SX 896L PX S
English
Operating Instructions
OVEN
Contents
Operating Instructions,1
Warnings,2
Description of the appliance,3
Installation,4
Electrical Connection,5
Start-up and use,6
Modes,7
Precautions and tips,11
Maintenance and care,11
Troubleshooting,14
Afetr Sales Service,15
Guarantee,16
08448 24 24 24
Please phone us on
guarantee
to activate your
Description of the appliance
GB
Overall view
9
6
1. POSITION 1
2. POSITION 2
3. POSITION 3
4. POSITION 4
5. POSITION 5
6. GUIDES for the sliding racks
7. DRIPPING PAN
8. GRILL
8
5
3
1
4
7
2
9. Control panel
Display
Control panel
20. TEMPERATURE and TIME numerical digits
21. DURATION icon
22. END OF COOKING icon
23. CLOCK icon
24. MINUTE MINDER icon
25. CONTROL PANEL LOCK indicator
26. DOOR LOCK indicator
27. Preheating / Residual heat indicator
28. MODE icons
10. SELECTOR knob
11. CONTROL PANEL POWER BUTTON
12. DISPLAY
13. THERMOSTAT / TIMER knob
14. START / STOP
15. FAST CLEAN icon
16. MINUTE MINDER icon
17. TIMER icon
18. DOOR / CONTROL PANEL LOCK icon
19. LIGHT icon
10
11
12
13
18
15
14
17
19
16
20
21 22
28
27
26 25 24 23
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
3
Ventilation
Installation
GB
To ensure adequate ventilation, the back panel of the
cabinet must be removed. It is advisable to install the oven
so that it rests on two strips of wood, or on a completely
flat surface with an opening of at least 45 x 560 mm (see
diagrams).
! Please keep this instruction booklet in a safe place for
future reference. If the appliance is sold, given away or
moved, please make sure the booklet is also passed on to
the new owners so that they may benefit from the advice
contained within it.
! Please read this instruction manual carefully: it contains
important information concerning the safe operation,
installation and maintenance of the appliance.
Positioning
! Do not let children play with the packaging material; it
should be disposed of in accordance with local separated
waste collection standards (see Precautions and tips).
Centring and fixing
Secure the appliance to the cabinet:
• Open the oven door.
• slide out the side gaskets at the top until the 2 fixing holes
are exposed;
• Fix the oven to the cabinet using the 2 wood screws.
• reposition the 2 gaskets.
!The appliance must be installed by a qualified professional
in accordance with the instructions provided. Incorrect
installation may damage property or cause harm to people
or animals.
Built-in appliances
Use an appropriate cabinet to ensure that the appliance
operates properly:
• The panels adjacent to the oven must be made of heat-
resistant material.
• Cabinets with a veneer exterior must be assembled with
glues which can withstand temperatures of up to 100°C.
• To install the oven under the counter (see diagram) or
in a kitchen unit, the cabinet must have the following
dimensions:
!All parts which ensure the safe operation of the appliance
must not be removable without the aid of a tool.
550 mm.
min.
* Stainless steel models only
! The appliance must not come into contact with electrical
parts once it has been installed.
The indications for consumption given on the data plate
have been calculated for this type of installation.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
4
Unplug the appliance before all operations, even
when replacing the oven lamp.
Electrical Connection
GB
The electrical connection to the mains must be made on
the appliance. The power voltage and frequency are as
indicated on the rating plate.
Using the appliance without correct earthing is highly
dangerous.
! After connecting the appliance to the flexible cable,
tighten all the screws on the terminal board.
! THIS APPLIANCE MUST BE EARTHED.
Fitting the power supply cable
! The cable must be checked regularly and replaced
by authorised technicians only (see Assistance).
1. Open the terminal board
by inserting a screwdriver
into the side tabs of the
cover. Use the screwdriver
as a lever by pushing it
down to open the cover (see
diagram)
APPLIANCE SPECIFICATIONS
width 43.5 cm
height 32,4 cm
depth 41.5 cm
Dimensions*
Volume*
.
59 l
2. Install the power supply
cable by loosening the
cable clamp screw and the
three wire contact screws
width 45.5 cm
height 32,4 cm
depth 41.5 cm
Dimensions**
L
L-N-
.
Volume**
62 l
Connect the wires to the
corresponding terminals:
the Blue wire to the terminal
marked (N), the Brown wire
to the terminal marked (L)
and the Yellow/Green wire
voltage: 230-240V~ 50/60Hz or 50Hz
(see data plate)
maximum power absorbed
2800-3000 W
Electrical
connections
Directive 2002/40/EC on the label
of electric ovens. Standard EN 50304
to the terminal marked
(see diagram).
N
ENERGY
LABEL
Declared energy consumption
for Forced convection Class –
heating mode:
3. Secure the cable by fastening the clamp screw.
4. Close the cover of the terminal board.
ECO.
