IMPORTANT SAFEGUARDS
1HITACHI
SOLID STATE COLOR TV
27CX0B
OPERATING GUIDE
Your new HITACHI COLOR TV incorporates a host of features designed to give you
excellent performance if you follow the instructions in this manual. We recommend that
you read the following instructions and "IMPORTANT SAFEGUARDS" notice before
turning on your TV set for the first time.
This television receiver will display television closed captioning (
accordance with paragraph 15.119 of the FCC rules.
or
) in
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS ..................................................................................................................2
BEFORE OPERATING YOUR TV SET.................................................................................................10
ANTENNA CONNECTIONS.............................................................................................................10
LOCATION OF CONTROLS ..................................................................................................................12
HOW TO SELECT CHANNELS.............................................................................................................12
PICTURE CAUTIONS.............................................................................................................................13
THE GENIUS REMOTE CONTROL (CLU-681GR)..............................................................................13
HOW TO USE THE REMOTE TO CONTROL YOUR T.V. .................................................................14
-SET UP- FUNCTIONS............................................................................................................................17
-PICTURE- FUNCTIONS........................................................................................................................24
-SOUND- FUNCTIONS...........................................................................................................................25
USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS..................................................27
USING THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS....................................28
TABLE 1. VCR Precoded remote controls .....................................................................................29
TABLE 2. Cable Box Precoded remote controls ...........................................................................30
EXTERNAL CONNECTIONS.................................................................................................................30
CONNECTING EXTERNAL AUDIO AMPLIFIER..........................................................................30
CONNECTING EXTERNAL VIDEO SOURCES ..................................................................................31
CONNECTING MONAURAL AUDIO VCR or VIDEO DISC PLAYER.......................................31
CONNECTING STEREO VCR or STEREO VIDEO DISC PLAYER .........................................32
ACCESSORIES PART NUMBERS.........................................................................................................33
TROUBLESHOOTING............................................................................................................................34
RECEPTION PROBLEMS (EXTERNAL TO THE TV) .................................................................34
CHECK HERE BEFORE CALLING FOR SERVICE.....................................................................35
SPECIFICATIONS...................................................................................................................................36
HITACHI SERVICE HOTLINE ..............................................................................................................38
1
IMPORTANT SAFEGUARDS
WARNING:
POWER SOURCE:
This TV set operates only on AC 120 volts 60 Hz.
To prevent fire or shock hazard, connect this TV set to 120V AC 60Hz (house current)
ONLY. Never connect the TV to 50 Hz or DIRECT CURRENT POWER SOURCES.
This TV set is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other).
This plug will fit into the receptacle only one way.
If you are unable to insert the plug fully into the receptacle, try reversing the plug.
If the plug should still fail to fit, contact a local electrician.
To prevent shock hazard do not use this polarized plug with an extension cord,
receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
If the power cord or plug is damaged or frayed, unplug the TV set from the receptacle
and refer servicing to qualified service personnel.
To prevent fire or shock hazard, do not overload receptacle and extension cords.
POLARIZED PLUG
NO GOOD
INSTALLATION
ANTENNA
Unless your TV set is connected to a cable TV system or to a centralized antenna system,
a good outdoor color TV antenna is recommended for the best performance. However, if
you are located in an exceptionally good signal area that is free from interference and
multiple image ghosts, the indoor antenna may be sufficient.
LOCATION
Select an area where sunlight or bright indoor illumination will not fall directly on the picture
screen. Also, be sure that the location selected allows a free flow of air to and from the
perforated back cover of the TV set.
To prevent damaging the TV, do not leave the set in a place where the temperature
becomes too hot. For example, exposed to direct sunlight or near a heating device, etc.
VIEWING
This TV set may be viewed from any desired distance. Most viewers prefer a distance of
three to six feet or more, depending on screen size, for maximum eye comfort.
3
IMPORTANT SAFEGUARDS
NOTE: Model number and serial number are indicated on the back cover of the TV set.
HITACHI
SAFETY POINTS YOU SHOULD KNOW ABOUT
YOUR HITACHI TELEVISION RECEIVER
CAUTION:
* Read all of these instructions.
* Save these instructions for later use.
* Follow all warnings and instructions marked on the television receiver.
Our reputation has been built on the quality, performance, and ease of service of
HITACHI television receivers.
Safety is also foremost in our minds in the design of these units. To help you operate
these products properly, this folder illustrates safety tips which will be of benefit to you.
Please read it carefully and apply the knowledge you obtain from it to the proper
operation of your HITACHI television receiver.
Please fill out your warranty registration card at once and mail it to HITACHI. This will
enable HITACHI to notify you promptly in the improbable event that a safety problem
should be discovered in your model of product.
FOR YOUR PERSONAL SAFETY
1 This television set is equipped with a polarized alternating-current line plug (a plug
having one blade wider than the other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
2 When the power cord or plug is damaged or frayed, unplug this television set from the
wall outlet and refer servicing to qualified service personnel.
