ENGLISH
FRANÇAIS
NEDERLANDS
CASTELLANO
DEUTSCH
ITALIANO
PORTUGUÊS
AV-28KT1BUF
AV-28KT1SUF
COLOUR TELEVISION
INSTRUCTIONS
TELEVISEUR COULEUR
KLEURENTELEVISIE
TELEVISOR A COLOR
FARBFERNSEHGERÄT
TELEVISORE A COLORI
TELEVISOR A CORES
MANUEL D'INSTRUCTIONS
GEBRUIKSAANWIJZING
MANUAL DE INSTRUCCIONES
BEDIENUNGSANLEITUNG
ISTRUZIONI
INSTRUÇÕES
50088564
©2006 Victor Company of Japan, Limited
0506TKH-VT-VT
Contents
Safety Precautions
1. Power Source
Safety Precautions ..................................................1
Remote Control .......................................................2
TV Buttons and Functions and Rear Panel ..........3
Antenna Connections..............................................3
Preparation...............................................................4
Features....................................................................4
Before Switching on your TV .................................4
Power connection ........................................................... 4
Connections to the RF input socket................................ 4
How to connect other devices ......................................... 4
Inserting batteries into the remote control ....................... 4
The receiver should be operated only from a 220-240V AC,
50 Hz. outlet. Ensure you select the correct voltage setting for
your convenience.
2. Power Cord
The power supply cord should be placed so that they are not
likely to be walked on or pinched by items placed upon them
or against them. Pay particular attention to cord where they
enter the plug, power outlet, and the point where they exit
from the receiver.
3. Moisture and Water
Do not use this equipment in a humid and damp place (avoid
the bathroom, the sink in the kitchen, and near the washing
machine). Do not expose this equipment to rain or water and
do not place objects filled with liquids on it as this may be
dangerous.
Switching the TV ON/OFF.......................................4
ToswitchtheTVon ........................................................ 4
ToswitchtheTVoff......................................................... 4
Initial Settings ..........................................................4
T-VLINK ......................................................................... 5
4. Cleaning
Before cleaning, unplug the receiver from the main supply out-
let. Do not use liquid or aerosol cleaners. Use with soft and
dry cloth.
Basic Operations .....................................................5
Setting the TV ..........................................................6
5. Ventilation
Picture Menu .................................................................. 6
Sound Menu ................................................................... 7
Feature Menu ................................................................. 8
Installation Menu............................................................. 8
Programme Menu ........................................................... 9
The slots and openings on the receiver are intended for ventila-
tionandtoensurereliableoperation.Topreventoverheating,
these openings must not be blocked or covered in anyway.
6. Lightning
Other Features ......................................................10
In case of storm and lightning or when going on holiday, dis-
connect the power cord from the wall outlet.
Picture Mode .................................................................10
Zoom Modes ..................................................................10
VCR Control Buttons .....................................................10
7. Replacement Part
When replacement parts are required, be sure the service tech-
nician has used replacement parts which are specified by the
manufacturer or have the same specifications as the original
one. Unauthorized substitutions may result in fire, electrical
shock, or other hazards.
Teletext ................................................................... 11
Peripheral Equipment Connections ....................12
Tips..........................................................................14
Specifications ........................................................14
8. Servicing
Please refer all servicing to qualified personnel. Do not remove
cover as this may result in electric shock.
9. Flame sources
Do not place naked flame sources on the apparatus.
10. Stand-By
Do not leave your TV stand-by or operating condition when
you leave your house.
Warning!
Any intervention contrary to regulations, in particular, any modi-
fication of high voltage or a replacement of the picture tube
may lead to an increased concentration of x-rays. Any televi-
sion modified in this way no longer complies with license and
must not be operated.
Instructions for waste disposal:
Packaging and packaging aids are recyclable and should prin-
cipally be recycled. Packaging materials, such as foil bag,
must be kept away from children.
Batteries, including those which are heavy metal-free, should
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
- 1 -
Remote Control
= Stand By / Power
0 - 9 = Direct Program
STANDARD Button (Picture Mode Change)
Colour Buttons
RED: Zoom (Picture Size) Change
GREEN: Hyper Sound
MENU = Menu Button
(
) = Cursor Up / Programme Up
) = Cursor Right / Volume +
(
TeletextControlButtons
VCR Control Buttons
(
) = Cursor Down / Programme Down
) = Cursor Left / Volume -
(
AV = AV Button
= Information Button /T-V Link in Program Menu
= Mute
CAUTION
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
- 2 -
TV Buttons and Functions and Rear Panel
Antenna Connections
- 3 -
Preparation
For ventilation, leave a space of at least 10 cm free all around
theset.Topreventanyfaultandunsafesituations,pleasedo
not place any objects on top of the set.
