DEUTSCH
ENGLISH
AV-28ED5BN
AV-28ED5SN
BEDIENUNGSANLEITUNG
FARBFERNSEHGERÄT
COLOUR TELEVISION
INSTRUCTIONS
50064523
0205TKH-VT-VT
©2005 Victor Company of Japan, Limited
Contents
Safety Precautions
1. Power Source
Safety Precautions .................................................17
Remote Control Buttons ........................................18
Control Panel Buttons............................................19
Antenna Connections .............................................19
The receiver should be operated only from a 220-240V AC,
50 Hz. outlet. Ensure you select the correct voltage setting
for your convenience.
2. Power Cord
The power supply cord should be placed so that they are not
likely to be walked on or pinched by items placed upon them
or against them. Pay particular attention to cord where they
enter the plug, power outlet, and the point where they exit
from the receiver.
Preparation..............................................................20
Features .........................................................................20
Before Switching on your TV ................................20
Power connection............................................................20
Aerial Connections ..........................................................20
How to connect the external equipments.........................20
Inserting batteries in the remote control handset .............20
3. Moisture and Water
Do not use this equipment in a humid and damp place (avoid
the bathroom, the sink in the kitchen, and near the washing
machine). Do not expose this equipment to rain or water and
do not place objects filled with liquids on it as this may be
dangerous.
Switching the TV ON/OFF ......................................20
To switch the TV on.........................................................20
To switch the TV off .........................................................20
4. Cleaning
Initial Settings .........................................................20
Before cleaning, unplug the receiver from the main supply
outlet. Do not use liquid or aerosol cleaners. Use with soft
and dry cloth.
T-V LINK .........................................................................21
Operating with the onset buttons .....................................22
Operating with Remote Control........................................22
Menu System ...........................................................22 5. Ventilation
Picture Menu ..................................................................22
Sound Menu....................................................................23
Install (Installation) Menu.................................................24
Using the Decoder (EXT-2) function .................................26
Feature Menu ..................................................................27
The slots and openings on the receiver are intended for venti-
lation and to ensure reliable operation. To prevent overheating,
these openings must not be blocked or covered in anyway.
6. Lightning
In case of storm and lightning or when going on holiday, dis-
connect the power cord from the wall outlet.
Other Features........................................................28
Sound Mute ....................................................................28
Stereo / Bilingual .............................................................28
Information on Screen .....................................................28
To Display the Time.........................................................28
Picture ............................................................................28
7. Replacement Part
When replacement parts are required, be sure the service
technician has used replacement parts which are specified
by the manufacturer or have the same specifications as the
original one. Unauthorized substitutions may result in fire,
electrical shock, or other hazards.
VCR / DVD Control Buttons and VCR /
/ DVD Switch 28
Teletext ....................................................................28
8. Servicing
To operate Teletext ..........................................................28
To select a page of Teletext .............................................28
To Select Index Page ......................................................29
Searching for a teletext page while watching TV..............29
To Select Double Height Text ..........................................29
To Reveal concealed Information ...................................29
To StopAutomatic Page Change .....................................29
To Select a Subcode Page ..............................................29
To exit Teletext ................................................................29
Fastext and Toptext ........................................................29
Please refer all servicing to qualified personnel. Do not re-
move cover as this may result in electric shock.
9. Flame sources
Do not place naked flame sources on the apparatus.
10. Stand-By
Do not leave your TV stand-by or operating condition when you
leave your house.
Warning!
Connect the External Equipments........................30
Any intervention contrary to regulations, in particular, any
modification of high voltage or a replacement of the picture
tube may lead to an increased concentration of x-rays. Any
television modified in this way no longer complies with license
and must not be operated.
Via the Euroconnector.....................................................30
T-V LINK compatible VCR ...............................................30
RGB mode ......................................................................30
EXT-2 S Mode .................................................................30
Via the RCA jacks...........................................................30
Via the ANT (aerial) socket..............................................30
TV and Video Recoder (VCR) ..........................................30
NTSC Playback ..............................................................30
Copy Facility ...................................................................30
Connecting Headphones .................................................30
Instructions for waste disposal:
Packaging and packaging aids are recyclable and should
principally be recycled. Packaging materials, such as foil
bag, must be kept away from children.
