Owner’s Manual
Please read before using this unit.
DVD/CD Player with Video Cassette Recorder
DV220TT8
Supplied Accessories
remote control
(NB606UD /
NB656UD)
RCA audio/video cables
(WPZ0102TM015 /
WPZ0102LTE01)
If you need additional operating assistance
after reading this owner’s manual, please call
batteries
(AA x 2)
owner’s manual
(1VMN23390)
Owner’s Manual
TOLL FREE : 1-800-844-5001
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Contents
PRECAUTIONS
DVD FUNCTIONS
Laser Safety.................................................................................................................2
Playback .................................................................................................15
MP3 Playback .........................................................................................16
On-Screen Display ..................................................................................16
Important Safeguards.............................................................................3
Location and Handling...........................................................................................4
Avoid the Hazards of Electrical Shock and Fire.............................................4
Moisture Condensation Warning.......................................................................4
About Copyright.......................................................................................................4
Notice for Progressive Scan Outputs................................................................4
Symbols Used in this Manual...............................................................................4
Maintenance ..............................................................................................................4
Search Functions ....................................................................................17
Using Track Search..................................................................................................17
Using Title / Chapter Search................................................................................17
Using Time Search ..................................................................................................17
Marker Setting..........................................................................................................17
Repeat / Random / Programmed Playback ...........................................18
Repeat Playback.......................................................................................................18
Repeat A-B Playback ..............................................................................................18
Random Playback....................................................................................................18
Programmed Playback..........................................................................................18
Special Settings ......................................................................................19
Subtitle Language...................................................................................................19
Audio Language ......................................................................................................19
Camera Angles .........................................................................................................19
Black Level Setting..................................................................................................19
Stereo Sound Mode................................................................................................19
Virtual Surround.......................................................................................................19
DVD Setting ............................................................................................20
LANGUAGE Setting.................................................................................................20
DISPLAY Setting.......................................................................................................21
AUDIO Setting ..........................................................................................................21
PARENTAL Setting...................................................................................................22
OTHERS Setting........................................................................................................22
Reset to the Default Setting (Except for PARENTAL Setting)..................23
About Cassette Tapes and Discs .............................................................5
Playable Media..........................................................................................................5
Unplayable Discs ......................................................................................................5
SETUP
Connections.............................................................................................6
Connection to a TV..................................................................................................6
Connection to an Audio System.........................................................................7
Connection to a Cable/Satellite Box .................................................................7
Preparation for Use .................................................................................8
Turning on Unit for the First Time .....................................................................8
Clock Setting..............................................................................................................8
Function Overview ..................................................................................9
Front Panel Indicator Lights.................................................................................9
Selecting DVD or VCR Operation........................................................................9
Front & Rear Terminals...........................................................................................9
Remote Control........................................................................................................10
Installing the Batteries for the Remote Control...........................................10
VCR FUNCTIONS
INFORMATION
Playback .................................................................................................11
Troubleshooting Guide ..........................................................................23
Specifications .........................................................................................24
Language Code List ................................................................................24
LIMITED WARRANTY...............................................................................24
Español ...................................................................................................25
Quick Use Guide......................................................................................27
Other Operations....................................................................................11
Index Search..............................................................................................................11
Time Search...............................................................................................................11
Auto Repeat...............................................................................................................12
Recording................................................................................................12
Recording & One-touch Timer Recording (OTR)..........................................12
Timer Recording ......................................................................................................12
Notes for Timer Recording & One-touch Timer Recording (OTR).........13
Satellite Link..............................................................................................................14
Copying a Cassette Tape......................................................................................14
Basic TV Connection
rear of TV
AC
outlets
connect
plug in
1
2
DVD/VCR
AUDIO OUT
VCR
AUDIO IN
rear of the unit
L
L
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
AUDIO OUT
VCR
AUDIO OUT
VIDEO OUT
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
Y
L
AUDIO IN
VIDEO IN
L
R
C
B
PB
/
/
R
R
COAXIAL
VIDEO OUT
R
from the unit
from TV
C
PR
R
VIDEO OUT
VIDEO IN
Please refer to “Connections”on page 6.
3
Important Safeguards
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
12. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
13. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the video product due to
lightning and power-line surges.
14. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
15. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into
this video product through any openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the
video product.
17. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of
the loss of an authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
6. Attachments - Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
PORTABLE CART WARNING
(Symbol provided by RETAC)
8. Accessories - Do not place this video
product on an unstable cart, stand, tripod,
bracket, or table. The video product may
fall, causing serious injury to a child or
adult, and serious damage to the appliance.
18. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
Use only with a cart, stand, tripod, bracket,
S3125A
or table recommended by the manufac-
turer, or sold with the video product. Any mounting of the
appliance should follow the manufacturer's instructions
and should use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should be
moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to
overturn.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the video product to its
normal operation.
9. Ventilation - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the video
product and to protect it from overheating, and these
openings must not be blocked or covered.
The openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface. This video
product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources - This video product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company.
For products intended to operate from battery power, or
other sources, refer to the operating instructions.
11. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
e. If the video product has been dropped or damaged in any
way.
f. When the video product exhibits a distinct change in
performance this indicates a need for service.
19. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteris-
tics as the original part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
20. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to perform
safety checks to determine that the video product is in proper
operating condition.
21. Heat - This video product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
–
–
3
EN
Location and Handling
Symbols Used in this Manual
•
Do not stand this unit up vertically. Install this unit in a
horizontal and stable position. Do not place anything directly on
top of this unit. Do not place this unit directly on top of the TV.
The following symbols appear in some headings in this manual.
: Description refers to video cassette tapes.
• Depending on the TV, noise or disturbance of the picture and/or
sound may be generated if this unit is placed too close to your
TV. In this case, please ensure enough space between your TV
and this unit.
:
Description refers to DVD-video.
: Description refers to audio CD.
• Do not cover or place this unit in enclosed spaces to
prevent excessive temperature build up.
: Description refers to CD-RW/-R with MP3 files.
•
Do not place this unit in direct sunlight, or near heat sources.
Maintenance
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
authorized service center immediately.
• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this unit.
For service and adjustment inside the cabinet, call a qualified
dealer or an authorized service center.
Servicing
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 23 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug, and please call our toll free
customer support line found on the cover of this manual to
locate an authorized service center.
• Be sure to remove disc and cassette tape and unplug the AC
power cord from the output before carrying this unit.
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from AC
outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our authorized service
center for servicing.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or anti-
static spray intended for analog records.
•
Do not put your fingers or objects into the unit cassette holder.
Moisture Condensation Warning
Cleaning the Disc Lens
Moisture may form inside this unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm environ-
ment.
If moisture forms inside this unit, it may not operate properly or
damage the cassette tape. In such case, do not use this unit at
least for 2 hours until its inside gets dry.
• If this unit continues to perform improperly even after you have
referred to the relevant sections and to the
“Troubleshooting Guide” in this manual, the laser optical pickup
unit may be dirty. Consult your dealer or an authorized service
center for inspection and cleaning of the laser optical pickup
unit.
Disc Handling
• When you handle a disc, hold it by its edge and try not to touch
the surface of the disc.
About Copyright
• Always store the disc in its protective case when not in use.
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
Auto Head Cleaning
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
• Automatically cleans video heads as you insert or remove a
cassette tape, so you can see a clear picture.
• Playback picture may become blurred or interrupted while the
TV program reception is clear. Dirt accumulated on the video
heads after a long period of use, or the usage of rental or worn
cassette tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your unit
may need to be cleaned.
Notice for Progressive Scan Outputs
Consumers should note that not all high definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of picture problems with 525
progressive scan output, it is recommended that the user switch
the connection to the ‘standard definition’ output. If there are
questions regarding your TV set compatibility with this 525p DVD
player, please contact our customer service center.
1. Please visit your local audio/video store and purchase a good
quality VHS video head cleaner.
2. If a Video head cleaner does not solve the problem, please call
our toll free customer support line found on the cover of this
manual to locate an authorized service center.
Note:
• Remember to read the instructions along with the video head cleaner
before use.
• Clean video heads only when problems occur.
Note to CATV system installer:
• This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground should be connected
to the grounding system of the building, as close to the point of cable
entry as practical.
Manufactured under license from
Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby
Laboratories.
–
–
4
EN
About Cassette Tapes and Discs
Playable Media
Type of
media
Recorded
signals
Mark (logo)
Region code
Media size
Tape speed and disc types
tape width
1/2 inches
(12.65mm)
cassette
tape
SP: 1-5/16 inch/sec. (33.40 mm/sec.)
SLP: 7/16 inch/sec. (11.12 mm/sec.)
analog video
DVD-video
*1, 2, 3, 5, 9
or
5 inches
(12 cm)
or
3 inches
(8 cm)
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
8, 9, 10
e.g.)
title 1
title 2
digital video
(MPEG2)
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1
chapter 2
DVD+RW
DVD+R
*1, 3, 4, 5, 7,
8, 9
audio CD
*3, 5, 9
audio CD
MP3
e.g.)
track 1
track 2
track 3
track 4
track 5
track 6
5 inches
(12 cm)
or
3 inches
(8 cm)
digital audio
or
MP3
CD-RW
CD-R
e.g.)
folder 1
folder 2
*3, 4, 5, 8, 9
file 1
file 2
file 3
file 4
file 5
file 6
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-video does not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special prop-
erties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if
they are played back, the sound or video quality will be compromised.
*6: You may play back the unfinalized DVD-RW/-R recorded in the video format on our brand’s DVD recorder. However, depending
on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*7: Only discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all (the
picture or sound may not be smooth, etc.).
*8: If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*10: Discs recorded in the VR (video recording) format cannot be played back.
Unplayable Discs
NEVER play the following discs as malfunction may result!
DVD-RAM, DVD-audio, CD-i, photo CD, video CD, DVD with region codes other than 1 or ALL, DTS-CD, DVD-ROM for personal computers,
CD-ROM for personal computers
On the following disc, the sound MAY NOT be heard.
super audio CD
Note:
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be delivered.
Any other discs without compatibility indications
–
–
5
EN
SETUP
Connections
Connection to a TV
Please refer to “Basic TV Connection” on the front page before you use this unit.
VCR and Basic DVD Connection
Available for DVD only
DVD’s picture quality
analog audio
standard picture
good picture
better picture
COMPONENT
VIDEO IN
Y
COMPONENT
VIDEO IN
Y
AUDIO IN
TV
S-VIDEO IN
VIDEO IN
L
R
C
B
PB
or
or
or
and
A
U
D
I
O
I
N
L
C
R
PR
R
V
I
D
E
O
I
N
RCA audio cable
RCA video cable
S-video cable
component video cable
This unit
DVD/VCR
AUDIO OUT
VR
DVD/VCR
VCR
DVD
DVD
AUDIO S-VIDEO
OUT OUT
DVD
AUDIO
OUT
COMPONENT
VIDEO OUT
COMPONENT
AUDIO S-VIDEO
VIDEO OUT
OUT
OUT
L
Y
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
AUDIO S-VIDEO
VIDEO OUT
OUT OUT
DIGITAL
AUDIO OUT
L
Y
L
AUDIO IN
VIDEO IN
L
R
C
B
PB
/
R
COAXIAL
VIDEO OUT
R
C
/
/
PB
B
C
PR
/
R
VIDEO OUT
R
C
PR
R
or
AUDIO OUT
COMPONENT
VIDEO OUT
VIDEO OUT
S-VIDEO OUT
Note:
• Connect this unit directly to your TV. If an RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
• DIGITAL AUDIO OUT (COAXIAL), DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set
“PROGRESSIVE” to “ON” in “DISPLAY” menu, so that the PROGRESSIVE SCAN indicator on this unit lights up. Refer to pages 20-21 for
more details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at
all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on
the front of the unit for more than 5 seconds, so that the PROGRESSIVE SCAN indicator on this unit turns off.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
AUX
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
Hitachi:
INPUT, AUX
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEO3
Kenwood:
LXI-Series:
Magnavox:
AUX
00
AUX CHANNEL
–
–
6
EN
Connection to an Audio System
Playing 2 Channel Analog Audio
stereo system
Playing Multi Channel Digital Audio
Dolby Digital decoder,
MD deck or DAT deck
Audio
L
R
analog audio
input jacks
COAXIAL
digital audio
input jack
RCA audio cable
digital audio coaxial cable
DVD
DVD/VCR
AUDIO OUT
CR
DVD
AUDIO
OUT
COMPONENT
AUDIO S-VIDEO
VIDEO OUT
OUT OUT
DIGITAL
AUDIO OU
This unit
L
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
L
Y
L
AUDIO IN
VIDEO IN
L
R
C
B
/
R
PB
COAXIAL
VIDEO OUT
R
C
/
PR
R
COAXIAL
R
or
AUDIO OUT
DIGITAL AUDIO OUT
SETUP > QUICK >
DOLBY DIGITAL
Setting
Connection
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
BITSTREAM
Connecting to other device (an MD deck
or DAT deck etc.) without Dolby Digital
decoder.
