HP Hewlett Packard L1800 User Manual

HP D5065 Series  
L1800  
18.1 -inch LCD Color Monitor  
18.1-inch Viewable Image  
User’s Guide  
18,1-Zoll-LCD-Farbbildschirm  
18,1 Zoll Bildanzeige  
Benutzerhandbuch  
Moniteur LCD couleur 18,1 pouces  
Affichage 18,1 pouces  
Guide de l’utilisateur  
Monitor LCD en color de 18,1 pulgadas  
18,1 pulgadas de imagen visualizada  
Manual del Usuario Léase esto primero  
Video a colori LCD da 18,1 pollici  
18.1 effettivi per l’immagine  
Manuale utente  
1
Anti-glare, anti-static screen coating  
0.28 mm dot pitch for excellent  
graphics  
Full scan TFT screen that gives  
an edge to edge image  
On/off switch  
Status indicator  
Auto-configuration button  
Video Input LEDs.  
Button to select Video  
Input  
Button to operate on-screen  
menus  
Multi-function adjustment control and  
browser  
HP D5065 Series  
L1800 18.1-inch LCD  
Color Monitor  
User’s Guide  
HP 18.1” LCD Color Monitor User’s Guide  
Important Safety Instructions  
Important Safety Instructions  
Please read these safety instructions and the safety instructions contained in  
your Quick Setup Guide before plugging in your new monitor.  
WARNING  
Use only the AC/DC adapter supplied with the product. Connect the monitor  
to a grounded power outlet. Use the power cord supplied with this monitor or  
one with a properly grounded plug. Ensure that the cable meets your country’s  
standards for safety.  
To completely disconnect power at the monitor, remove the power cord from  
the power outlet. Ensure that the power outlet is easily accessible.  
To reduce the risk of electric shock, do not remove cover (or back) and do not  
open the AC/DC adaptor. There are no user serviceable parts inside. Refer  
servicing to qualified service personnel.  
The monitor is quite heavy (the weight is shown in the technical  
specifications). We recommend you ask the assistance of a second person  
when lifting or moving it.  
USA and Canada  
If the power cord is not supplied with your monitor, select the proper power  
cord according to your national safety codes.  
USA: use a UL Listed type SVT detachable power cord  
Canada: use a CSA certified detachable power cord.  
Si le cordon secteur n’est pas livré avec votre moniteur, utiliser un cordon  
secteur en accord avec votre code électrique national.  
USA: utiliser un cordon secteur UL Listé de type SVT.  
Canada: utiliser un cordon secteur certifié CSA.  
2 English  
HP 18.1” LCD Color Monitor User’s Guide  
What Your New Monitor Offers  
What Your New Monitor Offers  
Your HP monitor is a 18.1-inch (diagonal and viewable image), high resolution,  
liquid crystal multi-synchronous color monitor. Multi-synchronous means that  
the monitor supports a large range of video modes (see “Supported Video  
Modes“ on page 16). It is optimized to be used with all Hewlett-Packard  
computers.  
Your HP LCD color monitor has the following features:  
A 18.1-inch Thin Film Transistor (TFT) liquid crystal display. It has a  
non-glare, antistatic screen coating.  
Large viewing angle.  
Support of video modes up to 1280 × 1024 at a 75 Hz refresh rate.  
Hot key auto-configuration of display position, clock and phase.  
1
Power management system (VESA standard) controlled from suitably  
equipped HP computers to automatically reduce the power consumption of  
the monitor. Complies with the Energy Star Computers Program initiated  
2
by the US EPA specification for energy efficient monitors. As an Energy  
Star Partner, Hewlett-Packard has determined that this product meets the  
3
Energy Star guidelines for energy efficiency.  
Plug and Play capability (compliant with VESA DDC1,DDC2B and DDC2Bi  
standards) that enables the monitor to identify itself to suitably equipped  
HP computers.  
Your HP monitor complies with ISO 9241-3/8 and ZH-1/618 ergonomic  
standards.  
Your HP monitor complies with TCO 99 requirements (Some models only).  
USB-Hub (Universal Serial Bus-Hub) integrated in the monitor base (some  
models only). Allows you to connect one up- and 4 downstream USB  
devices.  
Two signal connectors on the rear panel enabling connection to two  
computers.  
Slot for security lock.  
A programmable sleep mode timer which can prolong the life of your  
monitor.  
1.  
2.  
3.  
VESA is the Video Electronics Standards Association  
The US EPA is the United States Environmental Protection Agency  
ENERGY STAR is a US registered service mark of the US EPA.  
English 3  
HP 18.1” LCD Color Monitor User’s Guide  
Securing Your Monitor  
Securing Your Monitor  
The monitor can be secured to your desk, or any other fixed object, using a  
Kensington lock security cable. The cable can be attached to a slot located on  
the rear of the monitor.  
1
2
3
Insert the lock in the slot located on the rear of the monitor.  
Turn the key to lock the cable to the monitor.  
Remove the key and store it in a safe place.  
NOTE  
The Kesington lock is not an HP accessory. It cannot be ordered from HP.  
Contact your reseller for more information.  