Electrical Connection:
Voltage Frequency: see data plate
Fuse Section: 16A
Supply cable: 3x1.5mm2
You can connect your oven to the system means of a
terminal board. Refer to above information for the minimal
cable sections and the calibration of the protective elements
according to the connection.
If the appliance is installed with a junction box, an
omnipolar circuit breaker - with a minimum contact
opening of 3mm - should be installed between the appliance
and the mains.
* Only for models with drawn rails.
** Only for models with wire rails.
Power cable supply connection to the electrical mains:
We recommend you use a power supply cable which is
long enough to allow you to take the oven out of its recess
in the event of maintenance operations (only use HAR - H
05 - RRF quality cables fitted with a plug conforming to the
regulations in force.
The plug must be accessible at all times.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
5
Setting the clock
! The clock can only be set when the oven is switched off. If
Start-up and use
GB
WARNING! The oven is
the oven is in standby mode, pressing the
button once will
provided with a stop system
to extract the racks and
prevent them from coming
out of the oven (1).
As shown in the drawing,
to extract them completely,
simply lift the racks, holding
them on the front part, and
display the current time setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the
button and the digits on the TIME display
will flash for 10 seconds.
To set the clock:
1. Press the
button.
2. Turn the TIMER knob towards “ ” and “ ” to adjust the
hour value.
pull (2).
3. Once you have reached the correct hour value, press
!The first time you use your appliance, heat the empty oven
with its door closed at its maximum temperature for at least
half an hour. Make sure that the room is well ventilated
before switching the oven off and opening the oven door.
The appliance may emit a slightly unpleasant odour caused
by protective substances used during the manufacturing
process burning away.
the
button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the clock.
If the
icon flashes on the display, this indicates that the
clock has not been set correctly.
! To make the setting process easier, keep the knob in “ ”
or “ ” position: this will increase the scrolling speed of the
numbers on the display.
! Each setting will automatically be stored in the appliance
memory after 10 seconds.
Setting the minute minder
! The minute minder may be set regardless of whether the
oven is switched on or off. It does not switch the oven on or off.
When the set time has elapsed, the timer emits a buzzer
that will automatically stop after 30 seconds or when any
active button on the control panel is pressed.
! The touch controls cannot be activated if the user is
wearing gloves.
! In order to optimise the cooking performance, when
starting the selected function, product settings will be
applied that could cause a delayed start of the fan and
heating elements.
To adjust the timer proceed as follows:
1. Press button
.
2. Turn the TIMER knob towards “ ” and “ ” to adjust the
hour value.
Some models are equipped with a system of hinges which
allows the door to close slowly, without the user having to
follow the movement through with his/her hand. To use the
system correctly, before closing the door:
3. Once you have reached the desired value, press the
button again.
The lit
symbol will remind you that the minute minder
is on. The DISPLAY will show the countdown.
• Open the door fully.
• Do not force the closing movement manually.
To cancel the minute minder, press the
button and use
Control panel lock
the knob to set the time to 00:00. Press button
again.
!The control panel can be locked while the oven is off, once
cooking has started or finished and during programming.
The
icon will switch off to indicate that the minute minder
has been disabled.
To lock the oven controls, press and hold the
button for
at least 2 seconds. A buzzer sounds and the display shows
Starting the oven
the key symbol “n—O”. The
indicate lock function activation.
and
icons, when lit,
button again
1. Switch the control panel on by pressing the
The appliance buzzer sounds three times (ascending) and
all buttons light up in sequence.
2. Select the desired cooking mode by turning the
SELECTOR knob. The display shows:
- the temperature associated with the mode, if programming
manually;
button.
To deactivate the lock, press and hold the
for at least 2 seconds.
!When cleaning the appliance, the door lock may be closed
accidentally (there is an exposed spring). If this happens,
reopen it by turning the door lock upwards (see figure).
- “Auto” and the duration alternately, if programming is
automatic.
KO
OK
3. Press the
button to begin cooking.
4. The oven will begin its preheating phase, the preheating
indicators will light up as the temperature rises.
5. When the preheating process has finished, a buzzer
sounds and all the preheating indicator lights show that this
stage has been completed: the food can then be placed in
the oven.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
6
6. During cooking it is always possible to:
buzzer will sound. The first time the
oven will behave as if it is being switched on for the first time.
button is pressed, the
GB
- modify the temperature by turning the THERMOSTAT
knob (manual modes only);
Standby
- set the duration of a cooking mode (see Cooking Modes);
This product complies with the requirements of the latest
European Directive on the limitation of power consumption
of the standby mode. If no buttons are pressed for 30
minutes and the control panel/door lock has not been
activated, the appliance automatically reverts to standby
mode. The standby mode is visualised by the high luminosity
“Watch Icon”. As soon as interaction with the machine
resumes, the system’s operating mode is restored.
