Contents
Safety precautions
Preparation
2
3
3
3
4
6
6
7
COLOUR TELEVISION
......
1 Confirm which remote control you have
INSTRUCTIONS
...................................
2 Inserting the batteries
...
Connecting the aerial and external devices
3
Thank you for buying this JVC
colour television.
........................
4 Connecting the power cord
..............................................
5 SETUP TOUR
To make sure you understand how to
use your new TV, please read this
manual thoroughly before you begin.
Basic operation
Remote control buttons and functions 8
.....................................
ECO SENSOR button
8
8
8
8
9
9
9
9
9
10
10
11
11
11
12
12
12
12
13
13
13
14
15
15
16
18
19
.................................
PICTURE MODE button
COLOUR SYSTEM button
SOUND SYSTEM button
.............................
...............................
.............................................
AV-14AMG3
AV-14FMG3
AV-20NMG3
AV-21DMG3
AV-21LMG3
AV-21QMG3
AV-14FMG3B
AV-20NMG3B
AV-21FMG3B
DISPLAY button
..........................................
RETURN + button
CHANNEL SCAN button
................................
.............................................
MUTING button
OFF TIMER button
.........................................
Using the TV’s menus
............................................
Basic operation
.....................................................
ON TIMER
...........................................................
INPUT
VNR
AUTO SHUTOFF
...............................................................
..........................................
.................................................
..................................................
CHILD LOCK
BLUE BACK
....................................
..........................................
...............................................
Picture Adjustments
AI ECO DISPLAY
SETUP TOUR
.......................................
AUTO CH PRESET
MANUAL CH PRESET
..................................
..............................................................
SKIP
LANGUAGE
..................................................
Using the buttons on the TV
Troubleshooting
Specifications
LCT1196-001A-H
0502-Ki-NIC-JMT
© 2002 VICTOR COMPANY OF JAPAN, LIMITED
Safety precautions
WARNING
• To prevent fire or shock hazard, do not expose the TV to rain or moisture.
CAUTION
•Operate only from the power source indicated on the rear of the TV.
•Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by
the mains plug. Do not pull on the power cord.
•Never block or cover the cabinet openings for
ventilation. Never install the TV where good
15 cm
ventilation is unattainable. When installing
this TV, leave spaces for ventilation around
the TV more than the minimum distances
shown in the diagram.
•Do not allow objects or liquid into the
cabinet openings.
10 cm
10 cm
15 cm
•In the event of a fault, unplug the TV and call a service technician. Do not attempt to
repair it by yourself or remove the rear cover.
•The surface of the TV screen is easily damaged. Be very careful with it when handling
the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it
forcefully. Never use any cleaner or detergent on it.
•When you don’t use this TV for a long period of time, be sure to unplug it.
2
Preparation
1 Confirm which remote control you have
Your TV comes with one of the two remote controls shown below. Functions you can
operate differ depending on the type of remote control.
RM-C364GY/RM-C364
RM-C360GY
ECO
POWER
POWER
SENSOR
SYSTEM
COLOUR SOUND
SYSTEM
COLOUR SOUND
PICTURE
MODE
PICTURE
MODE
1
2
5
8
0
3
6
9
1
2
5
8
0
3
6
9
TV/VIDEO
TV/VIDEO
4
4
OFF
OFF
7
7
TIMER
TIMER
CHANNEL
SCAN
CHANNEL
SCAN
RETURN+
RETURN+
- --
/
- --
/
DISPLAY
MUTING
DISPLAY
MUTING
MENU
MENU
CHANNEL
VOLUME
CHANNEL
VOLUME
REMOTE CONTROL UNIT
RM-C364GY
REMOTE CONTROL UNIT
RM-C360GY
2 Inserting the batteries
Correctly insert two batteries, observing the , and
. polarities and inserting the . end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new
batteries.
The supplied batteries are for testing, not regular use.
3
Preparation
3 Connecting the aerial and external devices
• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack
is output through both. You cannot provide input to both the front and rear jacks at the same
time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or
recording).