Batteries, including those which are heavy metal-free, should
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
Tips...........................................................................32
Specifications..........................................................32
ENGLISH - 17 -
Remote Control Buttons
= Stand By / Power
0 - 9 = Direct Program
Yellow Button / Factory Settings in Picture Menu
Blue Button
PICTURE = Picture Mode Change
(
) = Programme Up (Cursor Up)
MENU = Menu Button
) = Cursor Right / Volume +
) = Programme Down (Cursor Down)
Teletext / VCR /DVD Control Buttons
(
(
= VCR /
/ DVD Switch
= Stereo / Bilingual Button
= Information Button / T-V Link in Program Menu
) = Cursor Left / Volume -
(
AV = AV Button
= Teletext Button
ZOOM = Zoom (Picture Size) Change / Red Button
= Hyper Sound / Green Button
= Mute
CAUTION
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk
of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
ENGLISH - 18 -
Control Panel Buttons
Antenna Connections
ENGLISH - 19 -
Replace the battery cover.
Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. To prevent any fault and unsafe situations, please do
not place any objects on top of the set.
Use this apparatus in tropical and moderate climates.
Features
It is a remote controlled colour television.
200 programmes from VHF, UHF bands or cable channels
can be preset.
NOTE: Remove batteries from remote control handset when it is
not to be used for a long period. Otherwise it can be damaged
due to any leakage of batteries.
It can tune cable channels.
Controlling the TV is very easy by its menu driven system.
It has two Euroconnector sockets for external devices (such
as video recorder, video games, audio set, etc.)
Switching the TV ON/OFF
Front AV (EXT-3) Input available.
Stereo sound systems (German+Nicam) are available.
3D Sound (3-Dimensional Sound).
Full function Teletext (Fastext, Toptext).
It is possible to connect headphone.
Direct channel access.
You can operate your TV either using the remote control
handset or directly using the TV onset buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV. Then
the TV switches itself to standby mode and the RED LED
located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a program-
me number is selected,
A.P.S. (Automatic Programming System).
All programmes can be named.
Forward or backward automatic tuning.
Sleep timer.
or,
Child Lock.
Press Standby / Power Button or Programme Up and Down
buttons on the TV or on the remote control respectively, so
the TV will switch on and the RED Led will turn GREEN.
Blue Background.
Comb Filter : Digital circuitry to make adjustments providing
outstanding picture quality with sharp, crisp edges, while vir-
tually eliminating dot crawl.
IMPORTANT:
If no aerial signal is received at the selected program for a
period of 5 minutes then your TV automatically switches
into stand-by mode.
CTI : (Colour Transient Improvement) Improvement of hori-
zontal transitions of chrominance (colour) signals.
T-V Link.
Automatic sound mute when no transmission.
To switch the TV off
When no valid signal is detected, after 5 minutes the TV
switches itself automatically to stand-by mode.
Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED, or,
WSS (Wide Screen Signaling).
NTSC Playback.
Press the power button located on the front of the TV.
NOTE: If you have switched of the TV set from the power but-
ton instead of the remote control, next time you press the
power button, the TV set will switch on without going to the
stand-by mode.
Before Switching on your TV
Power connection
Important: The TV set is designed to operate on 220-240 V
AC, 50 Hz.
Initial Settings
When the TV is first turned on. It enters the initial setting
mode, and the AUTOSTORE menu is displayed. Follow the
instructions below to do the initial settings.
After unpacking, allow the TV set to reach the ambient room
temperature before you connect the set to the mains.
Aerial Connections
Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect the external equipments
See Connect the External Equipments on page 31.
See the instruction manuals provided with the external de-
vices too.
Inserting batteries in the remote control handset
Remove the battery cover located on the back of the hand-
set by gently pulling upwards from the indicated part.
Insert two AAA (R03) or equivalent type batteries inside.
ENGLISH - 20 -
The AUTOSTORE menu does not appear when your TV has
been turned on once. In this case, use the LANGUAGE,
COUNTRY and AUTOSTORE items in the INSTALL
menu to make the initial settings. For details, see Install
(Installation) Menu on page 24.
After the AUTOSTORE is finalized, PROGRAM menu ap-
pears. You can delete a channel or change a programme
number. For details, see Program Menu on page 26.
If you want to do the initial settings later, press PICTURE
button to turn the menu off.
1. Press "
" or "
" button to select "LANGUAGE"
item. Then press the or button to enter the "LAN-
GUAGE" sub-menu.
8. If you do not have a T-V LINK compatible VCR, press
PICTURE button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, press
button to display T-V LINK
menu. Then follow the operating procedure Downloading
data to VCR in the following T-V LINK section.
2. Press "
press the or button to store it.
" or "
" button to select a language. Then
3. Press the MENU button to return to the AUTOSTORE
menu.
4. Press "
" or "
" button to select "COUNTRY" item.
Then press the or button to enter the "COUNTRY"
sub-menu.
