Contents
Safety precautions
Preparation
2
2
2
3
4
5
6
COLOUR TELEVISION
...
1 Insert the batteries into the remote control
...
Connecting the aerial and external devices
2
........................
INSTRUCTIONS
3 Connecting the power cord
..............................................
4 SETUP TOUR
Thank you for buying this JVC
colour television.
To make sure you understand how to
use your new TV, please read this
manual thoroughly before you begin.
Basic operation
Remote control buttons and functions 7
.....................................
ECO SENSOR button
7
7
7
8
8
8
8
8
9
9
.............................
...............................
.............................................
COLOUR SYSTEM button
SOUND SYSTEM button
DISPLAY button
button
CHANNEL SCAN button
MUTING button
OFF TIMER button
RETURN + button
PICTURE MODE button
.......................................................
................................
.............................................
.........................................
..........................................
AV-21W111
.................................
Using the TV’s menus
10
10
11
11
11
12
12
12
12
13
13
13
14
15
15
16
17
18
19
............................................
Basic operation
...........................................................
INPUT
VNR
ON TIMER
AUTO SHUTOFF
...............................................................
.....................................................
..........................................
.................................................
..................................................
CHILD LOCK
BLUE BACK
..........................................
AI ECO DISPLAY
AUTO CH PRESET
.......................................
...............................................
SETUP TOUR
..................................................
LANGUAGE
..................................
..............................................................
MANUAL CH PRESET
SKIP
....................................
Picture Adjustments
TV buttons and parts
Using the buttons on the TV
Troubleshooting
Specifications
GGT0009-001A-H
0703-NIC-JMT
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Preparation
2 Connecting the aerial and external devices
• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either
jack is output through both. You cannot provide input to both the front and rear jacks at the
same time. Disconnect one input, or use one of the jacks as an output jack only (for
monitoring or recording).
■ Connecting the aerial and VCR
Connecting the aerial
(1)
VHF/UHF outdoor aerial
Matching
aerial
adapter
(supplied)
(2)
(3)
VIDEO AUDIO
IN
OUT
Connecting the aerial and VNR
VHF/UHF outdoor aerial
2
VIDEO AUDIO
IN
OUT
3
To video
output
To audio
output
To RF
output
1
VCR
To aerial input
3
Preparation
■ Connecting other external devices
To audio
output
To video
output
VIDEO AUDIO
VCR (for playing)
IN
OUT
VCR (for recording)
To audio
input
To video
input
To video
output
Camcorder
or
To audio
output
TV game
VIDEO AUDIO
IN
MENU
Headphones
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
3 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
4
Preparation
4 SETUP TOUR
When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo
is displayed. Follow the instructions on the on-screen display to perform the SETUP
TOUR.
• In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET
function on the “MENU 3” menu. For details, see page 13.
1 Press the Main power button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the
ON TIMER POWER
TV automatically switches to the
language setting mode.
POWER lamp Main power button
CHANNEL
SCAN
RETURN+
- --
/
0
SETUP TOUR
DISPLAY
MUTING
DISPLAY
button
2 Press the MENU M buttons
to select the on-screen
language.
MENU
/
MENU
MENU –/+
buttons
buttons
CHANNEL
VOLUME
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
When all the TV channels that can
be received on your TV have been
preset, the display goes out and the
AUTO PROGRAMMING function
operation is completed.
• If a TV channel you want to view is not
set to the channel, set it with the
MANUAL CH PRESET function. For
details, see page 14.
EXIT BY
DISPLAY
OPERATE BY -+
3 Press the MENU y button.
The AUTO PROGRAMMING
function will start and the
indicator blinks.
SETUP TOUR
NOW PROGRAMMING
4 Upon the completion of AUTO
PROGRAMMING function, the
message below is displayed.
STOP BY -+
SETUP TOUR
• To stop the AUTO PROGRAMMING
function, press the MENU m
buttons.
THANK YOU!
5
Basic operation
1 Press the POWER button to turn
your TV on.
RM-C365GY
• If your TV does not turn on, press the
Main power button on the TV then press
the POWER button again.
ECO
POWER
SENSOR
• You can also turn on your TV by pressing
any of the following buttons;
SYSTEM
COLOUR SOUND
PICTURE
MODE
-
-
-
the CHANNEL m button
the Number buttons
1
2
5
8
0
3
6
9
TV/VIDEO
I/II
4
the TV/VIDEO button
OFF
TIMER
7
2 Select a channel.
CHANNEL
SCAN
RETURN+
- --
/
■ Press the CHANNEL m button.
