EXCELLENCE
by
H-CMD4000
MULTIMEDIA DVD/CD/MP3 RECEIVER WITH BUILT-IN 3 TFT DISPLAY
Instruction manual
DVD/CD/MP3
3 TFT
Important safeguards
Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING
PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE!
Read carefully through this manual to familiarize yourself with this high-quality sound system.
Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher
amperage rating may cause serious damage to the unit.
DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or create
safety hazards such as electrical shock or laser beam exposure.
If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car
becomes normal before operating the unit.
DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.
Make sure you disconnect the power supply and aerial if you will not be using the system for a long period
or during a thunderstorm.
Make sure you disconnect the power supply if the system appears to be working incorrectly, is making an
unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified
technician check the system.
The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Please
confirm it before installation.
Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may
overload or burn out the power amplifier.
Do not install the detachable panel before connecting the wire.
Don't remove the detachable panel when encoding.
3
Installation/ connection
First complete the electrical connections, and then check them for correctness.
Installation opening
This unit can be installed in any dashboard having an opening as shown on the
picture. The dashboard should be 4.75 ± 5.56 mm thick in order to be able to support
the unit.
1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver.
Make sure that lock lever
is flush with the mounting collar (not projecting outward).
2. Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber cushion.
3. Insert trim plate.
When you prepare to insert trim plate, please check it s direction. Once it was up side down, it cannot be fixed.
IMPORTANT: Remove
these two screws before
installation. Otherwise,
the DVD Player will not
work
4
Detachable control panel
Detaching the control panel
Turn the Power off.
Press
button to flip down the panel.
Gently press the right side of the panel.
Pull the panel out (see the picture 1).
Pic. 1
Attaching the control panel
Insert the right side of the control panel into the main unit.
Press the control panel left side until the click sound is heard.
Caution:
DO NOT insert the control panel from the left side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful
not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not
to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton
swab soaked in isopropyl alcohol to clean the socket on the back of the control panel.
5
Electrical connection
(Green/White)
(Pink)
6
Caution: Do not interchange the connection of the wiring!!!
For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car
dealer before installing this unit.
Using the ISO Connector
1. If your car is equipped with the ISO connector, then connect the ISO connectors as
illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle
carefully before connecting, incorrect connection may cause serious damage to this
unit.
3. Cut the connector, connect the colored leads of the power cord to the car battery as
shown in the color code table below for speaker and power cable connections.
Location
Function
Connector A
Connector B
1
2
3
4
5
6
7
8
Rear Right(+)---Purple
Rear Right(-)---Purple/Black Stripe
Front Right(+)---Grey
Front Right(-)---Grey/Black Stripe
Front Left(+)---White
Front Left((-)---White/Black Stripe
Rear Left(+)---Green
Rear Left(-)---Green/Black Stripe
Battery 12V (+)/yellow
Auto Antenna/blue
ACC+/red
Ground/black
7
Panel controls
Front panel
1. RELEASE button (
)
Press it to flip down the front panel.
2. DISP button
Use this button to switch the display or to adjust the clock.
3. AF/TA button
Press it to select AF (alternative frequency) function ON or OFF.
Press and hold for 2 seconds to turn TA (traffic announcement) function ON or OFF.
8
4. PTY button
Press it to activate the PTY function. Press PTY button for 2 seconds to choose LOCAL, press it again for 2
seconds to switch to DX.
5. PRESET STATION [1-6] buttons
6. RPT button
Use this button to play current track repeatedly.
7. INT button
Press it to start intro playing (10 seconds).
8. PLAY/PAUSE button
Use this button to start playback. Press it to pause playback.
9. VOL knob/ SEL button
Rotate VOL knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level.
Press SEL button repeatedly to select the modes: BASS => TREBLE => BALANCE => FADER.
Press the SEL button and hold for 2 seconds to enter the menu mode. Press it repeatedly to select the modes:
EQ MODE => LOUD => BEEP => CAMERA => 12/24 AREA => TA MODE => RETUNE => PARKING
MODE => MIRROR IMAGE => TA-VOL => VOL-MODE => A-VOL => SUBWOOFER =>
SUBW-LOL.
Rotate VOL knob to adjust the mode.
10. RDM button
Press to start the random playback.
11. P/N button
Press it to switch the video system (PAL/ NTSC/AUTO).
12. R/L button
Press it to switch the DVD and VCD audio channel (L/R/ST).
13. AMS button
Press it to activate the Radio Auto preset function.
9
14. SRC button
Press to select the source: Radio, Disc play, USB, SD Card, Aux-in.
15. BAND button
Press it repeatedly to select your desired radio band during RADIO mode.
16. IR sensor
17. TFT display
18. PREVIOUS (9)/ NEXT (:) buttons
Use these buttons to enter the manual tuning mode/ seek tuning mode.
Use this button to search for the beginning of the previous/ next track, for backward/ forward track scanning.
19. PWR/ MUTE button
Press PWR button to turn the power on, press and hold for 2 seconds to turn the power off.
When the power is on press it to cut down the volume output, press it again to resume volume.
10
Remote control
1. ZOOM button (for DVD/VCD only)
2. TITLE button (for DVD only)
3. PWR button
4. SETUP button
5. Directional buttons for menu selection
6. ENTER button
7. PROG button
8. Digit area
9. SEL button: press it to select basic sound setting options
10. VOL +/- button
11. MUTE button
12. SEEK +/- buttons: use these buttons to enter the manual
tuning mode/ seek tuning mode.
Use this button to search for the beginning of the previous/
next track, for backward/ forward track scanning.