Use this apparatus in moderate climate.
Features
• It is a remote controlled colour television.
• 100 programmes from VHF, UHF bands or cable channels
can be preset.
• It can tune cable channels.
• Controlling the TV is very easy by its menu driven system.
NOTE: Remove batteries from remote control when it is not to
be used for a long period. Otherwise it can be damaged due to
any leakage of batteries.
• It has two Euroconnector sockets for external devices (such
as computer, video, video games, audio set, etc.)
• A2+NICAM Stereo sound system.
•Teletext(Fastext,Toptext).
Switching the TV ON/OFF
• It is possible to connect headphone.
• Direct channel access.
To switch the TV on
Your TV will switch on in two steps:
• A.P.S. (Automatic Programming System).
• All programmes can be named.
• Programme swapping between last watched two programmes.
• Forward or backward automatic tuning.
• Sleep timer.
1- Press the power button located on the front of the TV. Then
the TV switches itself to standby mode and the power lamp
becomes RED located on the lower part of the TV.
2-ToswitchontheTVfromstand-bymodeeither:
Press the “
or,
” button on the remote control,
ꢀꢁ,
• Child Lock.
• Automatic sound mute when no transmission.
Press a digit button on the remote control so that a programme
number is selected,
• When no valid signal is detected, after 5 minutes the TV
switches itself automatically to stand-by mode.
or,
• NTSC Playback.
Press Programme Up or Down buttons on the TV or on the
remote control, so that last switched off programme is se-
lected.
• S-VHS (via SCART)
Before Switching on your TV
The TV will switch on and the power lamp will be GREEN.
Power connection
To switch the TV off
IMPORTANT: The TV set is designed to operate on 220-240V • Press the stand-by button on the remote control, so the TV
AC, 50 Hz.
will switch to stand-by mode and the power lamp will be-
come RED,
•After unpacking, allow the TV set to reach the ambient room
temperature before you connect the set to the mains.
or,
• Press the power button located on the front of the TV, so the
TV will switch off and the power lamp will turn off.
Connections to the RF input socket
• Connect the aerial or cable TV plug to the RF input socket
located at the back of the TV and connect the cable plug
coming out from the TV out socket located at the devices
(VCR, DVB etc.) to this socket as well.
Initial Settings
When the TV is first turned on, it goes into the initial settings
mode. Follow the instructions on the screen display to make
the initial settings.
Note: If the TV does not go into the initial settings mode this is because your TV has
already been turned on for the first time. (Perform “AUTO STORE” (see page 9) in the
PROGRAMME menu.)
How to connect other devices
IMPORTANT: Switch off the TV before connecting any exter-
nal device.
Because this is the first time that TV has been used, there are
no channels stored in the memory.Analogue terrestrial broad-
castingAUTOMATIC PROGRAMMING SYSTEM (A.P.S.) win-
dow is displayed.
Sockets for external connections are at the back and on the
TV. For connection of other devices via Euroconnector refer to
the manuals of the related devices.
Inserting batteries into the remote control
• Remove the battery cover located on the back of the remote
control by gently pulling downwards from the indicated part.
• Insert two AA (R06) or equivalent type batteries inside. Place
the batteries in the right directions as seen below.
• Replace the battery cover.
- 4 -
• If you do not want to start A.P.S., you can cancel it by press-
ing the MENU button on your remote control.
Press “ ” button to start downloading data to VCR. “TRANS-
FER” is displayed in the menu. Transfer bar can only be seen
after APS.
• First select your country by pressing “ ” or “ ” button. This
will affect the sort process in APS.
• By pressing the “ ” or “ ” buttons, come to the Language
item and select the language in which the menus of the TV
will appear. You can see the available languages by pressing
“
” or “ ” button. As soon as you change the language, the
If you do not want to continue press the STANDARD button
to exit the menu.
menu items will be displayed in the selected language.
• To select “ Continue” use “ ” or “ ” button. By pressing
If “FEATURE NOT AVAILABLE” is displayed, download was
not performed correctly. Before trying to download again, check
that:
“
” or “ ” button start the A.P.S.
• When you start A.P.S. the following window will appear on
the screen.
• The VCR power is turned on.
• The VCR is T-V LINK compatible.
• The VCR is connected to the EXT.2.
• The scart cable is fully wired.
Direct REC:
You can easily record to VCR the images that you are watch-
ing on the TV. For details, read the manual for your VCR. Use
your VCR controls. “VCR IS RECORDING” is diplayed. You
can not carry out Direct REC using your TV’s control.
After APS is finalized, a programme list will appear on the
screen. In the programme list you will see the programme
numbers and names assigned to the programmes.
When the VCR is not ready (For example when there is no
tape inserted), “NO RECORDING” is displayed.