3 Do not overload wall outlets and extension cords as this can result in fire or electric
shock.
4
IMPORTANT SAFEGUARDS
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV
where the
power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
5 Do not attempt to service this television set yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
6 Never push objects of any kind into this television set through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the television set.
7 If the television set has been dropped or the cabinet has been damaged, unplug this
television set from the wall outlet and refer servicing to qualified service personnel.
8 If liquid has been spilled into this television set, unplug it from the wall outlet and refer
service to qualified service personnel.
9 Do not subject your television set to impact of any kind. Be particularly careful not to
damage the picture tube surface.
10 Unplug this television set from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
5
IMPORTANT SAFEGUARDS
11-1 Do not place this television set on an unstable cart, stand, or table. The television
set may fall, causing serious injury to a child or an adult, and serious damage to the
appliance. Use only with a cart or stand recommended by the manufacturer, or sold with
the television set. Wall or shelf mounting should follow the manufacturer's instructions,
and should use a mounting kit approved by the manufacturer.
11-2 An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart combination to
overturn.
PROTECTION AND LOCATION OF YOUR SET
12 Do not use this television set near water... for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water,
unplug the set from the wall outlet and refer to servicing personnel.
13 Choose a place where light (artificial or sunlight) does not shine directly on the
screen.
14 Avoid dusty places, since accumulated dust inside the chassis may cause failure of
the set when high humidity persists.
15 The set has slots, or openings in the cabinet for ventilation purposes, to provide
reliable operation of the receiver, and to protect from overheating. These openings must
not be blocked or covered.
6
IMPORTANT SAFEGUARDS
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug,
etc.
Never place the set near or over a radiator or heat register.
Never place the set in a "built-in" enclosure, unless proper ventilation provided.
PROTECTION AND LOCATION OF YOUR SET
16-1 If an outside antenna is connected to the television set, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built
up static charges, Section 810 of the National Electrical Code, NFPA No. 70-1975,
provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrode, and
requirements for the grounding electrode.
Click to see antenna grounding diagram.
16-2 Note to CATV system installer: (Only for the television set with CATV reception) This
reminder is provided to call the CATV system installer's attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
17 An outside antenna system should not be located in the vicinity of overhead power
lines or other electrical lights or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them might be fatal.
18 For added protection for this television set during a lightning storm, or when it is left
7
IMPORTANT SAFEGUARDS
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna. This will prevent damage due to lightning and power-line
surges.
OPERATION OF YOUR SET
19 This television set should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply at your home,
consult your television dealer or local power company. For television sets designed to
operate from battery power, refer to the operating instructions.
20 If the television set does not operate normally by following the operating instructions,
unplug this set television set from the wall outlet and refer servicing to qualified service
personnel. Adjust only those controls that are covered in the operating instructions as
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the television set to normal operation.
21 When going on a holiday: If your television set is to remain unused for a period of
time, turn the television set "off" and unplug it from the wall outlet.
IF THIS SET DOES NOT OPERATE PROPERLY
22 If you are unable to restore normal operation by following the detailed procedure in
your operating instructions, do not attempt any further adjustment. Unplug the set and
call your dealer or service technician.
23 Whenever the television set is damaged or fails, or a distinct change in performance
indicates a need for service, unplug the set and have it checked by a professional
8
IMPORTANT SAFEGUARDS
service technician.
24 It is normal for some TV sets to make occasional snapping or popping sounds,
particularly when being turned on or off. If the snapping or popping is continuous or
frequent, unplug the set and consult your dealer or service technician.
FOR SERVICING AND MODIFICATION
25 Do not use attachments not recommended by the television set manufacturer as
they may cause hazards.
26 When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer that have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric shock, or other
hazards.
27 Upon completion of any service or repairs to the television set, ask the service
technician to perform routine safety checks to determine that the television is in safe
operating condition.
9
BEFORE OPERATING YOUR TV SET
BEFORE OPERATING YOUR TV SET
ANTENNA CONNECTIONS
These sets are equipped with one VHF/UHF terminal can be used for normal TV, cable
TV (CATV), a TV game, etc.
1. VHF (75 ohm) antenna/CATV
When using a 75 ohm coaxial cable system, disconnect the VHF adaptor from the VHF
75 ohm receptacle and connect the outdoor antenna or CATV cable to a VHF 75 ohm
receptacle
2. VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor antenna, disconnect the (VHF or
UHF) indoor antenna leads from screws of the (VHF or UHF) adapter, and connect
outdoor (VHF or UHF) antenna leads to these screws of a (VHF or UHF) adapter.
3. When both VHF and UHF antennas are connected
Attach an optional ANT. MIXER to the TV antenna terminal, and connect the cables to
the ANT. MIXER.
