Product Data Document
420DS-0d
July 16, 2007 - Page 1
Bristol® ControlWave® Micro
Integrated Enclosure Solutions
Designed and built for out-of- the-box
installation and startup
For years, our panel shop has been setting the
standard for quality design, assembly and testing
of custom enclosures and cabinets. Now Emerson
Process Management brings that experience to the
Bristol® ControlWave® Micro to provide a plug-and-
play installation solution.
Benefits
•
Eliminates the need for in-house panel design
and fabrication
Ideal SCADA Solution
•
•
Design standardization minimizes cost
Rely on the experience of professionals for cost
effective packages designed for your specific
applications
Emerson has been a pioneer of innovative SCADA
solutions throughout the modern era of SCADA.
Over these two decades we have gained the knowl-
edge, experience and skill to engineer the afford-
able solutions you need.
•
Fabrication by UL 508 certified panel shop
assures electrical code compliance
The ControlWave Micro integrated enclosure solu-
tion is the ideal answer to your SCADA require-
ments for flexibility, quality and budget control.
•
•
Avoids delay in custom panel quoting
Two-week delivery on most common
configurations helps you to plan installation and
startup sooner
Applications
•
•
•
All components and options are tested together
allowing trouble-free startup
The programmability of ControlWave and the flex-
ibility of the integrated enclosure solution allows for
a wide range of water & wastewater, oil & gas and
energy distribution application.
Standardizes the maintenance effort to reduce
maintenance cost
Emerson quality ensures long term reliability
and lower cost of ownership over the product
lifecycle
•
•
•
•
Pump and lift station RTU
Gas measurement SCADA RTU
Pressure Recorder (1 to 4 sensors)
Water Quality Monitor when combined with the
Six-Cense™ water quality sensor
•
SCADA Security Monitor with event detection,
entry/access control and video storage
Remote Automation Solutions
Product Data Document
420DS-0d
July 16, 2007 - Page 3
Bristol® ControlWave® Micro Enclosures
In addition to the basic functions and function
blocks, ControlWave Designer brings the benefit
of over twenty years of SCADA and plant control
experience in Emerson’s Bristol ACCOL III function
block library. ACCOL III empowers the programmer
with over sixty ready-to-use process control function
blocks valuable for use in oil & gas, water & waste
and process measurement & control applications.
ControlWave also provides local historical data stor-
age and alarming with time stamps to ensure the
integrity of all data in the event of an interruption in
network communication.
Features
•
•
High Speed processor
Very low power consumption minimizes power
supply, solar and battery backup requirements
•
•
Worldwide standard IEC 61131-3 programming
with ACCOL 3
Multiple protocol support BSAP, Modbus, DNP3,
DF1 & CIP
•
•
•
•
Built-in 100 Mbps Ethernet port
ControlWave has been designed around open
standards to enable the engineer to employ famil-
iar technologies to maximize system flexibility and
expansion. With Emerson’s Bristol OpenBSI (Open
Bristol System Interface) communications interface
and Active X controls you can even build a local
HMI or use the OPC Server to provide data to any
OPC compliant PC based HMI.
Up to eleven serial communication ports
Built-in Modem and Radio options
On-board Alarm & Historical database ensures
highest data integrity
•
•
Built-in FTP server
Wide temperature range (-40 to +70ºC)
ControlWave Micro conveniently combines the
speed of a PLC, the programming power of a DCS,
the low current consumption and flexible communi-
cations of an RTU. ControlWave Micro is truly the
most versatile and cost effective SCADA and control
system available.
Industry Standard Programmability
Engineers will appreciate the ControlWave Designer
with ACCOL III programming software. Its confor-
mance to the IEC61131-3 programming standard
enables them to quickly start projects, re-use exist-
ing code and simplify maintenance in the long term.
All five IEC languages are supported, as well as
multitasking of up to 100 simultaneous programs.
information and enclosure drawings.
Remote Automation Solutions
Product Data Document
420DS-0d
July 16, 2007 - Page 4
Bristol® ControlWave® Micro Enclosures
© 2007 Remote Automation Solutions, division of Emerson Process Management. All rights reserved.
Bristol, Inc., Bristol Babcock Ltd, Bristol Canada, BBI SA de CV and the Flow Computer Division , are wholly owned subsidiaries of Emerson Electric Co. doing business as Remote Auto-
mation Solutions (“RAS”), a division of Emerson Process Management. FloBoss, ROCLINK, Bristol, Bristol Babcock, ControlWave, TeleFlow and Helicoid are trademarks of RAS. AMS,
PlantWeb and the PlantWeb logo are marks of Emerson Electric Co. The Emerson logo is a trademark and service mark of the Emerson Electric Co. All other marks are property of their
respective owners.
The contents of this publication are presented for informational purposes only. While every effort has been made to ensure informational accuracy, they are not to be construed as war-
ranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. RAS reserves the right to modify or improve the designs or
specifications of such products at any time without notice. All sales are governed by RAS’ terms and conditions which are available upon request. RAS does not assume responsibility for
the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any RAS product remains solely with the purchaser and end-user.
Emerson Process Management
Remote Automation Solutions
Watertown, CT 06795 USA
Mississauga, ON 06795 Canada
Worcester WR3 8YB UK
T 1 (860) 945-2200
T 1 (905) 362-0880
T 44 (1) 905-856950
|