• The rod aerial is supplied with the AV-14AMG3/AV-14FMG3/AV-14FMG3B.
I Connecting the aerial and VCR
Connecting the aerial
To install rod aerial:
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VHF/UHF outdoor aerial
Indoor aerial
Rod aerial
VIDEO
AUDIO
IN
OUT
• Illustration of AV-14FMG3.
Connecting the aerial and VCR
VHF/UHF outdoor aerial
2
VIDEO
AUDIO
IN
OUT
3
To video
output
To audio
output
To RF
output
1
VCR
To aerial input
• Illustration of AV-14FMG3.
4
Preparation
I Connecting other external devices
To audio
output
To video
output
VIDEO AUDIO
VCR (for playing)
IN
OUT
VCR (for recording)
To audio
input
To video
input
• Illustration of AV-21DMG3.
To video
output
Camcorder
or
To audio
output
TV game
MENU
VIDEO AUDIO
IN
Headphones
• Illustration of AV-21DMG3.
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
5
Preparation
4 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
5 SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is
displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.
•In case of resetting that the reason for such as removal, you can set the SETUP TOUR
function on the “MENU 3” menu. For details, see page 13.
1 Press the Main power button
on the TV.
The POWER lamp or POWER/ON
TIMER lamp lights. After the JVC
ON
TIMER POWER
logo has been displayed, the TV
automatically switches to the
language setting mode.
POWER lamp Main power button
CHANNEL
SCAN
RETURN+
- --
/
0
DISPLAY
MUTING
SETUP TOUR
SETUP TOUR
DISPLAY
button
MENU
/
MENU
MENU –/+
buttons
buttons
CHANNEL
VOLUME
LANGUAGE
ENGLISH
NEXT
EXIT BY
DISPLAY
OPERATE BY -+
2 Press the MENU M buttons to select the on-screen language.
3 Press the MENU y button.
The AUTO PROGRAMMING function will start and the indicator blinks.
SETUP TOUR
NOW PROGRAMMING
STOP BY -+
• To stop the AUTO PROGRAMMING function, press the MENU m buttons.
When all the TV channels that can be received on your TV have been preset, the
display goes out and the AUTO PROGRAMMING function operation is completed.
• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH
PRESET function. For details, see page 14.
6
Basic operation
2 Select a channel.
I Press the CHANNEL m button.
• Up/down selection cannot be selected
for channels to which the SKIP has been
set to “YES”. See page 15.
ECO
POWER
SENSOR
SYSTEM
PICTURE
MODE
I Press the Number buttons to enter
COLOUR SOUND
the channel number.
1
2
5
8
0
3
6
9
TV/VIDEO
• If you want to enter a two-digit number,
press the -/-- button to select the two
digit mode “--”, then enter the channel
number.
4
OFF
7
TIMER
CHANNEL
SCAN
RETURN+
3 Press the VOLUME M button to
- --
/
adjust the sound.
DISPLAY
MUTING
4 To turn your TV off, press the
POWER button.
MENU
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your
TV for a long time or if you wish to save
energy.
CHANNEL
VOLUME
REMOTE CONTROL UNIT
RM-C364GY
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 8.
If the sound is not clear:
Press the SOUND SYSTEM button to select
another sound system, see page 8.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 11.
1 Press the POWER button to
turn your TV on.
• If your TV does not turn on, press the
Main power button on the TV then
press the POWER button again.
• You can also turn on your TV by
pressing any of the following buttons;
- the CHANNEL m button
- the Number buttons
- the TV/VIDEO button
7
Remote control buttons and functions
ECO SENSOR button
COLOUR SYSTEM button
<AV-14AMG3 does not have this function>
If the picture is not clear or no colour
appears, change the current colour system
to another colour system.
You can adjust this TV so that the screen
automatically adjusts to the optimum
contrast according to the brightness of
your room. This function reduces eye
strain and the power consumption of this
TV.