4 English  
HP 18.1” LCD Color Monitor User’s Guide  
Connecting Additional Devices to Your Monitor  
Connecting Additional Devices to Your Monitor  
The following diagram indicates additional devices that can be connected.  
Please refer to your Quick Setup Guide (Step 3 - Connecting the Cables)  
before connecting any additional devices.  
Microphone In  
jack  
Video Input Connector  
Video Input Connector  
1
2
Headphone/Speaker  
In jack  
Headphone/Speaker  
Out Jack  
Microphone Out  
jack  
USB Connectors  
(Some Models Only)  
Connecting Two Computers  
Your LCD monitor has two signal connectors located on the rear panel (see  
“Selecting Video Input“ on page 11). This enables you to connect your monitor  
to two computers at the same time.  
USB Connectors  
A USB-Hub is integrated in the base of your monitor stand. USB connectors  
automate peripheral connection by using plug and play install procedures.  
Connect your USB device to your computer as indicated in the Quick Setup  
Guide. Connect USB compatible plug and play devices such as a keyboard,  
mouse, joystick or digital USB camera (if supported by your computer) to any  
of the four remaining downstream connectors.  
Connecting Headphones/Speakers and a Microphone  
Your monitor provides headphone/speaker and microphone sockets on the  
rear panel.  
English 5  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Configuring Your Monitor  
You can auto configure your monitor, adjust contrast and brightness and  
select a video input channel using the controls located on the front panel of  
your monitor.  
Indicator light  
On/Off switch  
Video Input LEDs  
AUTO button  
button  
Button to adjust  
video input  
Control (multi-function control for  
adjusting brightness/contrast, menu browser  
and adjustment control)  
OSD  
(On-screen display)  
Adjustments to the LCD monitor’s features are made from the OSD  
(on-screen display).  
1
2
Press  
to enter the OSD main menu.  
Select the feature you require using the  
confirm your selection.  
control, then press  
to  
NOTE  
To exit the main menu select EXIT from the OSD main menu. You can exit all  
menus at any time by double clicking the  
button.  
Changing the Language of your OSD  
Your OSD operates in several different languages.  
To change the language of your OSD main menu:  
1
Select  
from the OSD menu, then press  
to enter the LANGUAGE  
submenu.  
2
Select a language from the list using the  
control, then press  
to  
confirm your selection and return to the main menu.  
6 English  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Optimizing Image Quality  
Each time you connect your monitor to a different computer you should use  
the HP Optimizer Utility, supplied on floppy disk, to optimize the quality of the  
image. This utility displays test patterns that help you configure your monitor  
correctly. (For installation instructions, see your Quick Setup Guide).  
Adjust the following to optimize image quality:  
Brightness and Contrast  
To adjust brightness and contrast directly:  
1
2
Rotate the adjustment control to select  
or  
.
Make your adjustments using the control.  
It is recommended that you select a value of around 70% for brightness and  
50% for contrast.  
3
Press  
to save your adjustments.  
NOTE  
You can also adjust the contrast and brightness by selecting  
CONTRAST or  
BRIGHTNESS from the OSD main menu. Make your adjustments using the  
control, then press  
to return to the OSD main menu.  
Auto-Configuration  
If you use auto-configuration you can configure your monitor without having  
to adjust your monitor’s position, clock frequency and phase manually. To use  
auto-configuration, follow the instructions in your HP Optimizer Utility (for  
installation instructions, see your Quick Setup Guide).  
NOTE  
With auto-configuration it is not necessary to adjust  
H POSITION,  
V
POSITION CLOCK or PHASE. However, if the results are unsatisfactory,  
follow the on-screen instructions in the HP Optimizer Utility to adjust these  
options manually.  
English 7  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Color  
Your monitor displays a combination of red, blue and green to show a full color  
image. To change the proportions of red, blue and green, you need to change  
the color temperature:  
1
2
Select  
and press  
to enter the COLOR sub menu.  
Select the feature you require using the  
confirm your selection.  
control, then press  
to  
3
a) If you are selecting a preset color temperature, select EXIT, then press  
to return to the main menu.  
b) Otherwise, select R, G or B from the USER COLOR submenu that appears and  
then press  
to confirm your selection.  
4
5
Adjust the color level using the  
selection.  
controls, then press  
to save your  
Select SAVE AND EXIT, then press  
to return to the main menu.  
NOTE  
To reset the color settings when in the USER COLOR submenu, select RESET and  
press to confirm your selection, then continue with Step 5.  
Restoring the Default Settings  
To return to the position, clock and phase default settings:  
1
2
Select  
then press  
to enter the MODE RECALL sub menu.  
control, then press to confirm your selection.  
Select YES using the  
The monitor image will disappear for a few seconds while the monitor restores  
its default settings.  
8 English  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Setting the Timer  
Your monitor has a time control function that can prolong the lifetime of your  
monitor. This enables you to set a time for your monitor to power on and  
power off each day. To set the timer:  
1
Select  
then press  
to enter the TIMER submenu.  
2
Select the feature you require using the  
confirm your selection.  
control, then press  
to  
The following table describes the time control options available:  
Menu Item  
Use to  
Action  
Current Time  
Set the current local  
time  
1. Select the hour setting using the  
control, then  
to confirm  
press  
to confirm your selection.  