PCM
* To complete these settings, refer to pages 20-21.
Note:
• The audio source on a disc in a Dolby Digital multi channel surround
format cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can enjoy
high-quality Dolby Digital multi channel surround sound as heard in the
movie theaters.
• Playing back a DVD using incorrect settings may generate noise distor-
tion and may also damage the speakers.
Connection to a Cable/Satellite Box
external tuner
(cable/satellite box)
rear of TV
rear of the unit
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT
OUT
Y
L
AUDIO IN
L
C
B
PB
/
/
R
R
COAXIAL
VIDEO OUT
VIDEO IN
R
C
PR
R
A
U
D
I
O
I
N
L
L1
R
V
I
D
E
O
I
N
DVD/VCR
VCR
AUDIO OUT
AUDIO OUT
AUDIO IN
RCA audio cable
RCA video cable
L
L
L
AUDIO IN
VIDEO IN
RCA audio cable
RCA video cable
R
R
R
VIDEO OUT
VIDEO OUT
VIDEO IN
Using the unit with a cable/satellite box
Special note when connected to a cable/satellite box:
Only the active channel on your cable/satellite box may be
viewed or recorded when connected to this unit.
Do not change channels during a recording.
You cannot record on channel while viewing another.
1. Connect an RCA audio and video cables to the audio and
video output jacks of your cable/satellite box and to the audio
and video input jacks at the rear of the unit
.
2. Press [INPUT SELECT] on your remote control until “L1” is
displayed on your TV.
Note:
• Your cable/satellite box can be accessed only by connecting it to L1
(rear panel jacks) of the unit. Even if the unit is turned off, the signal
from the external tuner is output to the TV through the unit.
L1: Rear panel terminals
L2: Front panel terminals
Refer to “Front & Rear Terminals” on page 9 for more information.
–
–
7
EN
Preparation for Use
Turning on Unit for the First Time
Clock Setting
VCR
VCR
Please note: most instructions in this man-
ual refer to remote control use.
Press [SETUP] and select “CLOCK SET”.
Then press [B] to go to next step.
- M E N U -
Be sure your TV’s input is set to VIDEO. (Name may
vary with TV manufacturer. See your TV manual for
details.)
1
1
2
TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
B
SETUP
LANGUAGE SELECT
or
Select your on-screen language.
Then press [B] to continue.
LANGUAGE SELECT
B
ENGLISH
[ON]
FRANCAIS
ESPAÑOL
• If the clock is not set, the “CLOCK SET” menu appears when you
press [SETUP]. In this case, go to step 2.
POWER
or
CLOCK SET
Select the current month.
Then press [B] to go to next step.
2
3
4
5
6
7
8
MONTH DAY
1 0 - -
YEAR
/
- - - -
When “CLOCK SET” menu appears,
go to step 2 in “Clock Setting” on this page.
CLOCK SET
3
HOUR MINUTE
AM/PM
- -
MONTH DAY
1 0 – –
YEAR
- -
:
- -
/
– – – –
or
HOUR MINUTE
– – – –
AM/PM
– –
:
or
CLOCK SET
Select the current day.
Then press [B] to go to next step.
MONTH DAY
1 0 0 2
YEAR
- - - -
/
HOUR MINUTE
AM/PM
- -
- -
:
- -
or
To Change the Selected On-screen Language
CLOCK SET
Select the current year.
Then press [B] to go to next step.
- M E N U -
MONTH DAY
1 0 0 2
YEAR
TUE 2 0 0 7
Press [SETUP] until the main menu appears.
/
1
B
TIMER PROGRAMMING
SATELLITE LINK
HOUR MINUTE
- - - -
AM/PM
- -
SETUP
:
AUTO REPEAT [OFF]
CLOCK SET
or
LANGUAGE SELECT
CLOCK SET
Select the current hour.
Then press [B] to go to next step.
- M E N U -
MONTH DAY
YEAR
TUE 2 0 0 7
Select “LANGUAGE SELECT”.
Then press [B] to go to next step.
1 0 0 2
/
2
TIMER PROGRAMMING
SATELLITE LINK
HOUR MINUTE
0 5 - -
AM/PM
- -
AUTO REPEAT [OFF]
CLOCK SET
:
or
B
LANGUAGE SELECT
or
CLOCK SET
Select the current minute.
Then press [B] to go to next step.
MONTH DAY
YEAR
TUE 2 0 0 7
Select “ENGLISH”, “FRANCAIS” or
“ESPAÑOL”. Then press [CLEAR/C.RESET].
LANGUAGE SELECT
1 0 0 2
/
3
B
ENGLISH
FRANCAIS
ESPAÑOL
[ON]
HOUR MINUTE
0 5 4 0
AM/PM
- -
:
or
CLEAR/
C. RESET
or
CLOCK SET
Select “AM” or “PM”.
MONTH DAY
YEAR
TUE 2 0 0 7
Note:
1 0 0 2
/
• If you accidentally select Spanish or French and need English:
HOUR MINUTE
0 5 4 0
AM/PM
P M AM
B PM
or
:
Press [SETUP] and choose
“SELEC. IDIOMA
”
or “SELECTION LANGUE”.
Press [B] and select “ENGLISH”. Finally, press [CLEAR/C.RESET].
Press [SETUP] to exit the “CLOCK SET” menu.
SETUP
Note:
• To go back, press [s] during steps 2 to 7.
• Clock setting will be lost after a power failure, or this unit has been
unplugged for more than 30 seconds.
–
–
8
EN
Function Overview
Front Panel Indicator Lights
Lights up when the progressive scan system is activated.
Lights up when the inserted disc
is being played back.
Lights up during a recording or one-touch timer
recording (OTR). Blinks when a recording is paused.
Blinks when an unplayable disc
is inserted.
Lights up when this unit
is in the DVD mode.
POWER
OPEN/CLOSE
REC
TIMER REC
VCR
DVD
P-SCAN
PLAY
VIDEO
AUDIO
REW
F.FWD STOP/EJECT PLAY REC/OTR
TRACKING
OUTPUT
REV/SKIP STOP
PLAY SKIP/FWD
Lights up when the unit is turned on.
Lights up when this unit is in the VCR mode.
Lights up when the timer recording or
one-touch timer recording (OTR) has been set.
Selecting DVD or VCR Operation
You must first select either DVD or VCR operation.
OPEN/CLOSE
POWER
OPEN/CLOSE
TRACKING
SPEED
T-SET
VCR MODE
1
4
7
2
5
8
3
6
9
VCR
DVD
P-SCAN
PLAY
Press [VCR ] on the remote control.
TRACKING
OUTPUT
REV/SKIP STOP
PLAY SKIP/FWD
(The VCR OUTPUT light will illuminate.)
CLEAR/
INPUT
SELECT
C. RESET
0
VCR
+10
DVD
VCR button
DVD button
DISPLAY
MODE
DVD MODE
Press [DVD ] on the remote control.
(The DVD OUTPUT light will illuminate.)
PLAY
STOP
SKIP
DVD OUTPUT light
VCR OUTPUT light
OUTPUT button
REC/OTR
PAUSE
AUDIO
VCR
DVD
SEARCH
MODE
TOP MENU
MENU
ENTER
SETUP
ZOOM
RETURN
A-B
OUTPUT
SUBTITLE
ANGLE
REPEAT
Front & Rear Terminals
rear panel
front panel
1
2
3
DVD
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT
AUDIO S-VIDEO
OUT
OUT
L1
Y
L
AUDIO IN
VIDEO IN
L
C
/
/
PB
B
R
REC
TIMER REC
VIDEO
AUDIO
COAXIAL
VIDEO OUT
R
L2
C
PR
R
REW
F.FWD STOP/EJECT PLAY REC/OTR
7 6 5 4
8
4
3
1: DVD AUDIO OUT* (analog) jacks
5: DVD/VCR VIDEO OUT jack
Connect an audio cable from here to the audio input jack of your televi-
sion or audio device.
Connect a video cable from here to the VIDEO input jack of your televi-
sion or audio device. Standard connection for DVD/VCR use.
6: COMPONENT VIDEO OUT* jacks
Connect component video cables from here to the component video
input jacks of your television.
2: DVD/VCR AUDIO OUT jacks
Connect an audio cable from here to the audio input jack of your television
or audio device. Standard connection for DVD/VCR use.
7: S-VIDEO OUT* jack
Connect an S-video cable from here to the S-video input jack of your
television.
3: VCR AUDIO IN jack
Connect a monaural audio cable from the audio output jack of your
camcorder, VCR, etc. to here. After making the connection, press
[INPUT SELECT] on the remote control. Select “L1” to activate the rear
AUDIO IN jack, or “L2” to activate the front.
8: DIGITAL AUDIO OUT COAXIAL* jack
Connect a digital audio coaxial cable from here to the digital audio input
jack of your digital audio receiver.
4: VCR VIDEO IN jack
Connect a video cable from the video output jack of your camcorder, VCR,
etc. to here. After making the connection, press [INPUT SELECT] on the
remote control. Select “L1” to activate the rear VIDEO IN jack, or “L2” to
activate the front.
* For enhanced DVD viewing. DVD/VCR video and audio connection required
to view cassette tapes.
Note:
• Audio and video cables are included for both VCR and DVD viewing.
You can enhance your DVD picture and sound quality with an S-video
cable, component video cables, or a digital audio coaxial cable. Please
purchase the necessary cables at your local store. (Refer to pages
6-7.)
–
–
9
EN
Remote Control
DVD mode
VCR mode
Media
POWER
OPEN/CLOSE
TRACKING
Button
SPEED
T-SET
(Alphabetical order)
1
4
7
2
5
8
0
3
6
1
4
7
2
5
8
3
6
9
• To select chapter or title
directly.
• To select track or file directly.
9
+10
• To search forward/backward
through a disc.
• To begin slow forward/reverse
playback in the pause mode.
CLEAR/
INPUT
SELECT
• To forward/backward a tape.
• To begin slow forward
playback in the pause mode.
C. RESET
• To search forward/backward
through a disc.
0
VCR
+10
DVD
DISPLAY
MODE
A-B
• To repeat between your chosen • To repeat between your
PLAY
point of A and B.
chosen point of A and B. (CD)
ANGLE
STOP
SKIP
• To select camera angles on a
disc.
REC/OTR
TOP MENU
MENU
PAUSE
AUDIO
AUDIO
• To select audio languages on a • To select “STEREO”, “L-ch” or
disc.
SEARCH
MODE
“R-ch”. (CD)
ENTER
• To clear the markers. (CD)
• To remove status number in
program input.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat. (CD)
• To clear the markers.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
SETUP
ZOOM
RETURN
A-B
CLEAR/
C. RESET
• To exit the VCR menu.
