Professional LCD Monitor
LUMA Family Catalog
2006
Professional LCD Monitors
One-piece Type Page 8
Separate Type Page 4
Multi-display Type Page 12
Handheld Type Page 10
Separate Type
The separate type LUMA monitors represent the pinnacle of the LUMA Series. Consisting of high-
grade LCD panels used together with a dedicated MEU-WX2 signal-processing unit – which
provides a rich set of interfaces – they offer SD and HD multi-format capability as well as PC input
capability. These monitors are furnished with the features and quality to replace CRT monitors at
the Sony PVM-L5 and PVM-L4 range.
Flexible Choice of LCD Display
Panels
Five LCD display sizes are available. Each LCD display uses
one MEU-WX2 signal-processing unit for parameter control
and signal interface.
Panel Types
Mounting
Panel
Aspect
Ratio
Desk-top
Stand
Panel Size
*
Mounting Holes
(MM)
19-inch Rack
LMD-322W
LMD-232W
LMD-322W
LMD-232W
LMD-212
Wide
Wide
4:3
31.6-inch
23-inch
SU-559
SU-558
SU-558
Not applicable
Not applicable
330 x 330 hooks
VESATM 75 x 75
VESA 75 x 75
21.2-inch
16.7-inch
15.1-inch
Optional MB-523
LMD-172W
LMD-152
Wide
4:3
SU-558 Optional MB-522A VESA 75 x 75
SU-558 Optional MB-524 VESA 75 x 75
* Viewable area measured diagonally.
Flat LCD Panel with Separate
Signal-processing Unit
The separate type LUMA monitors consist of extremely thin
and lightweight LCD displays, and a highly advanced signal-
processing unit (MEU-WX2 Multiformat Engine Unit). This
'separate unit' design offers two significant benefits – it
allows the LCD display to be made as thin and as lightweight
as possible, and enables flexible placement of display controls
and interface connectors. The LCD display and Multiformat
Engine Unit are connected via a single multi-pin cable*, up to
10 meters long (optional), which avoids having multiple
cables hanging from the LCD displays themselves. The
optional SU-558 monitor stand has a biaxial joint in its neck
assembly, allowing the LCD displays to be positioned at
various heights and tilt angles.
LMD-212
* The LMD-232W, LMD-212, LMD-172W, and LMD-152 are supplied with one
1.8-meter cable, and the LMD-322W with one 3.0-meter cable.
LMD-172W
LMD-152
4
Separate Type
Signal-interface Options
The MEU-WX2 can accept HD-SDI, SD-SDI, or DV signals via
the following optional input adaptors.
Input Versatility
Multi-format Signal Support
BKM-220D, SD-SDI 4:2:2 Input Adaptor*1
• SD-SDI signal input (x2) • SD-SDI monitor output (x1)
• Power consumption: 1.5 W
The MEU-WX2 Multiformat Engine Unit of the separate type
LUMA monitors can accept almost any SD or HD video format,
both analog and digital. These include composite NTSC and PAL,
component 480/60i and 575/50i, progressive 480/60P and
576/50P, and high-definition 1080/60i, 1080/50i, and 720/60P. It
can also accept 1080/24PsF and 1080/25PsF.
BKM-243HS, HD-SDI/SD-SDI Input Adaptor*1
• HD-SDI/SD-SDI signal input (x2) • HD-SDI/SD-SDI monitor output (x1)
• Power consumption: 2 W
•HD-SDI and SD-SDI signals are automatically detected.
Standard interfaces include analog composite (NTSC/PAL),
525i/625i component and RGB, and Y/C*1. Digital interfaces are
offered as optional boards to meet budgetary and user needs.
To keep the unit compact (1RU high), the analog inputs share the
same four BNC connectors, each with loop-through capability.
The MEU-WX2 also accepts various types of analog computer
signals. With its high-performance scan converter, it can display
PC signals from VGA to SXGA*2.
BKM-255DV*, DV Input Adaptor*1,*2
• DV signal port (x 2) • Power consumption: 4 W
*1 Embedded audio is supported.
*2 The full command set of the AV/C (Audio/Video and Control) protocol is
not supported.
Preset Computer Input Frequencies
The MEU-WX2 is factory preset to accept 19 typical computer
input signal frequencies.
*1 Y/C signals must be input via the BNC connectors of the MEU-WX2 using an
S-Video-to-BNC conversion connector.
*2 SXGA images are down-converted for display.
Preset Input Frequencies
Sync. polarity
Horizontal Vertical
Dot Clock
[MHz]
Input Signals/Input Adaptors
No.
Preset Signal
fH [kHz]
fV [Hz]
P01
P02
P03
P04
P05
P06
P07
P08
P09
VGA mode 3
31.469
37.500
43.269
29.531
37.879
46.875
53.674
36.979
48.363
60.023
68.677
47.693
47.396
63.981
63.194
31.469
47.297
60.091
48.935
59.940
75.000
85.008
59.780
60.317
75.000
85.061
59.837
60.004
75.029
84.997
59.992
59.995
60.020
59.957
70.087
59.870
74.926
59.969
25.175
31.500
36.000
23.625
40.000
49.500
56.250
35.500
65.000
78.750
94.500
80.125
68.250
108.000
91.000
28.322
56.000
102.875
68.900
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Negative
Positive
Positive
Negative
Positive
Positive
Positive
Negative
Positive
Negative
Negative
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Negative
Negative
Positive
Positive
Positive
Negative
Positive
Negative
Positive
Negative
Positive
Negative
Input Signal
Interface
VGA VESA 75 Hz
VGA VESA 85 Hz
VGA (non-CRT)
640 x 480
800 x 600
Composite/
Y/C
RGB/
Component
SD-SDI/
HD-SDI
Optional
SD-SDI
Optional
DV
System
Total
Line
Aspect
Ratio
Active
Line
SVGA VESA 60 Hz
SVGA VESA 75 Hz
SVGA VESA 85 Hz
SVGA (non-CRT)
XGA VESA 60 Hz
XGA VESA 75 Hz
XGA VESA 85 Hz
WXGA* (CRT 60 Hz)
WXGA* (non-CRT)
SXGA* VESA 60 Hz
SXGA*(non-CRT)
VGA TEXT
Optional
Standard
BKM-220D BKM-243HS BKM-255DV
575/50i
480/60i*
576/50P
625
525
625
525
575
483
576
483
16:9/4:3
16:9/4:3
16:9/4:3
16:9/4:3
16:9
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
—
—
O
O
O
O
O
O
O
O
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
P10 1024 x 768
P11
P12
P13
P14
480/60P
1080/24PsF
1080/50i
1035/60i*
1080/60i*
720/50P
1125 1080
1125 1080
1125 1035
1125 1080
1280 x 768
16:9
1280 x 1024
16:9
P15
P16 720 x 400
P17 1024 x 768
P18 1280 x 768
P19 1280 x 800
16:9
VGA (non-CRT)
WXGA* (CRT 75 Hz)
WXGA
750
750
720
720
16:9
720/60P
16:9
* Also accepts 59.94 Hz field rate.
* SXGA and WXGA images are down-converted for display.
BKM-220D Connector Panel
BKM-243HS Connector Panel
BKM-255DV Connector Panel
SD-SDI Input
(BNC x 2)
SD-SDI Monitor Output
(BNC x 1)
HD-SDI/SD-SDI
Input (BNC x 2)
HD-SDI/SD-SDI
Monitor Output (BNC x 1)
DV Input/Output (6-pin IEEE1394 x 2)
BKM-220D
DIGITAL
BKM-255DV
DV IN/OUT
1
2
1
2
BKM-243HS
DIGITAL/HD SDI
1
2
MONITOR OUT
INPUT
MONITOR OUT
INPUT
MEU-WX2
Front Panel
Rear Panel
5
Separate Type
Sophisticated I/P Conversion using X-Algorithm*
All LCD monitors require two processes to map an interlace
signal to the progressive LCD pixel array – I/P conversion and
line scaling. The former converts the interlace signal to a
progressive signal and the latter converts the input signal's
line count to match the LCD pixel array. HD/SD-compatible
monitors use LCD panels with resolutions higher than the SD
signal. This means that the I/P process must be handled with
great accuracy to keep its effect to a minimum after the line
scaling.
