Intel XP P5CM GV User Manual

XP-P5CM-GV/

XP-P5CM-GL

Intel^®Pentium^®4 LGA775 Processor Motherboard

User's Manual

M-050501

Contents

Motherboard Layout .........................................................................4

1. Product Introduction ..................................................................5

1.1. Feature Summary............................................................................. 5

1.2. I/O Back Panel and Connectors&Jumper Setting ........................... 6

1.2.1. I/O Back Panel ....................................................................................... 6

1.2.2. Connectors&Jumper Setting ................................................................ 6

2. HardwareInstallation ............................................................... 10

2.1. Installation of a LGA775 Pentium 4 CPU and Fan Sink................ 10

2.1.1. Installation of a LGA775 CPU ............................................................ 10

2.1.2. Installation of Fan Sink ....................................................................... 11

2.2.

Installation of Memory..................................................................... 12

2.3. Installation of the Graphics Card ................................................... 13

2.4.

What is Axper's G.E.A.R.? ............................................................... 13

2.4.1. Graphics Card Support List ............................................................... 13

3. BIOSSetup ............................................................................ 17

3.1. Setup Screen Features (BIOS version:F1) .................................... 17

3.2. Standard CMOS Features .............................................................. 18

3.3. Advanced BIOS Features ............................................................... 20

3.4. Integrated Peripherals.................................................................... 21

3.5. Power Management Setup ............................................................ 23

3.6. PnP/PCI Configuration ................................................................... 24

3.7. PC Health Status ............................................................................ 25

3.8. Frequency/Voltage Control ............................................................. 26

3.9. Load Fail-Safe Defaults ................................................................. 27

3.10. Load Optimized Defaults................................................................ 27

3.11. Set User Password ........................................................................ 27

3.12. Save & Exit Setup............................................................................ 27

3.13. Exit Without Saving.......................................................................... 27

4. DriverInstallation ..................................................................... 28

Motherboard Layout

KB_MS

CPU_FAN

LGA775

FDD

ATX_12V

ATX

R_USB

Intel 915GV 1/

Intel 915GL2

F_AUDIO

AUDIO

SUR_CEN

IDE1

PCIE_16

BIOS

PCI1

GEAR

RTL8100C

SATA2

SATA0

ICH6

BAT

CODEC

CD_IN

PCI2

CLR_CMOS

PWR_LED

F_USB1

F_PANEL

Only for XP-P5CM-GV.

Only for XP-P5CM-GL.

Product Introduction

The user manual provides steps related to quick installation. If you wish to view complete

product information, please select the " ",open User Manual button located on the driver

CD or link to our website at http://www.axper.com to received the most up-to-date information.

1.1.

CPU

Feature Summary

LGA775 for Intel^®Pentium^®4 Processor

Intel^®Pentium^®4 533/800MHz FSB

L2 cache depends on CPU

Chipset

Memory

North Bridge: Intel^®915GV /GL

South Bridge: Intel^®ICH6

2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max.)

Supports dual channel DDR400/DDR333 DIMM

Supports only 2.5V DDR SDRAM

Slots

1 PCI Express x 16 slot device support *

1 GEAR slot device support

2 PCI slots support 33MHz & PCI 2.2 compliant

1IDE controller provides IDE HDD/CD-ROM with PIO, Bus Master

(Ultra DMA33/ATA66/ATA100) operation modes

Can connect up to 2 IDE devices

On-Board IDE

On-Board Floppy

On-Board SATA

1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and

2.88M bytes

2 Serial ATA ports

On-Board Peripherals 1 Parallel port supports Normal/EPP/ECP mode

1 Serial port (COM1), 1 VGA port

6 USB 2.0/1.1 ports (4 x Rear, 2 x Front by cable)

1 Front Audio connector

1 PS/2 Keyboard

1 PS/2 Mouse

On-Board LAN

Built-in RTL8100C chip

1 RJ45 port

On-Board VGA

On-Board Sound

Built-in Intel^®915GV /GL chipset

ALC655 CODEC

Supports 2/4/6 channel

Line Out / Line In / Mic In

CD In

BIOS

Licensed AWARD BIOS

Supports BIOSNow!

I/O Control

IT8712F

Hardware Monitor

CPU/System fan revolution detect

CPU/System fan fail warning

CPU temperature detect

System voltage detect

Micro ATX size form factor, 23.6cm x 24.3cm

Form Factor

* PCI Express x 16 card runs up to x 4 mode

Only for XP-P5CM-GV. Only for XP-P5CM-GL.

1.2.

I/O Back Panel and Connectors&Jumper Setting

I/O Back Panel

1.2.1.