• To reset the tape counter.
SUBTITLE
ANGLE
REPEAT
DISPLAY
DVD
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and L1 or L2.
• To select DVD output mode.
• To activate DVD mode.
• To select the DVD output mode.
• To activate DVD mode.
• To select an item on
the VCR menu.
• To advance to the
next VCR menu.
• To go back one step
during clock and
timer programming.
ENTER
• To move the cursor and deter- • To move the cursor and deter-
mine its position.
mine its position.
Installing the Batteries for
the Remote Control
INPUT
SELECT
• To select input “L1” or “L2”.
Install the batteries (AA x 2) matching
the polarity indicated inside battery
compartment of the remote control.
MENU
MODE
• To call up the disc menu on a
disc.
• To call up the file list. (MP3)
• To arrange the playing order or
play randomly.
• To set virtual surround on/off.
• To set black level on/off.
• To set virtual surround on/off.
1
2
3
OPEN/CLOSE
PAUSE
• To eject the cassette tape from
the cassette compartment.
• To open or close the disc tray. • To open or close the disc tray.
• To pause tape playback or
recording.
• To advance playback one frame
at a time.
• To pause disc playback.
• To advance playback one frame • To pause disc playback.
at a time.
• To begin disc playback.
• To turn the unit on/off.
• To begin disc playback.
• To turn the unit on/off.
• To begin tape playback.
PLAY
Keep in mind the following when using the
remote control:
POWER
• To turn the unit on/off.
•
Make sure that there are no obstacles
between the remote control and the infra-
red sensor window on the unit.
REC/OTR
REPEAT
RETURN
• To start recording or one-touch
timer recording (OTR).
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or
disc repeatedly. (MP3)
• The maximum operable ranges from the
unit are as follows.
- Line of sight: approx. 23 feet (7m)
• To play back a chapter or title
repeatedly.
• To select the repeat mode on/
off.
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
SEARCH
MODE
• To search track.
• To search chapter, title or time.
• To set or search the markers.
• To call up the index or time
search menu.
• To search time. (CD)
• To set or search the markers. (CD)
SETUP
SKIP
• To call up the DVD menu.
• To skip chapters or titles.
• To call up the DVD menu.
• To skip tracks or files.
• To call up the VCR menu.
SPEED
• To select the recording speed.
• To stop playback or recording.
STOP
• To stop playback.
• To stop playback.
Note:
SUBTITLE
• To select subtitles on a disc.
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
• To return to the top file of the
highest hierarchy in the pro-
gram and file list. (MP3)
TOP MENU
• To call up the top menu on a
disc.
•
If you turn off this unit, [OPEN/CLOSE A] on the
remote control is not available.
TRACKING
TRACKING
• To adjust the tracking manually
during playback.
Be sure to use [OPEN/CLOSE A] or
[STOP/EJECT
C
A] on the unit.
T-SET
• To put the VCR into standby
mode for a timer recording.
VCR
• To select the VCR output mode.
• To activate VCR mode.
ZOOM
• To magnify part of a picture.
(2x/4x)
–
–
10
EN
VCR FUNCTIONS
Playback
Before: Turn on the TV.
Note:
4
1
VCR
• When a cassette tape
without a record tab is
inserted, the unit will
start playback automati-
cally.
• Tracking will be auto-
matically adjusted upon
playback. To adjust the
tracking manually, press
[TRACKING K / L]
during playback.
POWER
OPEN/CLOSE
SPEED
T-SET
POWER
Insert a cassette tape
into this unit.
To start playback
1
2
4
1
4
7
2
5
8
3
6
9
TRACKING
PLAY
CLEAR/
INPUT
SELECT
C. RESET
REC
TIME
VIDEO
AUDIO
0
VCR
+10
DVD
DISPLAY
MODE
REW
F.FWD STOP/EJECT PLAY REC/OTR
To stop playback
To eject the cassette tape
3
OPEN/CLOSE
PLAY
STOP
2
STOP
3
4 3
2
Other Operations
To cue or review picture during playback (picture search)
To play back in slow motion (slow mode)
Use
[
g
]
or
[
h
]
([ F.FWD
g
]
or [REW
h
]
on this unit).
Press [PAUSE
F]
during playback, then press
[g
]
([ F.FWD
g
]
on this
unit).
• Press it again and the unit will search in super high speed. (in the
SLP mode only)
• If you want to change speed in slow mode, press [g] or [h]
([ F.FWD g] or [REW h] on this unit), slow speed will be more
fast and slow mode.
To freeze the picture on TV screen during playback (still mode)
Press [PAUSE F]. Each time you press the button, the picture will
be forwarded by one frame.
• If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using [TRACKING K / L].
• If the picture is distorted or rolling vertically, adjust the vertical
hold control on your TV if equipped.
To reset the cassette tape counter (counter reset)
Press [DISPLAY] to display the cassette tape counter on the TV.
Press [CLEAR/C.RESET] to reset the counter to “0:00:00”.
•
If the noise bars appear on the TV screen, you can reduce it by using
[TRACKING
K
/
L].
To rewind the cassette tape automatically (auto rewind)
When a cassette tape reaches its end during playback, fast-
forward or recording (except timer recording and one-touch
timer recording), the cassette tape will automatically rewind to
the beginning. After rewinding finishes, the unit will eject the
cassette tape.
Note:
• To prevent damage to the cassette tape, still or slow mode will auto-
matically stop after 5 minutes.
• To return to playback from the picture search, still or slow mode, press
[PLAY B].
Time Search
Index Search
To search by index mark. The index mark will be made automati-
cally at the beginning of each recording.
To search by length of time.
VCR
VCR
• Insert a cassette tape into this unit.
• Insert a cassette tape into this unit.
Press [SEARCH MODE] twice.
1
2
TIME SEARCH
– : – –
Press [SEARCH MODE] once.
SEARCH
MODE
1
INDEX SEARCH
SEARCH
MODE
– –
Select the desired length of time
for fast forwarding or rewinding.
To select index mark
TIME SEARCH
2 : 5 0
2
INDEX SEARCH
0 3
01 ~ 20
0:01~ 9:59
or
beginning of
the contents
current program
end of the
contents
or
(1 minute~9 hours and 59 minutes)
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
To rewind
02
01
01
02
03
3
4
ss
index mark
To rewind
3
4
ss
To fast forward
BB
To fast forward
BB
When selected length of time is
reached, playback will start
automatically.
PLAY
B
When index mark is reached,
playback automatically begins.
PLAY
B
Note for Index Search & Time Search:
• These functions are not available during recording.
• Press [STOP C] to stop the search.
• If a cassette tape ends during a search, your search will be canceled and
the cassette tape will rewind to the beginning.
Note:
• The time gap between index marks should be more than 1 minute for SP
mode, 2 minutes for LP mode and 3 minutes for SLP mode.
–
–
11
EN
Auto Repeat
When “AUTO REPEAT“ is set to “ON“, the cassette tape will automatically rewind and start over when it reaches the end.
This will continue until auto repeat function is turned off.
VCR
- M E N U -
- M E N U -
Press [SETUP], and choose “AUTO REPEAT”.
Press [B] to “AUTO REPEAT” to set “ON” or “OFF”.
1
2
TIMER PROGRAMMING
SATELLITE LINK
TIMER PROGRAMMING
SATELLITE LINK
B
AUTO REPEAT [ON]
CLOCK SET
B
AUTO REPEAT [OFF]
CLOCK SET
SETUP
LANGUAGE SELECT
LANGUAGE SELECT
or
Press [SETUP] to exit.
Note:
• The auto repeat function can also be set “ON” or “OFF” by pressing [REPEAT] on the remote control.
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.
Recording
This unit has no tuner system so cannot receive TV broadcasts without external tuner
or such devices.
Note:
TV
this unit
external tuner
• You can also set to external tuner. Refer to “Satellite Link” on page 14.
Recording & One-touch Timer Recording (OTR)
VCR
6
3
2
POWER
OPEN/CLOSE
TRACKING
SPEED
T-SET
POWER
1
4
7
2
5
8
3
6
9
Insert a recordable
cassette tape.
Press [INPUT SELECT] until “L1” or
“L2” is displayed on the TV screen.
Select “L1” to activate rear input jacks.
Select “L2” to activate front input jacks.
1
2
CLEAR/
INPUT
SELECT
C. RESET
0
VCR
+10
DVD
REC
TIMER REC
DISPLAY
MODE
VIDEO
AUDIO
REW
F.FWD STOP/EJECT PLAY REC/OTR
INPUT
SELECT
PLAY
STOP
SKIP
5
4
REC/OTR
PAUSE
See note on the right.
5 6
4
1
Press [SPEED] to select the desired tape speed.
3
4
5
To stop recording temporarily (Pause mode)
SPEED
Tape speed
Type of tape
SP mode
Recording / playback time
Press [PAUSE F].
T60
T120
T160
2-2/3hours
8hours
• During the recording in pause mode, 5
TV screen. Each mark represents 1 minute.
• Press it again to resume recording.
C
marks appear on the
1hour
3hours
2hours
6hours
C
SP
SLP mode
• Pause mode will be automatically canceled after 5 minutes to
prevent damage to the cassette tape and the video head.
Press [REC/OTR] until desired recording time is selected.
REC/OTR
REC
(normal recording)
OTR (0:30)
OTR (1:00).....
OTR (7:30)
Note:
• Do not change the external tuner’s channel while you are recording.
You CANNOT watch one channel and record another at the same time.
• Connect your external tuner to the L1 (rear panel) jacks of the unit.
Connect camcorders and other such devices to the L2 (front panel)
jacks. Refer to page 7, 9.
OTR (8:00)
REC
Press [STOP C] to
stop recording.
Press [OPEN/CLOSE A] to eject the
recorded cassette tape.
6
OPEN/CLOSE
STOP
Accidental Erasure Prevention
To prevent accidental recording, remove erase-
protection tab of the cassette tape. To record
on it later, cover the hole with adhesive tape.
You CANNOT dub a DVD to a video cassette tape.
erase-protection tab
Timer Recording
VCR
• Insert a recordable cassette tape.
• Make sure to turn on the external
tuner.
Press [SETUP]. Select “TIMER PROGRAMMING”.
Select an empty program number.
Then press [B] to go to next step.
PROGRAM NUMBER
DATE – – / – –
START TIME – – : – – – –
1
1
2
- M E N U -
TIMER PROGRAMMING
PROG 12345678
DATE
START TIME
END
L1/L2
REC
TIME – – : – – – –
– –
SPEED – –
B
TIMER PROGRAMMING
SETUP
SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT
or
END
TIME
L1/L2
REC SPEED
Available program number flashes.
–
–
12
EN
ONE TIME PROGRAM
PROGRAM NUMBER
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
Then press [B] to go to next step.
Select recording speed.
Then press [CLEAR/C.RESET].
PROGRAM NUMBER
1
3
4
9
1
B
ONCE
DATE
1 0 / 2 3 TUE
DAILY
WEEKLY
START TIME 0 7 : 3 0 PM
END
L1/L2
REC
TIME 0 8 : 3 0 PM
CLEAR/
C. RESET
L1
or
SPEED SP
or
B
SP
SLP
•
[B].
To set another program after step 9, press
Then continue with step 2.
Select the desired date.
Then press [B] to go to next step.
ONE TIME PROGRAM
PROGRAM NUMBER
Press [T-SET] to set the timer standby mode.
or
10
1
DATE
1 0 / 2 3 TUE
T-SET
START TIME – – : – – – –
END
L1/L2
REC
TIME – – : – – – –
– –
SPEED – –
•
indicator on this unit lights up and the unit goes to the DVD
mode.
or
• You can program the unit to record up to 8 programs, within a
year in advance.
Note:
• To go back one step, press [s] during steps 3 to 9.
Select the desired starting time (hour).
Then press [B] to go to next step.