Superb Picture Performance
High Purity Color Filters
The separate type LUMA monitors use precisely manufactured
RGB color filters, allowing the reproduction of colors with
stunning depth and saturation – creating highly natural images.
Accurate Gamma and Stable White Balance
- ChromaTRU Color Processing
For an extra level of color reproduction accuracy, every LCD panel
used in the separate type LUMA Series is precisely color calibrated
at the factory, providing consistent characteristics extremely close
to CRT displays.
Conventional LCD monitors conduct the I/P conversion simply
by combining two adjacent picture fields into one picture
frame. This method is effective for static areas of the image,
but can often result in jagged shape noise along the oblique
direction of fast-moving objects.
The colorimetry of an LCD display, by nature, can exhibit
inaccurate R, G, B color coordinates and unbalanced R, G, B
gamma curves, which can make precise color matching between
multiple monitors a challenge. These are also the primary reasons
why LCD color tone can slightly differ from CRTs.
To avoid this, the separate type LUMA models incorporate
Sony's original X-Algorithm technology, which uses a picture-
adaptive Still Mode and Motion Mode for the I/P conversion.
By examining the pixels in preceding fields, the I/P conversion
will operate in either Still or Motion Mode. For pixels where
motion is not detected, the I/P conversion will simply copy
pixels from the preceding field to create the absent scanning
line.
The separate type LUMA monitors solve this problem by precisely
calibrating each LCD panel's light output so that the R, G, B color
coordinates are extremely close to those of a CRT monitor. A
second calibration is further applied so that white balance is
maintained at a consistent color temperature throughout all
grayscale levels.
In contrast, when motion is detected, picture frames are
created from the interlace signal on a field basis by
interpolating the missing pixels of every other line.
X-Algorithm intelligently examines a significant area
surrounding the missing pixel and uses the most logical pixels
above, below, or in the diagonal direction of the moving
picture part to insert a natural scanning line.
The result of these precise calibrations is color reproduction
reminiscent of Sony CRT displays.
CIE Color Coordinates
Orange yellow
0.55
0.50
0.45
0.40
0.35
0.30
0.25
Green
Yellow green
Foliage
Yellow
CRT
Orange
Dark skin
LCD
The direct result of X-Algorithm – much smoother image
reproduction for both still and moving areas of interlace SD
signals.
Red
Light skin
Whlite
Moderate red
Bluish green
Magenta
Blue flower
Cyan
Blue sky
* X-Algorithm is not used for HD signal input.
Purple
v'
Purplish blue
Blue
Excellent Brightness and Contrast
While conventional LCD monitors can tend to be dark, the
separate type LUMA monitors provide high-brightness and high-
contrast images by use of super-wide aperture LCD panels.
Extremely Wide Viewing Angle
0.20
0.15
The separate type LUMA monitors offer the most stable
images within the LUMA Series when viewed from various
angles. They offer a wide viewing angle of 170 degrees,
horizontally and vertically, with virtually no reduction in
picture contrast, color saturation, and hue shift. This allows
precise images to be clearly viewed from various positions and
angles – a critical requirement in professional video
monitoring.
0.10
0.15
0.20
0.25
0.30
u'
0.35
0.40
0.45
0.50
CRT (Sony CRT)
ChromaTRU
LCD (Sony LCD Panel)
Sony LCD panel
Sony CRT
The CIE u’ v’ chart is used to evaluate the light output of display
devices. In this diagram, the raw light output of a Sony LCD panel is
compared with that of a Sony CRT. The triangular areas show their
different color reproduction capabilities (Color Space). The green and
red dots indicate the color of light output from a Sony LCD panel and
that from a Sony CRT for certain RGB input signals. Note that the
same light color is not obtained for the same video input. The
ChromaTRU process, on the other hand, reproduces consistent light
output extremely close to that of a CRT.
6
Separate Type
AR (Anti-Reflection) Coated Protection Panel
Stereo Audio Monitoring
The MEU-WX2 is equipped with stereo speakers (0.5 W + 0.5
W), which enable the user to monitor audio.
The LCD panels of the separate type LUMA models use a
robust AR-coated protection layer, which minimizes the chance
of the panel being scratched during transportation. The AR
coating additionally has two unique characteristics: it provides
a high transmission rate of the internal light source to keep
the picture as bright as possible, and it keeps reflection from
ambient light to a minimum. As a result, when used in bright
lighting conditions, high contrast is still maintained even in
dark areas of the picture – a clear benefit over CRT monitors.
Protected Controls
The key-inhibit function helps prevent inadvertent operations
from the control panel.
Convenient Installation
By nature, the use of LCD technology in the LUMA Series
eliminates many concerns inherent in CRT monitors. These
include convergence alignments, geometric distortion, flicker, and
image burn-in. The LUMA Series is also completely resistant to
magnetic fields, making them easier to install than CRT monitors.
Operational Convenience
Advanced Marker Settings
The separate type LUMA Series can display various area
markers, including a center marker, aspect markers, and a
safety zone marker. The brightness of these markers can be
selected from three different levels, white, gray, and dark gray.
What's more, users can select either a black or gray matte to
fill the outer area of the aspect markers.
These flexible marker controls, together with the choice of
many different aspect markers, make the separate type LUMA
Series an extremely convenient display device for a variety of
shooting scenarios – from standard video acquisition to digital
cinematography.
Mounting Flexibility
Mountable in a 19-inch EIA Standard Rack
(LMD-212/LMD-172W/LMD152)
The LMD-172W (7U high) and LMD-152 (7U) can be mounted in a
19-inch EIA standard rack with the optional MB-522A and MB-524
Mounting Bracket, respectively. The MEU-WX2 (1U high) can be
mounted in a 19-inch EIA standard rack with the supplied
mounting bracket. Although wider than the 19-inch rack, the
LMD-212 (10U high) can also be rack-mounted using the optional
MB-523 Mounting Bracket.
Marker Variation
Mounting the LMD-322W
The large screen LMD-322W can also be mounted on the optional
SU-559 Floor Stand or on a wall using the mounting hooks (330 x
330 mm pitch) on the rear of the display.
16:9 Mode
4:3 Mode
4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, 1.85:1 & 4:3
Aspect Marker
16:9
Center Marker
Safety Area
O
80%, 85%, 88%, 90%, 93%
VESA Mounting
Complying with VESA standards, the LMD-232W, LMD-212,
LMD-172W, and LMD-152W can easily be mounted (75 x 75
mm pitch) on a wall or a ceiling. Although large in screen size,
these monitors are thin and lightweight because the signal-
processing circuitry is contained in the separate MEU-WX2.
In addition, the arm of the displays can be adjusted with
more flexibility because only one cable is required to connect
the display to the MEU-WX2.
Color Temperature/Gamma Selection
High/low color temperatures or user preset can be selected.
A variety of gamma modes can also be selected.
Selectable Scan Size for Video Input and Aspect Ratio
The screen size can be selected between 5% over-scan and
0% scan modes. The aspect ratio can be switched between
16:9 and 4:3 according to the input signal.
Three-color Tally
All separate type LUMA panels, excluding the LMD-322W,
come equipped with a tally lamp that can be lit up via a
parallel remote connector. The status of the signal displayed
on the monitor can be identified by the tally color – red,
green, or amber.
Other Features
• H/V Delay Function
• ACC Off
• DC Operation (LMD-172W, LMD-152 via the MEU-WX2)*
• Setup Level for Analog Component and NTSC signal
• Sub Control on Contrast, Chroma, Phase, and Brightness
• Blue-Only Mode
Smart APA (Auto Pixel Alignment) for Computer Input
The image size can be automatically adjusted to its optimal
setting with the one-touch APA key.
• Monochrome Mode
Parallel Remote Control
• Auto Chroma/Phase Setup
The MEU-WX2 can be controlled remotely via its parallel
remote connector. There are 31 functions in the remote
menu (such as the ability to switch input signals), of which
seven can be allocated to the connector.
