to
standby mode after a set time.
2 Set the ID number you want.
To choose a number:
Press the 5/∞ buttons.
To move a cursor:
You can set the
period of time
to a maximum
of 120 minutes
in 10 minutes
step. You must
press “OK”
Press the 2/3 buttons.
3 Press the MENU/OK button.
button for
setting timer.
To operate this function with a menu:
❇
MENU
FEATURES
SLEEP TIMER
When the elapsed of time left one minute,
“GOOD NIGHT!” appears on the screen. You can
display the SLEEP TIMER menu again to confirm
or change the remaining time.
4 Press the 5/∞ buttons to choose a TV
channel.
• The TV shows the TV programme which
the chosen TV channel is now.
5 Press the blue button to set this function to
the TV channel.
LANGUAGE
You can choose your desired on screen display
language. Select the LANGUAGE in the INSTALL
menu, then choose a language.
❇
MENU
INSTALL
LANGUAGE
(CHANNEL GUARD) appears and the TV
channel is locked. To cancel this function:
Press the blue button again.
(CHANNEL GUARD) disappears and the
lock is released.
6 Press the MENU/OK button to complete the
setting. The menu disappears.Press the
blue button again.
❇About the basic operations of the menu,
please see the “How to operate menus
and menu locations” on page 4.
14
Customized setting (continued)
To view a locked TV channel:
EXPLANATION FAVORITE SETTING
1 Choose a programme number in which a
TV channel locked with the number
buttons or PR LIST. The screen changes to
blue and the (CHANNEL GUARD)
appears.
FUNCTION IN FEATURES MENU.
First, there is no register channel in Favorite
channel (Red, Green, Yellow, Blue).
When you press the colours buttons (Red, Green,
Yellow, Blue), the word “NO MEMORY” will
appear.
If you press the colours buttons (Red, Green,
Yellow, Blue), and remain for a while, the word
“FAVORITE CHANNEL 7 PROGRAMMED!” will
appear. This means that you register that channel
to be your favorite channel. If you want to change
your favorite channel in that colour, you must
return to the Function FAVORITE SETTING for
delete the own one first.
• You cannot choose a locked TV channel
with the 5/∞ buttons.
2 Press the DISPLAY button to display “ID
NO.” (ID number input screen).
Select the FAVORITE SETTING in the FEATURES
menu, then choose desired setting.
3 Press the number buttons to enter the ID
number. The lock is temporarily released
so you can view the TV channel.
❇
MENU
FEATURES
FAVORITE SETTING
The following display appear.
If you have forgotten the ID number:
Perform step 1 of “To set this function:” on
page 14. After confirming the ID number,
press the DISPLAY/BACK button or the TV/
VIDEO button to exit the menu.
• When you would like to cancel the
CHANNEL GUARD function, you must
perform the operation “To set this
function” again.
CHILD LOCK
You can disable the front control buttons of the
TV. Select the CHILD LOCK in the FEATURES
menu, then choose ON or OFF.
❇
MENU
FEATURES
CHILD LOCK
❇ About the basic operations of the menu,
please see the “How to operate menus
and menu locations” on page 4.
15
Customized setting (continued)
APPEARANCE
You can change format of Menu display when
selecting Type of APPEARANCE in the INSTALL
menu, then choose the desired setting.
❇
MENU
INSTALL
APPEARANCE
TYPE A : Solid Form
TYPE B : Light Form
TYPE C : Light background Form/Solid bar
VIDEO-3 SETTING
You can set the VIDEO-3 SETTING according to
the video signal output from the external devices
connected to the VIDEO-3 terminal. Select the
VIDEO-3 SETTING in INSTALL menu, then
choose a setting.
❇
MENU
INSTALL
VIDEO-3 SETTING
VIDEO
If a normal video signal (composite
video signal) is input.
COMPONENT If a component video signal (Y/CB/CR
)
is input.
You must choose a setting follow as signal that
you input to VIDEO-3. (If you input the DVD
signal to VIDEO-3, you must choose VIDEO-3
SETTING to COMPONENT.)
For connecting methods, see “Additional Prepara-
tion” on page 19.
AUTO SHUTOFF
You can set the TV to turn off automatically when
no signal is received for about 15 minutes or
longer after the end of a broadcast. Select AUTO
SHUT OFF in INSTALL menu, then choose ON or
OFF.
❇
MENU
INSTALL
AUTO SHUTOFF
The AUTO SHUTOFF function does not turn off
the TV’s main power. The AUTO SHUTOFF
function is not available in video mode.