Press this button to select the colour
system.
SECAM
NTSC3.58
AUTO
PAL
NTSC4.43
Press this button to select the desired
mode.
AUTO:
Automatic colour system selection.
AI ECO SENSOR 1:
The AI ECO SENSOR function switches
on.
Usually, it is recommended to watch the
TV in this mode.
• For the colour systems in each country or
region, see the table“Broadcasting systems”
on page 19.
• If the picture is not normal in the AUTO
mode, change the AUTO mode to another
colour system.
AI ECO SENSOR 2:
The AI ECO SENSOR function switches
on.
If you feel the screen in the “AI ECO
SENSOR 1” mode is too dark, select this
mode.
SOUND SYSTEM button
If the sound is not clear even when the
picture appears normal, change the
current sound system to another sound
system.
AI ECO SENSOR OFF:
The AI ECO SENSOR function switches
off.
• You can display on the screen the effect of the
AI ECO SENSOR function.
For details, see “AI ECO DISPLAY” on page 13.
Press this button to select the sound
system.
B/G
I
D/K
M
• For the sound systems in each country or
region, see the table “Broadcasting systems”
on page 19.
PICTURE MODE button
You can select one of three picture
adjustment settings as you like.
• You cannot select any sound system when in
a VIDEO mode.
Press this button to select a mode.
BRIGHT:
Heightens contrast and sharpness.
STANDARD:
Standardizes picture adjustments.
SOFT:
Softens contrast and sharpness.
• Pressing this button returns all the picture
settings in the “MENU 4” to their default
settings.
8
Remote control buttons and functions
DISPLAY button
CHANNEL SCAN button
You can continuously display the current
channel number or VIDEO mode on the
screen.
You can quickly view all TV channels
programmes that you can view on your
TV, and search for the programme you
want to view.
Press this button.
To turn the display off, press this button
again.
1 Press this button to start scanning
TV channels.
The TV channel programmes are each
displayed for several seconds.
• The programmes of TV channels for which
the SKIP function is set to “YES” are not
displayed. (See page 15.)
• When selecting a channel or VIDEO mode
with no input signal, indication of selected
channel or VIDEO mode becomes fixed on the
screen.
RETURN + button
You can set a channel you frequently view
to the Return Channel and you can view
that channel at any time with one-touch.
2 When you find the programme you
want to view, press this button
again to stop scanning.
MUTING button
You can turn the sound off instantly.
To set the channel to the Return
Channel:
Press this button.
1 Select the channel you want to set
to the Return Channel.
To turn the sound on, press this button
again.
2 Press this button and hold until the
message “RETURN PLUS
PROGRAMMED!” appears.
OFF TIMER button
• When you turn off the TV, the Return
Channel setting is cancelled.
You can set the TV to automatically turn
off after a set time.
Press this button to select the period of
time.
To view the Return Channel:
Press this button.
• You can view two channels (current channel
and Return Channel) alternately by pressing
this button.
• You can set the period of time to a maximum
of 120 minutes in 10 minute increments.
• 1 minute before the OFF TIMER function
turns off the TV, “GOOD NIGHT!” appears.
To cancel the Return Channel setting:
Press this button and hold until the
message“RETURN PLUS CANCELLED!”
appears.
To display the remaining time, press this
button once.
To cancel the OFF TIMER function, press
this button to set the period of time to 0.
If no channel is set to the Return
Channel:
You can view the channel selected right
before the current channel by pressing
this button.
• The OFF TIMER function will not turn off the
TV’s main power.
9
Using the TV’s menus
This TV has a number of functions you can operate using the menus. To use all your TV’s
functions fully, you need to understand how to use the menus.
4 Press the MENU M buttons to
change function settings.
CHANNEL
SCAN
RETURN+
- --
/
0
Example:
DISPLAY
MUTING
Changes the AUTO
SHUTOFF setting.