• Up/down selection cannot be selected
for channels to which the SKIP has
been set to “YES”. See page 15.
DISPLAY
MUTING
MENU
■ Press the Number buttons to enter
the channel number.
CHANNEL
VOLUME
• If you want to enter a two-digit
number, press the -/-- button to select
the two digit mode “--”, then enter the
channel number.
REMOTE CONTROL UNIT
RM-C365GY
3 Press the VOLUME M button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your
TV for a long time or if you wish to save
energy.
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 7.
If the sound is not clear:
Press the SOUND SYSTEM button to select
another sound system, see page 7.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 11.
6
Remote control buttons and functions
ECO SENSOR button
COLOUR SYSTEM button
You can adjust this TV so that the screen
automatically adjusts to the optimum
contrast according to the brightness of
your room. This function reduces eye
strain and the power consumption of
this TV.
If the picture is not clear or no colour
appears, change the current colour
system to another colour system.
Press this button to select the colour
system.
In TV mode (channel 1 to 99 and AV):
Press this button to select the desired
mode.
SECAM
AUTO
PAL
AI ECO SENSOR 1:
The AI ECO SENSOR function switches
on.
Usually, it is recommended to watch the
TV in this mode.
In VIDEO mode:
SECAM
AUTO
PAL
NTSC4.43
NTSC3.58
AUTO:
Automatic colour system selection.
AI ECO SENSOR 2:
• If the picture is not normal in the AUTO
mode, change the AUTO mode to another
colour system.
The AI ECO SENSOR function switches
on.
If you feel the screen in the “AI ECO
SENSOR 1” mode is too dark, select this
mode.
SOUND SYSTEM button
If the sound is not clear even when the
picture appears normal, change the
current sound system to another sound
system.
AI ECO SENSOR OFF:
The AI ECO SENSOR function switches
off.
• You can display on the screen the effect of
the AI ECO SENSOR function.
Press this button to select the sound
system.
For details, see “AI ECO DISPLAY” on
page 12.
B/G
I
D/K
• You cannot select any sound system when
in a VIDEO mode.
7
Remote control buttons and functions
DISPLAY button
CHANNEL SCAN button
You can continuously display the current
channel number or VIDEO mode on the
screen.
You can quickly view all TV channels
programmes that you can view on your
TV, and search for the programme you
want to view.
Press this button.
To turn the display off, press this button
again.
1 Press this button to start scanning
TV channels.
The TV channel programmes are each
displayed for several seconds.
• The programmes of TV channels for
which the SKIP function is set to “YES”
are not displayed. (See page 15.)
• When selecting a channel or VIDEO mode
with no input signal, indication of selected
channel or VIDEO mode becomes fixed on
the screen.
• When selecting a channel or VIDEO mode
with no input signal, indication of selected
channel or VIDEO mode becomes fixed on
the screen.
2 When you find the programme you
want to view, press this button
again to stop scanning.
button
MUTING button
You can select one of the two bilingual
sounds in an A2 stereo programme’s
bilingual programme. Press the A2
Bilingual button to select a bilingual
sound.
You can turn the sound off instantly.
Press this button.
To turn the sound on, press this button
again.
: Bilingual I sound
: Bilingual II sound
OFF TIMER button
• The A2 Bilingual function has no effect on
stereo programmes of the A2 stereo
broadcast programme type, although an A2
Bilingual function indicator will appear on
the screen.
You can set the TV to automatically turn
off after a set time.
Press this button to select the period
of time.
• The A2 Bilingual function has no effect on
programmes other than A2 stereo broadcast
programme type, although an A2 Bilingual
function indicator will appear on the screen.
• You can set the period of time to a
maximum of 120 minutes in 10 minute
increments.
• 1 minute before the OFF TIMER function
turns off the TV, “GOOD NIGHT!” appears.
• The A2 Bilingual function has no effect in
Video mode, although an A2 Bilingual
function indicator will appear on the screen.
To display the remaining time, press this
button once.
To cancel the OFF TIMER function,
press this button to set the period of
time to “0”.
• The OFF TIMER function will not turn off
the TV’s main power.
