22”
Liquid Crystal Display
Monitor
2438501293P
REGULATORY INFORMATION
Before operating the monitor, please read this manual thoroughly. This manual
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
energy and, if not installed and used in accordance with the instructions, may
equipment does cause harmful interference to radio or television reception,
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
•
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
CANADA
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.
This device complies with requirement of EMC directive
89/336/EEC with regard to Electromagnetic Compatibility, and
73/23/EEC and 93/68/EEC with regard to Low Voltage directive.
Socket-outlet shall be near the equipment and shall be accessible.
1
RECYCLING INFORMATION
HANNspree Inc. cares about environmental protection strategies and in using
manufacturing methods and treatments that lend themselves to conservation
and recycling devices at the end-of-life.
Our products, whenever possible, contain recyclable materials which can be
recycled into new devices. When necessary for operation, other materials may
be classified as hazardous or poisonous substances. We strongly encourage
you to research the provided information about recycling this device.
For more information, please visit
2
SAFETY NOTICE
1. Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order
to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. It is the
responsibilities of the user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture.
Dangerously high voltages are present inside the monitor. Do not open the
cabinet. For all service issues, please refer to qualified personnel only.
PRECAUTIONS
•
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen
sink, laundry tub, swimming pool or in a wet basement.
•
Do not place the monitor on an unstable cart, stand, or table. If the monitor
falls, it can injure a person and cause serious damage to the appliance. Use
only a cart or stand recommended by the manufacturer or sold with the
monitor. If you mount the monitor on a wall or shelf, use a mounting kit
approved by the manufacturer and follow the kit instructions.
•
Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of the monitor and to protect it from
overheating, be sure these openings are not blocked or covered. Do not
place the monitor on a bed, sofa, rug, or similar surface. Do not place the
monitor near or over a radiator or heat register. Do not place the monitor in a
bookcase or cabinet unless proper ventilation is provided.
•
•
•
The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.
Unplug the unit during a lightening storm or when it will not be used for long
period of time. This will protect the monitor from damage due to power
surges.
Do not overload power strips and extension cords. Overloading can result in
fire and / or electric shock.
3
•
•
•
Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
Do not attempt to service the monitor by yourself; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all service issues to qualified service personnel.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100 - 240V AC, Min. 5A.
•
The wall socket shall be installed near the equipment and shall be easily
accessible.
•
Do not install the monitor in a location near heat sources such as
radiators or air dusts, or in a place subject to direct sunlight, or
excessive dust or mechanical vibration or shock.
•
•
•
Save the original carton and packing materials, as they will come in
handy if you ever have to ship your monitor.
To ensure problem-free shipping, pack your monitor in the same
packing materials and carton as it was shipped from the factory.
To keep the monitor looking new, periodically clean it with a soft
cloth. Stubborn stains may be removed with a cloth lightly dampened
with a mild detergent solution. Never use strong solvents such as
paint thinners, benzene, or abrasive cleaning products. These and
other harsh cleaning agents will damage the cabinet of the monitor.
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a
problem.
•
Due to the nature of the fluorescent light, the screen may flicker during initial
use. Turn off the Power Switch and then turn it on again to make sure the
flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the
time.
4
•
•
Due to the nature of LCD screens, an after image of the previous displayed
content may remain if this image has been the displayed for several hours.
The LCD screen should recover if the image is changed or powered off for
several hours.
If the screen suddenly flashes erratically or the backlighting fails, please
contact your dealer or service center for repair. Do not attempt to repair the
monitor yourself.
5
PREFACE
Thank you for purchasing a Hannspree Liquid Crystal Display Monitor (LCD
Monitor).
Please carefully read this manual in its entirety before setting up, using or
operating your Monitor. To ensure the safe and correct installation and
operations of the Monitor, it is important that the safety and operation
instructions in this manual are followed.
This instruction manual is designed to assist you in setting up and using the
Monitor. The information in this manual has been carefully checked for
accuracy; however, no guarantee is given to the correctness of the contents.
The information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not
be liable for direct, indirect, special, exemplary, incidental or consequential
damages arising from any defect or omission in this manual, even if advised of
the possibility of such damages in advance.
© 2007 Hannspree Specifications and design are subject to change without
notice. All brand, product, service names and logos are trademarks and/or
registered trademarks of their respective manufacturers and companies.
Screen shots are simulated.
6
Content
Safety Precautions .............................................................................8
First Setup ..........................................................................................9
Quick Installation ................................................................................9
Front View of the Product...................................................................10
Rear View of the Product....................................................................10
Using On Screen Display (OSD) Functions........................................11
Supporting Timing Modes...................................................................14
Technical Information..........................................................................15
Care and Maintenance .......................................................................16
Troubleshooting..................................................................................16
7
Safety Precautions
This monitor is manufactured and tested on a ground principle that a
XVHU¶VꢀVDIHW\ꢀFRPHVꢀ¿UVWꢁꢀ+RZHYHUꢂꢀLPSURSHUꢀXVHꢀRUꢀLQVWDOODWLRQꢀPD\ꢀUHVXOWꢀ
danger to the monitor as well as to the user. Carefully go over the following
WARNINGS before installation and keep this guide handy.