13. SUB.T button (for DVD only)
14. SRC button: press to select the source: Radio, Disc play, USB, Card, Aux-in
15. REPEAT button
16. A B button
17. STOP button
18. PLAY/PAUSE button
19. GOTO button
20. MENU/PBC button
21. OSD (On Screen Display) button
11
22. AUDIO button
23. DISP button
24. ANGLE button (for DVD discs only)
25. BAND / P/N button: press it repeatedly to select your desired radio band during RADIO mode.
Press it repeatedly in VIDEO mode to select video system: PAL/NTSC/AUTO.
Changing the battery
1. Press the catch and at the same time pull out the battery tray.
2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark
facing upward. Insert the battery tray into the remote control.
Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a
doctor immediately.
Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to
give off heat, crack or start a fire.
When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may give off heat,
crack or start a fire.
12
Back of the front panel
Press the
button on the front panel to flip it down.
1
2
3
4
5
1. Disc slot
2. EJECT button
3. Panel status indicator
4. RESET button
5. SD/MMC card socket
Note: Pressing the RESET button will erase the clock setting and stored stations.
Panel status indicator lights up when you slide the panel down; flashes when you remove the panel.
13
General operation
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press
button on the panel to open the panel and press the RESET button to restore the unit to the original
factory settings.
Power button
Press PWR button to turn the unit on.
Press and hold it for 2 seconds to switch the unit off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the
unit on it will resume the stored status which you set.
Volume control
Rotate the VOL knob on the panel clockwise or press the VOL + on the RC to increase the volume level.
Rotate the VOL knob on the panel anticlockwise or press the VOL - on the RC to decrease the volume level.
Setting the sound characteristics
Press shortly and repeatedly the SEL button to select the audio setting:
BASS => TREBLE => BALANCE => FADER.
Rotate the VOL knob to adjust each setting. The display will show the
following:
Note:
If turning off the power all the settings of each mode will be saved.
If turning off the ACC power all the settings will become as they were set on the plant as current.
14
If you don t adjust VOL knob within 3 seconds after selecting the desired setting, the unit will automatically
return to the current mode being displayed.
Setting other characteristics
During FM mode, keep pressing SEL button for 2 seconds to enter another mode. Shortly and repeatedly press the
SEL button to select the setting: EQ MODE => LOUD => BEEP => CAMERA => 12/24 MODE => TA MODE
=> RETUNE => PARKING MODE => MIRROR IMAGE => TA-VOL => VOL-MODE => A-VOL =>
SUBWOOFER => SUBW-LOL. Press the SEL button again to confirm.
The display will show the following picture:
1. EQ MODE: rotate the VOL knob to select: ROCK => POP => CLASSIC
=> FLAT => EQ OFF.
2. LOUD: rotate the VOL knob to select: ON or OFF.
3. BEEP: rotate the VOL knob to select beep sound ON or OFF.
4. CAMERA: rotate the knob to turn rear camera ON or OFF. While the unit camera is in ON mode, press the
SEL knob more than 2 seconds to return to camera OFF mode. Under camera ON mode, the SRC button is
invalid (camera should be connected to the unit).
5. 12/24 MODE: rotate the VOL knob to select: 12 or 24 hours clock mode.
6. TA (Traffic Announcement) MODE
To determine what action will the radio take if the newly tuned station does not receive TP (Transport
Program) information for 5 seconds. Rotate the VOL knob to select the desired mode: TA ALARM and TA
SEEK.
- TA SEEK
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station
which has not the same station (PI ± Program Information) as the last station, but has the TP information.
When TP information gets lost at the current station for retune time which is set by RETUNE SHORT (60
seconds) or RETUNE LONG (90 seconds), the radio starts to retune to next same PI station. When same
PI station does not catch in 1 cyclic search, the radio retunes to next station with TP information.
15
- TA ALARM
During searching the radio does not retune but the double beep sound (alarm) is output.
7. RETUNE: To determine the initial time of automatic TA (Traffic Announcement) search.
There are 2 modes: RETUNE L and RETUNE L.
- RETUNE L: 180 seconds.
- RETUNE S: 45 seconds.
Note: Retune mode is active for TA SEEK mode only.
8. PARKING MODE: rotate the VOL knob to turn rear parking attention ON or OFF. While unit is in parking
ON mode, during playback the screen will show Do not watch video while driving , and blank screen will
appear.
9. MIRROR IMAGE: rotate the VOL knob to select the camera video ON or OFF.
10. TA-VOL: adjust the TA volume level by rotating the VOL knob.
11. VOL-MODE: rotate the VOL knob to select: VOL LAST or VOL ADJUST.
12. A-VOL: adjust the A-VOL volume level by rotating the VOL knob.
13. SUBWOOFER: rotate the VOL knob to select subwoofer frequency: 80 Hz => 100 Hz. => 120 Hz => OFF.
14. SUBW-LOL: adjust the subwoofer level by rotating the VOL knob.
Turning the sound off
When the power is on press the PWR/MUTE button on the panel or MUTE button on the RC to turn the sound off.
Press it again to turn the sound on.
Source setting
Press the SRC button repeatedly to select press to select the source: RADIO => DISC PLAY => USB (if the USB
device is inserted) => CARD (if the SD/ MMC card is inserted) => AUX-IN.
If you select RADIO mode, press BAND button once or more to select: FM1, FM2, FM3, FM (OIRT), MW1,
MW2.
16
Display operations
Press the DISP button to show the following current tuning information and time in any play mode:
PS (Default) => PTY => Radio frequency => CT.
For DVD mode
1. When the DVD disc is loaded press the SRC
button repeatedly to select DVD mode.
2. Press the DISP button. The display will
show:
For AUX mode
1. When the DVD disc is loaded press the SRC
button repeatedly to select AUX mode.
2. Press the DISP button. The display will
show:
Setting the time
1. Press the DISP button and hold for 2 seconds, minute will start blinking. Rotate the VOL knob to set minutes.
Press the VOL knob, the hour will start blinking. Rotate the VOL knob to set hour.