Parallel Port

LAN

PS/2 Mouse

Line In

Line Out

MIC In

USB

PS/2 Keyboard

COM1

VGA

USB

Connects PS/2 standard keyboard and PS/2 standard

mouse

PS/2 Mouse connector

Parallel port (LPT)

Connects to printer

COM1 (Serial port)

Connects to serial-based mouse or data processing de-

vices

VGA port

USB

Connects to 15-pin D-Sub device such as a monitor

Prior to use, please make sure that your system as well

as the connected attachments support the USB interface.

If driver installation is required, please consult the USB

section of the user manual.

(Universal Serial Bus Port)

LAN (RJ45 LAN Port)

Line In

Internet connection with speed of up to10/100Mbps

Connects to optical devices, CD players and other audio

input devices

Line Out

MIC In

Connects to speakers or headphones

Connects to microphone

1.2.2.

Connectors&Jumper Setting

FDD (Floppy Disk Drive Connector)

The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one

edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the

connector.

IDE (IDE Connector)

The IDE connector is able to connect two IDE devices via an IDE cable and requires checking

of the IDE jumper setting.

CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector)

The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(only for CPU_FAN)

power connector and possesses a ful-proof connection design.

Most coolers are designed with color-coded power connector wires. A red power connector wire indi-

cates a positive connection and requires a +12V power voltage. The black connector wire is the

ground wire (GND).

Please remember to connect the power to the cooler to prevent system overheating and failure.

Caution!

Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.

SIGNAL

GND

+12V

CPU_FAN

SYS_FAN

Sense

Speed Control (Only for CPU_FAN)

ATX_12V (+12V Power Connector)

The ATX_12V power connector provides power to the CPU. If this connector is not Attached,

the system will not start.

SIGNAL

GND

+12V

ATX (ATX Power Connector)

The ATX power connector provides power to the motherboard. Prior to connection, please

make sure that the power supply is disconnected.

SIGNAL

3.3V

-12V

GND

+5V

PS_ON (soft on/off)

GND

-5V

+5V

GND

Power Good

5V SB (stand by +5V)

+12V

+5V

+12V

+5V

3.3V (only for 24-pin ATX)

GND

PWR_LED

Connects to the system power LED indicator whereby the power is indicated as ON or OFF.

However, the indicator will flash when the system is suspended.

SIGNAL

MPD+

MPD-

F_PANEL (Front Panel Control Connector)

The F_Panel Control Connector connects to certain connectors on the front panel of the

system casing such as IDE Hard Disk Active LED, speaker, reset, and power on/off connectors.

You can use the schematic diagram below as the basis for connection.

SIGNAL

IDE Hard Disk Active LED

Speaker Connector

Reset Switch

SPK

RES

Soft Power Connector

Message LED/Power/Sleep LED

MSG

SATA0/SATA2 (Serial ATA Connector, controlled by ICH6)

The SATA0/2 connector is able to connect a single Serial ATA device via a SATA cable.

For the connected SATA hard disk to work correctly, please check the related BIOS setting

and install proper driver for the SATA controller.

SIGNAL

GND

TXP

SIGNAL

RXN

RXP

TXN

GND

F_AUDIO (Front Audio Connector)

Connects to the audio connector located on the front panel of the system casing

(dependent on case design). When use of the front panel audio connector is required,

please remove the 5-6 pin, 9-10 pin jumper.

Please note that use of only the front panel audio connector or the rear panel audio connector

is permitted.

SIGNAL

MIC

SIGNAL

Rear Audio (R)

Reserved

GND

MIC_BIAS

POWER

Front Audio (R)

NO PIN

Front Audio (L)

Rear Audio (L)

CD_IN (Optical Drive Audio Connector)

Connects CD-ROM or DVD-ROM audio connector.

SIGNAL

CD_L

GND

CD_R

F_USB1 (Front USB Connector)

Connects to the USB connector located on the front panel of the system casing (dependent on

case design). Note: Please make sure that each USB connection matches its designated

position. If connections are made incorrectly, the result can lead to inability to use the function

or even damage.

SIGNAL

USB Dy+

GND

SIGNAL

POWER

USB Dx-

USB Dy-

USB Dx+

GND

NO PIN

SUR_CEN (Surround Center Connector)

Please contact the place of purchase for the optional SUR_CEN cable.

SIGNAL

SUR OUTL

SUR OUTR

GND

No Pin

CENTER_OUT

BASS_OUT

CLR_CMOS (Clear CMOS)

You can clear the motherboard CMOS with the jumper to return your system to its initial

status. To prevent improper usage, the jumper does not include the jumper plug. If you wish

to use the Clear CMOS function, please short circuit the 1-2 Pin.

Open : Normal

Short : Clear CMOS

BAT(Battery)

The improper removal of the battery can result in harm. When replacing a

battery, please make sure you use one that is of similar brand and model

number.

For information related to battery specifications and precautions, please refer

to the manufacturer instructions.