Notes
1. If an outdoor antenna/CATV is to be used, disconnect the indoor antenna. Do not leave
both the indoor and outdoor antennas/ CATV connected at the same time, since ghosting
10
BEFORE OPERATING YOUR TV SET
and poor reception may result.
2. Consult your dealer or service store for the ANT. MIXER of VHF adaptor.
3. The special converter (decoder) will be supplied by the cable company.
11
LOCATION OF CONTROLS
LOCATION OF CONTROLS
Details are described on the page shown by the number attached to the part name
(example: ).
Front view illustration
Rear view illustration
NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. If
you do not, the played back picture may be abnormal.
HOW TO SELECT CHANNELS
TURNING THE SET ON - POWER BUTTON
Push the POWER BUTTON to turn the set ON. (To turn the set OFF, push the POWER
BUTTON again.)
VOLUME CONTROL - VOLUME CONTROL
Push the right side (
: UP ) of the VOLUME BUTTON to make the sound louder, and
the left side ( : DOWN ) of the VOLUME BUTTON to make the sound softer.
Variation of the volume is displayed in the lower part of the screen by the color bar. (Fig.
1)
FUNCTION SELECTION - AVX BUTTON
Every time the AVX BUTTON is pressed, the set alternates between the TV mode and
and AVX mode. To watch the TV, set to the TV mode. At this time, the channel number
is displayed in the upper right of the screen. To enjoy a VCR, set to the VIDEO mode.
See page 11.
CHANNEL SELECTION - CHANNEL BUTTON
Channel selection may be performed by pressing either the CHANNEL BUTTON UP
( ) or DOWN ( ). When pressing the right side ( : UP ) of the CHANNEL BUTTON,
the next higher channel is selected. When pressing the left side (
: DOWN ) of the
CHANNEL BUTTON, the next lower channel is selected. The No. of the channel to
12
PICTURE CAUTIONS
which the TV is tuned is displayed in the upper right of the screen. (Fig. 2)
The channel No. selected is displayed for approx. 8 seconds after changing channels
and disappears automatically.
(When the set is turned ON, the channel No. is displayed on the screen for approx. 15
seconds.)
PICTURE CAUTIONS
When using TV games, computers and similar products with your TV, keep the
CONTRAST and BRIGHTNESS functions at low settings. If a fixed (non-moving)
pattern is left on the screen for long periods of time at a high CONTRAST or
BRIGHTNESS setting, the image can be permanently imprinted onto the screen. These
types of imprints are not covered by your warranty because they are the result of
misuse.
This color television receiver was intended mainly for the private viewing of programs
broadcast by TV stations and cable companies and programs from other video sources.
Public viewing may require prior authorization from the broadcaster or owner of the
video program.
THE GENIUS REMOTE CONTROL (CLU-681GR)
In addition to controlling all the functions on your Hitachi Color TV, the new Genius
Remote control is designed to operate different types of VCR's (also abbreviated VTR)
and different types of CATV converters (cable boxes) with one touch. Basic operation
buttons are grouped together in one area. All other controls are separated from them
and arranged in MULTI-PAGE sections, with a display that can be switched to cover
any of the three pages. Functions are arranged and properly categorized into windows,
making operation simple even when multiple functions are to be controlled.
• To operate your TV, point the Genius remote at the remote sensor of the TV.
• To operate your VCR, point the remote at the remote sensor of the VCR.
• To operate your cable box, point the remote at the remote sensor of the cable box.
Remote control illustration
MULTI-PAGE SELECT SWITCH
Slide the switch in the direction of the arrow to select the MULTI-PAGE mode.
13
HOW TO USE THE REMOTE TO CONTROL YOUR T.V.
Button layout when "TV" is selected.
Button layout for "VCR." (Power button turns the VCR on or off.)
Button layout for "MENU/CATV." (Power button turns cable box on or off.) See pages
11 and 25.
TV EXCLUSIVE BUTTONS
These will always control the TV even when the Multi-Page select switch is in the VCR
or MENU/CATV position.
PRECODED BUTTONS
These buttons will control a VCR or a cable box when the Multi-Page select switch is in
the VCR or MENU/CATV position.
HOW TO USE THE REMOTE TO CONTROL YOUR T.V.
Remote control illustration
POWER button
Press this button to turn the TV set on or off.
RECALL button
When you want to check the channel being received, or if it has a stereo (ST) or second
audio (SA) program, press the "RECALL" button. You can also check the time, and if
the ON TIME or OFF TIME has been set. (These functions are explained in the MENU -
SET UP section beginning on page 13.)
14
HOW TO USE THE REMOTE TO CONTROL YOUR T.V.
You can also use the "RECALL" button to quickly clear many of the other on-screen
displays.
MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
The "ENTER" button will set features to your preference.
CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter a "0" first for channels 1 to 9. Use
the "100" button for channels 100 and higher.