If a channel you want to view is not stored, store it using
the TUNING menu. For details, see Tuning Menu on
page 24.
T-V LINK
When a T-V LINK compatible VCR is connected to the EXT.2
Terminal on the TV, it is easier to set up the VCR and to view
videos. T-V LINK uses the following features:
To use T-V LINK functions:
A T-V LINK compatible VCR means a JVC video cassette
recorder with the T-V LINK logo, or with one of the following
logos. However, these VCRs may support some or all of the
features described earlier. For details, see your VCR instruc-
tion manual.
5. Press "
" or "
" button to select the country where
you are now located. Then press the or button to
store it.
6. Press the MENU button to return to the AUTOSTORE
menu.
Q-LINK (a trademark of Panasonic Corporation)
Data Logic (a trademark of Metz Corporation)
Easy Link (a trademark of Phillips Corporation)
Megalogic (a trademark of Grundig Corporation)
SMARTLINK (a trademark of Sony Corporation)
7. Press
or
button to select Continue item.
Then press button to start the AUTOSTORE function.
The AUTOSTORE function automatically stores the re-
ceived channels in your TV's programme numbers.
Downloading data to VCR:
The VCR will automatically download the registered data on
the TV channels from the TV. This means you do not need to
set up the programme channels on your VCR manually.
The T-V LINK menu will be displayed when you press the
button while PROGRAM menu is displayed, or when-
ever the INSTALL menu operations are performed.
APS: Automatic Programming System
Press button to start downloading data to VCR.
ENGLISH - 21 -
If you do not want to do, press the PICTURE button to exit Press MENU button to enter main menu. In the main
the menu.
menu select submenu using P/Ch+ or P/Ch- button and
enter the submenu using + or - button. To learn
the usage of the menus, refer to the Menu System section
of this manual.
Operating with Remote Control
When FEATURE NOT AVAILABLE is displayed:
The remote control handset of your TV is designed to control
all the functions of the model you selected. The functions will
be described in accordance with the menu system of your
TV.
If FEATURE NOT AVAILABLE is displayed, the download
was not performed correctly. Before trying to download again,
check that:
Functions which you can use out of menu system are de-
scribed below.
The VCR power is turned on
The VCR is T-V LINK compatible
The VCR is connected to the EXT.2 terminal
The SCART cable is fully wired.
Volume Setting:
Press button to increase volume.
Direct Rec:
Press button to decrease volume.
What You See Is What You Record
Programme Selecting (Previous or next programme):
You can easy record to VCR the images that you are watch-
ing on the TV. For details, read the manual for your VCR, Use
your VCR controls. You cannot carryout Direct Rec using Press
your TVs control.
Press
button to select the previous programme.
button to select the next programme.
When the VCR is not ready (for example when there is no
tape inserted), NO RECORDING is displayed.
In the following situations, the VCR will stop recording if the
TV is turned off, if the TV channel or input is changed, or if
the menu is displayed on the TV:
Programme Selecting (direct access):
When recording images from an external device connected
to the TV. (for example a camcorder)
Press digit buttons on the remote control handset to select
programmes between 0 and 9. TV will switch to the selected
program after a short delay.
When recording a TV channel after it has been unscrambled
on a decoder.
For a two or three digit program number enter the second or
third digit after pressing the first digit within 2 seconds.
When recording a TV channel by using the TVs output be-
cause the VCRs own tuner cannot properly receive that
channel.
Menu System
TV auto power on/VCR image view:
Your TV has been designed with a menu system. Display
MENU (main menu) and enter one of four menus (PICTURE,
SOUND, INSTALL and FEATURE).
When the VCR starts playing, the TV automatically turns on
and the images from EXT.2 (EXT-2) terminal appear on the
screen.
1- Press MENU button to display MENU (main menu). The
menu titles will be displayed in the main menu.
This function does not happen if your TVs main power
is turned off. Set your TVs main power to on (standby
mode).
2- Press
or
button to select a menu title, then
press or button to enter the menu.
To exit a menu, press PICTURE button.
To go to the previous menu, press MENU button.
Operating with the onset buttons
Volume setting and programme selection can be made using
the buttons on the right side of the TV.
Picture Menu
Volume Setting:
To change picture settings:
Press -
button to decrease volume or
+ button to
Press MENU button, now you are in main menu. In the
main menu, select PICTURE using
then enter the picture menu pressing or button.
increase volume, so a volume level scale will be displayed
on the screen.
or
button,
Programme Selecting:
Press P/Ch+ button to select next programme or P/Ch-
button to select the previous programme.