5
6
• Select “L1” to activate rear input jacks. Select “L2” to activate front input
jacks.
ONE TIME PROGRAM
or
or
PROGRAM NUMBER
DATE 1 0 / 2 3 TUE
START TIME 0 7 : 3 0 – –
1
To check, correct or cancel a timer program
END
L1/L2
REC
TIME – – : – – – –
– –
SPEED – –
1) Press [T-SET] then, [VCR ] on the remote control.
2) Press [SETUP] to call up the main menu.
3) Select “TIMER PROGRAMMING” by using [K / L], then press
[B].
4) Select the program number which you want to check by
using [K / L]. The details of the program you selected will
appear on the TV screen.
ONE TIME PROGRAM
PROGRAM NUMBER
Select “AM” or “PM”.
Then press [B] to go to next step.
1
DATE
1 0 / 2 3 TUE
START TIME 0 7 : 3 0 PM
END
TIME – – : – – – –
L1/L2
REC
– –
SPEED – –
AM
or
• Go to the digit you want to change by using [s / B]. Then,
enter correct numbers by using [K / L].
B
PM
Repeat the procedure in steps 5 and 6 to set the ending time.
• You may cancel the entire program by pressing [s] while
the program number blinks.
5) Press [CLEAR/C.RESET] to exit.
7
8
6) Press [T-SET] to return to the timer standby mode.
ONE TIME PROGRAM
Select “L1” or “L2”.
Then press [B] to go to next step.
PROGRAM NUMBER
DATE 1 0 / 2 3 TUE
START TIME 0 7 : 3 0 PM
1
To cancel a timer recording in progress
END
L1/L2
REC
TIME 0 8 : 3 0 PM
L1
or
Press [STOP/EJECT
C
A] on the unit.
SPEED – –
Notes for Timer Recording & One-touch Timer Recording (OTR)
• If a cassette tape is not in the unit or does not have the erase-protection tab, indicator on this unit blinks and timer recording cannot
be performed. Please insert a recordable cassette tape.
• When timer recordings are set, indicator on this unit lights up. To use the VCR as usual until the time for the recording, press [T-SET]
so that indicator lights off.
After an one-touch timer recording or a timer recording has been set, this unit operates as follows:
• If a cassette tape runs out before an one-touch timer recording or a timer recording is finished, the unit ejects the cassette tape. Press
[T-SET] on the remote control or [STOP/EJECT
C
A] on the unit, then press [VCR ] to activate the VCR function again.
• Once the unit turns to the timer standby mode, no VCR functions are available until [T-SET] is pressed.
• To cancel the timer standby mode, press [T-SET] on the remote control or [STOP/EJECT
C
A] on the unit, then press [VCR ] to activate
the VCR function again.
When an one-touch timer recording or a timer recording is completed...
• If auto power off for DVD has been activated and there are timer recordings on standby, the unit turns off automatically, and
indicator on this unit lights to indicate the unit is in the timer standby mode.
•
indicator on this unit flashes if there are no more timer recordings on standby.
• If auto power off for DVD has NOT been activated, the unit goes to the DVD mode and all the VCR functions will be unavailable. All the
DVD functions are available during one-touch timer recording, timer standby mode and timer recording.
•
Press [STOP/EJECT
• Press [OUTPUT] on this unit or [VCR ] on the remote control to use the VCR when the unit is turned on. In case timer recording is in
standby mode, press [STOP/EJECT A] on this unit or [T-SET] on the remote control, and then press [OUTPUT] on this unit or
[VCR ] on the remote control.
C
A
]
on this unit or [T-SET] on the remote control to use the VCR when the unit is turned off.
C
If you want to use the DVD player during a timer recording or while indicator on this unit is on or blinking.
• Press [POWER] to turn on the unit. Press [DVD ] on the remote control to choose DVD mode, then continue with the other DVD
features as described in this manual.
Note for timer recording:
•
If there is a power failure or the unit is unplugged for more than 30 seconds, clock setting and all timer programs will be lost.
–
–
13
EN
Satellite Link
You can set the unit to start recording whenever it detects a video signal from the external tuner.
Preparing for the Satellite Link Timer Recording:
Preparation on the tuner
Preparation on this unit
• Satellite link accepts only the connection from L1 (rear) with the
external tuner. (The connection from L2 cannot read any signals
from the cable/satellite box.)
L1
external tuner
DVD
AUDIO
OUT
DVD/VCR
AUDIO OUT
VCR
COMPONENT
VIDEO OUT
S-VIDEO
OUT
DIGITAL
AUDIO OUT
Y
C
L
•
The external tuner should be equipped with some kind of timer
function. Using timer function of the tuner, set it to output audio/video
signals when it comes to the time you want to start recording, and
stop output audio/video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to set the timer.
AUDIO IN
VIDEO IN
L
/
/
PB
B
R
COAXIAL
VIDEO OUT
R
C
PR
R
RCA audio/video cables
• Make sure to turn off the tuner when you finish setting.
VCR
Press [SPEED] to select the desired tape speed.
Set the desired start minutes.
If you wish to go back to the left, press [s ].
SATELLITE LINK
1
5
6
SPEED
Tape speed
Type of tape
SP mode
Recording / playback time
T60
0 1
:
0 0 PM
T120
T160
2-2/3hours
8hours
1hour
3hours
2hours
6hours
or
SP
SLP mode
In stop mode, press [SETUP].
Press [B] to set satellite link standby mode.
SATELLITE LINK
2
3
SETUP
0 1
:
3 0 PM
[ON]
- M E N U -
Select “SATELLITE LINK”.
Then press [B] to go to next step.
TIMER PROGRAMMING
SATELLITE LINK
B
•
indicator on this unit lights up and the unit goes to the DVD
mode. If you do not use DVD function, turn off the unit.
AUTO REPEAT
CLOCK SET
[OFF]
LANGUAGE SELECT
or
• Satellite unit must be turned on for VCR satellite link to start.
If cable/satellite box is not set to output signals, satellite link will
remain in standby mode.
Set the desired start hour.
Then press [B] to go to next step.
SATELLITE LINK
4
To cancel the satellite link function in standby mode:
1 2
:
0 0 AM
Press [T-SET] on the remote control or [STOP/EJECT
unit.
C
A] on this
or
To cancel the satellite link function while the satellite link
recording is in progress:
• The hour can be selected from 1-12 with AM or PM.
• When the external tuner signal is stopped, recording will be stopped.
Press [STOP/EJECT
C
A] on this unit.
Note:
• If you have not set the clock, “CLOCK SET” menu will appear at step 2. Refer to “Clock Setting” on page 8.
• You cannot set the ending time for the satellite link timer recording on this unit.
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.
• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.
e.g.) In case of the satellite link timer recording is overlapped
on the existing timer recording.
e.g.) In case of the timer recording is programmed in the middle
of the satellite link timer recording
e.g.) In case of the timer recording is overlapped on the existing
satellite link timer recording.
timer recording
satellite link
timer recording
satellite link
timer recording
satellite link
recording result
recording result
recording result
Copying a Cassette Tape
Warning: Unauthorized recordings of copyrighted cassette tapes
output jacks of
rear of the unit
L1
may be an infringement of copyright laws.
external device
AUDIO OUT
L
DVD/VCR
AUDIO OUT
VCR
1) Insert a pre-recorded cassette tape into another external
device for playback.
2) Insert a recordable cassette tape into this unit for recording.
3) Press [SPEED] on the remote control to select recording
speed (SP or SLP).
4) Press [INPUT SELECT] on the remote control to select L1 or
L2. Choose L1 if device is connected to rear input jacks, or L2
if connected to the front. Refer to “Front & Rear Terminals” on
page 9 for more details.
RCA audio/video
cables
or
L
AUDIO IN
VIDEO IN
R
R
VIDEO OUT
VIDEO OUT
You can use a video disc player, cable/satellite box or other audio/video
component with audio/video output jacks.
Note:
• For best results during dubbing, use buttons on this unit whenever
possible. The remote control might affect another device’s operation.
• Always use video-quality shielded cables with RCA-type connectors.
Standard audio cables are not recommended.
5) Press [REC/OTR] on the unit.
6) Press “PLAY” button on the external device.
7) To stop recording, press [STOP/EJECT
C
A] on this unit,
• L2 input jacks are on the front of this unit.
then stop playback of the external device.
–
–
14
EN
DVD FUNCTIONS
Playback
Before:
Turn on the TV, amplifier and any other
components which are connected to this
unit. Make sure the TV and audio receiver
POWER
OPEN/CLOSE
SPEED
T-SET
POWER
OPEN/CLOSE
1
1
4
7
2
5
8
3
6
9
TRACKING
are set to the correct channel.
DVD
REC
TIMER REC
VCR
DVD
P-SCAN
PLAY
CLEAR/
INPUT
SELECT
VIDEO
AUDIO
C. RESET
0
VCR
+10
DVD
DISPLAY
MODE
REW
F.FWD STOP/EJECT PLAY REC/OTR
TRACKING
OUTPUT
REV/SKIP STOP
PLAY SK
(
1
on page 16
)
3
4
PLAY
STOP
Insert a disc with
label facing up.
1
1
2
4
3
Lights up when power is on.
2
OPEN/CLOSE
POWER
Note:
• When you play a CD-RW/-R with MP3 files, details on page 16.
“
”
•
may appear at the top-right on the TV screen when the operation is prohibited by
the disc or this unit.
• Some DVD may start playback from title 2 or 3 due to specific programs.
• During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st
layer is being switched to the 2nd layer. This is not a malfunction.
To start playback
To stop playback
3
4
STOP
PLAY
• You can change the on-screen language for DVD function in “PLAYER MENU”. Refer to page 20.
Disc Menu
Fast Forward / Reverse Search
DVD
DVD
E
1
Some discs contain menus which describes the contents of the
disc or allow you to customize DVD playback, or title menu which
lists the titles available on the DVD.
Press [MENU] to call up the disc menu or press [TOP MENU] to
call up the title menu. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Press [g] or [h] repeatedly during playback to
select the required forward or reverse speed.
To use [SKIP H / REV], [G SKIP / FWD] on this unit
Pressing and holding [SKIP
H
/ REV] or
[G
SKIP / FWD] on this unit
will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Note:
Note:
•
For DVD, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x), 5(100x).
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for details.
• For audio CD and MP3, approximate speed is 1(2x), 2(8x), 3(30x).
Resume Playback
Slow Forward / Reverse Search
DVD
DVD
1
Press [STOP C] during playback. Resume message will appear on
the TV screen.
Press [g] or [h] repeatedly in the pause mode to
select the required forward or reverse speed.
To use [SKIP H / REV], [G SKIP / FWD] on this unit
Press [PLAY B]. Playback will resume
from the point at which playback was
Resume ON
Pressing and holding [SKIP
H
/ REV] or
[G
SKIP / FWD] on this
stopped.
Press 'PLAY' to play from here.
To play the beginning,
unit in the pause mode will also change forward or reverse
playback speed.
To continue playback, press [PLAY B].
press 'STOP' first and then 'PLAY'.
e.g.) DVD
Note:
• To cancel resume, press [STOP C] one more time in the stop mode.
• For MP3, playback will resume from the beginning of the file at which
playback was stopped.
Note:
• Slow forward or reverse speed is different depending on the disc. Ap-
proximate speed is 1(1/16x), 2(1/8x), 3(1/2x).
• The resume information will be kept when the unit is turned off.
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in the slow
playback mode are blurred. Refer to pages 20-21.
Paused and Step-by-Step Playback
Zoom
DVD
DVD
Press [PAUSE F] during playback.
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom factor:
2x, 4x or off.
To continue playback, press [PLAY B].
DVD
x2
x4
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
3) Press [K / L / s / B] to slide the zoomed picture across the TV
screen.
Note:
• For DVD, set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in
the pause mode are blurred. Refer to pages 20-21.
