Iiyama Computer Monitor PLT1500 User Manual

USER MANUAL  
ENGLISH  
DEUTSCH  
FRANCAIS  
NEDERLANDS  
Thank you very much for choosing the iiyama  
LCD monitor.  
We recommend that you take a few minutes to  
read carefully through this brief but  
comprehensive manual before installing and  
switching on the monitor. Please keep this  
manual in a safe place for your future reference.  
TABLE OF CONTENTS  
FOR YOUR SAFETY.............................................................................. 1  
SAFETY PRECAUTIONS ................................................................. 1  
SPECIAL NOTES ON LCD MONITORS ............................................. 3  
CUSTOMERSERVICE ...................................................................... 3  
CLEANING ....................................................................................... 3  
BEFOREYOU OPERATETHE MONITOR ................................................ 4  
FEATURES ....................................................................................... 4  
SPECIALNOTES ONTOUCH PANEL ............................................... 4  
CHECKINGTHE CONTENTS OFTHE PACKAGE ............................. 5  
WALL MOUNTING ........................................................................... 5  
CONTROLS AND CONNECTORS : ................................................. 6  
CONNECTING YOUR MONITOR : .................................................... 7  
COMPUTERSETTING ....................................................................... 8  
ADJUSTINGTHE VIEWINGANGLE ................................................. 8  
OPERATINGTHEMONITOR ................................................................... 9  
ADJUSTMENTMENUCONTENTS .................................................... 10  
SCREENADJUSTMENTS ................................................................. 13  
POWER MANAGEMENTFEATURE .................................................. 15  
TROUBLE SHOOTING ............................................................................ 16  
APPENDIX .............................................................................................. 17  
SPECIFICATIONS : ProLiteT1530SR ............................................... 17  
SPECIFICATIONS : ProLiteT1730SR ............................................... 18  
SPECIFICATIONS : ProLiteT1930SR ............................................... 19  
DIMENSIONS .................................................................................... 20  
COMPLIANTTIMING ......................................................................... 21  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE  
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR  
FEDERAL LAWS.  
Hg  
For disposal or recycling information, please contact your local authorities or the  
Electronic Industries Alliance (www.eiae.org).  
This information is only for U.S.A..  
We recommend recycling of used product. Please contact your dealer or  
iiyama service center. Recycle information is obtained via the Internet, using  
You can access the Web page of different countries from there.  
FOR YOUR SAFETY  
SAFETY PRECAUTIONS  
WARNING  
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE  
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor  
and contact your dealer or iiyama service center immediately. Further use may be dangerous and  
can cause fire or electric shock.  
NEVER REMOVE THE CABINET  
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of  
fire or electric shock.  
DO NOT PUT ANY OBJECT INTO THE MONITOR  
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug  
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with  
any object inside may cause fire, electric shock or damage.  
DO NOT DROP AND DO NOT GIVE A SHOCK  
The monitor may cause an injury if it falls or is dropped.  
Be careful with chips of glass, may cause injuring fingers or skin, when the glass is broken.  
Do not ingest the liquid crystal and do not touch the liquid crystal with skin or cloths if LCD panel is  
broken and liquid crystal leaks.  
If liquid crystal touch eyes, mouth, skin or cloths, immediately rinse with water for over 15 minutes.  
If ingested immediately rinse with water, and then spit out after drink water. After that, consult a  
doctor.  
DO NOT USE THE MONITOR NEAR WATER  
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric  
shock.  
OPERATE UNDER THE SPECIFIED POWER SUPPLY  
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will  
cause malfunction and may cause fire or electric shock.  
PROTECT THE CABLES  
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy  
objects on the cables. If damaged, the cables may cause fire or electric shock.  
ADVERSE WEATHER CONDITIONS  
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in  
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it  
may cause electric shock.  
1
FOR YOUR SAFETY  
CAUTION  
INSTALLATION LOCATION  
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky  
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun  
shines directly on the monitor.  
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION  
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not  
place any heavy objects on the monitor, and that all cables are routed such that children may not pull  
the cables and possibly cause injury.  
MAINTAIN GOOD VENTILATION  
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause  
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.  
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet  
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.  
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may  
also cause damage.  
We suggest installing a cooling fan when placing the monitor into a rack.  
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR  
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal  
cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.  
UNPLUG THE MONITOR  
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid  
accidents.  
HOLD THE PLUG WHEN DISCONNECTING  
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself  
as this may cause fire or electric shock.  
DO NOT TOUCH THE PLUG WITH WET HANDS  
Pulling or inserting the plug with wet hands may cause electric shock.  
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER  
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage  
your computer.  