If you wish to delete the data stored in the CMOS, please follow the steps

below:

1. Please turn off your computer and unplug the power.

2. Remove the battery from the motherboard.

3. Wait 10 minutes and then replace the battery onto the motherboard.

4. Plug in the power supply and turn on your system.

Hardware Installation

1. Please make sure that the CPU used is supported by your motherboard.

2. Please be aware of the placement position of the CPU. If the CPU does not

insert properly, do not apply force but check the placement position.

3. Please make sure that an even layer of heat sink paste is added between the

CPU and the fan sink.

4. Please do not turn on the power prior to installing the fan sink. Doing so can

result in overheating and lead to permanent damage to the CPU.

5. Please follow the CPU specifications when setting the frequency. It is not

recommended that system speed settings exceed that of hardware

specifications. If you wish to set your system speed to exceed the recom

mended specifications, please check your hardware specifications eg: CPU,

graphics card, memory, hard drive

The following must be supported to allow the use of Hyper-Threading Technology:

- an Intel Pentium 4 CPU with HT

- a motherboard supporting HT

- HT selection feature within BIOS

- an operating system supporting HT

2.1.

Installation of a LGA775 Pentium 4 CPU and Fan Sink

Installation of a LGA775 CPU

2.1.1.

1. Push the socket lever arm down and away from the CPU

socket and raise it up completely.

2. Open the load plate and gently remove the plastic cover.

3. Hold the CPU with your thumb and index fingers (do not

touch the bottom of the CPU when holding it).

Align notchs on the two sides of the CPU with the small

sockets of the CPU socket and place the CPU straight

down.

4. Make sure the CPU is properly installed and then close

the load plate. Lower the socket lever and engage it to

lock the CPU in place.

2.1.2.

Installation of Fan Sink

1. Apply a thin coating of thermal paste to complete cover

the surface of the CPU.

2. Align the four fasteners of the fan sink with the four holes

around the CPU socket. Push down each fastener and

you should hear a "click" when the fastener is attached.

Make sure the four fasteners are attached securely.

Prior to installation of the fan sink, check the direction of

each fastener by the arrow engraved on fastener top.

Before attaching the fasteners, turn each fastener

clockwise. To uninstall the fan sink, release each fastener

by rotating the fastener along the direction of the arrows

and pull them up.

3. Connect the 4-wire power cable of the fan sink to the

CPU_FAN header on the motherboard to complete the

installation.

2.2.

Installation of Memory

1. Before installing or removing memory, please make sure that the computer power

is turned off to prevent hardware damage.

2. Please make sure that the memory used is supported by the motherboard.

3. Memory modules have a foolproof insertion design. The memory can be in

stalled only when facing the correct position. If you cannot insert the module,

please switch directions.

4. It is recommended that memory of similar capacity, specifications and brand be

used.

The motherboard supports DIMM memory modules, whereby BIOS will automatically detect

memory capacity and specifications. Memory modules are designed so that they can be

inserted only in one direction.

1. Unfasten the clips on each end of the memory slots.

Correctly align the memory module in the slot and

push downwards..

2. Once the memory module is correctly inserted, the

clips will automatically refasten. If the memory

module is positioned in the wrong direction, it will

not insert. If this occurs, please switch directions.

2.3.

Installation of the Graphics Card

1. Before installing the graphics card, please carefully read the accompanying user manual.

As well, make sure the computer power is turned off.

2. If you install a PCI Express x 16 card and wish to remove it, please gently press the latch

to release the card as the picture below shows before removal.

To install or remove an AGP graphics card,

first pull out the white GEAR knob before

insertion or removal. Releasing the GEAR

knob will hold the graphics card firmly in

place.

2.4.

What is Axper's G.E.A.R.?

The revolutionary and innovative G.E.A.R. (GIGABYTE Enhance AGP Riser) interface pro-

vides an additional interface for traditional AGP Graphics card on Intel chipset based PCI

Express solution motherboard. It supports most of the AGP Graphics card available in the

market from AGP 4X to AGP 8X graphics cards.

Note the following Information Before Use

1) Remove the sticker on the G.E.A.R. slot before inserting your AGP graphics card.

2) G.E.A.R. interface is designed to provide a temporary AGP solution before the mass

availability of PCI Express graphics card. It is suggested to use PCI Express X 16

interface graphics card to avoid the damage of your AGP graphics card.

3) G.E.A.R. interface is created through PCI interface signal and voltage switching to AGP

interface, due to this technical specification difference, it might cause AGP graphics

card life-span shortens.

4) Please view the graphics cards support list currently validated by Axper engineers.

2.4.1.

Graphics Card Support List

(The items below are all supported under the Windows XP operating system.

When using an add-on graphics card, please first delete the onboard graphics

driver before installing the driver for the add-on graphics card.)

Figure 1-1. 4X AGP Card

Graphics Chip

Nvidia

Maker

Model Name

GA-620

Gigabyte

GA-622

GA-660 Plus

GA-GF2560

GA-GF2000

GA-GF1280

To be continued...

