ENGLISH
COLOUR TELEVISION
INSTRUCTIONS
AV-29Q317B AV-21Q317B
AV-29RXP8 AV-21R318
AV-29S357
AV-21RXP8
AV-21S357
This illustration shows AV-29S357.
The illustrations of AV-29S357 is used in this instruction manual for explanation
purpose. Your TV may not look exactly the same as illustrated.
GGT0158-001B-E
Knowing your TV’s features
Contents
Please see the chart below and check the function are equipped for your TV's model number.
The model number is indicated at the rear of your TV. When you press a button concerned to a function
that is not available for your TV, it does not work and the logo "Ø" appears on the screen.
Knowing your TV’s features...................3
Connections ..........................................4
Initial settings.........................................5
Remote control buttons and basic
functions................................................6
TV buttons and functions.......................7
Operating the menus.............................7
Model No.
Function
•
•
•
•
–
–
•
•
•
•
–
•
•
–
•
•
–
•
•
–
•
PIP control buttons (Green label)
PICTURE TILT
–
•
–
–
–
–
•
–
–
•
MaxxBass
–
–
•
•
•
AI ECO SENSOR
ECO MODE
–
•
–
–
•
•
PICTURE BOOSTER
Picture setting........................................9
Picture in picture (PIP) operation ........11
Sound setting ......................................11
Customized setting..............................13
TV channel presetting .........................15
Features
Descriptions
DVD MENU
Just connect DVD player to the television. The television will detect DVD signal and
display picture on the screen automatically and you can adjust pictures and sound while
you are watching DVD as your desire. When disconnect DVD player, the television will
display the previous channel.
MaxxBass
MaxxBass enhances bass sound that cannot be reproduced by normal speakers to be
heard by our ears.
PIP (Picture in Picture)
FAVORITE CH (Channel)
AI ECO SENSOR
You can view two screens (Main picture and Sub picture) at the same time.
You can register up to four favorite channels for quick recall with one press.
TV detects the brightness of your room and automatically adjust the picture brightness to
a suitable level for a better eyecare.
Troubleshooting...................................17
Specifications ......................................18
ECO MODE
AI VOLUME
TINT
You can adjust TV screen contrast according to the brightness of your room to suitable
level for a better eyecare.
TV adjusts the volume automatically for all TV channels to avoid sudden change of the
volume when selecting different TV channels or selecting Video Mode.
You can adjust TINT setting for all colour systems, including PAL.
Note : Some functions written in this instruction manual may not be available for your TV.
3
Connections
The illustration of AV-29S357 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated.
CAUTION
Ensure to turn off all equipments including the TV before connecting the AC mains plug to the AC outlet.
Connecting to the rear component/video
input terminal and output terminal
Connecting to the aerial cable and VCR
VHF/UHF
outdoor
aerial
TV rear terminals
VCR (for playing)
DVD player
(composite signals)
75-ohm
coaxial cable
(not supplied)
VCR (for recording)
DVD player
(with component
video signals
input)
(Connect
directly if not
using a VCR)
• When connecting to COMPONENT (VIDEO-2) input,
depending on the connection, choose the appropriate
video input using the menu (\ page 14).
Connecting to the front video input terminal
Camcorder or TV game
Aerial cable
RF output
Rear of VCR
(Connect via a VCR)
Audio output
RF input
Headphones
Video output
S-video output
After all the connections have been made,
insert the mains plug to the AC outlet.
4
Initial settings
Edit the channel list
Turn on the TV
%$)4
4
02
!6
ꢁ
ꢄ
ꢇ
ꢃ
ꢉ
ꢆ
#(ꢀ##
1
2
3
#( ꢂꢃ
#( ꢅꢆ
#( ꢅꢈ
#( ꢂꢉ
#( ꢄꢈ
#( ꢁꢂ
or wait 15 seconds to
run Setup Tour
To edit the
channel list,
\ page 15.
To complete
Setup Tour
JVC logo appears
).3%24
$%,%4%
-!.5!,
-/6%
-%.5 ꢊ %8)4
To restart Setup Tour after above setup has completed
Select a language
,!.'5!'%
1
Select
(while the cursor is pointing to
PICTURE MODE and within 3
seconds)
%.',)3(
Vieät
/+ ꢀ ꢁ 3%,%#4
$)30,!9 ꢁ "!#+
-%.5 ꢁ %8)4
2
Confirm
Searching for the channels (AUTO PROGRAM)
AUTO PROGRAM
22%
OK / : EDIT
To stop or wait until AUTO PROGRAM
finishes
5
Remote control buttons and basic functions
Turn the TV on from standby and vice versa
• Insert two batteries by following the
and polarities and inserting the end
first.