• Power-saving Function (computer input only)
• DCC-2B Plug and Play (computer input only)
* SMF-600 Extension Cable cannot be used for DC operation.
7
One-piece Type
The one-piece type LUMA monitors offer the best quality-per-cost balance for SD signal monitoring.
They are designed exclusively for SD video input and offer the most natural picture reproduction of such
(525/60i and 625/50i) signals. With all signal processing and interfaces built into their slim panels, these
monitors offer a variety of analog interfaces ranging from analog composite and Y/C to component video.
In addition, SD-SDI input is offered on the higher-grade LMD-2020 and LMD-1420 models.
These LUMA monitors are optimized to replace CRT monitors at the Sony PVM-L2 and PVM-L1 range.
Two Panel Sizes and Two Series
The one-piece type LUMA monitors are offered in two grades – the LMD-2010
and LMD-1410, which provide the basic features for professional picture
monitoring, and the LMD-2020 and LMD-1420 for more advanced monitoring.
Model Types
Panel
Aspect
Ratio
Mounting Holes (mm)
Desktop
Stand
Panel Size
*
VESA Mounting
19-inch Rack
Optional MB-527
Optional MB-526
Optional MB-527
Optional MB-526
LMD-2020
LMD-1420
LMD-2010
LMD-1410
4:3
4:3
4:3
4:3
20.1-inch
14-inch
Supplied
Supplied
Supplied
Supplied
100 x 100 mm
100 x 100 mm
100 x 100 mm
100 x 100 mm
20.1-inch
14-inch
LMD-2020
LMD-1420
* Viewable area measured diagonally.
Input Versatility
As standard, all one-piece type LUMA monitors come equipped with a full
range of analog SD inputs including analog composite NTSC and PAL, Y/C
(S-Video), and 525i/625i component and RGB.
The LMD-2020 and LMD-1420 add the further capability of SD-SDI input
through the use of the optional BKM-320D SD-SDI input adaptor.
Signal Interfaces
Input Signal
Interface
SD-SDI
The Optional
BKM-320D
Total
Line
Component/
Active Line
System
Composite
S-Video
RGB
LMD-2020
LMD-1420
LMD-2010
LMD-1410
480/60i*
575/50i
480/60i*
575/50i
525
625
525
625
483
575
483
575
O
O
O
O
O
O
O
—
* Also accepts 59.94 Hz field rate.
Connector Panel for LMD-2020/LMD-1420
AC In
LINE A [composite (BNC), Y/C
(4 pin mini-DIN), Audio (RCA pin)]
LINE A
PARALLEL REMOTE
RGB/COMPONENT
OPTION
AUDIO IN
IN
OUT
G/Y
OPTION IN
LINE B [composite (BNC), Audio (RCA pin)]
PARALLEL REMOTE (modular connector)
RGB/COMPONENT (BNC), Audio (RCA pin)
ENT SYNC In/Out (external sync) (BNC)
OPTION AUDIO In (RCA pin)
LINE
VIDEO
B
IN
IN
OUT
OUT
IN
IN
OUT
OUT
IN
OUT
IN
IN
EXT OUT
SYNC
VIDEO
AUDIO
B/PB
LMD-2010
LMD-1410
AC IN
IN
OUT
OUT
AUDIO
AUDIO
R/PR
OPTION In connector for SD-SDI board (BKM-320D)
Connector Panel for LMD-2010/LMD-1410
AC In
LINE A
PARALLEL REMOTE
RGB/COMPONENT
IN
OUT
G/Y
LINE A [composite (BNC), Y/C
(4 pin mini-DIN), Audio (RCA pin)]
LINE
B
IN
IN
OUT
OUT
IN
IN
OUT
OUT
IN
OUT
VIDEO
AUDIO
VIDEO
B/PB
AC IN
LINE B [composite (BNC), Audio (RCA pin)]
PARALLEL REMOTE (modular connector)
RGB/COMPONENT (BNC), Audio (RCA pin)
IN
OUT
IN
OUT
AUDIO
AUDIO
R/PR
8
One-piece Type
Advanced Marker Settings (LMD-2020/LMD-1420 only)
The LMD-2020 and LMD-1420 can display various area
markers, including a center marker, aspect markers, and a
safety zone marker. The brightness of these markers can be
selected from three different levels, white, gray, and dark gray.
What's more, users can select either a black or gray matte to
fill the outer area of the aspect markers. These flexible marker
controls, together with the choice of many different aspect
markers, make these monitors an extremely convenient display
device for a variety of shooting scenarios.
High Picture Quality
Precise reproduction of interlace SD images
The one-piece type LUMA monitors incorporate VGA-type LCD
panels with 640 x 480 pixel resolution for precise reproduction
of interlace SD video images.
To display an interlace signal on a progressive LCD monitor, it
must first be converted to a progressive signal (I/P conversion).
In this process, the absent lines of the interlace field are
interpolated using data from the previous field, or data from
adjacent lines within the same field. A second process, called
'line scaling' is then executed to match the input signal's line
count to the vertical resolution of the LCD display. However,
since scaling involves duplication or removal of scanning lines,
it can have a large effect on picture quality in image areas
where I/P conversion is difficult to achieve. This effect can only
be suppressed to a negligible level using highly sophisticated
but costly I/P conversion technology.
To minimize this effect while maintaining best quality-per-cost
value, the LMD-2020, LMD-1420, LMD-2010, and LMD-1410
use specially selected VGA (640 x 480 pixels) LCDs that allow
moderate scaling to be used for the reproduction of 525 and
625 interlace signals. The result is extremely precise image
reproduction of interlace SD signals, for any type of picture
content – and without the use of expensive I/P conversion
technology.
16:9 Mode
4:3 Mode
Aspect Marker
Center Marker
Safety Area
4:3, 15:9, 14:9, 13:9
16:9
O
80%, 85%, 88%, 90%, 93%
Color Temperature/Gamma Selection
High/low color temperatures or user preset can be selected.
A variety of gamma modes can also be selected.
Three-color Tally (LMD-2020/LMD-1420 only)
The LMD-2020 and LMD-1420 come equipped with a tally
lamp that can be lit up via a parallel remote connector. The
status of the signal displayed on the monitor can be identified
by the tally color – red, green, or amber.
Parallel Remote Control
The one-piece type LUMA monitors can be controlled remotely
via a parallel remote connector. There are 25 functions in the
remote menu (such as the ability to switch input signals), of
which seven can be allocated to the connector.
Excellent Brightness and Contrast
Monaural Audio Monitoring
All one-piece type LUMA monitors are equipped with a speaker
(0.5 W), which enables the user to monitor audio.
The one-piece type LUMA monitors provide high-brightness
and high-contrast images by use of wide aperture LCD panels.
In addition, the use of precisely manufactured RGB color filters
allows these monitors to reproduce colors with stunning depth
and saturation – creating highly natural images.
Protected Controls
The key-inhibit function helps prevent inadvertent operations
from the control panel.
Wide Viewing Angle
The LCD panels used in the one-piece type LUMA monitors
have a wide viewing angle of 170 degrees, both horizontally
and vertically, with minimal reduction in picture contrast. This
allows images to be viewed from various positions and angles.
Convenient Installation
The one-piece type LUMA models, when compared to their PVM
monitor equivalents, are 40% slimmer, 30-50 % lighter, and
consume much less power. And, like all other LUMA monitors,
they eliminate the many concerns inherent in CRT monitors,
including convergence misalignments, geometric distortion,
flicker, image burn-in, and the effect of magnetic fields.
AR (anti-reflection) Coated Protection Panel
(LMD-2020/LMD-1420 only)
The LCD panels of the one-piece type LUMA models use a
robust AR-coated protection layer, which minimizes the
chance of the panel being scratched during transportation.
The AR coating additionally has two unique characteristics: it
provides a high transmission rate of the internal light source
to keep the picture as bright as possible, and it keeps
reflection from ambient light to a minimum. As a result,
when used in bright lighting conditions, high contrast is still
maintained even in dark areas of the picture – a clear benefit
over CRT monitors.