OTHERS  
ERGONOMIC RECOMMENDATIONS  
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For  
optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)  
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour  
is recommended as looking at the screen continuously can cause eye strain.  
FOR YOUR SAFETY  
2
SPECIAL NOTES ON LCD MONITORS  
The following symptoms are normal with LCD monitors and do not indicate a problem.  
When you first turn on the LCD monitor, the picture may not fit in the display area  
because of the type of computer that is used. In this case, adjust the picture  
position to the correct position.  
NOTE  
Due to the nature of the backlight, the screen may flicker during initial use. Turn off  
the Power Switch and then turn it on again to make sure the flicker disappears.  
You may find slightly uneven brightness on the screen depending on the desktop  
pattern you use.  
Due to the nature of the LCD screen, an afterimage of the previous screen may  
remain after switching the image, when the same image is displayed for hours. In  
this case, the screen is recovered slowly by changing the image or turning off the  
Power Switch for hours. There is the possibility that the previous screen has been  
fixed. Pay attention sufficient when you use LCD Monitor.  
Contact your dealer or iiyama service center for the backlight replacement when the  
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.  
Condensation may appear between Touch screen and LCD screen. It is the natural  
phenomenon and it is not a malfunction.  
Condensation disappears with slowly warming the whole unit.  
Non condensing when the unit is in-use, it will cause defective symptoms.  
CUSTOMER SERVICE  
The fluorescent light used in the LCD monitor may have to be periodically replaced. For the  
warranty coverage on this component, please check with local iiyama service center.  
NOTE  
If you have to return your unit for service and the original packaging has been discarded,  
please contact your dealer or iiyama service center for advice or replacement packaging.  
CLEANING  
If you drop any materials or liquids such as water into the monitor when cleaning,  
unplug the power cable immediately and contact your dealer or iiyama service center.  
WARNING  
CAUTION  
NOTE  
For safety reasons, turn off the power switch and unplug the monitor before you  
clean it.  
To protect the LCD panel, do not scratch or rub the screen with a hard object.  
Never use any of the following strong solvents. These will damage the cabinet and  
the LCD screen.  
Thinner  
Benzine  
Spray-type cleaner  
Wax  
Abrasive cleaner  
Acid or Alkaline solvent  
Touching the cabinet and the LCD screen with any product made from rubber or  
plastic for a long time may cause degeneration or loss of paint on the cabinet and the  
LCD screen.  
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then  
wipe the cabinet with a soft dry cloth.  
CABINET  
Periodic cleaning with a soft dry cloth is recommended.  
LCD  
Don’t use tissue paper etc. because these will damage the LCD screen.  
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.  
Then wipe the touch screen with a soft dry cloth. Don’t pour the detergent solvent on  
the touch screen.  
SCREEN  
3
FOR YOUR SAFETY  
BEFORE YOU OPERATE THE MONITOR  
FEATURES  
ProLite T1530SR : 38cm (15.0") TFT Color LCD Monitor Resistive Film  
ProLite T1730SR : 43cm (17.0") TFT Color LCD Monitor Resistive Film  
ProLite T1930SR : 48cm (19.0") TFT Color LCD Monitor Resistive Film  
ProLite T1530SR: Supports Resolutions up to 1024 × 768  
ProLite T1730SR / ProLite T1930SR : Supports Resolutions up to 1280 × 1024  
Digital Character Smoothing  
Automatic Set-up  
Plug & Play VESA DDC2B Compliant  
Windows® 95/98/2000/Me/XP/Vista Compliant  
Power Management (VESA DPMS Compliant)  
ProLite T1530SR : VESA Standard (75mm×75mm) for Arm or Wall Mounting  
ProLite T1730SR / ProLite T1930SR :  
VESA Standard (100mm×100mm) for Arm or Wall Mounting  
Stereo Speakers  
SPECIAL NOTES ON TOUCH PANEL  
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.  
This could invalidate any remaining warranty.  
We recommend to use a plastic stylus (tip R0.8 or over) or finger.  
BEFORE YOU OPERATE THE MONITOR  
4
CHECKING THE CONTENTS OF THE PACKAGE  
The following accessories are included in your package. Check to see if they are enclosed with the monitor.  
If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.  
ProLite T  
1730SR  
1930SR  
1530SR  
Accessories  
AC Adapter*1  
{
{
{
{
{
{
{
Power Cable*1  
D-Sub Signal Cable  
DVI-D Signal Cable  
RS-232C Cable  
USB Cable  
{
{
{
{
{
{
Audio Cable  
Touch Panel Driver Disk  
(CD-ROM)*2  
{
{
{
{
User Manual  
*1 1. TO USERS IN 120V AREA  
CAUTION  
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using  
a power supply higher than this rating, then a power cable with a rating of 10A/  
250V must be used. However, all guarantees and warranties are void for any  
problems or damage caused by a power cable or AC adapter not supplied by iiyama.  