Programme and recall 4 favourite channels
(colour buttons: red, green, yellow, blue)
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work
properly, fit new batteries. The supplied
batteries are for testing, not regular use.
Choose the TV channel you wish to programme
PROGRAMMED! ■
Press and hold
any button
Operating the menus (\ page 7)
Repeat to programme another favourite channel.
To recall the favourite channel, press the
corresponding colour button.
• Display the programme or video terminal number and
stereo/bilingual broadcast system.
• To return to the previous menu
• When the TV is in Text function or MENU mode, the
favourite channel function is not available.
• When the TV is in PIP function, the favourite channel
function cannot be programmed but can recall the
favourite channel.
RETURN PLUS function
Return to the frequently viewed channel.
TV or video terminal input selection, Exit from the menu
Turn the volume Off / On
Choose the channel you want to programme
RETURN PLUS
PROGRAMMED!
Programme number selection
For two digits :
Press and hold
To cancel
Adjust the volume level, Turn off Muting
RETURN PLUS
CANCELED!
Press and hold
RETURN function
Channel selection
Select the desired channel number.
If you have not set or have canceled the RETURN PLUS
channel, this will return to the previously viewed channel.
For Hyper Scan
PR changes without changing the
picture. Once you stop pressing
CHANNEL+ or CHANNEL– button,
picture will change to the desired PR.
Press and hold
6
TV buttons and functions
The illustration of AV-29S357 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated.
TV or Video terminal input selection,
Exit from the menu
Display the menu and exit after finish setting
Video and audio
input jacks for
VIDEO-3 mode
Channel selection, To select menu function
ECO sensor
TV’s main power on/off
Volume level adjustment, To choose a Top
menu and adjust the desired menu function
Remote control sensor
Headphone jack
Power lamp - Indicates the TV’s status.
No colour: TV’s main power is being turned off.
Red: TV’s main power is turned on.
Blink: While the TV is in standby mode, ON TIMER function is in used.
While the TV is in turn on mode, OFF TIMER function is in used.
Note: When you turn off the power switch while TV is in standby mode,
the power lamp will go off in 5-10 seconds. When you operate the
TV, POWER Lamp will blink.
Operating the menus
MENU
TOP menu
SET UP menu
2nd menu
3rd menu
EDIT
Example: MENU
EDIT/MANUAL
To display the To select a Top menu.
MENU.
To select a second menu.
To select for go to third
menu.
To select, adjust or
choose the setting of a
function.
To exit.
Select
Select
or
Select
Select
or
When the cursor is at MENU.
To display
To return to
Select
other pages. the previous
menu.
Adjust
Depend to the on screen Depend to the on screen
guide. guide.
7
Operating the menus (continued)
You can use the DVD MENU by switch channel to VIDEO-2 or press the DVD MENU button on the remote control. See the menus location in the below table.
For RF / Video-1 / Video-3 (MENU)
3rd menu / Adjustments
For Video-2 (DVD MENU)
3rd menu / Adjustments
Top menu Page
2nd menu
PICTURE MODE
DVD THEATER STATUS set to OFF : USER / SHARP / CLEAR / VIVID / SOFT
DVD THEATER STATUS set to ON : USER / SHARP / CLEAR
9
USER / VIVID / SOFT
PICTURE
PICTURE MODE set to USER : CONTRAST / BRIGHT/ SHARP / COLOUR / TINT
PICTURE MODE set to SHARP or CLEAR or SOFT or VIVID : –
PICTURE MODE set to USER : CONTRAST / BRIGHT/ SHARP/
COLOUR / TINT
10 PICTURE SETTING
PICTURE MODE set to SOFT or VIVID:–
or
DVD THEATER STATUS set to OFF : NORMAL / COOL / WARM
DVD THEATER STATUS set to ON : –
9
WHITE BALANCE
NORMAL / COOL / WARM
DVD MENU
VNR
(Only available in RF, VIDEO-1 and VIDEO-3)
13
9
OFF / AUTO / MIN / MAX
–
PICTURE
*
PICTURE BOOSTER
OFF / HIGH / LOW
–
–
AUTO SIGNAL DETECT
(Only available in VIDEO-2)
13
ON / OFF
DVD THEATER STATUS
(Only available in VIDEO-2)
13
–
ON / OFF
12 AI VOLUME
ON / OFF
ON / OFF
SOUND
or
12 SOUND MODE
USER / MUSIC / CINEMA / NEWS
USER / MUSIC / CINEMA / DRAMA
EQUALIZER (SOUND MODE set to USER
11
Adjust the sound level of each frequencies.
