HP Hewlett Packard Compaq TFT 1825 User Manual

User’s Guide  
1825 Flat Panel Monitor  
Document Part Number: 305223-001  
August 2002  
Product Features  
The 1825 Flat Panel Display has an active matrix, thin-film  
transistor (TFT), liquid crystal display (LCD). The monitor  
features include:  
Large 18.1-inch (45.9 cm) viewable area display.  
1280 × 1024 native resolution, plus full-screen support for  
lower resolutions.  
Wide viewing angle to allow viewing from a sitting or  
standing position, or moving side-to-side.  
Tilt and swivel adjustment capabilities.  
Removable base for flexible mounting solutions.  
Multiple video inputs supported:  
VGA Analog  
DVI-I supports either Analog or Digital signal input  
VGA analog and DVI-Digital signal cables included.  
Plug and play capability if supported by your system.  
On-Screen Display (OSD) adjustments in English, French,  
German, Italian, Spanish, and Simplified Chinese for ease of  
set-up and screen optimization.  
Software and Reference Library CD includes an information  
file (INF), Image Color Matching file (ICM), and product  
documentation.  
Energy Saver feature for Energy Star compliance.  
AssetControl  
Compliant with the following regulated specifications:  
EPA ENERGY STAR  
European Union CE Directives  
User’s Guide  
1
Swedish MPR II 1990  
Swedish TCO '99  
Installing the Information Files  
The CD-ROM included with this monitor contains two  
information files to be installed onto your computer; an .INF file  
and an .ICM file.  
The .INF file defines monitor resources and provides  
specifications used by most operating systems to install  
support software for certain hardware devices. The .INF file  
ensures monitor compatibility and optimization with your  
computer’s graphics adapter. INF files are downloadable by  
clicking on: www.hp.com/go/support and selecting the desired  
monitor.  
The .ICM file provides color matching consistency from  
monitor screen to printer and is activated from within  
graphics programs that have this feature.  
To install these files on your computer, insert the Software and  
Reference Library CD in your computer CD-ROM drive. When  
the CD menu launches, select Install INF and ICM Files and  
follow the on-screen instructions.  
Setting Up the Monitor  
To set up the monitor, ensure that the power is turned off to the  
monitor, computer system, and other attached devices, then  
follow these steps:  
1. Place the monitor in a convenient, well-ventilated location  
near your computer.  
2. Connect the monitor signal cable to the video connector on  
the rear panel of the computer.  
2
User’s Guide  
The DVI-D cable supplied with this monitor is for digital-  
to-digital connection only. Your computer must have a  
DVI-compatible graphics card installed for use with this cable.  
When connecting the DVI-D signal cable to the DVI connector  
on the monitor, you must connect the other end of the DVI-D  
cable to the DVI connector on the computer.  
3. Connect the monitor signal cable to the back of the monitor.  
4. Connect the power cable to the back of the monitor.  
5. Connect the power cable to an electrical wall outlet.  
User’s Guide  
3
6. Adjust the monitor as needed for your comfort using the  
monitor’s tilt, swivel, and height adjustment capabilities.  
You can change your monitor’s viewing position to portrait. To  
rotate your display to the portrait position, you will need to install  
the Pivot software, which is contained on the CD included with  
your monitor.  
4
User’s Guide  
User’s Guide  
5
ÅWARNING: To reduce the risk of electric shock or damage to your  
equipment: Do not disable the power cord grounding plug. The  
grounding plug is an important safety feature.  
Plug the power cord into a grounded (earthed) electrical outlet that is  
easily accessible at all times.  
Disconnect power from the monitor by unplugging the power cord  
from the electrical outlet.  
Do not place anything on power cords or cables. Arrange them so  
that no one may accidentally step on or trip over them. Do not pull on  
a cord or cable. When unplugging from the electrical outlet, grasp  
the cord by the plug.  
ÄCAUTION: Burn-in image damage may occur on monitors that  
display the same static image on screen for a prolonged period of  
time. To avoid burn-in image damage on your monitor screen, you  
should always activate a screen saver application or turn off the  
monitor when it is not in use for a prolonged period of time.  
Selecting the Signal Connectors and Cables  
There are two signal input connectors: one VGA connector and  
one DVI-I connector. The monitor will automatically determine  
which inputs have valid video signals. The inputs can be selected  
via the On-Screen Display (OSD) feature or by pressing the  
Signal Input Selection control on the monitor front bezel.  