Note:
• Zoom function does not work while the disc menu is displayed.
• 4x zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or [h]
repeatedly in the zoom mode.
To use [SKIP H / REV], [G SKIP / FWD] on this unit
DVD
Press once to skip chapters, tracks or titles to a desired point.
• In the zoom mode, it automatically changes
position guide.
2x (4x) to the zoomed
–
–
15
EN
MP3 Playback
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the computer and play back the files on this unit.
DVD
Insert a CD-RW/-R with MP3 files, the file list will automatically
appear on the TV screen. Press [MENU] when you want to call up
the file list again while CD-RW/-R with MP3 files is already inserted.
Note:
When selecting the folder:
FILE LIST
1
DISC NAME
FOLDER
MP3
3
•
Depending on some sections, it may take a while to be recognized.
folder name
folder name
folder name
1
2
3
4
ENTER
• Press [TOP MENU] to return to the first item.
• Folders and MP3 files are displayed respectively as
folder name
3
or
file name
file name
file name
1
2
3
3
3
PLAY
3
and
.
ENTER
PLAY
1/
2
folder name
1
• A maximum of 255 folders or 999 files may be recognized on one disc.
• Up to 8 hierarchies can be recognized in one folder. File in the 9th or
deeper hierarchies cannot be played back.
This unit recommends files recorded under the following circum-
stances:
• Press [B] when you want to go to the next hierarchy.
• Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 32kbps ~ 320kbps
• For MP3 file recorded in VBR (variable bit rate), the unit may not display the
actual elapsed time.
Press [STOP C] once to stop MP3
2
playback temporarily.
STOP
Refer to “Resume Playback”
on page 15.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
DVD
DVD
appears only in a case multi-
angle is available on the DVD.
DISPLAY
DISPLAY
current playback status
current playback status
4/12 0:03:21 - 0:02:15
T
1
2
11/16 0:00:00 - 0:03:30
1
remaining time of the current track
elapsed time of the current track
current track number / total tracks
remaining time of the current
chapter
DISPLAY
elapsed time of the current
chapter
ALL:
current track number / total tracks
CH(Chapter):
current chapter number /
total chapters
4/12 0:13:45 - 0:45:40
T
current repeat setting, if active
DISPLAY
T:
Track repeat
A: All Tracks repeat
B: A-B repeat
A
1/3 0:00:00 - 1:23:45
2
3
remaining time of the entire disc
elapsed time of the entire disc
remaining time of the current title
elapsed time of the current title
DISPLAY
TT(Title):
current title number / total titles
3
DISPLAY
Note:
layer numbers, appears only when
playing a two-layered disc.
• When you are playing a disc in program or random mode,
T
L1
2
“
PROGRAM” (or “
RANDOM”) will be displayed instead of
.
L0:
L1:
Layer 0 is playing
Layer 1 is playing
DVD
current repeat setting, appears
only when the repeat setting is
active.
DISPLAY
current playback status
C: Chapter repeat
T:
Title repeat
B: A-B repeat
TRACK 01
1
2
A
the name of the file currently in
play will be displayed.
bit rate: the amount of audio and
video data currently being read
DISPLAY
DISPLAY
TR(Track):
current track number / total tracks
1/36 0:01:15
T
current repeat setting, if active
4
T:
Track repeat
G: Group (folder) repeat
A: Disc repeat
elapsed playing time of the
current track
DISPLAY
PROGRAM
RANDOM
3
or
(Only when you are playing a disc in program or random mode.)
DISPLAY
4
–
–
16
EN
Search Functions
Search function does not work during programmed or random playback.
Using Track Search
Using Time Search
DVD
DVD
Press [SEARCH MODE].
Press [SEARCH MODE] repeatedly until the time search menu
1
2
1
appears.
SEARCH
MODE
SEARCH
MODE
/29
TOTAL 1:29:00
PLAY
Select a desired disc time by using [the Number buttons] within 30
Select track number by using [the Number buttons] within 30 seconds.
2
seconds.
1
4
7
2
5
8
0
3
1
4
7
2
5
8
0
3
6
6
TOTAL 1:29:00
/29
9
9
+10
+10
•
•
For the disc with less than 10 tracks, press the track number directly.
For discs with more than 10 but less than 99 tracks, to play back single-
digit track, press [0] first, then the track number (e.g., for track 3, press
[0], [3]). To play back a double-digit track, press the track number.
For discs with more than 100 tracks, to play back a single or a double-
digit track, press [0] first, then the track number (e.g., for track 3, press
[0], [0], [3], and for track 26, press [0], [2], [6]). To play back a triple-digit
track, press the track number.
Note:
• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the time search menu if the total
time of the title or track is less than 10 minutes.
•
• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.
• For audio CD, time search is not available for programmed and random
playback.
Using [SKIP H, G]
Marker Setting
Press [SKIP H, G] during playback.
1
DVD
Current Track
(TR)
SKIP
This function allows you to assign a specific point on a disc to be
called back later.
TR 1 TR 2 TR 3 TR 4
PLAY
SKIP
SKIP
To set a marker
Press [SEARCH MODE] repeatedly until marker search menu
1
Note:
appears.
• [+10] can also bring the track search display, except for the disc with
less than 10 tracks. For such a disc, track search can be performed by
just pressing the track number.
SEARCH
MODE
PLAY
• For audio CD and MP3, track search is not available for programmed
and random playback.
Select a marker.
2
or
Using Title / Chapter Search
Press [ENTER].
3
DVD
ENTER
Press [SEARCH MODE] once for the chapter search.
Press [SEARCH MODE] twice for the title search.
1
To return to the marker later
SEARCH
MODE
/12
Press [SEARCH MODE] repeatedly until marker search menu
1
appears.
PLAY
SEARCH
MODE
Select title/chapter number by using [the Number buttons]
within 30 seconds.
2
Select the marker.
1
4
7
2
5
8
0
3
2
6
or
/12
9
+10
Press [ENTER] at the desired marker.
3
ENTER
Using [SKIP H, G]
Press [SKIP H, G] during playback.
1
Current Chapter
(CH)
To exit the marker search menu
CH 1 CH 2 CH 3 CH 4
SKIP
RETURN
Press [RETURN ].
1
SKIP
SKIP
SKIP
PLAY
or
Current Title
(TT)
Note:
• Marker search menu will disappear in about 30 seconds when there is
no output.
TT 1 TT2 TT3 TT4
SKIP
• To clear a marker, select the marker to be cleared at step 2 in the
section “To set a marker” or “To return to the marker later” and then
press [CLEAR/C.RESET].
• Opening the disc tray or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To return to
the marker later” will also erase all markers.
(If the disc has no chapters)
Note:
• Depending on the disc being played back, this function can also be
performed by directly entering the desired chapter number with
[the Number buttons]. Refer to the manual accompanying the disc.
–
–
17
EN
Repeat / Random / Programmed Playback
Repeat Playback
Random Playback
DVD
DVD
This function shuffles the playing order of tracks instead of playback
in sequence.
You can repeat playback chapters, titles or tracks on a disc.
Repeat function is available only during playback.
Press [MODE] twice.
Press [REPEAT] during playback.
RANDOM
1
1
CD-DA
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
REPEAT
MODE
STOP
PLAY
PLAY
e.g.) DVD
e.g.) CD
Each time you press [REPEAT], repeat function changes as exam-
ple below.
Press [PLAY B] to start random playback.
2
PLAY
(repeat off)
OFF
(current chapter repeat)
(current title repeat)
(repeat off)
CHAPTER
TITLE
OFF
Note:
• To repeat the current track in the random mode, press
[REPEAT] repeatedly until “ TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly until
“
ALL” appears during playback.
• During random playback, you cannot go back to the previous track.
(current track repeat)
(entire disc repeat)
TRACK
ALL
Programmed Playback
DVD
OFF
(repeat off)
You may determine the order in which tracks will play back.
TRACK
GROUP
ALL
(current file repeat)
(current folder repeat)
(entire disc repeat)
Press [MODE] once.
1
CD-DA
TOTAL 0:00:00
MODE
STOP
e.g.) CD
Note:
Using [K / L] to select desired track.
Press [ENTER].
2
3
CD-DA
TOTAL 1:03:30
• Repeat setting (except “ALL”) will be cleared when moving to another
title, chapter, track/file or folder.
1
5
3:30
5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
ENTER
• This function is not available with some discs or during repeat A-B
playback.
or
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program,
use [SKIP H, G] to see all the tracks.
• While an MP3 folder is open:
–Press [B] when you want to go to the next hierarchy.
–Press [s] when you want to go back to the previous
hierarchy (except for the top hierarchy).
Repeat A-B Playback
DVD
You can repeat playback between A and B on a disc.
Repeat function is available only during playback.
Press [PLAY B] to start programmed playback.
Press [A-B] at your desired starting point (A).
1
A-
A-B
PLAY
PLAY
Note:
Press [A-B] at your desired ending point (B).
• Press [CLEAR/C.RESET] at step 2 to erase the most recently entered
track.
2
A-B
A-B
• To erase all programmed tracks at once, select “ALL CLEAR’’ and press
[ENTER] at step 2.
• While a program is being played back, [STOP C] works as follows;
- Press [STOP C] and [PLAY B] next, so that the programmed
playback restarts. (CD playback restarts from the current point. MP3
playback restarts from the beginning of the current file.)
- Press [STOP C] twice and [PLAY B] next, so that playback restarts
from the first track in the original order. However, your programmed
playback can be restarted when you follow the above steps. (Your
programs are still stored until either the disc tray is open or power is
turned off.)
•
Point B should be in the same title or track as point A.
Note:
• To exit the sequence, press [A-B] so that “OFF” appears.
• To cancel point A, press [CLEAR/C.RESET] at step 1.
• This function is not available in the other repeat modes.
• To repeat the current track in the program, press [REPEAT] repeatedly
until
appears during playback.
“
TRACK’’
• To repeat the entire program, press [REPEAT] repeatedly until
ALL’’ appears during playback.
“
–
–
18
EN
Special Settings
Subtitle Language
Camera Angles
DVD
DVD
This unit allows you to select a subtitle language (if available)
during DVD playback.
Some DVD may contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle if
If the “ANGLE ICON” is set to “OFF” in “OTHERS” menu,
will not appear. Refer to pages 20-22.
appears on the TV screen.
Press [SUBTITLE] during playback.
1
1.ENG/6
SUBTITLE
PLAY
Press [ANGLE] during playback.
Each time you press [SUBTITLE], subtitle language changes as
example below.
1
1 / 8
ANGLE
OFF
PLAY
(no subtitles)
Each time you press [ANGLE] or [s / B], camera angle changes.
ENG
FRE
(English subtitles)
(French subtitles)
Black Level Setting
DVD
Adjust the black level to make the dark
areas of the TV picture brighter.
To cancel subtitle
Press [MODE] during playback.
1
ON
MODE
Press [SUBTITLE] during playback.
1
PLAY
1.ENG/6
SUBTITLE
PLAY
ENTER
Press [ENTER] to
adjust the black level.
2
OFF
Press [s / B] to set subtitle to “OFF”.
2
ON: makes the dark areas brighter.
OFF: shows the original picture as recorded.
OFF
or
RETURN
Press [RETURN
] to exit.
3
Note:
• If your language is not shown after pressing [SUBTITLE] several times,
the disc may not have that language. However, some discs have the
subtitle language setting on the disc menu. (Operation varies depending
on the discs, so refer to the manual along with the disc.)
Stereo Sound Mode
DVD
This unit allows you to select a sound mode
during CD playback.
• When “NOT AVAILABLE” appears on the TV screen, it means no subtitle
is recorded on the scene.
Press [AUDIO ] during CD playback.
1
STEREO
• If you choose a language that has a 3-letter language code, the code will
be displayed every time you change the subtitle language setting. If you
choose any other languages, ‘---’ will be displayed instead. Refer to page 24.