2. Select the correct hour, then press  
your selection.  
Standby Time  
On Time  
Set the time at  
which you wish your  
LCD to switch OFF  
3. To select the minute setting repeat Steps 1 and 2.  
Set the time at  
which you wish your  
LCD to switch ON  
4. When the correct time is set, select EXIT, then press  
to return to the TIMER sub menu.  
Timer ON/OFF  
Switch the timer ON 1. Select ON or OFF using the  
or OFF  
control.  
2. Press  
to make your selection and return to  
the TIMER sub menu.  
3
Select EXIT, then press  
to return to the main menu.  
NOTE  
When the monitor is in power off mode the front panel indicator flashes amber.  
To reactivate your monitor when in power off mode, press the on/off button.  
Every time your monitor is unplugged you will need to reset your monitor’s  
timer.  
English 9  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Adjusting the Image Size  
If the display properties in your computer are set to a resolution lower than  
1280 × 1024, your monitor will be of lower quality when in full-screen mode.  
This is due to the approximations made in the scaling process. To display the  
image at the optimum quality:  
1
Select  
from the on-screen main menu and press  
to enter the  
IMAGE SIZE submenu.  
2
Select the feature you require using the  
control, then press  
to  
confirm your selection and return to the mainmenu.  
The following table describes the options available:  
Image Size  
Menu Item  
Use to...  
FULL SCREEN  
ASPECT RATIO  
Display the image at a size that fills the entire screen  
Display the image at maximum size, while maintaining the aspect ratio of the  
original image  
1:1  
Display the image at actual pixel size  
NOTE  
If your are using a video resolution of 1280 × 1024, selecting ASPECT RATIO will  
not alter the size of the image.  
10 English  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Selecting Video Input  
The rear of your monitor has two video input connectors to connect one or  
two computers (see “Connecting Two Computers, on page 5”). The Video  
Input LEDs located on the front panel of the monitor indicate which  
connector is receiving input. Use either auto or manual selection to select the  
appropriate input option.  
Auto Selection  
When you first connect your computer to the monitor, the monitor  
automatically selects one of the following combinations, depending on which  
connector is receiving input.  
1
1
AUTO 2  
AUTO 2  
If two operational computers are connected, the monitor automatically selects  
the computer that has input priority (see “Selecting Input Priority“ on page  
12). If the monitor detects no input from the computer with priority, it  
automatically searches for a signal from the second computer.  
Manual Selection  
To manually select an input channel, use the video input button  
underneath the front panel of the monitor.  
located  
If you want to receive a signal from a computer connected to  
following.  
1 select the  
1
AUTO 2  
If you want to receive a signal from a computer connected to  
following:  
2 select the  
1
AUTO 2  
If two operational computers are connected, the monitor is only able to detect  
input from the computer connected to the connector selected.  
NOTE  
To return to auto selection at any time select AUTO.  
English 11  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Selecting Input Priority  
When your monitor is connected to two computers, you will need to give  
priority to one computer. This computer is selected every time you switch on  
your monitor and when using auto selection (see “Auto Selection“ on page  
11). To choose which computer has priority:  
1 :  
2
1
Select  
sub menu.  
from the main menu, then press  
to enter the INPUT PRIORITY  
2
Select INPUT 1 or INPUT 2 using the adjustment control, then press  
to  
save your selection and return to the OSD main menu.  
The displayed image will disappear for a few seconds. The message INPUT  
PRIORITY appears while the monitor makes your selection.  
NOTE  
Input 1 and Input 2 correspond to connectors 1 and 2 on the rear of the monitor.  
Obtaining Information  
To obtain information about your monitor, select one of the following main  
menu items:  
Menu Item  
SERIAL NUMBER  
Select to...  
Display the serial number of your monitor  
Display the estimated life span of the monitor’s backlight  
BACKLIGHT TIME  
MODE INFO  
1
Display the video mode currently in use  
2
Display the preset modes and user modes available  
1. Contains a record of any adjustments that the user makes in the main menu system.  
2. Standard configurations pre-loaded at the factory.  
12 English  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Changing the OSD Settings  
To change the position of the OSD or adjust the length of time each menu is  
displayed:  
OSD  
1
Select  
and press  
to enter the OSD MANAGER submenu.  
2
Select the feature you require using the adjustment control, then press  
to confirm your selection.  
The following table describes the OSD settings available:  
OSD Manager  
Menu Item  
Use to Adjust...  
Action  
PROTECTED OSD  
OSD TIMEOUT  
(See “Protected OSD“ on page 14)  
The duration for which your on-screen  
menu appears on screen  
Adjust the number of seconds using  
the adjustment control, then press  
to return the OSD  
MANAGER submenu.  
INFORM ON/OFF  
The duration of the information box  
that appears on screen when your  
monitor is switched on  
Select ON or OFF using the  
adjustment control, then press  
to confirm your selection.  
V POSITION  
H POSITION  
The vertical position of the OSDs  
The horizontal position of the OSDs  
Adjust the position of the menu  
using the adjustment control, then  
press  
to return to the OSD  
MANAGER submenu.  