- press the
button to stop cooking. In this case the
appliance stores the temperature modified previously in its
memory (manual modes only);
- switch off the oven by pressing the
seconds..
button for 3
7. If a blackout occurs while the oven is already in operation,
an automatic system within the appliance will reactivate the
cooking mode from the point at which it was interrupted,
provided that the temperature has not dropped below a
certain level. Programmed cooking modes which have not
yet started will not be restored and must be reprogrammed
(for example: a cooking mode has been programmed to
start at 20:30. At 19:30 a blackout occurs. When the power
supply is restored, the mode will have to be reprogrammed).
Modes
! In order to guarantee wonderfully soft and crunchy
foodstuffs, the oven releases – in the form of water vapour -
the humidity naturally withheld in the food itself. In this way,
optimal cooking results can be achieved for all types of food.
! There is no preheating stage for the GRILL mode.
! Never put objects directly on the bottom of the oven; this
will prevent the enamel coating from being damaged.
! Always place cookware on the rack(s) provided.
! The oven will begin its preheating phase after 2 seconds
from selecting the desired cycle.
! Every time the oven is switched on, it suggests the first
manual cooking mode.
Manual cooking modes
! All cooking modes have a default cooking temperature
which may be adjusted manually to a value between 30°C
and 250°C as desired.In the GRILLmode, the default power
level value is indicated as a percentage (%) and may also
be adjusted manually. Any temperature adjustments will be
stored in the appliance memory and suggested again the
next time this mode is used. If the selected temperature is
higher than the temperature inside the oven, the text “Hot”
appears on the display. However, it will still be possible to
start cooking.
Cooling ventilation
In order to cool down the external temperature of the oven, a
cooling fan blows a stream of air between the control panel
and the oven door, as well as towards the bottom of the
oven door.In the FAST COOKING mode, the fan is activated
automatically after ten minutes. At the beginning of the
FAST CLEAN mode, the cooling fan operates at low speed.
!Once cooking has been completed, the cooling fan continues
to operate until the oven has cooled down sufficiently.
MULTILEVEL mode
Oven light
All heating elements and the fan are activated. Since the
heat remains constant throughout the oven, the air cooks
and browns food in a uniform manner. A maximum of two
racks may be used at the same time.
The light comes on when the oven door is opened or when
a cooking mode starts.
When models featuring LED INSIDE technology begin
cooking, the LEDs on the door light up for improved
illumination of all cooking levels.
The
button can be used to switch on the light at any time.
GRILL mode
The top heating element and the rotisserie spit (where
present) are activated. The high and direct temperature
of the grill is recommended for food which requires a high
surface temperature.Always cook in this mode with the oven
door closed (see “Practical cooking advice”).
Residual heat indicators
The appliance is fitted with a residual heat indicator. When
the oven is off, the “residual heat” bar on the display lights
up to indicate high temperatures inside the oven cavity. The
individual segments of the bar switch off one by one as the
temperature inside the oven falls.
FAN GRILLING mode
The top heating element and the rotisserie spit (where
present) are activated and the fan begins to operate.
During part of the cycle the circular heating element is
also activated. This combination of features increases the
effectiveness of the unidirectional thermal radiation provided
by the heating elements through the forced circulation of
the air throughout the oven.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven, then
press and hold the button corresponding to the first manual
cooking mode (top left) and the
button simultaneously
for 6 seconds. Once the restore procedure is complete, a
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
7
This helps prevent food from burning on the surface and The cooking duration can be customised according to
allows the heat to penetrate right into the food. Always personal taste by modifying the relevant value - before
cook in this mode with the oven door closed (see “Practical cooking begins - by ±5/20 minutes depending on the
GB
cooking advice”).
selected programme. The duration can however be modified
even once cooking has begun. If the value is modified
before the programme begins, it is stored in the memory
and suggested again by the appliance when the programme
is next used. If the temperature inside the oven is higher
than the suggested value for the selected mode, the text
“Hot” appears on the TEMPERATURE display and it will
not be possible to begin cooking; wait for the oven to cool.
FAST COOKING mode
This mode is particularly suitable for cooking pre-packed
food quickly (frozen or pre-cooked). The best results are
achieved using one cooking rack only.
LOW TEMPERATURE modes
! When the cooking stage has been reached, the oven
This type of cooking can be used for proving, defrosting,
preparing yoghurt, heating dishes at the required speed and
slow cooking at low temperatures. The temperature options
are: 40, 65 and 90°C.
buzzer sounds.
! Do not open the oven door as this will disrupt the cooking
time and temperature.
BAKING mode
BAKED CAKES mode
The rear heating element and the fan are switched on, thus
guaranteeing the distribution of heat in a delicate and uniform
manner throughout the entire oven.This mode is ideal for baking
temperature sensitive foods (such as cakes, which need to rise).
