JVC CU VD3U User Manual

ENGLISH

FRANÇAIS

ESPAÑOL

CU-VD3U

DVD Burner

INSTRUCTIONS

Graveur de DVD

MANUEL D'UTILISATION

Grabador de DVD

MANUAL DE INSTRUCCIONES

For Customer Use:

Enter the Model No. and Serial

No. (located on the bottom of the

burner) below. Retain this

information for future reference.

Model No.

Serial No.

Safety Precautions for the Burner

Cleaning Procedure

Be sure to observe the following precautions. Failing to

do so may result in electric shock, fire, injury, or

malfunction.

IMPORTANT:

• Be sure to unplug the burner before beginning

cleaning.

• Do not use liquid or aerosol cleaners.

• Ensure that no moisture or liquid comes into contact

with the drive during cleaning.

• Do not disassemble, dismantle, or modify the

equipment. Requests for repair and inspection should

be made to the dealer.

• Do not insert metal or combustible objects or pour

water or other liquids inside the burner.

Exterior of the Burner:

Wipe dirt off with a dry cloth.

• Turn off the power when connecting equipment.

• Remove the plug when the burner will not be used for

a prolonged time or prior to cleaning (electricity flows

through the equipment even when the power is off).

• Do not block the ventilation holes of the burner.

• Do not use where there is condensation. Suddenly

carrying the burner from a cold location to a hot

location may result in the formation of drops, which

may cause a malfunction or failure.

Disc Tray:

Wipe off dirt with a soft dry

cloth.

Do not touch the lens.

To clean the lens, use

Lens

commercially available lens

cleaning blower for cameras.

Using a lens cleaning disc will

cause malfunction.

• Do not cause the burner to vibrate when discs are in.

Safety Precautions for Accessories

Disc:

• When using the AC adapter, the power cord, and the

USB cable, be sure to observe the following

precautions. Failing to do so may result in electric

shock, fire, injury, or malfunction.

Gently wipe from the inner edge to the outer edge with

a soft cloth.

Storage:

Make sure that discs are kept in their cases. If discs are

piled on top of one another without their protective

cases, they can be damaged. Do not put discs in a

location where they may be exposed to direct sunlight,

or in a place where the humidity or temperature is high.

Avoid leaving discs in your car!

• Do not insert or remove the plug when your hands

are wet.

• Fully insert the plug into the outlet.

• Keep dust and metal objects away from the plug.

• Do not damage the cord.

• Place the cord where it will not trip someone up.

• Do not use when thunder can be heard.

• Do not dismantle.

Region Codes

• Do not use for any product other than this one.

• Do not play the provided CD-ROM with an audio

player. Doing so may damage the circuits or speakers.

Region codes are numbers for restricting DVD video

playback. The world is separated into six regions and

each region is identified by a number. If the number for

a disc does not match the number for the player, the

disc cannot be played on the player.

Safety Precautions for Discs

Do not use the following discs.

• Cracked discs

Changing the region codes

• Deeply scratched discs

You can change the region code to play a DVD that

has a different code. (The code cannot be changed for

some playback software.) When you insert the disc,

the Caution screen appears on the PC. Follow the on-

screen instructions to change the code.

Installation

Do not install in any of the following locations.

• Humid location

• Location of 60 °C or above

• Location subject to direct sunlight

• Location where overheating is likely

• Dusty or smoky locations

• Locations subject to oily smoke or steam such as a

kitchen counter or beside a humidifier

• Unstable location

The region code for the burner can be changed

5 times only. The code set the fifth time becomes the

final code, so be sure to set a frequently used code.

Take sufficient care when changing the code.

Disclaimer

• Bathroom

JVC accepts no liability whatsoever for loss of data

resulting from inappropriate connections or handling.

• Dusty places

• Slanted location

Copyrights

ATTENTION:

On placing the unit:

Some TVs or other appliances generate strong

magnetic fields. Do not place such appliances on top

of the unit as it may cause picture disturbance.

Duplicating copyright protected material, for other than

personal use, without the permission of the copyright

holder is prohibited by copyright law.

Registered Trademarks and

Trademarks

When moving the product:

Remove the power cord and all connecting cables.

• Other company and product names mentioned herein

are registered trademarks and/or trademarks of their

respective holders.

Basic Guide

Getting ready to copy to a DVD!

Get ready a recommended disc

Use DVD-R, DVD-RW or DVD-R DL disc of the brands listed below.

DVD+R, DVD+RW and DVD-RAM cannot be used.

DVD-R

DVD-RW

DVD-R DL (Single-sided double layer)

JVC, Verbatim

JVC, TDK, Verbatim, JVC

SONY

Brand

Caution

z Use a commercially available cleaning cloth to wipe the disc gently if there are any

fingerprints or dirt. Applying too much strength will result in scratches.

z Do not use discs that are scratched.

z DVD-R DL discs can be used only when the burner is connected to a high definition

Everio camera.