The video mode supported by the DVI-I connector is determined  
by the video cable used. For digital operation, use the DVI-D to  
DVI-D signal cable provided. For analog operation, a DVI-I to  
VGA signal cable must be attached to the DVI-I input (not  
provided with the monitor).  
6
User’s Guide  
Removing the Monitor Base  
You can remove the monitor base to mount the monitor on a wall,  
a swing arm or other mounting fixture. To remove the monitor  
from the base, read the caution and warning below before  
beginning the procedure.  
ÄCAUTION: Before beginning to disassemble the monitor, be sure  
the monitor is turned off and the power and signal cables are both  
disconnected.  
Lay the front bezel down on a soft area to prevent it from getting  
scratched, defaced, or broken  
ÅWARNING: Do not remove the base from the monitor while the  
monitor is in the upright position. Before removing the monitor from  
the base, ensure that the monitor is lying flat, front bezel down, and  
that the base is set to the maximum base extension. Attempting to  
remove the monitor from the base while upright in the minimum base  
extension may result in injury to the user.  
1. Disconnect and remove the signal and power cables from the  
back of the monitor.  
User’s Guide  
7
2. Remove the four screws as shown in the following  
illustration.  
ÄCAUTION: Ensure that the bottom of the monitor base is positioned  
over a table or desktop before removing the base from the monitor.  
3. Remove the monitor base from the monitor.  
Mounting the Monitor  
1. Remove the monitor base. Refer to “Removing the Monitor  
Base” steps in the previous section.  
When the base is removed, four threaded mounting holes are  
exposed on the monitor panel to be used for mounting purposes.  
These mounting holes are spaced 100 mm apart and are  
compliant with the Video Electronics Standards Association  
(VESA) standard for mounting flat panel displays.  
8
User’s Guide  
2. Mount the monitor to a swing arm or other mounting fixture  
by following the instructions included with the mounting  
fixture to be used.  
Operating the Monitor  
Front Panel Controls  
No.  
Control  
Function  
1
Auto button  
Automatically adjusts the  
displayed image  
2
3
Input button  
Allows you to switch to and from  
the VGA and DVI-I video signal  
inputs when the OSD is off.  
Menu  
Navigates through the OSD  
option icons and adjusts settings.  
User’s Guide  
9
Front Panel Controls  
Control Function  
Brightness  
No.  
4
• Adjust brightness up and  
down (when the OSD is off).  
• Use the up and down buttons  
to navigate through the OSD  
menus when the OSD is on.  
5
6
Power LED  
Illuminates green when the  
monitor is on and turns amber  
when the monitor is in a power  
saver mode.  
Power Switch  
Turns the monitor on and off  
10  
User’s Guide  
On-Screen Display Settings  
The adjustments for screen settings are located in the on-screen  
display (OSD). Press the menu button on the monitor's front panel  
to view the OSD menu in one of seven available languages. The  
following table shows the menus and their functions at each level:  
OSD Menu Levels  
Menu Level Menu Level Menu Level Menu Level  
1
2
Horizontal  
Vertical  
3
4
Adjust Position  
Brightness &  
Contrast  
Brightness  
Contrast  
Phase  
Video Noise  
Adjust Color  
Clock  
Original Panel  
Color  
9300K for  
CAD/CAM  
6500K for  
Image  
Management  
User Preset  
Red  
Green  
Blue  
OSD Settings  
Horizontal  
Vertical  
Product  
Serial No.  
Information  
Resolution  
User’s Guide  
11  
OSD Menu Levels  
Menu Level Menu Level Menu Level Menu Level  
1
2
Video Input  
No  
3
4
Reset to Factory  
Setting  
Yes  
Input Selection  
Analog (D-Sub)  
Digital (DVI)  
Analog (DVI)  
Exit Main  
Controls  
The Video Noise OSD selection is not available when the monitor  
is operating in the DVI-D (digital) mode.  
Adjusting Monitor Settings  
On the front panel controls of your monitor, once you press the  
menu button, the On Screen Display (OSD) Main Controls  
window will pop up and you can now start making adjustments to  
your monitor’s various features. Use the left, right, up, and down  
arrow keys in the menu window to make your adjustments.  
12  
User’s Guide  
Adjusting Screen Quality  
Allow the monitor to warm up for 20 minutes before performing  
the following procedures.  
The Auto Adjustment feature automatically fine-tunes the image  
quality each time a new video mode is utilized. If additional  
improvement is desired, select the Auto Adjust control on the  
front bezel.  
