ZGU385LSMSS/ZGU385NSMSS
GE Monogram® 36" Stainless Steel Gas Cooktop
Dimensions and Installation Information (in inches)
21-3/16”
Deep at Center
36-3/4”
3-3/4”
12” Min.
from Cutout
to Side Walls
19-1/8”
3-3/8” Min.
33-7/8”
from Cutout
to Rear Vertical
Combustibles
2-1/2” Min.
from Cutout
to Front of
Countertop
36” Min.
Cabinet Base
Note: Reference Instructions, GE Monogram 36”
Stainless Steel Cooktop Installation, packed with
product, for complete details.
The house gas supply should be at least 1" from
the back wall.
Note: The cooktop cutout is rectangular.
The bowed front edge of the cooktop will sit on top
of the counter.
These cooktops may be installed in combination with a
Monogram downdraft vent, a Monogram single oven or a
Monogram warming drawer. See installation instructions for
details.
The electrical outlet should be 12" below the
countertop and within reach of the 4 ft. power cord.
Model ZGU385NSMSS - Natural Gas
Model ZGU385LSMSS - Liquid Propane
These stainless steel cooktops are factory set for natural or
liquid propane gas. Be sure to order the correct model for
the installation situation.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 6/07
130239
|