DISPLAY
button
MENU
/
MENU
MENU –/+
buttons
buttons
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
OFF
ON
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
OFF
OFF
ON
CHANNEL
VOLUME
⇔
AI ECO DISPLAY
ON
AI ECO DISPLAY
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
• With some functions, the operation
method may differ.
I Basic operation
1 Press the MENU T buttons.
5 Press the DISPLAY button to turn
the display off.
One of the 4 menus is displayed.
MENU number
•To operate a menu using the buttons on
the front panel of the TV, refer to
“Operating menus” on page 17.
MENU
1
INPUT
TV
The icon
on
ON TIMER
the left indicates
the currently
selected function.
PR 1 0:00
OFF
VNR
SELECT BY
EXIT BY
DISPLAY
OPERATE BY -+
2 Repeatedly press the MENU T
buttons to display a desired
menu.
• If you hold down the y button, the next
menu is displayed.
• If the selected function is on the first line,
pressing the r button displays the
preceding menu.
3 Repeatedly press the MENU T
buttons to select a desired
function.
10
Using the TV’s menus
When the time set for the ON TIMER
function is reached:
ON TIMER
Your TV will automatically turn on and
tune into the channel you set after the
period of time you set.
The TV automatically turns on and the
channel set for the ON TIMER function is
displayed.
1 Press MENU T to display the
“MENU 1” menu, then select
“ON TIMER”.
• For safety reasons the TV will automatically
turn off if no operations are made within
approximately two hours after the TV is
turned on with the ON TIMER function.
MENU
1
TV
• The OFF TIMER function and AUTO
SHUTOFF function have priority over the ON
TIMER function.
INPUT
ON TIMER
PR 1 0:00
OFF
VNR
OPERATE BY VOL-+
SELECT BY
PROGRAM BY -+
EXIT BY
DISPLAY
INPUT
You can view images from VCRs or other
devices connected to your TV.
2 Press MENU M to select a channel
you want to view when the TV turns
on.
1 Press MENU T to display the
“MENU 1” menu, then select
“INPUT”.
3 Press VOLUME M to select the
period of time after which you want
to turn on the TV.
MENU
1
INPUT
TV
ON TIMER
PR 1 0:00
OFF
The ON TIMER function starts.
VNR
• Each time you press the button, the period
of time changes in 15 minute intervals (up
to 12 hours).
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
To cancel the ON TIMER function,
press the VOLUME m button to set the
period of time to “0:00”.
2 Press MENU M to select the VIDEO
mode.
TV mode changes to VIDEO mode.
4 Press DISPLAY to turn the display
off.
VNR (Video Noise Reduction)
• If you turn off the TV’s main power by
pressing the Main power button, the ON
TIMER function is canceled.
You can reduce the picture noise.
1 Press MENU T to display the
• If you do not turn off the TV after starting
the ON TIMER function, the channel will
automatically switch to the channel set for
the ON TIMER function.
“MENU 1” menu, then select “VNR”.
MENU
1
INPUT
TV
ON TIMER
VNR
PR 1 0:00
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
To cancel the VNR function, select
“OFF”.
11
Using the TV’s menus
AUTO SHUTOFF
BLUE BACK
You can set your TV to turn off if no
signals are received for about 15 minutes
or longer after the end of a broadcast.
You can mute the sound and change the
picture into a blue screen while no signals
are received by the TV, or when the
signals are unstable.
1 Press MENU T to display the
“MENU 2” menu, then select “AUTO
SHUTOFF”.
1 Press MENU T to display the
“MENU 2” menu, then select “BLUE
BACK”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
AI ECO DISPLAY
ON
AI ECO DISPLAY
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
2 Press MENU M to select “ON”.
To cancel the AUTO SHUTOFF function,
select “OFF”.
• The AUTO SHUTOFF function does not
turn off the TV’s main power.
To cancel the BLUE BACK function,
select “OFF”.
• To view a broadcast even when the
reception signal is poor, set the BLUE
BACK function to “OFF”.
• The AUTO SHUTOFF will not work for a
VIDEO mode.