2. Press the DISP button to confirm.
17
Digital tuner
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not
available in you area, the following service is not available, either.
Band selection
Press PWR to power on, then press the SRC button to select RADIO.
Press BAND once or more to select: FM1, FM2, FM3, FM (OIRT), MW1, MW2. Display will show the wave
band, frequency and preset station number if already stored, see the following picture:
Manual/ automatic tuning
Manual tuning: Press the 9/ : buttons on the panel or on the RC repeatedly to select a station downward
or upward step by step. Press the 1-6 preset buttons to store the station found.
Automatic tuning: Press the 9/ : buttons and hold for 2 seconds, the automatic search will start. It will
play when finds the station. Press the 1-6 preset buttons to store the station found.
18
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (24 FM, 12 MW), manually or automatically.
To store a station:
-
Select a band (if needed)
-
-
Select a station by 9/ : buttons
Hold a Preset button (1-6) which you want store the station for at least 2 seconds.
To recall a station:
-
-
Select a band (if needed)
Press a Preset button (1-6) briefly to recall the stored station
OR:
During radio mode press the 9/ : buttons to select downward or upward stored stations.
AMS (Auto Memory Store) function
Preset scan: press AMS button to scan all preset stations in the memory of the current band and stay on each
memory stations for about 5 seconds. The memory location indicator on the LCD will flash during the
process. To stop preset scan, press AMS button again.
Auto memory store: press AMS button for more than 2 seconds to enter auto store mode. The radio will
automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop
auto store, press AMS button again.
AF (Alternative Frequencies) function
When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search
another station with the same PI (Program Identification) as the current station but with stronger signal strength.
PS (Program Service name): the name of station will be display instead of frequency.
19
1. Press AF/TA button shortly to turn ON or turn OFF the AF function.
AF indicator on display will flash until RDS information is received.
2. If RDS service is not available in your area, turn off the AF mode.
Default setting is ON.
TA (Traffic Alarm) function
Press the AF/TA button and hold for 2 seconds to turn ON or turn OFF the TA function.
In TA mode traffic program will be automatically searched, until the program is received.
When traffic announcement is received, the TA indicator will display. The unit will temporarily switch to the
tuner mode (regardless of the current mode) and begin broadcasting the announcement at TA volume level. After
the traffic announcement is over, it will return to the previous mode and volume level. When TA is turned on,
SEEK, SCAN, AMS function can only be received or saved when traffic program identification (TP) code is
received.
PTY (Program Type)
1. Press PTY button to activate the PTY function. The previous PTY type is shown.
2. Press PTY once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons 1
- 6 to select the desired program type (see the following table).
20
3. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the
corresponding PTY information is detected.
If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop, if desired PTY
is not found, NO PTY is flashed, then return to previous normal radio and PTY word disappears.
4. Press PTY button for the 3rd time to switch the PTY function off.
REG function
Press and hold PTY button for 2 seconds to switch between REG ON and REG OFF mode.
-
-
REGION ON: PI code will be searched during AF searching.
REGION OFF: PI code and covered area will not be searched.
EON (Enhanced Other Networks)
When EON data is received, the EON indicator lights and the TA and AF functions are enhanced.
TA: Traffic information can be received from the current station or stations in other network.
AF: The frequency list of preset RDS stations is updated by EON data. EON enables the radio to make fuller use
of RDS information. It constantly updates the AF list of preset stations, including the one that currently tuned
into. If you preset a station around the area at your home, you will later be able to receive the same station at an
alternative frequency, or any other station serving the same program, EON also keeps track of locally available
TP stations for quick reception.
21
SD/ MMC/ USB operations
Inserting the SD/ MMC card/ USB device
1. Turn the power on.
2. Press the
button on the panel to flip it down.
3. Insert the MMC/ SD card or USB device into MMC/ SD or USB slot. Then the playing mode will be changed
into SD Card or USB mode automatically. The unit will read the files automatically.
Note: When SD/MMC card and USB device are both inserted into their compartment or socket, the playing
mode will be changed into the mode of the later one. You can also select the source by pressing the SRC button.
USB/SD/MMC notes:
USB functions (flash memory type) MP3 music play.
1. SD/ MMC card support.
2. USB flash memory 2in1 (SD/ MMC) support.
3. FAT 16/ FAT 32 is possible
- FAT 16 (dir: 200 support, file:500 support),
- FAT 32 (dir: 200 support, file:500 support).
4. Filename: 32 byte/ Dir name: 32byte.
5. Tag (id3tag ver2.0)
- Title/ Artist/ Album: 32 byte support.
6. Multi card reader not support.
7. USB 1.1, 2.0 support.
Note:
USB format supports 1.1, 2.0.
Capacity: 8 MB ~ 1 GB.
22
SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc.
Capacity: 8 MB ~ 1 GB.
MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc.
Capacity: 16 MB ~ 1 GB.
Glossary
PBC (PlayBack Control)
PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it
can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can
playback high definition of still image.
Title
The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to
record several films on one disc. For example, if a disc contains three films, they may be divided into Title 1, Title
2 and Title 3. You can easy use the functions of looking-for.
Chapter
A title can be divided into several blocks, so that every block can be operated as a unit, the unit is called chapter.
The chapter contains a unit at least.
Track
It is the biggest component of VCD. Generally, every song of karaoke disc is a track.
23
Disc operations
Discs for playback
This unit can play all digital audio CD, DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/
Picture-CD/JPEG/CD-R/-RW/DVD±R/±RW.