If you do not accept the locations and / or the programme
names of programmes, you can change them in Program menu.
For details see PROGRAMME menu on page 9.
When you press the following buttons (
, BACK, SUBTITLE, GUIDE, ZOOM,
number buttons) during recording, a message appears asking
,
, AV, MENU,
,
/
,
If you do not have aT-VLINKcompatibleVCR, press BLUE
button to exit the menu.
if you want to stop recording or not. Press “ ” or “ ” button
IfyouhaveaT-VLINKcompatibleVCRconnectedtotheEXT.2
to stop recording or BLUE button to continue recording.
Do not turn the TV off in the following cases:
terminal, press “ ” button to display T-V LINK menu. Then
follow the operating procedure “Downloading data to VCR” in
thefollowingT-VLINKsection.
• When recording images from an external device connected
to TV (For example camcorder).
• When recording a TV channel after it has been unscrambled
on a decoder.
T-V LINK
WhenaT-VLINKcompatibleVCRisconnectedtotheEXT.2
terminal on the TV, it is easier to set up the VCR and to view
videos.T-VLINKusesthefollowingfeatures:
• When recording a TV channel by using the TV’s output be-
cause the VCR’s own tuner can not properly receive that
channel.
To use T-V LINK functions
TV autopower on/VCR image view:
A “T-V LINK compatible VCR” means a JVC video cassette
recorder with the T-V LINK logo, or with one of the following
logos. For details see your VCR instruction manual.
When the VCR starts playing, the TV automatically turns on
and images from EXT2 appear on the screen.
This function does not happen if your TV’s main power is turned
off. Set your TV’s main power to on (StandBy Mode).
“Q-LINK” (A trademark of Panasonic Corporation)
“Data Logic” (A trademark of Metz Corporation)
“Easy Link” (A trademark of Philips Corporation)
“Megalogic” (A trademark of Grundig Corporation)
“SMARTLINK” (A trademark of Sony Corporation)
Basic Operations
You can operate your TV using both the remote control
and onset buttons.
Downloading data to VCR:
Operation with the buttons on the TV
The VCR will automatically download the registered data on
the TV channels from the TV. This means you do not need to
set up the programme channels on your VCR manually.
Volume Setting
• Press “
-” button to decrease volume or “
+” button to
increase volume, so a volume level scale (slider) will be dis-
played at the middle of the bottom on the screen.
The “T-V LINK” menu will be displayed when you press the
“
” button while PROGRAM menu is displayed.
Programme Selection
• Press “P/CH +” button to select the next programme or “P/
CH -” button to select the previous programme.
- 5 -
Entering Main Menu
Setting the TV
• Press “MENU” button to enter Main menu. In the Main menu
select sub-menu using “P/CH -” or “P/CH +” button and enter
Menu System
the sub-menu using “
usage of the menus, refer to the Menu System sections.
-” or “
+” button. To learn the
Your TV has been designed with a menu system, to provide
an easy manipulation of a multi-function system. The TV is
controlled by choosing the commands, which are displayed
on the screen.
Operation with Remote Control
The remote control of your TV is designed to control all the
functions of the model you selected. The functions will be de-
scribed in accordance with the menu system of your TV.
MAIN MENU
Press the “MENU” button. The MENU will be displayed in the
Functions of the menu system are described in following sec- middle on the screen.
tions.
Toselectasub-menuuse “
” or “ ” button, and press “
”
Volume Setting
or “ ” button.
Press “
+” button to increase volume. Press “
-” button
Use the “MENU” button to go back to the previous programme
when the menu does not appear on the screen.
to decrease volume. A volume level scale (slider) will be dis-
played in the middle at the bottom of the screen.
Picture Menu
Press “MENU” button, now you are in main menu. In the Main
menu, select “Picture” using “ ” or “ ” button, then enter
Programme Selection (Previous or next
programme)
the Picture menu by pressing “ ” or “ ” button.
• Press “
• Press “
” button to select the previous programme.
” button to select the next programme.
Programme Selection (direct access):
Press digit buttons on the remote control to select programmes
between 0 and 9. TV will switch to the selected programme.
To select programmes between 10 - 99, press the digit but-
tons consecutively which programme you want to select (eg.
for programme 27, first press 2 and then 7). When it is late to
press second digit button only the first digit programme will be
displayed. The limit of the delay time is 3 seconds.
Setting Brightness
Example: PR6
press 6, PR12
press 1 and 2.
Press directly the programme number to reselect single digit
programmes.
• As you enter the picture menu, Brightness will be the first
selected option.
• Press “ ” button to brighten the picture.
• Press “ ” button to darken the picture.
Setting Contrast
Contrast is the difference and distribution of light and dark
tones in an image.
• Using “ ” or “ ” button select Contrast.
• Press “ ” button to increase contrast level.
