COLOUR TELEVISION
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
Remote control buttons and basic functions .............................. 4
TV buttons and functions ........................................................... 6
Setting up your TV ..................................................................... 7
Basic setting for picture.............................................................. 9
Advanced setting for picture .....................................................11
Basic setting for sound............................................................. 12
Advanced setting for sound ..................................................... 13
Favorite channel and video setting .......................................... 14
Customized setting .................................................................. 15
TV channel presetting .............................................................. 17
Additional preparation .............................................................. 20
Troubleshooting ....................................................................... 22
Specifications ........................................................................... 23
AV-29V314
AV-29V334
AV-21C314
AV-21D314
AV-21W314
AV-21Y314
AV-21V314
AV-21V334
AV-25V314
AV-25V334
INSTRUCTIONS
GGT0051-001A-E
Knowing your TV’s features
Main features
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
AI ECO
TV detects the brightness of your room and automatically adjust the picture brightness to a
suitable level for a better eye care.
AI VOLUME
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden
change of the volume when selecting different TV channel.
VNR
You can reduce the picture noise when viewing noisy TV programmes or video sources.
WHITE BALANCE
You can choose one of three tones of white to match the video source such as movie,
sports, etc. Changing WHITE BALANCE affects the appearance of all other colours on the
screen.
5
CHILD LOCK
To prevent accidental operation by your child, you can disable the control buttons on the
TV.
Confirm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number. The
model number is indicated at the rear of your TV. When you press a button concerned to a function that is
not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is
not available for your TV, it is not displayed in the menu.
1
2
3
4
Model No.
No.
Function
*PICTURE BOOSTER
*ECO
–
–
–
–
_
–
–
_
–
–
–
_
–
_
–
_
_
_
_
_
_
_
_
_
_
–
_
–
*BASS
–
–
–
*CINEMA SURROUND
*SOUND TURBO
PICTURE TILT
COMPRESS (16:9)
_
_
_
_
_
_
–
_
_
–
_
_
–
–
–
_
–
_
–
–
–
_
_
_
–
–
_
3
Remote control buttons and basic functions
No. Press
POWER
MENU/OK
To
Turn on or off the TV from standby mode.
Display menu and confirm selected function.
5 / ∞ / 2 / 3 Select and adjust menu function.
CHANNEL -/+ Select the desired channel number.
VOLUME -/+ Adjust the volume level.
TV/VIDEO
MUTING
Select TV or video terminal input.
Turn off the volume.
Press this button again to resume the volume.
DISPLAY
Display the programme number or video terminal number and PR list (channel list) on the
screen.
You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list.
2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are
indicated with coloured mark.
0~9, -/--
Select the programme number. For two digits programme number, press -/--, then press the
number button.
+
RETURN
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
4
Remote control buttons and basic functions (continued)
How to operate menus and menus locations
Top menu
MENU INPUT
2nd menu
EXT. INPUT
DISPLAY
PICTURE MODE
PICTURE SETTING P.10
WHITE BALANCE P.10
Location 3rd menu
Location
P.16
P.16
P.9
–
–
–
–
–
–
To
Operation
Note
–
–
–
–
Display the MENU Press the MENU/OK button
.
To exit the MENU,
press the DISPLAY
PICTURE
*If you want to
adjust PICTURE
SETTING menu,
you must set
button
EXIT menu.
to choose a Press ∞ button
menu title. Then press MENU/OK display the next page
or choose
PICTURE
–
VNR
P.15
Display the top
menu
Press 5/∞ buttons
to
FEATURES
FAVORITE CH SETTING P.14
VIDEO SETTING P.14
COLOUR SYSTEM P.9
PICTURE BOOSTER P.10
COMPRESS (16:9) P.11
PICTURE MODE
menu to USER.
button
Press 5/∞ buttons
menu title. Then press MENU/OK
button
Press 5/∞ buttons
menu title. Then press MENU/OK
button
Press the DISPLAY button
.
for more functions.
Display the 2nd
menu
to choose a
.
PICTURE TILT
P.11
Display the 3rd
menu
to choose a
SOUND
*If you want to
adjust
EQUALIZER
menu, you must
set SOUND
MODE menu to
USER.
AI VOLUME
SOUND MODE
EQUALIZER
BALANCE
SOUND TURBO
CINEMA SURROUND P.13
SUPER BASS
OFF TIMER
CHILD LOCK
AI ECO SENSOR P.11
AUTO PROGRAM P.17
P.13
P.12
P.13
P.12
P.12
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
.
Return to the
previous menu
.
–
Choose the setting Press 5/∞ buttons
to choose Press the MENU/OK
of a function
a function. Then press the 2/3
button
to exit from
P.12
P.15
P.15
buttons
to change the setting. the menu.