The following file types are supported:
Audio files: MP3 (*.mp3)
WMA (*.wma)
Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID)
MPEG 2(*.vob)
MPEG 1(*.dat)
Picture file: JPEG (*.jpg)
ISO 9660 or ISO 9660 +Joliet format - Max. 30 characters
Max. Track number is 448
Max. nested directory is 8 levels
The max. album number is 99
The max. length of each track is 99 minutes 59 seconds
Supported sampling frequency for MP3 disc: 8 KHz to 48 (44.1 KHz preferably) KHz
Supported bit-rates of MP3 disc are: 32 - 320 kbps (128 kbps preferably).
Following formats are NOT supported *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO, files with DRM.
Open session discs are NOT supported.
Loading a disc
1. Turn the power on.
2. Press the
button on the panel to flip it down.
3. Insert the disc with the printed side facing upward into the slot. The display will show LOAD.
24
For VCD/CD, VCD or CD icon will appear on the display.
While MP3/WMA files playback, the root folder s names and MP3/WMA files will appear on display.
For DVD, DVD icon will appear on the display and TITLE appears.
4. Press EJECT button on the inner side to eject the disc.
Playing/ pausing
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
Press the PLAY/ PAUSE button to start/ pause the playback. In pause mode press it again to resume the playback.
Playing the previous/ next track
1. During playback press the 9 button to start playback of the previous track.
2. Press the : to start playing of the next track.
3. Press the digital buttons (1-9, 0, 10+) buttons to enter the desired track number.
Scanning forward and backward
Press and hold for 2 seconds the 9 or : buttons to select the speed of fast playing in backward or forward
direction: X2, X4, X8, X20. Press the PLAY/PAUSE button to return to normal playback.
Note: During the disc playback when Fast/ Reverse Playback gets to the beginning of the playing another track,
it resumes normal playback.
Repeat playback
Press the RPT button on the panel or REPEAT button on the RC once or more to repeat the playback:
For VCD/CD: display appears RPT ONE => RPT ALL => RPT OFF
For DVD: display appears RPT CHAP => RPT TITL => RPT OFF
For File disc: display appears RPT ONE => RPT DIR => RPT ALL => RPT OFF
RPT icon will appear on the display.
25
Repeat A-B function
1. During playback, press A-B button on the remote control at the starting point of the section you want to
repeat (point A).
2. Press A-B button again at the ending point of the section you want to repeat (point B). Section A-B repeating
starts.
3. Press A-B button again to cancel the A-B repeat function.
Random playback (for CD/VCD/MP3 discs)
During disc playback, press the RDM button to start random playback of the disc. Press again to cancel.
Intro playback (for CD/VCD discs)
You can play the beginning of every track for 15 seconds in sequence. Press the INT button to start intro play of
whole disc. Press again to cancel.
GOTO function
You can go to the desired track/ chapter or time point directly.
1. During the disc playback press the GOTO button on the RC. The display will show: Track/ Title/ Chapter/
Time. Current item is highlighted.
2. Press the
/
buttons to select the desired item.
3. Press ENTER to confirm.
PBC (Playback Control) function (for VCD only)
If you insert a VCD with PBC, playback starts from the beginning of the 1st track automatically.
1. Press PBC button to activate interactive menu on screen during playback.
2. If the menu consists a list of titles, you can select a desired one using the 9/ : buttons or the digit buttons.
26
3. The VCD starts playing the selected title automatically or press PLAY/ PAUSE button to confirm the
selected track for playback.
4. Press STOP button to return to menu.
5. Press PBC again to exit menu.
Programming the playback
1. Press PROG button to enter program list.
2. Use ,
,
,
buttons and digit buttons to enter the number of the
desired track to be on selected position.
For DVD and File disc, select title and chapter number.
For VCD and CD, select track number.
3. Press PLAY/ PAUSE button to play, or move the cursor to select PLAY
and press ENTER to play.
4. If you want to delete the list, move the cursor to CLEAR, press ENTER
to delete all the list set before.
5. Press PROG again to exit program play.
Selecting different audio modes
For DVD disc: press R/L button on the panel or AUDIO on the RC repeatedly to select the audio language to
listen (if the disc supports multi-language mode).
For VCD disc: press R/L button on the panel repeatedly to select the following modes:
L
R
STEREO (Channel left => Channel right => Stereo).
27
Changing the subtitle language (for DVD only)
Subtitle language is in disc initiation setting during playback. Press SUB.T button to switch among
disc-supported languages. If the disc only supports one subtitle, the function will not work. If no operation within
5 seconds, language description will disappear.
Using the TITLE (for DVD only)
1. Press TITLE to display title or chapter list.
2. Press
,
,
,
buttons or digital buttons to make a selection.
3. Press ENTER. The player will start playing the selected title.
Changing angle (for DVD only)
If DVD discs support multi-angle playback, press ANGLE button to playback images in different camera angles.
If discs doesn't support multi-angle playback, this function will not work. If no operation within 1 second, angle
description will disappear.
Changing size
Press ZOOM. The picture will be enlarged accordingly:
28
Audio/ Video/ Picture file operations
When AUDIO/ PICTURE/ VIDEO file is played, Category/ Folder/ File list will be displayed on the screen, and
file/ folder name being played will be displayed on top. Current selected item will be highlighted.
Category Select
1. Use
/
to select:
AUDIO
PICTURE
VIDEO.
2. Press ENTER to confirm.
Folder select
1. Use
/
to enter folder list and use
/
to s
desired folder.
2. Press ENTER to confirm.
File select
1. Use
/
to enter file list and use
/
to select desired file.
2. Press ENTER to playback.
3. Press STOP button to return.
For PICTURE, press PLAY/ PAUSE to slide show the pictures. Press PROG to select picture showing style.
For MUSIC, press STOP button to enter intro logo, then press PLAY/ PAUSE button to return.
29
MP3 overview
Notes on MP3:
MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.
This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.
The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the
MP3 data written by the method of packet write.
The unit can not read an MP3 file that has a file extension other than .mp3 .