• Press “ “ button to decrease contrast level.
Setting Colour
• Using “ ” or “ ” button select Colour.
• Press “ ” button to increase colour saturation.
- 6 -
• When you watch a picture from your VCR and the picture is
unstable, you may improve it by changing the “VCR MODE”
setting from “OFF” to “ON”.
• Press “ ” button to decrease colour saturation.
Setting Sharpness
• Using “ ” or “ ” button select Sharpness.
• Press “ ” button to sharpen the picture.
• Press “ ” button to soften the picture.
Setting Hue (In AV mode only)
Reset
Press BLUE button to reset the picture modes to factory de-
fault settings.
To Store the Settings
In the Picture Menu, all settings are stored automatically.
Sound Menu
(During Playback NTSC system, this will appear in AV mode
only when NTSC video source is applied. Otherwise, HUE
option is invisible in Picture menu.):
• Press “MENU” button, now you are in MENU. In the MENU,
select SOUND using “ ” or “ ” button, then enter the sound
• Using “ ” or “ ” button select Hue.
• Press “ ” button to increase the green tones.
menu by pressing “ ” or “ ” button.
• Press “ ” button to increase the red tones.
Center value is indicated with two reciprocal arrows.
Setting Picture Mode
This item is used to change the picture mode. By pressing
Setting Volume
“
” or “ ” button you may select one of these options: STAN-
As you enter the sound menu, Volume will be the first se-
lected option.
DARD, SOFT and BRIGHT.
You can also set the Picture Mode by pressing the Blue but-
ton directly.
• Press “ ” button to increase volume.
• Press “ ” button to decrease volume.
Setting Colour Temp
Or you can directly change the volume settings using “
+”
This item is used for white colour tint adjustment. By pressing
(to increase) or “-
” (to decrease) button.
“
” or “ ” button you may select one of these options: COOL,
NORMAL, WARM.
Setting Balance
Setting VNR (Video Noise Reduction)
It allows adjusting the distribution between the left and right
speakers.
This item is used to reduce the image noise and improve the
picture quality at weak signals.
• Using “ ” or “ ” button select Balance.
• Press “ ” button to change balance to the right.
• Press “ ” button to change balance to the left.
• Using “ ” or “ ” button select VNR.
• Press “ ” or “ ” button to set VNR level to OFF, MIN,
AUTO or MAX.
When balance control is in mid position, the cursor is dis-
played with two reciprocal arrows.
AUTO adjusts the VNR level to OFF, MIN or MAX automati-
cally according to the intensity of the noise.
Selecting Sound Mode
• Using “ ” or “ ” button select Sound Mode.
• Press “ ” or “ ” button to change Mode.
You can select MONO, STEREO, DUAL-I or DUAL-II mode,
only if the selected channel supports that mode.
In case of bilingual broadcast (Dual Sound), you can select
original or dubbed language using mode option.
Setting Bass Level
• Using “ “ or “ ” button select Bass Level.
• Press “ ” button to increase bass level.
• Press “ “ button to decrease bass level.
Setting VCR Mode (In AV mode only)
• Using “ ” or “ ” button select VCR Mode.
- 7 -
Setting Treble Level
Ext-2 Output
• Using “ “ or “ ” button select Treble
• Press “ ” button to increase treble level.
• Press “ “ button to decrease treble level
• Using “ ” or “ ” button select Ext-2 Output.
• Press “ ” or “ ” button to select the source which will be
given. From Ext-2 output, either EXT-1, EXT-3 or TV can be
selected.
To Store the Settings
Blue Back
In the Sound Menu, all settings are stored automatically.
Feature Menu
You can set the TV to automatically change to a blue screen
if the signal is weak or absent, or when there is no input from
an external device.
• Press “MENU” button, now you are in MENU. In the MENU,
select Feature using “ ” or “ ” button. Then enter the
The Blue Background feature can be turned on or off by press-
ing “ ” or “ ” button.
Feature menu by pressing “ ” or “ ” button.
To Store Settings
In Feature menu all settings are stored automatically.
Installation Menu
• Press “MENU” button, now you are in MENU. In the MENU,
select INSTALLATION using “ ” or “ ” button. Then enter
the Installation menu by pressing “ ” or “ ” button.
Sleep Timer
As you enter the Feature menu, Sleep Timer will be the first
selected option. Use “ ” or “ ” button to change the Sleep
Timer values between OFF, 10, 20, 30, ......, 110 and 120.
If sleep timer is activated, at the end of the selected time, the
TV goes automatically to stand-by mode.
You can also set the Sleep Timer by pressing the Yellow but-
ton directly.
Selecting Programme
Child Lock
You can use this feature to prevent children turning the TV on
or changing programs or adjustments etc. without remote con-
trol.