SETUP TOUR
You can use SETUP TOUR function for making
the initial settings. When you select SETUP TOUR
the LANGUAGE menu ,TEXT LANGUAGE menu ,
AUTO PROGRAM menu , EDIT menu will be
displayed follow as page 7. But “SETUP TOUR
RESTART?” will not be displayed.
Select the SETUP TOUR in INSTALL menu
❇
MENU
INSTALL
SETUP TOUR
16
TV channel presetting
6 Press the green or red button to search for
the TV channel.
Searching stops when a channel is found
and displayed.
To register the TV channels auto-
matically (AUTO PROGRAM)
You can register the TV channels into the TV’s
channel list automatically.
7 Repeat step 5 until your desired TV
channel appears.
1 Display the INSTALL menu.
MENU
INSTALL
❇
If the reception Press the blue or yellow button
is poor
If noisy sound
is heard
to fine tune the TV channel.
Press the 3 button to choose
an appropriate sound system.
2 Choose AUTO PROGRAM, then press the
MENU/OK button.
AUTO PROGRAM function starts, and the
channels received are registered in the
channel list (PR list) automatically.
8 Press the MENU/OK button to exit the
menu.
3 The EDIT menu appears.
To edit the
channel list
Proceed to the Step 3 of “To
edit the channel list (PR list)”
on this page.
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
If a channel is
not registered
Proceed to the Step 3 of “To
register the channel manually”
on this page.
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR
numbers will be changed.
To exit the menu Press the MENU/OK button.
1 Display the INSTALL menu.
For details of “SETUP TOUR”, see page 16.
MENU
INSTALL
❇
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s
channel list manually.
1 Display the INSTALL menu.
MENU
INSTALL
❇
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
3 Choose the channel which you want to
change PR number, or delete.
4 Do the following action:
To change the
PR number
(MOVE)
Press the 3 button. Then move
it to the PR number you want
to use it for the channel.
Finally press the 2 button.
To delete the
channel (DELETE)
Press the yellow button.
3 Choose the channel which you want to
register.
5 Press the MENU/OK button to exit the
menu.
4 Press the blue button to activate the
MANUAL function.
The sound system of the channel appears
at the right of the CH/CC number.
5 Press the 3 button to choose an appropri-
❇About the basic operations of the menu,
please see the “How to operate menus
and menu locations” on page 4.
ate sound system.
For details, see “SOUND SYSTEM” on
page 11.
17
TV channel presetting (continued)
Channel
To add in the new channel
CH
US
CCIR OIRT AUSTRALIA
CH
US
CCIR OIRT AUSTRALIA
(INSERT in the EDIT menu)
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
US- 2
US- 3
US- 4
US- 5
US- 6
US- 7
US- 8
US- 9
US- 10
US- 11
US- 12
US- 13
E2
E3
E4
E5
E6
E7
E8
E9
R1
AU- 0
AU- 1
AU- 2
AU- 6
AU- 7
AU- 8
AU- 9
CH 36 US- 36, W+ 51 E36
CH 37 US- 37, W+ 52 E37
CH 38 US- 38, W+ 53 E38
CH 39 US- 39, W+ 54 E39
CH 40 US- 40, W+ 55 E40
CH 41 US- 41, W+ 56 E41
CH 42 US- 42, W+ 57 E42
CH 43 US- 43, W+ 58 E43
CH 44 US- 44, W+ 59 E44
CH 45 US- 45, W+ 60 E45
CH 46 US- 46, W+ 61 E46
CH 47 US- 47, W+ 62 E47
CH 48 US- 48, W+ 63 E48
CH 49 US- 49, W+ 64 E49
CH 50 US- 50, W+ 65 E50
CH 51 US- 51, W+ 66 E51
CH 52 US- 52, W+ 67 E52
CH 53 US- 53, W+ 68 E53
CH 54 US- 54, W+ 69 E54
CH 55 US- 55, W+ 70 E55
CH 56 US- 56, W+ 71 E56
CH 57 US- 57, W+ 72 E57
CH 58 US- 58, W+ 73 E58
CH 59 US- 59, W+ 74 E59
CH 60 US- 60, W+ 75 E60
CH 61 US- 61, W+ 76 E61
CH 62 US- 62, W+ 77 E62
CH 63 US- 63, W+ 78 E63
CH 64 US- 64, W+ 79 E64
CH 65 US- 65, W+ 80 E65
CH 66 US- 66, W+ 81 E66
CH 67 US- 67, W+ 82 E67
CH 68 US- 68, W+ 83 E68
CH 69 US- 69, W+ 84 E69
R2
R6
R7
R8
R9
You can add in the new channel in the TV
channel list as you like.