Mounting Flexibility
Mountable in a 19-Inch EIA Standard Rack
All one-piece type LUMA monitors can be mounted in a 19-inch EIA
standard rack using optional mounting brackets. The 9U-high
LMD-2020 and LMD-2010 use the MB-527 Mounting Brackets and
the 7U-high LMD-1420 and LMD-1410 use the MB-526 Mounting
Brackets.
VESA Mounting
Complying with VESA standards, the one-piece type LUMA monitors
can easily be mounted (100 x 100 mm pitch) on a wall or a ceiling.
Operational Convenience
4:3/16:9 Switchable Display
Other Features
• Setup Level for Analog Component and NTSC signal
• Blue-Only Mode (LMD-2020/LMD-1420 only)
• 4:3 Zoom
The scan aspect ratio can be switched between 4:3 and 16:9.
Selectable Scan Size
The scan size can be selected between 5% over-scan and -3%
underscan modes.
• External Sync In (LMD-2020/LMD-1420 only)
9
Handheld Type
The handheld type LUMA monitors bring a new level of monitoring convenience into the field and the
studio. Three models are available – the LMD-9050 offering digital HD/SD multi-format capabilities, the
LMD-9030 focused on SD-SDI video monitoring, and the LMD-9020 exclusively for analog video monitoring.
Using a common chassis, all models can be AC, DC, or battery driven so that they can be hand-held, situated
on a desk, or mounted in standard racks. Together with their high-grade LCD panels, this series of monitors
offers a range of rear panel interfaces from analog SD input to digital HD-SDI.
Panel Type
Panel Aspect Ratio
Panel Size*
8.4-inch
Acceptable Format
Analog, HD-SDI/SD-SDI
Analog, SD-SDI
LMD-9050
LMD-9030
LMD-9020
4:3
4:3
4:3
8.4-inch
8.4-inch
Analog
* Viewable area measured diagonally.
Input Versatility
To keep their units simple and clean, the handheld type LUMA monitors
provide all inputs built-in as standard, instead of using optional input
modules. For typical SD video monitoring, all three monitors offer interfaces
for analog composite (NTSC/PAL), analog component/RGB (525/60i and
625/50i) and analog Y/C (S-Video). The LMD-9030 additionally offers SD-
SDI input capability. The top-of-the-line LMD-9050 further provides a
variety of digital progressive SD and HD formats through its HD-SDI
interface*. These include 480/60P and 576/50P, and high-definition
1080/60i, 1080/50i, 720/50P, 720/60P as well as 1080/24PsF.
LMD-9050
LMD-9030
LMD-9020
* The SD-SDI and HD-SDI inputs share the same BNC connectors, which offer automatic signal-type
detection.
Input Signals
Input Signal
Total Lines Active Line Aspect Ratio
Standard Interface
RGB
Y/C (x 1) Component (x 1)
Composite
SDI (x2)
SD-SDI HD-SDI
System
LMD-9050 LMD-9050 LMD-9050 LMD-9050
LMD-9030 LMD-9030 LMD-9030
LMD-9020 LMD-9020
Model
575/50i
480/60i*
480/60P
625
525
575
483
16:9/4:3
16:9/4:3
16:9/4:3
16:9/4:3
16:9
O
O
O
O
O
O
O
O
O
O
O
O
—
—
—
—
O
O
O
525
483
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
576/50P
625
576
1080/24PsF
1080/50i
1035/60i*
1080/60i*
720/50P
1125
1125
1125
1125
750
1080
1080
1035
1080
1080
720
16:9
O
16:9
O
16:9
O
16:9
O
720/60P
750
16:9
O
* Also accepts 59.94 Hz field rate.
High Picture Quality
Excellent Brightness and Contrast
The handheld type LUMA monitors provide high-brightness and high-
contrast images by using wide aperture LCD panels. In addition, the use of
precisely manufactured RGB color filters allows these monitors to reproduce
colors with stunning depth and saturation – creating highly natural images.
10
Handheld Type
Wide Viewing Angle
Advanced Marker Settings
The LCD panels used in the handheld type LUMA monitors
have a wide viewing angle of 170 degrees, both horizontally
and vertically, with minimal reduction in picture contrast.
The handheld type LUMA monitors can display various area
markers, including a center marker and aspect markers.
The brightness of these markers can be selected from three
different levels, white, gray, and dark gray, and their widths
can be selected from FINE, STANDARD, and BOLD. Users can
also select either a black or gray matte to fill the outer area of
the aspect markers. These flexible marker controls, together
with the choice of many different aspect markers, make the
handheld type LUMA monitors extremely convenient for a
variety of shooting scenarios.
AR (anti-reflection) Coated Protection Panel
The handheld type LUMA monitors use robust AR-coated
protection layers, which minimize the chance of their panels
being scratched during transportation – an extremely important
criteria for use in the field or in any mobile application. The AR
coating additionally has two unique characteristics: it provides a
high transmission rate of the internal light source to keep the
picture as bright as possible, and it keeps reflection from
ambient light to a minimum. As a result, when used in bright
lighting conditions, high contrast is still maintained even in dark
areas of the picture.
16:9 Mode
4:3 Mode
Aspect Marker
Center Marker
4:3, 15:9, 14:9, 13:9,
16:9
1.85:1, 2.35:1, 1.85:1& 4:3
O
Color Temperature/Gamma Selection
High/low color temperatures or user preset can be selected.
A variety of gamma modes can also be selected.
Operational Convenience
Three-color Tally
ENG Kit VF-509
All handheld type LUMA monitors come equipped with a tally
lamp that can be lit up via a parallel remote connector.
The status of the signal displayed on the monitor can be
identified by the tally color – red, green, or amber.
The handheld type LUMA monitors are a strategic choice for
use in ENG and EFP field operations. When compared to CRT
displays, the picture contrast of these monitors is affected less
by ambient light, allowing clear images to be viewed even
under strong sunlight. For further protection, the optional
VF-509 ENG kit provides a Viewing Hood, Carrying Handle,
and Connector Protector.
Parallel Remote Control
The handheld type LUMA monitors can be controlled remotely
via their parallel remote connectors. There are 27 functions in
the remote menu (such as the ability to switch input signals),
of which seven can be allocated to the connector.
4:3/16:9 Switchable Display
Monaural Audio Monitoring
The scan aspect ratio can be switched between 4:3 and 16:9.
All handheld type LUMA monitors are equipped with a speaker
(0.5 W), which enables the user to monitor audio.
Selectable Scan Size
The scan size can be selected between 5% over-scan, 0%,
and -3% underscan modes.
Protected Controls
The key-inhibit function helps prevent inadvertent operations
from the control panel.
Connector Panel for LMD-9050, LMD-9030 and LMD-9020
Convenient Installation
As with all other LUMA monitors, handheld type LUMA
monitors eliminate the many concerns inherent in CRT
monitors, including convergence misalignments, geometric
distortion, flicker, image burn-in, and the effect of magnetic
fields.
Mounting Flexibility
The handheld type LUMA monitors are 5U high and half-rack
wide. Using the optional MB-525 Mounting Bracket with a nine-
step tilt capability, two units can be installed side-by-side in a 19-
inch EIA standard rack.
Other Features
• Setup Level for Analog Component and NTSC signal
• Sub Control on Contrast, Chroma, Phase, and Brightness
• Blue-only mode
• Power-saving Function
• Monochrome mode
• 4:3 Zoom
11
Multi-display Type
The multi-display type LUMA monitors integrate high-quality LCD panels into an extremely thin and
lightweight, 19-inch rack-mountable chassis. They can be AC or DC powered. These monitors are
particularly handy for viewing multiple SD signal sources in space-confined environments such as in OB
vehicles, machine rooms, and desktops – or any general application where multiple pictures must be
viewed.
Panel Types
Panel Aspect Ratio Number of Displays
Display Size*1
LMD-4420
LMD-5320
4:3
4
3
2
4-inch
5.6-inch
7-inch
4:3
LMD-7220W
16:9*2
*1 Viewable area measured diagonally.
*2 HD signals must be externally down-converted for display.