3
Select EXIT, then press  
to return to the main menu.  
English 13  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Protected OSD  
When this mode is selected the user can adjust the brightness/ contrast and  
OSD Manager only. To enable or disable protected OSD mode:  
1
Select PROTECTED OSD to enter the PROTECTED OSD submenu.  
1
2
3
Select each digit of the six figure password using the  
each time to confirm your selection.  
control, pressing  
When you have selected the correct password a sub menu is displayed.  
Select YES or NO to select or deselect Protected OSD, then press  
to  
exit.  
Setting the Amount of Displayed Information  
To set the amount of displayed information, change the screen resolution of  
your computer. The higher the screen resolution, the more information you  
can see on the screen. It is recommended that you use a resolution of  
1280×1024.  
It is recommended that you use a refresh rate of 60 Hz. The image refresh rate  
is the number of times per second that the image is redrawn.  
To find out which resolutions and refresh rates are supported by your  
monitor, refer to “Supported Video Modes” on page 16. To change the screen  
resolution, please refer to the manual that came with your computer or your  
operating system.  
Your monitor has a Plug and Play capability (VESA DDC1, DDC2B, DDC2Bi  
standard) that enables it to identify itself to suitably equipped HP computers.  
NOTE  
LCD technology does not cause any flicker at low refresh rates.  
1.  
The default password is 040990  
14 English  
HP 18.1” LCD Color Monitor User’s Guide  
Configuring Your Monitor  
Minimizing Energy Consumption  
If your computer supports VESA monitor power management (available on  
many HP computers), you can minimize the power consumed by the monitor.  
There are two power saving modes:  
1
Suspend mode (uses less than 5W).  
2
Sleep mode (uses less than 5W).  
When the monitor enters power saving mode the message POWER SAVING MODE  
is displayed for a few seconds before the screen blanks. In power saving mode  
the front panel indicator light is amber.  
To set these power saving modes, refer to the manual that came with your  
computer.  
1.  
2.  
Suspend mode is activated when horizontal sync is cut by the video controller.  
Sleep mode is activated when both vertical and horizontal sync are cut by the video controller.  
English 15  
HP 18.1” LCD Color Monitor User’s Guide  
Supported Video Modes  
Supported Video Modes  
Your monitor comes with the preset modes shown in the table below.  
Screen Resolution  
640x350  
Image Refresh Rate  
70 Hz  
640x480  
60 Hz, 75 Hz, 85 Hz  
70 Hz  
720x400  
800x600  
60 Hz, 75 Hz, 85 Hz  
75 Hz  
832x624  
1024x768  
1152x870  
1152x900  
1280x1024  
60 Hz, 75 Hz, 85 Hz  
75 Hz  
66 Hz  
60 Hz, 75 Hz  
NOTE  
Selecting a combination of screen resolution/image refresh rate higher than  
1280x1024 at 75 Hz can damage your monitor.  
If you select a video mode not supported by your monitor the message SIGNAL  
OUT OF RANGE is displayed.  
16 English  
HP 18.1” LCD Color Monitor User’s Guide  
Technical Specifications  
Technical Specifications  
Size  
18.1-inch diagonal and viewable image  
LIQUID CRYSTAL MONITOR  
Type  
TFT liquid crystal display  
SXGA 1280x1024 pixels (R,G,B)  
0.7 Vp p analog RGB  
Pixel pitch  
Video  
INPUT SIGNAL  
INTERFACE  
Synchronization  
Input Connector  
Separated H/V (TTL level)  
15-pin mini D-SUB  
Horizontal  
25 to 82kHz  
54 to 88Hz  
SCANNING FREQUENCY  
Vertical  
1280 ×1024 (75 Hz)  
MAX. RESOLUTION (H × V)  
359(H) x 287(V) mm  
AC/DC ADAPTER  
IMAGE SIZE  
Input Rating: 100-240V ~, 2.0-1.0A,  
Output:12V  
Frequency: 50/60 Hz  
5.8A  
POWER SOURCE  
Power Consumption: less than 60W in Operating Mode; less  
than 70W with USB  
Temperature  
Humidity  
10 °C to 35°C (operating)  
OPERATING ENVIRONMENT  
STORAGE ENVIRONMENT  
20% RH through 80% RH (without condensation)  
- 10 °C to +60 °C (storage)  
Temperature  
Humidity  
5% RH through 95% RH (without condensation)  
Cabinet: 385(H) x 436(W) x 81(D)  
Footprint: 313(W) x 245(D)  
DIMENSIONS  
With Stand: 12kg (24.25 lbs)  
Without Stand: 9.5kg(20.94lbs)  
CABINET WEIGHT  
Tilt Angle  
- 5° to +25°  
TILT/SWIVEL STAND  
Swivel Angle  
±30°  
English 17  
HP 18.1” LCD Color Monitor User’s Guide  
Care and Cleaning  
Care and Cleaning  
To maximize the screen life-span of this product and prevent damage to the  
liquid crystal display, it is recommended that you:  
Do not let liquid get on or into the monitor.  
Do not store or use the monitor in locations exposed to heat, direct sunlight,  
or extreme cold.  