Adjust the sound level of each frequencies.
and CINEMA SURROUND set to OFF only)
DVD MENU
SOUND
12 BALANCE
Left Stronger / Right Stronger
ON / OFF
Left Stronger / Right Stronger
ON / OFF
*
11 CINEMA SURROUND
11 MaxxBass
OFF / HIGH / LOW
Set timer for turn on the TV
Set timer for turn off the TV
ON / OFF
OFF / HIGH / LOW
Set timer for turn on the TV
Set timer for turn off the TV
ON / OFF
14 ON TIMER
14 OFF TIMER
14 CHILD LOCK
9
COMPRESS (16:9 )
ON / OFF
ON / OFF
FEATURES
DVD THEATER STATUS set to OFF : OFF / MODE-1 / MODE-2 / DISPLAY or
OFF / ECO-1 / ECO-2
DVD THEATER STATUS set to ON : –
AI ECO SENSOR or
ECO MODE
OFF / MODE-1 / MODE-2 / DISPLAY or
OFF / ECO-1 / ECO-2
10
14 VIDEO-2 SETTING
PICTURE BOOSTER
VIDEO / COMPONENT
HIGH / LOW / OFF
ON / OFF
VIDEO / COMPONENT
HIGH / LOW / OFF
ON / OFF
9
10 BLUE BACK
10 PICTURE TILT
14 BEEP
Tilt the picture.
Tilt the picture.
ON / OFF
ON / OFF
15 AUTO PROGRAM
15 EDIT / MANUAL
Register the TV channel.
MOVE / INSERT / DELETE / MANUAL
Register the TV channel.
MOVE / INSERT / DELETE / MANUAL
SET UP
ViDEO-2 SETTING set to COMPONENT : AUTO
ViDEO-2 SETTING set to VIDEO : AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43
9
COLOUR SYSTEM
AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43
Select the languages.
13 LANGUAGE
Select the languages.
* For DVD THEATER STATUS set to ON only
8
Picture setting
COLOUR SYSTEM
You can select the appropriate colour system when the picture is not clear
or no colour appears.
WHITE BALANCE
You can change the white balance of the picture to better match the type
of video being viewed.
MENU
PICTURE menu
WHITE BALANCE
AUTO → PAL → SECAM → NTSC3.58 → NTSC4.43
NORMAL
COOL
Normal white balance
Bluish white
You can also operate this function from the menu.
WARM
Reddish white
MENU
SET UP menu
COLOUR SYSTEM
When DVD THEATER STATUS set to ON, WHITE BALANCE is not
available in VIDEO-2. \ Page 8.
For the colour system in each country or region, see the table below:
Area
Country or Region
System
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,
Indonesia, Malaysia, Singapore, Thailand, India, China, Vietnam,
Hong Kong, etc.
PAL
Asia,
Middle East
COMPRESS (16:9)
You can convert a normal picture (4:3 aspect ratio) into a wide picture
(16:9 aspect ratio).
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
SECAM
NTSC
SECAM
PAL
Europe
Oceania
Africa
(Choose ON or OFF)
MENU
FEATURES menu
COMPRESS (16:9)
Czech Republic, Poland, Germany, Holland, Belgium, UK, etc.
Australia, New Zealand, etc.
PAL
Republic of South Africa, Nigeria, etc.
Egypt, Morocco, etc.
PAL
PICTURE MODE
SECAM
You can choose the desired picture setting with one-touch.
USER
You can change this picture setting (CONTRAST,
BRIGHT, SHARP, COLOUR, TINT) as you like.
(\ PICTURE SETTING)
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due to the low
signal reception.
SHARP
VIVID
To sharpen this picuture.
Heightens contrast and sharpness.
Softens contrast and sharpness.
To soften the picture.
MENU
PICTURE menu
PICTURE BOOSTER
SOFT
OFF
Cancel the function
CLEAR
HIGH
LOW
Perform at maximum level.
Perform at minimum level.
You can also operate this function from the menu.
MENU
PICTURE menu
PICTURE MODE
To return the USER setting to default, press the blue button when the
PICTURE SETTING menu is displayed.
See details for the location menus in "Operating the menus" \ Page 8.
