|
User’s Guide
vp15 LCD Monitor
vp17 LCD Monitor
vp19 LCD Monitor
FP1707 LCD Monitor
WF1907 LCD Monitor
w1907 LCD Monitor
w2007 LCD Monitor
w2207 LCD Monitor
Notational Conventions
The following section describes notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon. These blocks are notes, cautions, and
warnings, and they are used as follows:
ÅWARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss
of information.
Ä
Text set off in this manner indicates additional information.
✎
User’s Guide
iii
iv
User’s Guide
Contents
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Maintenance Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Removing the Monitor Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Removing the cantilever base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Removing the column base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2
Folding the Double-Hinged Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3
Unpacking the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Installing the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Installing the HP LCD Monitor on a Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Unfolding the double-hinged monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Assembling the cantilever base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3
Assembling the column base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3
Wall-Mounting the Monitor (Mounting Fixture not Supplied) . . . . . . . . . . . . . . . . . . . . . . . . 4–4
Preparing the double-hinged monitor for wall-mounting. . . . . . . . . . . . . . . . . . . . . . . . . 4–4
Preparing the cantilever-base monitor for wall-mounting . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Preparing the column-base monitor for wall-mounting . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
To reinstall the desktop pedestal and base for the monitor. . . . . . . . . . . . . . . . . . . . . . . 4–6
Connecting the VGA (Analog) and/or DVI-D (Digital) Cable. . . . . . . . . . . . . . . . . . . . . . . . 4–6
To connect the VGA cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
To connect the DVI-D cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
Connecting the Audio Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
Connecting the USB Hub Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
Connecting USB Devices to the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
Connecting the Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8
Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–9
Adjusting the Tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10
Adjusting the Swivel (Select Models Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–11
Adjusting the Height (Select Models Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–11
Pivoting the Monitor (Select Models Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–12
Keyboard Parking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–13
User’s Guide
v
CD Software and Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1
Downloading from the World Wide Web. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1
Using the Auto-Adjustment Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
My Display OSD Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
Front-Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3
Using the Onscreen Display (OSD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3
OSD Menu Selections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4
Selecting the Video Input Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
Identifying Monitor Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
Adjusting Screen Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
Optimizing Analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
High-Bandwidth Digital Content Protection (HDCP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–8
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–1
HP LCD Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–1
Preset Video Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–3
LCD Monitor Quality and Pixel Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–6
Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–6
Declaration of Conformity for Products Marked with FCC Logo, United States Only . . . . . . . . . . C–1
Avis Canadien. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2
European Union Regulatory Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3
Japanese Material Content Declaration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3
EPA Energy Star Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3
vi
User’s Guide
1
Product Features
HP LCD Monitors
The HP LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) screen. This guide
discusses the following models:
❏ vp15 LCD Monitor
❏ vp17 LCD Monitor
❏ vp19 LCD Monitor
❏ FP1707 LCD Monitor
❏ WF1907 LCD Monitor
❏ w1907 LCD Monitor
❏ w2007 LCD Monitor
❏ w2207 LCD Monitor
Features
■ Large, diagonal viewable-area display
■ Optimum resolution, plus full-screen support for lower resolutions:
❏ vp15: 1024 × 768 @ 60 Hz
❏ vp17, vp19, and FP1707: 1280 × 1024 @ 60 Hz
❏ WF1907 and w1907: 1440 × 900 @ 60 Hz
❏ w2007 and w2207: 1680 x 1050 @ 60 Hz
■ Video inputs supported:
❏ VGA analog signal
❏ DVI digital signal (select models only)
■ Fast response time, providing better experience for gaming and graphics
■ Easy viewing from a sitting or standing position, or while moving from one side of the monitor to the other
■ Tilt adjustment
■ Height adjustment (select models only)
■ Pivot adjustment, for landscape or portrait viewing (select models only)
■ Removable pedestal and Video Electronics Standards Association (VESA) standard mounting holes for flexible
mounting solutions, including wall-mounting
■ Security lock slot for a Kensington lock security cable (security cable sold separately)
■ Plug and Play capability, if supported by your computer system
■ On-screen display (OSD) adjustments for ease of setup and screen optimization (choose English, Simplified
Chinese, French, German, Italian, Spanish, Dutch, or Japanese)
■ Swiveling monitor, allowing a usable range of motion (select models only)
■ Built-in stereo speakers, front- or rear-facing depending on model
■ Two Universal Serial Bus (USB) 2.0 ports to use with two USB devices (select models only)
■ Keyboard parking (select models only)
User’s Guide
1–1
Product Features
■ Power Saver to reduce energy consumption
■ Quick View settings display
■ CD includes (select models only):
❏ Drivers (select models only)
❏ Auto-adjustment software
❏ My Display software (select models only)
❏ Documents
®
®
❏ Adobe Acrobat Reader
■ Varied monitor base designs
Cantilever base
Double-hinged base
Column base
1–2
User’s Guide
2
Safety and Maintenance Guidelines
Important Safety Information
The power cord is designed for use with your monitor. To use a different cord, use only a power source and
connection compatible with this monitor.
WARNING: To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding
Å
Å
feature. The grounding plug is an important safety feature. Connect the equipment to a grounded (earthed) power outlet.
WARNING: For your safety, be sure that the grounded power outlet you plug the power cord into is easily accessible to the
operator and located as close to the equipment as possible. To disconnect power from the equipment, unplug the power cord
from the power outlet by grasping the plug firmly. Never pull on the cord.
CAUTION: To protect your monitor, as well as your computer, connect all power cords for your computer and its peripheral
devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip with surge protection or
uninterruptible power supply (UPS).
Ä
Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip
whose manufacturer offers a damage replacement policy, so you can replace your equipment if surge protection fails.
Safety Precautions
■ Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of
the monitor.
■ Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the
electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the
rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device.
■ Install your monitor near a power outlet that you can easily reach. Disconnect the monitor by grasping the plug
firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
■ Do not allow anything to rest on the power cord. Do not walk on the cord.
Maintenance Guidelines
To enhance the performance and extend the life of your monitor:
■ Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating
properly or has been dropped or damaged, contact your Hewlett-Packard authorized dealer, reseller, or service
provider.
■ Adjust only those controls that are described in the operating instructions.
■ Turn your monitor off when not in use. You can substantially increase the life expectancy of the monitor by using
a screen saver program and turning off the monitor when not in use.
■ Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture.
■ Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered.