Figure 1-2. 4X AGP Card

Graphics Chip

Nvidia

Maker

Model Name

Gigabyte

ELSA

GV-GF2010D

GA-GF3000D

GV-GF1280-32E

GV-GF1280T-32P

GV-GF3200TF

GV-GF3500TF-GH

Gladiac Ultra

ELSA

Gladiac 517

ELSA

Gladiac 517vivo

Gladiac 525 A128

WinFast A170 TH

WinFast A250 TO

WinFast A250 Ultra

GV-AR64DL-T-SI

GV-AR64S-H

Leadtek

Gigabyte

Prolink

ATi

GV-AP64D

GV-AP64DH

GV-AP128DG-H

GV-AF128D-GH

SiS315 64MB

SiS

Savage

ASUS

V3500

Figure 2. 8X AGP Card

Graphics Chip

Nvidia

Maker

Model Name

Gigabyte

ASUS

GV-N57L128D

GV-N59X128D

V9180TD

ASUS

V9480-TVD

ASUS

V9520

MSI

MX440-VTD8X MS-8888

Ti4600-TD-8X

WinFastA280LETD

WinFast A310 TD

NVIDIA 5950

GV-R9700 Pro

GV-R9700

MSI

Leadtek

Albatron

Gigabyte

Triplex

ATi

GV-R9500

GV-R9200C3

GV-R98P128D

GV-R92P128VH

Xabre Pro

SiS

Power Color

Xabre 600 Pro

To be continued...

Figure 3. PCI Express x16 Card

Graphics Chip

Nvidia

Maker

Model Name

Gigabyte

ASUS

GV-NX53128D

GV-NX57128D

GV-NX59128D

GV-NX62128D

GV-NX66256D

GV-NX66T128VP

GV-NX66T128D

GV-NX68T256DH

GV-NX55128DP

GV-NX68U256D

GV-NX62TC256D

EN6600/TD/128

GV-RX30S128D

GV-RX60P128D

GV-RX60X128V

GV-RX70128D

GV-RX70P128D

GV-RX80T256V

GV-RX80L256V

GV-RX80256D

AX800XT

ATi

Gigabyte

ASUS

AX700PRO

MSI

RX600 XT-TD128

For the most up-to-date information related to graphics card support, please link to our

website at http://www.axper.com

BIOS Setup

BIOS (Basic Input and Output System) stores all the information of the motherboard settings

that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user

to make changes in BIOS configurations that are required or to activate certain features.

The CMOS SETUP saves each item configuration in the CMOS SRAM of the motherboard.

When the power is turned off, the battery on the motherboard supplies the required power to

the CMOS SRAM.

When the power is turned on, pushing the <Del> button during the BIOS POST (Power-On

Self Test) will bring up the CMOS SETUP screen. If you wish to enter the BIOS setup, please

press "Ctrl + F1" at the BIOS setup screen.

When using BIOS setup for the first time, it is recommended that you save the present BIOS

onto a disk in case you need to reset the BIOS back to its original settings. If you wish to

update to a new BIOS, the "BIOSNow!" can be used.

The user can select "BIOSNow!" as a way to quickly and easily update or back up BIOS

without entering the operating system.

3.1.

Setup Screen Features (BIOS version:F1)

When you enter the CMOS SETUP screen, you will see the following screen and setting

selections as shown below.

}

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PnP/PCI Configurations

PC Health Status

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

Frequency/Voltage Control

ESC: Quit

F8: BIOSNow!

higf: Select Item

F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Instructions

< , ,

,Enter>

Movement in all four directions to highlight a desired option,

pressing <Enter> will select the option and take you to its

appropriate screen

Used to toggle up and down the available options for a

particular item, whereby <Page Up> can also be used to

increase value option and <Page Down> to decrease

value option

<Esc>

<F1>

<F2>

<F5>

Return to main setup screen or exit setup

Gives the list of options available for each item

Gives the list of options available for the current item

Returns settings to previous values (not applicable to main setup

screen)

<F6>

<F7>

Gives the list of options available for each item

Return to Optimized default values (not applicable to main

setup screen)

<F8>

<F9>

<F10>

Enters BIOSNow! feature

Displays system information

Saves settings and exits setup

3.2.

Standard CMOS Features

Includes the settings for items such as date, time, floppy disk drive specifications, and

hard drives connected to the IDE interface.

Standard CMOS Features

Date (mm:dd:yy)

Time (hh:mm:ss)

Fri, Jan 9 2005

22:31:24

Item Help

Menu Level}

Change the day, month,

year

}

IDE Channel 0 Master

IDE Channel 0 Slave

IDE Channel 2 Master

IDE Channel 2 Slave

[None]

<Week>

Sun. to Sat.