9
Picture setting (continued)
PICTURE SETTING
You can adjust the desired picture setting when selecting USER in
PICTURE MODE.
AI ECO SENSOR (ECO)/ECO MODE
You can automatically adjust TV screen contrast according to the
brightness of your room.
MENU
MENU
PICTURE menu
PICTURE menu
PICTURE MODE
USER
OFF
Cancel the function.
Mild contrast (recommended).
Even contrast.
1
2
MODE-1/ECO-1
MODE-2/ECO-2
PICTURE SETTING
CONTRAST 2 : Lower contrast
3 : Higher contrast
3 : Brighter
DISPLAY (for Al ECO SENSOR only) Display the graphic of the function.
BRIGHT
SHARP
COLOUR
TINT
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
You can also operate this function from the menu.
3 : Higher
MENU
FEATURES menu
AI ECO SENSOR / ECO MODE
3 : Deeper
3 : Greenish
Note: Al ECO SENSOR for S and R series.
ECO MODE for Q series.
See details for the location menus in “Operating the menus” \ Page 8.
When DVD THEATER STATUS set to ON, Al ECO SENSOR / ECO
MODE is not available in VIDEO-2. \ Page 8.
BLUE BACK
Correcting the Slanting Picture (PICTURE TILT)
You can set the TV to automatically change to a blue screen and mute the
sound if the signal is weak or absent, or when there is no input from an
antenna.
You can correct the picture tilt caused by the earth’s magnetic force.
MENU
FEATURES menu
PICTURE TILT
1
2
(Choose ON or OFF)
The following display appears.
MENU
FEATURES menu
BLUE BACK
PICTURE TILT
This function is only available in RF mode.
DISPLAY : BACK
MENU : EXIT
Tilt the picture
becomes level
To confirm
10
Picture in picture (PIP) operation
You can display a sub picture within the main picture on the screen.
to display the sub picture.
Sound setting
MaxxBass
You can enjoy an enhanced bass sound which cannot be played by
normal speakers.
You can hear the sound from the main picture only.
OFF
MaxxBass is turned off.
MaxxBass effect is high.
MaxxBass effect is low.
When main picture and sub picture are the same TV channel:
HIGH
LOW
Press SUB-P -/+
Press (Input)
Main picture will be changed TV channel follow as sub
picture.
You can also operate this function from the menu.
To change sub picture to video mode.
MENU
SOUND menu
MaxxBass
Press CHANNEL -/+ Sub picture will be changed TV channel follow as Main
picture.
"MaxxBass" is a registered trademark of Waves Audio Ltd. in the USA,
Japan and other countries.
Press CHANNEL -/+ Until main picture change to video mode.
CINEMA SURROUND
To cancel, press the PIP button again.
You can enjoy an enhanced sound for wider audience.
While a sub picture is being displayed, you can perform the following
functions.
OFF
ON
Cancel the function.
Listen to sound with wider audience effect.
Select the desired TV channel for sub picture.
(SUB-P)
You can also operate this function from the menu.
(Input)
(Swap)
Select the input source for the sub picture.
MENU
SOUND menu
CINEMA SURROUND
Swap between the main picture and sub picture.
EQUALIZER
(Position) Change the sub picture position.
lower right → lower left
You can adjust the sound level of each frequencies when selecting USER
mode in SOUND MODE.
upper right → upper left
Freeze the sub picture.
MENU
MENU
SOUND menu
SOUND menu
SOUND MODE
EQUALIZER
USER
(Freeze)
1
2
3
When VIDEO-2 is set to component, you cannot select VIDEO-2 for sub
picture.
When VIDEO-2 is set to component and if the input source of the main
picture is set to VIDEO-2 with component, PIP button is disabled and sub
picture cannot be displayed.
%15!,):%2
Select and adjust the desired frequencies.
ꢀꢁꢁ ꢂꢁꢁ
ꢀ+
ꢂ+
ꢃ+ (Z
ꢀ ꢄ ꢁ ꢅ 3%,%#4
$)30,!9 ꢅ "!#+
-%.5 ꢅ %8)4
Adjust high frequency will affect higher pitch sound and vice versa.
When CINEMA SURROUND set to ON, you cannot adjust EQUALIZER
(\ page 8).
11
Sound setting (continued)
BALANCE
SOUND SYSTEM
You can adjust the volume balance between the left and right speakers.
You can select an appropriate sound system when abnormal sound
occurs even when the picture appears normal.
MENU
SOUND menu
BALANCE
B/G → I → D/K → M
SOUND MODE
This function is not available in video mode.