LMD-7220W
LMD-5320
Input Capability
All multi-display type LUMA monitors accept either composite
or SDI signals. Each LCD panel is equipped with a composite
connector as standard, while SDI input can be added simply
by installing the optional BKM-320D*.
* One BKM-320D is required per screen.
High Picture Quality
Although small in size, the multi-display type LUMA monitors
incorporate high-grade LCD panels with high brightness and
high contrast. These LCD panels also offer a wide viewing
angle, both vertically and horizontally.
LMD-4420
Operational Convenience
LMD-7220W Connector Panel
Selectable Aspect Ratio (LMD-7220W only)
The scan aspect ratio of the displays on the LMD-7220W can
be switched between 16:9 and 4:3 by pressing a button on
the front panel.
Three-color Tally
The LMD-7220W, LMD-5320, and LMD-4420 come equipped
with a tally lamp that can be lit up via a parallel remote
connector. The status of the signal displayed on the monitor
can be identified by the tally color – red, green, or amber.
LMD-5320 Connector Panel
Parallel Remote Control
The multi-display type LUMA monitors can be controlled
remotely via their parallel remote connector. There are 5
functions (LMD-7220W)/4 functions (LMD-5320/LMD-4420) in
the remote menu (such as the ability to switch input signals),
which can be allocated to the connector.
LMD-4420 Connector Panel
12
Multi-display Type
Low Power Consumption
Convenient Installation
Compared to conventional CRT multiple monitors, multi-
display type LUMA monitors offer drastic reductions in power
consumption and room-cooling requirements. This is a huge
bonus in applications where power consumption is critical,
such as OB van installations.
All multi-display type LUMA monitors are mountable on a
19-inch EIA standard rack. For viewing convenience, the
LMD-7220W and LMD-5320 offer a 5-step tilt mechanism,
and the LMD-4420 offers a 3-step tilt mechanism.
And like all other LUMA monitors, they eliminate the many
concerns inherent to CRT monitors, including convergence
misalignments, geometric distortion, flicker, image burn-in,
and the effect of magnetic fields.
Slim and Light
Thanks to their thin and lightweight designs, the multi-display type
LUMA monitors are ideal for installations where space is limited.
Optional Accessories
• BKM-220D
• BKM-243HS
• BKM-255DV
DV Input Adaptor
(for MEU-WX2)
• BKM-320D
SD-SDI Input Adaptor
(for LMD-2020, LMD-1420,
LMD-7220W, LMD-5320, and
LMD-4420)
SD-SDI 4:2:2 Input Adaptor
(for MEU-WX2)
HD-SDI/SD-SDI Input Adaptor
(for MEU-WX2)
• SMF-600
• SU-558
• SU-559
• MB-522A
Display IF Cable (10 m)
(for MEU-WX2)
Monitor Stand
Monitor Stand
(for LMD-322W)
Mounting Bracket
(for LMD-172W)
(for LMD-232W, LMD-212,
LMD-172W and LMD-152)
• MB-523
• MB-524
• MB-526
• MB-527
Mounting Bracket
(for LMD-212)
Mounting Bracket
(for LMD-152)
Mounting Bracket
(for LMD-1420, LMD-1410)
Mounting Bracket
(for LMD-2020, LMD-2010)
• MB-525
• MB-528
• VF-509
• BP-GL95/BP-GL65
Rechargeable Lithium-ion
Battery Pack
ENG Kit (Viewing Hood,
Carrying Handle and Connector
Protector) (for LMD-9050,
LMD-9030 and LMD-9020)
Mounting Bracket
(for LMD-9050, LMD-9030
and LMD-9020)
Mounting Panel
(for LMD-9050, LMD-9030
and LMD-9020)
• BP-L60S
• BC-L70
Lithium-ion Battery Pack
Lithium-ion Battery Charger
13
Specifications
Multiformat
Engine Unit
MEU-WX2
Input/Output
Input
Connector/Slot
B/PB/S-Y
G/Y/Composite
R/PR/S-C
BNC, Loop through, automatic 75 Ω termination (x1)
Composite
Y/C
1.0 Vp-p 3 dB,
sync negative
1.0 Vp-p 3 dB,
sync negative
0.286 Vp-p 3 dB (NTSC)
0.3 Vp-p 3 dB (PAL)
Component
RGB
0.7 Vp-p 3 dB
0.7 Vp-p 3 dB
Sync on G 0.3Vp-p
0.7 Vp-p 3 dB
0.7 Vp-p 3 dB
Audio in (for Video signals)
Stereo mini jack (x1)
-5 dBu, more than 47 kΩ
OPTION A-1
OPTION A-2
OPTION B-1
OPTION B-2
Ext. sync
Option Slot (x1)
Option Slot (x1)
BNC, Loop-through, automatic 75 Ω termination
0.3 ~ 4 Vp-p 3 dB, sync negative, usable tri-level sync signal 0.6 Vp-p 3 dB
Computer
HD D-sub 15-pin (female) (x1),
0.7 Vp-p, 75 Ω, positive (R,G,B)
Audio in (for computer signals)
Stereo mini jack (x1)
-5 dBu, more than 47 kΩ
DC IN*
XLR 4-pin (male) (x1), 12 V, output impedance 0.05 Ω or less
Output
Audio monitor out
Speaker Out
PARALLEL Remote
Display Signal Out
Display DC Out**
Stereo mini jack (x1)
Stereo (0.5 W + 0.5 W)
Modular 8-pin (Assignable)
Exclusive connector (x1)
XLR 4-pin (female) (x1), DC 16.5 V (when AC power is supplied)
DC 12 V (when DC power is supplied)
Video
Horizontal Scanning Frequency
Frame Scanning Frequency
Computer
15 to 45 kHz
48 to 60 Hz
Dot clock
110 MHz
28 to 69 kHz
60 to 85 Hz
DDC-2B
Horizontal Scanning Frequency
Vertical Scanning Frequency (frame)
Plug & Play
General
Power consumption
Maximum: Approx. 92 W (with 2 x BKM-243HS and LMD-230W)
Standard: Approx. 26 W (without optional input adaptor)
Power requirement
Operating Temperature
AC 100 to 240 V 10%, 50/60 Hz, DC 12 V (LMD-170W only)
0 to 35 °C (32 to 95 °F)
Operating Humidity
30 to 85% (no codensation)
-10 to 40 °C (14 to 104 °F)
0 to 90%
700 to 1060 hPa
434 x 44 x 305 mm
Storage and Trans. Temperature
Storage & Transport Humidity
Operating/Storage/Trans. Pressure
Dimensions (W x H x D)
(excluding protrusions)
(17 1/8 x 1 3/4 x 12 1/8 inches)
Approx. 4.5 Kg (9 lb 15 oz)***
Mass
Supplied Accessories
AC cord, AC plug holder, Mounting bracket, Operating instructions, CD-ROM, Warranty card
Dimensions
MEU-WX2
1
434 (17 / )
8
3
44 (1 / )
4
9
6.5 ( /
)
32
Unit: mm (inches)
14
Separate Type
(Studio Type)
LMD-322W
LMD-232W
LMD-212