• Some discs will only allow you to change the subtitle from the disc
menu. Refer to the manual accompanying the discs for details.
AUDIO
PLAY
Each time you press [AUDIO], sound mode changes as example below.
STEREO
(right and left channels are active)
Audio Language
L-ch
(left channel is active)
DVD
R-ch
(right channel is active)
This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.
Virtual Surround
Press [AUDIO ] to change audio language.
1
DVD
1.ENG Dolby D 3/2.1ch 48k/3
AUDIO
PLAY
You can enjoy virtual surround sound on your existing 2 channel
stereo system.
Each time you press [AUDIO ], the audio language changes as
example below.
Press [MODE] twice (once for CD and MP3) during playback.
1
ENG
SPA
FRE
(English audio)
(Spanish audio)
(French audio)
MODE
OFF
PLAY
Press [ENTER] for the desired effect.
2
3
ENTER
1
1: natural effect
2: emphasized effect
OFF: no effects (original sound)
RETURN
Note:
Press [RETURN
] to exit.
• If your language is not shown after pressing [AUDIO ] several times,
the disc may not have that language. However, some discs allow audio
language setting on the disc menu. (Operation varies depending on the
disc, so refer to the manual along with the disc.)
Note:
• For audio CD, virtual surround will not be effective if the sound mode is
set to something other than “STEREO”. Refer to “Stereo Sound Mode”.
• For DVD when playing back 96kHz with virtual surround function, the
sound will be down sampled to 48kHz.
• When “OFF” appears on the TV screen, it means audio language is not
available.
• Some discs will only allow you to change the audio setting from the
disc menu. Refer to the manual accompanying the discs for details.
–
–
19
EN
DVD
DVD Setting
QUICK Menu
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from “QUICK” menu quickly.
1 Press [SETUP] in the stop mode.
2 Select the desired item.
or
SETUP
STOP
SETUP
QUICK
ENGLISH
ENTER
SETUP menu
A
B
C
P20
P21
P21
Step 5
Step 5
Step 5
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
Confirm that “QUICK” is selected.
4:3 LETTER BOX
OFF
BITSTREAM
SETUP
QUICK
CUSTOM
INITIALIZE
ENTER
• Refer to the sections “PLAYER MENU”, “TV ASPECT”,
“PROGRESSIVE” or “DOLBY DIGITAL” section on page 20 or 21.
CUSTOM Menu
You can change the settings of the unit.
• QUICK on pages 20-21 indicates DVD setting menus also accessible from “QUICK” menu.
1 Press [SETUP] in the stop mode.
2 Select “CUSTOM”.
3 Select the desired item.
ENTER
SETUP
STOP
or
or
SETUP menu
ENTER
SETUP
CUSTOM
SETUP
SETUP
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
LANGUAGE menu
OTHERS menu
DISPLAY menu
AUDIO menu
PARENTAL menu
SETUP
LANGUAGE
SETUP
DISPLAY
SETUP
PARENTAL
SETUP
OTHERS
SETUP
AUDIO
PASSWORD
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
ANGLE ICON
AUTO POWER OFF ON
ON
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
Please enter a 4-digit password.
SUBTITLE
DISC MENU
PLAYER MENU
page 20
page 21
page 21
page 22
page 22
A
B
C
D
E
LANGUAGE Setting
A
Follow steps 1 to 3 in the “CUSTOM Menu” section above.
5 Select the desired language.
4 Select the desired item.
ENTER
6 To exit the menu
SETUP
ENTER
or
or
AUDIO: *1 *2
(Default: ORIGINAL)
Sets the audio language.
LANGUAGE menu
AUDIO
Note:
ORIGINAL
ENGLISH
FRENCH
SETUP
LANGUAGE
*1
• Language options are not available
with some discs.
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
PLAYER MENU
SUBTITLE: *1 *2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
• If “OTHER” is selected on “AUDIO”,
“SUBTITLE” or “DISC MENU” screen,
press 4-digit number to enter the code
for the desired language. Refer to the
“Language Code List” on page 24.
• Only the languages supported by the
disc can be selected.
DISC MENU: *1
(Default: ENGLISH)
Sets the language for DVD
menu.
DISC MENU
ENGLISH
FRENCH
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”, “PROGRES-
SIVE” or “DOLBY DIGITAL” are
available. “QUICK “ menu consists
of the setting menu frequently
used, and they are accompanied
with QUICK . You can make all
settings in “CUSTOM” menu.
SPANISH
PLAYER MENU: QUICK
(Default: ENGLISH)
Sets the language for the
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
*2
• “LANGUAGE” setting for “AUDIO” and
“SUBTITLE” are not available with some
discs. Then use [AUDIO ] and
[SUBTITLE]. Refer to page 19.
on-screen display.
–
–
20
EN
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
6 To exit “TV ASPECT” or “STILL
4 Select the desired item.
5
MODE” menu
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
Select the
desired
setting.
SETUP
or
TV ASPECT
ENTER
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
OFF
To complete
“PROGRESSIVE” setting
or
ENTER
DISPLAY menu
ENTER
SETUP
DISPLAY
STILL MODE:
(Default: AUTO)
See note on the right.
Select the
desired
setting.
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
STILL MODE
Note:
ENTER
TV ASPECT
STILL MODE
PROGRESSIVE OFF
4:3 LETTER BOX
AUTO
AUTO
FIELD
FRAME
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear
on the top and bottom of the
TV screen.
or
ENTER
Note:
• Select “4:3 PAN & SCAN” for a
full height picture with both
sides adjusted.
PROGRESSIVE: QUICK
(Default: OFF)
See note on the left.
PROGRESSIVE:
• You can set “PROGRESSIVE” to
“OFF” in “DISPLAY” menu or
press and hold [PLAY B] on this
unit for more than 5 seconds
during playback until the PRO-
GRESSIVE SCAN indicator on this
unit turns off.
• When “PROGRESSIVE” is “ON”,
video signals from the unit’s
VIDEO OUT and S-VIDEO OUT
jacks will be distorted or not be
output at all.
• Select “16:9 WIDE” if a wide-
screen TV is
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
AUTO
OFF
4:3 LETTER BOX
AUTO
ON
SETUP
connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, it
automatically selects the
best resolution setting
(“FRAME” or “FIELD”) based
on the data characteristics of
the pictures. (default)
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on
the TV screen is called a
“frame”, which consists of
two separate images called
as “field”.
ENTER
If there is no picture
or you do not press
any buttons for 15
seconds, “PROGRES-
SIVE” will switch to
“OFF” and it will exit
the “SETUP” menu.
Before proceeding…
Select “Yes”.
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
or
Activate Progressive?
NO
YES
SELECT:
K
/
L
SET:ENTER
Note:
ENTER
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
“PROGRESSIVE” or “DOLBY
DIGITAL” are available. “QUICK”
menu consists of the setting
menu frequently used, and they
are accompanied with QUICK
You can make all settings in
“CUSTOM” menu.
Select “Yes”.
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
• Some pictures may be
blurred if you select “AUTO”
in the still mode due to their
data characteristics.
or
NO
YES
.
SET:ENTER
SELECT:
K
/
L
AUDIO Setting
C
Choose the appropriate audio setting for your device. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the
“CUSTOM Menu” section on page 20.
5
6 To exit the menu
4 Select the desired item.
DRC (Dynamic Range Control):
(Default: ON)
SETUP
Set to “ON” to compress the range between soft and loud sounds.
or
DRC
ON
OFF
DOWN SAMPLING ON
ON
DOLBY DIGITAL
BITSTREAM
BITSTREAM
Note:
ENTER
DRC:
AUDIO menu
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
SETUP
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
Set to “OFF” when outputting the original sound.
DOWN SAMPLING:
• When playing back a 96kHz
disc with the copyright
protection, or when virtual
surround is set to “1” or “2”,
the sound will be down
sampled at 48kHz even if the
“DOWN SAMPLING” is set to
“OFF”.
DRC
ON
ON
OFF
BITSTREAM
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
BITSTREAM: outputs Dolby Digital signals.
PCM: converts the Dolby Digital into PCM (2 channel).
Note:
• In “QUICK” menu, “PLAYER
MENU”, “TV ASPECT”,
•
This function is available only
on digital outputting of a disc
recorded in 96kHz.
•
•
“PROGRESSIVE” or “DOLBY
DIGITAL” are available. “QUICK”
menu consists of the setting
menu frequently used, and they
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
ON
ON
PCM
are accompanied with QUICK
You can make all settings in
“CUSTOM” menu.
.
ENTER
–
–
21
EN
PARENTAL Setting
D
Parental setting prevents your children for viewing inappropriate materials. (password protected)
Parental Levels
Parental level allows you to set the rating levels of your DVD software. Playback will stop if the ratings exceed the levels you set. Follow
steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4 Enter your desired 4-digit
5 Select “PARENTAL
6 Select the desired level.
7 To exit the menu
password (expect for 4737).
LEVEL”.
SETUP
1
4
7
2
5
8
0
3
6
or
or
ENTER
ENTER
ENTER
PARENTAL LEVEL
ALL
9
PARENTAL LEVEL
PASSWORD CHANGE
ALL
8 [ADULT]
7 [NC-17]
6 [R]
+10
PARENTAL menu
CONTROL LEVELS
• ALL:
SETUP
PARENTAL
all parental locks are canceled.
PASSWORD
• Level 8:
• Levels 7 to 2:
• Level 1:
DVD software of any grades (adult/general/children) can be played back.
only DVD software intended for general use and children can be played back.
only DVD software intended for children can be played back, with those intend-
ed for adult and general use prohibited.
Please enter a 4-digit password.
TIPS FOR LEVELS
• 8 [ADULT]:
• 7 [NC-17]:
or
DVD software of any grades (adult/general/children) can be played back.
no one under 17 admitted
If you have set a password
already, enter the current 4-digit
password.
• 6 [R]: restricted; under 17 requires accompanying parent or adult guardian
• 5 [PGR]:
• 4 [PG13]:
• 3 [PG]:
parental guidance recommended
unsuitable for children under 13
parental guidance suggested
general audience
SETUP
PARENTAL
• 2 [G]:
PASSWORD
• 1 [KID SAFE]:
suitable for children
Enter current password.
Note:
• Some DVD-video may not respond to “PARENTAL“ setting. Make sure this function works with
your DVD-video.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4 Enter current 4-digit password.
5 Select “PASSWORD
6 Enter your new
4-digit password (except
for 4737).
7 To exit the menu
CHANGE”.
SETUP
1
4
7
2
5
8
0
3
6
or
1
4
7
2
5
8
0
3
6
ENTER
ENTER
9
Note:
9
PARENTAL LEVEL
PASSWORD CHANGE
ALL
+10
• Record the password in
case you forget it.
+10
• If you forget the
PARENTAL menu
password, press [4],
[7], [3], [7] at step 4,
then enter your new
password. Password will
be cleared and parental
levels will be set to “ALL”.
SETUP
PASSWORD
Please enter a 4-digit password.
PARENTAL
SETUP
PARENTAL
PASSWORD
Enter current password.
OTHERS Setting
E
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4 Select the desired item.
5
6 To exit the menu
ANGLE ICON:
(Default: ON)
SETUP
Set to “ON” to display
when multiple camera angles are
available during DVD playback.
or
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
ON
ENTER
OTHERS menu
SETUP
OTHERS
AUTO POWER OFF:
(Default: ON)
ANGLE ICON
AUTO POWER OFF
ON
ON
Set to “ON” to turn this unit off automatically after 30 minutes of
no use.
ANGLE ICON
ON
ON
AUTO POWER OFF ON
OFF
ENTER
–
–
22
EN
Reset to the Default Setting (Except for PARENTAL Setting)
1 Press [SETUP] in the
2 Select “INITIALIZE”.
3 Select “YES”.
4 To exit the menu
stop mode.