Channel selection may also be performed by pressing channel up ( ) or down (
)
NOTE: THE TV MAY NOT RECEIVE SOME CHANNELS IF YOU ARE NOT IN THE
CORRECT AIR/CABLE MODE. SEE PAGE 14.
AVX button
The AVX (Auxiliary Video) button will select between the antenna signal and the two
sets of video input jacks each time the button is pressed.
VOLUME, MUTE buttons
Press the "VOLUME" up ( ) or down ( ) button until you obtain the desired sound
15
HOW TO USE THE REMOTE TO CONTROL YOUR T.V.
level.
To turn the sound on and off instantly to answer the telephone, etc., press the "MUTE"
button. Press the "MUTE" button again or press the "VOLUME" up ( ) button to restore
the sound.
The word "MUTE" will remain displayed if the CLOSED CAPTION feature is turned off.
The word "MUTE" will not be displayed if the CLOSED CAPTION feature is on.
LAST CHANNEL (LST-CH) button
Use this button to select between the last two channels viewed. (Good for watching two
sporting events, etc.)
16
-SET UP- FUNCTIONS
-SET UP- FUNCTIONS
Press MENU, 1, and ENTER to display 3 of the -SET UP- Functions. There are a total
of 8 -SET UP- Functions.
Use the CURSOR UP or DOWN to scroll through the functions, or use the number
buttons to highlight a function. The functions in purple can be selected by pressing
ENTER. To exit the on-screen display, press MENU or RECALL.
NOTE: To see an autodemonstration of the on-screen display and to practice using the
remote control, press and hold the POWER button on the TV set for approximately 5
seconds. Press the POWER button on the TV again to end the autodemonstration.
• CLOSED CAPTION
When CLOSED CAPTION is highlighted in purple, press ENTER to see the following
display:
Closed captions are the dialogue, narration, and/or sound effects of a television
program or home video which are displayed on the TV screen. Your local TV program
guide denotes these programs as
.
DISPLAY: ON/OFF is to turn the
display on or off.
MODE: CAPTION is for the program you are viewing.
MODE: TEXT is for additional information such as news reports or a TV program guide.
This information covers the entire screen and viewing the TV program is not possible.
TEXT may not be available with every
program.
CHANNEL 1 is used for the primary language (usually English).
CHANNEL 2 is sometimes used for a second language (may vary by region).
17
-SET UP- FUNCTIONS
Use the CURSOR UP or DOWN to highlight the function to change, press ENTER to
change the function, and press MENU to exit.
NOTE: The word MUTE will not be displayed if the DISPLAY is ON. If you do not have
sound, make sure MUTE is not set.
• INITIAL SETTING
Select -SET UP- and -INITIAL SETTINGS- when setting your TV up for the first time.
Use the CURSOR UP / DOWN or a NUMBER from the remote to highlight the functions
desired.
• AIR / CABLE
Select this function to change between regular VHF/UHF broadcasting (AIR) and cable
(CATV1 or CATV2).
Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU
to exit.
Reception channels for each mode are shown at the
right.
Refer to your cable or TV guide for channel identification standards.
18
-SET UP- FUNCTIONS
If certain CATV channels are poor or not possible in the CATV mode, set the -
AIR/CABLE- select to CATV2.
• AUTOPROGRAM
This feature will automatically store active TV channels in CHANNEL MEMORY. This
will allow you to skip over unused channels when using the CHANNEL UP ( ) or
DOWN ( ) buttons.
If the MENU button is pressed while the autoprogramming function is engaged,
programming will stop.
See CHANNEL MEMORY to add or erase additional channels.
• CHANNEL MEMORY
Use this function after AUTOPROGRAM to add or erase additional channels to the
remote control CHANNEL
,
buttons.
Add or erase additional channels while still in CHANNEL MEMORY using the
CHANNEL buttons or number buttons and then add or erase using the CURSOR
buttons.
,
,
• CLOCK SET
Use the same remote control buttons as shown in previous examples to display the
clock setting, press MENU, 1, ENTER, 2, ENTER, 4, ENTER.
Once the proper time is set (including AM or PM), press MENU to start.
• CHANNEL CAPTION
Use this feature to give channel names to up to 24 channels for the antenna source
(ABC, PAY1, CMDY, etc.).
19
-SET UP- FUNCTIONS
To display this function, press MENU, 1, ENTER, 3, ENTER.
Press the CURSOR
,
to select letters.
Press the CURSOR , to change position.
Press CHANNEL
,
or the number buttons to select and label additional channels.
Press MENU to exit.
The (*) represents a blank space.
Select CANCEL to erase a CHANNEL CAPTION.
• PROGRAM LIST
This function allows you to view which channels are labeled in CHANNEL CAPTION
(NAME), which have been added to CHANNEL MEMORY (SCAN) and which are
protected by CHILD LOCK (LOCK). Press MENU, 1, ENTER, 4, ENTER to view.
