User's Guide
dell.com/regulatory_compliance
DellTM OptiPlexTM 780-USFF All In One (AIO) Stand
The Dell OptiPlex 780-USFF All-in-One Stand is a unique
mounting solution with integrated cable management
designed to adapt to your unique environment.
1/15
Contents
1 About your Dell OptiPlex 780-USFF AIO Stand ……………………………………………….. 4
2 Setting up the Dell OptiPlex 780-USFF AIO Stand ……………………………………………. 6
3 Specifications …………………………………………………………………………................... 15
4 Finding Information ……………………………………………………………………................. 15
3/15
About your Dell OptiPlex 780-USFF AIO Stand
1
1 DELL Monitor: P190S/1909W/P2210
2 DELL Quick Release Monitor Mounting Plate
3 System Sleeve
4 System Chassis: Dell OptiPlex 780-USFF
5 Cable Tray
6 Cable Channels
7 Swiveling Base - 360o Pan
8 Front Cable Cover
9 Provided Cables: VGA and USB
4/15
10 Handle
11 System Cable Cover Lock Switch
12 System Label Carrier
13 System Cable Cover
14 Padlock Ring
15 Network Cable Slot
16 Wall Power Cord Slot
17 System Lock Switch
18 Kensington Security Slot
5/15
Setting up the Dell OptiPlex 780-USFF AIO Stand
2
Components
AIO Stand, Cable Cover, System Sleeve, VGA / USB Cable
NOTE：Refer to the Monitor and System Instruction Guides, packaged separately.
______________________________________________________________________________________
Place the AIO Stand on a level, stable surface.
1
WARNING：To reduce risk of injury and/or
equipment damage, the AIO Stand must be
placed on a level, stable surface.
6/15
Determine which monitor cable will be used (VGA or DisplayPort), and follow appropriate
instructions.
2
Locate the provided VGA cable.
a
VGA
b Route the VGA cable through the cable tray.
DisplayPort
Locate the system-end of the cable in the cable tray.
a
b
Remove the front cable cover to locate the monitor-end of the cable.
7/15
Attach the monitor to the AIO stand.
3
Connect the power plug, the monitor cable (VGA or DisplayPort), and the USB cable to the
monitor.
4
DisplayPort
8/15
Route the accessory cable (keyboard, mouse, speakers, etc.) through the cable tray.
5
Ensure the system sleeve is unlocked (orange tab will show).
6
9/15
7 a
Extend the system label carrier.
If applicable, remove mylar from front surface(s) of chassis prior to sleeve installation.
Insert the system into the system sleeve in the orientation illustrated below.
b
CAUTION：
Do not reverse the
insertion orientation!
NOTE：When inserted
properly, the CD end of
the system will reach
the end of the system
sleeve.
Slide the switch to lock the system sleeve.
8
10/15
Ensure the AIO stand is unlocked (orange tab will show).
9
Slide the system sleeve onto the back of the AIO stand. Ensure that the cables do not
impede the sleeve from fully seating onto the stand.
10
11/15
Connect the monitor cable (VGA or DisplayPort), power plug, network cable and any
accessory cables, (keyboard, mouse, speaker, etc.) to the rear of the system.
11
12
a Slide the lock switch out to unlock the cable cover. With the system label carrier
extended, attach the cable cover underneath the label carrier and to the system sleeve.
Then push the system label carrier back to reveal the cable cover lock switch.
b
Slide the switch to lock the cable cover.
12/15
Slide the switch to lock the AIO stand.
13
Attach customer-supplied security accessories.
NOTE：These security features are only accessible when the AIO Stand lock is engaged as shown
in Step 13.
14
13/15
15
a Connect your facility network cable to the rear of the AIO stand to access the facility
network.
b
Connect the power cord supplied with the system to the rear of the AIO Stand and to
facility wall power.
______________________________________________________________________________________
Range of Motion
14/15
Specifications
3
Physical Dimensions*
Height
15 inches (380 mm)
9.6 inches (245 mm)
10.8 inches (275 mm)
8.0 lbs (3.7 kg)
Depth
Width
Weight
* not including monitor and system
Monitor and System Weight Capacities
Dell Monitor: P190S/1909W/P2210
Dell System: OptiPlex 780-USFF
≦ 10.1 lbs (4.6 kg)
≦ 7 lbs (3.2 kg)
Temperature
Operating
32oF to 95℉ (0oC to 35oC)
-40oF to 149℉ (-40oC to +69oC)
-40oF to 149℉ (-40oC to +69oC)
Storage
Transportation
Power Ratings
Input
100-120 V~, 50/60 HZ, 3.5 A
220-240 V~, 50/60 HZ, 1.75 A
100-120 V~, 50/60 HZ, 1.5 A
220-240 V~, 50/60 HZ, 0.75 A
100-120 V~, 50/60 HZ, 2.0 A
220-240 V~, 50/60 HZ, 1.0 A
Output - Monitor Port
Computer Port
Security Features
Kensington Security Slot
Padlock Ring
Accepts standard Kensington Slim MicroSaver
Accepts Padlocks with shaft diameter of 3 - 8 mm
Finding Information
If you need to:
See:
Find safety best practices information for your computer,
review Warranty information, Terms and Conditions (U.S.
only), Safety instructions, Regulatory information,
Ergonomics information, and End User Agreement.
The safety and regulatory documents that shipped with
your computer and the Regulatory Compliance
15/15
|