WARNINGS:
‹ꢀThis monitor should be operated only at the correct power sources
indicated on the label on the rear end of the monitor. If you’re unsure of
the power supply in your residence, consult your local dealer or power
company.
‹ꢀDo not try to repair the monitor yourself as it contains no user-
VHUYLFHDEOHꢀSDUWVꢁꢀ7KHꢀPRQLWRUꢀVKRXOGꢀRQO\ꢀEHꢀUHSDLUHGꢀE\ꢀDꢀTXDOL¿HGꢀ
technician.
‹ꢀDo not remove the monitor cabinet. There is high-voltage parts inside
that may cause electric shock to human bodies, even when the power
cord is disconnected .
‹ꢀStop using the monitor if the cabinet is damaged. Have it checked by a
service technician.
‹ꢀPut your monitor only in a clean, dry environment. Unplug the monitor
immediately if gets wet and consult your service technician.
‹ꢀAlways unplug the monitor before cleaning it. Clean the cabinet with a
clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not
directly onto the glass screen.
‹ꢀKeep the monitor away from magnetic objects, motors, TV sets, and
transformer.
‹ꢀDo not place heavy objects on the cable or power cord.
‹ꢀFor PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed
near the equipment and shall be easily accessible.
8
First Setup
Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories :
zꢀPower cable
zꢀD-Sub cable (15 pin)
zꢀAudio cable
zꢀ
HDMI Cable
(Optional)
zꢀ
DVI-D/HDMI Cable
(Optional)
Warranty and
zꢀ
Service Manual
(including User’s manual)
CD ROM
zꢀ
Quick Installation
1. Connect video cable (D-Sub cable)
Make sure both monitor and computer are powered OFF. Connect the video
cable (D-Sub cable) to the computer, then to the monitor.
2. Connect HDMI cable(Not supplied)
Connect the HDMI cable from HDMI output of computer to the HDMI input of
the monitor.
3. Connect power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
4. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
5. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)
Example: 1680 x 1050 @ 60 Hz
Resolution Right-click on the Windows desktop > Properties > Settings > “Desktop
Area”. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.
Example:
Power cable
(Optional)
HDMI Cable
9
Front View of the Product
ᄏꢀ
ᄐꢀ
ᄎꢀ
ᄋᄌꢀ ᄍꢀ ꢀ
ᄋꢀOSD TURN ON/OFF
ᄌꢀSCROLL DOWN/DECREASE
ᄍꢀSCROLL UP/INCREASE
ᄎꢀCONFIRM SELECTION
ᄏꢀPOWER ON/OFF
ᄐꢀLED INDICATOR
Rear View of the Product
ᄒꢀ
ᄑꢀ
ᄓ
ᄑꢀPOWER INPUT
ᄒꢀAUDIO INPUT
ᄓ HDMI INPUT (HDMI 19 PIN)
VGA INPUT (D-SUB 15 PIN)
10
Using On Screen Display (OSD) Functions
Display main menu.
Exit from OSD menu.
1
Auto adjust the image when at root menu.
&RQ¿UPꢀWKHꢀVHOHFWLRQꢁ
2
Select the desired item when in OSD menu.
When not in OSD menu, it is to immediately activate Contrast/
Brightness. It should be change to Contrast/ Brightness by pressing
button ź .
ŸRUꢀź
When not in OSD menu, it is to immediately activate Screen 16:10/
4:3. It should be change to aspect ratio by pressing button Ÿ .
źꢀꢁꢀŸ
ꢀꢀꢀꢀꢁꢀź
ꢀꢀꢀꢀꢁꢀŸ
1
Recall both of Contrast and Brightness.
Power Lock (when not in OSD menu)
OSD Lock (when not in OSD menu)
1
ꢀꢁꢀ
1
2
Display DOS model 720x400/640x400
Main Menu
11
Short Cuts Function from the button(s)
Auto Image Adjust: To auto adjust Horizontal Position,Vertical Position,
Phase (Fine Tune) and Clock (H. Size) of the screen.
Contrast : To adjust the foreground white level of screen image.
Ÿ : increase contrast, ź: decrease contrast.
DCR ON/OFF : Contrast ratio will be
Њ
2500:1, when DCR turn on.
Brightness : To adjust the luminance of the video.
Ÿ: increase brightness, ź : decrease brightness.
Input Select : When press Input Select change Input signal to Analog or
HDMI.
Audio Adjust : To adjust the audio functions.
Volume : To adjust the volume of speaker output.
Mute : To turn the Mute ON/OFF.
Color Adjust : To select the color for improving brightness and color
saturation between cool, normal, warm, and User Color.
Cool : Adds blue to screen image for cooler white.
Normal : Adds red to screen image for warmer white and richer red.