8
Remote control buttons and functions
RETURN + button
PICTURE MODE button
You can set a channel you frequently
view to the Return Channel and you
can view that channel at any time with
one-touch.
You can select one of three picture
adjustment settings as you like.
Press this button to select a mode.
BRIGHT:
Heightens contrast and sharpness.
To set the channel to the Return
Channel:
STANDARD:
Standardizes picture adjustments.
1 Select the channel you want to set
to the Return Channel.
SOFT:
2 Press this button and hold until the
message “RETURN PLUS
Softens contrast and sharpness.
PROGRAMMED!” appears.
• Pressing this button returns all the picture
settings in the “MENU 4” to their default
settings.
• When you turn off the TV, the Return
Channel setting is cancelled.
To view the Return Channel:
Press this button.
• You can view two channels (current channel
and Return Channel) alternately by pressing
this button.
To cancel the Return Channel setting:
Press this button and hold until the
message “RETURN PLUS
CANCELLED!” appears.
If no channel is set to the Return
Channel:
You can view the channel selected right
before the current channel by pressing
this button.
9
Using the TV’s menus
This TV has a number of functions you can operate using the menus. To use all your
TV’s functions fully, you need to understand how to use the menus.
3 Repeatedly press the
MENU T buttons to select
a desired function.
CHANNEL
SCAN
RETURN+
- --
/
0
DISPLAY
MUTING
DISPLAY
button
4 Press the MENU M buttons to
MENU
/
MENU
change function settings.
MENU –/+
buttons
buttons
CHANNEL
VOLUME
Example:
Changes the AUTO
SHUTOFF setting.
REMOTE CONRTOL UNIT
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
OFF
ON
OFF
OFF
ON
⇔
AI ECO DISPLAY
ON
AI ECO DISPLAY
ON
■ Basic operation
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
1 Press the MENU T buttons.
One of the 4 menus is displayed.
• With some functions, the operation
method may differ.
MENU number
5 Press the DISPLAY button to
turn the display off.
MENU
1
•To operate a menu using the buttons on
the front panel of the TV, refer to
“Operating menus” on page 17.
The icon
the left indicates
the currently
on
INPUT
TV
ON TIMER
VNR
PR 1 0:00
ON
selected function.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Repeatedly press the
MENU T buttons to display a
desired menu.
• If you hold down the y button, the next
menu is displayed.
• If the selected function is on the first
line, pressing the r button displays the
preceding menu.
10
Using the TV’s menus
INPUT
ON TIMER
You can view images from VCRs or other
devices connected to your TV.
Your TV will automatically turn on and
tune into the channel you set after the
period of time you set.
1 Press MENU T to display the
“MENU 1” menu, then select
“INPUT”.
1 Press MENU T to display the
“MENU 1” menu, then select
“ON TIMER”.
MENU
1
INPUT
TV
MENU
1
ON TIMER
VNR
INPUT
TV
PR 1 0:00
ON
Channel
No.
ON TIMER
VNR
PR 1 0:00
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
OPERATE BY VOL-+
SELECT BY
PROGRAM BY -+
EXIT BY
DISPLAY
2 Press MENU M to select the
VIDEO mode.
2 Press MENU M to select a channel
you want to view when the TV
turns on.
TV mode changes to VIDEO mode.
3 Press VOLUME M to select the
period of time after which you
want to turn on the TV.
VNR
You can reduce the picture noise.
The ON TIMER function starts.
1 Press MENU T to display the
“MENU 1” menu, then select
“VNR”.
• Each time you press the button, the
period of time changes in 15 minute
intervals (up to 12 hours).
MENU
1
INPUT
ON TIMER
TV
To cancel the ON TIMER function,
press the VOLUME m button to set
the period of time to “0:00”.
PR 1 0:00
ON
VNR
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
4 Press DISPLAY to turn the display off.
• If you turn off the TV’s main power by
pressing the Main power button, the
ON TIMER function is canceled.
2 Press MENU M to select “ON”.
To cancel the VNR function, select
“OFF”.
• If you do not turn off the TV after
starting the ON TIMER function, the
channel will automatically switch to the
channel set for the ON TIMER function.
When the time set for the ON TIMER
function is reached:
The TV automatically turns on and the
channel set for the ON TIMER function
is displayed.