This function is ideal for cooking desserts which are made
using natural yeast, baking powder and desserts which
contain no yeast. Place the dish in the oven while it is still
cold. The dish may also be placed in a preheated oven.
PIZZA modes
BREAD mode
The top and circular heating elements switch on and the fan
begins to operate. This combination heats the oven rapidly.
If you use more than one rack at a time, switch the position
of the dishes halfway through the cooking process.
Use this function to bake bread. To obtain the best results, we
recommend that you carefully observe the instructions below:
• follow the recipe;
• do not exceed the maximum weight of the dripping pan;
• remember to pour 50 g (0,5 dl) of cold water into the
baking tray in position 5.
• The dough must be left to rise at room temperature for
1 – 1 ½ hours (depending on the room temperature) or
until the dough has doubled in size.
ECO mode
The rear heating element and the fan are switched on,
thus guaranteeing the distribution of heat in a delicate and
uniform manner throughout the entire oven.This energy
saving mode is recommended for small dishes, ideal for
heating foods and finishing off cooking.
Recipe for BREAD:
1 Dripping pan holding 1000 g Max, lower level
2 Dripping pans each holding 1000 g Max, medium and
lower levels
Rotisserie spit*
To operate the rotisserie
function (see diagram)
proceed as follows:
1. Place the dripping pan in
position 1.
Recipe for 1000 g of dough: 600 g flour, 360 g water, 11g
salt, 25 g fresh yeast (or 2 sachets of powder yeast)
Method:
• Mix the flour and salt in a large bowl.
• Dilute the yeast in lukewarm water (approximately 35
degrees).
• Make a small well in the mound of flour.
• Pour in the water and yeast mixture.
2. Place the rotisserie
support in position 3 and
insert the spit in the hole
provided on the back panel
of the oven.
• Knead the dough by stretching and folding it over itself
with the palm of your hand for 10 minutes until it has a
uniform consistency and is not too sticky.
• Form the dough into a ball shape, place it in a large bowl
and cover it with transparent plastic wrap to prevent the
surface of the dough from drying out. Select the manual
LOW TEMPERATURE function on the oven and set the
temperature to 40°C. Place the bowl inside and leave
the dough to rise for approximately 1 hour (the dough
should double in volume).
3. Start the rotisserie
function by selecting the
or
modes;
! When
is opened.
mode is on, the rotisserie will stop if the door
Automatic cooking modes
!The temperature and cooking duration are pre-set values,
guaranteeing a perfect result every time - automatically. These
values are set using the C.O.P.® (Programmed Optimal
Cooking) system. The cooking cycle stops automatically and
the oven indicates when the dish is cooked. You may start
cooking whether the oven has been preheated or not.
• Cut the dough into equal sized loaves.
* Only available in certain models.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
8
• Place them in the dripping pan, on a sheet of baking
paper.
• Dust the loaves with flour.
GB
Practical cooking advice
• Make incisions on the loaves.
• Place the food inside the oven while it is still cold.
! Do not place racks in position 1 and 5 during fan-assisted
cooking. This is because excessive direct heat can burn
temperature sensitive foods.
• Start the
BREAD cooking mode.
• Once baked, leave the loaves on one of the grill racks
! In the GRILL and FAN GRILLING cooking modes,
particularly when using the rotisserie spit, place the dripping
pan in position 1 to collect cooking residues (fat and/or
grease).
until they have cooled completely.
Programming cooking
! A cooking mode must be selected before programming
can take place.
MULTILEVEL
Programming the cooking duration
• Use positions 2 and 4, placing the food which requires
more heat on 2.
1. Press the
button until the
icon and the numerical
digits on the display begin to flash.
• Place the dripping pan on the bottom and the rack on
2. Turn the TIMER knob towards “ ” and “ ” to adjust the
time as desired; keep the knob in position to scroll through
the numbers more quickly and make the setting process
easier.
top.
GRILL
3. Once you have reached the desired duration, press the
• Place the rack in position 3 or 4. Position the food in the
button again. The display will show the duration and
set temperature alternately.
centre of the rack.
• We recommend that the temperature is set to its
maximum level. The top heating element is regulated by
a thermostat and may not always operate constantly.
4. Press the
button to begin cooking.
5. When cooking has finished, “END” appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and a duration of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
PIZZA
• Use a lightweight aluminium pizza pan. Place it on the
rack provided.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking end
time can be scheduled.
! For the delayed programming to work properly, the clock
should be set to the correct time.
For a crispy crust, do not use the dripping pan as this
extends the total cooking duration and prevents the crust
from forming.
• If the pizza has a lot of toppings, we recommend adding
the mozzarella cheese to the top of the pizza halfway
through the cooking process.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Press the
button twice: the
icon and the
numerical digits on the display will begin to flash.
3. Turn the TIMER knob towards “ ” and “ ” to adjust the
cooking end time value.