Do not store or use the monitor in locations exposed to high humidity or in  
a dusty environment.  
Do not press sharp or pointed objects against the monitor.  
Avoid touching or pressing the screen of the monitor.  
Avoid setting contrast and brightness to their maximum levels for  
prolonged periods.  
Switch the monitor off when it is not in use. You can use the timer control  
to switch your monitor on and off automatically (see “Setting the Timer“ on  
page 9).  
Your monitor has an anti-glare, anti-static screen coating. To prevent damage  
to the monitor screen’s coating, use a regular household glass cleaner when  
cleaning the screen.  
To clean the screen:  
1
Switch the monitor off and remove the power plug (pull the plug, not the  
cable).  
2
Soak a soft gauze cloth with isopropyl alcohol or ethyl alcohol and gently  
wipe the surface of the monitor. Avoid dusting it or wiping it with a cloth  
dampened with water.  
3
Dry with a clean, soft cotton cloth.  
CAUTION  
Do not use cleaning solutions containing fluoride, acids, or alkalis. Do not use  
ketone substances such as acetone or solvents such as xylene or toluene to  
clean the monitor. Do not use benzene, thinner, ammonia, or any volatile  
substance to clean the monitor’s screen or cabinet. These chemicals may  
damage the monitor. Never use water to clean an LCD screen.  
18 English  
HP 18.1” LCD Color Monitor User’s Guide  
Environmental Information  
Environmental Information  
HP has a strong commitment toward the environment. Your HP monitor has  
been designed to respect the environment as much as possible.  
HP can also take back your old monitor for recycling when it reaches the end  
of its useful life.  
HP has a product take-back program in several countries. The collected  
equipment is sent to one of HP’s recycling facilities in Europe or the USA. As  
many parts as possible are reused. The remainder is recycled. Special care is  
taken for batteries and other potentially toxic substances, which are reduced  
to non-harmful components through a special chemical process. If you require  
more details about HP’s product take-back program, contact your dealer or  
your nearest HP Sales Office.  
English 19  
HP 18.1” LCD Color Monitor User’s Guide  
Warranty  
Warranty  
PART I - HP General Hardware Warranty  
General  
This HP Monitor Hardware Warranty Statement gives you, the customer, express  
warranty rights from HP, the manufacturer.  
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE  
WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT  
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN  
ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE  
OF THIS PRODUCT TO YOU.  
THE LAWS OF YOUR COUNTRY MAY PROVIDE FOR DIFFERENT WARRANTY  
RIGHTS. IF SO, YOUR AUTHORIZED HP DEALER OR HP SALES AND SERVICE  
OFFICE CAN PROVIDE YOU WITH DETAILS.  
Warranty repair or replacement  
Model  
Warranty Period  
Service provided  
Model D5065 Series  
3 years—unless original end-user  
customer has otherwise agreed to a  
shorter period of warranty at the time  
of purchase.  
On-site service for first year, and  
return to an HP or repair-authorized  
service-center for the following two  
years.  
Hewlett-Packard (HP) warrants this monitor hardware product, or accessory against  
defects in materials and workmanship for the applicable warranty period stated above,  
commencing from the date of delivery of the product to the end-user customer.  
HP does not warrant that the HP hardware will operate uninterrupted or error free.  
If, during the product warranty period, HP is unable, within a reasonable time, to repair  
or replace your product to the condition as warranted, you will be entitled to a refund  
(in the amount of the product purchase price) upon prompt return of the product to  
your authorized HP dealer or other HP designate. Unless otherwise stated or agreed  
upon in writing with HP, all hardware components must be returned for refund with  
the entire system process unit.  
HP software is covered by the HP Software Product Limited Warranty located in your  
HP product manual.  
20 English  
HP 18.1” LCD Color Monitor User’s Guide  
Warranty  
Unless otherwise stated, and to the extent permitted by local law, hardware products  
may contain remanufactured parts (equivalent to new in performance) or parts which  
may have been subject to prior incidental use. HP may repair or replace hardware  
products (i) with products which are equivalent in performance to the products being  
repaired or replaced but which may have been subject to prior use, or (ii) with  
products which may contain remanufactured parts equivalent to new in performance  
or parts which may have been subject to prior incidental use.  
Proof of Purchase and Warranty Period  
In order to receive service or support for your hardware product for the warranty  
period, proof of the original purchase date of the product may be required in order to  
establish the delivery date of your product. If the delivery date is not available, either  
the purchase date or the manufacturer's date (located on the product) becomes the  
beginning of the warranty period.  
Limitation of Warranty  
Warranty does not apply to defects resulting from: (a) improper or inadequate  
maintenance or calibration; (b) software, interfacing, parts or supplies not supplied by  
HP; (c) unauthorized repair, maintenance, modification or misuse; (d) operation  
outside of the published operating specifications for the product; (e) improper site  
preparation or maintenance; or (f) such other exclusions as may be expressly set forth  
in this Warranty Statement.  
HP MAKES NO OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL,  
WITH RESPECT TO THIS PRODUCT.  
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE  
IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY SET FORTH  
ABOVE.  