• For safety reasons the TV will automatically
turn off if no operations are made within
approximately two hours after the TV is
turned on with the ON TIMER function.
• The OFF TIMER function and AUTO
SHUTOFF function have priority over the
ON TIMER function.
11
Using the TV’s menus
AUTO SHUTOFF
BLUE BACK
You can set your TV to turn off if no
signals are received for about 15 minutes
or longer after the end of a broadcast.
If no signal is being received or the
signal is very weak, a blue screen
automatically becomes the picture
background.
If you wish to continue viewing the
poor picture, you must set the BLUE
BACK function to “OFF”.
1 Press MENU T to display the
“MENU 2” menu, then select
“AUTO SHUTOFF”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
AI ECO DISPLAY
2
ON
ON
ON
ON
1 Press MENU T to display the
“MENU 2” menu, then select
“BLUE BACK”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
AI ECO DISPLAY
2
ON
ON
ON
ON
2 Press MENU M to select “ON”.
To cancel the AUTO SHUTOFF
function, select “OFF”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
• The AUTO SHUTOFF function does not
turn off the TV’s main power.
2 Press MENU M to select “ON”.
To cancel the BLUE BACK function,
select “OFF”.
• The AUTO SHUTOFF will not work for a
VIDEO mode.
CHILD LOCK
AI ECO DISPLAY
You can disable the front control buttons
of the TV.
You can display on the screen the effect
of the AI ECO SENSOR function.
When this function is set to “ON”, the
TV can be operated using only the
remote control.
Use this function to prevent children from
operating the TV without parental
consent.
1 Press MENU T to display the
“MENU 2” menu, then select
“AI ECO DISPLAY”.
MENU
AUTO SHUTOFF
CHILD LOCK
2
OFF
OFF
OFF
ON
BLUE BACK
AI ECO DISPLAY
1 Press MENU T to display the
“MENU 2” menu, then select
“CHILD LOCK”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
AI ECO DISPLAY
2
2 Press MENU M to select “ON”.
ON
ON
ON
ON
The clover mark indicating the
brightness of your room is displayed
for several seconds each time the
brightness changes. The number of
clover marks displayed on screen
increases as your room becomes
darker.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
To cancel the CHILD LOCK function,
select “OFF”.
• The CHILD LOCK function is canceled
when you turn the power off.
To cancel the AI ECO DISPLAY
function, select “OFF”.
12
Using the TV’s menus
AUTO CH PRESET
SETUP TOUR
You can automatically preset all TV
channels that can be received by your
TV to channels.
You can start the SETUP TOUR function.
1 Press MENU T to display the
“MENU 3” menu, then select
“SETUP TOUR”.
1 Press MENU T to display the
“MENU 3” menu, then select
“AUTO CH PRESET”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M.
JVC logo appears and the SETUP
TOUR function will start.
For details, see page 5.
2 Press MENU M to start the
AUTO CH PRESET function.
“>>>ON SEARCH” is displayed on
the screen.
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO
CH PRESET function operation is
completed.
LANGUAGE
You can select the language for the
on-screen display.
1 Press MENU T to display the
“MENU 3” menu, then select
“LANGUAGE”.
To stop the AUTO CH PRESET:
Press the MENU m buttons.
• The AUTO CH PRESET function does not
preset a TV channel to the AV channel
(channel number 0).
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
• If the TV cannot preset the TV channel
you want to view, preset it manually. For
details, see “MANUAL CH PRESET” on
page 14.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select
language.
The on-screen display indications are
in the selected language.
13
Using the TV’s menus
If the picture is not clear:
MANUAL CH PRESET
You can manually preset desired TV
channels to desired channels.
Fine-tune the TV channel.
1
Press MENU t to select “FINE”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
NO
B/G
SELECT BY
PROGRAM BY -+
FINE
PR 3 VL
EXIT BY
BY VOL-+ DISPLAY
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
2
Hold VOLUME m down to fine-tune
the TV channel so that the best
image is displayed on screen.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
“>” or “<” indicates that the TV is
fine-tuning the TV channel.
2 Press MENU M.
The sub-menu is displayed.
If the sound is not clear:
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
B/G
1
Press MENU t to select “SOUND
SYSTEM”.