2. AC Adapter Type Name : LSE9901B1250  
(LI SHIN INTERNATIONAL ENTERPRISE CORP.)  
*2 This CD-ROM contains the touch screen driver software.  
Install the Touch Panel Driver Disk after connecting the computer to the monitor with  
RS-232C Cable or USB Cable. For the details, see Readme file in the Touch Panel  
Driver Disk.  
WALL MOUNTING  
Screw  
Mounting Stage  
When you use with the wall mounting, in  
WARNING  
consideration of thickness of the mounting stage,  
tighten the M4 Screw with washer which “L” length  
is 6mm to fasten the monitor. Using the screw longer  
than this may cause electric shock or damage  
because it may contact with the electrical parts inside  
the monitor.  
L
Chassis  
5
BEFORE YOU OPERATE THE MONITOR  
CONTROLS AND CONNECTORS  
<Front>  
<Back>  
/ Menu Button ( / MENU)  
A
B
/ Brightness Button (  
+ / Volume Button (+ /  
/
)
)
C
D
– / Input Button (– / INPUT )  
With the OSD menu off, pressing the Input Button will switch the input signal from D-  
SUB to DVI.  
NOTE  
Power Indicator  
E
NOTE  
Green: Normal operation  
Orange: Power Management  
The monitor enters into power management mode which reduces the power  
consumption to less than 2W when receiving no horizontal and/or vertical  
sync signal.  
Speakers  
F
Power Switch (  
)
G
NOTE  
Holding the Power Switch will turn off the power.  
Connector for AC Adapter (DC-in)*1  
D-Sub mini 15pin Connector (D-SUB)  
DVI-D 24pin Connector (DVI)  
H
I
J
Audio Connector (AUDIO in)  
K
L
USB Cable Connector (  
)
M RS-232C Cable Connector (  
)
N Keyhole for Security Lock*3  
NOTE  
You can fasten a security lock and cable to prevent the monitor from being removed  
without your permission.  
O Keyhole for Security Lock*4  
NOTE  
You can fasten a security lock and cable to prevent the monitor from being removed  
without your permission.  
P
AC Connector (AC in)*2  
*1 Available for ProLite T1530SR only.  
*2 Available for ProLite T1730SR and ProLite T1930SR only.  
*3 Available for ProLite T1530SR and ProLite T1730SR only.  
*4 Available for ProLite T1930SR only.  
BEFORE YOU OPERATE THE MONITOR  
6
CONNECTING YOUR MONITOR  
Ensure that both the computer and the monitor are switched off.  
A
B
C
Connect the computer to the monitor with the Signal Cable.  
Connect the computer to the monitor with the RS-232C Cable or the USB Cable.  
Connect the monitor to the audio equipment with the Audio Cable when using the audio features.  
Connect the Power Cable to the monitor first and then to the power supply.  
D
E
NOTE The signal cables used for connecting the computer and monitor vary by the type of  
computer used. An incorrect connection may cause serious damage to both the monitor  
and the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub  
connector. If a special cable is required please contact your local iiyama dealer or regional  
iiyama office.  
For connection to Macintosh computers, contact your local iiyama dealer or regional  
iiyama office for a suitable adaptor.  
Make sure you tighten the finger screws at each end of the Signal Cable and the RS-  
232C Cable.  
Don't connect the RS-232C cable and the USB cable to the computer at the same time. And  
cannot use those at the same time.  
[Example of Connection]  
< Back >  
*
2
Power Cable (Accessory)  
AC Adapter  
(Accessory)  
*
1
*
Power Cable (Accessory) 1  
RS-232C Cable (Accessory)  
USB Cable (Accessory)  
Audio Cable (Accessory)  
DVI-D Signal Cable (Accessory)  
D-Sub Signal Cable (Accessory)  
Computer  
*1 Available for ProLite T1530SR only.  
*2 Available for ProLite T1730SR and ProLite T1930SR only.  
7
BEFORE YOU OPERATE THE MONITOR  
COMPUTER SETTING  
Signal Timing  
Change to the desired signal timings listed on page 21 in COMPLIANT TIMING.  
Windows 95/98/2000/Me/XP/Vista Plug & Play  
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on  
Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with  
the Signal Cable supplied. Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors  
may be necessary for your computer and obtained via the Internet, using the address:  
NOTE  
For additional information on how to download the driver for your monitor, please  
access one of the internet sites noted above.  
Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.  
