Daewoo DQR 1000D User Manual

Owner’s Manual

EN GLISH

DVD RECO RDER

DQR-1000D/ DQR-1100D

P/N : 97P95600D0-U2

Be fo re y o u u se y o u r DVD re co rd e r

DVD, DVD+R, DVD+RW ?

W h ich d iscs y o u ca n u se

The following discs can be used in your DVD recorder for playback and recording:

Wha t is a DVD?

DVD (Digital Versatile Disc) is a new storage medium that combines the convenience of the compact disc with

the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables

an entire feature film to be stored on a single five inch disc.

Pla yba ck a nd recording

DVD+RW (Digital Versatile Disc + rewritable)

DVD+R (Digital Versatile Disc + recordable)

How good is the resolution of DVD com pa red w ith VHS?

Pla yba ck only:

The razor-sharp digital images have a resolution of more than 500 lines of 720 pixels per line. This is more than

twice as high as VHS and is even better than the laser disc. Its picture quality is easily comparable to the digital

masters produced in recording studios.

DVD Video (Digital Versatile Disc)

DVD-R (DVD-Recordable)

DVD-RW (DVD-Rewritable) : These discs can only be played back if the recording was made in video mode and

the recording was finalised.

Wha t ca n DVD+RW do?

DVD+ReWritable uses phase change media, the same technology on which rewritable CDs are based. A high-

performance laser is used to change the reflective properties of the recording layer; this process can be

repeated more than a thousand times.

Audio CD (Compact Disc Digital Audio)

Super Audio CD (Only plays the CD layer of a hybrid SACD disc)

Video CD (format 1.0, 1.1, 2.0)

Wha t ca n the DVD+R do?

Super Video CD

DVD+R (write-once DVD). Unlike a DVD+RW disc, this disc can only be written to once. If it is not finalized after

a recording, further recordings can be added to it. Old recordings can be later deleted but they can no longer be

overwritten. The deleted recordings (titles) are marked 'deleted title '.

CD-R (CD recordable) Audio/ MP3 contents

CD-RW (CD rewritable) Audio/ MP3 contents

Before this disc can be played in a DVD player, it must be finalised in the DVD recorder. Once this process is

complete, no further recordings can be added.

Wha t ca n m y DVD recorder do?

Re g io n a l co d e

Your DVD recorder is a machine for recording and playing back digital video discs with "two-way" compatibility

with the universal DVD video standard. This means:

If the region number described on the DVD disc does not correspond to the

Region number of this player, the player will not play this disc.

•

existing DVD video discs can be played on the recorder.

recordings made on your DVD recorder can be played on other DVD video players and DVD ROM drives.

ALL

Co n te n ts

Id e n tifica tio n o f Co n tro ls

Pro d u ct In fo rm a tio n

Re co rd in g

Fro n t p a n e l

Sa fe ty In stru ctio n s _____________________________1

Be fo re y o u u se y o u r DVD re co rd e r ____________2

Co n te n ts _______________________________________4

Id e n tifica tio n o f Co n tro ls_______________________5

Ma n u a l re co rd in g ______________________________3 3

General information

@ #

^ & * ( )

Recording without automatic switch off

Interrupt recording (Pause)

Recording with automatic switch off (OTR)

Protecting the disc against accidental recording

Lining up recordings within a title (assemble cut)

Selecting the recording mode (quality)

Automatic recording from a satellite receiver

In sta lla tio n

Co n n e ctin g y o u r DVD re co rd e r to th e TV se t ___1 2

Co n n e ctin g a d d itio n a l d e vice s _________________1 4

123 4

Ma n a g in g th e d isc co n te n ts____________________4 0

General information / Editing recording titles (name)

Playing back titles / Erasing a recording/title

Disc settings / Edit Menu

In sta llin g y o u r DVD re co rd e r __________________1 6

Initial installation / Using a satellite receiver

Automatic TV channel search (Autoinstall)

Manual TV search

STANDBY/ ON

)

To switch off or on, interrupt a function, interrupt

a programmed recording (TIMER)

Select next chapter (track) /search forwards

Pro g ra m m in g a re co rd in g (TIMER)_____________4 7

General information

DV i Link / DV sock et (digita l video input, IEEE 1 3 9 4 ,

Sorting and clearing TV channels manually

Setting the time and date

DQ R-1 1 0 0 D O n ly

PR –

FireWire)

Programming a recording (with the ShowView System)

Lower programme number

PR +

Connecting a digital camcorder or other suitable

device (programme number 'CAM2')

Programming a recording (without the ShowView

System)

S Video sock et

Higher programme number

OUTPUT

How to check, change or delete a programmed

Pla y b a ck

Connection of SVHS/Hi8 camcorders or SVHS/Hi8

video recorders (programme number 'CAM1')

Switching between sockets S-VIDEO and VIDEO is

done automatically. In case both sockets are used, the

signal received at socket S-VIDEO is treated with

priority.

recording NexTView Link

This button lets you switch between the internal

tuner and the playback of the DVD

In fo rm a tio n o n th e TV scre e n __________________2 2

Pla y b a ck ______________________________________2 4

Inserting a disc / Playing a DVD video disc

Playing a DVD+RW/+R disc

Opera tion Displa y Window

Displays the operation of the device, for more

information, see the next page

Video input sock et

Playing an audio CD / Playing an MP3 CD

Playing a (Super) Video CD

Se tu p

(

OPEN/ CLOSE

Connection of camcorders or video recorders

(programme number 'CAM1')

Open/close disc tray

Use r p re fe re n ce s _______________________________5 1

Picture settings / Sound settings

Ad d itio n a l p la y b a ck fe a tu re s __________________2 9

Changing to another title/chapter

Searching a disc / Still picture / Slow motion

Search by time / Repeat/Shuffle play

Scan feature

Audio input sock et left/ right

STOP

Connection of camcorders or video recorders

(programme number 'CAM1')

Interrupt playback/recording

Language settings / Additional settings

Acce ss co n tro l _________________________________5 5

Parental level control (DVD video only)

Changing the PIN code

Disc tra y

Select previous chapter (track) /search backwards

REC/ OTR

PLAY/ PAUSE

Record the current TV channel

Zoom feature / Camera angle

Play back recorded disc, interrupt playback, still

picture

Changing the audio language / Subtitles

Misce lla n e o u s

Be fo re y o u ca ll a n e n g in e e r ___________________5 8

Te ch n ica l d a ta _________________________________6 3

Id e n tifica tio n o f Co n tro ls

O p e ra tio n Disp la y W in d o w

Re a r p a n e l

REC a nd TIMER REC displa y

To be Timer-recorded

Recording

TIMER Recording /OTR (One Touch Recording)

(

TITLE

Displays the title number selected/played (DVD)

Ma ins sock et

^ Digita l a udio output

CHAPTER

Connection to the mains supply

Aeria l input

Connection of a digital audio device (amplifier/

receiver)

Displays the chapter selected/played

Tim e, Counter a nd Current Opera tion

Tray is opened

(

Aeria l output

Connection of the aerial

Sca rt sock et 2

Tray is closed

Connection of the TV set

Sca rt sock et 1

Disc is loaded

There is no disc in tray

Menu screen is displayed

Power is ON

Connection of an additional device (satellite

receiver, set-top box, video recorder, camcorder,

etc.)