SELECT BY
PROGRAM BY -+
SEARCH BY VOL-+ DISPLAY
PR 1 VL
EXIT BY
MANUAL
FINE
SKIP
NO
SOUND SYSTEM
EXIT
B/G
• The channel number is displayed as a
PR number. For example, channel 1 will
be displayed as PR 1. However, the
AV channel will be displayed as AV.
SELECT BY
PROGRAM BY -+
CHANGE BY VOL-+ DISPLAY
PR 3 VL
EXIT BY
2
Press VOLUME m to select the
appropriate sound system.
3 Press MENU M to select the
channel number.
4 Press VOLUME M to start
5 Press MENU T to select
searching for the TV channel.
“MANUAL”.
“>>>” or “<<<” is displayed on the
screen.
When the TV finds a TV channel, the
“>>>” or “<<<” display goes out,
and the TV channel is preset to the
currently selected channel number.
6 Repeat steps 3 to 5 if you want to
preset another TV channel to a
channel.
• If the TV channel you want to preset is
not displayed, repeat step 4 until the TV
finds the TV channel you want to preset.
• To stop the MANUAL CH PRESET
function, press any button other than the
VOLUME m button.
14
Using the TV’s menus
SKIP
Picture Adjustments
You can set undesired channels to be
skipped. Channels set to be skipped
cannot be selected by the CHANNEL m
buttons or the CHANNEL SCAN button.
You can adjust the picture as you like.
1 Press MENU T to display the
“MENU 4” menu.
• Channels to which TV channels have not
been preset are automatically set to be
skipped.
MENU
4
TINT
COLOUR
BRIGHT
CONT.
SHARP
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU T to select an item
2 Press MENU M.
and press MENU M to adjust it.
The sub-menu is displayed.
TINT*
- : Reddish
- : Lighter
- : Darker
- : Lower
- : Softer
+ : Greenish
+ : Deeper
+ : Brighter
+ : Higher
+ : Sharper
COLOUR
BRIGHT
CONT.
3 Press MENU T to select “SKIP”.
MANUAL
FINE
SKIP
NO
SHARP
SOUND SYSTEM
EXIT
B/G
*TINT (tint) is displayed only when
viewing images from NTSC3.58 or
NTSC4.43 colour systems.
SELECT BY
PROGRAM BY -+
YES/NO BY VOL-+ DISPLAY
PR 3 VL
EXIT BY
4 Press MENU M to select the
channel you want to skip.
5 Press VOLUME M to select “YES”.
The channel is set to be skipped.
To cancel the SKIP function, select
“NO”.
6 Repeat steps 4 and 5 if you want to
set another channel to skip.
15
TV buttons and parts
<AV-21W111>
2
3
4
6
7 8 9
1
5
0
ON TIMER POWER
VIDEO AUDIO
IN
MENU
CHANNEL
VOLUME
EXIT
1 Headphone jack
2 VIDEO/AUDIO terminal
3 MENU button
4 CHANNEL m buttons
5 VOLUME m buttons
6 ECO sensor
7 Remote control sensor
8 ON TIMER lamp
9 POWER lamp
0 Main power button
16
Using the buttons on the TV
Basic operation
Operating menus
Check to make sure the CHILD LOCK
function is set to “OFF”. When the
CHILD LOCK function is set to “ON”,
the TV cannot be operated using the
front control buttons. For details,
see “CHILD LOCK” on page 12.
You can operate functions in menus
using the front control buttons on the
TV.
1 Press MENU y to display a menu.
2 Press MENU y repeatedly to
1 Press CHANNEL M to turn the TV
display the menu you want to use.
on from standby mode.
3 Press MENU y to select the desired
2 Press CHANNEL M to select a
function or item.
channel.
4 Press MENU M or VOLUME M to
3 Press VOLUME M to adjust the
carry out the desired operation.
volume.
For details, see the description for
each function.
4 To turn your TV off, press the Main
power button to turn off the TV’s
main power.
5 Press VOLUME M to turn the
menu display off.
To change the TV mode to the VIDEO
mode:
• Press the TV/VIDEO button if the TV has
one. See page 6.
To turn the sub-menu display off:
1
Press MENU y to select “EXIT”.
MANUAL
FINE
• If the TV has no TV/VIDEO button, select
the VIDEO mode with the INPUT function
in “MENU 1”.
SKIP
NO
SOUND SYSTEM
EXIT
B/G
SELECT BY
PROGRAM BY -+
EXIT
PR 3 VL
EXIT BY
BY VOL-+ DISPLAY
2
Press VOLUME m to turn the display
off.