For further information, please contact your computer dealer first for advice.  
Procedure for turning ON the Power Switch  
Turn ON the monitor first, and then the computer.  
Touch screen driver software  
Touch screen driver software and system may not start when you start your computer while  
touching the screen.  
Touch screen driver software may not run due to the power saving function depending on the  
BIOS of your computer. In this case, set the power saving function to off.  
ADJUSTING THE VIEWING ANGLE  
For optimal viewing it is recommended to look at the  
full face of the monitor, then adjust the monitor’s angle  
to your own preference.  
Hold the panel so that the monitor does not topple  
when you change the monitor’s angle.  
You are able to adjust the monitor’s angle up to 90  
degrees upward, 5 degrees downward.  
90˚  
NOTE Do not touch the LCD screen when you  
change the angle. It may cause damage  
or break the LCD screen.  
Careful attention is required not to catch  
5˚  
your fingers or hands when you change  
the angle.  
BEFORE YOU OPERATE THE MONITOR  
8
OPERATING THE MONITOR  
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT  
TIMING shown on page 21. You are also able to adjust the picture by following the button operation  
shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS.  
Press the Menu Button to start the On Screen Display feature. There are  
(
additional menu pages which can be switched by using the  
/
Buttons.  
1280x1024  
ANALOG  
CONTRAST  
BRIGHTNESS  
VOLUME  
AUTO TUNE  
Adjustment icon  
H-POSITION  
V-POSITION  
LANGUAGE  
EXIT  
EXIT  
SELECT  
Page  
Menu page  
Use the +/– Buttons to make the appropriate adjustment or setting.  
B
For example, to correct for vertical position, press the Menu Button. Then, select  
(V-  
POSITION) by using the  
/
Buttons.  
Use the +/– Buttons to change the vertical position settings. The vertical position of the overall  
display should be changing accordingly while you are doing this.  
1280x1024  
ANALOG  
CONTRAST  
BRIGHTNESS  
VOLUME  
AUTO TUNE  
H-POSITION  
V-POSITION  
LANGUAGE  
EXIT  
The bar shows  
the progress of the  
adjustment being made.  
EXIT  
SELECT  
Page  
NOTE  
Any changes are automatically saved in the memory when the On Screen Display disappears.  
Turning off the power should be avoided while using the Menu.  
Adjustments for Clock, Phase and Position are saved for each signal timing. Except for these  
adjustments, all other adjustments have only one setting which applies to all signal timings.  
Direct  
z Key Lock Mode:  
With the power is off, press the  
Button while pressing the Power Switch will switch the Key  
Lock Mode On to Off. Adjustment items are locked out when the Key Lock Mode is active.  
9
OPERATING THE MONITOR  
ADJUSTMENT MENU CONTENTS  
1280x1024  
H : 60KHz  
V : 75Hz  
ANALOG  
Page : 1  
CONTRAST  
BRIGHTNESS  
VOLUME  
ANALOG Input  
AUTO TUNE  
H-POSITION  
V-POSITION  
LANGUAGE  
EXIT  
50  
EXIT  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀᲥ  
SELECT  
Ţ
Ţ
Page ꢁꢂꢃ  
Adjustment Item  
Problem / Option  
Button to Press  
Too dull  
CONTRAST  
Too intense  
Too dark  
Too bright  
BRIGHTNESS *1  
Direct  
Direct  
Too soft  
Too loud  
VOLUME  
Adjust Clock, Phase, V-Position and H-Poshition  
automatically.  
AUTO TUNE *2  
NOTE  
The screen becomes dark for approximately five seconds during the adjustment.  
Precision of adjustment is different by indicated pattern on the screen.  
Too far to the left  
H-POSITION  
Too far to the right  
Too low  
Too high  
V-POSITION  
LANGUAGE  
English  
English  
Italiano  
Italian  
Traditional Chinese  
Simplified Chinese  
Deutsch  
Français  
Español  
German  
French  
Spanish  
Japanese  
RETURNTOMENU Return to Menu.  
EXIT  
Exit OSD adjustments.  
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.  
*2 See page 13 for SCREENADJUSTMENTS.  
You can skip the menu pages and display an adjustment scale directly by  
using the following button operations.  
Direct  
z BRIGHTNESS: Press the  
Button when the Menu is not displayed.  
z VOLUME:  
Press the + Button when the Menu is not displayed.  
z MUTE:  
Press the + Button when the Menu is not displayed, and then press the + and –  
Buttons at the same time. To cancel MUTE, press the + Button.  
OPERATING THE MONITOR 10  
1280x1024  
ANALOG  
Page : 2  
ANALOG Input  
CLOCK  
PHASE  
RED  
GREEN  
BLUE  
COLOR TEMP.  