Entering Main Menu:
ENGLISH - 22 -
Note: When Picture Mode is not USER, BRIGHTNESS,
CONTRAST and COLOUR options can not be operated or
button.
The Noise reduction can be adjusted in four different lev-
els: Minumum, Medium, Maximum and Auto. Addition-
ally it can be cancelled by selecting the OFF option. Press-
ing or button toggles between these five settings.
Factory Settings:
When Picture Mode is selected User if you press the YEL-
LOW button the adjustmens switches themselves to the fac-
tory settings.
The Zoom can be three different modes: Auto, 4:3 or 16:9
modes. Using or button toggle between these differ-
ent screen formats.
You can change the values of this items firstly by selecting
the item by
or
button and then by using or
button. The PICTURE menu disappears and level indica-
tors are displayed while items are changed. The PICTURE
menu is restored after adjustment is finished.
The Picture Mode can be stored for all channels (200 chan-
nels) individually.
It is also possible to change picture modes directly by press-
ing ZOOM button (RED button) on your remote control.
This item is used to change the picture mode. By pressing
or button you may choose one of these options:
Bright, Standard, Soft, User.
You can change the Hue for NTSC 3.58/4.43 systems by
or button after selecting this item. A level indicator for
Hue is displayed while changing this item. The Hue bar is
displayed while an NTSC signal is input from the EXT-1,
EXT-2, or EXT-3 (Front AV) terminal.
Recalling Factory settings.:
You can re-set the current PICTURE menu settings (except
Noise Reduction and Colour Temp settings) to the default
settings.
You can change Brightness only when Picture Mode is se-
lected User.
Press PICTURE button when no menu appears.
You can change the Brightness by or button after
selecting this item.
Sound Menu
To change sound settings:
You can change Contrast only when Picture Mode is select-
ed User.
Press MENU button, now you are in main menu. In the
main menu, select SOUND using
then enter the sound menu pressing or button.
or
button,
You can change the Contrast by or button after se-
lecting this item.
You can change Colour only when Picture Mode is selected
User.
You can change the Colour by or button after select-
ing this item.
You can change the Sharpness by or button after
selecting this item.
Setting Volume:
Using
or
button to select Volume.
You can adjust the Colour Temp item as Normal, Warm
and Cool. Using or button toggle between these
three settings.
Press button to increase volume.
Press button to decrease volume.
ENGLISH - 23 -
Install (Installation) Menu
Press MENU button, now you are in main menu. In the
main menu, select INSTALL, using
or
button.
Then enter the INSTALL menu pressing or button.
Setting Balance:
Using or
button select Balance.
Press button to change balance rightward.
Press button to change balance leftward.
Menu Language Selection:
Press the
item.
or
button to select LANGUAGE
Setting Bass Level:
Press or button to enter LANGUAGE sub-menu.
Using
or
button select Bass.
Press button to increase bass level.
Press button to decrease bass level.
Setting Treble Level:
Using
or
button select Treble.
Press button to increase treble level.
Press button to decrease treble level.
Press
guage:
or
button to select the desired menu lan-
After selecting the menu language press or button to
store the selected language.
Press MENU button to return to the INSTALL menu, or
Press PICTURE button to exit the menu.
Country Selection:
Press the
item.
or
button to select the COUNTRY
Hyper Sound:
Press or button to enter the COUNTRY sub-menu.
You can use this feature to switch on or off Hyper Sound.
Pressing or button will turn on or off this feature. If the
current sound system is MONO and the Hyper Sound is set
ON, then the sound will be heard as if it is STEREO. If the
current sound system is STEREO, switching Hyper Sound on
will make the sound deeper. Switching it off will make no
change in MONO and STEREO.
Hyper Sound can be set On or Off also by GREEN button.
3D SOUND (3-Dimensional Sound):
Press
or
button to select the country where
This function creates a 3-dimensional sound by using 2 exist-
ing loudspeakers on your TV set without any additional
speakers.
you are now located.
After selecting the country, press or button to store
the selected country.
Pressing or button will turn this feature ON and OFF.
Press MENU button to return to the INSTALL menu, or
Press PICTURE button to exit the menu.
Note:
3D SOUND is functional only when the current sound system
is STEREO.
Tuning Menu:
You can store a channel manually, or modify the current set-
tings of a channel (for example, changing the channel name).
ENGLISH - 24 -
In an AV mode, you can change only the MODE or CO- When you cannot search a channel you want, select the
LOUR SYSTEM setting.
"Standard" item and select other broadcasting system.
Then start searching again.
If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on the screen.