Toselectprogrammenumber,youcanuse“
or Digit Buttons.
” or “ ” button
Selecting Band
The Child Lock feature can be set by “ ” or “ ” button to
either ON or OFF. When OFF is selected, there will be no
difference in the operation of your TV. When ON is selected,
the TV can only be controlled by the remote control handset.
In this case, the front panel buttons (except the Power On/Off
button) will not work.
BAND, can be selected either “C” or “S” by pressing “ ” or
” button.
“
Selecting Channel
CHANNEL can be changed by “ ” or “ ” button or Digit But-
tons.
If Child Lock is ON, when one of the front panel buttons (ex-
cept power button) is pressed, “CHILD LOCK” OSD is seen
on the screen.
For band C,
01 - 83, WEST EUROPE.
01 - 12, 21 - 69, EAST EUROPE .
01 - 17, 21 - 73, UK.
01 - 76, FRANCE.
Selecting Country
• Using “ ” or “ ” button select Country.
• Press “ ” or “ ” button to select the desired country set-
tings.
04 - 09, FRANCE 2.
For band S,
Selecting Language
01 - 41, for all channel tables.
Menu language can be selected by pressing “ ” or “ ” but-
ton on Language item.
- 8 -
Selecting Standard
STANDARD can be selected BG, I, L or DK by pressing “
”
or “ ” button.
Selecting Colour System
Using “ ” or “ ” button on Colour System, you can change
the colour system to PAL, SECAM or AUTO.
Note: In EXT mode, you can choose NTSC 3.58 and NTSC
4.43 as well.
Selecting Decoder (EXT2)
You can use this mode to connect any decoder to your TV.
• Press the “ ” or “ ” buttons to turn it on or off.
Moving cursor to four directions you can reach 30 programmes
in the same page. You can scroll the pages up or down by
pressing the navigation buttons.
WhenyouturnDecoderon,EXT-2outputwillbechosenasTV
mode only and any scrambled channels will be unscrambled
through decoder connected your TV via EXT-2 output.
By cursor action, programme selection is done automatically.
Selected programme is displayed with “HIGHLIGHTED” char-
acters.
Decoder setting should be stored separately for each
programme.
Programme Number is between 00 and 99. Programme Name
has a name string with 5 characters. After autostore process
the Programme Names are set to:
Selecting Fine Tuning
YoucanusetheFineTuningprocessforfineadjustment(after
coarse adjustment), if you are not happy with the image on
the screen.
• Channel search “C01” or “S01” (band and channel number),
as default.
At the bottom of the menu there is a programme sort functions
section. Each function is activated by a colour button. NAME,
changes the programme name. DELETE, deletes undesired
programmes. INSERT, inserts a programme into another
programme’s position. By selecting AUTOSTORE, Autostore
menu will be available.
Use “ ” or “ ” button on FINE TUNING item, until getting
the best image on the screen.
In Channel option, normally the Fine Tuning cursor is placed
at the middle on the slider, and this is indicated with two recip-
rocal arrows.
NAME:
Selecting Search
You can change the name of a selected programme by press-
ing the RED button (NAME). First letter of the selected
programme is displayed with a highlighted character. To
change that letter “ ” or “ ” button can be used, and to
• Using “ ” or “ ” button select Search item.
• Press “ ” or “ ” button in order to start channel search.
“SEARCHING...” is displayed during the search process.
Searching is stopped as soon as a station is found or “ ”,
select the other letters, “ ” or “ ” button can be used.
“
”, “ ”, “ ” buttons are pressed.
After changing the name, press the RED button to store the
new name or press the BLUE button to cancel.
To Store Settings
INSERT:
• Using “ ” or “ ” button select Store.
When the GREEN button (INSERT) is pressed, “NAME”,
• Press “ ” or “ ” button to store Installation menu settings. “AUTOSTORE” and “DELETE” functions are erased and the
selected programme is displayed with green characters. Use
the navigation buttons to select another programme’s posi-
Programme Menu
tion. When the GREEN button is pressed again, the first se-
lected programme will be inserted into the position of the cur-
rent selection.
• Press “MENU” button, now you are in MENU. In the MENU,
select PROGRAMME using “ ” or “ ” button. Then enter
the Program menu by pressing “ ” or “ ” button.
Press the BLUE button to cancel the activated “INSERT” pro-
cess.
DELETE:
Press the YELLOW button to select a programme that you
want to delete. When the YELLOW button is pressed again
the selected programme will be deleted.
Pressing the BLUE button cancels the activated “DELETE”
process.
AUTOSTORE:
(A.P.S. (Automatic Programming System))
A.P.S. searches and sorts all channels and stores them auto-
matically on your TV, according to the transmission of pro-
gramme systems in your area.
ToenterAutostoremenu,pressthe BLUE button.