Press the CURSOR
Press MENU to exit.
,
to view more channels.
• TIMER SET
This function will automatically turn the TV on or off.
Press 1, ENTER, to select the ON TIMER.
NOTE: If the clock has not been set, the display will be for clock setting as shown on page
16.
20
-SET UP- FUNCTIONS
Press the CURSOR , buttons for TIMER SET: ON or OFF and MODE: 1 SHOT
(one time only) or MODE: DAILY (TV will turn on at the same time every day).
Press the number buttons to select the CHANNEL the TV will tune to when the TV
automatically turns on.
Press the CURSOR buttons to set the ON TIME.
Press ENTER after each selection. Your choice will appear in "blocked" letters.
Press MENU to start.
Repeat the previous steps to select and set the OFF TIMER.
Remember to press ENTER after making selections with the CURSOR buttons.
Press MENU to start.
CAUTION: The OFF TIMER is a one time only operation. Do not try to use your TV as a
deterrent when away from home by using both the ON and OFF TIMERS. The OFF TIMER
function will not work until you reset it and the next ON TIME (when using DAILY MODE)
will leave the TV set turned on until you press the power button on the TV or remote control
to turn it off.
• AUTOMATIC MESSAGE
Use this function to set up two personal messages once a day or one time only. Setting
the AUTOMATIC MESSAGE is the same as setting CHANNEL CAPTION and ON
TIMER. Press MENU, 1, ENTER, 6, ENTER to get the AUTOMATIC MESSAGE
display. (You can also use the CURSOR
and then select the function.)
,
to "scroll" to AUTOMATIC MESSAGE
Use the CURSOR
,
to select a letter or other character.
Use the CURSOR , to change position.
21
-SET UP- FUNCTIONS
The asterisk (*) represents a blank space.
When finished with your message press ENTER.
Press the CURSOR and ENTER buttons to set the functions shown in the same way as
you set the OFF TIMER.
Press MENU to start.
FIVE beeps will be heard when the AUTOMATIC MESSAGE is displayed.
Examples: Use this message function to remember to take daily vitamins, or use the 1
SHOT to remember to call a friend.
CAUTION: Do not leave an AUTOMATIC MESSAGE on the TV screen for more than 48
hours at a time. A pattern burn may develop and this is not covered by your warranty. The
message can be erased from the TV by pressing RECALL, MUTE, LST-CH, etc.
2• CHILD LOCK
This function will block out the picture and sound of the selected channel. Press MENU, 1,
ENTER, 7, ENTER to display CHILD LOCK.
The code to set or cancel CHILD LOCK is a three digit key number. The factory preset
key number is 000.
The picture and sound will now be blocked out for this channel. Repeat the same steps
to cancel the CHILD LOCK.
To change the key number, select key number change. Enter the old number (factory
preset 000 for first time use), then enter a new three digit key number you prefer.
22
-SET UP- FUNCTIONS
If you forget your key number, use the factory code 777 to erase your key number. This
will reset the key number back to the factory preset 000.
• VOLUME CORRECTION
Use this function to reduce the volume level of up to four TV channels that sound loud
compared to other TV channels. Press MENU, 1, ENTER, 8, ENTER to display
VOLUME CORRECTION.
Press the CURSOR , to select volume level.
Press ENTER to set the volume level.
Press MENU to exit.
23
-PICTURE- FUNCTIONS
-PICTURE- FUNCTIONS
PICTURE PROGRAM is for your preferred settings - contrast, color, etc.
Press MENU, 2, ENTER to display the -PICTURE- PROGRAM functions.
• PICTURE PROGRAM
You can have two settings, PREFERENCE or use the factory PRESET settings.
Press MENU, 2, ENTER to select the PICTURE PROGRAM.
Press MENU, 2, ENTER, 2, ENTER, to select PRESET.
Press the CURSOR buttons to select and make adjustments.
CONTR - Use this function to change the contrast between black and white levels in the
picture.
COLOR - Use this function to adjust the level of color in the picture.
TINT - Use this function to adjust flesh tones so that they appear natural.
BRIGHT - Use this function to adjust overall picture brightness.
SHARP - Use this function to adjust the amount of fine detail in the picture.
WHITE CONTROL: COOL STD Use this function to adjust the white balance (hue) of
the picture to your own color preference. When shipped from the factory, this is set to
"cool." If you prefer a reddish screen, set to "STD."
24
-SOUND- FUNCTIONS
-SOUND- FUNCTIONS
Press MENU, 3, ENTER to display the -SOUND- functions.
SOUND PROGRAM is for your preferred settings - balance, bass and treble.
SOUND PROGRAM is used to improve the sound quality.
• SOUND PROGRAM
You can have two sets of settings, PREFERENCE, or use the factory PRESET settings.