For more precise adjustments, use the adjustment pattern  
provided on the CD-ROM, and adjust the clock and phase  
settings (accessed from the OSD menu) as described in the  
following section.  
User’s Guide  
13  
Optimizing Digital Conversion  
This monitor contains advanced circuitry that allows the flat  
panel screen to function like a standard monitor. Two controls in  
the on-screen display can be adjusted to improve image  
performance: Clock and Clock Phase. Use these controls only  
when the auto adjust function does not provide a satisfactory  
image.  
The Clock must first be set correctly since the Clock Phase  
settings are dependent on the main Clock setting.  
Clock—Increase/decrease the value to minimize any vertical  
bars or stripes visible on the screen background.  
Clock Phase—Increase/decrease the value to minimize video  
distortion or video jitter.  
When using the controls, you will obtain the best results by using  
the adjustment pattern application provided on the CD-ROM.  
When adjusting the Clock and Clock Phase values, if the monitor  
images become distorted, continue adjusting the values until the  
distortion disappears. To restore the factory settings, select Yes  
from the Factory Reset menu in the on-screen display.  
Recognizing Preset Display Resolutions  
The display resolutions listed below are the most commonly used  
modes and are set as factory defaults. This monitor automatically  
recognizes these preset modes and they will appear properly sized  
and centered on the screen.  
14  
User’s Guide  
Factory Preset Display Modes  
Preset  
1
Pixel Format  
640 x 350  
720 x 400  
640 x 480  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
Horz Freq (kHz)  
31.5  
Vert Freq (Hz)  
70.0  
2
31.5  
70.0  
3
31.5  
60.0  
4
37.9  
72.0  
5
37.5  
75.0  
6
35.2  
56.0  
7
37.9  
60.0  
8
46.9  
75.0  
9
49.7  
75.0  
10  
11  
12  
13  
14  
15  
1024 x 768  
1024 x 768  
1152 x 870  
1280 x 1024  
1280 x 1024  
1600 x 1200  
48.4  
60.0  
60.0  
75.0  
69.0  
75.0  
63.9  
60.0  
80.0  
75.0  
75.0  
60.0  
Entering User Modes  
The video controller signal may occasionally call for a mode that  
is not preset if:  
You are not using a standard graphics adapter.  
You are not using a preset mode.  
If this occurs, you may need to readjust the parameters of the  
monitor screen by using the on-screen display. Your changes can  
be made to any or all of these modes and saved in memory. The  
monitor automatically stores the new setting, then recognizes the  
User’s Guide  
15  
new mode just as it does a preset mode. In addition to the 15  
factory preset modes, there are four user modes that can be  
entered and stored.  
Energy Saver Feature  
When the monitor is in its normal operating mode, the monitor  
uses less than 60 watts of power and the Power light is green.  
The monitor also supports a reduced power state. The reduced  
power state will be entered into if the monitor detects the absence  
of either the horizontal sync signal and/or the vertical sync signal.  
Upon detecting the absence of these signals, the monitor screen is  
blanked, the backlight is turned off, and the Power light is turned  
amber. When the monitor is in the reduced power state, the  
monitor will utilize less than 5 watts of power. There is a brief  
warm up period before the monitor will return to its normal  
operating mode.  
Refer to your computer manual for instructions on setting energy  
saver features (sometimes called power management features).  
The above energy saver feature only works when connected to  
computers that have energy saver features.  
By selecting settings in the monitor’s Energy Saver utility, you  
can also program the monitor to enter into the reduced power  
state at a predetermined time. When the monitor’s Energy Saver  
utility causes the monitor to enter the reduced power state, the  
Power light blinks amber.  
Care and Maintenance  
Use the following guidelines to care for and maintain your  
monitor during normal everyday use.  
16  
User’s Guide  
Protecting the Monitor  
To protect your monitor from overheating and other types of  
damage:  
Use only a power source and connection appropriate for this  
monitor, as indicated on the marking label/back plate and the  
AC adapter.  
If an extension cord or power strip is used, make sure that the  
cord or strip is rated for the product and that the total ampere  
ratings of all products plugged into the extension cord or  
power strip do not exceed 80% of the extension cord or strip  
ampere ratings limit.  
Do not overload an electrical outlet, power strip, or  
convenience receptacle. The overall system load must not  
exceed 80% of the branch circuit rating. If power strips are  
used, the load should not exceed 80% of the power strip input  
rating.  
Install the monitor near an outlet that you can easily reach.  
