Dell PowerVault K086P User Manual

Getting Started With Your System

Introdução ao seu Sistema

Erste Schritte mit dem System

Iniciación al sistema

Mise en route du système

46C1839

P/N K086P

APRIL 2009

PowerVault 114X

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, PowerVault, and the DELL logo are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their

products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Important Information – Please read prior to using the

RD1000 drive bay in your Dell™ PowerVault™ 114X

Note: If you are loading a DRMK or DOS utility, your system may hang if you have an RD1000 cartridge

inserted into the RD1000 drive bay. If this occurs, eject the RD1000 cartridge and reboot the system. To

address this issue, Dell recommends that you follow the steps below to verify that the latest system BIOS

version is on your system.

1 Verify your system BIOS version in the System Setup program. See “Using the System Setup Program” in the system

documentation included on the CDs provided with your system or on support.dell.com.

2 Verify the latest system BIOS version available on support.dell.com.

3 Download and flash the latest BIOS version if necessary.