Drive A

Drive B

Floppy 3 Mode Support

[1.44M, 3.5"]

[None]

[Disabled]

<Month>

Jan. to Dec.

<Day>

1 to 31 (or maximum

allowed in the month)

Halt On

[All, But Keyboard]

Base Memory

Extended Memory

Total Memory

640K

127M

128M

<Year>

1999 to 2098

higf: Move

Enter: Select

+/-/PU/PD: Value

F6: Fail-Safe Defaults

F10: Save

ESC: Exit

F7: Optimized Defaults

F1: General Help

F5: Previous Values

n Date (mm:dd:yy)

Allows you to setup the date in the mm:dd:yy fashion.

n Time (hh:mm:ss)

Allows you to set up the date in the hh:mm:ss fashion. The time must be entered in the

24-hour format.

n IDE Channel 0 Master(Slave) [IDE Device Setup]

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device

detection.

IDE Channel 0 Master(Slave) You can use one of three methods:

Auto

None

Allows BIOS to automatically detect IDE devices during POST(default)

Select this if no IDE devices are used and the system will skip the

automatic detection step and allow for faster system start up.

User can manually input the correct settings

Manual

Access Mode Use this to set the access mode for the hard drive. The four

options are:CHS/LBA/Large/Auto(default:Auto)

n IDE Channel 2 Master(Slave)

[IDE Device Setup]

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device

detection.

Extended IDE Drive You can use one of two methods:

Auto

None

Allows BIOS to automatically detect IDE devices during POST(default)

Select this if no IDE devices are used and the system will skip the

automatic detection step and allow for faster system start up.

Use this to set the access mode for the hard drive. The two

options are:Large/Auto(default:Auto)

Access Mode

Hard drive information should be labeled on the outside drive casing. Enter the

appropriate option based on this information.

n Drive A/B

Allows user to configure the type of floppy drive his/she installs.

Options:

None (No floppy drive installed)

360K, 5.25" (5.25 inch PC-type high-density drive; 360K bytes

capacity.)

1.2M, 5.25" (5.25 inch AT-type high-density drive; 1.2M bytes

capacity.)

720K, 3.5" (3.5 inch double-sided drive; 720K bytes capacity.)

1.44M, 3.5" (3.5 inch double-sided drive; 1.44M bytes capacity.)

2.88M, 3.5" (3.5 inch double-sided drive; 2.88M bytes capacity.)

n Floppy 3 Mode Support

Allows user to configure a Japanese standard 3 Mode floppy drive.

Options:

Disabled (No 3 Mode drive installed)

Drive A (3 Mode Drive installed in A:)

Drive B (3 Mode Drive installed in B:)

Both (3 Mode Drive installed in A: and B:)

n Halt on

Tells the BIOS specifically which types of errors will halt the computer during the power-

on self test (POST) section of the boot.

Options:

No Errors (Never halt when an error is detected)

All Errors (Halt whenever an error is detected)

All, But Keyboard (Halt whenever an error is detected with the

exception of the keyboard)

All, But Diskette (Halt whenever an error is detected with the ex

ception of the diskette)

All, But Disk/Key (Halt whenever an error is detected with the

exception of the diskette and keyboard) (default:All, But Keyboard)

n Memory

When BIOS is displayed during POST, memory capacity is also displayed as shown

below:

Base Memory, Extended Memory, Total Memory (the user can verify the accuracy of

these values)

3.3.

Advanced BIOS Features

Allows the configuration of advanced settings such as boot sequence, password

check, etc.

Advanced BIOS Features

}

Hard Disk Boot Priority

First Boot Device

[Press Enter]

[Floppy]

Item Help

Menu Level}

Second Boot Device

Third Boot Device

Password Check

[USB-FDD]

[Hard Disk]

[Setup]

Select Hard Disk Boot

Device Priority

CPU Hyper-Threading^#

Limit CPUID Max. to 3

No-Execute Memory Protect ^(Note)

CPU Enhanced Halt (C1E) ^(Note)

CPU Thermal Monitor 2(TM2) ^(Note)

CPU EIST Function ^(Note)

On-Chip Frame Buffer Size

[Enabled]

[Disabled]

[Enabled]

[8MB]

higf: Move

Enter: Select

+/-/PU/PD: Value

F6: Fail-Safe Defaults

F10: Save

ESC: Exit

F7: Optimized Defaults

F1: General Help

F5: Previous Values

" # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology,

the system will automatically provide this option.

n Hard Disk Boot Priority

The user can select the boot order for hard disks connected to onboard IDE, SATA,

SCSI, RAID controllers or other add-on cards.

n First / Second / Third Boot Device

The user can select the order in which the system will boot.

Options:

Floppy, LS120, Hard Disk, CDROM, ZIP,USB-FDD, USB-ZIP, USB-

CDROM, USB-HDD, LAN, Disabled

n Password Check

Allows user to set a password. To remove the password entry requirement, enter

SETUP and make sure there is no entry and then press <Enter>.