For the sound system in each country or region, see the table below:
You can choose the desired sound setting.
USER
Change the sound setting as you like.
Select USER and adjust the frequencies in EQUALIZER
(100, 300, 1K, 3K, 8K Hz), \ page 11.
Area
Country or Region
System
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,
Indonesia, Malaysia, Singapore, Thailand, India, etc.
B/G
MUSIC
CINEMA
NEWS
Emphasize on music effect.
Emphasize on movie sound.
Emphasize on vocal sound.
Emphasize on drama sound.
China, Vietnam, etc.
D/K
I
Asia,
Middle East
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
B/G
M
DRAMA
You can also operate this function from the menu.
D/K
B/G
I
Europe
MENU
SOUND menu
SOUND MODE
When SOUND MODE is set to other than USER, EQUALIZER function
becomes unavailable.
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, Egypt, Morocco, etc.
B/G
I
See details for location menus in "Operating the menus" \ Page 8.
B/G
AI VOLUME
You can adjust the volume of all the channels and video inputs to the
same level automatically depends on the strength of signal of the sources.
(Choose ON or OFF)
AI VOLUME
MENU
SOUND menu
12
Customized setting
AUTO SIGNAL DETECT
VNR
When the DVD input signal is detected, the input mode will automatically
change to VIDEO-2 and when the DVD input signal is not detected, the
input mode will automatically change to RF previous input mode.
DVD players: Press the “POWER ON” button on the player for signal
detection.
VCRs: Press the “POWER ON” button on the device, followed by the
“PLAY” button, signal detection and DVD menu display.
DVD MENU
You can reduce the picture noise.
MENU
PICTURE menu
VNR
OFF
VNR is turned off.
AUTO
MIN
Effect of VNR is automatically controlled.
Effect of VNR becomes minimum level.
Effect of VNR becomes maximum level.
MAX
AUTO SIGNAL
DETECT
If you select MAX, the picture becomes softer even if the original picture
is sharp.
Only available in RF, VIDEO-1 and VIDEO-3. \ Page 8.
DVD MENU PICTURE
(Choose ON or OFF)
Only available in VIDEO-2 mode. \ Page 8.
LANGUAGE
DVD THEATER STATUS
You can choose the desired on screen display language.
You can enjoy an enhanced picture quality for movie playback in a dark
room, like watching a movie in the theater.
MENU
SET UP menu
LANGUAGE
DVD MENU
DVD THEATER
DVD MENU PICTURE
STATUS
OFF
ON
Cancel the function.
Enjoy movie playback with suitable colour temperature, sharp
subtitles and improved gradation for black, like in a theater.
When you set DVD THEATER STATUS to ON, Al ECO SENSOR / ECO
MODE and WHITE BALANCE adjustment become unavailable.
Only available in VIDEO-2 mode. \ Page 8.
13
Customized setting (continued)
ON TIMER
BEEP
You can set the TV to turn on automatically from standby mode at a set
channel and time.
You can use the BEEP function to alert you during AUTO SIGNAL
DETECT, Al ECO SENSOR Detect, Stereo Detect, ON TIMER/OFF
TIMER operations and when some buttons on the remote control are
pressed.
MENU
FEATURES menu
ON TIMER
1
/. 4)-%2
02
ꢀꢁ
(Choose ON or OFF)
MENU
FEATURES menu
BEEP
/. 4)-%2
ꢀꢀꢂꢁꢃ
ꢀ ꢄ ꢁ
ꢂ
3%,%#4
$)30,!9
-%.5 ꢂ %8)4
ꢂ
"!#+
CHILD LOCK
You can disable the front control buttons of the TV.
2
3
Choose the PR (channel) that you want to watch when the TV turns on.
External input, AV position and any un-preset channel cannot be
chosen for PR.
(Choose ON or OFF)
CHILD LOCK
MENU
FEATURES menu
VIDEO-2 SETTING
Set the ON TIMER to your desired period of time.
When the ON TIMER is set to other than 00:00, the ON TIMER is
activated. You can set the period of time to a maximum of 12 hours in
15-minute intervals.
You can set the VIDEO-2 SETTING according to the video signal output
from external devices connected to the VIDEO-2 terminal.
(Factory setting is
COMPONENT)
MENU
FEATURES menu
VIDEO-2 SETTING
4
To off the ON TIMER, set ON TIMER to OFF.
VIDEO
If a normal video signal (composite video signal) is input.