Disconnect the product by grasping the plug firmly and  
pulling it from the outlet. Never disconnect it by pulling the  
cord.  
Unplug the monitor from the wall outlet before cleaning. Do  
not use liquid cleaners or aerosol cleaners.  
Slots and openings in the cabinet are provided for ventilation.  
These openings must not be blocked or covered. Never push  
objects of any kind into cabinet slots or other openings.  
Do not drop the monitor or place it on an unstable surface.  
Do not allow anything to rest on the power cord. Do not walk  
on the cord.  
User’s Guide  
17  
Keep the monitor in a well-ventilated area, away from  
excessive light, heat, and moisture. Keep the monitor away  
from high capacity transformers, electric motors, and other  
strong magnetic fields.  
Do not open the monitor cabinet or attempt to service this  
product yourself. Adjust only those controls that are covered  
by the operating instructions. If the monitor is not operating  
properly or has been dropped or damaged, contact your  
authorized dealer, reseller, or service provider.  
Cleaning the Monitor  
To clean the monitor, follow these steps:  
1. Turn off the monitor and the computer.  
2. Dust the monitor by wiping the screen and the cabinet with a  
soft, clean cloth.  
If the screen requires additional cleaning, use a clean cloth  
dampened with isopropyl alcohol.  
CAUTION: Do not use benzene, thinner, ammonia, or any volatile  
Ä
substance to clean the monitor screen or cabinet. These chemicals  
may damage the monitor. Never use water to clean an LCD screen.  
Shipping the Monitor  
Keep the original packing box in a storage area. You may need it  
later if you move or ship your monitor.  
18  
User’s Guide  
Specifications  
1825 Flat Panel Monitor  
Display  
Type  
18.1 inches  
TFT LCD  
46 cm  
46 cm  
Viewable Image Size  
18.1-inch  
diagonal  
o
Tilt  
-5 to 35  
o
Swivel  
+35 to - 35  
Face Treatment  
Anti-glare  
polarizer with  
hard coating  
Maximum Weight  
(Unpacked)  
22.9 lbs.  
10.4 kg  
(unpacked)  
Dimensions  
(includes pedestal)  
Height  
Depth  
Width  
19.9 inches  
8.2 inches  
15.8 inches  
506 mm  
208 mm  
402 mm  
Graphics Resolutions  
1280 x 1024 (75 Hz) analog and  
digital modes  
1600 x 1200 (60 Hz) analog mode  
only  
Text Mode  
Dot Pitch  
720 x 400  
0.279 x 0.279  
mm  
Horizontal Frequency  
(analog mode)  
30 to 82 kHz  
56 to 76 Hz  
Vertical Refresh Rate  
(analog mode)  
User’s Guide  
19  
1825 Flat Panel Monitor  
Environmental Requirements  
Temperature  
o
o
32to 95 F  
0 to 35 C  
Operating Temperature  
Non-operating Temperature  
o
o
-4 to 140 F  
-20 to +60 C  
Relative Humidity  
Power Source  
20 to 80%  
100 - 240 VAC,  
50/60 Hz  
Power Consumption  
Input Terminals  
<60 watts typical  
15-pin D-type connector with cable  
included.  
DVI-I connector with DVI-D cable  
included  
Color Display Values  
CIE* Chromaticity Coordinates  
x (+/- 0.030)  
0.63  
y (+/- 0.030)  
0.34  
Red  
Blue  
0.141  
0.295  
0.096  
Green  
0.600  
White Chromaticity (6500 K) 0.31  
0.329  
0.31  
(9300 K)  
0.28  
Gamma: 2.2  
* Commission International d’Eclairage, 1931 Standard.  
20  
User’s Guide  
Agency Regulatory Notices  
Federal Communications Commission  
Notice  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio or television  
technician for help.  
User’s Guide  
21  
Agency Regulatory Notices  
Modifications  
The FCC requires the user to be notified that any changes or  
modifications made to this device that are not expressly approved  
by Compaq Computer Corporation may void the user's authority  
to operate the equipment.  
Cables  
Connections to this device must be made with shielded cables  
with metallic RFI/EMI connector hoods to maintain compliance  
with FCC Rules and Regulations.  
Declaration of Conformity for Products  
Marked with FCC Logo, United States  
Only  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not  
cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause  
undesired operation.  