RESET  
EXIT  
EXIT  
SELECT  
Page  
Problem / Option  
Button to Press  
Adjustment Item  
To correct flickering text or lines  
CLOCK  
PHASE  
RED  
To correct flickering text or lines  
Too weak  
Too strong  
Too weak  
Too strong  
GREEN  
BLUE  
Too weak  
Too strong  
Warm  
Cool  
Reddish white  
Bluish white  
Normal white  
COLOR TEMP.  
Normal  
RESET  
EXIT  
Factory-preset data is restored.  
Exit OSD adjustments.  
11 OPERATING THE MONITOR  
1280x1024  
DIGITAL  
Page : 1  
DIGITAL Input  
CONTRAST  
BRIGHTNESS  
VOLUME  
LANGUAGE  
COLOR TEMP.  
EXIT  
EXIT  
SELECT  
Page  
Adjustment Item  
Problem / Option  
Button to Press  
Too dull  
CONTRAST  
Too intense  
Too dark  
BRIGHTNESS *  
Direct  
Direct  
Too bright  
Too soft  
Too loud  
VOLUME  
English  
English  
German  
French  
Spanish  
Italiano  
Italian  
Traditional Chinese  
Simplified Chinese  
LANGUAGE  
Deutsch  
Français  
Español  
Japanese  
RETURNTOMENU Return to Menu.  
Warm  
Cool  
Reddish white  
Bluish white  
COLOR TEMP.  
EXIT  
Normal  
Normal white  
Exit OSD adjustments.  
* Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.  
You can skip the menu pages and display an adjustment scale directly by  
using the following button operations.  
Direct  
z BRIGHTNESS: Press the  
Button when the Menu is not displayed.  
z VOLUME:  
Press the + Button when the Menu is not displayed.  
z MUTE:  
Press the + Button when the Menu is not displayed, and then press the + and –  
Buttons at the same time. To cancel MUTE, press the + Button.  
OPERATING THE MONITOR 12  
SCREEN ADJUSTMENTS  
The screen adjustments described in this manual are designed to set image position and minimize  
flicker or blur for the particular computer in use.  
ProLite T1530SR is designed to provide the best performance at resolution of 1024 × 768, but can not  
provide the best at resolutions of less than 1024 × 768, because the picture is automatically stretched  
to fit the full screen or displayed at optimum resolution. It is recommended to operate at resolution of  
1024 × 768, in normal use.  
ProLite T1730SR and ProLite T1930SR are designed to provide the best performance at resolution  
of 1280 × 1024, but can not provide the best at resolutions of less than 1280 × 1024 because the  
picture is automatically stretched to fit the full screen or displayed at optimum resolution. It is  
recommended to operate at resolution of 1280 × 1024 in normal use.  
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to  
the screen enlargement process.  
It is preferable to adjust the image position and frequency with the monitor controls, rather than the  
computer software or utilities.  
Perform adjustments after a warm-up period of at least thirty minutes.  
Additional adjustments may be required after the Auto Set up depending on the resolution or signal timing.  
The Auto Set up may not work correctly when displaying the picture other than the screen  
adjustment pattern. In this case, manual adjustments are required.  
There are two ways to adjust the screen. One way is automatic adjustment for Clock, Phase and  
Position. The other way is performing each adjustment manually.  
Perform the Auto Set up first when the monitor is connected to a new computer, or resolution is  
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after  
performing the Auto Set up, manual adjustments are required. Both adjustments should be made by  
using the screen adjustment patterns in the Adjustment Program obtained via the iiyama web site  
(http://www.iiyama.com).  
This manual explains adjustment under Windows 95/98/2000/Me/XP/Vista.  
Start “Adjustment Program”.  
A
B
Select the resolution for your monitor and the adjustment pattern appears.  
[Adjustment pattern]  
Color bar  
Zebra pattern  
Picture frame  
16-level gray scale  
13 OPERATING THE MONITOR  
Press the Auto Button. (Direct adjustment)  
Or perform the Auto Set up.  
C
D
E
Adjust the image manually by following procedure below when the screen has a flicker  
or blur, or the picture does not fit in the display area after performing the Auto Set up.  
Stretch the right side of the picture frame to the right edge of the display area by  
adjusting the Clock.  
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.  
F
Select “Position” in the Adjustment Program and adjust the V-Position and H-Position  
so that the frame of cross-hatch pattern fits into the display area.  
G
NOTE When the left side of the picture frame moves away from the left edge of the display  
area during the Clock adjustment, adjust Clock and H-Position alternately.  
Another way to make the Clock adjustment is to correct the vertical wavy lines in the  
zebra pattern.  