Note: If TV is not in standby mode when ON TIMER is reach the setting
time, this case is not available.
B
R
COMPONENT If a component video signal (Y/C /C ) is input.
You must choose a setting according to the signal that you input to
VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you
must set VIDEO-2 SETTING to VIDEO.)
OFF TIMER
You can set the TV to turn off automatically to standby mode after a set
time.
For connection, \ page 4.
OFF TIMER
10
MENU
FEATURES menu
OFF TIMER
1
2
You can set the period of time to a maximum of 120 minutes in 10
minutes intervals.
3
4
5
When the remaining elapse time is one minute, “GOOD NIGHT!”
appears on the screen.
You can display the OFF TIMER screen again to confirm or change the
remaining time.
To off the OFF TIMER, select OFF or turn off the TV’s main power.
14
TV channel presetting
To register the TV channels automatically
(AUTO PROGRAM)
OR
6
7
to search for the TV channel.
(green)
(red)
You can register the TV channels automatically.
Searching stops when a channel is found and displayed.
MENU
SET UP menu
AUTO PROGRAM
1
2
If the reception is
poor
Press the yellow or blue button to fine tune the TV
channel.
AUTO PROGRAM
If noisy sound is
heard
Press the 3 button to choose an appropriate sound
system.
22%
or
OK / : EDIT
8
to exit.
3
4
to stop or when AUTO PROGRAM finishes.
The EDIT menu appears.
To edit the channel list
(MOVE, DELETE and INSERT in the EDIT menu)
You can edit the TV channel list as you like.
To edit the channel list Proceed to Step 2 of “To edit the channel list” on this
After this operation, other channel’s PR number will be changed.
page.
If a channel is not
registered
Proceed to Step 3 of “To register the TV channels
manually” on this page.
1
2
3
Repeat Steps 1 and 2 of “To register the TV channels manually
(MANUAL in the EDIT menu)”, \ see left.
To exit the menu
Press the MENU button.
Choose the channel which you want to change its PR number, or
delete, or register a new channel.
To register the TV channels manually
(MANUAL in the EDIT menu)
To change the Press the 3 button. Then move it to the new PR number
You can register the TV channels into the TV’s channel list manually.
PR number
(MOVE)
you want to use for the channel by pressing the 5/∞ button.
Finally press the 2 button.
MENU
SET UP menu
EDIT/MANUAL
1
2
To delete
the channel
(DELETE)
Press the yellow button.
%$)4
02
!6
ꢁ
ꢄ
ꢇ
ꢃ
ꢉ
ꢆ
#(ꢀ##
#( ꢂꢃ
#( ꢅꢆ
#( ꢅꢈ
#( ꢂꢉ
#( ꢄꢈ
#( ꢁꢂ
To add the
new channel
(INSERT)
If you add a new TV channel of NTSC-M system, press the
SOUND SYSTEM button to change the sound system to M,
then select EDIT/MAMUAL in SET UP menu. Press the green
button, then press the 3 button to choose “CC” or “CH”.
Enter the CH/CC number for the channel you wish to add.
The TV starts to search for the channel.
or
).3%24
$%,%4%
-/6%
-%.5 ꢊ %8)4 -!.5!,
3
4
Choose the channel which you want to register.
to activate the MANUAL function. (The sound system of
the channel appears at the right of the CH/CC number.)
When a TV channel has already been registered in PR99,
using the INSERT function deletes that TV channel.
(blue)
5
to choose an appropriate sound system.
For details, see “SOUND SYSTEM”. \ Page 12
4
to exit.
15
TV channel presetting (continued)
CH/CC number
CC
US
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
CCIR
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
OIRT
AUSTRALIA
CH
US
CCIR
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
OIRT
AUSTRALIA
AU-34
AU-35
AU-36
AU-37
AU-38
AU-39/AU-40
AU-41
AU-42
AU-43
AU-44
AU-45
AU-46
AU-47/AU-48
AU-49
AU-50
AU-51
AU-52
AU-53
AU-54
AU-55/AU-56
AU-57
AU-58
AU-59
AU-60
AU-61
AU-62
AU-63/AU-64
AU-65
When you want to use the INSERT function on
page 15, find the CH/CC number corresponding
to the channel number of the TV channel from
this table.
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
Channel No. Country
US
United States, Philippines, etc..
Middle East, Southeast Asia, etc..
CCIR
OIRT
Eastern Europe, Russia, Vietnam,
etc..
U
V
W
AUSTRALIA Australia, etc..