Standard:
Press
or
button to select TUNING item.
If you cannot hear the normal sound even when the picture
appears normally, select the correct broadcasting system to
hear the sound normally.
Press or button to enter TUNING menu.
Select "Standard" item. Then press or button to se-
lect a broadcasting system.
Colour system:
If the picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
Select "Colour system" item. Then press or button
to select a colour system.
Band, Channel:
If you know a channel number, you can find it directly by
entering the channel number.
Select the "Band" item. Then press or button to se-
lect the band (C or S) where the channel you want is lo-
cated.
1. Press
or
to select an item in the TUNING
menu. Then press or button to change the setting.
2. After all settings of a channel are completed, press
Select the Channel item. Then press or button to
select the channel number, or enter the channel number
with the digit buttons. The available channel numbers differ
depending on your COUNTRY and Standard settings.
or
button to select Programme item. Then press
or button to select a programme number which you
want to store the setting.
3. Press
or
button to select Store item. Then
Fine tuning:
press or button to store the setting.
If the channel reception is poor, fine-tune the channel.
The "STORED" appears at the bottom of the menu for 3
seconds. Then T-V LINK menu appears.
Select "Fine tuning" item. Then press or button to
fine -tune the channel.
Name:
You can store the channel name or change it.
Select Name item. Then press or button to display
a cursor.
4. If you do not have a T-V LINK compatible VCR, press
PICTURE button to exit the menu.
Press
or
button to select a character and
press or button to move the cursor.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, follow the operating procedure Down-
loading the data to VCR on page 21 to transmit the
Programme table data to the VCR.
After the name is completed, press the MENU button.
Mode:
Search:
Set "Mode" item to "TV" for the TV channels.
You can search a channel manually.
When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the "Mode" set-
ting from "TV" to "VCR".
Select "Search" item. Then press or button to start
searching. "SEARCHING" is displayed while the TV is
searching a channel.
Searching stops when the TV finds a channel. Then the
channel is displayed.
Decoder (EXT-2):
Press or button repeatedly until the channel you want
appears.
You can only set Decoder (EXT-2) item to ON if you have
a decoder connected to a T-V LINK compatible VCR, which
ENGLISH - 25 -
in turn is connected to the EXT.2 terminal. To use this item,
Press
or
button to select PROGRAM item.
please see the
Press or button to enter the PROGRAM menu.
Using the Decoder (EXT-2) function on the following sec-
tion.
Store:
After the all settings are completed, store the new channels
setting to the programme number which you selected.
Press
or
button to select Store, then press
or to store it.
Using the Decoder (EXT-2) function
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT.2 terminal, use
DECODER (EXT-2) to unscramble the scrambled TV chan-
nels.
1. Exit the menu.
2. Turn on the decoder power.
To choose a channel in the PROGRAM menu:
3. Display the scrambled TV channel on the TV. Even if the
decoder is working, a scrambled picture appears.
Press
/
/ / button.
4. Display the INSTALL. menu again.
The colour of the programme number that you choose is
changed in the PROGRAM menu and you can view the pic-
ture of that channel.
5. Press
or
button to select DECODER (EXT-2),
then press or button to set to ON
Caution:
Using DELETE or CHANGE item rewrite the current chan-
nel list in the PROGRAM menu. Therefore, the programme
numbers of some of channels will change.
6. Press
or
to select STORE, then press or
button to store it. T-V LINK menu will appear after the
TV stores the setting.
When you complete the settings of PROGRAM menu:
If you have a T-V LINK compatible VCR, press the
but-
ton to display the T-V LINK menu. Then follow the operating
procedure Downloading the data to VCR on page 21 to
transmit the Programme table data to the VCR.
7. Follow the operating procedure Downloading the data
to VCR on page 21 to transmit the revised programme
table data to the VCR.
If you do not want to transmit, press PICTURE button
to exit the menu.
Note:
If you do not have a T-V LINK compatible VCR, press PIC-
TURE button to exit the menu.
You can only use this item if you have a decoder connected
to a T-V LINK compatible VCR to EXT.2 terminal. Setting this
item to ON by mistake causes the picture/sound of a TV
channel you are currently viewing to disappear.
To change a programme number (CHANGE):
1. Select a channel that you want to change its programme
number.
If this item has been set to ON but the TV channel cannot
be unscrambled, check the following:
2. Press Blue button to enter the CHANGE mode.
Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
3. Press
/
/ / button to select the pro-
gramme number that you want to change the programme
number of the selected channel to.
Can the TV channel be unscrambled with a decoder?
Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.