4. Once you have reached the desired end time, press the
button again. The display will show the duration, the
cooking end time and the set temperature alternately.
5. Press the
button to activate the programmed mode.
and buttons
Programming has been set when the
are illuminated. The DISPLAY shows the cooking end time
and the cooking duration alternately.
6. Once cooking has finished, “END” appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed, while the end time is set to
12:30. The programme will start automatically at 11:15
a.m.
To cancel programming press the
button.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
9
Cooking advice table
GB
Rack position
Recommended Cooking
Modes
Foods
Weight
(Kg)
Preheating
Temperature
(°C)
duration
(minutes)
standard
guide rails guide rails
sliding
Manual
Pizza on 2 racks
Pies on two racks/cakes on 2 racks
Sponge cake on 2 racks (on the dripping pan)
Roast chicken + potatoes
Lamb
2 and 4
2 and 4
2 and 4
1 and 2/3
2
1 or 2
2
1 and 3
1 and 3
1 and 3
1 and 3
1
1
1
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
220-230
180
170
200-210
190-200
180
190-200
190
20-25
30-35
20-25
65-75
45-50
30-35
35-40
20-25
10-20
20-25
20-30
Multilevel*
1+1
1
1
Mackerel
Lasagne
1
1 and 3 and 5 1 and 2 and 4
1 and 3 and 5 1 and 2 and 4
Cream puffs on 3 racks
Biscuits on 3 racks
Cheese puffs on 2 racks
Savoury pies
190
210
200
2 and 4
1 and 3
1 and 3
1 and 3
Mackerel
Sole and cuttlefish
Squid and prawn kebabs
Cod fillet
Grilled vegetables
Veal steak
Sausages
Hamburgers
1
0,7
0,7
0,7
0,5
0,8
0,7
n° 4 or 5
n° 4 or 6
1
4
4
4
4
3
3
3
3
no
no
no
no
no
no
no
no
no
no
no
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
15-20
10-15
8-10
10-15
15-20
15-20
15-20
10-12
3-5
Grill*
3 or 4
2 or 3
4
4
4
4
-
3
3
3
3
-
Toasted sandwiches (or toast)
Spit-roast chicken using rotisserie spit (where present)
Spit-roast lamb using rotisserie spit (where present)
70-80
70-80
1
-
-
Grilled chicken
Cuttlefish
Spit-roast chicken using rotisserie spit (where present)
Spit-roast duck using rotisserie spit (where present)
Roast veal or beef
Roast pork
Lamb
1,5
1
1,5
1,5
1
1
1
2
2
-
2
2
-
no
no
no
no
no
no
no
210
200
210
210
210
210
210
55-60
30-35
70-80
60-70
60-75
70-80
40-45
Fan grilling*
-
-
2
2
2
2
2
2
Frozen food
Pizza
Fast cooking*
0.3
0.4
0.5
0.3
0.5
0.4
0.4
2
2
2
2
2
2
2
1
1
1
1
1
1
1
-
-
-
-
-
-
-
250
200
220
200
200
180
220
12
20
30-35
25
35
25-30
15-20
Courgette and prawn pie
Country style spinach pie
Turnovers
Lasagne
Golden rolls
Chicken bites
Pre-cooked food
Golden chicken wings
0.4
2
1
-
200
20-25
Fresh Food
Biscuits (shortcrust pastry)
Sponge cake made with yoghurt
Cheese puffs
0.3
0.6
0.2
2
2
2
1
1
1
-
-
-
200
180
210
15-18
45
10-12
Duck
Chicken
Roast veal or beef
Roast pork
Biscuits (shortcrust pastry)
Tarts
1,5
1,5
1
1
-
2
2
2
2
2
2
1
1
1
1
1
1
yes
yes
yes
yes
yes
yes
200-210
200-210
200
200-210
180
70-80
60-70
70-75
70-80
15-20
30-35
Low
temperature*
1
180
Tarts
Fruit cakes
0,5
1
2 or 3
2 or 3
2 or 3
2 and 4
2 or 3
1, 3 and 5
1, 3 and 5
2
1 or 2
1 or 2
1 or 2
1 and 3
1 or 2
1, 2 and 4
1, 2 and 4
1
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
180
180
170-180
180-190
160-170
180-190
180
200
90
210
25-35
40-50
45-55
20-25
30-40
20-25
20-25
30-35
180
Baking*
0,7
0,7
0,6
0,7
0,7
0,8
0,5
0,5
Sponge cake made with yoghurt
Small cakes on 2 racks
Sponge cake
Cream puffs on 3 racks
Biscuits on 3 racks
Filled pancakes
1, 3 and 5
2
1, 2 and 4
1
Meringues on 3 racks
Cheese puffs
20-25
0,5
2 or 3
1 or 2
yes
200
30-40
ECO*
0,7
0,6
0,7
0,5
0,5
0,5
2 and4
2 or 3
1 and3
2
1 and3
2 o 3
1 and3
1 or 2
1 and2
1
1 and2
1 o 2
yes
yes
yes
yes
yes
yes
yes
200
180
200
200
90
200
200
200
20-25
35-40
20-25
20-30
180
20-25
20-25
20-25
Fish fillets
Lamb skewers
Hamburgers
0,5
0,5
2 o 3
2 o 3
1 o 2
1 o 2
yes
Pizza
Focaccia bread
0,5
0,5
2
2
1
1
yes
yes
220
200
15-20
20-25
Pizza*
Automatic**
Baked cakes
1
1
2 or 3
1 or 2
2
1
no
no
Baked cakes
Bread***
Bread (see recipe)
* The cooking times listed above are intended as guidelines only and may be modified according to personal tastes. Oven preheating times are set as
standard and may not be modified manually.