Warm : Adds green to screen image for a darker color.
User Color : Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ź or Ÿ button to adjust selected color.
Information : To display the information, regarding the current input signal
coming from the graphic card in your computer.
Note: See your graphic card user guide for more information about
changing the resolution and refresh rate.
Horizontal Size : To adjust the width of the screen image.
ź : decrease the width of screen image, Ÿ : increase the width of screen
image.
12
H./V. Position : To adjust the horizontal and vertical position of the video.
H. Position : Ÿ : move screen to the right, ź : move screen to the left.
V. Position : Ÿ : move screen up, ź : move screen down.
Fine Tune : To adjust the delay time of data and clock.
Press źꢀor Ÿ to adjust to your preference.
Sharpness : To adjust the clarity of a non-WSXGA (1680x1050) signal
with ź or Ÿ button.
Aspect Ratio : To select the Aspect ratio is 16:10 or 4:3.
Setup Menu : To set up Language Select, OSD Position, OSD Time Out,
and OSD Background.
Language Select : To allow users to choose from available languages.
OSD Position : Press 2 button to select between horizontal and vertical
OSD Position adjustment.
H. Position : To horizontally adjust the OSD position.
Ÿ : move OSD to the right, ź : move OSD to the left.
V. Position : To vertically adjust the OSD position.
Ÿ : move OSD up, ź : move OSD down.
OSD Time Out : To automatically turn off On Screen Display(OSD)after a
preset period of time.
OSD Background : Allows the user to turn the OSD Background On or
Off
Memory Recall : To recall factory settings for Video & Audio controls.
Press button 2 to select the Memory Recall menu option.
13
Supporting Timing Modes
VGA
720 x 400 @ 70Hz
VGA
MAC
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 74.6Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1152 x 864 @ 75Hz
1152 x 870 @ 75Hz
1280 x 960 @ 60Hz
1280 x 1024 @ 60Hz
1280 x 1024 @ 75Hz
1440 x 900 @ 60Hz
1440 x 900 @ 75Hz
1680 x 1050 @ 60Hz
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
VESA
VESA
*ONLY SUPPORT HDMI MODE
NTSC 480i
NTSC 480p
PAL 576i
VESA CVT
VESA CVT
VESA CVT
VESA CVT
PAL 576p
HD 720p
HD 1080i
Warning : Do not set the graphic card in your computer to exceed these maximum
refresh rates. Doing so may result in permanent damage to your monitor.
14
Technical Information
7HFKQLFDOꢀ6SHFL¿FDWLRQ
LCD Panel
22.0” TFT
Energy Star compliant VESA
Power Management
DPMS compatible
< 1 W
WSXGA 1680 x 1050 max. Vertical Frequency 60Hz
max.
Displayable Resolution
Pixel Dimension
LCD Display Color
Tilt
0.282 x 0.282 mm
16.7M
0°~20°
Active Display Area
473.76 mm x 296.1mm
Operating: 0°C ~ +40°C
Temperature
Storage: -20°C ~ + 60°C
Compliance
Power
UL, CE, FCC,3C,BSMI,GOST,ENERGY STAR
Input Voltage AC100-240 V
2W x 2
Speaker
15
Care and Maintenance
Care
zꢀAvoid exposing your monitor directly to sunlight or other heat source. Place your
monitor away from the sun to reduce glare.
zꢀPut your monitor in a well ventilated area.
zꢀDo not place any heavy things on top of your monitor.
zꢀMake certain your monitor is installed in a clean and moisture-free area.
zꢀKeep your monitor away from magnets, motors, transformers, speakers, and TV
sets.
Safety Tips
zꢀIf smoke, abnormal noise or odor came out from your monitor, caution you
should remove the power cord immediately and call your service center.
zꢀNever remove the rear cover of your monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
zꢀNever try to repair your monitor yourself. Always call your service center or a
TXDOL¿HGꢀWHFKQLFLDQꢀWRꢀ¿[ꢀLWꢁ
Troubleshooting
No power
zꢀMake sure A/C power cord is securely connected to the power adapter and the
SRZHUꢀVXSSO\ꢀLVꢀ¿UPO\ꢀFRQQHFWHGꢀWRꢀWKHꢀPRQLWRUꢁ
zꢀPlug another electrical device into the power outlet to verify that the outlet is
supplying proper voltage.
zꢀMake sure all signal cables are installed.
Power on but no screen image
zꢀMake sure the video cable supplied with the monitor is tightly secured to the
video output port on back of the computer. If not, tightly secure it.
zꢀAdjust brightness.
Wrong or abnormal colors
zꢀIf any colors (red, green, blue) are missing, check the video cable to make sure
it is securely connected. Loose or broken pins in the cable connector could
cause an improper connection.
zꢀConnect the monitor to another computer.
According to WEEE regulation , this monitor can’t be handled as
normal trash in Europe when it is out of usage. Please refer to
the recycle information from our website to handle it.
16
|