If you play a non- MP3 file that has the .mp3 extension, you may hear some noise.
In this manual, we refer to what are called MP3 file and folder in PC terminology as track and
album , respectively.
Maximum number of directory level is 8, including the root directory. Maximum number of files and folders
per disc is 448.
The unit may not play tracks in the order of Track numbers.
The unit plays only the audio tracks if a disc contains both audio tracks and MP3 files.
When playing a disc of 8 kbps or VBR , the elapsed playing time in the display window will not be correct
and also the intro play may not function properly. VBR : Variable Bit Rate.
Notes on creating your own CD-R or CD-RW containing MP3 files:
To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz
and a fixed bit rate o f 128 kbps.
DO NOT store more than 448 MP3 files per disc.
For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root
directory (folder).
When CD-R disc is used, playback is possible only for discs, which have been finalized.
30
Make sure that when MP3 CD-R or CD-RW is burned that it is formatted as a data disc and NOT as an audio
disc.
You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes
a long time until the unit starts to play MP3 files.
With some CD-R or CD-RW media, data may not be properly written depending on its manufacturing
quality. In this case, data may not be reproduced correctly. High quality CD-R or CD-RW disc is
recommended.
Up to 16 characters are displayed for the name of an Album or a Track. ID3TAG version 1.x is required.
Note that the unit may not play Tracks in the order that you wrote them to the disc.
31
DVD setup
Press SETUP button on the remote control to display DVD setup screen. Use
the cursor buttons to select the desired option or item. Press ENTER button to
confirm option.
System setup
Setting TV system
Select the TV system in the setting menu.
Setting Screen saver
The screen saver appears when the stop, opening, or no disc status last more
than 3 minutes.
The screen protection function is to prevent the unit from being broken.
Open: Open the screen protection.
Close: Close the screen protection.
Setting from the factory: ON.
32
Setting Video output
Original setting: INTERLACE-YUV.
Setting TV type
4: 3PS (pan scan): It is adapted to the TV with common size. The left and
right edge of the picture will be cut off and project the picture to the whole
screen, when play the wide screen picture.
4: 3LB (letter box): Please select it for the TV with common size. There will
be black frame on the front and bottom side of the TV screen when play the
wide screen picture.
16:9 (wide screen): Select it when the unit is connected with the wide screen
TV.
Setting Password
This item is originally set as locked status. Under this status, we can not
make the selection on the RATING item or change the password. If you
want to set the RATING , please input the password or the original
password 0000 (if you set it for the first time). Then press the ENTER
button to unlock. If you want to change the password, please input the
original password and press ENTER button, then input the 4-digit new
password and press the ENTER button to finish the setting.
Setting Rating
When play the disc with lock function, you can select the proper age control
rating according to the rating of the disc and your requirement.
The rating of the disc is from 1 to 8:
(1) with the most limit when playing.
33
(8) with the least limit when playing.
Original setting: 8.
Note: The rating can be selected only under the password setting status.
Default setting
If this item is selected, the unit will become the original setting.
Language setup
Setting OSD Language
Press the cursor button and the ENTER button to select the desired language.
Setting Audio Language
Select a kind of language for the DVD disc audio from the languages which
are contained in the DVD disc.
34
Setting Subtitle Language
Setting Menu Language
Select a kind of language for the subtitle of DVD disc from the languages
which are contained in the DVD disc.
Select a kind of language for the menu of DVD disc from the languages
which are contained in the DVD disc.
Audio setup
Digital Output
Select the digital output format.
APDIF/OFF: There is no signal output from the coaxial or optical output end.
SPDIF/RAW: When the unit is connected with the amplifier by coaxial or
optical connecter, please select this mode.
SPDIF/PCM: When the unit is connected with the two channels digital stereo
amplifier, please select this mode.
Setting Volume
Setup the volume with the UP/DOWN buttons.
35
Video setup
Setting Brightness
Set the brightness of the video output with UP/DOWN buttons.
Set the contrast of the video output with UP/DOWN buttons.
Setting Contrast
Setting hue
Set the hue of the video output with UP/DOWN buttons.
Setting Saturation
Set the saturation of the video output with UP/DOWN buttons.
36
Setting Sharpness
Set the sharpness of the video output with UP/DOWN buttons.
Digital setup
Output Mode
Select the output mode:
LINE OUT: Compress the input signal. The volume is small.
RF REMOD: The volume is large.
Dynamic Range
When you select the compressed mode as line out , select it to adjust the
compression proportion and get the different compressed effect.
When select FULL, the audio signal is minimum; when select OFF, the audio
signal is maximum.
Dual mono setting
Select the audio channel from STEREO, MONO L, MONO R and MIX
MONO.
37
Anti-theft system
Remove the panel
1. Press the PWR button to turn the power off.
2. Press
button to flip down the panel.
3. Gently press the right side of the panel.
4. Pull the panel out.
5. Place the panel into the case and take it with you when you leave the car.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole on the front of the set until they lock.
3. Pull out the unit.
38
Handling discs
Dirty, scratched or warped discs may cause skip ping or noise.
Handle the disc only by the edges. To keep clean do not touch its surface.
Discs should be stored in their cases after use to avoid scratches.
Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during
summertime).
Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks used in some
felt-tip pens, may damage its surface.
DO NOT touch the unlabeled side. DO NOT attach any seal, label or data protection sheet to either side of a
disc.
Cleaning
Cleaning the cabinet
Wipe with a soft cloth. If the cabinet is very dampen (not dropping wet) the cloth with a weak solution of soapy
water, and then wipe clean.
Cleaning discs
Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records,
compact discs have no grooves to collect dust and macroscopic dirt, so gently wiping them with a soft cloth
should remove must panicles. Wipe in a straight motion from the center to the edge.