Press MENU, 3, ENTER, 1, ENTER to select the SOUND PROGRAM.
Press the CURSOR buttons to select and make adjustments.
BALANCE - This function will control the left, right balance of the TV internal speakers,
the AUDIO TO HI-FI output and the surround speakers.
BASS - This function controls the low frequency audio to all speakers.
TREBLE - This function controls the high frequency audio to all speakers.
• SOUND SETTING
Use the sound settings to improve the sound performance of your TV depending on
listening conditions.
Press MENU, 3, ENTER, 2, ENTER to display the SOUND SETTING.
Use the CURSOR
,
to select a function.
Press ENTER to set a function or to turn it on or off.
• MTS MODE (Multi-Channel Television Sound)
will allow you to select STEREO (a stere broadcast), SA (second audio) program which
25
-SOUND- FUNCTIONS
may be a secondary language, weather report, etc., or MONO (monaural sound) used
when receiving a weak stereo broadcast.
The sources received will be displayed below the channel number. The source you
select will be displayed to the left of the channel number. See example below for each
selection when both stereo and second audio are received (monaural is always
received).
• LOUDNESS
This function will improve the quality of both low and high frequency sounds when
listening at low volume levels.
• INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use
only speakers from a separate stereo system.
• SURROUND SOUND STEREO
Surround sound allows the viewer to enjoy sound which provides a feeling of "presence"
from stereo broadcasts and VCR tapes* recorded with stereo sound.
* Your VCR player must be a Hi-Fi or stereo unit. See page 27 for stereo VCR
connection.
* Set must be outputting stereo. (See MTS • mode: stereo (above).)
26
USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS
USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS
• To operate your VCR, point the Genius remote at the remote sensor of the VCR.
The Genius remote is designed to operate different types of VCR's. You must first
program the Genius remote to match the remote system of your VCR (Refer to Table 1
on page 26).
(1) Turn ON your VCR.
(2) Set the Multi-page switch on the Genius remote to VCR.
(3) AIM the Genius remote at the front of your VCR.
(4) While holding down the SELECT button, press the button that matches your VCR as
shown on page 26. The channels on the VCR will begin changing after 5 seconds when
the correct button is pressed. When this happens the Genius Remote control is
programmed for your VCR. If the VCR channels do not change after 5 seconds, try a
different Genius Remote button.
(5) Release both buttons when the VCR begins to change channels. The precoded VCR
buttons will now control your VCR.
NOTES:
• If your VCR cannot be operated after performing the above procedure, the codes have not
been precoded into the Genius remote control and it will not be able to operate your VCR.
• You will only have to program your remote control to match your VCR once. The remote
will remember the codes until you replace the batteries.
• Whenever you install or replace batteries in the Genius remote, you must reprogram the
Genius remote to match the remote system of your VCR.
• When operating your TV or a cable box, remember to set the Multi-Page select switch to
the proper position.
• Refer to the instruction manual for the VCR to operate buttons exclusively for the VCR.
• Be sure to keep the original remote control for the VCR even if you use the Hitachi Genius
remote to control your VCR.
27
USING THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS
USING THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS
• To operate your cable box, point the Genius remote at the remote sensor of the cable
box.
The Genius remote is designed to operate different types of cable boxes. You must first
program the Genius remote to match the remote system of your cable box (Refer to
Table 2 on page 26).
(1) Turn ON your cable box.
(2) Set the Multi-page switch on the Genius remote to MENU/CATV.
(3) AIM the Genius remote at the front of your cable box.
(4) While holding down the SELECT button, press the button that matches your cable
box as shown on page 26. The channels on the cable box will begin changing after 5
seconds when the correct button is pressed. When this happens the Genius Remote
control is programmed for your cable box. If the cable box channels do not change after
5 seconds, try a different Genius Remote button.
(5) Release both buttons when the cable box begins to change channels. The precoded
cable box buttons will now control your cable box.
NOTES:
• If your cable box cannot be operated after performing the above procedure, the codes
have not been precoded into the Genius remote control and it will not be able to operate
your cable box.
• You will only have to program your remote control to match your cable box once. The
remote will remember the codes until you replace the batteries.
• Whenever you install or replace batteries in the Genius remote, you must reprogram the
Genius remote to match the remote system of your cable box.
• When operating your TV or VCR, remember to set the Multi-Page select switch to the
proper position.
• Be sure to keep the original remote control for the cable box even if you use the Hitachi
Genius remote to control the cable box.