Never push objects of any kind into cabinet slots or other openings.
■ Unplug the monitor from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
■ Do not drop the monitor or place it on an unstable surface.
■ When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting
scratched, defaced, or broken.
User’s Guide
2–1
Safety and Maintenance Guidelines
Cleaning the Monitor
The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor, follow
these steps:
1. Turn off the computer and the monitor.
2. Unplug your monitor from the power outlet before cleaning.
CAUTION: Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or cabinet. These
chemicals may damage the monitor. Do not use liquid or aerosol cleaners. Never use water to clean an LCD screen.
Ä
3. Wipe the screen with a dry, soft, clean cloth.
❏ If the screen requires additional cleaning, use an antistatic screen cleaner.
4. Dust the monitor housing. Use a damp cloth to clean the cabinet.
❏ If the cabinet requires additional cleaning, use a clean cloth dampened with isopropyl alcohol.
5. Plug in the monitor.
6. Turn on the monitor and the computer.
2–2
User’s Guide
3
Preparing the Monitor for Shipping
Keep the original packing box in a storage area. You may need it later if you move or ship your monitor.
You may need to detach the monitor base when you ship the HP LCD monitor.
Removing the Monitor Base
WARNING: Do not remove the base from the pedestal while the monitor is standing in the upright position. Attempting to
remove the base from the pedestal while the monitor is upright might injure the user.
Å
WARNING: Before disassembling or folding the monitor, turn off the monitor power, and disconnect all power, video, and
Å
audio cables. To disconnect power from the equipment, unplug the power cord from the power outlet by grasping the power
cord firmly. Never pull on the cord.
CAUTION: The screen is fragile. Placing the monitor screen down on a flat, soft area prevents scratches, defacing, or
breakage. Avoid applying pressure to the LCD screen; doing so can cause damage.
Ä
Removing the cantilever base
1. Disconnect the power, video, and audio cables from the monitor.
2. Set the monitor screen down on a flat, soft, protected surface.
3. Detach the base from the monitor 1,2.
Removing the cantilever base
User’s Guide
3–1
Preparing the Monitor for Shipping
4. Fold the monitor neck down, and place the monitor and base in the original packing box.
Removing the column base
1. Disconnect the power, video, and audio cables from the monitor.
2. Set the monitor screen down on a flat, soft, protected surface.
3. Pinch and hold the tabs with one hand; then pull the base off with the other hand to detach the base from the
monitor.
Removing the column base
ÅWARNING: Be careful to avoid pinching or scraping your fingers when removing the base.
4. Put the monitor and base in the original packing box.
3–2
User’s Guide
Preparing the Monitor for Shipping
Folding the Double-Hinged Monitor
You don’t have to remove this monitor base. Fold the double-hinged monitor in its original shipping position
to ship.
WARNING: Do not place the double-hinged monitor face down for folding. The base hinge can spring up and
cause serious damage to the user.
Å
1. Turn the monitor to a horizontal position with no tilt.
2. Lower the monitor all the way until the hinge is flat.
The monitor screen should still be vertical to the desktop so you can access the hinge.
3. Place the shipping strap around the base, pull it tight, and connect it by sliding the strap ends through
the slips.
User’s Guide
3–3
Preparing the Monitor for Shipping
4. Fold the monitor screen down flat, horizontal to the desktop.
5. Pivot the monitor to the portrait position.
6. Place the folded monitor, screen-side up, in its original shipping box.
3–4
User’s Guide
4
Setting Up the Monitor
Unpacking the Monitor
1. Unpack the monitor. Make sure all contents are included. Store the packing box.
2. Turn off the computer and other attached devices.
3. Determine whether the monitor will be desktop-mounted or wall-mounted. See “Installing the Monitor.”
4. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor
screen-down while preparing it for installation.
5. You need a Phillips screwdriver for preparing the monitor for wall-mounting. You may need a straight-slot
screwdriver to secure some cables.
Installing the Monitor
You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-ventilated location
near your computer.
If the monitor will be installed on a:
■ Wall, swing arm, or other mounting fixture, see “Wall-Mounting the Monitor (Mounting Fixture not Supplied).”
Connect the monitor cables after you have installed the montior.
Installing the HP LCD Monitor on a Desktop
Follow the instructions for your monitor type.
Unfolding the double-hinged monitor
WARNING: Do not place the double-hinged monitor face down when you first take it out of the box. The hinge can spring
up and cause serious damage.
Å
1. Set the monitor screen-side up on a flat surface.
User’s Guide
4–1
Setting Up the Monitor
2. Rotate the screen to the horizontal position.
3. Holding the base of the monitor, lift up the panel at its top without touching or putting pressure on the
screen 3.
4. Remove the shipping strap (do not cut it) 4.
Put the shipping strap in a safe place, in case you need it to ship the monitor.
✎
5. Lift and lower the base hinge for proper viewing.
4–2
User’s Guide
Setting Up the Monitor
Assembling the cantilever base
CAUTION: The screen is fragile. Avoid touching or applying pressure to the LCD screen; doing so can cause
damage.
Ä
1. Set the monitor screen down on a flat, soft, protected surface.
2. Align the neck with the monitor base.
3. Slide the base until it snaps in place. Make sure the base is securely locked in place.
Attaching the cantilever base
4. Lift the monitor to an upright position and place on a flat, stable surface.
Assembling the column base
1. Set the monitor base on a flat, stable surface.
2. Lift the monitor, and align the pedestal with the base.
3. Lower the monitor until the base snaps in place. Make sure the base is securely locked.
Attaching the column base
User’s Guide
4–3
Setting Up the Monitor
Wall-Mounting the Monitor (Mounting Fixture not Supplied)
Before you mount the monitor on a wall, a swing arm, or other mounting fixture, you must remove the
monitor base and the pedestal. You will need a Phillips screwdriver. Read the following warning and
caution statements before beginning the procedure.
WARNING: To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting
fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the
wall-mounting fixture and check that it is capable of supporting the monitor.
Å
Preparing the double-hinged monitor for wall-mounting
WARNING: Do not place the double-hinged monitor face down with the shipping strap intact. The hinge can
spring up and cause serious damage.
Å
1. Disconnect the power cable and any other cables from the monitor.
2. Carefully place the monitor face down on a flat, soft surface. This might entail elongating the hinge
and tilting the monitor back to ensure the monitor is flat.