LMD-172W
LMD-152
with the optional SU-558
monitor stand
with the optional SU-558
monitor stand
with the optional SU-558
monitor stand
with the optional SU-558
monitor stand
Picture Performance
Type
a-Si TFT Active Matrix LCD with a multi-layer AR-coated protection panel
Resolution
Pixel efficiency
Dot pitch
1280 x 768 dots
1024 x 768 dots
99.99%
0.420 x 0.420 mm
1280 x 768 dots
1024 x 768 dots
0.537 x 0.537 mm
0.3915 x 0.3915 mm
0.284 x 0.284 mm
0.297 x 0.297 mm
Approx. 687 x 412 mm
(27 1/8 x 16 1/5 inches)
802 mm (31 5/8 inches)
Approx. 501 x 301 mm
(19 3/4 x 11 7/8 inches)
584 mm (23 inches)
Approx. 430 x 323 mm
(17 x 12 3/4 inches)
538 mm (21 1/4 inches)
Approx. 364 x 218 mm
(14 3/8 x 8 5/8 inches)
424 mm (16 3/4 inches)
Approx. 304 x 228 mm
(12 x 9 inches)
380 mm (15 inches)
Picture Size (H x W)
(Diagonal)
Aspect
15:9
4:3
15:9
4:3
Colors
16,770,000 colors
Viewing Angle
Input
85°/85°/85°/85° (typical) (up/down/left/right contrast>10:1)
Display Input connector
Digital input
Dot clock
DVI-D
25.175 MHz
31.469 kHz
59.940 Hz
68.250 MHz
47.396 kHz
59.995 Hz
25.175 MHz
31.469 kHz
59.940 Hz
68.250 MHz
47.396 kHz
59.995 Hz
25.175 MHz
31.469 kHz
59.940 Hz
65.000 MHz
48.363 kHz
60.004 Hz
25.175 MHz
31.469 kHz
59.941 Hz
68.250 MHz
47.396 kHz
59.995 Hz
25.175 MHz
31.469 kHz
59.941 Hz
65.000 MHz
48.363 kHz
60.004 Hz
Horizontal
Vertical
Scanning Frequency
General
Power Consumption
Power requirement
Approx. 120 W
AC 100 to 240 V 10%, 50/60 Hz
Approx. 65 W
DC 16.5 V
Approx. 84 W
Approx. 53 W
DC 16.5 V/12V
Approx. 29 W
DC 16.5 V/12 V
DC 16.5 V
0 to 35 °C (32 to 95 °F)
30 to 80% (no condensation)
-10 to 40 °C (14 to 104 °F)
0 to 80%
Operating Temperature
Operating Humidity
Storage & Transport Temperature
Storage & Transport Humidity
Operating/Storage/Trans. Pressure
700 to 1060 hPa
790 x 512 x 94 mm *
563 x 372 x 78 mm *
515 x 409 x 81 mm *
441 x 294 x 76 mm *
379 x 297x 70 mm *
Dimensions (W x H x D)
1
1
3
1
3
1
3
1
1
3
5
5
7
(31 /8 x 20 /4 x 3 /4 inches) *
(22 /4 x 14 /4 x 3 /8 inches) *
(20 /8 x 16 /8 x 3 /4 inches) *
(17 /8 x 11 /8 x 3 inches) *
(15 x 11 /8 x 2 /8 inches) *
Approx. 17.6 Kg
Approx. 6.4 Kg
Approx.6.7 Kg
Approx. 4.8 Kg
Approx. 4.0 Kg
(Approx. 38 lb 13 oz)**
Approx. 49.6 Kg
(Approx. 108 lb 22 oz)***
(Approx. 14 lb 2 oz)**
Approx. 11.6 Kg
(Approx. 25 lb 9 oz)***
(Approx. 15 lb 7 oz)**
Approx. 11.9 Kg
(Approx. 26 lb 4 oz)***
(Approx. 10 lb 9 oz)**
Approx. 10.0 Kg
(Approx. 21 lb 1 oz)***
(Approx. 8 lb 13oz)**
Approx. 9.2 Kg
(Approx. 20 lb 4oz)***
Mass
AC cord, AC plug holder,
Display interface cable, Warranty card,
Operating instructions
Supplied Accessories
Display interface cable, Warranty card, Operating instructions
* without the optional monitor stand and not including the projection parts ** without the optional SU-558 monitor stand, SU-559 for LMD-322W *** with the optional SU-558 monitor stand, SU-559 for LMD-322W
Dimensions
LMD-322W
LMD-232W
LMD-212
LMD-172W
LMD-152
563 (22 1/4)
3
/ )
8
790 (31 1
/ )
8
515 (20
3
/
441.4 (17
)
8
378.9 (15)
Unit: mm (inches)
15
Specifications
One-piece
Type
LMD-2020
LMD-1420
LMD-2010
LMD-1410
Picture Performance
Type
A-Si TFT Active Matrix LCD with a multi-layer AR-coated protection panel
A-Si TFT Active Matrix LCD
ResolutionResolution
Pixel efficiency
Dot pitch
640 x 480 dots
99.99%
0.213 x 0.638 mm
0.443 x 0.443 mm
0.213 x 0.638 mm
0.443 x 0.443 mm
Picture Size (H x W)
(Viewable area)
(Diagonal)
Approx. 408 x 306mm
(Approx. 16 1/8 x 12 1/8 inches)
510 mm (20.1-inch)
Approx. 283 x 212 mm
(Approx. 11 1/4 x 8 3/8 inches)
354 mm (14-inch)
Approx. 408 x 306mm
(Approx. 16 1/8 x 12 1/8 inches)
510 mm (20.1-inch)
Approx. 283 x 212 mm
(Approx. 11 1/4 x 8 3/8 inches)
354 mm (14-inch)
Aspect
4:3
Colors
Approx. 16,700,000 colors
Approx. 16,200,000 colors
Approx. 16,700,000 colors
Approx. 16,200,000 colors
Viewing Angle
85°/85°/85°/85° (typical) (up/down/left/right contrast>10:1)
Input
Line A
Composite
Y/C
BNC x 1, 1.0 Vp-p 3dB 75 Ω termination, sync 0.3 Vp-p negative
DIN 4 pin x 1
Y: 1. 0Vp-p 3 dB, 75 Ω termination
C: 0.286 Vp-p 3 dB (NTSC), 0.3 Vp-p 3 dB (PAL),
75 Ω termination, sync 0.3 Vp-p negative
Audio in
Composite
Audio in
RCA pin x 1, -5 dBu 47 Ω or higher
BNC x 1, 1.0 Vp-p 3dB 75 Ω termination, sync 0.3 Vp-p negative
Line B
RCA pin x 1, -5 dBu 47 Ω or higher
RGB/Component
RGB/Component
BNC x 3, 0.7 Vp-p 3 dB 75 Ω termination, Sync on Green 0. 3Vp-p, negative
Audio in
D1-SDI
Audio in
RCA pin x 1, -5 dBu 47 Ω or higher
Option
D-sub 9-pin
RCA pin x 1 -5 dBu 47 Ω or higher
x
1
–
–
–
Exernal Sync
BNC x 1
Remote Parallel remote
Moduler 8-pin (Assignable)
Output
Line A
Composite
Y/C
BNC x 1, Loop-through, with 75 Ω automatic termination
DIN 4 pin x 1,
Loop-through, with 75 Ω automatic termination
Audio out
Composite
Audio out
RCA pin x 1
Line B
BNC x 1, Loop-through, with 75 Ω automatic termination
RCA pin x 1, Loop-through
RGB/Component
RGB/Component
Audio out
Exernal Sync
General
BNC x 3, Loop-through, with 75 Ω automatic termination
RCA pin x 1, Loop-through
BNC x 1 Loop-through with 75 Ω automatic termination
–
Power Consumption
Approx. 87 W
Approx. 51 W
Approx. 84 W
Approx. 48 W
Power requirement
Operating Temperature
Operating Humidity
Storage & Transport Temperature
Storage & Transport Humidity
Operating/Storage/Trans. Pressure
Dimensions (W x H x D)
Dimension
AC 100 to 240 V, 50/60 Hz
0 to 35 °C
30 to 85% (No condensation)
-10 to 40 °C
0 to 90 %
700 to 1060 hPa
Approx. 470 x 441 x 264 mm
Approx. 343 x 354 x 264 mm
(13 /8 x 14 x 10 /2 inch)