28
USING THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS
TABLE 1. VCR Precoded remote controls
VCR BRAND
Press SELECT and this button
Canon
6
Citizen
0
Curtis Mathes
Dimensia
GE
Goldstar
Hitachi
2/6
2
2/6
0
1
Instant Replay
JC Penny
JVC
6
1/6/9
0
Kenwood
Magnavox
Marantz
Marta
0
4/6
9
0
Memorex
MGA
6
7
Minolta
1
Mitsubishi
7
Montgomery Ward CHANNEL
NEC
9
6
Panasonic
Pentax
Philco
Philips
Pioneer
ProScan
Quasar
RCA
1
4/6
4/6
1
6
2
1/2
Realistic
Sanyo
6/9/CHANNEL
9
Scott
7/8
Sears
1/9
Sharp
CHANNEL
Sony
5/VOLUME /VOLUME
Sylvania
Tashiko
Technics
Toshiba
Wards
Yamaha
Zenith
4/6
0
6
1/8
CHANNEL
9
3/5
29
EXTERNAL CONNECTIONS
TABLE 2. Cable Box Precoded remote controls
CATV Brand
Press SELECT and this button
General Instrument 0/1/2/3/8
Hamlin
4
Jerrold
Pioneer
Regal
Scientific Atlantic
Viewstar
Zenith
0/1/2/3/8
7
4
6
9
5
EXTERNAL CONNECTIONS
CONNECTING EXTERNAL AUDIO AMPLIFIER
To control the audio level of an external audio amplifier with the remote transmitter,
connect the system as shown below. (Fig. 1)
NOTE: To prevent damage to the speaker and distorted sound, set the volume control of
the audio amplifier lower and adjust the sound level using the volume control on the remote
transmitter of the TV set.
30
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING EXTERNAL VIDEO SOURCES
The exact arrangement you use to connect the Video Cassette Recorder, Video Disc
Player and Video Camera to your TV set is dependent on the model and features of
each component. Check the Owner's Manual of each component for the location of its
video and audio inputs and outputs. The following connection diagrams are offered as
suggestions. However, you may need to modify them to accommodate your particular
assortment of components and features. For best performance, video and audio cables
should be made from coaxial shielded wire.
Before Operating External Video Source
The input mode is changed every time the AVX button is pressed as shown below.
Connect External Video source to the INPUT terminal, then press AVX button as
necessary to view the input source.
NOTE: When the TV is set to "VIDEO" and a video signal is not received from VIDEO
INPUT JACK on the back panel of the TV (i.e., VCR/Video Disc Player, etc. is not
connected or the video input device is OFF), the screen will be blank gray or blue in color.
CONNECTING MONAURAL AUDIO VCR or VIDEO DISC PLAYER
Connect the cable from the VIDEO OUT of the VCR or the Video Disc
Player to the INPUT (VIDEO) jack on the TV set. (Fig. 1)
Connect the cable from the AUDIO OUT of the VCR to the INPUT
(MONO)/L (AUDIO) jack. (Fig. 1)
Press the AVX button to view the program from the VCR or the Video Disc
Player. The video mode "VIDEO" disappears automatically after approx. 8 seconds.
Press the AVX button to return to the previous channel.
31
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING STEREO VCR or STEREO VIDEO DISC PLAYER
Connect the cable from the VIDEO OUT of the VCR or the Video Disc
Player to the "INPUT (VIDEO)" jack on the TV set. (Fig. 1)
Connect the cable from the AUDIO OUT "R" of the VCR or the Video Disc
Player to the "INPUT (AUDIO/R)" jack (Fig. 1).
Connect the cable from the AUDIO OUT "L" of the VCR or the Video Disc
Player to the "INPUT (AUDIO/L)" jack (Fig. 1).
Press the AVX button to view the program from the VCR or Video Disc
Player. The video mode "VIDEO" disappears automatically after approx. 8 seconds.
Press the AVX button to return to the previous channel.
32
ACCESSORIES PART NUMBERS
ACCESSORIES PART NUMBERS
For information regarding how to obtain these accessories, please call TOLL FREE 1-
800-448-2244 fro your nearest Hitachi Authorized Parts Distributor in the continental
United States. For Alaska and Hawaii, please contact the nearest Hitachi Regional
Office.
CAUTION: The television stands Model SP291G and Model SP292B are designed for use
only with Hitachi TV Model 27CX0B. Use with other television equipment may result in
instability, causing possible injury.
TRANSMITTER BATTERY INSTALLATION AND REPLACEMENT
Open the battery cover of the Remote transmitter by pushing the notched part of the
cover with your finger.
a) Push the batteries towards the spring and lift them out.
b) Replace old batteries with two new "AA" size (SUM-3) batteries or equivalent.
c) Match the (+) and (-) marks in the battery compartment.
d) Replace the cover.
CAUTIONS
1. If your television set is to remain unused for a long period of time, for instance, when you
go on a vacation, unplug the television set from the wall outlet.
2. Do not subject the Remote transmitter to shocks such as dropping it on the floor, etc.
Precision parts may be damaged.
33
TROUBLESHOOTING
3. Do not allow the Remote transmitter to become wet and avoid placing it in areas of high
humidity. Don't leave it on or near a heater. Excess heat or moisture may cause the unit to
cease operation.