- 9 -
value, and the second one is increasing or decreasing the
volume level.
No-Signal Detection (TV mode)
If no valid signal is detected, it takes 5 minutes to switch to
the Stand-By mode unless any signal detected or any Re-
mote Control command is accessed.
After a Remote Control command (if No-Signal Timer is active)
the timer stops and if no signal detected again the timer is
initialized to 5 minutes and starts 3 seconds later again to
count down.
• If you do not want to start A.P.S., you can cancel it by press-
ing the Menu button on your remote control.
• First select your country by pressing “ ” or “ ” button.
This will affect the sort process in APS.
It is not valid in EXT modes.
•Toselect“ Continue” use “ ” or “ ” button. By pressing
Volume Bar
“
” or “ ” button start the A.P.S.
It is displayed in the lower middle of the screen. When a vol-
• When you start A.P.S. the following window will appear on
the screen.
ume command is received (pressing “
+” or “
-” by
Remote Control or Control panel at the right side of the TV)
and no menu is active, it stays on the screen for 3 seconds,
after the last volume command or until another command is
received in between.
EXT Modes
By pressing the “AV” button you can switch your TV to EXT
modes (except being in Teletext). Pressing this button con-
secutively will switch the TV in one of the optional EXT modes:
EXT1, EXT2, EXT2 S and EXT3
After APS is finalized, a programme list will appear on the
screen. In the programme list you will see the programme
numbers and names assigned to the programmes.
In order to quit the EXT mode press any digit buttons or “
/ “ ”.
”
If you do not accept the locations and / or the programme
names of programmes, you can change them in Programme
menu.
Picture Mode
You can change Picture Mode settings by pressing “STAN-
DARD” button when no menu appears.
Other Features
TV Status
Zoom Modes
Programme Number, Programme Name (or EXT), (they
are displayed on the upper left of the screen). The sound indi-
cator is displayed with them too. They are displayed after
programme change for 3 seconds.
Zoom mode can be changed by pressing Red button. You can
change the screen size according to the picture aspect ratio.
Select the optimum one from the following ZOOM modes: Auto,
4:3 and 16:9.
Sound Indicator
VCR Control Buttons
The alternatives of the indicator are Mono, Stereo, Dual I and
Dual II. This indicator is displayed under the programme num-
ber indicator on the screen.
The buttons can be used to operate a JVC brand VCR. Press-
ing the button having the same appearance as the original
remote control button of a device makes the function work in
the same way as the original remote control.
In Mono broadcast or in forced-mono (for stereo broadcast).
In Stereo broadcast.
Press the VCR Control Button to control your VCR.
Note:
• If your device is not made by JVC, these buttons cannot be
used.
If dual broadcast detected. Dual I is selected in default and
also can be selected after Dual II by Remote Control.
• Even if your device is made by JVC, some of these buttons
or any one of the buttons may not work, depending on the
device.
• You can use the
which the VCR will receive.
/
buttons to choose a TV channel
If Dual II is selected by Remote Control.
Mute Indicator
It is placed in the upper middle of the screen when enabled,
and it stays there until it is disabled.
Tocancelmute,therearetwoalternatives;thefirstoneisby
pressing the “ ” button, this volume is set to the preceding
- 10 -
To Stop Automatic Page Change
Teletext
The teletext page you have selected may contain more infor-
mation than what is on the screen; the rest of the information
will be displayed after a period of time.
Teletext is an information system that displays text on your
TV screen. Using the Teletext information system you can
view a page of information on a subject that is available in the
list of contents (index).
• Press “ ” button to stop the automatic page change.
• Press “ ” button again to allow the next page to be dis-
played.
On screen display is not available in text mode.
Contrast, brightness or colour control is not available, but vol-
ume control is available in text mode.
To Select a Subcode Page
To operate Teletext
Subcode pages are subsections of longTeletext pages that
can only be displayed on the screen one section at a time.
• Select a TV station on which Teletext is being transmitted.
•SelecttherequiredTeletextpage.
• Press (TELETEXT) “ ” button. Usually the list of contents
(index) is displayed on the screen.
• Press “
” button.
• Select the required subcode page number by pressing four
digit buttons (e.g. 0001).
• If the selected subcode page is not displayed in a short time,
press “ ” button. TV programme will be displayed on the
screen.
•Teletextpagenumberwillbedisplayedontheupperleftcor-
ner of the screen when the selected page is found.
• Press “ ”buttontodisplaytheselectedTeletextpage.
To exit Teletext
To select a page of Teletext
•PresstheappropriatedigitbuttonsfortherequiredTeletext
page number.
• Press “ ” button. The screen will switch to TV mode.