The picture may flicker during the V-Position, H-Position and Clock adjustment.  
In case the picture frame is bigger or smaller than the data display area after the Clock  
adjustment, repeat the adjustments from step  
.
C
In the case that a strong flicker or blurs remain on a part of the screen, repeat the  
adjustments from step to readjust the Clock. If the flicker or blurs still remain then  
E
set the refresh rate to 60Hz and repeat the adjustments from step  
.
C
Adjust the H-Position after the Phase adjustment if the horizontal position moves  
during the adjustment.  
OPERATING THE MONITOR 14  
Select “Brightness” in the Adjustment Program and adjust the Back Light and  
Contrast so that all 16 levels of gray in the grayscale pattern are visible.  
Click on “FINISH” to close the Adjustment Program.  
H
POWER MANAGEMENT FEATURE  
The power management feature of this product complies with every power saving requirement of  
VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the  
monitor when your computer is not in use.  
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There  
is a power management step the monitor takes as described below. The power management function,  
including any timer settings is configured by the operating system. Check your operating system  
manual for information on how this can be configured.  
Power Management Mode  
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the  
monitor enters into Power Management Mode which reduces the power consumption to less than  
2W. The screen becomes dark, and the power indicator turns to orange. From Power Management  
Mode, the image reappears in several seconds when either the keyboard or the mouse are  
touched again.  
Power Indicator  
NORMAL MODE  
Green  
POWER MANAGEMENT MODE  
Orange  
POWER  
0
2W  
100%  
CONSUMPTION  
Even when using the power management mode, the monitor consumes electricity. Turn  
off the Power Switch whenever the monitor is not in use, during the night and weekends,  
to avoid unnecessary power consumption.  
NOTE  
It is possible that the video signal from the computer may be on while the H or V sync  
signal is missing. In this instance, the POWER MANAGEMENT feature may not work  
properly.  
The monitor may not be restored from the power management depending on your  
computer system even if the screen is touched again. In this case, set the power  
management feature to off.  
15 OPERATING THE MONITOR  
TROUBLE SHOOTING  
If the monitor fails to operate correctly, please follow the steps below for a possible solution.  
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you  
have. If the monitor does not get a picture, skip to 2.  
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE  
MONITOR or if the problem persists.  
3.  
If you are experiencing a problem which is not described below or you cannot correct the  
problem, discontinue using the monitor and contact your dealer or iiyama service center for  
further assistance.  
Problem  
Check  
The picture does  
not appear.  
A
(Power indicator The Power Cable is firmly seated in the socket.  
does not light up.) The Power Switch is turned ON.  
The AC socket is live. Please check with another piece of equipment.  
(Power indicator  
is green.)  
If the blank screen saver is in active mode, touch the keyboard or the  
mouse.  
Increase the Contrast and/or Back Light level.  
The computer is ON.  
The Signal Cable is properly connected.  
The signal timing of the computer is within the specification of the monitor.  
(Power indicator If the monitor is in power management mode, touch the keyboard or the  
is orange.)  
mouse.  
The computer is ON.  
The Signal Cable is properly connected.  
The signal timing of the computer is within the specification of the monitor.  
The screen is not The Signal Cable is properly connected.  
B
synchronized.  
The signal timing of the computer is within the specification of the monitor.  
The video output level of the computer is within the specification of the  
monitor.  
The screen  
position is not in  
the center.  
The signal timing of the computer is within the specification of the monitor.  
C
D
The screen is  
too bright or too  
dark.  
The video output level of the computer is within the specification of the  
monitor.  
The power voltage is within the specification of the monitor.  
The screen is  
shaking.  
E
F
The signal timing of the computer is within the specification of the monitor.  
The touch  
The RS-232C Cable or the USB Cable is firmly seated in the socket.  
screen shows  
no response.  
Touch screen driver software is installed.  
The touch  
The calibration function set up correctly.  
G
position does not  
deviate.  