Disc has some error

Setup menu is displayed

Power is OFF

Connection of a TV set. RGB-output

Ana logue a udio output

Video output

Connection of a TV set with audio input sockets

or connection of an additional device

Connection for a TV set with a video input (CVBS,

Composite Video)

Dolby Digita l Indica tor

dts Disc Indica tor

S Video output

Connection for an S-Video compatible TV set

MP3 Disc Indica tor

Disc Type Indica tor

Currently loaded disc type (SVCD, VCD, DVD, CD etc.) is displayed.

Disc Opera tion

Id e n tifica tio n o f Co n tro ls

Re m o te Co n tro l

^[DVD]Next/Previous programme number

^[TV]TV Mute

^[DVD]Select previous title/search backwards :

^{[TV, DVD]}To switch set on or off, interrupt menu function,

interrupt a programmed recording (TIMER)

• Briefly press the button during playback: Previous

chapter/film or previous title

^[TV]TV mode select

• Hold down the button: Search backwards

^[DVD]Playback/pause : Play back a disc.

^[DVD]Switches the scart socket EURO AV2 directly to the TV set.

This lets you watch the picture from any unit connected to

this scart socket (set-top box, video recorder or satellite

receiver) and at the same time record from another source.

• If this button is pressed during playback, the DVD recorder

switches to pause. You will see a still picture.

• If this button is pressed during recording, the DVD recorder

will also switch to pause.

^[DVD]DVD mode select

^[DVD]Select next title/search forwards :

• Briefly press the button during playback: Next chapter/film or

next title

^{[TV, DVD]}Number buttons

• Hold down the button: Search forwards

^[DVD]Record the current TV channel

^[TV]Select the TV AV

^[DVD]Stop playback / recording, except with programmed

recordings (TIMER). Hold down the button to open and

close the disc tray.

^[DVD]This button lets you switch between the (internal) TV tuner

in the DVD recorder (TV picture on the TV set) and playback

on the DVD recorder

^[DVD]To store or confirm entry

^[DVD]To select the maximum possible record time

^[DVD]Slow reverse/forward playback

^[DVD]To show the DVD menu or the index screen

^[DVD]To change angle, when the disc supports multi-angle

^[DVD]Call up/cancel the main menu (menu bar at the top of the

screen)

^[DVD]To magnify(zoom) a specific part of screen.

^[DVD]Subtitle language select

^[DVD]Cursor keys : Left, right, up, down

^[TV]Increase/Reduce TV volume (only for supported TV)

^[DVD]Audio language select

^[DVD]To program recordings with the ShowView system /

without the ShowView system or to alter/clear

programmed recordings

^[DVD]Title/Chapter : Choose the 'T'(Title)/'C'(Chapter) directly

from the menu bar

^[DVD]Choose between repeat, shuffle play and intro-scan. And

repeat consists of title repeat/chapter repeat/ repeat A-B

^[DVD]For displaying the edit menu for DVD+(RW) discs, for

setting chapter markers

^[DVD]Select function/value

^[DVD]Return to previous menu on a video CD (VCD). This function

works also on some DVD's.

^[DVD]To delete last entry or clear programmed recording (TIMER)

Id e n tifica tio n o f Co n tro ls

Pro g ra m m e th e Re m o te fo r a TV

In stru ctio n s in u sin g re m o te co n tro l

•

Operate remote control within 7m from the unit.

Turn on the TV.

•

Do not press 2 (two) buttons at the same time.

Point the DVR's remote at the TV.

Do not allow bright light to fall directly on the sending part of remote control.

Do not keep in a place with too much dust or humidity.

Holding the TV button down, press the two numbers listed below that is relevant to your brand of TV.

After releasing the buttons, check that the remote is programmed to operate your TV.

If the above does not work, repeat steps 2 - 4 using one of the alternative 2 digit codes.

N O Ma k e r (Bra n d ) N a m e

Co d e N u m b e r (2 d ig it) List

02 07 30 67

27 28

23 50 56

34 37

N O Ma k e r (Bra n d ) N a m e

38 MIVAR

39 NEC

40 NOKIA

41 NORDMENDE

42 ORION

43 PANASONIC

44 PHILIPS

45 PHONOLA

46 PIONEER

47 POLYTRON

48 PYE

49 RADIOLA

50 RADIOMARELLI

51 REX

Co d e N u m b e r (2 d ig it) List

26 64 76

Ba tte r y In sta lla tio n

Remove the battery compartment cover.

AIWA

AKAI

AKARI

BANG& OLUFSEN

BLAUPUNKT

BRANDT

BRIONVEGA

BLUESKY

BUSH

30 32 40 78 80

02 23 47 50 56

02 37 40

03 33 40 43

02 20 34 37 82

02 20 37 82

23 40 72

02 37 74

34 37

02 20 34 37 82

23 40 47 50 56 82

40 80

02 06 08 37 38 48 54

06 62

Insert two “AAA“ dry batteries. Make sure that the batteries are inserted with their positive “+“ and

negative “–“ poles positioned correctly.

Close the cover.

10 CGE

11 CONTINETAL EDISON

12 CURTIS

13 DAEWOO

14 DESMET

15 DUAL

16 ELBE

17 ELEMIS

18 FERGUSON

19 FINLUX

02 22 65

34 37

25 27 40

52 SABA

53 SALORA

54 SAMSUNG

55 SANYO

23 42 47 50 56 57 58

02 63 77 82

56 SANSUI

Acce sso rie s

20 FISHER

21 FORMENTI

22 FUNAI

57 SBR

58 SCHAUB-LORENZ

59 SCHNEIDER

60 SELECO

61 SHARP

62 SIEMENS

63 SINGER

64 SINUDYNE

65 SONITRON

66 SONY

67 TELEAVIA

68 TELEFUNKEN

69 THOMSON

70 TOSHIBA

71 WEGA

02 40 64

02 07 20 34 37 82

34 40 78

24 62

27 28

23 82

Remote Control

2 Batteries

RF cable

Scart Cable

Owner’s Manual/

Warranty

23 GOLDSTAR(LG)

24 GOODMANS

25 GRUNDIG

26 HITACHI

27 IMPERIAL

28 INNO HIT

29 IRRADIO

30 ITT

31 JVC

32 KNEISSEL

33 LOEWE

34 LOEWE OPTA

35 LUXOR

02 37 68

34 37

27 28 63 64

44 37 52

04 07 45 46 53

02 22

02 34

02 82

34 37 82

60 62 83

02 23 50

02 23 47 50 55 56

02 23 47 50 56

35 62 63 64

To purchase these accessories ( with the exception of this owner’s manual ) and other non supplied parts,

please contact your nearest dealer or service centre.