• Even when the BLUE BACK function is set
to “OFF”, the sound may not be audible.
CHILD LOCK
You can disable the front control buttons
of the TV.
When this function is set to “ON”, the TV
can be operated using only the remote
control.
Use this function to prevent children from
operating the TV without parental consent.
Picture Adjustments
You can adjust the picture as you like.
1 Press MENU T to display the
“MENU 4” menu.
MENU
4
TINT
COLOUR
BRIGHT
CONT.
SHARP
1 Press MENU T to display the
“MENU 2” menu, then select “CHILD
LOCK”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
2 Press MENU T to select an item
and press MENU M to adjust it.
AI ECO DISPLAY
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
TINT*
- : Reddish
- : Lighter
- : Darker
- : Lower
- : Softer
+ : Greenish
+ : Deeper
+ : Brighter
+ : Higher
+ : Sharper
COLOUR
BRIGHT
CONT.
2 Press MENU M to select “ON”.
SHARP
To cancel the CHILD LOCK function,
select “OFF”.
*TINT (tint) is displayed only when
viewing images from NTSC3.58 or
NTSC4.43 colour systems.
• The CHILD LOCK function is canceled when
you turn the power off.
12
Using the TV’s menus
AI ECO DISPLAY
AUTO CH PRESET
<AV-14AMG3 does not have this function>
You can automatically preset all TV
channels that can be received by your TV
to channels.
You can display on the screen the effect of
the AI ECO SENSOR function.
1 Press MENU T to display the
“MENU 3” menu, then select “AUTO
CH PRESET”.
1 Press MENU T to display the
“MENU 2” menu, then select “AI
ECO DISPLAY”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
OFF
OFF
OFF
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
AI ECO DISPLAY
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to start the AUTO
2 Press MENU M to select “ON”.
CH PRESET function.
The clover mark indicating the brightness of
your room is displayed for several seconds
each time the brightness changes. The
number of clover marks displayed on screen
increases as your room becomes darker.
To cancel the AI ECO DISPLAY
function, select “OFF”.
“>>>ON SEARCH” is displayed on
the screen.
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO CH
PRESET function operation is
completed.
• To switch the AI ECO SENSOR’s mode, see
the “ECO SENSOR button” on page 8.
To stop the AUTO CH PRESET:
Press the MENU m buttons.
• The AUTO CH PRESET function does not
preset a TV channel to the AV channel
(channel number 0).
SETUP TOUR
You can start the SETUP TOUR function.
• If the TV cannot preset the TV channel you
want to view, preset it manually. For details,
see “MANUAL CH PRESET” on page 14.
1 Press MENU T to display the
“MENU 3” menu, then select
“SETUP TOUR”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M.
JVC logo is appear and the SETUP
TOUR function will start.
For details, see page 6.
13
Using the TV’s menus
MANUAL CH PRESET
You can manually preset desired TV
channels to desired channels.
If the picture is not clear:
Fine-tune the TV channel.
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
1
Press MENU t to select “FINE”.
MANUAL
FINE
SKIP
NO
SOUND SYSTEM
EXIT
B/G
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
SELECT BY
PROGRAM BY -+
FINE
PR 3 VL
EXIT BY
LANGUAGE
ENGLISH
BY VOL-+ DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2
Hold VOLUME m down to fine-tune
the TV channel so that the best image
is displayed on screen.
2 Press MENU M.
The sub-menu is displayed.
“>” or “<” indicates that the TV is fine-
tuning the TV channel.
MANUAL
FINE
SKIP
NO
SOUND SYSTEM
EXIT
B/G
If the sound is not clear:
SELECT BY
PROGRAM BY -+
SEARCH BY VOL-+ DISPLAY
PR 1 VL
EXIT BY
1
Press MENU t to select “SOUND
SYSTEM”.