SETUP
SETUP
ENTER
ENTER
STOP
or
or
SETUP menu
Press
twice.
Note:
SETUP
SETUP
INITIALIZE
SETUP
•
When you do not wish
to initialize, select
“NO” at step 3.
QUICK
CUSTOM
INITIALIZE
Initialize?
NO
YES
QUICK
CUSTOM
INITIALIZE
INFORMATION
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this manual. Refer to the following:
Problem Corrective action
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond to the
remote control.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
•
Aim the remote control directly at the infrared sensor window. If necessary, remove all the obstacles between the sensor and the remote control.
• You have to be within 23 feet (7m) of this unit.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of static. Turn up the volume, then if you hear some signal sound from
the radio in response to your pressing buttons on the remote control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working if you confirm infrared light
through the digital camera.
Poor picture or noise.
• Interference signal may be received. Change the position and direction of the unit.
Cannot record a TV program.
• This unit does not have a tuner to receive TV broadcasting.
• You must connect this unit to TV with audio/video output jacks or an external tuner to record TV programs. Refer to “Recording & One
-touch Timer Recording (OTR)” on page 12 and “Satellite Link” on page 14.
Timer recording is impossible.
• Make sure the timer program is set correctly.
• Make sure indicator on this unit lights up. If not, press [T-SET].
• Make sure the VCR clock is set correctly.
Cannot go into record mode.
• Make sure the cassette tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press [VCR
] on the remote control so that the VCR OUTPUT light will illuminate.
Playback picture is partially noisy.
•
Adjust tracking control for a better picture by pressing [TRACKING L / K]] on the unit or [TRACKING K / L] on the remote control.
Cannot view a picture but the
audio is OK.
• Head cleaning may be necessary. Refer to “Auto Head Cleaning”.
• Make sure the VCR is not in the VCR menu mode.
No or poor, playback picture.
• Fine tune your TV.
Video or color fades in and out when • You cannot copy a copyrighted cassette tape.
making a copy of a cassette tape.
Cannot remove the cassette tape. • Check if this unit is in the VCR mode. If not, press [VCR
] on the remote control to switch the mode.
No picture.
• Connect the video cable firmly.
• Insert a correct video disc that can be played back on this unit.
• Press [DVD ] on the remote control. Check if the DVD OUTPUT light will illuminate. Then try other DVD features.
• Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and you are using the component
video connections between the unit and the TV. Disable progressive scan for all other connections. Refer to page 6.
Disc cannot be played back.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No sound.
• Connect the audio cables firmly.
• Turn on the power of the audio component.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output.
Distorted picture.
• This unit does not support DTS audio.
-This is not a malfunction.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction. Refer to page 15.
• Check if the progressive mode is set correctly according to your TV. Refer to pages 20-21.
Audio or subtitle language does
not match the setting.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot be
changed.
• The DVD does not contain sequences recorded from different camera angles.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“
” appears on the TV screen,
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
prohibiting an operation.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
–
–
23
EN
Specifications
• Designs and specifications are subject to
change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Video heads :
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
4-heads
Output signal format :
NTSC color
W : 17 3/16”
(435mm)
(94mm)
(233mm)
H
D
: 3 3/4”
: 9 3/16”
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
21W (standby : 3.8W)
Weight :
Approx 5.8lbs (2.6kg)
Language Code List
Language
Code
Language
Code
Language
Code
Language
Code
A-B
French [FRE]
Frisian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Slovak [SLO]
Slovenian
Somali
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Malayalam
Maltese
Maori
Spanish [SPA]
Sundanese
Swahili
Marathi
Moldavian
Mongolian
Nauru
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
Hindi
Hungarian [HUN]
O-R
I-K
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Bulgarian [BUL]
Burmese
Byelorussian
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
U-Z
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Sindhi
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Singhalese
If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the audio or subtitle language setting on page 19. If you choose any
other languages, ‘---’ will be displayed instead. (3-letter language code is written in bracket.)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event
of defect in materials or workmanship as follows:
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS
DURATION:
FOR
A
PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY
PARTS: FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase.
Certain parts are excluded from this warranty.
FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY
AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN
THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
LABOR: FUNAI CORP. will provide the labor without charge for a period of
ninety (90) days from the date of original retail purchase.
IMPORTANT:
LIMITS AND EXCLUSIONS:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF,
AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
This warranty is extended only to the original retail purchaser. A purchase
receipt or other proof of original retail purchase will be required together with
the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
ATTENTION:
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unau-
thorized service center. This limited warranty does not apply to any product
not purchased and used in the United States.
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF
THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
This product is produced for home use and this warranty only covers failures
due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused
by repairs, alterations or product not supplied by FUNAI CORP., or damage
which results from accident, misuse, abuse, mishandling, misapplication, altera-
tion, faulty installation, improper maintenance, commercial use such as hotel,
rental or office use of this product or damage which results from fire, flood,
lightning or other acts of God.
To obtain warranty service, you must take the product, or deliver the product
freight prepaid, in either its original packaging or packaging affording an equal
degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service
providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORPORATION
Customer Service
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
Tel :1-800-844-5001
19900 Van Ness Avenue, Torrance, CA 90501
–
–
24
EN
Español
Conexiones
Ajuste del reloj
5
1
VCR
Consulte la “Basic TV Connection” en la página delantera antes
de utilizar esta unidad.
Pulse [SETUP] para seleccionar “AJUSTE DE RELOJ”.
A continuación, pulse [B] para ir al siguiente paso.
1
Instalación de las pilas del control remoto
2
- M E N U -
PROGRAMAR
SETUP
CONEXIÓN SATÉLITAL
AUTOREPETIR [OFF]
AJUSTE DE RELOJ
SELEC. IDIOMA
o
1
2
3
B
• Si no se ha ajustado el reloj, aparece la pantalla “AJUSTE DE
RELOJ” cuando pulse [SETUP]. En este caso, vaya al paso 2.
Seleccione el mes actual.
A continuación, pulse [B] para ir al siguiente paso.
2
3
4
5
6
Conmutación VCR/DVD
3
AJUSTE DE RELOJ
DIA
MES
1 0
AÑO
- - - -
OPEN/CLOSE
POWER
OPEN/CLOSE
TRACKING
/
- -
SPEED
T-SET
o
HORA MINUTO
- - - -
AM/PM
- -
1
4
7
2
5
8
3
6
9
VCR
DVD
P-SCAN
PLAY
:
TRACKING
OUTPUT
REV/SKIP STOP
PLAY SKIP/FWD
CLEAR/
INPUT
SELECT
C. RESET
0
VCR
+10
DVD
DISPLAY
MODE
Botón VCR
Botón DVD
Seleccione el dia actual.
A continuación, pulse [B] para ir al siguiente paso.
PLAY
STOP
SKIP
Luz DVD OUTPUT
REC/OTR
PAUSE
AUDIO
VCR
DVD
Luz VCR OUTPUT
Botón OUTPUT
AJUSTE DE RELOJ
DIA
SEARCH
MODE
TOP MENU
MENU
ENTER
MES
1 0
AÑO
- - - -
/
0 2
SETUP
ZOOM
RETURN
A-B
OUTPUT
o
SUBTITLE
ANGLE
REPEAT
HORA MINUTO
- - - -
AM/PM
- -
:
Seleccione el año actual.
A continuación, pulse [B] para ir al siguiente paso.
MODO VCR
AJUSTE DE RELOJ
DIA
MES
1 0
AÑO
2 0 0 7
Pulse [VCR ] en el control remoto. (Compruebe que está
encendida la luz VCR OUTPUT.)
/
0 2
o
HORA MINUTO
- - - -
AM/PM
- -
:
MODO DVD
Pulse [DVD ] en el control remoto. (Compruebe que está
encendida la luz DVD OUTPUT.)
Seleccione la hora actual.
A continuación, pulse [B] para ir al siguiente paso.
AJUSTE DE RELOJ
DIA
MES
1 0
AÑO
/
0 2 MAR 2 0 0 7
Activación de la unidad por primera vez
4
o
HORA MINUTO
0 5 - -
AM/PM
- -
:
VCR
Seleccione los minutos actuales.
A continuación, pulse [B] para ir al siguiente paso.
Asegúrese de que la entrada de su TV esté en VIDEO
(El nombre puede cambiar según el fabricante del TV.
Consulte el manual de su TV para conocer más detalles.)
1
2
AJUSTE DE RELOJ
DIA
MES
1 0
AÑO
/
0 2 MAR 2 0 0 7
Seleccione su idioma la primera vez que encienda esta unidad.
A continuación, pulse [B] para ir al siguiente paso.
SELEC. IDIOMA
o
HORA MINUTO
AM/PM
- -
0 5
:
4 0
POWER
ENGLISH
FRANCAIS
ESPAÑOL
o
Seleccione “AM” o “PM”.
AJUSTE DE RELOJ
DIA
B
[ON]
7
8
MES
1 0
AÑO
/
0 2 MAR 2 0 0 7
o
HORA MINUTO
0 5 4 0
AM/PM
P M AM
B PM
:
Cuando “AJUSTE DE RELOJ” aparesca,
avance al segundo paso de “Ajuste del reloj”
en esta pagina.
3
AJUSTE DE RELOJ
MES
1 0
DIA
- -
AÑO
- - - -
/
Presione [SETUP] para salir del menú “AJUSTE DE RELOJ”.
HORA MINUTO
- - - -
AM/PM
- -
o
:
SETUP
–
–
25
ES
Español
Modo DVD
Modo de grabadora de video
Reproducción de la
grabadora de vídeo
6
Soporte
Botón
(Orden alfavético)
1
4
7
2
5
8
0
3
6
Antes:
• Para seleccionar directamente el • Para seleccionar directamente la
capítulo o el título.
canción.
9
Encienda el televisor.
+10
VCR
• Para buscar en avance/
retroceso en un disco.
• Para empezar la reproducción en
avance/retroceso lento durante el
modo de pausa.
• Para el avance/retroceso de una
cinta.
• Para empezar la reproducción en
avance lento durante el modo de
pausa.
• Para buscar en avance/
retroceso en un disco.
Inserte un casete
de vídeo en esta
unidad.
Para empezar la
reproducción
1
2
4
A-B
• Para repetir entre los puntos A y • Para repetir entre los puntos A y
B elegidos.
B elegidos. (CD)
ANGLE
AUDIO
• Para seleccionar los ángulos de la
cámara en un disco.
PLAY
• Para seleccionar el idioma de
audio en un disco.
• Para seleccionar “ESTÉREO”,
“L-ch” o “R-ch”. (CD)
• Para borrar los marcadores. (CD)
• Para eliminar el Nº de estado en
la entrada de programa.
• Para borrar los números
mal entrados.
• Para borrar el punto para la
repetición A-B. (CD)
Para parar la
reproducción
Para expulsar
• Para borrar los marcadores.
• Para borrar los números
mal entrados.
• Para borrar el punto para la
repetición A-B.
3
CLEAR/
C. RESET
• Para salir del menú de la
grabadora de vídeo.
• Para reponer el contador de cinta.
OPEN/CLOSE
STOP
DISPLAY
DVD
• Para indicar el modo de disco
actual.
• Para indicar el modo de disco
actual.
• Para indicar la hora actual, conta-
dor de cinta y L1 o L2.
• Para seleccionar el modo de
salida de DVD.
• Para activar el mando a
distancia en el modo DVD.
• Para seleccionar el modo de
salida de DVD.
• Para activar el modo DVD.
Reproducción de DVD/CD
7
• Para seleccionar un
ítem en el menú de la
grabadora de vídeo.
• Para avanzar al
siguiente menú de la
grabadora de vídeo.
• Para volver un paso
durante el ajuste del
reloj y temporizador.
Antes:
ENTER
Encienda el televisor, amplificador y otros
equipos que puedan estar conectados a
esta unidad. Asegúrese que el televisor y
el sintoamplificador de audio están en el
canal correcto.