72 WHITE WESTINGHOUSE 34 37

36 METZ

37 MITSUBISHI

27 37 46 82

02 34 62 75

73 YOKAN

74 YOKO

02 22

1 0

1 1

Co n n e ctin g y o u r DVD re co rd e r to th e TV se t

The necessary cable connections must be made before you can record or playback TV programmes using your

DVD recorder. Connect the DVD recorder directly to your TV set. If there is a video recorder in between, the

picture quality may be poor because of the copy protection system built into the DVD recorder. We recommend

that you use a scart cable to connect your TV set and DVD recorder.

When you install your DVD recorder for the first time, select one of the following options:

O p tio n 1 : Co n n e ctin g w ith a sca r t ca b le

Switch off your TV set. Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the

back of the DVD recorder.

Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the

other end into the aerial input socket at the back of the TV set.

Plug a scart cable into the scart socket EURO AV1 at the back of the DVD recorder and the corresponding

scart socket at the back of the TV set .

Switch on the TV set. Insert one end of the supplied mains cable into the mains socket at the back of the

DVD recorder and the other end into the wall socket.

O p tio n 3 : Co n n e ctin g w ith vid e o (CVBS) ca b le

Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the back of the DVD

recorder.

Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the

other end into the aerial input socket at the back of the TV set.

Insert one end of the supplied video (CVBS) cable into the yellow Phono socket VIDEO (CVBS) at the back of

the DVD recorder and the other end into the video input socket (usually yellow) on the TV set.

Insert one end of the supplied audio (Phono) cable into the white/red Phono socket AUDIO L/R at the back of

the DVD recorder and the other end into the audio input socket (usually white/red) on the TV set.

Switch on the TV set. Insert one end of the supplied mains cable into the mains socket MAINS at the back

of the DVD recorder and the other end into the wall socket.

3 , 4

O p tio n 2 : Co n n e ctin g w ith a n S-Vid e o (Y/ C) ca b le

Remove the aerial cable plug from your TV set. Insert it into the ANT.IN socket at the back of the DVD

recorder.

Insert one end of the supplied aerial cable into the ANT.OUT socket at the back of the DVD recorder and the

other end into the aerial input socket at the back of the TV set.

Insert one end of a S-Video (SVHS) cable into the S-VIDEO OUT (Y/C) socket at the back of the DVD recorder

and the other end into the S-Video (SVHS) input socket on the TV set.

Insert one end of the supplied audio (Phono) cable into the white/red Phono socket AUDIO L/R at the back of

the DVD recorder and the other end into the audio input socket (usually white/red) on the TV set.

Switch on the TV set. Insert one end of the supplied mains cable into the mains socket MAINS at the back

of the DVD recorder and the other end into the wall socket.

1 2

1 3

Co n n e ctin g a d d itio n a l d e vice s

Co n n e ctin g a d d itio n a l d e vice s to th e se co n d sca r t so ck e t

Co n n e ctin g a u d io d e vice s to th e a n a lo g u e a u d io so ck e ts

You can connect additional devices such as decoders, satellite receivers,

Two analogue audio sockets AUDIO L/R (audio signal output left/right) are

camcorders, etc. to the EURO AV2 socket. When playback is started on this

additional device the DVD recorder automatically connects the EURO AV2

scart socket with the EURO AV1 scart socket. You will then see the picture

from the additional device on your TV set, even if the DVD recorder is

switched off.

located at the back of the DVD recorder.

These can be used to connect the following:

•

a receiver with Dolby Surround Pro Logic

a receiver with two channel analogue stereo

The TV/DVD button on the remote control allows you to switch between

playback through the EURO AV2 scart socket and playback from the DVD

recorder.

Co n n e ctin g a u d io d e vice s to th e d ig ita l a u d io so ck e t

At the back of the DVD recorder there is a digital audio output socket

Co n n e ctin g a d d itio n a l vid e o re co rd e rs

You can connect a video recorder to the EURO AV2 socket.

DIGITAL AUDIO OUT for a coaxial cable.

This can be used to connect the following:

•

an A/V receiver or an A/V amplifier with a digital multi channel sound

decoder

•

If you have an SVHS video recorder, you can additionally use the S-VIDEO OUT

(Y/C) socket and the AUDIO L/R sockets.

•

a receiver with two channel digital stereo (PCM:Pulse Code Modulation)

DQ R-1 1 0 0 D O n ly

Co n n e ct ca m co rd e r to th e fro n t so ck e ts

To copy camcorder recordings, you can use the front sockets. These sockets

are located behind the flap on the left hand side.

Best Picture Qua lity

If you have a DV or Digital 8 camcorder, connect the DV input of the DVD

recorder to the appropriate DV output on the camcorder.

Very good Picture Qua lity

If you have a Hi8 or S-VHS(C) camcorder, connect the S-VIDEO input of the

DVD recorder to the appropriate S-VHS output on the camcorder.

You must also connect the audio input AUDIO L/R on the DVD recorder to

the audio output on the camcorder.

Good Picture Qua lity

If you have a camcorder that only has a single video output (Composite

Video, CVBS), connect the VIDEO input on the DVD recorder to the

appropriate output on the camcorder.

You must also connect the audio input AUDIO L/R on the DVD recorder to

the audio output on the camcorder.

1 4

1 5

In sta llin g y o u r DVD re co rd e r

In itia l in sta lla tio n

After successfully connecting your DVD recorder to the TV set and other additional devices, this chapter will

show you how to start the initial installation.

O n scre e n m e n u ?

The multi-language on-screen menu takes the mystery out of using your new

DVD recorder. All settings and/or functions are displayed on your TV screen in

the relevant language.

The DVD recorder automatically seeks out and stores all available TV channels.

Virgin mode

Select the desired language for the on-screen menu by pressing […] or

[†].

Au d io la n g u a g e ?

Menu language

English

The DVD will play the sound in the language you select, provided this language

is available on the disc. If it is not available on the disc the first language on

the DVD will be used instead. The DVD Video Disc menu, if available, will also

be displayed in the language you select.

Español

Français

Confirm with [OK].

Italiano

Deutsch

Press OK to continue

Su b title la n g u a g e ?

Virgin mode

Select the desired audio language using […] or [†].

Audio language

English

The subtitles will be displayed in the language you select, provided this

language is available on the disc. If it is not available on the disc the first

language on the DVD will be used instead.