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
Channel
CH
US
US-2
CCIR
E2
OIRT
R1
AUSTRALIA
AU-0
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
US-3
US-4
US-5
US-6
US-7
US-8
US-9
US-10
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
R2
R6
R7
R8
R9
AU-66
AU-67
AU-68
AU-69
R10
R11
R12
AU-10
AU-11
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
CC
US
CCIR
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
OIRT
AUSTRALIA
AU-5
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
AU-5A
X
Y
Z
Z+1
Z+2
S-9
R3
R4
R5
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
AU-3
AU-4
AU-28
AU-29
AU-30
AU-31/AU-32
AU-33
A-5
A-4
A-3
A-2
A-1
A
B
C
D
16
Troubleshooting
If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.
Problem
Cause / Solution
Page
Colour patches appear • This maybe due to magnetized device such
–
at the corner of the
screen
as a speaker placed near to your TV. Move it
away from your TV. Alternatively, you can also
use the magnetic shielded speaker.
Problem
Cause / Solution
Page
No picture, no sound
• Deactivate the BLUE BACK function if it is
turned on.
10
Picture is tilted
• This maybe due to the earth magnetism. Refer 10
to “PICTURE TILT” to correct the tilt.
• Choose the appropriate sound system. Refer
to “SOUND SYSTEM”.
12
Image takes a short
period to be displayed
• Image required time to stabilize before display.
This is not a malfunction.
–
Snowy picture
• Check the aerial cable and TV connections.
4
–
Stripes appear on the
picture
• Interference caused by devices such as an
amplifier, personal computer, or a hair drier.
Move it away from your TV.
TV may emit crackling
sound
• This is due to a sudden change in temperature
and it is not a malfunction. If the crackling
sound is too frequent, request your service
technician for inspection.
–
Double-pictures
(ghosting) occur
• Interference occurs caused by signal reflecting
from mountains or building. Try to adjust the
aerial’s direction or use another antenna.
–
Feel a slight electric
shock when touching
the TV screen
• This is due to the static electricity of the
picture tube and it will not harm the human
body. This is not a malfunction.
–
Poor picture
• Choose the appropriate colour system. Refer
to “COLOUR SYSTEM”.
9
AUTO SIGNAL DETECT • Set the AUTO SIGNAL DETECT function to
does not work
13
• Adjust the COLOUR or BRIGHT setting. Refer
to “PICTURE SETTING”.
10
ON.
• Turn the VCR or DVD Player off and on again.
• Check that the video cable connection on
VIDEO-2 is properly connected.
–
–
White and bright still
image look as if it was
coloured
• Inevitable phenomenon due to the nature of
the picture tube. This is not a malfunction.
–
–
Suddenly, the TV input • Check whether the AUTO SIGNAL DETECT
changes to VIDEO-2
13
–
Top of the image from
software products or
video tape is distorted
• Due to the condition of the video signal, the
image was not properly recorded. This is not a
malfunction.
function is on or off.
• AUTO SIGNAL DETECT function may work
when you operate the VCR or DVD player
even if you do not make it to playback.
Poor sound
• Adjust the sound frequency properly. Refer to
“SOUND SYSTEM”.
12
6
AUTO SIGNAL DETECT • Check the video cable connection.
does not work correctly • Some VCR or DVD player may output the
video signal discontinuously. If this happens,
AUTO SIGNAL DETECT function cannot work
correctly.
–
–
Cannot operate the
remote control
• The batteries may be exhausted. Replace with
new batteries.
• Ensure that you are operating the remote
control at less than seven meters from the
front of your TV.
“PLEASE DISCONNECT • Please disconnect either S-VIDEO cable or
–
Cannot operate the
menus
• Press TV/VIDEO button to return to TV mode
and try operating the menus.
–
VIDEO-1 CABLE!”
appears on the screen.
video input cable from video-1 input.
Cannot operate the
front control buttons
• Deactivate the CHILD LOCK function if it is
turned on.