** The duration of the automatic cooking functions are set by default. The values can be modified by the user, starting with the default duration.
*** As stated in the recipe, pour 100 g (1 dl) water into the dripping pan in position 5.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
10
Disposal
Precautions and tips
! This appliance has been designed and manufactured
in compliance with international safety standards. The
following warnings are provided for safety reasons and
must be read carefully.
GB
• When disposing of packaging material: observe local
legislation so that the packaging may be reused.
• The European Directive 2012/19/EC on Waste
Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not
be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected
separately in order to optimise the recovery and
recycling of the materials they contain and reduce
the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose
of the appliance it must be separately collected.
Consumers should contact their local authority or retailer
for information concerning the correct disposal of their
old appliance.
General safety
• The appliance was designed for domestic use inside the
home and is not intended for commercial or industrial use.
• The appliance must not be installed outdoors, even in
covered areas. It is extremely dangerous to leave the
appliance exposed to rain and storms.
• When moving or positioning the appliance, always use
the handles provided on the sides of the oven.
• Do not touch the appliance while barefoot or with wet or
damp hands and feet.
• The appliance must be used by adults only for
the preparation of food, in accordance with the
instructions provided in this booklet. Any other
use of the appliance (e.g. for heating the room)
constitutes improper use and is dangerous. The
manufacturer may not be held responsible for any
damage caused as a result of improper, incorrect
and unreasonable use of the appliance.
• Do not touch the heating elements or certain parts
of the oven door when the appliance is in use; these
parts become extremely hot. Keep children well away
from the appliance.
• Make sure that the power supply cables of other electrical
appliances do not come into contact with the hot parts of
the oven.
• The ventilation and heat dispersal openings must never
be obstructed.
Respecting and conserving the environment
• You can help to reduce the peak load of the electricity
supply network companies by using the oven in the
hours between late afternoon and the early hours of
the morning. The cooking mode programming options,
the “delayed cooking” mode (see Cooking modes) and
“delayed automatic cleaning” mode (see Care and
Maintenance) in particular, enable the user to organise
their time efficiently.
• Always keep the oven door closed when using the GRILL
and FAN GRILLING modes: this will achieve improved
results while saving energy (approximately 10%).
• Check the door seals regularly and wipe them clean
to ensure they are free of debris so that they adhere
properly to the door, thus avoiding the dispersal of heat.
! This product complies with the requirements of the latest
European Directive on the limitation of power consumption
of the standby mode.
• Always grip the oven door handle in the centre: the ends
may be hot.
• Always use oven gloves when placing cookware in the
oven or when removing it.
• Do not use aluminium foil to line the bottom of the oven.
• Do not place flammable materials in the oven: if the
appliance is switched on accidentally, the materials could
catch fire.
Maintenance and care
• When unplugging the appliance, always pull the plug
from the mains socket; do not pull on the cable.
• Do not perform any cleaning or maintenance work without
having disconnected the appliance from the electricity
mains.
Switching the appliance off
Disconnect your appliance from the electricity supply before
carrying out any work on it.
Cleaning the appliance
• If the event of malfunctions, under no circumstances
should you attempt to perform the repairs yourself.
Contact an authorised Service Centre (see Assistance).
• Do not rest objects on the open oven door.
• Do not let children play with the appliance.
• The appliance should not be operated by people (including
children) with reduced physical, sensory or mental
capacities, by inexperienced individuals or by anyone
who is not familiar with the product. These individuals
should, at the very least, be supervised by someone who
assumes responsibility for their safety or receive preliminary
instructions relating to the operation of the appliance.
• The appliance is not intended to be operated by
means of an external timer or separate remote-
control system.
• Slight differences in colour on the front of the oven are due
to the different materials used, i.e. glass, plastic or metal.
• Any shady areas resembling grooves on the oven door
glass are caused by reflections from the oven light.