Español

Confirm with [OK].

Français

Italiano

Deutsch

Press OK to continue

TV Sh a p e ?

'4:3 letterbox' for wide-screen (cinema format) with black borders at the top and

bottom of the screen.

'4:3 panscan' for a full-height picture with cropped edges.

'16:9' for a wide-screen TV set (screen edge ratio 16:9)

Virgin mode

Select the desired language for the subtitles by pressing […] or [†] .

Subtitle language

English

Español

Confirm with [OK].

Français

Italiano

Deutsch

W h y d o I h a ve to se t th e co u n try ?

To call up the specific settings for the respective country, you must first install

the country.

Press OK to continue

Virgin mode

Select the desired screen format position using […] or [†]. These

settings will only be used if you insert a DVD that contains this

information.

TV shape

4:3 letterbox

Th e DVD re co rd e r ca n n o t fin d a n y TV sta tio n s.

4:3 panscan

16:9

•

Select channel 1 on the TV set. Can you see the stored TV channel on the

TV set? If not, check the cable connection from the aerial (aerial socket) to

the DVD recorder and to the TV set.

Confirm with [OK].

Press OK to continue

•

The DVD recorder searches the entire frequency range in order to find and

store the largest possible number of TV channels. It is possible that the TV

channels in your country are broadcast in a higher frequency range. As

soon as this range is reached during the search, the DVD recorder will find

the TV channels.

Virgin mode

Select your country with […] or [†]. If your country does not appear,

select 'others’.

Country

Austria

Belgium

Denmark

Finland

France

1 0 Confirm with [OK].

Press OK to continue

•

If no aerial is connected, complete the basic settings and then, if desired,

start the automatic channel search (see section 'Automatic TV channel

search (Autom. search)').

1 1 After you connect the aerial (or cable TV, satellite receiver, etc.) to the

If you have connected

the aerial •

DVD recorder, press [OK].

press OK

To continue

Press OK

Usin g a sa te llite re ce ive r

Installation

1 2 'Autoinstall' starts. Wait until all available TV channels have been

Autom. search

TV channels from a satellite receiver (connected to scart socket EURO AV2 ) are received on the DVD recorder

on programme number 'EXT2'.

found. This can take several minutes.

Searching for TV channels

02 Channels found

If necessary, use the [OUTPUT] button to switch to the internal tuner.

Please wait

Then select programme number 'EXT1’ with [0] on the remote control and programme number 'EXT2' with [PR–].

You should select the TV channels to be received by the satellite receiver directly on the receiver itself.

Autom. search

Autom.search complete

04 Channels found

…

1 3 After “Autom. search” is complete, set the Time, Year, Month and Date.

1 4 Confirm with [OK]. Then the set will reboot automatically.

◆ Time

†Year

Month

Date

10:00

2003

To continue

Press OK

1 6

1 7

In sta llin g y o u r DVD re co rd e r

Au to m a tic TV ch a n n e l se a rch (Au to in sta ll)

Ma n u a l TV ch a n n e l se a rch

During installation, all available TV channels are searched for and stored. If the channel assignments of your

cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving house, you

can start this procedure again. This will replace the stored TV channels with the new ones.

In some cases, not all of the available TV channels may have been found and stored during initial installation. In

this case, you will need to search for and store the missing or coded TV channels manually.

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Switch on the DVD recorder using [STANDBY].

Press [SYSTEM MENU] on the remote control. The menu bar appears.

Select '

' using […] or [†].

Select '

' using […] or [†].

Select 'Installation' using [œ] or [√] and confirm with [†].

Select 'Manual search' using […] or [†] and confirm with [√].

In 'channel/freq.', select the desired display using [√].

Select 'Installation' using [√] and confirm with [†].

Installation

…

Autom. search

Select 'Autom. search' using […] or [†] and confirm with [√].

◆√Autom. search

√

◆√Manual search

†

√

†

Manual search

Sort TV channels

Time/Date

Sort TV channels

Time/Date

'Autom. search' starts. Wait until all TV channels have been found. This

can take several minutes.

In 'Entry/search', enter the frequency or channel of the TV station using

the number buttons [0..9].

To exit press

SYSTEM MENU

To exit press

SYSTEM MENU

When Autoinstall is completed, 'Autoinstall complete' will appear on

the TV screen.

Installation

Manual search

…

Using [œ] or [√] in 'Program number ', select the programme number

you want to use for the TV channel, e.g. “01''.

Date and time have been set and saved.

◆

Channel/freq.

√

†

Entry/search

Programme number 01

TV channel name

1 0 Press [OK] to store the TV channel.

1 0 To end, press [SYSTEM MENU] .

Decoder

NICAM

Off

1 1 To search for other TV channels, begin again at step 8.

1 2 To end, press [SYSTEM MENU].

Fo llo w TV

Fine tuning

When the TV set supports Easylink then the DVD recorder tries to get the

channel informations which are stored in th TV set.

To exit press

SYSTEM MENU

1 8

1 9

In sta llin g y o u r DVD re co rd e r

So r tin g a n d cle a rin g TV ch a n n e ls m a n u a lly

Se ttin g th e tim e a n d d a te

If the display shows an incorrect time or '-:--', the time and date must be reset manually.

After you have performed the automatic channel search you may not agree with the sequence in which the

individual TV channels have been allocated to the programme positions (programme numbers). You can use this

function to rearrange the TV channels already stored or to delete TV channels you don't want or those with poor

reception.

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Installation

Autom. search

Manual search

Switch on the DVD recorder using [STANDBY].

Press [SYSTEM MENU] on the remote control. The menu bar appears.

…

Sort TV channels

Switch on the TV set. If required, select the programme number for the

DVD recorder.

◆√Time/Date

√

†

To exit press

SYSTEM MENU

Switch on the DVD recorder using [STANDBY].

Select '

' using […] or [†].

Press [SYSTEM MENU] on the remote control. The menu bar appears.

Select 'Installation' using [œ] or [√] and confirm with [†].

Installation

Time/Date

…

Select '

' using […] or [†].

Select 'Time/Date' using […] or [†] and confirm with [†].

◆

†

Time

Year

22:13

2004

√

Select 'Installation' using [œ] or [√] and confirm with [†].

Check if the time in 'Time' is correct. If required, change the time with

the number buttons [0..9] on your remote control.

Month

Date

Select 'Sort TV channels' using […] or [†] and confirm with [√].

To store

Press OK

Installation

Autom. search

Check 'Year', 'Month' and 'Date' in the same way. To move between the

fields, use […] or [†] .

Select the TV channel that you want to delete or whose order you want

to change using […] or [†].

…

Manual search

◆√Sort TV channels

Time/Date

√

†

Check the displayed settings and confirm with [OK].