Connect

The power lamp lights

in green.

Use the AC adapter to

power on the Everio

camera.

CU-VD3

To DC jack

Power input

To DC jack

USB extension cable

Everio camera

USB cable

Use if necessary.

Important!

z When the DVD created on this burner cannot be played on other devices, play

back using this burner. (A P. 8)

z If you encounter any problems, refer to “Troubleshooting”. (A P. 15)

z Follow the instructions in the instruction manual of the Everio camera when

connecting and operating the Everio camera.

Open the tray and insert the disc

1) Press the eject

button.

2) Pull out completely.

3) Insert firmly into place.

Close the tray

Push in until the tray

Open the LCD monitor

The Everio camera turns on.

snaps in.

Turn the Everio off and on

again if the following display

remains unchanged.

Pay attention to the followings!

zDo not topple

zDo not subject to

mechanical shock

zDo not touch the

recording side

zDo not place any

objects on top

¹Recording and playback may not function properly if the disc is

scratched or dirty.

To copy images to DVD

A P. 8f13

Preparations

completed!

To play back copied images

A P. 8

Contents

zSafety Precautions .................................................................................................. 2

zBasic Guide.............................................................................................................. 4

zGetting Started......................................................................................................... 7

Taking out the USB Cable....................................................................................... 7

Placing the Burner................................................................................................... 7

zCopying to DVD ....................................................................................................... 8

3 Copy Options........................................................................................................ 8

Playing Back Copied Images................................................................................... 8

Copying All Files to the DVD ................................................................................... 9

Copying by Date.................................................................................................... 10

Copying by Event .................................................................................................. 12

Creating Data DVD from a PC (Optional).............................................................. 14

zTroubleshooting .................................................................................................... 15

zSpecifications ........................................................................................................ 17

Accessories

If there are any items missing, please consult your authorized dealer.

AC adapter

(AP-V3U)

Power cord

USB extension cable

Instruction manual

(this manual), other printed

material

Stand

DVD-R (blank disc)

z Use the AC adapter, power cord and USB extension cable supplied with

this burner. Using accessories other than those supplied may result in

electric shock or fire.

Caution

Getting Started

Taking out the USB Cable

Hook the protruding tip with your finger and

pull it towards you

Take out the USB cable

• Can be connected to the USB extension cable.

Placing the Burner

o Horizontal orientation

Take note of the top and bottom of the burner and place it in

the horizontal orientation.

¹Do not place any objects on top of the burner.

o Vertical orientation

Face the feet side towards the left and fix securely on the stand.

Feet

Back

Low side

Arrow

High side

Front

Copying to DVD

3 Copy Options

o Copying All Files to the DVD ....................................................................P. 9

o Copying by Date ........................................................................................P. 10

o Copying by Event ......................................................................................P. 12

Playing Back Copied Images

To AV jack

AV cable

(supplied with Everio)

USB cable

To USB jack

Use the AC adapter to

power on the Everio

camera.

To Audio/Video input

terminals

Access lamp

Connect as shown above and turn on

each device

CREATE DVD

CREATE TOGETHER

• The screen on the right appears on the

Everio camera.

SELECT AND CREATE

CREATE DUPLICATE

PLAYBACK

Switch the TV to an appropriate input

Select “PLAYBACK” and press

PLAYBACK CREATED DISC

• Playback begins automatically.

• To stop, select o using the touch sensor.

Select with

touch sensor

Note

z When opening/closing the disc tray or during

copying/playback, the access lamp lights or blinks

in orange.

Copying All Files to the DVD

z If the operation and display of your Everio camera differs from the following

procedures, refer to the instruction manual of your Everio camera.

z For some Everio cameras, still images cannot be copied.

Caution

Connect CU-VD3 to the Everio camera according to the procedures on

Preparations

P. 4f5 and turn on the Everio camera.

Press the [DIRECT DVD] button

Select with

touch sensor

[DIRECT DVD]

Select “EXECUTE” and press

UNSAVED SCENES

READY TO CREATE

DVD-R

EXECUTE

RETURN

QUIT

The “CREATING NOW” screen

appears and copying starts

CREATING NOW

ELAPSED:

30%

3 min

To cancel, select “STOP” and press

Do not turn off the power or remove the

USB cable while the “CREATING NOW”

screen is displayed.

STOP

When “COMPLETED” appears,

press

to complete copying

COMPLETED

Copying by Date

z If the operation and display of your Everio camera differs from the following

procedures, refer to the instruction manual of your Everio camera.

z For some Everio cameras, still images cannot be copied.

Caution

Connect CU-VD3 to the Everio camera according to the procedures on

P. 4f5.

Preparations

The screen in step A appears when the Everio camera is turned on.