Limitation of Liability and Remedies  
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, THE REMEDIES IN  
THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. IN  
NO EVENT SHALL HP BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, INDIRECT,  
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGE, WHETHER BASED ON  
WARRANTY CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.  
The foregoing limitation of liability shall not apply in the event that any HP product  
sold hereunder is determined by a court of competent jurisdiction to be defective and  
to have directly caused bodily injury, death, or property damage. To the extent allowed  
by applicable local law, HP's liability for property damage does not exceed the greater  
of $50,000 or the purchase price of the specific product that caused such damage.  
English 21  
HP 18.1” LCD Color Monitor User’s Guide  
Warranty  
LCD Monitor Quality and Pixel Policy  
Your Hewlett-Packard TFT monitor uses high precision technology, manufactured  
according to HP standards, to guarantee trouble-free personal computing.  
Nevertheless, your monitor may have cosmetic imperfections which could appear as  
small bright or dark spots. This is common to all TFT monitors used in products  
supplied by all vendors and is not specific to the HP D5065 Series monitor.  
Please refer to the HP electronic services for more and detailed information on the  
pixel policy for the HP D5065 Series monitor.  
HP expects that, over time, the industry will continue to improve their ability to  
produce monitors with fewer cosmetic imperfections and will adjust the HP guidelines  
as improvements are made.  
PART II - HP Software Product License Agreement and Software Product  
Limited Warranty  
General  
HP may provide one or more software programs for this monitor on a separate media.  
Please read the Software License Agreement before proceeding.  
CAREFULLY READ THIS LICENSE AGREEMENT AND LIMITED WARRANTY  
STATEMENT BEFORE PROCEEDING TO OPERATE THE USE OF THE SOFTWARE.  
RIGHTS IN THE SOFTWARE ARE OFFERED ONLY ON THE CONDITION THAT THE  
CUSTOMER AGREES TO ALL TERMS AND CONDITIONS OF THE LICENSE  
AGREEMENT. PROCEEDING TO USE OF THIS SOFTWARE INDICATES YOUR  
ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE  
WITH THE TERMS OF THE LICENSE AGREEMENT, YOU MUST NOW RETURN THE  
COMPLETE MONITOR AND SOFTWARE FOR A FULL REFUND.  
PROCEEDING WITH CONFIGURATION SIGNIFIES YOUR ACCEPTANCE OF THE  
LICENSE TERMS.  
HP Software Product License Agreement  
UNLESS OTHERWISE STATED BELOW, THIS HP SOFTWARE PRODUCT LICENSE  
AGREEMENT SHALL GOVERN THE USE OF ALL SOFTWARE THAT IS PROVIDED  
TO YOU, THE CUSTOMER, AS PART OF THE HP MONITOR PRODUCT. IT SHALL  
SUPERSEDE ANY NON-HP SOFTWARE LICENSE TERMS THAT MAY BE FOUND  
ONLINE, OR IN ANY DOCUMENTATION OR OTHER MATERIALS CONTAINED IN  
THE MONITOR PRODUCT PACKAGING.  
The following License Terms govern the use of the software:  
USE Customer may use the software on any one computer. Customer may not network  
the software or otherwise use it on more than one computer. Customer may not  
reverse assemble or decompile the software unless authorized by law.  
22 English  
HP 18.1” LCD Color Monitor User’s Guide  
Warranty  
COPIES AND ADAPTATIONS Customer may make copies or adaptations of the software (a)  
for archival purposes or (b) when copying or adaptation is an essential step in the use  
of the software with a computer so long as the copies and adaptations are used in no  
other manner.  
OWNERSHIP The software is owned and copyrighted by HP or its third party suppliers.  
Customer agrees that he/she does not have any title or ownership of the software,  
other than ownership of the physical media. Customer acknowledges and agrees that  
the software is copyrighted and protected under the copyright laws. Customer  
acknowledges and agrees that the software may have been developed by a third party  
software supplier named in the copyright notices included with the software, who shall  
be authorized to hold the Customer responsible for any copyright infringement or  
violation of this Agreement.  
TRANSFER OF RIGHTS IN SOFTWARE Customer may transfer rights in the software to a third  
party only as part of the transfer of all rights and only if Customer obtains the prior  
agreement of the third party to be bound by the terms of this License Agreement. Upon  
such a transfer, Customer agrees that his/her rights in the software are terminated and  
that he/she will either destroy his/her copies and adaptations or deliver them to the  
third party.  
SUBLICENSING AND DISTRIBUTION Customer may not lease, sublicense the software or  
distribute copies or adaptations of the software to the public in physical media or by  
telecommunication without the prior written consent of Hewlett -Packard.  
TERMINATION Hewlett-Packard may terminate this software license for failure to comply  
with any of these terms provided Hewlett-Packard has requested Customer to cure the  
failure and Customer has failed to do so within thirty (30) days of such notice.  
UPDATES AND UPGRADES Customer agrees that the software does not include updates and  
upgrades which may be available from Hewlett-Packard under a separate support  
agreement.  
EXPORT CLAUSE Customer agrees not to export or re-export the software or any copy or  
adaptation in violation of the U.S. Export Administration regulations or other  
applicable regulation.  