3. With your fingertips, snap off the VESA cover from the back of the monitor.
4. Remove all four screws from the VESA plate.
5. Save the removed items (cover, screws, and base) for future use.
6. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.
The four-threaded mounting holes that are on the back of the panel are compliant with the VESA
standard for mounting flat-panel monitors. The15-inch monitor uses the 75 mm spacing standard,
while the other models use the 100 mm spacing standard.
Use the four holes to attach a swing arm or other mounting fixture.
4–4
User’s Guide
Setting Up the Monitor
Preparing the cantilever-base monitor for wall-mounting
1. Disconnect the power cable and any other cables from the monitor.
monitor panel screen down on a flat, soft area.
3. After the base is removed, remove the rubber plug on the neck of the monitor. You will see a screw
below the rubber plug and two additional screws on the panel.
4. Remove all three screws.
5. Remove the neck from the monitor.
6. Save the removed items (rubber plug, screws, neck, and base) for future use.
7. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached.
The four-threaded mounting holes that are on the back of the panel are compliant with the VESA
standard for mounting flat-panel monitors. The vp15 monitor uses the 75 mm spacing standard, while
the other models use the 100 mm spacing standard.
Use the four holes to attach a swing arm or other mounting fixture.
Preparing the column-base monitor for wall-mounting
1. Disconnect the power cable and any other cables from the monitor.
2. With the monitor screen face-down on a flat, soft surface, remove the monitor base. Refer to “Removing
the Monitor Base” in the previous chapter.
3. Remove the hinge cover and set it aside. Three screws and the hinge are exposed.
4. Holding the pedestal so that it cannot fall, remove the single screw that is close to the hinge, and then
remove the other two screws. If necessary, move the pedestal, so that all three screws are accessible.
5. Slide the pedestal off the monitor panel.
6. Save the removed items (screws, hinge cover, pedestal, and base) for future use.
User’s Guide
4–5
Setting Up the Monitor
7. Follow the instructions that are included with the mounting fixture to ensure that the monitor is safely attached.
The four-threaded mounting holes that are on the back of the panel are compliant with the VESA standard for
mounting flat-panel monitors. The vp15 monitor uses the 75 mm spacing standard, while the other models use the
100 mm spacing standard.
Use the four holes to attach a swing arm or other mounting fixture.
To reinstall the desktop pedestal and base for the monitor
1. Remove the mounting fixture.
2. Reverse the preceding instructions.
Connecting the VGA (Analog) and/or DVI-D (Digital) Cable
Use a VGA cable or a DVI-D cable (provided with select models). To use DVI, you must have a DVI-compliant
graphics card. Connectors are located at the back of the monitor. Be sure the computer and monitor are turned off
and unplugged.
VGA
DVI
VGA
DVI
Connecting the VGA or DVI-D cable—connector locations may vary
To connect the VGA cable
Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA video connector
on the computer.
To connect the DVI-D cable
Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI video connector on
the computer. Your computer must have a DVI-compatible graphics card installed for use with this cable. Monitor
DVI-D connector and cable are included on select models only.
4–6
User’s Guide
Setting Up the Monitor
Connecting the Audio Cable
Connect the built-in monitor speakers to the computer by using the audio cable, as shown in the following
illustration.
Audio In
Connecting the audio cables—connector locations may vary
Connecting the USB Hub Cable
Connect the USB hub cable from the computer to the USB In connector on the monitor. This enables the two
USB 2.0 ports on the side of the monitor.
USB In
Connecting USB Devices to the Monitor
You can connect two USB devices, such as a USB flash drive or a digital camcorder, to your monitor. You
can do this only after you have connected the USB hub cable from the computer to the monitor.
User’s Guide
4–7
Setting Up the Monitor
Connecting the Power Cable
1. Read the warning below.
Å■WARNING: To reduce the risk of electric shock or damage to your equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the
power cord into a grounded (earthed) electrical outlet.
■
Be sure that the grounded power outlet you plug the power cord is easily accessible to the operator and
located as close to the equipment as possible. A power cord should be routed so that it is not likely to be
walked on or pinched by items that are placed upon it or against it.
■
Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or
trip over them. Do not pull on a cord or cable.
Connecting the power cable
2. Connect one end of the power cable to the monitor and the other end to a grounded electrical outlet.
4–8
User’s Guide
Setting Up the Monitor
Adjusting the Tilt
For optimal viewing, adjust the screen tilt to your own preference, as follows:
1. Face the front of the monitor and hold the base so that you do not topple the monitor while changing
the tilt.
2. Adjust the tilt by moving the top edge of the monitor either toward or away from you, without touching the
screen.
ÄCAUTION: The double-hinged monitor can fall back if the hinge is extended fully and the monitor screen is tilted back too far.
4–10
User’s Guide
Setting Up the Monitor
Adjusting the Swivel (Select Models Only)
The HP LCD monitor allows a usable range of motion with the swivel feature.
CAUTION: To avoid breakage or other damage, avoid applying pressure to the LCD screen while swiveling it or changing
the tilt.
Ä
Adjusting the Height (Select Models Only)
The double-hinged monitor adjusts up and down easily by extending or lowering the hinge.
User’s Guide
4–11
Setting Up the Monitor
Pivoting the Monitor (Select Models Only)
CAUTION: The double-hinged monitor can scratch the base surface if the monitor is not tilted back enough before changing
the monitor from landscape to portrait position, or from portrait to landscape position.
Ä
1. Tilt the monitor backward 10 to 30 degrees.
2. If the monitor is in its landscape position, pivot the monitor clockwise to portrait position.
3. If the monitor is in its portrait position, pivot it counterclockwise to landscape position.
4–12
User’s Guide
Setting Up the Monitor
4–14
User’s Guide
5
Operating the Monitor
CD Software and Utilities
The CD that is included with this monitor contains the drivers and software that you can install on your
computer.
Installing Drivers
If you determine that you need to update the drivers, you can install the monitor-driver INF and ICM files from
the CD (select models only), or download them from the Internet.
To install the monitor-driver software from the CD:
1. Insert the CD in your computer CD drive. The CD menu appears.
2. Select the language.
3. Click Install Monitor Driver Software.
4. Follow the onscreen instructions.
5. Restart the computer.
6. Ensure that the proper resolutions and refresh rates appear in the Display Control Panel settings. Refer to
the Windows operating system documentation for more information.