FEATURES
Adjust the effect
level of a function
Press 5/∞ buttons
a function. Then press the 2/3
to choose
–
–
–
–
–
–
buttons
to adjust the effect
Press the 5/∞ buttons to
INSTALL
level.
EDIT/MANUAL
P.17
DELETE, MOVE,
MANUAL,INSERT P.18
P.17-
Display the sub
menu of a function. choose a function. Then press
–
LANGUAGE
BLUE BACK
AUTO SHUTOFF
VIDEO-2 SETTING P.16
AI ECO DISPLAY P.11
P.15
P.11
P.16
LANGUAGE
P.15
MENU/OK buttons
the sub menu.
to display
–
–
–
–
–
–
–
–
–
–
The following chart shows locations of functions in menus. In this manual,
location of a function is described as follows:
2nd menu
2nd menu
MENU
MENU
Top menu
Top menu
EXIT
–
–
3rd menu
Note: Some functions have the 4th menus as the sub-menus.
5
TV buttons and functions
The illustrations shown below is for AV-29V334 and
AV-21C314 series only, which are used for explanation
purpose.
No. Button/terminal Description
Page
–
–
L (main power) Press to turn on or turn off the TV’s main power.
POWER lamp
Indicate the TV is being turned on or off.
No colour: TV’s main power is being turned off.
Your TV may not look exactly the same as illustrated.
Red:
TV’s main power is being turned on.
Front of the TV
Note: When you turn off the power switch while TV is in standby
mode, the light of power lamp will be off in 10 -15 seconds.
AV-29V334
ECO sensor
–
–
–
–
–
!
9
8
7
6
5
43
2
1
Remote control sensor
TV/ VIDEO
VOLUME -/+
CHANNEL -/+
MENU
Press to select TV or video mode.
Press to adjust the volume level.
Press to select the desired channel.
Press to display the menu.
POWER
V
L/MONO
R
MENU
OK
CHANNEL
VOLUME TV/VIDEO
EXIT
IN (VIDEO-3)
–
IN (VIDEO-3)
Video and audio input jacks for VIDEO-3 mode.
Headphone jack.
Aerial socket.
20
20
7
AV-21C314
!
9
8
7
6
4
2
1
OUTPUT
Video and audio output jacks. (The component video
signal cannot be output.)
MENU
CHANNEL
VOLUME
POWER
20
20
V
L
/
MONO
IN (VIDEO-2)
R
OK
COMPONENT
Video or component video, and audio input jacks for
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting
the “VIDEO-2 SETTING” function (see page 16).
VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1
mode
BASS SPEAKER Twin Port Bass Blaster Unit output terminal.
OUT
7
21
AV-21C314
AV-29V334
COMPONENT
(VIDEO-2)
VIDEO-1
INPUT
VIDEO-1
OUTPUT
OUTPUT
INPUT
INPUT
S
How to operate the menus with the TV button
Work as same as the button on the
OVER
V
TV button
Note
V
L
Y
V
L
V
L
remote control unit
/
V
BASS
SPEAKER
OUT
L
L
/
MONO
C
B
MENU
MENU/OK button
To display main menu and exit
menu after finish setting.
/
MONO
/
MONO
CR
R
R
R
R
R
CHANNEL -/+ ∞/5 button
To select menu function.
VOLUME -/+ 2/3 button
To adjust the desired function.
#
"
#
"
%
$
& %
6
Setting up your TV
CAUTION
Rear of TV
•
Turn off the equipment including the TV before connecting.
COMPONENT
(VIDEO-2)
INPUT
VIDEO-1
INPUT
OUTPUT
S
1 Connecting the aerial cable.
(1)
OVER
V
VHF/UHF outdoor aerial
V
L
Y
/
V
L
L
/
C
C
B
/
MONO
MONO
To video
output
To audio
output
To RF
output
Matching aerial
adapter (supplied)
(2)
R
R
R
R
To S-video
output
VCR
To aerial input
The illustration shown is just a sample. It may not be same as your TV.
(3)
75-ohm coaxial cable (not supplied)
2 Connecting the compatible main plug to the AC
outlet.
Indoor aerial
Matching
aerial
Rod aerial
3 Inserting batteries into the remote control.
Insert two batteries by following the + and -
polarities and inserting the - end first.
CAUTION:
adapter
Aerial holder
(supplied)
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• It the remote control does not work properly, fit new
batteries. The supplied batteries are for testing, not regular use.
Rear of AV-21V314
4 Turn on the TV by pressing the main
power button.
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with the aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable (or S-VIDEO cable if available) and audio
cables. For details, see the manual of your VCR.
JVC logo appears on the screen.
7
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following setps as below:
LANGUAGE
ENGLISH
AUTO PROGRAM
AUTO PROGRAM
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
SETUP TOUR RESTART?