U.S. GOVERNMENT RESTRICTED RIGHTS Use, duplication, or disclosure by the U.S.  
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the  
Rights in Technical Data and Computer Software clause in DFARS 252.227-7013.  
Hewlett-Packard Company, 3000 Hanover Street, Palo Alto, CA 94304 U.S.A. Rights for  
non-DOD U.S. Government Departments and Agencies are as set forth in FAR  
52.227-19(c)(1,2).  
English 23  
HP 18.1” LCD Color Monitor User’s Guide  
Warranty  
HP Software Product Limited Warranty  
THIS HP SOFTWARE PRODUCT LIMITED WARRANTY SHALL COVER ALL  
SOFTWARE THAT IS PROVIDED TO YOU, THE CUSTOMER, AS PART OF THE HP  
MONITOR PRODUCT. IT SHALL SUPERSEDE ANY NON-HP WARRANTY TERMS  
THAT MAY BE FOUND ONLINE, OR IN ANY DOCUMENTATION OR OTHER  
MATERIALS CONTAINED IN THE MONITOR PRODUCT PACKAGING.  
Ninety-Day Limited Software Warranty. HP warrants for a period of NINETY (90) DAYS from  
the date of the purchase that the software product will execute its programming  
instructions when all files are properly installed. HP does not warrant that the software  
will be uninterrupted or error free. In the event that this software product fails to  
execute its programming instructions during the warranty period, Customer' s remedy  
shall be a refund or repair. Should HP be unable to replace the media within a  
reasonable amount of time, Customer's alternate remedy shall be a refund of the  
purchase price upon return of the product and all copies.  
Removable Media (If supplied) HP warrants the removable media, if supplied, upon which  
this product is recorded to be free from defects in materials and workmanship under  
normal use for a period of NINETY (90) DAYS from the date of purchase. In the event  
the media proves to be defective during the warranty period, Customer's remedy shall  
be to return the media to HP for replacement. Should HP be unable to replace the  
media within a reasonable amount of time, Customer's alternate remedy shall be a  
refund of the purchase price upon return of the product and destruction of all other  
non-removable media copies of the software product.  
NOTICE OF WARRANTY CLAIMS Customer must notify HP in writing of any warranty claim  
not later than thirty (30) days after the expiration of the warranty period.  
LIMITATION OF WARRANTY HP makes no other express warranty, whether written or oral  
with respect to this product. Any implied warranty of merchantability or fitness for a  
particular purpose is limited to the 90-day duration of this written warranty. Some  
states or provinces do not allow limitations on how long an implied warranty lasts, so  
the above limitation or exclusion may not apply to you. This warranty gives specific  
legal rights, and you may also have other rights which vary from state to state, or  
province to province.  
LIMITATION OF LIABILITY AND REMEDIES THE REMEDIES PROVIDED ABOVE ARE  
CUSTOMER'S SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL HP BE  
LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFIT) WHETHER BASED ON  
WARRANTY, CONTRACT, TORT OR ANY OTHER LEGAL THEORY. Some states or  
provinces do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitation or exclusion may not apply to you.  
24 English  
HP 18.1” LCD Color Monitor User’s Guide  
Warranty  
OBTAINING WARRANTY SERVICE Warranty service may be obtained from the nearest HP  
sales office or other location indicated in the owner's manual or service booklet.  
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE  
WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT  
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY BUT ARE IN  
ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE  
OF THIS PRODUCT TO YOU.  
PART III - Year 2000 Warranty  
Subject to all of the terms and limitations of the HP Limited Warranty Statement  
provided with this HP Product, HP warrants that this HP Product will be able to  
accurately process date data (including, but not limited to, calculating, comparing, and  
sequencing) from, into, and between the twentieth and twenty-first centuries, and the  
years 1999 and 2000, including leap year calculations, when used in accordance with  
the Product documentation provided by HP (including any instructions for installing  
patches or upgrades), provided that all other products (e.g. hardware, software,  
firmware) used in combination with such HP Product(s) properly exchange date data  
with it. The duration of the Year 2000 warranty extends through January 31, 2001.  
English 25  
HP 18.1” LCD Color Monitor User’s Guide  
Regulatory Information  
Regulatory Information  
DECLARATION OF CONFORMITY  
according to ISO/IEC Guide 22 and EN 45014  
Manufacturer’s Name:  
HEWLETT-PACKARD France  
Manufacturer’s Address:  
5, Avenue Raymond Chanas - EYBENS  
38053 GRENOBLE CEDEX 09 - FRANCE  
Declares, that the product:  
HP L1800 18.1-inch LCD Color Monitor  
D5065* Series  
Product Name:  
Model Number:  
Conforms to the following Product Specifications:  
SAFETY International: IEC 60950:1991 + A1 + A2 +A3 +A4  
Europe: EN 60950:1992 + A1 + A2 +A3 +A4  
EMC CISPR 22:1993+A1 +A2/ EN 55022:1994+ A1 + A2- Class B 1)  
EN 50082-1:1992  
IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD  
IEC 801-3:1984- 3V/m  
IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power Lines  
IEC 555-2:1982 + A1:1985 / EN 60555-2:1987  
IEC 1000-3-3:1994 / EN 61000-3-3:1995  
- FCC Title 47 CFR, Part 15 Class B2  
- ICES-003, Issue 2  
- VCCI-B  
- AS/NZ 3548:1992  
Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE mark accordingly:  
EMC Directive 89/336/EEC, the Low Voltage Directive 73/23/EEC both amended by the Directive 93/68/EEC.  