For questions regarding your product, contact:  
Compaq Computer Corporation  
P. O. Box 692000, Mail Stop 530113  
Houston, Texas 77269-2000  
Or, call - 1-800- 652-6672 (1-800-OK COMPAQ)  
For questions regarding this FCC declaration, contact:  
Compaq Computer Corporation  
P. O. Box 692000, Mail Stop 510101  
Houston, Texas 77269-2000  
Or, call - (281) 514-3333  
22  
User’s Guide  
Agency Regulatory Notices  
To identify this product, refer to the Part, Series, or Model  
number found on the product.  
Canadian Notice  
This Class B digital apparatus meets all requirements of the  
Canadian Interference-Causing Equipment Regulations.  
Avis Canadien  
Cet appareil numérique de la classe B respecte toutes les  
exigences du Règlement sur le matériel brouilleur du Canada.  
European Notice  
Products with the CE Marking comply with both the EMC  
Directive (89/336/EEC) and the Low Voltage Directive  
(73/23/EEC) issued by the Commission of the European  
Community.  
Compliance with these directives implies conformity to the  
following European Norms (in brackets are the equivalent  
international standards):  
EN55022 (CISPR 22) - Electromagnetic Interference  
EN55024 (IEC61000-4-2,3,4,5,6,8,11) - Electromagnetic  
Immunity  
EN61000-3-2 (IEC61000-3-2) – Power Line Harmonics  
EN61000-3-3 (IEC61000-3-3) – Power Line Flicker  
EN60950 (IEC950) - Product Safety  
User’s Guide  
23  
Agency Regulatory Notices  
Japanese Notice  
EPA Energy Star Compliance  
Monitors that are marked with the Energy Star Logo meet the  
requirements of the EPA Energy Star program. As an Energy Star  
Partner, Compaq Computer Corporation has determined that this  
product meets the Energy Star guidelines for energy efficiency.  
Specific details on using the Energy Saving features can be found  
in the energy saver or power management section of the computer  
manual.  
24  
User’s Guide  
Agency Regulatory Notices  
TCO ‘99  
Congratulations!  
You have just purchased a TCO'99 approved and labelled  
product! Your choice has provided you with a product developed  
for professional use. Your purchase has also contributed to  
reducing the burden on the environment and also to the further  
development of environmentally adapted electronics products.  
Why do we have environmentally labelled  
computers?  
In many countries, environmental labelling has become an  
established method for encouraging the adaptation of goods and  
services to the environment. The main problem, as far as  
computers and other electronics equipment are concerned, is that  
environmentally harmful substances are used both in the products  
and during their manufacture. Since it is not so far possible to  
satisfactorily recycle the majority of electronics equipment, most  
of these potentially damaging substances sooner or later enter  
nature.  
There are also other characteristics of a computer, such as energy  
consumption levels, that are important from the viewpoints of  
both the work (internal) and natural (external) environments.  
User’s Guide  
25  
Agency Regulatory Notices  
Since all methods of electricity generation have a negative effect  
on the environment (e.g. acidic and climate-influencing  
emissions, radioactive waste), it is vital to save energy.  
Electronics equipment in offices is often left running  
continuously and thereby consumes a lot of energy.  
What does labelling involve?  
This product meets the requirements for the TCO'99 scheme  
which provides for international and environmental labelling of  
personal computers. The labelling scheme was developed as a  
joint effort by the TCO (The Swedish Confederation of  
Professional Employees), Svenska Naturskyddsforeningen (The  
Swedish Society for Nature Conservation) and Statens  
Energimyndighet (The Swedish National Energy  
Administration).  
Approval requirements cover a wide range of issues:  
environment, ergonomics, usability, emission of electric and  
magnetic fields, energy consumption and electrical and fire  
safety.  
The environmental demands impose restrictions on the presence  
and use of heavy metals, brominated and chlorinated flame  
retardants, CFCs (freons) and chlorinated solvents, among other  
things. The product must be prepared for recycling and the  
manufacturer is obliged to have an environmental policy which  
must be adhered to in each country where the company  
implements its operational policy.  
The energy requirements include a demand that the computer  
and/or display, after a certain period of inactivity, shall reduce its  
power consumption to a lower level in one or more stages. The  
length of time to reactivate the computer shall be reasonable for  
the user.  
26  
User’s Guide  
Agency Regulatory Notices  
Labelled products must meet strict environmental demands, for  
example, in respect of the reduction of electric and magnetic  
fields, physical and visual ergonomics and good usability.  