4. Press Blue button. Two channels of the selected program-
me numbers will be exchanged.
To delete a channel (DELETE):
Program Menu:
1. Select a channel that you want to delete.
You can use the PROGRAM menu to change a programme
number, delete a channel.
2. Press Red button to delete it.
ENGLISH - 26 -
Autostore Menu:
Sleep timer:
The AUTOSTORE function automatically programmes the re- The sleep timer is used to turn the TV off after a defined peri-
ceived channels in your TV's programme numbers.
od. Press or button to choose a priod of time after se-
lecting this item. The timer can be programmed between Off
and 120 minutes in steps of 10 minutes. One minute before
the "Sleep timer" function turns the TV off, the remaining
time will be displayed.
Before use this function, please confirm that the LAN-
GUAGE and COUNTRY setting are correct.
1. Press
or
button to select AUTOSTORE
item.
2. Press or button to enter the AUTOSTORE menu.
Child lock:
You can disable the control panel buttons (except the POW-
ER button) with this item.
Press or button to change the setting to ON or OFF
after selecting this item.
When you set this item to ON, the TV can be operated only
by using the remote control handset.
A warning message All prestored programmes will be
erased! appears in a message box.
3. Press button to start the AUTOSTORE function.
To cancel the AUTOSTORE function, press the PIC-
TURE button.
Warning: If Child Lock item is set to ON, the TV can not be
operated by VCR.
Setting External Source Output:
You can use this menu to select the internal or external
source that will be output at EXT.2 (EXT-2) terminal.
In the FEATURE menu select EXT-2 Output using
or button. Then select the source you want to be out-
put at EXT-2 pressing or button (one of the sources:
TV, EXT-1 or EXT-3 (Front AV).
Blue Background During No-Signal:
The Blue Back feature can be set by or button to ei-
ther On or Off.
4. After the AUTOSTORE is finalized, the PROGRAM menu
appears.
Please see Program Menu on above section.
Feature Menu
Press MENU button, now you are in main menu. In the
main menu, select FEATURE, using
or
button.
Then enter the feature menu pressing or button.
ENGLISH - 27 -
When you are operating the VCR, set the switch to the VCR
position.
Other Features
DVD:
Sound Mute
When you are operating the DVD player, set the switch to the
DVD position.
To cut off the sound of the TV press button. The sound
will be cut off. To cancel mute, press or or but-
ton. The volume level will be the same as the level before
(Text):
When you are viewing Teletext programmes, set the switch to
mute if you cancel mute pressing button again.
the
(Text) position.
2. Press the VCR / DVD Control Button to control your VCR
or DVD player.
Stereo / Bilingual
If the TV channel you are watching broadcasts in two lan-
guages (e.g. Eurosport), you can select the dubbed or the
Note:
If your device is not made by JVC, these buttons cannot be
used.
original language, pressing the button.
When the stereo broadcast is received poorly, you can
change from stereo to mono sound so that you can hear the
broadcast more clearly and easily.
Even if your device is made by JVC, some of these buttons
or any one of the buttons may not work, depending on the
device.
You can use the
/
buttons to choose a TV channel
which the VCR will receive or choose the chapter which the
DVD player plays back.
Some DVD player models use the
/
buttons for operat-
ing of Fast forward/backward functions and choosing the
chapter. In this case, the
work.
/
the buttons do not
Teletext
Information on Screen
Teletext is an information system that displays text on your
TV screen. Using the Teletext information system you can
view a page of information on a subject that is available in the
list of contents (index).
First pressing the
button displays the current status
Programme number, Station name and Sound sta-
tus.
No on screen display will be available in text mode.
Pressing this button again displays the current time.
While no teletext information available in the selected pro-
gramme, if you press (teletext) button,No Teletext
Transmission warning appears at the center of the screen.
Pressing this button once more remove the on-screen dis-
play.
To Display the Time
No contrast, brightness or colour control, but volume control
is available in text mode.
While watching a TV programme with Teletext transmission
To operate Teletext
press
button twice. The current time information, cap-
Select a TV station on which Teletext is being transmitted.
tured from Teletext will be displayed at the upper left corner
of the screen.
Press (teletext) button. Usually the list of contents (in-
dex) is displayed on the screen.
If the programme being watched does not have Teletext
transmission, no time information will be displayed.
Set the VCR /
/ DVD switch to the
(Text) position.
The time information will disappear after pressing
ton again.
but-
Picture
You can change Picture Mode settings by pressing PIC-
TURE button when no menu appears.