• The enamel is branded at very high temperatures. This
process may cause colour variations. This is normal and
will not affect appliance operation in any way. The thin
edges of the sheet metal cannot be entirely enamelled
and may therefore appear to be unfinished. This will not
affect the rust protection.
• The stainless steel or enamel-coated external parts and
the rubber seals may be cleaned using a sponge that
has been soaked in lukewarm water and neutral soap.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
11
Use specialised products for the removal of stubborn
stains. After cleaning, rinse and dry thoroughly. Do not
use abrasive powders or corrosive substances.
• The inside of the oven should ideally be cleaned after
each use, while it is still lukewarm. Use hot water and
detergent, then rinse well and dry with a soft cloth. Do
not use abrasive products.
• All accessories - with the exception of the sliding racks
- can be washed like everyday crockery, and are even
dishwasher safe.
Replacing the light bulb
GB
To replace the oven light
bulb:
Lamp
Holder
1. Remove the glass cover
of the lamp-holder.
compartment
2. Remove the light bulb and
replace it with a similar one:
halogen lamp voltage 230 V,
wattage 25 W, cap G 9.
3. Replace the glass cover
(see diagram).
Lamp
Glass cover
• We recommend that detergents are not sprayed directly
onto the control panel, but that a sponge is used instead.
! Never use steam cleaners or pressure cleaners on the
! Do not touch the light bulb directly with your hands.
! Do not use the oven lamp as/for ambient lighting.
Sliding rack kit assembly
appliance.
Cleaning the oven door
! The door of LED INSIDE models cannot be removed.
Clean the glass part of the oven door using a sponge and
a non-abrasive cleaning product, then dry thoroughly with
a soft cloth. Do not use rough abrasive material or sharp
metal scrapers as these could scratch the surface and cause
the glass to crack.
To assemble the sliding
racks:
1. Remove the two frames,
lifting them away from the
spacers A (see figure).
A
For more thorough cleaning purposes, the oven door may
be removed:
1. Open the oven door fully (see diagram).
2. Use a screwdriver to lift up and turn the small levers F
located on the two hinges (see diagram).
2. Choose which shelf to use
Left
guide rail
Right guide
rail
with the sliding rack. Paying
attention to the direction in
which the sliding rack is to
be extracted, position joint B
and then joint C on the
frame.
F
B
C
3. Grip the door on the two outer
sides and close it approximately
half way. Pull the door towards you,
lifting it out of its slot (see diagram).
To replace the door, reverse this
sequence.
3. Secure the two frames
with the guide rails using the
holes provided on the oven
walls (see diagram). The
holes for the left frame are
situated at the top, while the
holes for the right frame are
at the bottom.
Inspecting the seals
D
Check the door seals around the oven regularly. If the seals
are damaged, please contact your nearest Service Centre
(seeAssistance). We recommend that the oven is not used
until the seals have been replaced.
4. Finally, fit the frames on
the spacers A.
! Do not place the sliding racks in position 5.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
12
• once the oven door has been locked, you cannot change
Automatic cleaning with the FAST CLEAN
function
GB
the duration and end time settings.
With the FAST CLEAN mode, the internal temperature of the
oven reaches 500°C. The pyrolytic cycle is activated, burning
away food and grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the automatic
cleaning cycle as surfaces may become very hot. Particles
may ignite inside the oven as a result of the combustion
process. There is no cause for concern: this process is both
normal and hazard-free.
Programming the automatic cleaning end time
1. Press the
button twice: the
icon and the
numerical digits on the display will begin to flash.
2. Turn the TIMER knob towards “ ” and “ ” to adjust the
cleaning end time value.
3. Once you have reached the desired end time, press the
button again. The display will show the duration, the
cleaning end time and the set cleaning level alternately.
Before initiating the FAST CLEAN mode:
• clean the oven door;
• remove large or coarse food residues from the inside of
the oven using a damp sponge. Do not use detergents;
• remove all accessories and the sliding rack kit (where
present);
• do not place tea towels or pot holders over the oven
handle.
4. Press the
button to activate the programmed mode.
Programming has been set when the
are illuminated.
5. Once cleaning has finished, “END” appears on the display
and a buzzer sounds.
and
buttons
• For example: it is 9:00 a.m. and the Economy (ECO)
FAST CLEAN level has been selected, with the default
duration of 1 hour. 12:30 is scheduled as the end time.
The programme will start automatically at 11:30 a.m.
! If the oven is too hot, the pyrolytic cycle may not start.
Wait for the oven to cool down.
! The programme may only be started once the oven door
has been closed.
To cancel programming press the
button.
!The desired Fast Clean mode will be confirmed and started
automatically if the CLOCK icon button is not pressed within
10 seconds from selecting the cooking time.
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait
for the
icon to switch off: this indicates the oven
temperature has dropped to an acceptable level. You will
notice some white dust deposits on the bottom and the sides
of your oven; remove these deposits with a damp sponge
once the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in which
case it is not necessary to remove the deposits, they are
completely harmless and will not affect your food in any way.