Confirm with [√].

To exit press

SYSTEM MENU

1 0 To end, press [SYSTEM MENU].

Using […] or [†] , shift the TV channel to the desired position and press

the [œ] button. The DVD recorder will insert the TV channel.

Installation

Sort TV channels

…

…...

1 0 Repeat steps 6 to 8 until you have resorted/deleted all desired TV

◆√P01

√

†

P02

P03

P04

P05

P06

†...

channels.

1 1 To save, press [OK].

To sort

Press >

To exit press

1 2 To end, press [SYSTEM MENU].

SYSTEM MENU

De le tin g TV ch a n n e ls

Unwanted channels or those with poor reception can be deleted using [CLEAR]

button . After that you can continue at step 6 .

2 0

2 1

In fo rm a tio n o n th e TV scre e n

Ico n s in th e m e n u b a r

Sta tu s b o x

You can check and change many of the features and settings on your DVD recorder using the system menu. The

menu bar cannot be displayed during recording.

The status box displays the current operating mode (status) of the DVD recorder and the current disc type. This

display can be switched off.

Use the [SYSTEM MENU] button to call up and close the menu bar (main menu). You can select the appropriate

feature using […] and [†]. You confirm a feature using [√]. This takes you to a submenu or executes the

feature immediately. Depending on the current disc, some features may not be available.

Opera ting m ode icons

....... No disc

....... Play

Sound

Features

Installation

Record Settings

....... Closing tray

....... Disc in

....... Record

Picture

Language

....... Record pause

....... Search backwards (8x speed)

....... Backward Slow motion

....... Forward Slow motion

....... Stop

....... Search forwards (8x speed)

....... Loading

User preferences

Title/Track

....... Opening

---

Chapter/Index

Audio language

Subtitle language

Camera angle

Zoom

....... Opened

off

....... Pause play

Tu n e r in fo b o x

This box appears in the lower left-hand corner of the screen. The aerial signal, the TV channel and name of the

TV channel are shown.

Sound

Search by time

...... Current channel/selected input socket

....... No signal : TV channel is not available/additional device is not connected

or is switched off

....... Copy protected signal

Tim e r in fo rm a tio n b o x

This box appears above the tuner information box. When a timer recording is set, it shows the timer icon and the

start time or date of the first programme to be recorded. If no timer recording is scheduled, the current time is

displayed. This box disappears during playback of a disc or after a recording starts.

....... Current time : No timer event programmed

....... Timer starts on the day shown

....... OTR recording runs until the stop time displayed

2 2

2 3

Pla y b a ck

In se r tin g a d isc

Pla y in g a DVD vid e o d isc

Press the [OPEN/CLOSE] button on the front of the DVD recorder. The

disc tray opens.

A menu may appear during playback of a DVD. In case titles and

chapters are numbered, press a number button on the remote control.

You can also select a menu item using [œ √ … †] and confirm with

[OK].

Insert the disc carefully into the tray, with the label uppermost and

press [PLAY/PAUSE] or [OPEN/CLOSE] on the front. The information on

the disc is read.

If playback does not start automatically, press [PLAY/PAUSE]. The

display shows: title, chapter, time elapsed.

Playback begins automatically.

To stop the disc, press [STOP].

Pla y a b le d iscs

This DVD recorder will play the following systems:

To eject the disc, press [OPEN/CLOSE] on the front of the DVD recorder.

•

DVD video

•

(Super)Video-CD disc

DVD+R Disc

DVD-R

CD-RW

MP3-CD

DVD+RW disc

DVD-RW (video mode, finalised)

CD-R

Th e m e n u o n th e scre e n is sh o w in g a n 'X'

Some DVD discs can be manufactured so that certain steps are required before

the disc can be played, or so that only limited operation is possible during

playback. When an 'X' appears on the screen the selected feature is not

possible.

Audio CD

You can operate the DVD recorder using the remote control or the buttons on

the front of the DVD recorder.

Th e scre e n is sh o w in g re g io n a l co d e in fo rm a tio n

•

Since DVD films are not normally released in all parts of the world at the

same time, all DVD players have a specific regional code. Discs can be

given a regional code. If the regional codes differ between the player and

the disc, playback is not possible.

Ho w to in se rt a d o u b le sid e d DVD

Double-sided discs are not printed on either side. The labelling is in the centre

on each side of the disc. The labelling of the side you wish to play must be

uppermost.

•

The regional code is shown on the label on the back of the machine.

The regional code does not apply to recordable DVD discs.

O p e n in g / clo sin g th e tra y u sin g th e re m o te co n tro l

You can open and close the disc tray using the remote control. Press and hold

the [STOP] button on the remote control until the dialog box shows 'OPENING'

or 'CLOSING'.

Th e scre e n is p ro m p tin g m e to ch o o se a n o p tio n fro m th e m e n u .

•

Select the option you want using [œ √ … †] or the number keys [0..9].

In some cases you need to confirm with [OK].

You can also access the menu using [DISC MENU] on the remote control.

Ho w to a cce ss h id d e n in fo rm a tio n

Press the [DISC MENU] button on the remote control. A menu will appear

on the screen. For some feature films this may appear after an introductory

sequence.

Select the option you want using [œ √ … †] or the number keys [0..9].

Confirm with [OK].

2 4

2 5

Pla y b a ck

Pla y in g a DVD+RW / +R d isc

Pla y in g a n MP3 CD

MP3 (MPEG1 Audio Layer-3) files are highly compressed music files. Using this technology the data volume can

be compressed by a factor of 10. This means it is possible to record 10 hours of music in CD quality on a single

CD-ROM.

If the disc is write-protected or a finalised DVD+R disc, playback starts

automatically.

If playback does not start automatically, select the title you want to

watch from the Index Picture Screen using [†] or […]. You can also use

the [§] or [∞] buttons on the front of the set.

Insert an MP3 CD. Playback starts automatically. If the TV is on, the

MP3 CD screen appears automatically. During playback, the current

track number and its elapsed playing time will show on the TV screen

and on the recorder display. During interrupted playback (STOP), the

current track number will show on the TV screen and on the recorder

display. If available in the so-called ID tag, more information will be

displayed concerning album, track and artist.

Press [PLAY/PAUSE]. The display shows: title number.

To stop the disc, press [STOP].

To eject the disc, press [OPEN/CLOSE] on the front of the DVD recorder.

I se e th e m e ssa g e 'EMPTY' in th e d isp la y

There are no recordings on this disc.

Stop playback using [STOP]. The number of albums will be shown in the

display.

W h a t sh o u ld I n o te w h e n p la y in g b a ck d iffe re n t re co rd in g ty p e s (q u a litie s)

The correct recording quality 'HQ , SP (SP), SP+ (SP+), LP (LP), EP (EP), EP+ (EP+)'

will automatically be selected during playback.