CH 12
22%
9
I
3
.
OK
I
RESTART
NO
10
11
12
13
BACK
I
IINSERT
IDELETE
IMANUAL
BACK
I
OK
OK MOVE
OK
.
• Press 5/∞ button to
select your desired
language, then press
MENU/OK button.
• TV will start searching
for the channels.
• Press the red button to
cancel the SETUP TOUR
RESTART function.
If you want to make initial
settings again when the
next time you turn on the
TV, press the MENU/OK
button to activate the
SETUP TOUR RESTART
function.
• To complete the initial
setting, press the
MENU/OK button. To
edit the channel list,
see page 17.
To stop AUTO
PROGRAM, press
MENU/OK button.
If the JVC logo does not appear, use LANGUAGE, and AUTO PROGRAM functions to make the initial settings. Those functions are
located in the INSTALL menu.
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
8
Basic setting for picture
COLOUR SYSTEM
PICTURE MODE
You can select the appropriate colour system when the picture is
not clear or no colour appears.
You can choose the desired picture setting with one-touch.
Press the PICTURE MODE button to select a setting.
Press the COLOUR SYSTEM button to select a setting.
SOFT
Softens contrast and sharpness.
BRIGHT
STANDARD
USER
Heightens contrast and sharpness.
Standard picture setting.
You can change this picture setting as you like.
Select USER and adjust following items in the
PICTURE SETTING menu. (CONTRAST, BRIGHT,
SHARP, COLOUR, TINT*)
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE FEATURES menu
*TINT can only be adjusted in NTSC system.
COLOUR SYSTEM
To operate this function with a menu:
For the colour system in each country or region, see the table
below:
❇
MENU
PICTURE menu
PICTURE MODE
To return the USER setting to the default, press the blue button
when the PICTURE SETTING menu appears.
Area
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
System
Yemen, etc.
PAL
Indonesia, Malaysia, Singapore, Thailand, India, etc.
China, Vietnam, etc.
Hong Kong, etc.
❇ About the basic operations of the menu, please see the “How
Asia, Middle
East
PAL
PAL
to operate menus and menus locations” on page 5.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
NTSC
SECAM
PAL
PAL
PAL
Europe
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
PAL
Egypt, Morocco, etc.
SECAM
9
Basic setting for picture (continued)
Adjusting the picture – USER
WHITE BALANCE
You can adjust the desired picture setting when selecting USER
in PICTURE MODE.
You can change the white balance of the picture to better match
the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose
the desired setting.
1 Select the USER in PICTURE MODE under PICTURE menu.
❇
PICTURE menu
PICTURE MODE
MENU
USER
❇
PICTURE menu
MENU
WHITE BALANCE
2 Select the PICTURE SETTING in PICTURE menu, then adjust
NORMAL
COOL
WARM
Normal white balance.
Bluish white.
Reddish white.
the setting.
❇
PICTURE menu
PICTURE SETTING
MENU
CONTRAST
BRIGHT
SHARP
COLOUR
TINT*
2 : Lower contrast
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
*TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due
to the low signal reception.
Press the PICTURE BOOSTER button to select the desired
mode.
HIGH
LOW
OFF
Perform at maximum level.
Perform at minimum level.
Cancel the function
To operate this function with a menu:
❇
PICTURE menu
MENU
PICTURE FEATURES menu
PICTURE BOOSTER
10
Advanced setting for picture
2 Press the 5/∞ buttons until the picture become level. Then
AI ECO SENSOR (ECO)
You can adjust TV screen contrast according to the brightness of
your room.
press the MENU/OK button.
Press the ECO button to select the desired mode.
COMPRESS (16:9)
1
2
Mild contrast (recommended).
Even contrast.
You can convert a normal picture (4:3 aspect ratio) into a wide
picture (16:9 aspect ratio).
OFF
Cancel the function.
Select the COMPRESS (16:9) in the PICTURE FEATURES menu
under PICTURE menu, then choose ON or OFF.
❇
To operate this function with a menu:
❇
FEATURES menu
MENU
AI ECO SENSOR
PICTURE menu
MENU
PICTURE FEATURES menu
You can display the graphic of AI ECO SENSOR on the screen.
Select the AI ECO DISPLAY in the INSTALL menu, then choose
COMPRESS (16:9)
ON or OFF.
❇
MENU
INSTALL menu
AI ECO DISPLAY
BLUE BACK
You can set the TV to automatically change to a blue screen and
mute the sound if the signal is weak or absent, or when there is
no input from an antenna.
Correcting the Slanting Picture (PICTURE TILT)
You can correct the picture tilt caused by the earth’s magnetic force.
1 Select the PICTURE TILT in the PICTURE FEATURES menu
Select the BLUE BACK in the INSTALL menu, then choose ON or
under PICTURE menu, then press MENU/OK button.