To activate the Fast Clean programme:
1. Switch the control panel on by pressing the
button.
2. Press button ; the display will show the text “Piro”,
“nor” and the default duration of 1:30 h (normal cycle)
alternately.
3. Press button
, then turn the TIMER knob to adjust the
default cleaning level. There are 3 different levels to choose
from, each with a pre-set duration which cannot be modified:
1. Economy (ECO): turn the knob towards “ ”. Duration
1 hour.
2. Normal (NOR): initial level. Duration 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards “ ”. Duration 2
hours.
4. Press the
5. Press the
button to confirm.
button to begin the cleaning cycle.
An end time for the FAST CLEAN cycle (as for a normal
cooking cycle) may be programmed (see Programming the
automatic cleaning end time).
Safety devices
• the door locks automatically as soon as the temperature
reaches a high value; the
display;
icon lights up on the
• pressing the
any time;
button cancels the cleaning cycle at
• if a malfunction occurs, the heating elements will be
switched off;
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
13
Troubleshooting
GB
Problem
The “Clock button” and the
digits on the display flash.
Possible cause
Solution
Set the clock.
The appliance has just been
connected to the electricity mains
or there has been a blackout.
There has been a blackout.
A programmed cooking mode
does not start.
Reprogram the cooking mode.
Only the high luminosity
“Clock button” is lit.
The appliance is in standby mode Press any button to exit
standby mode.
An automatic mode has been
selected. “Hot” appears on the
display and cooking does not
start.
The temperature inside the oven Wait for the oven to cool down.
is higher than the suggested
value for the selected mode.
Fan-assisted cooking has been
selected and the food looks burnt.
Positions 1 and 5: the direct
heat could cause
temperature-sensitive
We recommend switching
dripping pan positions halfway
through cooking.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
14
Afetr Sales Service
GB
No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the
manufacturer.
Essential Contact Information
Hotpoint Service
We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000
fully qualified engineers on call to ensure you receive fast, reliable, local service.
UK: 08448 224 224
Republic of Ireland: 0818 313 413
Please note: Our advisors will require the following information:
Model number:
Serial number:
Parts and Accessories
We supply a full range of genuine replacement parts as well as accessory products that protect and hygienically
clean your appliance to keep it looking good and functioning efficiently throughout its life.
UK: 08448 225 225
Republic of Ireland: 0818 313 413
Appliance Registration
We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you
must register your appliance with us.
UK: 08448 24 24 24
Republic of Ireland: 01 230 0800
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB
Indesit Company Unit 49 Airways Industrial Estate, Dublin 17
Recycling and Disposal Information
As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use
quality, recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully. To minimise the risk of injury to children, remove the
door, plug, and cut the mains cable off flush with the appliance. Dispose of these parts separately to ensure that
the appliance can no longer be plugged into mains socket, and the door cannot be locked shut.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
15
195102429.01
04/2013 - XEROX FABRIANO
Guarantee
GB
12 months Parts and Labour Guarantee
Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for
twelve months from the date of purchase.
This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either
workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.
This guarantee is subject to the following conditions:
-
The appliance has been installed and operated correctly and in accordance with our operating and
maintenance instructions.
-
-
-
The appliance is used only on the electricity or gas supply printed on the rating plate.
The appliance has been used for normal domestic purposes only.
The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by
any person not authorised by us.
-
-
-
Any repair work must be undertaken by us or our appointed agent.
Any parts removed during repair work or any appliance that is replaced become our property.
The appliance is used in the United Kingdom or Republic of Ireland.
The guarantee does not cover:
-
-
-
Damage resulting from transportation, improper use, neglect or interference or as a result of improper
installation
Replacement of any consumable item or accessory. These included but not limited to: plugs, cables,
batteries, light bulbs, fluorescent tubes and starters, covers and filters.
Replacement of any removable parts made of glass or plastic.
THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR NON-
DOMESTIC PREMISES.
5 Year Parts Guarantee
Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering
your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for
our engineer’s time. To activate the extra parts warranty on your appliance, simply call our registration line on
08448 24 24 24 (Republic of Ireland 01 230 0800)
Extended Guarantees
We offer a selection of protection plans that enable you to fully cover yourself against the expense of repair bills
for the life of your policy. To find the ideal plan for you please call our advice line on 08448 226 226 (Republic of
Ireland 01 230 0233).
Free Helpdesk Service
We have a dedicated team who can provide free advice and assistance with your appliance if you experience
any technical difficulties within the first 90 days of ownership. Simply call our Hotpoint Service Hotline on 08448
224 224 (Republic of Ireland 0818 313 413) for telephone assistance, or, where necessary, to arrange for an
engineer to call.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
16
|