You might need to install the digitally signed monitor drivers (INF or ICM files) manually from the CD, in case of an
installation error. Refer to the “Driver Software Readme” file on the CD for instructions (in English only).
✎
Downloading from the World Wide Web
To download the latest version of drivers and software files from the HP Support Web site:
2. Select your country/region.
3. Select Download Drivers and Software.
4. Enter the model number of your monitor. The software-download pages for your monitor are displayed.
5. Download and install the driver and software files by using the instructions in the download pages.
6. Ensure that your system meets the requirements.
User’s Guide
5–1
Operating the Monitor
Using the Auto-Adjustment Function
You can easily optimize the screen performance for the VGA input by using the Auto/Select button on the
monitor and the auto-adjustment pattern software on the CD provided.
Do not use this procedure if your monitor is using a DVI input (select models only). If your monitor is using
the VGA input, this procedure can correct the following image-quality conditions:
■ Fuzzy or unclear focus
■ Ghosting, streaking, or shadowing effects
■ Faint vertical bars
■ Thin, horizontal scrolling lines
■ Off-center picture
ÄCAUTION: Image retention may occur on monitors that display the same static image on screen for a prolonged
period of time. To avoid image retention on your monitor screen, you should always use a screen saver
application or turn off the monitor when it is not in use for a prolonged period of time.
To use the auto-adjustment feature:
1. Allow the monitor to warm up for 20 minutes before adjusting.
2. Press the Auto/Select button on the monitor front panel.
❏ You can also press the Menu button, and then select Image Control, followed by
❏ If the result is not satisfactory, continue with the procedure.
3. Insert the CD in your computer CD drive. The CD menu displays.
4. Select the language.
5. Select Open Auto-Adjustment Software.
6. The setup test pattern displays.
Auto-adjustment setup test pattern
7. Press the Auto/Select button on the monitor front panel to produce a stable, centered image.
My Display OSD Software
Use My Display (available for select models only) to choose preferences for optimum viewing. You can
select settings for gaming, movies, photo editing or just working on documents and spreadsheets. My
Display also provides an easy way to adjust settings such as brightness, color, and contrast.
To install the OSD software:
1. Insert the CD in your computer CD drive. The CD menu displays.
2. Select the language.
3. Click Install My Display Software (available on select models only).
4. Follow the onscreen instructions.
5. Restart the computer.
For additional information, refer to the onscreen Help within the software.
5–2
User’s Guide
Operating the Monitor
Front-Panel Controls
Control buttons are located on the front of the panel:
Icon
Description
Power
Turns the monitor on and to standby or sleep mode.
Menu
Opens, selects, or exits the OSD menu.
Adjusts the volume level.
Opens the Quick View menu to quickly adjust settings for gaming, video, photo, and text.
Navigates backward through the OSD menu and decreases adjustment levels.
Navigates forward through the OSD menu and increases adjustment levels.
Auto-adjusts the display to the ideal setting.
–
+
Auto
Select
Enters the selected option.
Using the Onscreen Display (OSD)
You can use My Display OSD software (select models only) or the front-panel control buttons to adjust settings.
✎
1. If the monitor is not already on, press the Power button to turn on the monitor.
2. To access the OSD menu, press the Menu button. The OSD Main Menu displays.
3. To navigate through the Main or Sub-Menu menu, press the + (Plus) button on the monitor’s front panel
to scroll up, or the – (Minus) button to scroll in reverse. Then press the Auto/Select button to select the
highlighted function.
❏ The menu moves to the top if you scroll down at the bottom of the selections. The menu moves to the
bottom if you scroll up at the top of the selections.
4. To adjust the scale of a selected item, press the + or – button.
5. Select Save and Return.
❏ If you don’t want to save the setting, select Cancel from the Sub-Menu or Exit from the
Main Menu.
6. Press the Menu button to exit the OSD.
When a menu is displayed, if the buttons are untouched for 30 seconds (factory default), adjustments and settings are
saved and the menu closes.
✎
User’s Guide
5–3
Operating the Monitor
OSD Menu Selections
The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an
OSD menu item, and if the menu screen has these options, you may choose to:
■ Cancel — to return to the previous menu level.
■ Save and Return — to save all changes and return to the OSD Main Menu screen. This Save and Return option is
active only if you change a menu item.
■ Reset — to change back to the previous setting.
Main Menu
Options
Icon
Submenu Options
Description
Switch Video Input
(select models only)
Switches the video input signal source when the monitor is
connected to two active and valid video sources.
Brightness
Contrast
Adjusts the brightness level of the screen.
Adjusts the contrast level of the screen.
Adjusts the screen image.
Image Control
Auto-Adjustment
Automatically adjusts the screen image (VGA Input only).
Horizontal Position
Adjusts the horizontal position of the picture (VGA
Input only).
Vertical Position
Clock
Adjusts the vertical position of the picture (VGA Input only).
Minimizes any vertical bars or strips visible on the screen
background. Adjusting the Clock will also change the
horizontal screen image (VGA Input only).
Clock Phase
Adjusts the focus of the display. This adjustment allows you to
remove any horizontal noise, and clear or sharpen the image
of characters (VGA Input only).
Custom Scaling
(select models only)
Selects the method on how displayed information on the
monitor will be formatted. Select:
Fill to Screen — Image fills the entire screen and might look
distorted or elongated because of non-proportional scaling of
height and width.
Fill to Aspect Ratio — Image is sized to fit the screen and
maintains proportional image.
Color
Selects the screen color. The factory default is 6500 K or
Custom Color, depending on the model.
9300 K
Changes to slightly blueish white.
Changes to slightly reddish white.
6500 K
Custom Color
Selects and adjusts your own color scales:
R — Sets your own red color levels.
G — Sets your own green color levels.
B — Sets your own blue color levels.
sRGB
Sets your screen colors to adapt to the color standards used
in the image technology industry.
5–4
User’s Guide
Operating the Monitor
Main Menu
Options
Icon
Submenu Options
Description (Continued)
Selects viewing mode.
Selects the movie mode.
Selects the photo mode.
Selects the gaming mode.
Selects the text mode.
Quick View
Movie
Photo
Gaming
Text
Custom
Settings saved when user adjusts the Brightness, Contrast, or
Color in one of the Quick View options.
Language
Selects the language in which the OSD menu is displayed.
The factory default is English.
Management
Selects the power-management features of the monitor.