OFF.
❇
PICTURE menu
MENU
PICTURE FEATURES menu
❇
MENU
INSTALL menu
BLUE BACK
PICTURE TILT
If you wish to continue viewing the poor picture, cancel the BLUE
BACK function.
The following display appears.
PICTURE TILT
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
BACK
I
OK
.
11
Basic setting for sound
SOUND MODE
SOUND SYSTEM
You can select an appropriate sound system when abnormal
sound occurs even when the picture appears normally.
Press the SOUND SYSTEM button to select a setting.
You can choose the desired sound setting.
Select the SOUND MODE in SOUND menu, then choose the
setting.
❇
MENU
SOUND menu
B/G
I
D/K
M
SOUND MODE
USER
You can change this sound setting as you like.
Select USER and adjust the frequencies in EQUALIZER
(100, 300, 1K, 3K, 8K Hz).
This function is not available in video mode.
For the sound system in each country or region, see the table below:
Area
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
System
For details, see “EQUALIZER” on page 13.
Emphasize on both vocal sound and music.
Emphasize on music effect.
DYNAMIC
MUSIC
Yemen, etc.
B/G
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
D/K
I
NEWS
Emphasize on vocal sound.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G
BALANCE
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
M
D/K
D/K
B/G
I
You can adjust the volume balance between the left and right
speakers.
Select the BALANCE in SOUND menu, then adjust the setting.
Europe
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
B/G
I
B/G
B/G
❇
MENU
SOUND menu
BALANCE
Egypt, Morocco, etc.
SOUND TURBO
You can enjoy the emphatic low and high frequency levels.
SUPER BASS (BASS)
Press the SOUND TURBO to select ON or OFF.
To operate this function with a menu:
You can enjoy powerful bass sound with the Twin Port Bass
Blaster unit.
❇
MENU
SOUND menu
SOUND TURBO
Press the BASS button to select ON or OFF.
To operate this function with a menu:
❇ About the basic operations of the menu, please see the “How
❇
SOUND menu
MENU
SUPER BASS
to operate menus and menus locations” on page 5.
For attaching the Twin Port Bass Blaster unit, please see in page
21.
12
Advanced setting for sound
CINEMA SURROUND
EQUALIZER
You can enjoy an enhanced sound for wider audience.
Press the CINEMA SURROUND button to select a setting.
You can adjust the sound level of each frequencies when selecting
USER mode in SOUND MODE.
OFF
Cancel the function.
1 Select the USER in SOUND MODE under SOUND menu.
❇
LOW
HIGH
MONO
Listen to sound with less wider audience effect.
Listen to sound with more wider audience effect.
Listen to mono sound with stereo effect.
SOUND menu
MENU
SOUND MODE
USER
2 Select the EQUALIZER in SOUND menu.
❇
MENU
SOUND menu
EQUALIZER
To operate this function with a menu:
The following display appears.
❇
SOUND menu
MENU
CINEMA SURROUND
EQUALIZER
If slight volume distortion occurs when you select HIGH mode,
change the setting to LOW mode. The CINEMA SURROUND
effect will be less noticeable.
100 300
1K
3K
8K Hz
If you use CINEMA SURROUND and SOUND TURBO together,
volume distortion might occurs.
BACK
I
OK
.
3 Select and adjust the desired frequencies.
4 Press the MENU/OK button to exit the menu.
Adjust high frequency will affect higher pitch sound and vice versa.
AI VOLUME
You can adjust the volume of all the channels and video inputs to
the same level automatically.
Select the AI VOLUME in SOUND menu, then choose ON or OFF.
❇
SOUND menu
MENU
AI VOLUME
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
13
Favorite channel and video setting
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
To register the favorite channel
You can register and recall 4 favorite channels by using the
colour buttons (red, green, yellow, blue).
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
1 In TV mode, select a TV channel (PR01-99) you desired to register.
5 Press the MENU/OK button to exit the menu.
2 Press and hold a colour button for 3 seconds or more.
“FAVORITE CHANNEL I PROGRAMMED!” appears on the
screen and current channel is registered.
To adjust the video setting (VIDEO SETTING)
You can adjust the picture and sound settings for video inputs.
3 To register other favorite channels, repeat Step 1 to 2.
To recall the favorite channel, press the colour button.
When the TV is in menu mode, favorite channel function is not
available.
1 Display the PICTURE menu and select VIDEO SETTING in
PICTURE FEATURES menu.
❇
MENU
PICTURE menu
PICTURE FEATURES menu
VIDEO SETTING
To adjust favorite channel setting
(FAVORITE CH SETTING)
2 Select VIDEO STATUS in VIDEO SETTING menu, then
choose the desired video input.