VCR / DVD Control Buttons and VCR /
Switch
/ DVD
The buttons can be used to operate a JVC brand VCR or
DVD player. Pressing the button having the same appearance
as the original remote control button of a device makes the
function work in the same way as the original remote control.
To select a page of Teletext
Press the appropriate digit buttons for the required Teletext
page number.
1. Set the VCR /
/ DVD Switch to the VCR or DVD posi-
tion.
The selected page number is displayed at the top left corner
of the screen. The Teletext page counter searches until the
selected page number is located, so that the desired page is
displayed on the screen.
VCR:
ENGLISH - 28 -
Teletext page number will be displayed on the upper left cor-
ner of the screen when the selected page is found.
Press
one page at a time.
button to move the Teletext screen forward
Press button to display the selected Teletext page.
To exit Teletext
Press
one page at a time.
button to move the Teletext screen backward
Press button. The screen will switch to TV mode.
Fastext and Toptext
Teletext mode will be selected according to transmission au-
tomatically.
Your CTV supports the 7 page Teletext system. When the
page number of any of the 7 pages in memory is entered, the
system will not search for the requested page; instead it will
display the page automatically.
To Select Index Page
Press
button to move the Teletext screen forward
To select the page number of the index (generally page
100), press button.
one page at a time.
Press
button to move the Teletext screen backward
Searching for a teletext page while watching TV
one page at a time.
For Fastext and Toptext:
In the Teletext mode pressing button will switch the
screen to the TV mode. In the TV mode enter a page num-
ber using digit buttons. As you enter last digit of page num-
ber, sign will replace the page number and flash until
the entered page number is found. Then the page number
will replace sign again. Now you can display this tele-
text page pressing button.
The subject-heading for the information may have a particular
colour or can be in a form located in a coloured box.
Press an appropriate RED, GREEN, YELLOW or BLUE but-
ton in order to reach the relevant page quickly.
For TOPTEXT:
If Toptext transmission is present, colour coded buttons will
appear in status row.
To Select Double Height Text
Press button for the top half of the information page to
be displayed in double height text.
If Toptext transmission is not present, status row will not ap-
pear.
Press button again for the bottom half of the informa-
tion page to be displayed in double height text.
In Toptext mode the
or
commands will request
the next or previous page respectively. If Toptext transmission
is not available, in case of operation of these commands,
wraparound occurs. For example page 100 appears to be one
greater than page 199.
Press button once more for the full page of normal
height text.
To Reveal concealed Information
Pressing button once will reveal answers on a quiz or
games page.
Pressing button again will conceal the revealed an-
swers.
To Stop Automatic Page Change
The teletext page you have selected may contain more infor-
mation than what is on the screen; the rest of the information
will be displayed after a period of time.
Press button to stop the automatic page change.
Press button again to allow the next page to be dis-
played.
To Select a Subcode Page
Subcode pages are subsections of long Teletext pages that
can only be displayed on the screen one section at a time.
Select the required Teletext page.
Press
button.
Select the required subcode page number by pressing four
digit buttons (e.g. 0001).
If the selected subcode page is not displayed in a short
time, press button. TV programme will be displayed on
the screen.
ENGLISH - 29 -
NTSC Playback
Connect the External Equipments
Connect a NTSC video recorder to a terminal. Then press
AV button to select the corresponding AV mode.
Via the Euroconnector
NTSC 3.58/4.43 system is detected automatically in AV
mode.
Your TV set has two Euroconnector sockets. If you want to
connect equipments (e.g. video recorder, decoder, etc.) which
have Euroconnectors, to your TV, use the EXT.1 (EXT-1),
EXT.2 (EXT-2) terminals.
Copy Facility
You can output the video and audio signals which inputs from
TV, EXT.1 (EXT-1) or Front AV (EXT-3) terminal to the video
recorder connected to the EXT.2 (EXT-2) terminal.
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the
EXT.2 terminal. If not, the T-V LINK function will not work
properly.
To select the output source, see Setting External Source
Output on page 27.
When connecting a T-V LINK compatible VCR to the EXT.2
terminal, be sure to connect the decoder to the VCR. If not,
the T-V LINK function may not work properly. And then set
the DECODER (EXT-2) function for the channel to ON to un-
scramble a scrambled channel. For details, see Using the
Decoder (EXT-2) function on page 26.
Connecting Headphones
Use the stereo headphone socket of your TV, to connect
headphones. As soon as you connect your headphone to the
headphone socket, TVs loudspeakers will automatically
mute.
RGB mode
If an equipment can output the RGB signals, connect it to the
EXT-1 (EXT.1) terminal.