You need to find the “CH/CC” number for the TV
channel. Find the “CH/CC” number correspond-
ing to the channel number of the TV channel
from the attached sheet “CH/CC number list” on
this page.
E10 R10
E11 R11
E12 R12
AU- 10
AU- 11
CH 14 US- 14, W+ 29
CH 15 US- 15, W+ 30
CH 16 US- 16, W+ 31
CH 17 US- 17, W+ 32
CH 18 US- 18, W+ 33
CH 19 US- 19, W+ 34
CH 20 US- 20, W+ 35
CH 21 US- 21, W+ 36 E21
CH 22 US- 22, W+ 37 E22
CH 23 US- 23, W+ 38 E23
CH 24 US- 24, W+ 39 E24
CH 25 US- 25, W+ 40 E25
CH 26 US- 26, W+ 41 E26
CH 27 US- 27, W+ 42 E27
CH 28 US- 28, W+ 43 E28
CH 29 US- 29, W+ 44 E29
CH 30 US- 30, W+ 45 E30
CH 31 US- 31, W+ 46 E31
CH 32 US- 32, W+ 47 E32
CH 33 US- 33, W+ 48 E33
CH 34 US- 34, W+ 49 E34
CH 35 US- 35, W+ 50 E35
1 Display the INSTALL menu.
MENU
INSTALL
❇
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
3 Choose the PR number for which you will
register a new TV channel. When you add
a new TV channel of NTSC-M system,
press the SOUND SYSTEM button to
change the sound system to M. Then
proceed to the next step.
4 Press the green button, then press 5/∞
buttons to choose “CC” or “CH”.
5 Press the number button to enter the
remaining CH/CC number.
The TV starts to search the TV channel, and
the picture of the TV channel appears. If
the TV finds no TV channel, a noisy picture
appears.
CC
US
CCIR OIRT AUSTRALIA
CC
US
W+ 2
W+ 3
W+ 4
W+ 5
W+ 6
W+ 7
W+ 8
CCIR OIRT AUSTRALIA
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
S- 1
S- 2
AU- 5
CC 38
CC 39
CC 40
CC 41
CC42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
C 78
S- 38
S- 39
S- 40
S- 41
S- 3
S- 4
S- 5
S- 6
AU- 5A
When a TV channel has already been registered
in PR99, using the INSERT function deletes that
TV channel.
S- 7
S- 8
S- 9
W+ 9
W+ 10
W+ 11
W+ 12
W+ 13
W+ 14
W+ 15
W+ 16
W+ 17
W+ 18
W+ 19
W+ 20
W+ 21
W+ 22
W+ 23
W+ 24
W+ 25
W+ 26
W+ 27
W+ 28
S- 10
S- 11
S- 12
S- 13
S- 14
S- 15
S- 16
S- 17
S- 18
S- 19
S- 20
S- 21
S- 22
S- 23
S- 24
S- 25
S- 26
S- 27
S- 28
S- 29
S- 30
S- 31
S- 32
S- 33
S- 34
S- 35
S- 36
S- 37
❇About the basic operations of the menu,
please see the “How to operate menus
and menu locations” on page 4.
A
B
C
D
E
F
G
H
I
J
K
CH/CC number
When you want to use the INSERT function by
the previous operation, find the CH/CC number
corresponding to the channel number of the TV
channel from this table.
L
M
N
O
P
Q
R
S
T
U
V
W
W+ 1
X
Channel No. Country
Y
Z
Z+ 1
Z+ 2
R3
R4
R5
AU- 3
AU- 4
US
United States, Philippines, etc..
Middle East, Southeast Asia, etc..
Eastern Europe, Russia, Vietnam, etc..
CCIR
OIRT
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
A- 5
A- 4
A- 3
A- 2
A- 1
AUSTRALIA Australia, etc..
18
Additional preparation
Connecting the external devices
Connect the devices to the TV, paying attention to
the following connection diagram.
Before connecting anything:
• Read the manuals provided with the
devices. Depending on the devices, the
connection method may differ from the
figure. In addition, the device settings may
be changed depending on the connection
method to secure proper operation.
(Behind the cover)
• Turn off all the devices including the TV.
• The “Specifications” on page 22 contains
the details of the VIDEO terminals. If you
are connecting a device not listed in the
following connection diagram, see the
“Specifications” to choose the best VIDEO
terminal.