❇
VIDEO SETTING
VIDEO STATUS
You can adjust the picture and sound settings for the favorite channels.
1 Display the PICTURE menu and select FAVORITE CH
SETTING in PICTURE FEATURES menu.
VIDEO SETTING
3 Select EFFECT, then press 2/3 button
to choose ON.
VIDEO STATUS
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
VIDEO-1
❇
MENU
PICTURE menu
PICTURE FEATURES menu
To cancel the settings, choose OFF.
FAVORITE CH SETTING
SOUND MODE
EFFECT
USER
ON
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING
menu, then choose the desired favorite channel.
BACK
I
IRESET
OK
❇
FAVORITE CH SETTING
FAVORITE CHANNEL
.
FAVORITE CH SETTING
3 Select EFFECT, then press 2/3 button
to choose ON.
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
FAVORITE CHANNEL
CONTRAST
BRIGHT
I
PR 01
To cancel the settings, choose OFF.
SHARP
COLOUR
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
TINT
SOUND MODE
EFFECT
5 Press the MENU/OK button to exit the menu.
USER
ON
BACK
I
❇ About the basic operations of the menu, please see the “How
OK
to operate menus and menus locations” on page 5.
.
14
Customized setting
VNR
CHILD LOCK
You can reduce the noise.
You can disable the front control buttons of the TV.
Select the VNR in the PICTURE FEATURES menu under
Select the CHILD LOCK in the FEATURES menu, then choose
PICTURE menu, then choose a setting of VNR function.
ON or OFF.
❇
❇
PICTURE menu
FEATURES menu
MENU
PICTURE FEATURES menu
MENU
CHILD LOCK
VNR
OFF TIMER
OFF
VNR is turned off.
You can set the TV to turn off automatically to standby mode after
a set time.
Press the OFF TIMER button to select a desired period of time.
AUTO
MIN
MAX
Effect of VNR is automatically controlled.
Effect of VNR becomes minimum level.
Effect of VNR becomes maximum level.
OFF TIMER
If you select MAX, the picture becomes softer even if the original
picture is sharp.
0
120
You can set the period of time
to a maximum of 120 minutes
in 10 minutes step.
10
LANGUAGE
You can choose your desired on screen display language.
BACK
I
Select the LANGUAGE in the INSTALL menu, then choose a
OK
language.
.
❇
To operate this function with a menu:
INSTALL menu
MENU
LANGUAGE
❇
FEATURES menu
MENU
OFF TIMER
When the elapsed of time left one minute, “GOOD NIGHT!”
appears on the screen.
You can display the OFF TIMER menu again to confirm or
change the remaining time.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
15
Customized setting (continued)
EXT. INPUT (TV/VIDEO)
AUTO SHUTOFF
You can select TV or video terminal input with one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
❇
You can set the TV to turn off automatically when no signal is
received for about 15 minutes or longer after the end of a
broadcast.
Select AUTO SHUTOFF in INSTALL menu, then choose ON or
INPUT menu
MENU
EXT. INPUT
OFF.
❇
MENU
INSTALL menu
AUTO SHUTOFF
DISPLAY
The AUTO SHUTOFF function does not turn off the TV’s main
power.
The AUTO SHUTOFF function is not available in video mode.
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
ON
OFF
PR LIST
VIDEO-2 SETTING
Choose a TV channel or a VIDEO terminal.
1 Press the DISPLAY button to display the PR LIST.
2 Select a programme number or video terminal by pressing the
5/∞ button to move up/down on the programme number or
press the 2/3 button to skip for each 7 programme numbers,
You can set the VIDEO-2 SETTING according to the video signal
output from the external devices connected to the VIDEO-2
terminal.
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting.
❇
MENU
INSTALL menu
VIDEO-2 SETTING
then press MENU/OK button.
PR LIST
VIDEO
If a normal video signal (composite video signal) is
input.
PR
AV
1
2
3
4
5
6
CH/CC
I
I
I
I
CH 03
CH 05
CH 07
CH 09
CC 04
CC 05
B
R
COMPONENT
If a component video signal (Y/C /C ) is input.
For connecting methods, see “Additional Preparation” on page
20.
.
-7 OK +7
❇ About the basic operations of the menu, please see the “How
.
To operate this function with a menu:
to operate menus and menus locations” on page 5.
❇
INPUT menu
MENU
DISPLAY
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
16
TV channel presetting
2 Choose EDIT/MANUAL, then press the MENU/OK button.
To register the TV channels automatically
EDIT menu appears.
You can register the TV channels into the TV’s channel list
automatically.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
1 Display the INSTALL menu.
❇
INSTALL menu
MENU
9
I
3
10
11
12
13
2 Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR list) automatically.
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
3 “SETUP TOUR RESTART?” appears.
.