Approx. 470 x 441 x 264 mm
Approx. 343 x 354 x 264 mm
5
3
1
5
1
5
3
1
5
1
(18 /8 x 17 /8 x 10 /2 inch)
(18 /8 x 17 /8 x 10 /2 inch)
(13 /8 x 14 x 10 /2 inch)
Approx. 470 x 394 x 87mm
Approx. 343 x 304 x 87mm
Approx. 470 x 394 x 87mm
Approx. 343 x 304 x 87mm
Dimension without stand
5
5
1
5
1
5
5
1
5
1
(18 /8 x 15 /8 x 3 /2 inch)
Approx. 9.2 kg (20 lb 5 oz)
Approx. 7.5 kg (16 lb 9 oz)
(13 /8 x 12 x 3 /2 inch)
Approx. 6.8 kg (14 lb 16 oz)
Approx. 5.1 kg (11 lb 4 oz)
(18 /8 x 15 /8 x 3 /2 inch)
Approx. 8.7 Kg (19 lb 3 oz)
Approx. 7.0 kg (15 lb 7 oz)
(13 /8 x 123 /2 inch)
Approx. 6.5 Kg (14 lb 5 oz)
Approx. 4.8 kg (10 lb 9 oz)
Mass
Panel & Stand
Panel only
Supplied Accessories
AC power code, AC plug holder, Operating Instructions, CD-ROM, Using the CD-ROM Manual, Warranty card
Dimensions
470 (18 5/8)
87 (3 1/2)
80.6 (3 1/8)
LMD-2020
LMD-2010
LMD-1420
LMD-1410
343 (13 5/8)
76.2 (3) 86.8 (3 1/2)
MENU
ENTER
VOLUME
POWER
RGB/
EXT
SYNC
BLUE
ONL
LINE
A
LINE
B
C
O
M
P
O
N
E
N
T
S
D
I
Y
SCAN
ASPECT
KEY
INHIBIT
MENU
ENTER
VOLUME
POWER
RGB/
EXT
SYNC
BLUE
ONL
RESET
LINE
A
LINE
B
C
O
M
P
O
N
E
N
T
S
D
I
Y
SCAN
ASPECT
KEY
INHIBIT
RESET
96.8 (3 7/8)
264.4 (10 1/2)
96.8 (3 7/8)
264.4 (10 1/2)
Unit: mm (inches)
16
Handheld Type
LMD-9050
LMD-9030
LMD-9020
Picture Performance
Type
a-Si TFT Active Matrix LCD with a multi-layer AR-coated protection panel
Resolution
1024 x 768 dots
640 x 680 dots
Pixel efficiency
Picture Size (H x W), (Viewable area)
(Diagonal)
99.99%
Approx. 170.5 x 127.9 mm, (Approx. 6 3/4 x 5 1/8 inches)
213 mm (8.4-inch)
Approx. 170.9 x 128.2 mm, (Approx. 6 3/4 x 5 1/8 inches)
213.6 mm (8.4-inch)
Aspect
Colors
4:3
16,770,000 colors
Viewing Angle
Input
85°/85°/85°/85° (typical) (up/down/left/right contrast>10:1)
Line A
Composite
Y/C
BNC x 1, 1.0 Vp-p +3dB, -6 dB sync negative
4-pin mini-DIN x 1
Y : 1.0 Vp-p + 3dB, -6 dB sync negative
C : 0.286 Vp-p 3 dB (NTSC), 0.3 Vp-p 3 dB (PAL)
Audio
Composite
Audio
Mini jack x 1, -5 dBu 47 kΩ or higher
BNC x 1, 1.0 Vp-p +3 dB, -6 dB sync negative
Mini jack x 1, -5 dBu 47 kΩ or higher
Line B
RGB/Component RGB/Component
BNC x 3, RGB input : 0.7 Vp-p +3 dB, -6 dB (Sync On Green, 0.3 Vp-p sync negative)
Component input : 0.7 Vp-p +3 dB, -6 dB (75% chrominance standard color bar signal)
Audio
Mini jack x 1, -5 dBu 47 kΩ or higher
BNC x 1, 0.3 to 4 Vp-p bipolarity ternary or negative polarity binary
D1-SDI:
Ext.sync
SDI
HD-SDI/D1-SDI:
BNC x 2 (HD and D1 are automatically detected)
Sampling frequency D1-SDI:Y/R-Y/B-Y 13.5 MHz,
HD-SDI:Y/PB/PR 74.25 MHz
BNC x 2,
Sampling frequency :Y/R-Y/B-Y 13.5 MHz,
Quantization 10 bits/sample
—
Quantization 10 bits/sample
Remote
Output
Parallel remote
Modular connector 8-pin x 1(Assignable)
Line A
Composite
Y/C
Composite
BNC x 1, Loop-through, with 75 Ω automatic termination
4-pin mini-DIN x 1, Loop-through, with 75 Ω automatic termination
BNC x 1, Loop-through, with 75 Ω automatic termination
D1-SDI:
Line B
Monitor output
HD-SDI/D1-SDI:
BNC x 1, Output signal : amplitude 800 mVp-p 10%, BNC x 1, Output signal amplitude : 800 mVp-p 10%,
—
Output impedance : 75 Ω umbalanced
Output impedance : 75 Ω umbalanced
Audio output
Mini jack x 1, Loop-through
Headphones output
Speaker output
Mini jack x 1(Monaural), Loop-through
0.5 W (Monaural)
General
Power Consumption
Power requirement
Monitor : Approx. 24 W, With AC Adaptor : Approx. 28 W
AC 100 to 240 V, 50/60 Hz, 0.82 A, DC 12 V 2.2 A,
Rechargeable Battery Pack
Approx. 16 W, With AC Adaptor : Approx. 22 W
Approx. 15 W, With AC Adaptor : Approx. 20 W
AC 100 to 240 V, 50/60 Hz, 0.82 to 0.42 A, DC 12 V 1.6 A, AC 100 to 240 V, 50/60 Hz, 0.82 to 0.42 A, DC 12 V 1.5 A,
Rechargeable Battery Pack
Rechargeable Battery Pack
Operating Temparature
0 to 40 °C
Operating Humidity
30 to 85 % (No condensation)
700 to 1060 hPa
-20 to 60 °C
Operating/Storage/Trans. Pressure
Storage & Transport Temperature
Storage & Transport Humidity
Dimensions (W x H x D)
0 to 90 %
5
1
3
Approx. 216 x 206 x 136.1 mm (8 /8 x 8 /8 x 5 /8 inches)
5
1
3
Dimension with the supplied stand
Approx. 216 x 230 x 159.5 mm (8 /8 x 9 /8 x 6 /8 inches)
Dimension
and AC adaptor
with the supplied stand
Approx. 216 x 230 x 210 mm (8 5/8 x 9 1/8 x 8 3/8 inches)
Mass
Approx. 3.0 Kg (6 lb 10 oz)
Approx. 3.2 Kg ( 7 lb 1 oz)
Approx. 3.9 Kg (8 lb 10 oz)
Approx. 2.9 Kg (6 lb 6 oz)
Approx. 3.1 Kg (6 lb 13 oz)
Approx. 3.8 Kg (8 lb 6 oz)
Approx. 2.8 Kg (6 lb 3 oz)
Approx. 3.0 Kg (6 lb 10 oz)
Approx. 3.7 Kg (8 lb 3 oz)
With the supplied stand
With the supplied stand and AC adaptor
Supplied Accessories
AC adaptor (1), AC Cord (1), AC plug holder (1), Operating instructions (1), CD-ROM (1), Warranty card (1), Using the CD-ROM Manual (1)
Handheld Type
5
/
1
/
5
/
216 (8
)
8
107.5 (4
)
4
66.5 (2
)
8
1
/
37 (1
)
2
LMD-9050
LMD-9030
LMD-9020
11.5∞
5
/
23
/ )
32
142 (5
)
8
17.5 (
Unit: mm (inches)
17
Specifications
Multi-display
Type
LMD-7220W
LMD-5320
LMD-4420
Picture Performance
Type
Resolution
Pixel efficiency
a-Si TFT Active Matrix
320 x 234 dots
99.99%
480 x 234 dots
480 x 234 dots
Picture Size (H x W)
(Viewable area)
(Diagonal)
Approx. 154.1 x 86.6 mm
(Approx. 6 1/8 x 3 1/2 inches)
7 inches (176.7 mm)
Approx. 113.3 x 84.7 mm
(Approx. 4 1/2 x 3 3/8 inches)
5 5/8 inches (141.5 mm)
Approx. 82.1 x 61.8 mm
(Approx. 3 1/4 x 2 1/2 inches)
4 1/8 ihches (102.8mm)s
Aspect
Colors
16:9
4:3
Full color
Viewing Angle
Input/Output
Composite
Input
Output
OPTION IN
Remote
40°/65°/65°/65° (typical) (up/down/left/right contrast>10:1)
50°/30°/50°/50° (typical) (up/down/left/right contrast>10:1)