Fastext and Toptext
The selected page number is displayed at the top left corner of
the screen. The Teletext page counter searches until the se-
lected page number is located, so that the desired page is
displayed on the screen.
Your TV supports the 7 page Teletext system. When the page
number of any of the 7 pages in memory is entered, the sys-
tem will not search for the requested page; instead it will dis-
play the page automatically.
• Press “
”buttontomovetheTeletextscreenforwardone
page at a time.
• Press “
”buttontomovetheTeletextscreenforwardone
page at a time.
• Press “
”button tomovetheTeletextscreenbackward
one page at a time.
• Press “
”buttontomovetheTeletextscreenbackward
one page at a time.
To Select Index Page
For Fastext and Toptext
•Toselectthepagenumberoftheindex(generallypage100),
press “ ” button.
The subject-heading for the information may have a particular
colour.
Searching for a teletext page while watching TV
• Press an appropriate RED, GREEN, YELLOW or BLUE but-
ton in order to reach the relevant page quickly.
• In the Teletext mode pressing “
” button will switch the
screen to the TV mode. In the TV mode enter a page number
using digit buttons. As you enter last digit of page number,
For TOPTEXT
IfToptext transmission is present, colour coded buttons will
appear in status row.
“
” sign will replace the page number and flash until the
entered page number is found. Then the page number will
replace “ ” sign again. Now you can display this teletext
page by pressing “ ” button.
IfToptexttransmissionisnotpresent, statusrowwillnotap-
pear.
InToptextmodethe“
” or “
” commands will request
To Select Double Height Text
thenextorpreviouspagerespectively.IfToptexttransmission
is not available, in case of operation of these commands, wrap-
around occurs. For example page 100 appears to be one greater
than page 199.
• Press “ ” button for the top half of the information page to
be displayed in double height text.
• Press “ ” button again for the bottom half of the information
page to be displayed in double height text.
ToptexthasaspecialpagecalledHITLIST whichcanbedis-
played by pressing the “ ” button. Use colour buttons on
HITLIST page to select a line which will link you to another
teletext page.
• Press “ ” button once more for the full page of normal height
text.
To Reveal “concealed” Information
• Pressing “ ” button once will reveal answers on a quiz or
games page.
• Pressing “ ” button again will conceal the revealed answers.
- 11 -
Connect a decoder without an aerial socket to the
TV
Peripheral Equipment Connections
There is a wide range of audio and video equipment that can
be connected to your TV.
• Connect the decoder to your TV with a eurocable (RCA Jack
Cable) to EXTERNAL (RCA Jack). When your decoder has a
Euroconnector / RCA Jack you can obtain better picture
quality if you connect a eurocable (RCA Jack Cable) to
EXTERNAL (RCA Jack).
Connection diagrams at the end of this section show you where
the different equipment should be connected at the back side of
the TV.
Via the Euroconnector
TV and Video Recorder (VCR)
Your TV set has 2 Euroconnector sockets. If you want to
connect peripherals (e.g. video, decoder, etc.) which have
Euroconnectors, to your TV, use EXT.1 or EXT.2 input.
• Connect the Video Recorder to theANT (antenna input) socket
of the TV with the aerial cable.
• Connect the Video Recorder to the EXT.1 or EXT.2 terminal
If an external device is connected via Euroconnector sockets,
TV is switched to AV mode automatically. In this case if both
sockets are connected, SCART1 has the precedence.
with the SCART cable.
NTSC Playback
Connect a NTSC video recorder to a terminal. Then press “AV”
button to select the correspondingAV mode.
T-V LINK compatible VCR
BesuretoconnecttheT-VLINKcompatibleVCRtothe EXT.2
terminal. Ifnot, theT-VLINKfunctionwillnotworkproperly.
NTSC 3.58/4.43 system is detected automatically inAV mode.
Camera and Camcorder
•WhenconnectingaT-VLINKcompatibleVCRtotheEXT.2
terminal, be sure to connect the decoder to the VCR. If not,
the T-V LINK function may not work properly. And then set
the Decoder(EXT2) (see page 9) function for the channel to
ON to unscramble a scrambled channel.
To connect to the EXT-3 terminal
Connect your camera or camcorder to the right side of your
TV.
• Connect your equipment to the TV via VIDEO (yellow), AU-
DIO R (red) and AUDIO L (white) inputs. You should connect
the jacks to the input in the same colour.
RGB mode
If an equipment can output the RGB signals, connect it to the
EXT.1 terminal.
Connect the decoder to the video recorder
Some video recorders have a special euroconnector for de-
EXT2S Mode
If the equipment connected to your TV set supports S-Video coder.
(Y/C) output from Euroconnector, you can have a better pic-
• Connect a eurocable to the euroconnector of your decoder
and to the special euroconnector of your video recorder. See
also the handbook of your video recorder.
ture quality by selecting EXT2S mode and connecting your
equipment to the EXT.2 (EXT2S) terminal of TV. See your
equipment’s booklet to check if your equipment has such fea-
ture.