To start the SETUP
TOUR
To skip the SETUP
TOUR
Press the MENU/OK button. Then proceed to
step 5 of “Setting up your TV” on page 8.
Press the Red button.
3 Choose the channel which you want to register.
4 Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the
CH/CC number.
5 Press the 3 button to choose an appropriate sound system.
For details, see “SOUND SYSTEM” on page 12.
4 The EDIT menu appears.
To edit the channel
list
Proceed to the Step 3 of “To edit the channel
list (PR LIST)” on page 18.
6 Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7 Repeat step 5 until your desired TV channel appears
If a channel is not
registered
To exit the menu
Proceed to the Step 3 of “To register the
TV channels manually” on this page.
Press the MENU/OK button.
For details of “SETUP TOUR”, see page 8.
If the reception is poor Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s channel list manually.
8 Press the MENU/OK button to exit the menu.
1 Display the INSTALL menu.
❇ About the basic operations of the menu, please see the “How
❇
INSTALL menu
MENU
to operate menus and menus locations” on page 5.
17
TV channel presetting (continued)
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
To add in the new channel
(INSERT in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR numbers will be
changed.
You can add in the new channel in the TV channel list as you like.
You need to find the “CH/CC” number for the TV channel. Find the
“CH/CC” number corresponding to the channel number of the TV
channel from the attached sheet “CH/CC number list” on page 19.
1 Display the INSTALL menu.
❇
1 Display the INSTALL menu.
INSTALL menu
MENU
❇
INSTALL menu
MENU
2 Choose EDIT/MANUAL, then press the MENU/OK button.
2 Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
EDIT menu appears.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
3 Choose the PR number for which you will register a new TV
channel. When you add a new TV channel of NTSC-M system,
press the SOUND SYSTEM button to change the sound
system to M. Then proceed to the next step.
9
I
3
10
11
12
13
4 Press the green button, then press 5/∞ buttons to choose
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
“CC” or “CH”.
.
5 Press the number button to enter the remaining CH/CC
number.
3 Choose the channel which you want to change PR number, or
delete.
The TV starts to search the TV channel, and the picture of the
TV channel appears. If the TV finds no TV channel, a noisy
picture appears.
4 Do the following action:
To change the PR
number (MOVE)
Press the 3 button. Then move it to the PR
number you want to use it for the channel.
Finally press the 2 button.
When a TV channel has already been registered in PR99, using
the INSERT function deletes that TV channel.
To delete the
Press the yellow button.
channel (DELETE)
❇ About the basic operations of the menu, please see the “How
5 Press the MENU/OK button to exit the menu.
to operate menus and menus locations” on page 5.
18
TV channel presetting (continued)
CH
US
CCIR
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
OIRT
AUSTRALIA
CC
US
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
CCIR
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
OIRT
AUSTRALIA
CH/CC number
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
When you want to use the INSERT
function on page 18, find the CH/CC
number corresponding to the channel
number of the TV channel from this table.
Channel No. Country
US
CCIR
United States, Philippines, etc..
Middle East, Southeast Asia,
etc..
U
V
W
OIRT
Eastern Europe, Russia,
Vietnam, etc..
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
AUSTRALIA
Channel
Australia, etc..
CH
US
CCIR
E2
OIRT
R1
AUSTRALIA
AU-0
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
US-2
US-3
US-4
US-5
US-6
US-7
US-8
US-9
US-10
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
R2
R6
R7
R8
R9
R10
R11
R12
AU-10
AU-11
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
CC
US
CCIR
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
OIRT
AUSTRALIA
AU-5
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
AU-5A
X
Y
Z
Z+1
Z+2
S-9
R3
R4
R5
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
AU-3
AU-4
A-5
A-4
A-3
A-2
A-1
A
B
C
D
19
Additional preparation
The illustrations shown in this section are for AV-29V334 and AV-
21C314 only, which are used for explanation purpose. Your TV
may not look exactly the same as illustrated.
Connecting to rear component/video input
terminal and output terminal
Rear of TV
AV-29V334
Before connecting
VCR (for playing)
DVD player (composite signals)
COMPONENT
VIDEO-1
•
Read the manuals provided with the devices for the proper
(VIDEO-2)
INPUT
OUTPUT
INPUT
connection.
S
•
•
Turn off all the devices including the TV.
Note that connecting cables are not supplied.
.