17
Troubleshooting
If there is no picture or the TV does not operate normally, make sure the problem isn’t
due to the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a
service technician.
Cannot turn the TV on
Poor picture
• Press the Main power button on the TV.
• Connect the power cord to the AC outlet.
• Press the COLOUR SYSTEM button to select
another colour system. (see page 7.)
• Adjust the picture settings. (see page 15.)
• Set the Picture mode to STANDARD.
(see page 9.)
The screen turns blue
• Is the BLUE BACK function on?
(see page 12.)
• If noise (snow) totally blocks out the
picture, check the following.
- Have the TV and aerial been connected
properly?
Remote control inoperable
- Has the aerial cable been damaged?
- Is the aerial pointing in the right direction?
- Is the aerial itself faulty?
• Replace the batteries. (see page 2.)
Buttons on front of the TV do not
work
• If the TV or aerial suffer interference from
other equipment, stripes or noise may
appear in the picture. Move any equipment
which can cause interference away from the
TV.
• Switch the CHILD LOCK function off.
(see page 12.)
• If the TV or aerial suffer interference from
signals reflecting from mountains or
buildings, double-pictures (ghosting) will
occur. Change the aerial’s direction or
replace it with an aerial with better
directionality.
TV does not respond immediately
• Press the main power button on the TV to
turn off the main power. Press the main
power button again to turn on the TV. If the
TV returns to a normal state, operation is
normal.
• When a white and bright still image (such
as a white dress) is displayed on the screen,
the white part may look as if it is coloured.
When the image disappears from the screen,
the unnatural colours will also disappear.
The TV turns off suddenly
• Is the OFF TIMER function set to operate?
(see page 8.)
• Is the AUTO SHUTOFF function on?
(see page 12.)
The TV turns on suddenly
• Is the ON TIMER function set to operate?
(see page 11.)
• Have you not performed an operation for
about two hours after the TV was switched
on by the ON TIMER function?
(see page 11.)
If you don’t perform an operation within
about two hours, the TV is automatically
switched off for safety.
The TV channel changes suddenly
• Is the ON TIMER function set to operate?
(see page 11.)
Poor sound
• Press the SOUND SYSTEM button to select
another sound system. (see page 7.)
18
Specifications
TV RF systems
B, G, I, D, K
Colour systems
PAL, SECAM
Channel and frequencies
VHF low channel (VL)
= 46.25 to 168.25 MHz
VHF high channel (VH) = 175.25 to 463.25 MHz
UHF channel (U) = 471.25 to 863.25 MHz
Receives cable channels in mid band (X to Z, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41).
Power input
AC110 to 240V, 50 / 60 Hz
Power consumption
Maximum 90 W, Average 60 W
Screen size (measured diagonally)
Picture tube 549 mm, Visible area 508 mm
Audio output (Rated power output)
5W
Speakers
(6.5 cm x 13 cm) oval x 2
External input / output
INPUT:
OUTPUT:
Headphone jack:
VIDEO input (RCA), AUDIO input (RCA)
VIDEO output (RCA), AUDIO output (RCA)
stereo mini jack (3.5 mm diameter)
Dimensions (W x H x D)
649 mm x 465.5 mm x 471.5 mm
Weight
24.5 kg
Accessories
• Remote control unit: RM-C365GY x 1
• AA / R6 / UM-3 dry cell battery x 2
• Matching aerial adapter x 1
Design and specifications subject to change without notice.
19
JVC SALES & SERVICE (THAILAND) CO., LTD
Head Office & Service Center
10th Floor, Sino-Thai tower, 32/31 Asok Road,
(Sukhumvit 21), Bangkok 10110
TEL: (02)-260-1249-51, (02)-260-1275-6 FAX: (02)-260-1274
Service Center
Soi Sukhumvit 26 Branch, 108 Sukhumvit 26 (Soi Aree), Klongtoan,
Klongtoey, Bangkok 10110
TEL: (02)-204-3004-11 FAX: (02)-204-3033
Norhtern Regional Service Center
3/11 Sam Lan Road (Nha Wat Prasing), Tambol Prasing,
Amphur Muang, Chiang Mai 50000
TEL: (053)-281-441 ~ 2 FAX: (053)-814-547
E-mail : [email protected]
|