• Note that connecting cables are not
supplied.
1 VCR (composite signal)
2 VCR (S-VIDEO signal; Y/C)
3 VCR for recording (composite signal)
4 DVD player (composite signal)
5 DVD player (S-VIDEO signal; Y/C)
6 DVD player (component video signals; Y.
PB/CB . PR/CR)
7 TV game (composite signal)
8 TV game (S-VIDEO signal; Y/C)
9 Camcorder (composite signal)
0 Camcorder (S-VIDEO signal; Y/C)
- Headphones
19
Troubleshooting
If a problem arises while you are using the TV, please read this “Troubleshooting” well before you
request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug
is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem
with the TV itself.
Important:
• This Troubleshooting guide only covers problems whose causes are not easy to determine. If a
question arise when you are operating a function, read the page(s) corresponding to the
operation of the function well, not this Troubleshooting guide.
• After you have followed the Troubleshooting description or the operating description of the
functions concerned without any success, remove the AC plug from the AC outlet and request a
repair of your TV. Do not attempt to repair the TV by yourself or remove the rear cover of the TV.
IF YOU CANNOT TURN ON THE TV
IF YOU CANNOT TURN ON THE TV
• Is the AC plug connected to the AC outlet?
• Is the POWER lamp lit? If not, press the Main
power button.
• If noise totally obscures the picture (snow),
the aerial or aerial cable may have trouble.
Check the following to try to solve the
trouble: Has the TV and aerial been con-
nected properly? Has the aerial cable been
damaged? Is the aerial pointed to the right
direction? Is the aerial itself faulty?
• If the TV or aerial receives interference from
the other devices, stripes or noise may
appear in the picture. Move such device as an
amplifier, personal computer, or a hair drier
that can cause interference away from your
TV, or try changing its location. If the aerial
suffers interference from a radio tower or
high-voltage wire, please contact your local
dealer.
• If the TV receives interferences from signal
reflecting from mountains or building,
double-pictures (ghosting) will occur. Try to
change the aerial’s direction or replace the
antenna with the one with better directional-
ity.
• Are your COLOUR SYSTEM settings for the
TV channels correct? Follow the description
“COLOUR SYSTEM button” on page 8 to try
to solve the trouble.
NO PICTURE/NO SOUND
• Have you chosen a TV channel whose
reception is extremely bad? In this case, the
BLUE BACK function will be activated, the
entire screen becomes blue, and the sound
is muted. In spite of this, if you want to view
the TV channel, follow the description
“BLUE BACK” on page 9 to try to change the
BLUE BACK function setting to OFF.
• Are your SOUND SYSTEM settings for the
TV channels correct? Follow the description
“SOUND SYSTEM button” on page 11 to try
to solve the trouble.
AUTO SIGNAL DETECT IN DVD
MENU DOES NOT WORK
• Please check that the AUTO DVD DETECT
function is on or off.
• Press button ( VCR or DVD Player ) to turn
the machine off and turn it on again ; do not
turn the machine off and on suddenly.
• Has COLOUR or BRIGHT been controlled
properly? Follow the description “PICTURE
SETTING” on page 8 to try to adjust them
properly.
• Videotaping teletext is not recommended
because it may not record correctly.
• When a white and bright still image (such as
a white dress) is displayed on the screen, the
white part may look as if it were coloured. It
is a phenomenon unavoidable due to the
nature of the picture tube itself, and not due
to a TV failure. When the picture disappears
from the screen, the unnatural colours will
also disappear.
• When viewing images from commercially
available video software products, or videos
from videotapes which have been recorded
improperly, the top of the image may be
distorted. This is due to the condition of the
video signal, and not because of malfunction.
• Inspect the video cable connection on
VIDEO-3 that they are connected properly.
WHEN TV IS NOT VIDEO-3, AUTO
SIGNAL DETECT WORK WHILE VCR
OR DVD PLAYER WAS ON.
• Inspect the video cable connection on
VIDEO-3 that they are connected properly.
• In a certain VCR or DVD Player, the function
might operate by the discontinuity of the
signal.
AFTER TV WAS ON, AUTO DVD
DETECT WORK
• Video signal from VCR or DVD Player cause
the function run properly to indicate that
there are video signal on VIDEO-3 channel.
20
Troubleshooting (continued)
POOR SOUND
OTHER CONCERNS
• Have you adjusted BASS or TREBLE
properly? If not, follow the description
“Adjusting the sound” on page 11 to try to
adjust them properly.