VCR (for recording)
OVER
V
V
L
Y
/
V
BASS
SPEAKER
OUT
L
L
CB
/
/
MONO
MONO
DVD player
(component video signals)
Connecting to front video input terminal
CR
R
R
R
AV-29V334
Front of TV
Rear of TV
Camcorder or TV game
AV-21C314
VIDEO-1
INPUT
R
V
L/MONO
MENU
OK
OUTPUT
IN (VIDEO-3)
VCR (for playing)
Headphones
AV-21C314
V
L
V
L
MENU
V
L
/
MONO
R
IN (VIDEO-2)
/
OK
MONO
VCR (for recording)
R
R
When you use VIDEO-1 INPUT, you should choose to connect
S-VIDEO or video input. If S-VIDEO connector and video input
are connected at the same time, no picture displays on the
screen and the message “PLEASE DISCONNECT VIDEO-1
CABLE!” appears. In this case, you should disconnect either S-
VIDEO or video input.
When connecting to COMPONENT (VIDEO-2) input, depending
on the connection, choose the appropriate video input using the
menu (see page 16).
20
Additional preparation (continued)
CAUTION:
Attaching the Twin Port Bass Blaster Unit
The Twin Port Bass Blaster Unit is just placed on top of the TV
and is not held in place by a screw. When using the unit, pay
attention to the following cautions. Otherwise, the unit or TV may
fall over and be damaged, or cause unexpected injury.
• Do not rest your hands or elbows on the Twin Port Bass
Blaster Unit.
• Do not move the TV with the Twin Port Blaster Unit mounted
on top of the TV. Before you move the TV, be sure to remove
the unit.
<AV-29V334/AV-25V334/AV-21V334 only>
The Twin Port Bass Blaster Unit is packaged together with the TV.
Before you use the TV, mount the Twin Port Bass Blaster unit
correctly on the TV.
•
The SUPER BASS (BASS) function do not work unless the
Twin Port Bass Blaster Unit is connected correctly to the TV.
For details on the SUPER BASS (BASS) function, see page
12.
• Do not move the TV by holding the Twin Port Bass Blaster
Unit.
1 Place the unit on top of the TV making sure that the mounting
pin on the bottom of the unit fits into the mounting hole on the
top of the TV.
2 Firmly insert the Twin Port Bass Blaster Unit connector into
•
When you mount the unit, make sure that the mounting pin
fits properly into the mounting hole. Otherwise, it may slide
off the top of the TV. This may cause damage or cause
unexpected injury.
the BASS SPEAKER OUT terminal.
COMPONENT
VIDEO-1
(
)
VIDEO-2
INPUT
OUTPUT
INPUT
Twin Port
Bass Blaster
Unit
S
OVER
V
Y
C
V
L
/V
B
BASS
SPEAKER
OUT
L
L
/MONO
/ MONO
R
C
R
R
R
21
Troubleshooting
If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.
• Cannot operate the
remote control
• The batteries may be exhausted. Replace with
new batteries (see page 7).
• Ensure that you are operating the remote less
than seven meters from the front of your TV.
• No picture,
no sound
• Deactivate the BLUE BACK function if it is turned
on.
• Choose the appropriate sound system. Refer to
“SOUND SYSTEM” on page 12.
• Cannot operate the
menus
• Press TV/VIDEO button to return to TV mode and
try operating the menus.
• Cannot operate the
front control buttons
• Deactivate the CHILD LOCK function if it is turned
on (see page 15).
• Snowy picture
• Check the aerial cable and its connection with the
TV.
• TV is turned off
suddenly
• This may due to the AUTO SHUT OFF function is
activated. Press the POWER button to turn on the
TV.
• Stripes appear on • Interference occurs caused by other devices such
the picture
as an amplifier, personal computer, or a hair drier.
Move such devices away from your TV.
• Colour patches
appear at the corner
of the screen
• This may due to the magnetized device such as a
speaker near to your TV. Keep the device apart
from your TV. Alternately, you can also use the
magnetic-shielded speaker.
• Double-pictures
(ghosting) occur
• Interference occurs caused by signal reflecting
from mountains or building. Try to adjust the
aerial’s direction or use a better directionality
antenna.
• Picture is tilted
• This may due to the earth magnetism. Refer to
“PICTURE TILT” on page 11 to correct the tilt.
• Poor picture
• Choose the appropriate colour system. Refer to
“COLOUR SYSTEM” on page 9.
• Adjust the COLOUR or BRIGHT setting. Refer to
“Adjusting the picture - USER” on page 10.
• Image takes a short
period to be
displayed
• Image required time to stabilize before display.
This is not a malfunction.
• White and bright still • Inevitable phenomenon due to the nature of the
image look as if it
were coloured
• TV may emitted
crackling sound
• This is due to a sudden change in temperature
and it is not a malfunction. If the crackling sound
is too frequent, request your service technician for
inspection.
picture tube. This is not a malfunction.
• Top of the image
from software
products or video
tape is distorted
• This is due to the condition of the video signal
whereby the image was not recorded properly.
This is not a malfunction.
• Feel a slight electric
shock when
touching the TV
screen
• This is due to the static electricity of the picture
tube and it will not harm the human body. This is
not a malfunction.