For more information, please read section 'Selecting the recording type

(Quality)' in chapter 'Manual recording'.

Additiona l pla yba ck fea tures

Select the previous or next title with [§] or [∞].

You can also use [T/C] to select titles and albums. Press [T/C] and then

select symbol 'T' for album or 'C' for title with […] or [†]. Select the

number of the album/title with [œ], [√] or with the number buttons

[0..9] on the remote control.

Pla y in g a n a u d io CD

You can also use repeat functions (Button [PLAY MODE]).

Insert an audio CD. Playback starts automatically. If the TV is on, the

audio CD screen appears automatically. During play, the current track

number and its elapsed playing time will show on the TV screen and on

the recorder display.

W h e n cre a tin g MP3 CDs p le a se n o te th e fo llo w in g :

Supported file system: ISO9660, Joliet

Supported formats: *.mp3

File names: maximum 64 ASCII characters (Joliet)

Maximum of 99 albums, 999 tracks

Supported sampling frequencies: 44.1kHz, 48kHz. Files with less than 44.1kHz

will be skipped.

Stop playback using [STOP]. The number of tracks and the total time are

displayed.

Supported bit rate: 96, 128, 192, 256 (kbps)

ID3 Tag: Version 1, 1.1. If the version is higher, the directory name is used for

the album and the filename for the track.

An MP3 CD may not be played if the making method is different from the

above.

Im p o rta n t n o te s fo r p la y b a ck :

In agreement with SDMI the digital audio output will not work during MP3

playback.

Only the first session of a multi-session CD will play back.

2 6

2 7

Pla y b a ck

Ad d itio n a l p la y b a ck fe a tu re s

Pla y in g a (Su p e r) Vid e o CD

Ch a n g in g to a n o th e r title / ch a p te r

(Super) Video CDs may be equipped with PBC (Play Back Control). This means that special playback functions

(menus) can be directly selected. The Video CD must be PBC-compatible (see CD packaging). 'PBC' is turned on

by default.

If there is more than one title or chapter on the disc, follow the instructions to change to another title or

chapter. If there are several chapters within the title, these will be shown. It is possible to select these titles

using the menu bar.

Insert a (Super) Video CD and press [PLAY/PAUSE].

During playback use the [∞] button to move to the next title/chapter.

If the '◆' symbol appears in the display, start playback by pressing

[PLAY/PAUSE].

Pressing [§] takes you to the start of the current title or chapter.

Pressing [§] twice takes you to the start of the previous title or

chapter.

If a menu appears on the screen, use the remote control buttons

indicated on the screen to select the menu option you want ([§], [∞] )

or with the number buttons [0..9]. If the PBC menu contains a title list,

the desired title can be chosen directly.

Using [T/ C] button

Press [T/C] (title/chapter) and select the appropriate title using [œ] or

[√]. Ensure that the 'T'(Title) icon is selected in the menu bar.

The [RETURN] button will take you back to the previous menu.

Stop playback using [STOP].

Using [T/C] you can select chapters within the title. Press [T/C] and

select the 'C' (Chapter) icon using [†]. Select the appropriate chapter

using [œ] or [√].

Im p o rta n t n o te s fo r p la y b a ck :

VCD1.0 and VCD1.1 is not supported.

VCD2.0 playback is supported.

Se a rch in g a d isc

You can search the disc for a recording at 4x or 32x playback speed.

During playback, press and hold [§] (reverse) or [∞] (forwards) to

switch to the search feature. You can switch between the playback

speeds using [§] / [∞] .

To continue playback, press [PLAY/PAUSE] twice at your chosen

location.

N o so u n d

The sound is switched off in search mode. This is not a fault in your machine.

Still p ictu re

During playback, press [PLAY/PAUSE] to stop the disc and display a still

picture.

Slo w m o tio n

During playback, press [œ◆] or [◆√] on the remote control to switch to

slow motion.

You can choose between the various speeds using [œ◆] or [◆√] .

To continue playback, press [PLAY/PAUSE] twice.

2 8

2 9

Ad d itio n a l p la y b a ck fe a tu re s

Se a rch b y tim e

Sca n fe a tu re

Using this feature you can select where playback should start (select elapsed time).

This feature plays back the first 10 seconds of each chapter (DVD) or track (CD).

scan

During playback press [SYSTEM MENU] on the remote control. The

menu bar will appear at the top of the screen.

During playback, press [PLAY MODE]. Select '

MODE].

' using [PLAY

Select the '

' symbol using […] or [†] and confirm with [√].

After 10 seconds the DVD recorder switches to the next chapter/index.

To start playback at the corresponding chapter/index, press [STOP] and

then [PLAY/PAUSE].

Playback is stopped and a box appears on the screen showing the

elapsed time.

Enter the start time with the digit keys [0..9] from where playback

should start.

Zo o m fe a tu re

The Zoom feature allows you to enlarge the video image and pan through the enlarged image.

Confirm with [OK].

Playback starts immediately before the time entered.

Press [

] and select the required zoom factor using [œ] or [√].

Th e tim e e n te re d w ill fla sh

If the selected title is shorter than the time entered, enter a new time or end

the function using [SYSTEM MENU].

When 'OK to pan' appears on the screen, the zoom process is complete.

Press [OK]. Using [œ √ … †], select the part of the image you wish to

view.

Confirm with [OK].

To stop the feature, press [PLAY/PAUSE] and then [SYSTEM MENU].

Re p e a t/ Sh u ffle p la y

You can mark entire sections or the whole disc for endless playback. Depending on the type of disc (DVD video,

DVD+RW, video CD) you can select a chapter, title or the entire disc.

Select the desired chapter, title or the entire disc and start playback.

During playback, press [PLAY MODE]. By pressing [PLAY MODE] again

you can chose from the following options:

Ca m e ra a n g le

chapter

: repeat chapter – DVD only

If a DVD video contains sequences recorded from different camera angles you can change the camera angle for

playback.

title

: repeat title/track

During playback, press [

repeat

: repeat entire disc (Video CD, Audio CD only)

Select the required camera angle using […] or [†]. You can also enter

the number directly using the number buttons [0..9].

shuffle

: Shuffle play

display disappears: no repeat

After a short delay, playback changes to the new camera angle. The

' icon remains displayed until multiple angles are no longer

To switch off the repeat, press [STOP]. You can also press [PLAY MODE]

repeatedly until the icons disappear.

available.

Th e

' ico n is n o t visib le

The selected scene was not recorded from different camera angles. That is why

you cannot select this feature. For more information please read the ‘cover text’

on your DVD video disc.