TROUBLE SHOOTING 16  
APPENDIX  
SPECIFICATIONS : ProLite T1530SR  
Model Name  
ProLite T1530SR-1  
Resistive Film  
ProLite T1530SR-2  
Technology  
Touch  
Surface processing  
Light transmission  
Anti-glare treatment  
80%  
Screen  
Communication  
system  
USB serial transfer or RS-232C serial transfer  
LCD  
Driving system  
Size  
a-Si TFT Active Matrix  
Diagonal: 38cm / 15.0"  
0.297mm H × 0.297mm V  
Panel  
Pixel pitch  
Brightness  
280cd/m2 (With touch panel)  
200cd/m2 (With touch panel)  
Contrast ratio  
Viewable angle  
500 : 1 (With touch panel)  
Horizontal: 120 degrees, Up: 40 degrees, Down: 60 degrees  
Response time  
16ms (Black, white, black Typical)  
Approx. 16.2 million  
8ms (Black, white, black Typical)  
Display Colors  
Sync Frequency  
Dot Clock  
Horizontal: 31.0-60.0kHz, Vertical: 60-75Hz  
80MHz maximum  
Maximum Resolution  
Input Connector  
1024 × 768  
D-Sub mini 15pin  
DVI-D 24pin  
Plug & Play  
VESA DDC2BTM  
Separate sync: TTL, Positive or Negative  
Input Sync Signal  
Input Video Signal  
Analog: 0.7Vp-p (Standard), 75Ω, Positive  
Digital: DVI(Digital Visual Interface standard Rev.1.0)compliance  
0.7Vrms maximum  
Input Audio Signal  
Input Audio Connector  
Speakers  
ø 3.5mm mini jack (Stereo)  
1W × 2 (Stereo speakers)  
Maximum Screen Size  
Power Source  
Power Consumption  
Dimensions  
304.1mm W × 228.1mm H / 12.0" W × 9.0" H  
DC12V, 4A  
23W maximum, Power management (VESA DPMS) : 2W (Max)  
351.0 × 314.5 × 140.0mm / 13.8 × 12.4× 5.5" (W×H×D)  
4.3kg / 9.5lbs  
Net Weight  
Tilt Angle  
Up: 90 degrees, Down: 5 degrees  
Operative temperature:  
Storage temperature:  
Operative humidity:  
Storage humidity :  
5 to 35°C / 41 to 95°F  
Environmental  
Considerations  
-20 to 60°C / -4 to 140°F  
20 to 80% (No condensation)  
10 to 90% (No condensation)  
Approvals  
CE, TÜV-SUD  
CE, TÜV-SUD, FCC-B, UL / cUL,  
VCCI-B  
17 APPENDIX  
SPECIFICATIONS : ProLite T1730SR  
Model Name  
ProLite T1730SR-1  
Resistive Film  
ProLite T1730SR-2  
Technology  
Touch  
Surface processing  
Light transmission  
Anti-glare treatment  
80%  
Screen  
Communication  
system  
USB serial transfer or RS-232C serial transfer  
LCD  
Driving system  
Size  
a-Si TFT Active Matrix  
Diagonal: 43cm / 17.0"  
0.264mm H × 0.264mm V  
240cd/m2 (With touch panel)  
800 : 1 (With touch panel)  
Horizontal: 160 degrees, Vertical: 160 degrees  
5ms (Black, white, black Typical)  
Approx. 16.2 million  
Panel  
Pixel pitch  
Brightness  
Contrast ratio  
Viewable angle  
Response time  
Display Colors  
Sync Frequency  
Dot Clock  
Horizontal: 31.0-80.0kHz, Vertical: 60-75Hz  
135MHz maximum  
Maximum Resolution  
Input Connector  
1280 × 1024  
D-Sub mini 15pin  
DVI-D 24pin  
Plug & Play  
VESA DDC2BTM  
Separate sync: TTL, Positive or Negative  
Input Sync Signal  
Input Video Signal  
Analog: 0.7Vp-p (Standard), 75Ω, Positive  
Digital: DVI(Digital Visual Interface standard Rev.1.0)compliance  
0.7Vrms maximum  
Input Audio Signal  
Input Audio Connector  
Speakers  
ø 3.5mm mini jack (Stereo)  
1W × 2 (Stereo speakers)  
Maximum Screen Size  
Power Source  
Power Consumption  
Dimensions  
337.9mm W × 270.3mm H / 13.3" W × 10.6" H  
100-240VAC, 50-60Hz, 1.5A  
33W maximum, Power management (VESA DPMS) : 2W (Max)  
392.0 × 381.5 × 180.0mm / 15.4 × 15.0 × 7.1" (W×H×D)  
6.6kg / 14.6lbs  
Net Weight  
Tilt Angle  
Up: 90 degrees, Down: 5 degrees  
Operative temperature:  
Storage temperature:  