• When the TV channel reception is poor, it
can be hard to hear the stereo or bilingual
sound. In this case, follow the description
“STEREO / I•II” on page 11 to hear the
sound more easily by changing it to a mono
sound.
• When the AUTO SHUTOFF function oper-
ates, the TV is automatically turned off. If the
TV is turned off suddenly, try to press the
POWER button to turn on the TV once again.
At this time, if the TV resumes a normal
state, there is no problem.
• If you bring a magnetized device such as a
speaker near to your TV, a picture may be
warped or unnatural colours appear at the
corners of the screen. In this case, keep the
device apart from your TV. If the speaker
causes such phenomena, use the magnetic-
shielded speaker instead.
• A picture may be tilted due to the influence
of the earth’s magnetism. In this case, use
the “PICTURE TILT” on page 9 to complete
the tilt.
• It takes a short period of time from the time
an operation such as changing channels is
per-formed until an image is displayed. This
is not a malfunction. This is the time
required for the image to stabilize before it
can be displayed.
OPERATION DISABLED
• Have the batteries of the remote control
become exhausted? Follow the description
“Putting the batteries into the remote
control” on page 6 and replace them with
new batteries to try solve the problem.
• Have you attempted to use the remote
control at the sides or rear of the TV or at a
location more than seven meters apart from
the TV location? Operate the remote control
in the front of your TV or a location less than
seven meters from your TV to try to solve
the problem.
• The TV may emit a crackling sound due to a
sudden change in temperature. It does not
matter if a picture or sound does not show
any abnormality. If you hear crackling
sounds frequently while you are viewing the
TV, other causes may be assumed. For
precautionary purposes, request your
service technician to inspect it.
• Touching the screen may cause you feel a
slight electric shock due to its static electric-
ity. It is an unavoidable phenomenon due to
the construc-tion of the picture tube. It is not
a problem with the TV. You can rest assured
that this static discharge does not have
harmful influence over the human body.
• When you are viewing a teletext
programme, you cannot operate the menus.
Press the TV/VIDEO button to return the
teletext programme to the ordinary TV
programme to try operating the menus.
• Is the CHILD LOCK function set to ON? If the
CHILD LOCK function is set to ON, you
cannot operate the TV with the front control
buttons of the TV. Follow the description
“CHILD LOCK” on page 15 to try to set the
CHILD LOCK function to OFF.
• If the TV operation becomes disabled
suddenly, press the Main power button on
the TV and turn off the main power. Try to
press the Main power button again to turn
on the main power. If the TV returns to a
normal state, it is not a failure.
21
Specifications
Broadcasting systems
Colour systems
Channels and frequencies
B, G, I, D, K, K1, M
PAL, SECAM, NTSC3.58/4.43MHz
VHF low channel (VL) = 43.25 MHz ~ 140.25 MHz
VHF high channel (VH) = 147.25 MHz ~ 423.25 MHz
UHF channel (U)
= 431.25 MHz ~ 863.25 MHz
• Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41).
A2 (B/G), NICAM (B/G, I, D/K) system
FLOF(Fastext), WST(World Standard Text)
[Except HV-29VL15 only]
Please see the table in the description “TELETEXT LANGUAGE”
on page 10.
Sound-multiplex systems
Teletext systems
Languages displayed by
[Except HV-29VL15 only]
AC 110 to 240V, 50/60Hz
Power requirements
Audio output
VIDEO-1 terminal
Rated Power output: 10W + 10W
RCA connector x 3, S-VIDEO connector x 1
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are
available.
VIDEO-2 terminal
RCA connector x 3
• Video input and Audio L/R inputs are available.
RCA connector x 5 terminal
VIDEO-3/COMPONENT
• Video input/Component video (Y. PB/CB . PR/CR) input and
Audio L/R inputs are available.
VIDEO-4 terminal
OUTPUT terminal
RCA connector x 3, S-VIDEO connector x 1
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are
available.
RCA connector x 3
• Video output and Audio L/R outputs are available.
Stereo mini-jack (3.5 mm in diameter)
Remote control unit x 1
Headphone jack
Accessories
RM-C1390 [All models]
AA/R6 dry cell battery x 2
(13cm x 6.5cm) x 2
Speakers
Design and specifications subject to change without notice.
Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any
commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent
of the owners of copyright of the original picture sources, as this constitutes an infringement of
copyright.
22
MEMO
23
© 2005 Victor Company of Japan, Limited
0705-NIC-JMT
|