•ToconnectyourvideorecordertotheTV,seeTVandVideo
Recorder section.
Via the RCA jacks
If you want to connect more equipment to your TV, consult
your dealer.
If you have an equipment (such as a Camcorder) which has
the RCAjacks, connect it to the EXT-3 terminal with the video
and audio cables.
Connecting Headphones
Use the stereo headphone socket on the right side of yourTV,
to connect headphones.
Via the ANT (aerial) socket
If your equipment does not have an Euroconnector or RCA
jacks, connect it to the TV with an aerial cable. For details,
see the manual provided with the equipment.
•Tostorethetestsignalthatcomesfromtheequipment,see
“Installation Menu” on page 8 and store it to the program
number 0. You can watch images from that equipment to
select the program number which you stored the test signal.
Decoder
Cable TV offers you a wide choice of programmes. Some of
them are free, others are to be paid for by the viewer. This
means that you will need to subscribe to the broadcasting
organisation whose programmes you wish to receive. This
organisation will supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information ask your dealer. See also the booklet
supplied with your decoder.
Connect a decoder with an aerial socket to the TV
• Connect the aerial cable.
- 12 -
Peripheral Equipments
- 13 -
Tips
Specifications
Broadcasting System
Can not turn the TV on?
PAL SECAM B/G D/K K’ I/I’ L/L’
Check that TV/VCR/DVD switch is set to TV position.
TV may go to stand-by mode when you turn the TV on soon
after you turn the TV off. If you can turn the TV on again, it is
not a problem.
Channels and Frequencies
Analogue: 46.25 MHz - 862.25 MHz (channel 01-17/21-73)
Cable TV: S1 - S41
Can not turn the TV off?
Check that TV/VCR/DVD switch is set to TV position.
Care of the Screen
Sound System
A2+Nicam Stereo
Clean the screen with a slightly damp, soft cloth. Do not use
abrasive solvents as they may damage the TV screen coating
layer.
Power Requirements
220-240 V AC, 50 Hz
Colours of image on screen are abnormal
Power Consumption
105W (Standby < 3W)
Have you selected the correct TV system? Is your TV set or
house aerial located too close to the loudspeakers, non-earthed
audio equipment or neon lights, etc. ?
Picture Tube Size
Mountains or high buildings can cause double pictures or ghost
images. Sometimes you can improve the picture quality by
changing the direction of the aerial.
Viewable area 70 cm.(measured diagonally)
IsthepictureorTeletextunrecognisable?Checkifyouhave
entered the correct frequency.
Audio Output
2x10 W RMS (10% THD)
The picture quality may degrade when two peripherals are
connected to the TV at the same time. In such a case, dis-
connect one of the peripherals.
EXT.1 Terminal
Euroconnector (21-pin, SCART)
No Image on Display Screen
* Video Input, Audio L/R Inputs and RGB Inputs are available.
Is the aerial connected properly? Are the plugs connected
tightly to the aerial socket? Is the aerial cable damaged? Are
suitable plugs used to connect the aerial? If you are in doubt,
consult your dealer.
* Analogue TV broadcast output (Video and Audio L/R) are
available.
EXT.2 Terminal
No Image means that your TV is not receiving any transmis-
sion. Have you pressed the correct buttons on the remote
control? Try once more.
Euroconnector (21-pin, SCART)
* Video Input, S-VIDEO (Y/C) Input, Audio L/R Inputs are avail-
able.
Sound
* Video andAudio L/R outputs are available.
*T-VLINKfunctionsareavailable.
You can not hear any sound. Did you perhaps interrupt the
sound, pressing “ ” button? Are external speakers connected
to the TV?
EXT.3 Terminal
Sound is coming from only one of the speakers. Is the bal-
ance set to one direction extreme? See Sound menu.
RCA connectors x 3
* Video Input andAudio Inputs are available.
Remote Control
Headphone jack
If your TV no longer responds to the remote control, perhaps
the batteries are exhausted. Replace the batteries.
Stereo mini-jack (3.5 mm in diameter)
Have you selected the wrong menu? Press “MENU” button to
return to normal screen.
Dimensions (WxHxD)
No solution
760 mm x 570 mm x 473 mm
If the TV suddenly stops responding, disconnect the power
cord of the TV from the AC outlet. Connect it to the AC outlet
again to turn on the TV. If theTV returns to a normal state, it is
not a failure. If this does not work, switch off, remove the mains
plug and call the service personnel; never attempt to repair it
yourself.
Accessories
Remote control unit x 1 (RM-C1100)
AA/R6 dry cell battery x 2
- 14 -
|