3 0

3 1

Ad d itio n a l p la y b a ck fe a tu re s

Ma n u a l re co rd in g

Ch a n g in g th e a u d io la n g u a g e

Ge n e ra l in fo rm a tio n

Pre-recorded DVD videos often come with multiple audio languages. Playback uses the language you selected

during initial installation. You can change the audio language of the current disc at any time.

Use the 'Manual recording' feature to spontaneously start recording (e.g. to record a TV show already in

progress).

You can change the audio language either using the menu of inserted disc ([DISC MENU] button) or pressing

[AUDIO] button on the remote control. The audio language for DVD playback between the two methods may be

different.

In the 'Index Picture screen' select the title to be overwritten or 'Empty title' using […] and [†].

If you want to record between existing recordings, check the length of the old recording and the length of the

new recording. If the new recording is too long, the following recording (title/chapter) will be overwritten.

During playback press [AUDIO].

◆ If you want to start and stop a recording manually, read 'Recording without automatic switch off'.

◆ If you want to start a recording manually but stop it automatically, read 'Recording with automatic switch

Select the required audio language using [œ] or [√]. You can also enter

the number directly using the number buttons [0..9].

off'. (e.g. not to record to the end of the disc)

◆ Read 'Automatic recording from a satellite receiver', if you want a recording to be controlled automatically

Play continues in the new audio language.

by a satellite receiver.

Ava ila b le d iscs fo r re co rd in g

With this DVD recorder, you can record on two types of DVD:

DVD+RW : This disc can be written to and then the contents deleted.

DVD+R : This type of disc can only be recorded once.

If you want to play this DVD in a DVD player it must be finalized using the ‘disc’

function. It is not possible to make further recordings using this disc. If this disc

is to be played in a DVD recorder it must not be finalised. Recordings can be

added and deleted. The disc space (playback time) from the deleted recording

cannot be recovered for further recordings.

Su b title s

Pre-recorded DVD videos often come with subtitles in several languages. Playback uses the language you

selected during initial installation. You can change the subtitle language of the current disc at any time.

You can change the subtitle language either using the menu of the inserted disc ([DISC MENU] button) or

pressing [SUBTITLE] button on the remote control. The subtitle language for DVD playback between the two

methods may be different.

W a rn in g fo r Sa fty Re co rd

If you want to add a title by recording you should select free title in the 'Index

Picture screen' . Otherwise the title selected is overwritten with no warnings.

During playback press [SUBTITLE].

Select the required subtitle language using [œ] or [√]. You can also

enter the number directly using the number buttons [0..9]. You can

switch off subtitles again with [0] or by pressing 'Off'.

3 2

3 3

Ma n u a l re co rd in g

Re co rd in g w ith o u t a u to m a tic sw itch o ff

In se rtin g ch a p te r m a rk e rs

During recording it is possible to mark scenes that you want to see or hide

later.

During recording, press [EDIT] at the relevant location. The screen displays

'Inserting marker'. The 'CHAPTER' number is increased by one in the display

box. For more information on titles and chapters please see the section

'Changing to another title/chapter' in the chapter 'Playback'.

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Insert a disc to be used for the recording. The system and content of the

disc will be checked. 'READING' will appear on the display.

If necessary, switch to the internal tuner on the DVD recorder using the

[OUTPUT] button on the remote control.

Th e d isp la y w ill re a d ‘ERRO R’.

The recording could not be completed correctly because of a disc error. Check

and, if necessary, clean the inserted disc.

Select the programme number (station name) you wish to record using

[PR +] or [PR –].

Ma k in g re co rd in g s o n DVD+R d iscs co m p a tib le

To start recording, press [REC/OTR] on the remote control or [RECORD]

on the DVD recorder.

If you want to play back the recording on a DVD player, you need to finalise the

disc in the DVD recorder. You can prepare your DVD for use in a DVD player

using the 'Finalising' feature. See the section 'Finalising DVD+R discs' in

chapter 'Managing the disc contents'.

For DVD+R discs each new recording is always added at the end of all

previous recordings as existing recordings cannot be overwritten.

You can stop recording by pressing [STOP]. ‘UPDATE' will appear on the

display. The DVD player is preparing the list of contents. Wait until this

message disappears from the display, then the recording is completed.

In te rru p t re co rd in g (Pa u se )

In d e x d isp la y

During recording, press [PLAY/PAUSE], for example to avoid recording

the commercials.

A DVD+RW disc was inserted that already contains recordings. Use […] and

[†] to select a location where the recording should be started.

‘EMPTY’ a p p e a rs in th e d isp la y

The inserted DVD disc is empty.

To continue recording, press [PLAY/PAUSE] again or [REC/OTR].

En d re co rd in g

A d ia lo g b o x a p p e a rs a sk in g if th e co n te n ts sh o u ld b e e ra se d o r th e d isc

sh o u ld b e e je cte d

The inserted disc is a DVD+RW disc whose contents are not compatible with

DVD Video (e.g. a data disc). This disc cannot be used for recordings until the

entire disc is erased using the [REC/OTR] button.

To end the recording, press the [STOP] button. Wait until 'UPDATE’ disappears

from the display.

'To o m a n y title s' a p p e a rs o n th e scre e n w h e n

re co rd in g is a tte m p te d .

A disc can only contain a max. of 48 titles (including the empty titles). Erase the

titles or change the disc.

Re co rd in g w ith a u to m a tic sw itch o ff (O TR O n e To u ch Re co rd in g )

Sta tio n n a m e

Insert a disc.

If a TV station transmits a station name it will be shown in the display.

Programme number of the external inputs:

Use [PR +] or [PR –] to select the programme number (channel name) you

want to record.

EXT1

EXT2

CAM1

CAM2

Scart socket at the back ‘EURO AV1’

Scart socket at the back ‘EURO AV2’

SVHS-/Audio front sockets ‘S-VIDEO / left AUDIO right’

Video/audio front sockets ‘A/V VIDEO / left AUDIO right’

Digital Video (i Link) front socket DV

Press [REC/OTR] on the remote control.

Each time you press [REC/OTR] you will add 30 minutes to the recording

time.

DQ R-1 1 0 0 D O n ly

Ho w ca n I ca n ce l th e re co rd in g tim e I h a ve ju st se t?

To cancel the entry, press the [CLEAR] button while the recording time is

displayed.

3 4

3 5

Ma n u a l re co rd in g

Pro te ctin g th e d isc a g a in st a ccid e n ta l re co rd in g

Lin in g u p re co rd in g s w ith in a title (a sse m b le cu t)

To prevent an important recording from being accidentally erased, you can protect the entire disc. You can only

protect the disc as a whole. It is not possible to protect an individual recording.

You can add further recordings to a title already contained on a DVD+RW disc. This recording will be added to

the title as a so-called 'chapter'. Existing information will be overwritten from this location onward. Depending

on the length of the recording, this will also overwrite titles that follow the current title. The recording mode

(quality) is automatically transferred from the current title.