Operative humidity:  
Storage humidity :  
5 to 35°C / 41 to 95°F  
Environmental  
Considerations  
-20 to 60°C / -4 to 140°F  
20 to 80% (No condensation)  
10 to 90% (No condensation)  
Approvals  
CE, TÜV-SUD, FCC-B, UL / cUL, CE, TÜV-SUD, VCCI-B  
VCCI-B  
APPENDIX 18  
SPECIFICATIONS : ProLite T1930SR  
Technology  
Surface processing  
Light transmission  
Resistive Film  
Anti-glare treatment  
80%  
Touch  
Screen  
Communication  
system  
USB serial transfer or RS-232C serial transfer  
LCD  
Driving system  
Size  
a-Si TFT Active Matrix  
Diagonal: 48cm / 19.0"  
0.294mm H × 0.294mm V  
240cd/m2 (With touch panel)  
800 : 1 (With touch panel)  
Horizontal: 160 degrees, Vertical: 160 degrees  
5ms (Black, white, black Typical)  
Approx. 16.7 million  
Panel  
Pixel pitch  
Brightness  
Contrast ratio  
Viewable angle  
Response time  
Display Colors  
Sync Frequency  
Dot Clock  
Horizontal: 31.0-80.0kHz, Vertical: 60-75Hz  
135MHz maximum  
Maximum Resolution  
Input Connector  
1280 × 1024  
D-Sub mini 15pin  
DVI-D 24pin  
Plug & Play  
VESA DDC2BTM  
Separate sync: TTL, Positive or Negative  
Input Sync Signal  
Input Video Signal  
Analog: 0.7Vp-p (Standard), 75Ω, Positive  
Digital: DVI(Digital Visual Interface standard Rev.1.0)compliance  
0.7Vrms maximum  
Input Audio Signal  
Input Audio Connector  
Speakers  
ø 3.5mm mini jack (Stereo)  
1W × 2 (Stereo speakers)  
Maximum Screen Size  
Power Source  
Power Consumption  
Dimensions  
376.3mm W × 301.1mm H / 14.8" W × 11.9" H  
100-240VAC, 50-60Hz, 1.5A  
42W maximum, Power management (VESA DPMS) : 2W (Max)  
438.0 × 417.5 × 180.0mm / 17.2 × 16.4 × 7.1" (W×H×D)  
7.6kg / 16.8lbs  
Net Weight  
Tilt Angle  
Up: 90 degrees, Down: 5 degrees  
Operative temperature:  
Storage temperature:  
Operative humidity:  
Storage humidity :  
5 to 35°C / 41 to 95°F  
Environmental  
Considerations  
-20 to 60°C / -4 to 140°F  
20 to 80% (No condensation)  
10 to 90% (No condensation)  
Approvals  
CE, TÜV-SUD, FCC-B, UL/ cUL, VCCI-B  
19 APPENDIX  
DIMENSIONS  
ProLite T1530SR  
351.0mm/13.8"  
306.0mm/12.0"  
54.0mm/2.1"  
220.0mm/8.7"  
ProLite T1730SR  
392.0mm/15.4"  
340.0mm/13.4"  
64.0mm/2.5"  
250.0mm/9.8"  
ProLite T1930SR  
438.0mm/17.2"  
377.5mm/14.9"  
67.0mm/2.6"  
250.0mm/9.8"  
APPENDIX 20  
COMPLIANT TIMING  
Horizontal  
Frequency  
31.469kHz  
37.861kHz  
37.500kHz  
35.156kHz  
37.879kHz  
48.077kHz  
46.875kHz  
48.363kHz  
56.476kHz  
60.023kHz  
63.981kHz  
79.976kHz  
31.469kHz  
Vertical  
Frequency  
59.940Hz  
72.809Hz  
75.000Hz  
56.250Hz  
60.317Hz  
72.188Hz  
75.000Hz  
60.004Hz  
70.069Hz  
75.029Hz  
60.020Hz  
75.025Hz  
70.087Hz  
Video Mode  
Dot Clock  
25.175MHz  
31.500MHz  
31.500MHz  
36.000MHz  
40.000MHz  
50.000MHz  
49.500MHz  
65.000MHz  
75.000MHz  
78.750MHz  
108.000MHz  
135.000MHz  
28.322MHz  
VGA  
640 × 480  
SVGA 800 × 600  
VESA  
1024 × 768  
XGA  
2
2
3
*
*
*
1280 × 1024  
720 × 400 *1  
SXGA  
VGA TEXT  
*1 The screen is stretched vertically because the screen size ratio is not 4:3.  
*2 Not compliant to ProLite T1530SR.  
NOTE  
*3 Not compliant to DVI input.  
21 APPENDIX  
M023C02  

IBM Data Capture Board CLC CAPT PCASM User Manual
JVC AV 21R318 User Manual
Lenovo ThinkVision L193p User Manual
Magnavox 27MT5005D User Manual
Mitsubishi Electronics CS 35207 User Manual
Panasonic WJ HD316 User Manual
Philips 27TS57C User Manual
Philips Business 150B4AG User Manual
Philips ScanCard SC3136N User Manual
Philips SE6552B User Manual