BNC (x 2), 1.0 Vp-p 2 dB, sync negative
BNC (x2), Loop through, Automatic 75 Ω termination
D-sub 9pin (x2)
BNC (x 3), 1.0 Vp-p 2 dB, sync negative
BNC (x 4), 1.0 Vp-p 2 dB, sync negative
BNC (x 4), Loop through, Automatic 75 Ω termination
D-sub 9pin (x4)
BNC (x 3), Loop through, Automatic 75 Ω termination
D-sub 9pin (x3)
Parallel
Modular 8 pin (x2)
Modular 8 pin (x3)
Modular 8 pin (x4)
General
Maximum: Approx. 26 W (with 2 x BKM-320D)
Maximum: Approx. 28 W (with 3 x BKM-320D)
Maximum: Approx. 26 W (with 4 x BKM-320D)
Power Consumption
Power requirement
Peak inrush current
Standard: Approx. 23 W (without optional input adaptor)
Standard: Approx. 22 W (without optional input adaptor)
Standard: Approx. 18 W (without optional input adaptor)
12V DC (with the supplied AC power adaptor), AC power adaptor:AC 100 to 240 V, 50/60 Hz
(1) Power on, current probe method:57A (230V)
(1) Power on, current probe method:55A (230V)
(1) Power on, current probe method:53A (230V)
(2) Hot switching inrush current, measured in accordance with European standard EN55103-1:8A (230V)
Operating Temperature
Operating Humidity
0 to 35°C (32 to 95°F)
30 to 85 % (no condensation)
-10 to 40°C (14 to 104°F)
0 to 90 %
Storage & Transport Temperature
Storage & Transport Humidity
Operating / Storage / Trans. Pressure
Dimensions (W x H x D)
Dimension including AC adaptor and
BKM-320D
700 hPa to 1060 hPa
1
7
1
7
1
7
482 x 133 x 47 mm (19 x 5 /4 x 1 /8 inches)*
482 x 133 x 116 mm (19 x 5 1/4 x 4 5/8 inches)
Approx. 2.3Kg (Approx. 5 lb 1 oz)**
482 x 133 x 47 mm (19 x 5 /4 x 1 /8 inches)*
482 x 133 x 116 mm (19 x 5 1/4 x 4 5/8 inches)
Approx. 2.3Kg (Approx. 5 lb 1 oz)**
482 x 88.1 x 47 mm (19 x 3 /2 x 1 /8 inches)*
482 x 88.1 x 116 mm (19 x 3 1/2 x 4 5/8 inches)
Approx. 1.9Kg (Approx. 4 lb 3 oz)**
Mass
Supplied Accessories
AC power adaptor (1), AC Power Cord (1), AC plug holder (1), Screws for AC adaptor holder (2), Operating Instructions (1), Warranty Card (1)
* without the projection parts ** Excluding supplied accessories.
Multi-display Type
LMD-7220W
7
/
47 (1
)
8
482 (19)
LMD-5320
LMD-4420
7
/
47 (1
)
8
482 (19)
7
/
47 (1
)
8
482 (19)
Unit: mm (inches)
18
Feature Comparison
Studio Type
One-piece Type
LMD-322W
MEU-WX2
LMD-232W
MEU-WX2
LMD-212
LMD-172W
MEU-WX2
LMD-152
LMD-2020 LMD-1420 LMD-2010 LMD-1410
Monitor System
MEU-WX2
MEU-WX2
Picture Resolution
Picture Size
1280x 768dots
31.6-inch
1024 x 768dots
23-inch
1024 x 768dots
21.2-inch
1280 x 768 dots
16.7-inch
1024 x 768 dots
15-inch
640 x 480 dots
20.1-inch
14-inch
20.1-inch
14-inch
LCD Panel
a-Si TFT Active Matrix
a-Si TFT Active Matrix
Acceptable computer system
Panel aspect Ratio
Protection Panel/AR Coating
16:9 Capability
VGA to WXGA
No
4:3
15:9
4:3
Yes
Yes
HD/SD
1x
15:9
4:3
Yes
No
No
No
No
Yes
SD only
2x
1x
1x
HD or SD
Composite Video Input/Output
Y/C Input/Output
Component (Y,R-Y,B-Y)/RGB Input
SD-SDI video input
HD-SDI video input
SDI with Audio decoding
Computer Input
I.Link video input
Audio Input/Output
External Sync Input/Output
EIA 19-inch Rack Mounting
VESA Mounting
1x
1x
2x (with BKM-220D or BKM-243HS)
1x (with BKM-320D)
2x (with BKM-243HS)
No
No
No
No
Yes
Yes
Yes
2x (with BKM-255DV)
Yes
Yes
Yes
No
MB-523
75 x 75 holes
SU-558
Yes
Selectable
Yes
MB-522A
MB-524
MB-527
MB-526
MB-527
MB-526
100 x 100 holes
Stand supplied
Yes
Not Applicable
Floor Srand SU-559
Desk-top Stand
Overscan
Color Temperature
Blue Only
Selectable
Yes
H/V delay
Yes
No
Tally
Area Marker
No
3-Color
Yes
3-Color
Yes
No
No
Li-Ion battery Operation
No
No
No
LMD-322W:No
LMD-232W:Yes
LMD-212:Yes
LMD-172W:Yes
LMD-152:Yes
DC Operation
MEU+LMD-322W:No MEU+LMD-232W:No
MEU+LMD-212:No MEU+LMD-172W:Yes MEU+LMD-152:Yes
Handheld Type
Multi-display Type
Monitor System
Picture Resolution
Picture Size
LMD-9050
1024 x 768 dots
LMD-9030
LMD-9020
LMD-7220W
480 x 234 dots
2x7-inch
LMD-5320
320 x 234 dots
3x5.6-inch
LMD-4420
480 x 234 dots
4x4-inch
640 x 480 dots
8.4-inch
LCD Panel
a-Si TFT Active Matrix
a-Si TFT Active Matrix
No
Acceptable computer system
Panel Aspect Ratio
Protection Panel/AR Coating
16:9 Capability
No
4:3
Yes
Yes
SD only
2x
1x
1x
1x
No
16:9
Yes
4:3
No
No
HD or SD
HD/SD
No
SD only
1x
No
No
Composite Video Input/Output
Y/C Input/Output
Component (Y,R-Y,B-Y)/RGB Input
SD-SDI Video Input
HD-SDI Video Input
SDI with Audio decoding
Computer Input
1x (with BKM-320D)
2xHD or SD Auto detective
No
No
No
No
No
Yes
No
i.Link Video Input
Audio Input/Output
External Sync Input/Output
EIA 19-inch Rack Mounting
VESA Mounting
No
Yes
Yes
No
No
No
Supplied
Not Applicable
Not Applicable
No
MB-525
Not Applicable
Stand supplied
Yes
Desk-top Stand
Overscan
Color Temperature
Blue Only
Selectable
Yes
Selectable
No
H/V delay
No
No
Tally
Area Marker
3-Color
Yes
3-Color
No
Li-Ion Battery Operation
DC Operation
Yes
Yes
No
Yes
19
Distributed by
©2006 Sony Corporation. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Images on monitors are simulated.
Sony, ChromaTRU and LUMA are trademarks of Sony Corporation.
VESA is a trademark of the Video Electronics Standards Association.
All other trademarks are the property of their respective owners.
MK10231V2IW06JAN
|
GE General Electric Convection Oven SCB 1001 User Manual
Frigidaire FFGF3017L User Manual
Dynex DX WDCMBO User Manual
Dell E770p User Manual
Cypress Perform CY7C1413BV18 User Manual
Cypress CY7C1475BV33 User Manual
Computer Tech Link 7cln User Manual
ClearOne comm Chat 150 User Manual
CDA HVN 32 User Manual
Black Box Computer Hardware VX HDV 4P User Manual