Never use thinner benzine, record cleaner or anti static spray on a compact
disc. Such chemicals can damage its plastic surface.
39
Troubleshooting guide
Cause
Solution
Symptom
The car ignition is not on.
The fuse is blown.
If the power supply is properly connected to the car
accessory switch the ignition key to ACC .
Replace the fuse.
General
No power
Presence of disc inside the player.
Inserting the disc in upside down.
Remove the disc in the player then put a new
upward.
Disc
Disc cannot be loaded.
Disc cannot be read.
Insert the compact disc with the label facing
Compact disc is extremely dirty or upward.
defective.
Clean the disc or try to play a new one.
Temperature inside the car is too high.
Cool off until the ambient temperature returns to
normal.
No sound
Volume is in minimum.
Adjust volume to a desired level.
Check wiring connection.
Wiring is not properly connected.
The operation keys do not The built-in microcomputer is not Press the RESET button.
work.
operating properly due to noise.
Front panel is not properly fix into its
place.
Reinstall the front panel.
Sound skips.
The installation angle is more than 30
degrees.
Adjust the installation angle to less than 30
degrees.
The disc is extremely dirty or defective.
The antenna cable is not connected the
Clean the compact disc/try to play a new one.
Insert the antenna cable firmly select a station
manually.
The radio does not work,
the radio station automatic signals are too weak.
selection does not work.
40
Specification
General
Power supply:
12 V DC
Current consumption:
Maximum power output:
Compatible formats:
max. 10 A
50 W x 4 channels
DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG/CD
-R/ -RW/DVD±R/±RW playback
Dimensions (L x W x H) / weight: 178 x 166 x 50 mm / 2.2 kg
Working temperature range:
ESP function:
-10º
- +60º
40 sec. for Audio CD, 120 sec. for MP3
TFT display
Screen size:
3.0 inch
960x240 dpi
4:3
Resolution:
Aspect ratio:
Contrast ratio:
300
Brightness:
350 nits
FM Stereo Radio
Frequency range:
Usable sensitivity:
Preset memory stations:
MW section
65.0 ± 74.0 / 87.5 ± 108.0 MHz
6 uV
24
Frequency range:
522 kHz - 1620 kHz
12
Preset memory stations:
41
Audio specification
Maximum output:
Frequency response:
S/N ratio(A-vtd):
2 Vrms (+/- 3 dB)
20 Hz - 20 KHz
60 dB
DSP sound effect:
Line out
Classic, Rock, Pop, Flat
Output:
CD max 2000 mV
Specifications are subject to change without notice. Mass and dimension are approximate.
42
!
.
,
,
.
....................................................................................................................................................43
...............................................................................................................................44
...............................................................................................................................45
.......................................................................................................................................49
.......................................................................................................................................55
............................................................................................................................................60
/
SD/ MMC/ USB
................................................................................64
.........................................................................................................................66
...............................................................................................................................67
3 .....................................................................................................................................................73
..................................................................................................................................81
....................................................................................................................................81
.................................................................................................................................................82
...............................................................................................83
........................................................................................................................84
43
-10º
.
!
,
.
.
.
,
,
,
.
.
,
,
.
,
.
,
,
.
,
,
,
,
.
.
,
,
,
.
,
,
,
.
.
,
.
,
.
.
,
.
.
.
44
/
,
.
.
4,75 ± 5,56
,
1.
.
,
(
).
2.
3.
.
.
.
,
,
.
,
.
:
.
CD/MP3
.
45
.
,
.
.
. 1
(
. 1).
1.
,
,
.
2.
3.
,
.
,
.
,
.
:
.
.
:
,
.
.
.
,
,
.
:
,
.
,
.
46
(
)
(
)
47
:
!!!
,
(
),
.
.
ISO
1.
2.
ISO,
.
,
ISO
,
.
3.
,
.
A
B
1
2
3
4
5
6
7
8
(+)---
(-)---
(+)---
(-)---
(+)---
((-)---
(+)---
(-)---
12 (+)/
/
ACC+/
48
1.
2.
3.
,
.
DISP
,
.
AF/ TA
,
AF (
).
2
,
TA
49
).
4.
PTY
2
,
.
,
LOCAL,
[1-6]
,
DX.
5.
6.
RPT
.
7.
8.
9.
INT (
10
)
,
.
Intro.
10
PLAY/PAUSE
,
.
.
,
VOL/
SEL
,
,
,
.
(
SEL),
: BASS => TREBLE => BALANCE => FADER.
.
,
2
,
.
SEL,
: EQ MODE => LOUD => BEEP => CAMERA => 12/24 MODE => TA
MODE => RETUNE => PARKING MODE => MIRROR IMAGE => TA-VOL => VOL-MODE =>
A-VOL => SUBWOOFER => SUBW-LOL.
,
.
10.
RDM
,
.
50
11.
12.
13.
14.
P/N
,
,
,
(PAL/ NTSC/ AUTO).
DVD VCD (L/R/ST).
AMS.
R/L
AMS
SRC
,
: Radio (
) => Disc play (
) => USB => Card
(SD/MMC
) => USB => Aux-in.
15.
B ND
B ND
RADIO.
16.
17.
18.
.
.
9/:
/
/
.
19.
PWR/ MUTE
,
.
,
.
,
.
,
.
51
1.
2.
ZOOM (
TITLE (
DVD/VCD
)
)
DVD
3.
4.
PWR
DVD SETUP
5.
6.
ENTER
7.
PROG
8.
9.
SEL -
10.
11.
12.
VOL+/-
MUTE
,
,
9/:
13.
14.
SUB.T (
DVD
) => Disc play (
)
SRC: Radio (
) => USB => Card (SD/MMC
) =>
USB => Aux-in.
15.
16.
17.
18.
19.