Display the “CREATE DVD” screen,

select “SELECT AND CREATE” and

press

CREATE DVD

CREATE TOGETHER

SELECT AND CREATE

CREATE DUPLICATE

PLAYBACK

SELECT AND CREATE

Select “CREATE BY DATE” and

press

SELECT AND CREATE

CREATE BY DATE

CREATE BY EVENT

CREATE BY PLAYLIST

SELECT FROM SCENES

CREATE DISC BY DATE

Select the desired dates and

press

CREATE BY DATE

OCT.12.2008

OCT.11.2008

TOTAL

00h18m

DVD1

QUIT

Select “ALL” and press

DVD CREATION LIST

ALL

DVD1

CHECK

QUIT

Select “EXECUTE” and press

ALL

READY TO CREATE

DVD-R

EXECUTE

RETURN

QUIT

The “CREATING NOW” screen

appears and copying starts

CREATING NOW

ELAPSED:

30%

3 min

To cancel, select “STOP” and press

Do not turn off the power or remove the

USB cable while the “CREATING NOW”

screen is displayed.

STOP

When “COMPLETED” appears,

press

to complete copying

COMPLETED

Copying by Event

z If the operation and display of your Everio camera differs from the following

procedures, refer to the instruction manual of your Everio camera.

z For some Everio cameras, still images cannot be copied.

Caution

Preparations

For details, refer to the instruction manual of the Everio camera.

Connect CU-VD3 to the Everio camera according to the procedures on

P. 4f5.

The screen in step A appears when the Everio camera is turned on.

Display the “CREATE DVD” screen,

select “SELECT AND CREATE” and

press

CREATE DVD

CREATE TOGETHER

SELECT AND CREATE

CREATE DUPLICATE

PLAYBACK

SELECT AND CREATE

Select “CREATE BY EVENT” and

press

SELECT AND CREATE

CREATE BY DATE

CREATE BY EVENT

CREATE BY PLAYLIST

SELECT FROM SCENES

CREATE DISC BY EVENT

Select the desired events and

press

SEARCH EVENT

SON 1

QUIT

Select “ALL” and press

DVD CREATION LIST

ALL

DVD1

DVD2

DVD3

CHECK

QUIT

Select “EXECUTE” and press

ALL

READY TO CREATE

DVD-R

EXECUTE

RETURN

QUIT

The “CREATING NOW” screen

appears and copying starts

CREATING NOW

ELAPSED:

30%

3 min

To cancel, select “STOP” and press

Do not turn off the power or remove the

USB cable while the “CREATING NOW”

screen is displayed.

STOP

When “COMPLETED” appears,

press

to complete copying

COMPLETED

Optional

Creating Data DVD from a PC

Important!

o The following optional accessories are required:

z Specialized USB cable (QAM1092-001)

• Please purchase from the JVC Accessory Store at:

http://www.jvc.com

http://www.jvc.ca

z Disc writing software (Power2Go)

• Please purchase from the CyberLink homepage.

http://www.cyberlink.com/oem/jvc/cds/enu/index_2.jsp

This burner can be used as a DVD burner by connecting it to a PC. Data DVD can be

created by using the disc writing software (sold separately).

Power cord

USB

Power supply outlet

CU-VD3

AC adapter

USB cable

Specialized USB cable

(sold separately)

¹ During connection, switch off the power supply of CU-VD3.

CU-VD3 is turned on by inserting the AC adapter into the power supply outlet.

Note

z The supplied USB extension cable cannot be used.

Troubleshooting

Trouble

Action

CU-VD3

z Make sure the AC adapter and power cord are connected

properly.

Cannot turn the power

on.

z This is not a malfunction.

z If the burner is abnormally hot, remove the AC adapter and

consult your authorized dealer.

The burner and AC

adapter is hot.

z A disc cannot be ejected by pressing the eject button if data

is being written to the disc. Wait until writing finishes.

z If a disc cannot be ejected with the eject button:

• Remove and insert the AC adapter, then press the eject

button again.

• If the disc cannot be ejected using the above method,

remove the AC adapter and all other connections. Insert a

thin rod of about 5 cm into the force eject hole located on

the right side of the eject button. The disc tray will be

ejected for about 1 cm, pull out the disc tray manually and

take out the disc.

Cannot open the disc

tray.

z Insert the disc with the label facing up.

z Make sure the disc tray is not dirty.

z Make sure the writing surface of the disc is not damaged.

z Make sure the special-shaped discs are not used.

z Make sure the audio CD complies with the CD-DA standard.

(Copy-control CDs cannot be played.)

Reading fails.

z For CD-R or CD-RW, make sure it is not recorded using the

packet-write method.

z Make sure an appropriate disc is being used. (A P. 4, 17)

z Use discs recommended for the burner. (A P. 4, 17)

z Make sure that a new disc is used for DVD-R.

z Insert the disc with the label facing up.