1)The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.  
2)This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:  
1)This device may not cause harmful interference and  
2)This device must accept any interference received, including interference that may cause undesired operation.  
* Denotes alphabetic character for additional features.  
Jean Marc JULIA  
Quality Manager  
Grenoble, February 1999.  
For Compliance Information ONLY, contact: USA contact: Hewlett Packard Company Corporate Product Regulations Manager 3000 Hanover Street,Palo  
Alto, CA 94304. (Phone (415) 857-1501)  
26 English  
HP 18.1” LCD Color Monitor User’s Guide  
Regulatory Information  
Notice for the USA: FCC Statement  
Federal Communications Commission (FCC) Radio  
Frequency Interference Statement (USA Only)  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in  
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Hewlett-Packard’s FCC Compliance Tests were conducted with HP-supported peripheral devices and HP  
shielded cables, such as those you receive with your system. Cables used with this computer must be properly  
shielded to comply with the requirements of FCC.  
Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate  
the equipment.  
Notice for Canada  
This Class “B” digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.  
General Notice  
The HP D5065 Series 18.1-inch LCD Color Monitor has been tested according to MPR 1990:8 for Emission  
properties and meets the guidelines as given by MPR 1990:10 (2.01 - 2.04).  
English 27  
HP 18.1” LCD Color Monitor User’s Guide  
Regulatory Information  
Notice for Japan  
28 English  
HP 18.1” LCD Color Monitor User’s Guide  
TCO 99 - Ecology Energy Emissions Ergonomics  
TCO 99 - Ecology Energy Emissions Ergonomics  
Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided  
you with a product developed for professional use. Your purchase has also contributed to reducing the burden  
on the environment and also to the further development of environmentally adapted electronics products.  
Why do we have environmentally labelled computers?  
In many countries, environmental labelling has become an established method for encouraging the adaptation of  
goods and services to the environment. The main problem, as far as computers and other electronics equipment  
are concerned, is that environmentally harmful substances are used both in the products and during their  
manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most  
of these potentially damaging substances sooner or later enter nature.  
There are also other characteristics of a computer, such as energy consumption levels, that are important from  
the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity  
generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive  
waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby  
consumes a lot of energy.  
What does labelling involve?  
This product meets the requirements for the TCO'99 scheme which provides for international and  
environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO  
(The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish  
Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).  
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric  
and magnetic fields, energy consumption and electrical and fire safety.  
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and  
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be  
prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered  
to in each country where the company implements its operational policy.  
The energy requirements include a demand that the computer and/or monitor, after a certain period of  
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to  
reactivate the computer shall be reasonable for the user.  
Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric  
and magnetic fields, physical and visual ergonomics and good usability.  
Below you will find a brief summary of the environmental requirements met by this product. The complete  
environmental criteria document may be ordered from:  
TCO Development  
SE-114 94 Stockholm, Sweden  
Fax: +46 8 782 92 07  
Email (Internet): [email protected]  
Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet,  
using the address:  
English 29  
HP 18.1” LCD Color Monitor User’s Guide  
TCO 99 - Ecology Energy Emissions Ergonomics  
Environmental requirements  
Flame retardants  
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to  
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame  
retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are  
chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing  
bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive  
damage in fish-eating birds and mammals, due to the bio-accumulative1 processes. Flame retardants have been  
found in human blood and researchers fear that disturbances in foetus development may occur.  
The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain  
flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit  
boards since no substitutes are available.  
Cadmium2  
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer monitors.  
Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that  
batteries, the colour-generating layers of monitor screens and the electrical or electronics components must not  
contain any cadmium.  
Mercury2.  
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high  
doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands  
that mercury is not present in any of the electrical or electronics components associated with the labelled unit.  
CFCs (freons)  
The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and  
assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break  
down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of  
ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.  
Lead2.  
Lead can be found in picture tubes, monitor screens, solders and capacitors. Lead damages the nervous system  
and in higher doses, causes lead poisoning. The relevant TCO´99 requirement permits the inclusion of lead since  
no replacement has yet been developed.  
1.  
2.  
Bio-accumulative is defined as substances which accommodate within living organisms.  
Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative  
30 English  
Paper not bleached with chlorine  
Part Number : 5969-1980  
Printed 07/99 in  

Gateway FPD1976W User Manual
Fujitsu M5000 CL10 PI01 User Manual
Fisher Paykel Cooktop CE365D User Manual
Diamond Multimedia Radeon X1650AGP512 User Manual
Casio CS 53P User Manual
BT Calypso 120 User Manual
Avocent AutoView 424 User Manual
Asus SOCKET 370 MOTHERBOARD CUA266 User Manual
American Dynamics AD9517B User Manual
Abit NF7 S User Manual