14
17
Specifications
MODE
AV-21Q317B
AV-21R318
AV-21RXP8
AV-21S357
TV RF systems
B, G, I, D, K, M
Colour systems
(RF mode)
(VIDEO mode)
PAL, SECAM, NTSC3.58 MHz, NTSC4.43 MHz
PAL, SECAM, NTSC3.58 MHz, NTSC4.43 MHz
Channel and Frequencies
VHF low channel (VL) : 46.25 to 140.25 MHz
VHF high channel (VH) : 147.25 to 423.25 MHz
UHF channel (U) : 431 to 863.25 MHz
*Receives cable in mid band ( X to Z, S1 to S10, super band (S11 to S20) and hyper band (S21 to S41)
Power input
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
Power consumption
MAX : 105 W
AVG : 95
MAX : 108 W
AVG : 88
MAX : 108 W
AVG : 88
MAX : 122 W
AVG : 99 W
W
W
W
Screen size
(Measured diagonally)
Picture tube : 548.4 mm Picture tube : 548.8 mm Picture tube : 548.8 mm Picture tube : 548.4 mm
Visible area : 508.0 mm Visible area : 508.0 mm Visible area : 508.0 mm Visible area : 508.0 mm
Audio output
(Rated power output)
(6.5 x 13) cm x 2
3W + 3W
(6.5 x 13) cm x 2
7W + 7W
(6.5 x 13) cm x 2
7W + 7W
(6.5 x 13) cm x 2
7W + 7W
Speakers
External input / output
VIDEO - 1 : S-VIDEO input, VIDEO input, AUDIO L/R input
VIDEO - 2 / COMPONENT : VIDEO input,AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input
VIDEO - 3 :VIDEO input, AUDIO L/R input
OUTPUT : VIDEO output, AUDIO L/R output
Headphone jack : Stereo mini jack (3.5 mm diameter)
Dimension (W x H x D)
Weight
649 x 487 x 351 mm
22 kg
649 x 487 x 488 mm
23 kg
649 x 487 x 488 mm
23 kg
649 x 487 x 351 mm
22 kg
Accessories
Remote control unit :
RM-C1171 x 1
Remote control unit :
RM-C1171 x 1
Remote control unit :
RM-C1170 x 1
Remote control unit :
RM-C1170 x 1
AA/R6/UM-3 dry cell
battery x 2
AA/R6/UM-3 dry cell
battery x 2
AA/R6/UM-3 dry cell
battery x 2
AA/R6/UM-3 dry cell
battery x 2
Matching aerial adapter x 1 Matching aerial adapter x 1 Matching aerial adapter x 1 Matching aerial adapter x 1
Design and specifications subject to change without notice.
18
Specifications
MODE
AV-29Q317B
AV-29RXP8
AV-29S357
TV RF systems
B, G, I, D, K, M
Colour systems
(RF mode)
(VIDEO mode)
PAL, SECAM, NTSC3.58 MHz, NTSC4.43 MHz
PAL, SECAM, NTSC3.58 MHz, NTSC4.43 MHz
Channel and Frequencies
VHF low channel (VL) : 46.25 to 140.25 MHz
VHF high channel (VH) : 147.25 to 423.25 MHz
UHF channel (U) : 431 to 863.25 MHz
*Receives cable in mid band ( X to Z, S1 to S10, super band (S11 to S20) and hyper band (S21 to S41)
Power input
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
Power consumption
MAX : 163 W
AVG : 132 W
MAX : 152 W
AVG : 139 W
MAX : 163 W
AVG : 132 W
Screen size
(Measured diagonally)
Picture tube : 728.0 mm
Visible area : 676.0 mm
Picture tube : 728.9 mm
Visible area : 676.0 mm
Picture tube : 728.0 mm
Visible area : 676.0 mm
Audio output
(Rated power output)
(6.5 x 13) cm x 2
10W + 10W
(6.5 x 13) cm x 2
10W + 10W
(6.5 x 13) cm x 2
10W + 10W
Speakers
External input / output
VIDEO - 1 : S-VIDEO input, VIDEO input, AUDIO L/R input
VIDEO - 2 / COMPONENT : VIDEO input,AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input
VIDEO - 3 :VIDEO input, AUDIO L/R input
OUTPUT : VIDEO output, AUDIO L/R output
Headphone jack : Stereo mini jack (3.5 mm diameter)
Dimension (W x H x D)
Weight
810 x 616 x 394 mm
38 kg
810 x 616 x 506.5 mm
42 kg
810 x 616 x 394 mm
41 kg
Accessories
Remote control unit :
RM-C1171 x 1
Remote control unit :
RM-C1170 x 1
Remote control unit :
RM-C1170 x 1
AA/R6/UM-3 dry cell battery x 2
Matching aerial adapter x 1
AA/R6/UM-3 dry cell battery x 2
Matching aerial adapter x 1
AA/R6/UM-3 dry cell battery x 2
Matching aerial adapter x 1
Design and specifications subject to change without notice.
19
© 2007 Victor Company of Japan, Limited
0707SCT-NF-MT
|