4. If the batteries become exhausted, Remote control operation may become erratic or stop
altogether. Replace the old batteries with two fresh "AA" (SUM-3) types.
NOTES
1. When the power button is set to OFF, the OFF TIMER is released.
2. The channel No. indication, volume indication and OFF TIMER indication are not
displayed simultaneously.
3. To operate your TV, point the Remote transmitter at the remote sensor of the TV.
TROUBLESHOOTING
RECEPTION PROBLEMS (EXTERNAL TO THE TV)
• IGNITION NOISE:
Black spots or horizontal streaks may appear, picture may flutter or drift. Usually
caused by interference from automobile ignition systems, neon lamps, electrical drills
and other electrical appliances.
• GHOSTS:
Ghosts are caused by the television signal following two paths. One is the direct path
and the other is reflected from tall buildings, hills or some other objects. Changing the
direction or position of the antenna may improve reception. Ghosting may also be
caused by defects in the antenna system such as unshielded leads or connecting
several sets to the same antenna without using multiple antenna couplers.
34
TROUBLESHOOTING
• SNOW:
If your receiver is located in the fringe area of a television station where the signal is
weak, your picture may be marred by the appearance of small dots. When the signal is
extremely weak, it may be necessary to install a special antenna to improve the picture.
• RADIO FREQUENCY INTERFERENCE:
The interference produces moving ripples or diagonal streaks, and in some cases,
causes loss of contrast in the picture.
CHECK HERE BEFORE CALLING FOR SERVICE
Troubleshooting chart
35
SPECIFICATIONS
SPECIFICATIONS
Features:
• Super Fine Quality
600 Lines Horizontal Resolution
• Genius Remote
Controls many VCR brands and cable boxes
• Full Function Menu On-Screen Display
• Closed Caption Decoder
• Comb Filter, Wide-Band Video-Amp and White Control
• MTS (Multi-Channel Television Sound) Stereo Broadcast Reception
• Surround Sound
Screen Size: 27V (27 inches measured diagonally)
Inputs:
• Power input....................................AC 120V, 60Hz
• Power Consumption.......................109W
• Power Consumption (maximum).....145W
• Antennal input impedance...............75 Ohm
• Channel coverage...........................181 ch.
VHF Band......................................2~13
UHF Band......................................14~69
CATV Mid Band............................A-5~A-1, A-I
Super Band.....................................J-W
Hyper Band....................................W+1-W+28
Ultra Band......................................W+29-W+84
• Video............................................1.0Vp-p, 75 Ohm
• S-Video
Luminance (Y)...............................1.0Vp-p, 75 Ohm
Chrominance (C)...........................0.286Vp-p, 75 Ohm
• Audio input impedance..................47 kOhm
Average input level........................470mVrms
Maximum input level......................940mVrms
Outputs:
• Video...........................................1.0Vp-p, 75 Ohm
• Audio (fixed)................................470mVrms, 1 kOhm
Dimensions:
27CX0B
• Height (in.) 22 7/8
• Width (in.) 27 1/16
• Depth (in.) 20 3/16
• Weight (lbs.)
88.0
36
SPECIFICATIONS
NOTE: Due to improvements, specifications in this operating guide are subject to change
without notice.
37
HITACHI SERVICE HOTLINE
HITACHI SERVICE HOTLINE
To locate an authorized HITACHI service facility in the continental U.S.A.
DIAL TOLL FREE
7 days a week, 24 hours a day
800 HITACHI
1-800-448-2244
Hitachi Home Electronics (America), Inc.
Hitachi has made every effort to assure you hours of trouble free operation from your
unit. However, should you require service, a network of Hitachi Authorized Service
Facilities has been established in all 50 states and Puerto Rico. Each facility will
provide you with convenient and expedient assistance. Our service "Hotline" operator
will direct you to the Hitachi Authorized Service Facility nearest you. Just present proof
of purchase and/or delivery receipts to the Hitachi Authorized Service Facility, and
service will be rendered in accordance with the terms of the limited warranty as stated
on your warranty card or operating guide.
Should you have any questions regarding in-warranty service, operation or
technical assistance, please contact:
Hitachi Home Electronics (America), Inc
3890 Steve Reynolds Blvd
Norcross, GA 30093
Tel: 404-279-5600
Hitachi Sales Corporation of Hawaii
3219 Koapaka St.
Honolulu, HI 96819
Tel: 808-836-3621
1Introduced in the 94-95 product line. Only mention as a current model!
Warranty: 1 year Labor, 1 year Part, 2 years CRT.
27CX0B: 600 Lines of Resolution, Matrix Surround Sound, Slim Genius Remote.
Optional Stand: SP292B
2You can always either lock or unlock any one of the four channels using code "777", regardless of what
the key number actually is. Code "777" will always lock or unlock each station.
38
|