Options:

System (Password entry is required during system start up and to enter

CMOS SETUP)

Setup (Password entry is required to enter CMOS SETUP)(default:Setup)

n CPU Hyper-Threading

Allows user to enable the CPU Hyper-Threading function, of which must also be sup

ported by the operating system. (default: Enabled)

n Limit CPUID Max. to 3

This option will be available when you install an Intel Prescott processor.

Enable this item when you install old operating systems (example:NT 4.0)

(default: Disabled)

(Note) If the installed CPU supports this function, the system will automatically provide this

option.

n No-Execute Memory Protect^(Note)

Allows user to enable the No-Execute Memory Protect function. (default: Enabled)

n CPU Enhanced Halt (C1E)^(Note)

Allows user to enable the CPU Enhanced Halt (C1E) function. (default: Enabled)

n CPU Thermal Monitor 2(TM2)^(Note)

Allows user to enable the CPU Thermal Monitor 2(TM2) function.(default: Enabled)

n CPU EIST Function^(Note)

Allows user to enable the CPU EIST function.(default: Enabled)

n On-Chip Frame Buffer Size

Allows user to set the size of the on-chip frame buffer.

Options:

1MB/4MB/8MB/16MB/32MB (default:8MB)

3.4.

Integrated Peripherals

This menu allows you to control the various ports of the computer such as IDE,

SATA, USB, IEEE1394, COM port, LPT port, AC97 audio, etc.

Integrated Peripherals

On-Chip Primary PCI IDE

On-Chip SATA Mode

PATA IDE Set to

SATA Port 0/2 Set to

USB Controller

USB 2.0 Controller

USB Keyboard Support

USB Mouse Support

AC97 Audio

[Enabled]

[Enhanced]

Ch.0 Master/Slave

Ch.2 Master/Slave

[Enabled]

[Disabled]

[Auto]

Item Help

Menu Level}

If a hard disk

controller card is

used, set at Disabled

[Enabled]

Enable onboard IDE

PORT

Onboard H/W LAN

OnBoard LAN Boot ROM

Onboard Serial Port 1

Onboard Parallel Port

Parallel Port Mode

ECP Mode Use DMA

[Enabled]

[Disabled]

[3F8/IRQ4]

[378/IRQ7]

[SPP]

[Disabled]

Disable onboard IDE

PORT

higf: Move

Enter: Select

+/-/PU/PD: Value

F6: Fail-Safe Defaults

F10: Save

ESC: Exit

F7: Optimized Defaults

F1: General Help

F5: Previous Values

n On-Chip Primary PCI IDE

Allows the user to enable or disable the first onboard IDE channel.

(default:Enabled)

n On-Chip SATA Mode

Options:

Disabled (Disable this function.)

Auto (BIOS will detect automatically)

Combined (Support up to 4 hard drives: Two for SATA ports and two for

PATA IDE ports)

Enhanced (Allow up to 4 hard drives to be used)

Non-Combined (SATA will be configured to PATA mode)(default:Enhanced)

(Note) If the installed CPU supports this function, the system will automatically provide this

option.

n PATA IDE Set to

Options:

Ch.0 Master/Slave, Ch.1 Master/Slave (default:Ch.0 Master/Slave )

n SATA Port 0/2 Set to

This value depends on the settings of "On-Chip SATA Mode" and "PATA IDE Set to". For

example, if you set PATA IDE to Ch. 1 Master/Slave, this option will be automatically set to

Ch. 0 Master/Slave.

n USB Controller

Allows the user to enable or disable the onboard USB controller. (default:Enabled)

n USB 2.0 Controller

Allows the user to enable or disable the onboard USB2.0 (default:Enabled)

n USB Keyboard Support

Allows user to use a USB-based keyboard (Enable if you are using a USB keyboard,

otherwise Disable) (default:Disabled)

n USB Mouse Support

Allows user to use a USB-based mouse (Enable if you are using a USB mouse,

otherwise Disable) (default:Disabled)

n AC97 Audio

Allows the user to use the onboard AC97 audio (default:Auto)

n Onboard H/W LAN

Allows the user to enable or disable the onboard LAN (default:Enabled)

n OnBoard LAN Boot ROM

Allows user to enable or disable booting from a network drive (default:Disabled)

n Onboard Serial Port 1

Allows the user to enable or disable the first onboard serial port

Options:

Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:3F8/IRQ4)

n Onboard Parallel Port

Allows the user to enable or disable the onboard parallel port.

Options:

378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled (default:378/IRQ7)

n Parallel Mode

Use this to select the operation mode for the parallel port.

Options:

SPP,EPP,ECP,EPP+ECP(default:SPP)

n ECP Mode Use DMA

Allows the user to select the ECP Mode Use DMA

Options:

1, 3, Disabled (default:3)

3.5.