REPEAT
GOTO
A
B
STOP
PLAY/PAUSE
52
20.
21.
22.
23.
24.
25.
MENU/PBC
AUDIO
DVD
OSD
)
DISP
ANGLE (
BAND / P/N:
RADIO.
,
: PAL/ NTSC/ AUTO.
:
1.
2.
,
.
(CR 2025 3V),
.
3.
.
:
.
,
.
(
± 6
).
.
.
53
OPEN
EJECT
.
1
2
3
4
5
1.
2.
3.
4.
5.
EJECT
RESET
SD CARD
:
.
,
,
.
54
.
.
RESET,
,
.
:
,
.
PWR,
.
2
,
.
:
,
,
.
VOL +
VOL -
,
.
,
.
SEL (
: BASS (
) => BALANCE (
/
),
) => TRE LE (
) => FADER
/
).
55
,
.
:
.
.
3
,
,
.
2
SEL,
.
SEL (
),
: EQ MODE => LOUD => BEEP => CAMERA => 12/24 MODE
=> TA MODE => RETUNE => PARKING MODE => MIRROR IMAGE
=> TA-VOL => VOL-MODE => A-VOL => SUBWOOFER =>
SUBW-LOL.
1.
2.
3.
EQ MODE:
,
: ROCK => POP => CLASSIC => FLAT => EQ OFF (
.
.)
LOUD:
,
LOUD ON ( .) => LOUD OFF (
.)
BEEP:
2
:
- BEEP ON:
- BEEP OFF:
.
.
4. CAMERA:
,
(
).
SEL
2
,
.
SRC
.
5.
12/24 MODE:
24-
,
: 12-
.
56
6.
MODE (
TA
)
TA,
TP (
.
)
,
,
: TA
SEEK
- TA SEEK:
ALARM.
,
TP (Traffic Program ±
)
- RETUNE SHORT (60
)
RETUNE LONG (90
),
,
,
PI (
TP.
),
.
-
ALARM:
RETUNE
,
.
8.
8.
Retune-S
- Retune S:
- Retune L:
:
Retune-L
TA Seek.
,
,
TA SEEK 30
TA SEEK 90
.
.
Retune
TA
TA SEEK.
PARKING MODE:
.
,
«
»,
.
9.
MIRROR IMAGE:
TA VOL:
VOL-MODE:
A-VOL:
,
10.
11.
12.
13.
,
.
,
VOL LAST
.
ADJUST.
,
SUBWOOFER:
,
: 80
=>
100
=> 120
=>
. (OFF).
14.
SUBW-LOL:
,
.
57
,
PWR/MU
,
.
,
.
SRC,
: RADIO (
) => DISC PLAY (
)
=> USB (
USB
) => CARD (
SD/MMC
) => AUX-IN.
RADIO
BAND,
: FM1, FM2,
FM3, FM (OIRT), MW1, MW2.
DISP,
:
=>
=>
=>
.
DVD
1.
2.
DVD
,
DVD,
DVD.
DISP,
:
LOUD
./
./
.
./
.
./
.
.
58
AUX
DVD
1.
2.
,
DVD,
AUX.
DISP,
:
LOUD
./
./
.
./
.
./
.
.
1.
2.
DISP
2
.
,
.
,
.
,
,
.
.
DISP,
.
59
:
RDS (
)
.
,
RDS
,
.
PWR,
.
.
SRC,
- RADIO.
MW1, MW2.
B ND,
,
: FM1, FM2, FM3, FM (OIRT),
,
(
):
/
:
9
:,
.
,
.
.
:
9
:
2
,
.
,
60
.
,
.
,
.
.
6
5
.
:
-
-
-
(
).
).
9/:.
1~6,
.
:
(
-
-
1~6.
:
9/:,
.
:
AMS,
.
5
.
,
AMS.
:
AMS
2
, 6
1~6.
,
AMS.
61
AF (
)
,
,
.
.
1.
2.
AF/TA,
RDS
AF.
.
AF
,
.
AF
,
.
RDS
,
AF.
ON ( .)
TA (
)
2
AF/ A,
.
.
.
,
,
(TA-VOL).
.
TA
SEEK, SCAN, AMS
.
PTY (
)
FM-
1.
,
RDS,
.
PTY,
PTY.
.
2.
PTY
.
,
:
6
62
.
:
3.
4.
PTY
.
,
2
.
,
.
,
NO
PTY,
, NO PTY
.
PTY
,
PTY.
REG
PTY
.
2
,
REG ON
REG OFF.
-
-
REGION ON (
REGION OFF (
):
AF
,
REGION ON.
):
AF
.
63
EON (
)
EON
EON,
TA
AF
.
TA:
,
.
AF:
.
EON
,
,
.
,
,
,
.
EON
.
SD/ MMC/ USB
SD/ MMC/ USB
1.
2.
3.
.
,
USB
.
SD/MMC
.
.
.
:
,
,
.
SRC.
64
USB/ SD/ MMC
MP3 USB
SD/ MMC.
2 1 (SD/ MMC).
:
(
).
1.
2.
3.
USB
FAT 16/ FAT 32
- FAT 16 (
- FAT 32 (
200
200
, 500
, 500
: 32
),
).
1.
2.
: 32
/
.
(id3tag ver 2.0)
/
-
/
:
32
.
6.
7.
.
USB 1.1, 2.0.
:
USB:
SD:
USB 1.1, 2.0.
SD
: 8 M ~ 1
.
: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq,
Sharp, Samsung,
. .
: 8 M ~ 1
.
MMC:
MMC
.
: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems,
.
: 16 M ~ 1
65
PBC (
)
±
,
.
,
PBC,
.
.
±
DVD-
.
,
.
,
,
1,
2
3.
.
,
.
.
.
±
.
,
,
.