• The channel number is displayed as a PR
number. For example, channel 1 will be
displayed as PR 1. However, the AV
channel will be displayed as AV.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
M
SELECT BY
PROGRAM BY -+
CHANGE BY VOL-+ DISPLAY
PR 3 VL
EXIT BY
3 Press MENU M to select the
channel number.
2
Press VOLUME m to select the
appropriate sound system.
4 Press VOLUME M to start
searching for the TV channel.
•For the sound systems in each country
or region, refer to the table
“Broadcasting systems” on page 19.
“>>>” or “<<<” is displayed on the
screen.
When the TV finds a TV channel, the
“>>>” or “<<<” display goes out,
and the TV channel is preset to the
currently selected channel number.
5 Press MENU T to select
“MANUAL”.
6 Repeat steps 3 to 5 if you want to
preset another TV channel to a
channel.
• If the TV channel you want to preset is not
displayed, repeat step 4 until the TV finds
the TV channel you want to preset.
• To stop the MANUAL CH PRESET function,
press any button other than the VOLUME
m button.
14
Using the TV’s menus
SKIP
LANGUAGE
You can set undesired channels to be
skipped. Channels set to be skipped
cannot be selected by the CHANNEL m
buttons nor the CHANNEL SCAN button.
• Channels to which TV channels have not
been preset are automatically set to be
skipped.
You can select the language for the on-
screen display.
1 Press MENU T to display the
“MENU 3” menu, then select
“LANGUAGE”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M.
2 Press MENU M to select
The sub-menu is displayed.
language.
3 Press MENU T to select “SKIP”.
The on-screen display indications are
in the selected language.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
M
SELECT BY
PROGRAM BY -+
PR 3 VL
EXIT BY
YES/NO BY VOL-+ DISPLAY
4 Press MENU M to select the
channel you want to skip.
5 Press VOLUME M to select “YES”.
The channel is set to be skipped.
To cancel the SKIP function, select
“NO”.
6 Repeat steps 4 and 5 if you want to
set another channel to skip.
15
Using the buttons on the TV
<AV-21DMG3/AV-21LMG3>
ON
TIMER POWER
MENU
CHANNEL
VOLUME
EXIT
3
4
6
9
2
5
7
1
<AV-21QMG3>
ON
TIMER POWER
MENU
CHANNEL
VOLUME
EXIT
3
4
6
9
2
5
7
1
<AV-14FMG3/AV-14FMG3B/AV-20NMG3/AV-20NMG3B/AV-21FMG3B>
MENU
CHANNEL
VOLUME
EXIT
ON TIMER POWER
3
2
4
5
6
7
9
1
<AV-14AMG3>
MENU
CHANNEL
VOLUME
EXIT
+
+
–
–
POWER/
ON TIMER
–
+
1
2
3
5
8
9
1 MENU buttons
7 POWER lamp
When the Main power is on,
• MENU button
• MENU m buttons
the light is red.
2 CHANNEL m buttons
3 VOLUME m buttons
4 AI ECO sensor
8 POWER/ON TIMER lamp
When the Main power is on,
the light is green.
5 Remote control sensor
6 ON TIMER lamp
When ON TIMER function is on,
it is red.
The light is switched on while
ON TIMER function is operating.
9 Main power button
16
Using the buttons on the TV
Basic operation
Operating menus
• Check to make sure the CHILD LOCK
function is set to “OFF”. When the CHILD
LOCK function is set to “ON”, the TV cannot
be operated using the front control buttons.
For details, see “CHILD LOCK” on page 12.
You can operate functions in menus using
the front control buttons on the TV.
1 Press MENU y to display a menu.
2 Press MENU y repeatedly to display
1 Press CHANNEL M to turn the TV
the menu you want to use.
on from standby mode.
3 Press MENU y to select the desired
2 Press CHANNEL M to select a
function or item.
channel.
4 Press MENU M or VOLUME M to
3 Press VOLUME M to adjust the
carry out the desired operation.
volume.
For details, see the description for each
function.
4 To turn your TV off, press the Main
power button to turn off the TV’s
main power.