Below you will find a brief summary of the environmental  
requirements met by this product. The complete environmental  
criteria document may be ordered from:  
TCO Development  
SE-114 94 Stockholm, Sweden  
Fax: +46 8 782 92 07  
Email (Internet): [email protected]  
Current information regarding TCO'99 approved and labelled  
products may also be obtained via the Internet, using the address:  
Environmental requirements  
Flame retardants  
Flame retardants are present in printed circuit boards, cables,  
wires, casings and housings. Their purpose is to prevent, or at  
least to delay the spread of fire. Up to 30% of the plastic in a  
computer casing can consist of flame retardant substances. Most  
flame retardants contain bromine or chloride, and those flame  
retardants are chemically related to another group of  
environmental toxins, PCBs. Both the flame retardants containing  
bromine or chloride and the PCBs are suspected of giving rise to  
severe health effects, including reproductive damage in  
fish-eating birds and mammals, due to the bioaccumulative*  
processes. Flame retardants have been found in human blood and  
researchers fear that disturbances in foetus development may  
occur.  
User’s Guide  
27  
Agency Regulatory Notices  
The relevant TCO'99 demand requires that plastic components  
weighing more than 25 grams must not contain flame retardants  
with organically bound bromine or chlorine. Flame retardants are  
allowed in the printed circuit boards since no substitutes are  
available.  
Cadmium**  
Cadmium is present in rechargeable batteries and in the  
colour-generating layers of certain computer displays. Cadmium  
damages the nervous system and is toxic in high doses. The  
relevant TCO'99 requirement states that batteries, the  
colour-generating layers of display screens and the electrical or  
electronics components must not contain any cadmium.  
Mercury**  
Mercury is sometimes found in batteries, relays and switches. It  
damages the nervous system and is toxic in high doses. The  
relevant TCO'99 requirement states that batteries may not contain  
any mercury. It also demands that mercury is not present in any of  
the electrical or electronics components associated with the  
labelled unit. There is however one exception. Mercury is, for the  
time being, permitted in the back light system of flat panel  
monitors as there today is no commercially available alternative.  
TCO aims on removing this exception when a mercury free  
alternative is available.  
CFCs (freons)  
The relevant TCO'99 requirement states that neither CFCs nor  
HCFCs may be used during the manufacture and assembly of the  
product. CFCs (freons) are sometimes used for washing printed  
circuit boards. CFCs break down ozone and thereby damage the  
ozone layer in the stratosphere, causing increased reception on  
earth of ultraviolet light with e.g. increased risks of skin cancer  
(malignant melanoma) as a consequence.  
28  
User’s Guide  
Agency Regulatory Notices  
Lead**  
Lead can be found in picture tubes, display screens, solders and  
capacitors. Lead damages the nervous system and in higher  
doses, causes lead poisoning. The relevant TCO´99 requirement  
permits the inclusion of lead since no replacement has yet been  
developed.  
*Bioaccumulative is defined as substances which accumulate  
within living organisms.  
**Lead, Cadmium and Mercury are heavy metals that are  
Bioaccumulative.  
Power Cord Set Requirements  
The monitor power supply is provided with Automatic Line  
Switching (ALS). This feature allows the monitor to operate on  
input voltages between 100-120V or 200-240V.  
The power cord set (flexible cord or wall plug) received with the  
monitor meets the requirements for use in the country where you  
purchased the equipment.  
If you need to obtain a power cord for a different country, you  
should purchase a power cord that is approved for use in that  
country.  
The power cord must be rated for the product and for the voltage  
and current marked on the product's electrical ratings label. The  
voltage and current rating of the cord should be greater than the  
voltage and current rating marked on the product. In addition, the  
cross-sectional area of the wire must be a minimum of 0.75 mm²  
or 18AWG, and the length of the cord must be between 6 feet (1.8  
m) and 12 feet (3.6 m). If you have questions about the type of  
power cord to use, contact your Compaq authorized service  
provider.  
User’s Guide  
29  
Agency Regulatory Notices  
A power cord should be routed so that it is not likely to be walked  
on or pinched by items placed upon it or against it. Particular  
attention should be paid to the plug, electrical outlet, and the  
point where the cord exits from the product.  
30  
User’s Guide  

Electrolux SG 340 User Manual
Electrolux Libero Line 601595 User Manual
Electrolux EM 4 58 D User Manual
Eizo S2031W User Manual
Diamond Multimedia XtremeSound 7 1DDL XS71DDL User Manual
Daewoo DTQ 25S5FC User Manual
Asus CUV4X CME User Manual
Apple 20Display User Manual
AOC LM742 User Manual
3M MicroTouch M170 User Manual