• Poor sound
• Adjust the sound frequency properly. Refer to
“EQUALIZER” on page 13.
22
Specifications
Model
AV-29V334
AV-29V314
AV-25V334
AV-25V314
AV-21V334
TV RF system
Colour system
Channel and Frequencies
B/G, I, D/K, M
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
VHF low channel (VL) : 46.25 to 168.25 MHz
VHF high channel (VH) : 175.25 to 463.25 MHz
UHF channel (U) : 471.25 to 863.25 MHz
*
Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)
Power input
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
Power consumption
MAX: 215 W
AVG: 130 W
MAX: 166 W
AVG: 109 W
MAX: 173 W
AVG: 110 W
MAX: 151 W
AVG: 102 W
MAX: 143 W
AVG: 91 W
Screen size
(Measured diagonally)
Picture tube: 727.4 mm Picture tube: 727.4 mm Picture tube: 649.0 mm Picture tube: 649.0 mm Picture tube: 546.9 mm
Visible area: 676.0 mm Visible area: 676.0 mm Visible area: 597.0 mm Visible area: 597.0 mm Visible area: 508.0 mm
Audio output
(Rated power output)
Speakers
7 W + 7 W + 13 W
10 W + 10 W
7 W + 7 W + 13 W
7 W + 7 W + 13 W
7 W + 7 W
(6.5 x 13) cm X 2 +
(Ø 13) cm X 1
(6.5 x 13) cm X 2 +
(Ø 13) cm X 2
(6.5 x 13) cm X 2 +
(Ø 13) cm X 1
(6.5 x 13) cm X 2
(6.5 x 13) cm X 2
External input/output
VIDEO-1: S-VIDEO input, VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input
VIDEO-3: VIDEO input, AUDIO L/R input
OUTPUT: VIDEO output, AUDIO L/R output
Headphone jack: Stereo mini jack (3.5 mm diameter)
Dimension (W x H x D)
Weight
812 X 584.2 X 520.5 mm 812 X 584.2 X 520.5 mm 728 X 549 X 481.5 mm
728 X 536 X 481.5 mm
649 X 478 X 473.5 mm
41 kg
41 kg
35 kg
33 kg
26.5 kg
Accessories
• Remote control unit: RM-C1281 X 1
• AA/R6/UM-3 dry cell battery X 2
• Matching aerial adapter X 1
Design and specifications subject to change without notice.
23
Specifications (continued)
Model
AV-21V314
AV-21C314
AV-21W314
AV-21D314
AV-21Y314
TV RF system
Colour system
Channel and Frequencies
B/G, I, D/K, M
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
VHF low channel (VL) : 46.25 to 168.25 MHz
VHF high channel (VH) : 175.25 to 463.25 MHz
UHF channel (U) : 471.25 to 863.25 MHz
*
Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)
Power input
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
Power consumption
MAX: 121 W
AVG: 81 W
MAX: 88 W
AVG: 65 W
MAX: 121 W
AVG: 81 W
MAX: 91 W
AVG: 65 W
MAX: 91 W
AVG: 65 W
Screen size
(Measured diagonally)
Picture tube: 546.9 mm Picture tube: 547.5 mm Picture tube: 546.9 mm Picture tube: 548.1 mm Picture tube: 548.1 mm
Visible area: 508.0 mm Visible area: 505.0 mm Visible area: 508.0 mm Visible area: 508.0 mm Visible area: 508.0 mm
Audio output
(Rated power output)
Speakers
7 W + 7 W
3 W + 3 W
7 W + 7 W
3 W + 3 W
(5 x 12) cm X 2 (6 x 12) cm X 2
(6.5 x 13) cm X 2
(6.5 x 13) cm X 2
(5 x 9) cm X 2
External input/output
VIDEO-1: S-VIDEO input*, VIDEO input, AUDIO L/R input (*Except AV-21D314/AV-21Y314/AV-21C314)
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO** (Y/CB/CR) input
VIDEO-3**: VIDEO input, AUDIO L/R input (**Except AV-21Y314/AV-21C314)
OUTPUT: VIDEO output, AUDIO L/R output
Headphone jack: Stereo mini jack (3.5 mm diameter)
Dimension (W x H x D)
Weight
649 X 465.5 X 473.5 mm 502 X 476.5 X 471.6 mm 649 X 465.5 X 471.5 mm
598 X 468 X 478 mm
649 X 470.5 X 477.5 mm
24 kg
22 kg
24 kg
25 kg
20 kg
Accessories
• Remote control unit: RM-C1281 X 1
• AA/R6/UM-3 dry cell battery X 2
• Matching aerial adapter X 1
• Rod aerial X 1
Design and specifications subject to change without notice.
VICTOR COMPANY OF JAPAN, LIMITED
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
0604-FLE-JMT
|