Volume
Adjusts the volume level.
OSD Control
Adjusts the position of the OSD menu on the screen.
Horizontal OSD Position — Changes the viewing
position of the OSD menu to the left or right area of
the screen. The factory default range is 50.
Vertical OSD Position — Changes the viewing
position of the OSD menu to the top or bottom area of
the screen. The factory default range is 50.
OSD Transparency — Adjust to view the background
information through the OSD.
OSD Timeout — Sets the time in seconds that the
OSD is visible after the last button is pressed. The
factory default is 30 seconds.
Power Saver
Enables the power saving feature. Select:
On
Off
The factory default is On.
Mode Display
Displays the resolution, refresh rate, and frequency
information on the screen each time the OSD Main Menu is
accessed. Select:
On
Off
The factory default is On or Off, depending on the model.
Power-On Status Display Displays the operating status of the monitor each time the
monitor is powered on. Select the location to which to
display the status:
Top
Middle
Bottom
Off
The factory default is Top or Off, depending on the model.
User’s Guide
5–5
Operating the Monitor
Main Menu
Options
Icon
Submenu Options
Description (Continued)
DDC/CI Support
Allows the computer to control some OSD menu features such
as brightness, contrast, and color temperature. Set to:
On
Off
The factory default is On.
Bezel Power LED
(select models only)
Turns the light (LED) in the power button On and Off. When
set to Off, the light will remain off at all times.
Sleep Timer
Provides the timer-adjustment menu options:
Set Current Time — Sets the current time in hours and
minutes.
Set Sleep Time — Sets the time you want to place the monitor
in sleep mode.
Set on Time — Sets the time you want the monitor to wake up
from sleep mode.
Timer — Sets the Sleep Timer feature On or Off; the default
setting is Off.
Sleep Now — Immediately sets the monitor to enter
sleep mode.
Default Video Input
Selects the default video input signal when the monitor is
connected to two active and valid video sources. The default
is DVI. You must restart the computer to have the change take
effect.
Information
Selects and displays important information about the monitor.
Provides the current input video mode.
Current Settings
Recommended Settings
Provides the recommended resolution mode and refresh rate
for the monitor.
Serial Number
Reports the serial number of the monitor. The serial number is
needed if contacting HP technical support.
Version
Reports the firmware version of the monitor.
Reports the total hours of backlight operation.
Backlight Hours
Service Support
For service support, go to:
Factory Reset
Returns settings to factory defaults.
5–6
User’s Guide
Operating the Monitor
Selecting the Video Input Connectors
The two input connectors are:
■ VGA connector (analog)
■ DVI-D connector (digital) for select models
The monitor automatically determines which inputs have valid video signals, and displays the image.
You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, the default input selection is
DVI. The source of input can be switched using the Switch Video Input option in the OSD menu.
Identifying Monitor Conditions
Special messages appear on the monitor screen for the following monitor conditions:
■ Input Signal Out of Range — Indicates the monitor does not support the video input signal because the
resolution or refresh rate are set higher than the monitor supports.
Set the resolution and refresh rate to the value displayed. Restart your computer for the new settings to take effect.
■ Monitor Going to Sleep — Indicates the screen display is entering a sleep mode. The speakers are turned off
in sleep mode.
■ Check Video Cable — Indicates a video input cable is not properly connected to the computer or monitor.
■ OSD Lock-out — The OSD can be enabled or disabled by pressing and holding the Menu button on the front
panel for 10 seconds. If the OSD is locked, the warning message “OSD Lock-out” appears for 10 seconds.
❏ If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.
❏ If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.
■ No Input Signal — Indicates the monitor is not receiving a video signal from the computer on the monitor
video input connector(s). Check to see if the computer or input signal source is off or in the power-saver mode.
■ Auto Adjustment in Progress — Indicates the auto-adjustment function is active. See “Adjusting Screen
Quality” in this chapter.
Adjusting Screen Quality
The auto-adjustment feature automatically fine-tunes the image quality for display size, position, clock, and phase
each time a new video mode is displayed. For more precise adjustments of VGA input, run the Auto-Adjustment
If you want additional image-quality improvement, use the Clock and Clock Phase controls of the monitor to fine-tune
Optimizing Analog Video
This monitor contains advanced circuitry that allows the monitor to function as a standard analog monitor. Two
controls in the OSD menu can be adjusted to improve analog image performance:
■ Clock — Increase or decrease the value to minimize any vertical bars or stripes visible on the screen
background.
■ Clock Phase — Increase or decrease the value to minimize video distortion or video jitter.
Use these controls only when the auto-adjustment function does not provide a satisfactory monitor image in
analog mode.
To obtain the best results:
1. Allow the monitor to warm up for 20 minutes before adjusting.
2. Display the adjustment-pattern application provided on the CD.
3. Access the OSD menu, then select Image Control.
4. Set the main Clock settings correctly first, because the Clock Phase settings depend on the main Clock setting.
❏ When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue
adjusting the values until the distortion disappears.
To restore the factory settings, access the OSD menu, select Factory Reset, and then select Yes.
User’s Guide
5–7
Operating the Monitor
Power-Saver Feature
When the monitor is in normal operating mode, the Power light is blue and the monitor uses the normal watts of
The monitor also supports a power-saver mode that is controlled by the computer. When the monitor is in the
reduced-power state, the monitor screen is blank, the backlight is off, and the Power light is amber. The monitor uses
minimum power. When the monitor is “awakened,” a brief warm-up period occurs before the monitor returns to
normal operating mode. The energy-saving reduced power state activates if the monitor does not detect either the
horizontal sync signal or the vertical sync signal. The power-saver feature must be activated on your computer for this
feature to work.
Refer to your computer documentation for instructions on setting energy-saver features (sometimes called
power-management features).
The energy-saver feature works only when the monitor is connected to computers that have energy-saver features.
✎
High-Bandwidth Digital Content Protection (HDCP)
If your monitor supports HDCP, it can receive high-definition content. High-definition content is available in many
sources, such as HD-DVD and Blu-Ray devices or HDTV air or cable broadcasts. If you do not have an HDCP-enabled
monitor, you may see a black screen or a lower resolution picture when playing high-definition protected content.
Your computer graphic card and monitor must both support HDCP to display protected content.
5–8
User’s Guide
A
Troubleshooting
Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and the recommended solutions:
Problem
Solution
Power LED is not on.