Writing fails.

z Make sure the disc tray is not dirty.

z Make sure the writing surface of the disc is not damaged.

z Make sure the special-shaped discs are not used.

z The time taken for writing may be longer depending on the

usage environment and conditions of usage. This is not a

malfunction. It is the performance of this burner.

The writing time is too

long.

Trouble

Everio

Action

z Make sure the USB cable is connected properly.

z Remove and insert the USB cable again.

z Remove and insert the AC adapter of CU-VD3.

Cannot be recognized

by the Everio camera.

z Turn off CU-VD3 and the Everio camera, and then turn on

again.

Problems occur

during operation.

Unable to play DVD

video created on this

burner on other DVD

players.

z Connect CU-VD3 to the Everio camera and play back using

the playback function of the Everio camera. (Refer to the

instruction manual of the Everio camera.)

It is impossible to dub

the DVD discs, which

were written with this

burner, on a HDD-DVD

recorder.

z Connect CU-VD3 to the Everio camera, play back using the

playback function of the camera, and dub the DVD discs

with the DVD recorder. (Refer to the instruction manual of

the Everio camera.)

Trouble

Action

z If the packet writing software, DLA (Direct Letter Access),

has been installed on the PC, the disc may not be played

back properly due to incompatibility.

In this case, consult the DLA software developer or check

out “DLA” related websites for solutions.

Cannot play back.

z Confirm the region code and change the region code of

CU-VD3.

z The DVD video created on this burner is region free (“ALL”).

z Follow the instructions on the PC screen to change the

region code.

Region code cannot

be changed.

(The code cannot be changed for some playback software.)

The region code of CU-VD3 can be changed up to 5 times.

The region code cannot be changed anymore as the code is

finalized after changing the fifth time.

Specifications

General

AC adapter (AP-V3U)

Rated current

0.9 A

AC110 V to 240 V

50 Hz/60 Hz

Power supply

141 x 23 x 166

(5-3/5" x 9/10" x 6-1/2")

Approx. 380 g (0.84 lbs)

(Excluding AC adapter and

USB extension cable)

Dimensions(mm)

(W x H x D)

Input capacity

Output

0.26 A

DC 5.2 V, 2 A

Weight

0 °C to 40 °C

(32 °F to 104 °F)

Operating

temperature

Operating temperature:

5 °C to 35 °C (41 °F to 95 °F)

Storing temperature:

-20 °C to 60 °C

49 x 28 x 79

(1-9/10" x 1-1/10" x 3-1/10")

(Excluding power cord)

Dimensions (mm)

(W x H x D)

Operating

environment

Weight

Approx. 136 g (0.3 lbs)

(-4 °F to 140 °F)

For DVD:

661 nm, 0.4 mW

For CD:

Laser power

(wavelength,

output)

785 nm, 0.6 mW

Recommended discs

JVC, TDK, Verbatim, SONY

JVC, Verbatim

JVC

*1 DVD-R DL discs can be used when the

burner is connected to a high definition

Everio camera or a PC.

DVD-R

DVD-R DL

DVD-RW

*2 Dual layer DVD-RW discs cannot be used.

z Optimal performance of the burner may not be possible depending on the disc used. Using discs

of manufacturers for which compatibility has been confirmed is recommended.

z Only 12 cm discs can be used with this burner.

When connected to an Everio camera

Interface

USB 2.0

Interface cable

USB extension cable

Compatible discs for Everio

writing

DVD-R, DVD-RW

High definition

DVD-R, DVD-R DL, DVD-RW

(8 cm discs cannot

be used)

Everio

DVD video (video only)

Recording format

Recording time

High definition

Everio

Data DVD (video, still image)

Everio

Approx. 30 minutes (including time taken for finalization)

z Approx. 90 minutes of video recorded in fine mode on a

4.7 GB disc. (Varies depending on conditions such as

number of titles.)

High definition

Everio

For details, refer to the instruction manual of the Everio

camera.

¹ Compatible with all 2006, 2007 and 2008 Everio G models excluding GZ-MG21 & GZ-MG31 for

direct burning without PC as of December 2007. Updated information is available at

www.jvc.com.

Memo

Printed in Malaysia

1207MNH-SW-VM

IBM Data Capture Board CLC CAPT PCASM User Manual
Intel 520 120 Gb 2 5" Internal Solid State Drive SSDSC2BW120A301 User Manual
Intel BX80605I7880 User Manual
JVC AV 28MS1SN User Manual
LOREX Technology SG19LD User Manual
Mabe Canada CLEAN MODELS SELF CLEAN SELF CLEAN JCBS280 User Manual
Palsonic 3430GM User Manual
Panasonic MICROCOMPUTER MN103S User Manual
Panasonic TC 51PM10Z User Manual
Philips 190VW8FB User Manual