Power Management Setup

This is used to control the various power saving features of the PC.

Power Management Setup

ACPI Suspend Type

Soft-Off by PWR-BTTN

PME Event Wake Up

ModemRingOn

[S1(POS)]

[Instant-Off]

[Enabled]

[Disabled]

Everyday

0 : 0 : 0

[Disabled]

Enter

Item Help

Menu Level}

[S1]

Set suspend type to

Power On Suspend under

ACPI OS

Resume by Alarm

Date (of Month) Alarm

Time (hh:mm:ss) Alarm

Power On by Mouse

Power On by Keyboard

KB Power ON Password

AC BACK Function

[S3]

Set suspend type to

Suspend to RAM under

ACPI OS

[Soft-Off]

higf: Move

Enter: Select

+/-/PU/PD: Value

F6: Fail-Safe Defaults

F10: Save

ESC: Exit

F7: Optimized Defaults

F1: General Help

F5: Previous Values

n ACPI Suspend Type

Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/

POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS)

n Soft-Off by PWR-BTTN

Controls whether the PC shuts off immediately after hitting the power button or delaying

a few seconds. (default:Instant-Off)

Options:

Instant-off (PC shuts off immediately)

Delay 4 Sec. (PC shuts off after a 4-sec. delay)

n PME Event Wake Up

Allows user to select the Power Management Event (PME) wake up function which

requires the system to have a +5VSB power supply using a rate of 1A or less.

(default:Enabled)

n ModemRingOn

To use this feature, an Ethernet card supporting the PCI2.2 or newer standard must be

used. (default:Enabled)

n Resume by Alarm

If set to Enabled, the user can set the date and time for automatic system power-on.

(default:Disabled)

Settings:

Date (of Month) Alarm :

Everyday, 1~31

Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)

n Power On by Mouse

Allows user to turn on system using the mouse. (default:Disabled)

n Power On By Keyboard

Allows user to turn on system using the keyboard. (default:Disabled)

n KB Power ON Password

Allows user to set a 1-5 character long password for powering on the keyboard. Select

Enter to complete setting.

n ACBACKFunction

Allows user to select system status when power is removed and returned.

Options:

Memory (return prior to power removal)

Full-On (return to full system power)

Soft-Off (use of Soft PWR button to power on system)(default:Soft-Off)

3.6.

PnP/PCI Configuration

This menu allows you to configure your PCI slots. You can assign IRQ's for various PCI

slots.

PnP/PCI Configurations

PCI 1 IRQ Assignment

PCI 2 IRQ Assignment

PCI 3 IRQ Assignment

[Auto]

Item Help

Menu Level}

Device(s) using this

INT:

Simple COMM. Cntrlr

- Bus 0 Dev30 Func 3

higf: Move

Enter: Select

+/-/PU/PD: Value

F6: Fail-Safe Defaults

F10: Save

ESC: Exit

F7: Optimized Defaults

F1: General Help

F5: Previous Values

n PCI 1 IRQ Assignment

Allows you to assign an IRQ for the first PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14,

15 (default:Auto)

n PCI 2 IRQ Assignment

Allows you to assign an IRQ for the second PCI slot. Options: Auto,3,4,5,7,9,10,11,12,

14,15 (default:Auto)

n PCI 3 IRQ Assignment

Allows you to assign an IRQ for the third PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14,

15 (default:Auto)

3.7.

PC Health Status

This menu displays the current CPU temperature, the fan speeds, voltages etc.

PC Health Status

Vcore

DDR25V

Item Help

Menu Level}

+3.3V

+12V

Current CPU Temperature

Current CPU FAN Speed

Current SYSTEM FAN Speed

CPU Warning Temperature

CPU FAN Fail Warning

SYSTEM FAN Fail Warning

CPU Smart FAN Control

CPU Smart FAN Mode

45°C

4440 RPM

0 RPM

[Disabled]

[Enabled]

[Auto]

higf: Move

Enter: Select

+/-/PU/PD: Value

F6: Fail-Safe Defaults

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F7: Optimized Defaults

n Current Voltage(V) Vcore / DDR25V / +3.3V / +12V

Automatically checks system voltage

n Current CPU Temperature

Automatically checks CPU temperature

n Current CPU / SYSTEM FAN Speed (RPM)

Automatically checks CPU/SYSTEM fan speed

n CPU Warning Temperature

If CPU temperature exceeds the temperature users select, alarm will occur. (default:

Disabled)

Options:

60^oC / 140^oF

70^oC / 158^oF

80^oC / 176^oF

90^oC / 194^oF

Disabled

n CPU / SYSTEM FAN Fail Warning

Allows users to enable or disable the CPU/System Fan Fail Warning function. (default:

Disabled)

n CPU Smart FAN Control

Allows users to enable or disable the CPU Smart FAN Control function. (default:

Enabled) With this item set to enabled, CPU fan changes speed depending on CPU

temperature.

n CPU Smart FAN Mode

Allows users to set the CPU Smart FAN mode when CPU Smart FAN Control is set to

Enabled. (default: Auto)

Options:

Note:

Auto (BIOS autochecks which type of CPU fan is installed and sets the

optimcal CPU Smart FAN control mode.)