Make sure the Power button is on, and the power cord is properly connected to a grounded
power outlet and to the monitor.
Check if Bezel Power LED option in the OSD menu is set to Off and, if so, set to On mode.
Screen is blank.
Connect the power cord. Turn on the power.
Press a key on the keyboard or move the mouse to turn off the screen-blanking utility.
Screen is black or displaying Check if your monitor and computer support HDCP.
at a lower resolution while
displaying high-definition
(HD) content.
Refer to “High-bandwidth Digital Content Protection (HDCP)” or
Image appears blurred,
indistinct, or too dark.
Press the Auto/Select button on the monitor front panel. If this does not correct the image, press
the Menu button to open the OSD menu, and adjust the brightness and contrast scales as
needed.
Image is not centered.
Press the Menu button to access the OSD menu. Select Image Control, and then select
Horizontal Position or Vertical Position to adjust the horizontal or vertical position of the
image.
“Check Video Cable”
appears on screen.
Connect the monitor VGA signal cable to the VGA connector on the computer, or connect the
DVI-D signal cable to the DVI connector on the computer. Be sure that the computer power is off
while connecting the video cable.
“Input Signal Out of Range”
appears on screen.
Restart your computer and enter Safe Mode. Change your settings to a supported setting (see
settings take effect.
Picture is fuzzy and has
ghosting, shadowing
problem.
Adjust the contrast and brightness controls.
Make sure that you are not using an extension cable or switch box. We recommend plugging
the monitor directly into the graphic card output connector on the back of your computer.
For VGA input, the auto-adjustment feature might fix this problem.
Unable to set the monitor to
the optimal resolution.
Make sure that the graphics card supports the optimal resolution.
Make sure that the latest supported driver is installed for the graphics card. For HP and
Compaq systems, you can download the latest graphics driver for your system from:
For other systems, refer to the Web site for your graphics card.
User’s Guide
A–1
Troubleshooting
Problem
Solution (Continued)
No Plug and Play.
In order for the Plug and Play feature of the monitor to work, you need a computer and graphic
card that are compatible with Plug and Play. Check with your computer manufacturer.
Check the monitor’s video cable, and make sure that none of the pins are bent.
Picture bounces, flickers, or
wave pattern is present in
the picture.
Move electrical devices that may cause electrical interference as far away from the monitor as
possible.
Use the maximum refresh rate that your monitor is capable of at the resolution that you are
using.
Monitor is always in “Sleep
Mode (Amber LED).”
The computer power switch should be in the On position.
The computer graphic card should be snugly seated in its slot.
Check that the monitor video cable is properly connected to the computer.
Inspect the monitor video cable, and make sure that none of the pins are bent.
Check that your computer is operational: Press the Caps Lock key and observe the Caps Lock
LED found on most keyboards. The LED should either turn on or off after hitting the Caps
Lock key.
USB 2.0 ports are not
working.
Make sure the USB hub cable is securely connected to the monitor and the computer.
Using the World Wide Web
Select your country/region, and then follow the links to the support page for your monitor.
Preparing to Call Technical Support
If you cannot solve a problem by using the troubleshooting tips in this section, you might have to call technical
support. For technical support contact information, refer to the printed documentation included with the monitor. Have
the following information available when you call:
■ Monitor model number (located on label on back of monitor)
■ Monitor serial number (located on label on back of monitor or in the OSD display in the Information menu)
■ Purchase date on invoice
■ Conditions under which the problem occurred
■ Error messages received
■ Hardware configuration
■ Name and version of hardware and software you are using
Locating the Rating Label
The rating label on the monitor provides the product number and serial number. You may need these numbers when
contacting HP about your monitor model.
The rating label is on the back of the monitor.
A–2
User’s Guide
B
Technical Specifications
All specifications represent the typical specifications provided by HP’s component manufacturers; actual
performance may vary either higher or lower.
HP LCD Monitors
Specifications
Display Type
TFT LCD Active Matrix
Screen Size
vp15:
vp17:
15.0 in.
17.0 in.
19.0 in.
17.0 in.
19.0 in.
19.0 in.
20.0 in.
22.0 in.
38.1 cm
43.2 cm
48.3 cm
43.2 cm
48.3 cm
48.3 cm
50.8 cm
55.9 cm
vp19:
FP1707:
WF1907:
w1907:
w2007:
w2207:
Viewable Image Size
vp15:
vp17:
15.0 in. diagonal
17.0 in. diagonal
19.0 in. diagonal
17.0 in. diagonal
19.0 in. diagonal
19.0 in. diagonal
20.0 in. diagonal
22.0 in. diagonal
38.1 cm
43.2 cm
48.3 cm
43.2 cm
48.3 cm
48.3 cm
50.8 cm
55.9 cm
vp19:
FP1707:
WF1907:
w1907:
w2007:
w2207:
o
o
Tilt
–5 to +25
Antiglare polarizer with hard coating (select models only)
Face Treatment
Maximum Weight (unpacked)
vp15:
vp17:
vp19:
FP1707:
WF1907:
w1907:
w2007:
w2207:
6.8 lb
3.1 kg
5.3 kg
5.7 kg
4.6 kg
4.9 kg
5.0 kg
6.0 kg
9.0 kg
11.7 lb
12.6 lb
10.1 lb
10.8 lb
11.0 lb
13.3 lb
19.8 lb
User’s Guide
B–1
Technical Specifications
Specifications (Continued)
Dimensions (including base)
vp15:
vp17:
vp19:
FP1707:
WF1907:
w1907:
w2007:
w2207 (high position):
w2207 (low position):
Height x Width x Depth
13.9 x 15.9 x 7.68 in.
15.67 x 17.32 x 7.25 in.
16.81 x 19.06 x 7.25 in.
15.41 x 17.36 x 8.15 in.
12.28 x 20.12 x 2.64 in.
14.96 x 17.87 x 7.28 in.
15.63 x 19.29 x 7.25 in.
18.9 x 20.6 x 11.4 in.
14.6 x 20.6 x 11.4 in.