5 Press VOLUME M to turn the menu
display off.
To change the TV mode to the VIDEO
mode:
To turn the sub-menu display off:
• Select the VIDEO mode with the INPUT
function in “MENU 1”.
1
Press MENU y to select “EXIT”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
M
SELECT BY
PROGRAM BY -+
EXIT
PR 3 VL
EXIT BY
BY VOL-+ DISPLAY
2
Press VOLUME m to turn the display
off.
17
Troubleshooting
If there is no picture or the TV does not operate normally, make sure the problem isn’t due
to the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a service
technician.
Cannot turn the TV on
Poor picture
• Press the Main power button on the TV.
• Press the COLOUR SYSTEM button to select
another colour system. (see page 8.)
• Connect the power cord to the AC outlet.
• Adjust the picture settings. (see page 12.)
• Set the Picture mode to STANDARD.
The screen turns blue
(see page 8.)
• Is the BLUE BACK function on? (see page 12.)
• If noise (snow) totally blocks out the picture,
check the following.
Remote control inoperable
- Have the TV and aerial been connected
properly?
• Replace the batteries. (see page 3.)
- Has the aerial cable been damaged?
- Is the aerial pointing in the right direction?
- Is the aerial itself faulty?
Buttons on front of the TV do not work
• Switch the CHILD LOCK function off.
• If the TV or aerial suffer interference from
other equipment, stripes or noise may appear
in the picture. Move any equipment which
can cause interference away from the TV.
(see page 12.)
TV does not respond immediately
• If the TV or aerial suffer interference from
signals reflecting from mountains or
buildings, double-pictures (ghosting) will
occur. Change the aerial’s direction or replace
it with an aerial with better directionality.
• Press the main power button on the TV to
turn off the main power. Press the main
power button again to turn on the TV. If the
TV returns to a normal state, operation is
normal.
• When a white and bright still image (such as
a white dress) is displayed on the screen, the
white part may look as if it is coloured. When
the image disappears from the screen, the
unnatural colours will also disappear.
The TV turns off suddenly
• Is the OFF TIMER function set to operate?
(see page 9.)
• Is the AUTO SHUTOFF function on?
(see page 12.)
The TV turns on suddenly
• Is the ON TIMER function set to operate?
• Have you not performed an operation for
about two hours after the TV was switched on
by the ON TIMER function? (see page 11.) If
you don’t perform an operation within about
two hours, the TV is automatically switched
off for safety.
(see page 11.)
The TV channel changes suddenly
• Is the ON TIMER function set to operate?
(see page 11.)
Poor sound
• Press the SOUND SYSTEM button to select
another sound system. (see page 8.)
18
Specifications
TV RF systems
B, G, I, D, K, K1, M
Colour systems
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
External input / output
INPUT:
OUTPUT:
VIDEO input (RCA), AUDIO input (RCA)
VIDEO output (RCA), AUDIO output (RCA)
Headphone jack: stereo mini jack (3.5 mm diameter)
Accessories
• Remote control unit: AV-14AMG3; RM-C360GY
AV-14FMG3/AV-20NMG3/AV-21DMG3/AV-21LMG3/AV-21QMG3;
RM-C364GY
AV-14FMG3B/AV-20NMG3B/AV-21FMG3B; RM-C364
• AA / R6 / UM-3 dry cell battery × 2
• Rod aerial × 1 (AV-14AMG3/AV-14FMG3/AV-14FMG3B only)
Design and specifications subject to change without notice.
Broadcasting systems
System
Colour
Area
Country or Region
Sound
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand,
India, etc.
PAL
B/G
Asia,
Middle
East
China, Vietnam, etc.
PAL
PAL
D/K
I
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
SECAM
NTSC
SECAM
PAL
B/G
M
D/K
D/K
B/G
I
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
Europe
PAL
PAL
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
PAL
B/G
I
PAL
Africa
Nigeria, etc.
PAL
B/G
B/G
Egypt, Morocco, etc.
SECAM
19
|