Voltage (Set this item to Voltage if a 3-pin CPU fan is installed.)

PWM (Set this item to PWM if a 4-pin CPU fan is installed.)

In fact, you can set the CPU Smart Fan Control mode to Voltage for either 3-

pin or 4-pin CPU fan. However, for those 4-pin CPU fans that are not

designed following Intel's 4-wire fans PWM control specifications, setting

the CPU Smart Fan Control mode to PWM may not effectively reduce the CPU

fan speed.

3.8.

Frequency/Voltage Control

This allows user to configure CPU frequency and voltage settings.

Frequency/Voltage Control

CPU Clock Ratio

Memory Frequency For

Memory Frequency (Mhz)

[15X]

[Auto]

266

Item Help

Menu Level}

Set CPU Ratio if CPU

Ratio is unlocked

higf: Move

Enter: Select

+/-/PU/PD: Value

F6: Fail-Safe Defaults

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F7: Optimized Defaults

n CPU Clock Ratio

Allows user to set the CPU Clock Ratio.

If the CPU used locks this feature, then it will not be displayed or will not function. (based

on CPU type)

n Memory Frequency For

for FSB(Front Side Bus) frequency=533MHz,

2.50

3.00

4.00

Memory Frequency = Host clock X 2.50.

Memory Frequency = Host clock X 3.00.

Memory Frequency = Host clock X 4.00.

Auto Set Memory frequency by DRAM SPD data.

for FSB(Front Side Bus) frequency=800MHz,

1.66

2.00

2.66

Memory Frequency = Host clock X 1.66.

Memory Frequency = Host clock X 2.00.

Memory Frequency = Host clock X 2.66.

Auto Set Memory frequency by DRAM SPD data.

n Memory Frequency (Mhz)

The memory frequency is based on the " Memory Frequency For" setting.

3.9.

Load Fail-Safe Defaults

Use this option to reset your BIOS settings to the system defaults. You should only use

this if you are encountering serious problems.

Please select <Y> and <Enter> to load Fail-Safe defaults. Once this is loaded, your

system may be slowed since this uses a minimal performance setting to allow stable

system running.

3.10. Load Optimized Defaults

Like the Fail-Safe mode above, this option loads the BIOS default settings, but runs the

system at optimal performance.

Please select <Y> and <Enter> to load optimized defaults.

3.11. Set User Password

Use this to set the password that is needed to either enter into the BIOS or to boot the

system. Entering in a blank field will disable the password.

Please input an 8 character long password and then select Enter. You will be required

to re-enter the password for confirmation. If you wish to remove the need for password

entry, leave the entry blank and then select Enter. BIOS will then display "PASSWORD

DISABLED". Once you have completed the password setting, you will need to go to

"Advanced BIOS Features" and select "Password Check" for setup of password check.

3.12. Save & Exit Setup

To save any changes you made to the BIOS you must choose this option. The

system will automatically exit setup and perform a system restart. Pushing <F10>

will have the same effect.

Push <Y> and <Enter> to save and exit setup. If you do not wish to save, select <N> or

<Esc> to return to the main menu.

3.13. Exit Without Saving

Use this option instead of the one above if you wish to exit the BIOS without saving the

changes you have made. Pushing <ESC> will have the same effect.

Push <Y> and <Enter> to exit setup. You can return to the main menu by pushing <N>or

<Esc>.

Driver Installation

Driver installation for the Windows 2000/XP operating systems is simple. Once you insert

the provided driver disks into your optical drive, the AUTORUN screen will appear. If this

screen does not appear, you can use "D:\setup.exe" (with "D" being the specified drive) to

bring up the screen shown below. Just follow the screen instructions to easily complete

driver installation.

Open User Manual

Display system information

Open Readme File

Browse CD

axper Install -Displays required driver installation, select "Go" for

automatic installation

Customize Installation - Allows specific choice of drivers for installation

axper Utilities - Displays axper's unique utilities

Software - Displays the required software

Intel GA 8VM800PMD 775 User Manual
JVC GGT0040 001B H User Manual
Kenmore 790 4292 User Manual
KitchenAid YKECC500B User Manual
Lenovo 7057 User Manual
LG Electronics MU 50PZ90 User Manual
Marantz PD6001 User Manual
Maytag Cooktop CG11000AD User Manual
Oricom ECO700 User Manual
Philips 29PT4323 User Manual