Height x Width x Depth
354 x 405 x 195 mm
398 x 440 x 184 mm
427 x 484 x 184 mm
392 x 441 x 207 mm
312 x 511 x 67 mm
380 x 454 x 185 mm
396.9 x 490 x 184.2 mm
481.3 x 523.5 x 289 mm
371.2 x 523.5 x 289 mm
Maximum Graphics Resolution
vp15:
vp17, vp19, FP1707:
WF1907, w1907:
w2007, w2207:
1280 × 768 @ 75 Hz analog mode
1280 × 1024 @ 75 Hz analog mode
1440 × 900 @ 60 Hz analog mode
1680 x 1050 @ 60 Hz analog mode
Optimum Graphics Resolution
vp15:
vp17, vp19, FP1707:
WF1907, w1907:
w2007, w2207:
1024 × 768 @ 75 Hz analog mode
1280 × 1024 @ 75 Hz analog mode
1440 × 900 @ 60 Hz analog mode
1680 x 1050 @ 60 Hz analog mode
Text Mode
720 x 400
Dot Pitch
vp15:
0.297 x 0.297 mm
0.264 x 0.264 mm
0.294 x 0.294 mm
0.283 x 0.284 mm
0.282 x 0.282 mm
vp17, FP1707:
vp19, WF1907:
w1907:
w2007, w2207:
Horizontal Frequency
(analog mode)
vp15:
24 to 63 kHz
vp17, vp19, FP1707,
WF1907, w1907:
w2007, w2207:
24 to 83 kHz
24 to 82 kHz
Vertical Refresh Rate
(analog mode)
vp15, vp17, vp19, FP1707
WF1907, w1907, w2007:
w2207:
50 to 76 Hz
48 to 76 Hz
Environmental Requirements
Temperature (independent of
altitude):
Operating Temperature
Non-operating Temperature
o
o
o
o
41 to 95 F
5 to 35 C
o
o
o
o
–29 to 140 F
–20 to 60 C
Relative Humidity
Power Source
20% to 80%
100–240V , 50/60 Hz
B–2
User’s Guide
Technical Specifications
Specifications (Continued)
Power Consumption
vp15:
vp17:
31 watts maximum
45 watts maximum
47 watts maximum
45 watts maximum
49 watts maximum
49 watts maximum
52 watts maximum
65 watts maximum
vp19:
FP1707:
WF1907:
w1907:
w2007:
w2207:
Sleep Power Consumption
Input Terminals
<2 watts typical
VGA 15-pin D-type connector
DVI-D 24-pin D-type connector
(select models only)
Preset Video Modes
This monitor automatically recognizes many preset video input modes that will appear properly sized and centered
on the screen. The following modes are assigned at the factory and are the most commonly used display resolutions:
■ vp15 supports preset modes 1 through 11
■ vp17, vp19, and FP1707 supports preset modes 1 through 15
Factory Preset Video Input Modes, vp15, vp17, vp19, FP1707
Horizontal
Pixel Format Frequency (kHz)
Vertical
Frequency (Hz)
Preset
1
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
31.4
37.8
37.5
31.4
37.8
48.0
46.8
49.7
48.3
56.4
60.0
68.6
71.7
63.9
79.9
59.9
72.8
75.0
70.0
60.3
72.1
75.0
74.5
60.0
70.0
75.0
75.0
76.1
60.2
75.0
2
3
4
5
6
7
8
9
10
11
12
13
14
15
User’s Guide
B–3
Technical Specifications
■ WF1907 and w1907 supports preset modes 1 through 16
Factory Preset Video Input Modes, WF1907, w1907
Horizontal
Pixel Format Frequency (kHz)
Vertical
Frequency (Hz)
Preset
1
640 x 480
640 x 480
31.5
37.5
31.5
37.9
46.9
49.7
48.4
60.0
44.9
68.7
61.8
47.4
60.0
63.9
79.9
55.9
59.9
2
3
75.0
720 x 400
70.0
4
800 x 600
60.3
5
800 x 600
75.0
6
832 x 624
74.5
7
1024 x 768
1024 x 768
1152 x 720
1152 x 870
1152 x 900
1280 x 768
1280 x 960
1280 x 1024
1280 x 1024
1440 x 900
60.0
8
75.0
9
60.0
10
11
12
13
14
15
16
75.1
65.9
60.0
60.0
60.0
75.0
59.9
■ w2007 supports preset modes 1 through 18
Factory Preset Video Input Modes, w2007
Horizontal
Vertical
Frequency (Hz)
Preset
Pixel Format Frequency (kHz)
1
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1152 x 720
1152 x 870
1152 x 900
1280 x 768
1280 x 960
1280 x 1024
31.4
37.5
31.5
37.9
46.8
49.7
48.3
60.0
68.6
44.8
68.7
61.8
47.4
60.0
63.9
59.9
75.0
70.0
60.3
75.0
74.5
60.0
75.0
85.0
60.0
75.0
65.9
76.1
60.0
60.0
2
3
4
5
6
7
8
9
10
11
12
13
14
15
B–4
User’s Guide
Technical Specifications
Factory Preset Video Input Modes, w2007 (Continued)
Horizontal
Vertical
Preset
16
Pixel Format Frequency (kHz)
Frequency (Hz)
1280 x 1024
1440 x 900
1680 x 1050
79.9
59.9
65.2
75.0
59.9
60.0
17
18
■ w2207 supports preset modes 1 through 18
Factory Preset Video Input Modes, w2207
Horizontal
Vertical
Frequency (Hz)
Preset
Pixel Format Frequency (kHz)
1
640 x 480
640 x 480
31.4
37.5
31.5
37.9
46.9
49.7
48.4
60.0
44.8
68.7
61.8
47.4
60.0
63.9
79.9
55.9
61.6
65.3
59.9
75.0
70.0
60.3
75.0
74.5
60.0
75.0
60.0
75.1
65.9
60.0
60.0
60.0
75.0
59.9
60.0
60.0
2
3
720 x 400
4
800 x 600
5
800 x 600
6
832 x 624
7
1024 x 768
1024 x 768
1152 x 720
1152 x 870
1152 x 900
1280 x 768
1280 x 960
1280 x 1024
1280 x 1024
1440 x 900
1600 x 1000
1680 x 1050
8
9
10
11
12
13
14
15
16
17
18
User’s Guide
B–5
Technical Specifications
LCD Monitor Quality and Pixel Policy
The HP LCD Monitor uses high-precision technology, manufactured according to high standards, to help guarantee
trouble-free performance. Nevertheless, the display may have cosmetic imperfections that appear as small bright or
dark spots. This is common to all LCD displays used in products supplied by all vendors and is not specific to the
HP LCD Monitor. These imperfections are caused by one or more defective pixels or subpixels.