EXT-2 S Mode
If the equipment connected to your TV set supports S-Video
(Y/C) output from Euroconnector, you can have a better pic-
ture quality by selecting EXT-2 S mode and connecting your
equipment to the EXT.2 (EXT-2 S) terminal of TV. See your
equipment's booklet to check if your equipment has such fea-
ture.
Via the RCA jacks
If you have an equipment (such as a Camcorder) which has
the RCA jacks, connect it to the Front AV (EXT-3) terminal
with the video and audio cables.
If the epuipment has the mono audio jack, connect it to the
AUDIO-L jack.
Via the ANT (aerial) socket
If your equipment does not have a Euroconnecter or RCA
jacks, connect it to the TV with an aerial cable. For details,
see the manual provided with the equipment.
To store the test signal that comes from the equipment in a
programme number, follow the instructions of "Tuning
menu" on page 24. The programme number 0 is usually
used for the external equipment.
After storing, you can watch images from the equipment by
selecting the programme number which you stored the test
signal.
TV and Video Recoder (VCR)
Connect the Video Recorder to the ANT (antenna input)
socket of the TV with the aerial cable.
Connect the Video Recorder to the EXT.1 or EXT.2 terminal
with the SCART cable, or connect it to the Front AV
(EXT-3) terminal with the audio and video cables.
When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the Mode set-
ting in the TUNING menu. (See the Tuning Menu on
page 24.)
ENGLISH - 30 -
Connect the External Equipments
Before connecting anything
Switch off all equipments including the TV.
Read the manuals provided with the equipments.
To select an AV mode
Pressing AV button on the remote control selects one of AV modes (EXT-1, EXT-2, EXT-2 S and EXT-3).
To return to the TV mode, repeatedly press AV button.
EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART)
Video input, Audio L/R inputs and RGB inputs are available.
TV broadcast outputs (Video and Audio L/R) are available.
EXT.2 (EXT-2) terminal: Euroconnector (21-pin, SCART)
Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
Video and Audio L/R outputs are available. (see Setting External Source Output on page 27.)
T-V LINK functions are available. (see T-V LINK compatible VCR on page 30.)
Front AV (EXT-3) terminal: RCA connectors x 3
Video input and Audio L/R inputs are available.
ENGLISH - 31 -
Tips
Specifications
Care of the Screen
TV BROADCASTING
Clean the screen with a slightly damp, soft cloth. Do not use
abrasive solvents as they may damage the TV screen coating
layer.
PAL SECAM B/G D/K L/L
RECEIVING CHANNELS
VHF (BANDI/III)
Poor Picture
Have you selected the correct TV system? Is your TV set or
house aerial located too close to the loudspeakers, non-
earthed audio equipment or neon lights, etc. ?
UHF (BAND U)
HYPERBAND
CABLE-TV
(B/G: S01-S41 / S75-S79
Mountains or high buildings can cause double pictures or
ghost images. Sometimes you can improve the picture quali-
ty by changing the direction of the aerial.
D/K: S01-S19, S22-S41
L: S01-S41 / S75-S77)
The picture quality may degrade when two peripherals are
connected to the TV at the same time. In such a case, dis-
connect one of the peripherals.
NUMBER OF PRESET CHANNELS
200
No Picture
CHANNEL INDICATOR
Is the aerial connected properly? Are the plugs connected
tightly to the aerial socket? Is the aerial cable damaged? Are
suitable plugs used to connect the aerial? If you are in doubt,
consult your dealer.
On Screen Display
RF AERIAL INPUT
No Picture means that your TV is not receiving any trans-
mission. Have you pressed the correct buttons on the remote
control? Try once more.
75 Ohm (unbalanced)
OPERATING VOLTAGE
Sound
220-240V AC, 50 Hz.
Sound is coming from only one of the speakers. Is the bal-
ance set to one direction extreme? See SOUND menu.
SOUND-MULTIPLEX SYSTEMS
Remote Control
Nicam + German Stereo
Your TV no longer responds to the remote control. Press the
PICTURE button on the remote control once more. Perhaps
the batteries are exhausted. If so you can still use the local
buttons at the front of your TV.
PICTURE TUBE
28 4:3
Have you selected the wrong menu? Press PICTURE button
to return to TV mode or press MENU button to return to the
previous menu.
AUDIO OUTPUT POWER (WRMS.) (%10 THD)
2 x 10
No solution
POWER CONSUMPTION (W) (max)
Switch your TV set off and on. If this does not work, call the
service personnel; never attempt to repair it yourself.
150 Watt
DIMENSIONS (WxHxD) (mm)
ENGLISH - 32 -
|