66
CD,DVD/SVCD/VCD/HDCD/MP3/
MP4/WMA/CDDA/Picture-CD/JPEG/CD-R/-RW/DVD±R/±RW.
:
: MP3 (*.mp3)
WMA (*.wma)
: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID)
MPEG 2(*.vob)
MPEG 1(*.dat)
: JPEG (*.jpg)
ISO 9660
ISO 9660 +
Joliet -
± 448.
30
.
- 8
± 99.
.
- 99
59
MP3
.
:
8
48
(
(
44,1
128
).
P3
: 32 - 320
).
: *.ACC, *.DLF, *.M3U, *.PLS, MP3 PRO,
.
DRM.
67
1.
2.
3.
.
,
.
.
.
LOAD (
:
).
VCD/CD
MP3/WMA
DVD
VCD
CD
.
,
.
.
DVD
.
4.
EJECT,
/
,
,
,
PLAY/PAUSE,
.
PLAY/PAUSE,
.
.
,
1.
9,
.
2.
3.
:,
.
1-9, 0, 10+
.
9
:
2
,
: 2, 4, 8, 20.
.
PLAY/PAUSE,
68
:
,
,
.
R
REPEAT
,
:
VCD/CD
:
RPT ONE (
.
) => RPT ALL (
) => RPT TITL (
. => RPT DIR (
.
) => RPT OFF
) => RPT OFF
) => RPT
).
DVD
).
:
RPT CHAP (
:
RPT ONE ()
).
.
ALL (
.
) => RPT OFF (
RPT.
(
CD/VCD)
RDM,
.
,
.
Intro (
CD/VCD)
15
.
INT,
.
,
.
GOTO
,
,
.
69
1.
GOTO,
:
=>
=>
=>
.
.
2.
3.
.
ENTER,
.
PBC (
) (
VCD
)
VCD
PBC,
1-
.
1.
,
.
2.
3.
,
9/:
±
.
,
PLAY/ PAUSE,
.
4.
5.
STOP
,
,
VCD.
.
DVD
1.
PROG,
.
,
,
,
,
.
DVD
VCD CD
MP3, VCD, CD
.
.
70
2.
PLAY/ PAUSE
ENTER,
«PLAY»
.
3.
4.
,
«CLEAR»
ENTER.
PROG,
.
DVD
:
:
R/L
,
AUDIO
,
(
).
VCD
: L
R/L
,
R
STEREO (
).
(
DVD
)
.
SUB.T
.
,
.
5
,
.
(
DVD
)
1.
2.
3.
TITLE,
.
,
,
,
.
.
ENTER.
/
71
(
DVD
)
DVD-
,
,
ANGLE
.
,
.
1
.
ZOOM.
:
.
/
/
/
,
,
,
,
.
.
1.
2.
/
:
AUDIO
PICTURE
VIDEO.
ENTER,
.
72
1.
2.
1.
/
/
.
ENTER,
/
.
,
/
.
2.
3.
ENTER,
STOP,
.
.
PLAY/ PAUSE,
.
,
PROG,
STOP,
15
,
PLAY/ PAUSE,
.
3
3:
3
MPEG 3
3
.
CD-ROM, CD-R
CD-RW.
ISO 9660.
3,
,
3,
3
.
3,
,
.mp3 .
,
.mp3 ,
MP3
.
,
,
PC
.
73
8,
.
448.
.
,
,
3.
8
VBR,
,
. VBR:
44,1
.
CD-RW,
CD-R
MP3:
3
128
.
448
3
.
,
ISO 9660,
8,
(
).
CD-R
MP3 CD-R
3
,
.
,
CD-RW
,
,
.
3
,
3.
CD-R
CD-RW
.
.
CD-R
CD-RW
.
16
.
1. ID3TAG.
,
,
.
74
DVD
SETUP,
:
.
/
,
,
,
,
,
.
/
,
.
ENTER,
.
ENTER,
.
.
,
,
3
.
.
,
.
:
:
.
:
.
75
: INTERLACE-YUV.
4: 3PS (pan scan):
.
,
.
4: 3LB (letter box):
.
.
16:9 (wide screen):
.
«
».
.
,
«0000» (
ENTER
).
.
,
ENTER,
ENTER
4-
.
76
,
.
1
8:
1 -
8 -
.
.
8.
(
).
ENTER
.
,
DVD-
,
.
77
,
DVD-
,
.
,
DVD-
,
.
:
:
.
SPDIF/RAW:
,
.
SPDIF/PCM:
,
.
UP/DOWN
.
78
.
.
.
.
79
.
:
LINE OUT:
.
.
RF REMOD:
.
line out ,
,
.
Full ,
,
Off ,
.
: STEREO, MONO L, MONO R MIX
MONO.
80
1.
2.
3.
4.
5.
,
PWR.
,
.
.
.
,
.
1.
2.
3.
.
,
.
.
,
(
).
,
.
,
.
,
,
.
(
,
).
81
.
,
,
.
,
.
,
.
.
(
),
,
,
.
.
,
,
,
.
.
,
,
.
.
82
.
,
.
.
.
.
,
.
.
.
.
.
.
,
.
.
.
.
.
RESET.
.
.
.
30
.
,
30
.
.
.
.
.
.
.
.
83
:
12
:
10
: 50
4
:
DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG/C
D-R/ -RW/DVD±R/±RW
178 166 50
(
):
:
-10º - +60º
ESP
40
CD, 120
3
:
:
960 240 dpi
:
4:3
:
300
350
:
FM
:
:
65.0 ± 74.0 / 87.5 ± 108.0 MHz
:
6
24
MW
522-1620
12
84
2
RMS (+/-3
)
:
:
20
60
± 20
(A-vtd):
DSP
Classic, Rock, Pop, Flat
CD . 2000
.
.
85
|