■ A pixel consists of one red, one green, and one blue subpixel.
■ A defective whole pixel is always turned on (a bright spot on a dark background), or it is always off (a dark spot
on a bright background). The first is the more visible of the two.
■ A defective subpixel (dot defect) is less visible than a defective whole pixel, and is small and only visible on a
specific background.
To locate defective pixels, the monitor should be viewed under normal operating conditions and in normal operating
mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (16 inches).
We expect that, over time, the industry will continue to improve its ability to produce displays with fewer cosmetic
imperfections, and we will adjust guidelines as improvements are made.
For more information about your HP LCD Monitor, refer to the HP Web site at: http://www.hp.com/support
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate
on input voltages between 100–240Vv, 50/60 Hz, 1.5A.
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the
country/region where you purchased the equipment.
If you need to obtain a power cord for a different country/region, you should purchase a power cord that is
approved for use in that country/region.
The power cord must be rated for the product and for the voltage and current marked on the product’s electrical
ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked
²
on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm or 18AWG, and the
length of the cord must be between 4.94 ft. (1.5 m) and 12 ft. (3.6 m). If you have questions about the type of power
cord to use, contact your HP-authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against
it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the
product.
B–6
User’s Guide
C
Agency Regulatory Notices
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and the receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■ Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by Hewlett-Packard Company may void the user’s authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain
compliance with FCC rules and regulations.
Declaration of Conformity for Products Marked with FCC Logo,
United States Only
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
For questions regarding your product, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or
Call: 1-800-474-6836
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or
Call: 1-281-514-3333
To identify this product, refer to the part, series, or model number found on the product.
User’s Guide
C–1
Agency Regulatory Notices
Materials Disposal
This HP product contains mercury in the fluorescent lamp in the display LCD that might require special handling at
end-of-life:
Disposal of this material can be regulated because of environmental considerations. For disposal or recycling
information, contact your local authorities or the Electronic Industries Alliance (EIA) (http://www.eiae.org).
Canadian Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
European Union Regulatory Notice
This product complies with the following EU Directives:
■ Low Voltage Directive 73/23/EEC
■ EMC Directive 89/336/EEC
Compliance with these directives implies conformity to applicable harmonized European standards (European
Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product
family.
This compliance is indicated by the following conformity marking placed on the product:
XXXX*
This marking is valid for
non-Telecom products and
EU harmonized Telecom
products (e.g. Bluetooth).
This marking is valid for EU
non-harmonized Telecom
products.
*Notified body number (used
only if applicable — refer to the
product label).
Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
Disposal of Waste Equipment by Users in Private Households in
the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of
with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information about where you can drop
off your waste equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
C–2
User’s Guide
Agency Regulatory Notices
Japanese Notice
Japanese Power Cord Notice
Japanese Material Content Declaration
A Japanese regulatory requirement, defined by Specification JIS C 0950, 2005, mandates that manufacturers
provide Material Content Declarations for certain categories of electronic products offered for sale after July 1,
Korean Notice
EPA Energy Star Compliance
®
Products marked with the ENERGY STAR logo on the packaging box qualify with the U.S.
®
Environmental Protection Agency’s ENERGY STAR guidelines for energy efficiency.
®
Products with the ENERGY STAR label are designed to use less energy, help you save money on
utility bills, and help protect the environment.
®
ENERGY STAR is a registered trademark owned by the U.S. government.
User’s Guide
C–3
Agency Regulatory Notices
HP Recycling Program
HP offers product end-of-life return programs for HP and other manufacturers’ hardware in several geographic areas.
The terms and availability of these programs vary by geography because of differences in regulatory requirements
and local customer demand. For information on the HP recycling program, refer to the HP Web site at:
The Table of Toxic and Hazardous Substances/Elements and their Content
as required by China’s
Management Methods for Controlling Pollution by Electronic Information Products
Toxic and Hazardous Substances and Elements
Part Name
Lead Mercury
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers
(PBDE)
(Pb)
(Hg)
Liquid Crystal Display
Panel
X
X
O
O
O
O
Chassis/Other
X
O
O
O
O
O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below
the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this
part is above the limit requirement in SJ/T11363-2006.
All parts named in this table with an “X” are in compliance with the European Union’s RoHS Legislation – “Directive
2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment”.
Note: The referenced Environmental Protection Use Period Marking was determined according to normal operating use
conditions of the product such as temperature and humidity.
“˅ꢀƅɦƅǧĭᯬz̯Ոȑ
ࢴ ǎȯₓꢁ ˾Ϣɋ6εϹʖͮǯ“˨˵˄$ġɼǂ¢Ǣζ
ƅɦƅǧĭᯬz̯
ᾬâȑ
ࢴ ꢀ
̶Šxᆳ⁞
ꢀ
⎉ꢁ(Pb)
Ɩ
␍ꢁ(Cd)
˜ˊ⎰ꢁ ŹŠ༘˦
ꢁ
(PBDE)
(Hg)
(Cr(VI))
(PBB)
O
X
X
X
O
O
O
O
O
O
^òº
߾ ʃ O
O
ƶੵ/͢Âꢁ
Oꢁᜬ
߾ ᪩ƅɦƅǧĭᯬń᪩ᾬâ¤ƅţᯬnjꢂꢃՈȯₓţńSJ/T11363-2006 ʃβᢈǎՈ└ₓᡅ˖Ñ[4ꢀ Xꢁᜬ
߾ ᪩ƅɦƅǧĭᯬႷɅń᪩ᾬâՈɌPţᯬnjꢂꢃՈȯₓ᱉ϦSJ/T11363-2006 ʃβᢈǎՈ└ₓᡅ˖4ꢀ ؛ ɋʃȽPX” ̪͛Ƚૡˉ૪ȫɯßΖ RoHS Ǣᢈ “ßȖᩲˣ˂ßΖǂʀˣ 2003 1 ȼ 27 ų͟ʃϹʖϹς᪂̣ɋꢀġ̦ɪˁʌȽˢÛᯬ͛ 2002/95/EC ɨΨʾQ
ǰዖɳ̦ͫɪɌꢀ͛ȻĘʃɊÈʃ“˨Ąi7̎͛ʟª˂ːªɄɶˉ
Part number: 440143-002
C–4
User’s Guide
|