• Para mover el cursor y
determinar su posición.
• Para mover el cursor y
determinar su posición.
INPUT
SELECT
• Para seleccionar L1 o L2.
MENU
MODE
• Para llamar la lista de archivo.
(MP3)
• Para llamar el menu en un disco.
• Para activar/desactivar el nivel del • Para disponer el orden de reproduc-
negro. ción o la reproducción aleatoria.
• Para activar/desactivar el ambien- • Para activar/desactivar el envol-
tal virtual. vente virtual.
DVD
OPEN/CLOSE
PAUSE
• Para abrir o cerrar la bandeja del • Para abrir o cerrar la bandeja del • Para expulsar la cinta de casete
Ponga un disco
con la etiqueta
hacia arriba.
disco.
disco.
del compartimiento del casete.
1
2
4
• Para hacer una pausa de repro-
ducción del disco.
• Para avanzar la reproducción un
cuadro a la vez.
• Para hacer una pausa de la
• Para hacer una pausa en la repro- reproducción o grabación de la cinta.
OPEN/CLOSE
POWER
ducción del disco.
• Para avanzar la reproducción un
cuadro a la vez.
• Para empezar la reproducción del • Para empezar la reproducción del • Para empezar la reproducción de
PLAY
disco.
disco.
la cinta.
POWER
• Para encender o apagar la uni-
dad.
• Para encender o apagar la uni-
dad.
• Para encender o apagar la uni-
dad.
REC/OTR
REPEAT
RETURN
• Para empezar una grabaciòn
una grabaciòn de un toque.
o
Para empezar la
reproducción
Para parar la
reproducción
3
• Para reproducir repetidamente
una canción o disco. (CD)
• Para reproducir repetidamente una
canción, grupo o disco. (MP3)
• Para reproducir repetidamente
un capítulo o título.
• Para activar/desactivar el modo
de repetición.
STOP
PLAY
• Para volver a la operación previa • Para volver a la operación previa
en el menú. en el menú.
• Para buscar un capítulo, título u • Para buscar una canción.
SEARCH
MODE
hora.
• Para buscar el tiempo. (CD)
• Para colocar o buscar los
marcadores. (CD)
• Para llamar el menú de búsqueda
de índice u hora.
• Para colocar o buscar los
marcadores.
Control remoto
8
SETUP
SKIP
• Para llamar el menú de
programación de DVD.
• Para llamar el menú de
programación de DVD.
• Para llamar el menú de la graba-
dora de vídeo.
POWER
OPEN/CLOSE
SPEED
T-SET
• Para saltar capítulos o titulo.
• Para saltar canciones.
1
4
7
2
5
8
3
6
9
TRACKING
SPEED
• Para seleccionar la velocidad de
grabación.
CLEAR/
INPUT
SELECT
C. RESET
• Para parar la reproducción o gra-
bación.
STOP
0
VCR
+10
DVD
• Para parar la reproducción.
• Para parar la reproducción.
DISPLAY
MODE
SUBTITLE
• Para seleccionar subtítulos en un
disco.
PLAY
STOP
SKIP
• Para volver al archivo superior
de la jerarquía más alta en el
programa y en la lista de archivo.
(MP3)
TOP MENU
REC/OTR
TOP MENU
MENU
PAUSE
AUDIO
• Para llamar el menú superior en
un disco.
SEARCH
MODE
ENTER
TRACKING
TRACKING
• Para ajustar manualmente
elseguimiento durante la repro-
ducción.
SETUP
ZOOM
RETURN
A-B
SUBTITLE
ANGLE
REPEAT
T-SET
• Para poner la grabadora de vídeo
en el modo de espera para una
grabación con temporizador.
• Para seleccionar el modo de salida
de la grabadora de vídeo.
• Para activar el modo de la graba-
dora de vídeo.
VCR
ZOOM
• Para ampliar parte de la
imagen. (2x/4x)
–
–
26
ES
Quick Use Guide
Clock Setting
Connections
1
5
VCR
Please refer to “Basic TV Connection” on the front page before
you use this unit.
Press [SETUP] and select “CLOCK SET“.
Then press [B] to go to next step.
- M E N U -
1
TIMER PROGRAMMING
SATELLITE LINK
Installing the Batteries for the Remote Control
AUTO REPEAT [OFF]
CLOCK SET
2
B
SETUP
LANGUAGE SELECT
or
1
2
3
• If the clock is not set, “CLOCK SET” menu appears when you press
[SETUP]. In this case, go to step 2.
Select the current month.
Then press [B] to go to next step.
CLOCK SET
2
3
4
5
6
7
8
MONTH DAY
1 0 - -
YEAR
/
- - - -
HOUR MINUTE
AM/PM
- -
- -
:
- -
or
VCR/DVD Switching
3
OPEN/CLOSE
POWER
OPEN/CLOSE
TRACKING
SPEED
T-SET
Select the current day.
Then press [B] to go to next step.
CLOCK SET
1
4
7
2
5
8
3
6
9
VCR
DVD
P-SCAN
PLAY
MONTH DAY
1 0 0 2
YEAR
- - - -
/
TRACKING
OUTPUT
REV/SKIP STOP
PLAY SKIP/FWD
CLEAR/
INPUT
SELECT
HOUR MINUTE
AM/PM
- -
C. RESET
or
0
VCR
+10
DVD
- -
:
- -
VCR button
DVD button
DISPLAY
MODE
PLAY
STOP
SKIP
DVD OUTPUT light
VCR OUTPUT light
OUTPUT button
REC/OTR
PAUSE
AUDIO
VCR
DVD
Select the current year.
Then press [B] to go to next step.
CLOCK SET
SEARCH
MODE
TOP MENU
MENU
MONTH DAY
1 0 0 2
YEAR
ENTER
/
TUE 2 0 0 7
SETUP
ZOOM
RETURN
A-B
OUTPUT
HOUR MINUTE
- - - -
AM/PM
- -
SUBTITLE
ANGLE
REPEAT
or
:
Select the current hour.
Then press [B] to go to next step.
CLOCK SET
MONTH DAY
1 0 0 2
YEAR
VCR MODE
/
TUE 2 0 0 7
HOUR MINUTE
0 5 - -
AM/PM
- -
Press [VCR ] on the remote control.
(The VCR OUTPUT light illuminates.)
:
or
DVD MODE
Select the current minute.
Then press [B] to go to next step.
CLOCK SET
Press [DVD ] on the remote control.
(The DVD OUTPUT light illuminates.)
MONTH DAY
1 0 0 2
YEAR
/
TUE 2 0 0 7
HOUR MINUTE
0 5 4 0
AM/PM
- -
:
or
Turning on Unit for the First Time
4
Select “AM” or “PM”.
CLOCK SET
VCR
MONTH DAY
1 0 0 2
YEAR
/
TUE 2 0 0 7
HOUR MINUTE
0 5 4 0
AM/PM
P M AM
B PM
or
:
Be sure your TV’s input is set to VIDEO. (Name may
vary with TV manufacturer. See your TV manual for
details.)
1
2
Press [SETUP] to exit the “CLOCK SET” menu.
Press [K / L] to select your on-screen language.
Then press [B] to continue.
SETUP
LANGUAGE SELECT
B
ENGLISH
FRANCAIS
ESPAÑOL
[ON]
POWER
or
When “CLOCK SET” menu appears,
go to step 2 in “Clock Setting” on this page.
CLOCK SET
3
MONTH DAY
1 0 - -
YEAR
- - - -
/
HOUR MINUTE
- - - -
AM/PM
- -
:
or
–
–
27
EN
Quick Use Guide
DVD mode
VCR mode
VCR Playback
6
Media
Button
(Alphabetical order)
Before:
1
4
7
2
5
8
0
3
6
Turn on the TV.
VCR
• To select chapter or title
directly.
• To select track or file directly.
9
+10
• To search forward/backward
through a disc.
• To begin slow forward/reverse
playback in the pause mode.
Insert a cassette
tape into this unit.
To start playback
1
3
2
4
• To forward/backward a tape.
• To begin slow forward
playback in the pause mode.
• To search forward/backward
through a disc.
A-B
• To repeat between your chosen • To repeat between your
point of A and B.
chosen point of A and B. (CD)
PLAY
ANGLE
• To select camera angles on a
disc.
To stop playback
To eject the
cassette tape
AUDIO
• To select audio languages on a • To select “STEREO”, “L-ch” or
disc.
“R-ch”. (CD)
OPEN/CLOSE
• To clear the markers. (CD)
• To clear the markers.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
STOP
• To remove status number in
program input.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat. (CD)
CLEAR/
C. RESET
• To exit the VCR menu.
• To reset the tape counter.
DVD/CD Playback
DISPLAY
DVD
7
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current time,
tape counter, and L1 or L2.
Before:
• To select DVD output mode.
• To activate DVD mode.
• To select the DVD output mode.
• To activate DVD mode.
Turn on the TV, amplifier and any other
components which are connected to
this unit. Make sure the TV and audio
receiver are set to the correct channel.
• To select an item on
the VCR menu.
• To advance to the
next VCR menu.
• To go back one step
during clock and
ENTER
• To move the cursor and deter- • To move the cursor and deter-
mine its position.
mine its position.
timer programming.
INPUT
SELECT
DVD
• To select input L1 or L2.
MENU
MODE
• To call up the disc menu on a
disc.
• To call up the file list. (MP3)
Insert a disc with
label facing up.
1
2
4
• To arrange the playing order or
play randomly.
• To set virtual surround on/off.
• To set black level on/off.
• To set virtual surround on/off.
OPEN/CLOSE
POWER
OPEN/CLOSE
PAUSE
• To eject the cassette tape from
the cassette compartment.
• To open or close the disc tray. • To open or close the disc tray.
• To pause tape playback or
recording.
• To advance playback one frame
at a time.
• To pause disc playback.
• To advance playback one frame • To pause disc playback.
at a time.
To start playback
To stop playback
3
• To begin disc playback.
• To turn the unit on/off.
• To begin disc playback.
• To turn the unit on/off.
• To begin tape playback.
PLAY
POWER
STOP
PLAY
• To turn the unit on/off.
REC/OTR
REPEAT
RETURN
• To start recording or one-touch
timer recording.
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or
disc repeatedly. (MP3)
Remote Control
• To play back a chapter or title
repeatedly.
• To select the repeat mode on/
off.
8
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
POWER
OPEN/CLOSE
SPEED
T-SET
SEARCH
MODE
1
4
7
2
5
8
3
6
9
• To search track or file.
• To search chapter, title or time.
• To set or search the markers.
• To call up the index or time
search menu.
TRACKING
• To search time. (CD)
• To set or search the markers. (CD)
SETUP
SKIP
CLEAR/
INPUT
SELECT
C. RESET
• To call up the DVD menu.
• To skip chapters or titles.
• To call up the DVD menu.
• To skip tracks or files.
• To call up the VCR menu.
0
VCR
+10
DVD
DISPLAY
MODE
PLAY
SPEED
STOP
SKIP
• To select the recording speed.
• To stop playback or recording.
REC/OTR
TOP MENU
MENU
PAUSE
AUDIO
SEARCH
MODE
STOP
• To stop playback.
• To stop playback.
ENTER
SUBTITLE
SETUP
ZOOM
RETURN
A-B
• To select subtitles on a disc.
SUBTITLE
ANGLE
REPEAT
• To return to the top file of the
highest hierarchy in the pro-
gram and file list. (MP3)
TOP MENU
• To call up the top menu on a
disc.
TRACKING
TRACKING
• To adjust the tracking manually
during playback.
T-SET
• To put the VCR into standby
mode for a timer recording.
VCR
• To select the VCR output mode.
• To activate VCR mode.
ZOOM
• To magnify part of a picture.
(2x/4x)
Printed in China
E8E70UD
1VMN23390 ★★★★★
|