Insert the disc you wish to protect.

To play back this recording, press [SYSTEM MENU] and select 'C' (chapter) using [√]. You can also use [T/C].

Press [DISC MENU]. The Index Picture Screen appears.

For more information, read section 'Changing to a different title/chapter' in chapter 'Playback'.

While the Index Picture Screen is displayed, press the [STOP] button on

the remote control. The first title is marked.

Find the title in the Index Picture Screen where you want to insert the

new recording.

Press […]. This takes you to the disc info screen.

Press the [√] button. Select 'Protection'. Confirm with [√].

Select 'Protected' using [†] and confirm with [OK].

Quit using [œ] and then [DISC MENU].

Look at the last minute of the old recording (playback).

Setting for DAEWOO DVD+RW

Press [PLAY/PAUSE] on the remote control at the position where the

new recording is to go.

DIsc name

Protection

Erase disc

DAEWOO DVDRW

œUnprotected

Protected

To monitor the recording you can switch to the internal tuner using

[OUTPUT].

The entire disc is now protected. If you try to record onto this disc the

message 'LOCK' will appear in the display and 'Disc locked' on the

screen.

Now start recording as usual by pressing [REC/OTR] on the remote

control. The new recording will be inserted.

W h a t h a p p e n s w ith DVD+R d iscs?

As long as these discs are not finalised, they can be protected against

accidental erasure in the same way as DVD+RW discs.

Stop recording with [STOP].

W h a t h a p p e n s w ith DVD+R d iscs?

New recordings on 'DVD+R' discs can only be added after existing recordings. It

is not possible to overwrite existing recordings on 'DVD+R' discs.

3 6

3 7

Ma n u a l re co rd in g

Se le ctin g th e re co rd in g m o d e (q u a lity )

Au to m a tic re co rd in g fro m a sa te llite re ce ive r (Sa t Re co rd in g )

By selecting a recording mode, you define the picture quality of recordings and the maximum recording time for

a disc. You can check the quality by switching to a recording mode and then watch the picture via the built-in

tuner ([OUTPUT] button).

You can use this feature if you own a satellite receiver that can control other devices via a scart cable and a

programming feature (Timer). For more information, please see the operating instructions for the satellite

receiver.

For playback, the correct picture quality will automatically be selected.

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Record settings

…

◆

†

Record mode

Sat record

Auto chapters

Filter mode

Switch on the TV set. If required, select the programme number for the

DVD recorder.

EXT2

√

Press [SYSTEM MENU] on the remote control. The menu bar appears.

Stndrd

Select '

' using […] or [†].

On the front of the DVD recorder select the recording quality using [REC

MODE]. You can also use the button [REC MODE] on the remote control.

To store

Press OK

Select line 'Record settings' using [œ] or [√] and confirm with [†].

Select 'Sat record' using […] or [†] .

Select 'Ext2' with [œ] or [√].

W h ich re co rd in g ty p e s ca n I ch o o se ?

HQ : High Quality offers the best picture quality and a recording time of 60

minutes.

SP : Standard Play (pre-recorded DVD quality) offers excellent picture quality

with a recording time of 120 minutes.

SP+ : Standard Play (better than S-VHS quality) offers excellent picture quality

with a recording time of 150 minutes.

LP : Long Play (S-VHS quality). Recording time 180 minutes.

EP : Extended Play (better than VHS quality). Recording time 240 minutes.

EP+ : Extended Play (VHS picture quality). Recording time 360 minutes.

Confirm with [OK].

Use a scart cable to connect the scart socket EURO AV2 on the DVD

recorder to the corresponding scart socket on the satellite receiver.

Quit using [SYSTEM MENU].

1 0 Insert a disc that you want to use for recording.

Ca n I se le ct th e re co rd in g ty p e via

m e n u a s w e ll?

Press the [SYSTEM MENU] button.

Select the ' ' icon using [… ] or [†].

Select 'Record settings’ using [… ] or [†] and confirm with [√].

In the line 'Record mode' select the recording type with [… ] or [ †].

Confirm using [OK] and [SYSTEM MENU].

If you have selected the recording type ' LP', ' EP' or' EP+', you can select

the settings 'Stndrd' (Standard) or 'Sport’ (fast movements) in the 'Filter

mode' line.

1 1 Programme the satellite receiver with the required information

(programme number of the TV channel, start time, end time). If

necessary, please see the operating instructions for your satellite

receiver.

1 2 Switch off the DVD recorder with [STANDBY].

The DVD recorder is now ready to record. The beginning and end of the

recording is controlled via the scart socket EURO AV2.

Tim e d iffe re n ce

The remainig time in the disc may differ from the actually recorded time.

Sw itch in g o ff 'Sa t Re co rd in g '

To switch off the feature, select 'Off’ using [œ ] or [√].

3 8

3 9

Ma n a g in g th e d isc co n te n ts

Ge n e ra l In fo rm a tio n

Ed itin g re co rd in g title s (n a m e )

When a recording is made to disc, the following additional information is also stored at the beginning of the

recording:

Some TV stations transmit the title (name) of a programme. In this case, the name will be included

automatically (e.g. 'ROCKY'). Otherwise, the channel number and time of the recording are stored as the name.

The name of the recording can only be changed after the recording has been completed.

•

Name of the recording

If the TV station does not transmit a name, only the channel number and time will be stored as the name

Press the [STOP] button or during playback press [DISC MENU].

•

Length of the recording

Record type (Quality)

Using […] or [†] select the title whose name you want to edit and

confirm with [√]. The menu for editing names appears.

Setting for title P01 08:48

…

Name

œP01ab*CW46 √

Date of the recording

†

Play full title

Select 'Name' using […] or [†] and confirm with [√].

Index picture of the recording

Erase this title

Using [œ] or [√] select the position where the letter/number/icon is to

be changed/re-entered.

A marker will be set every 5-6 minutes if the 'Auto chapters' function is activated in the 'Record settings' menu.

This marker is known as a 'chapter'. These markers can be changed when the recording has finished.

It is also possible to add 'chapters' later. This means that scenes you do not want to see during playback, such

as commercials, can be hidden or skipped. During playback you can watch your recording as a continuous

sequence without the hidden chapters.

Change the icon using […] or [†]. You can switch between upper and

lowercase using [SELECT]. You can delete the character using [CLEAR].

Repeat 4 and 5 until you have made the changes you want.

◆ Read section 'Disc settings', to change general settings of the disc.

◆ Read 'Editing recording titles (name)' to find out how to change a name.

Save the new name with [OK].' Storing name' appears on the TV screen

for confirmation.

◆ Read 'Playing back titles' to find out how to play back the entire recording including the hidden chapters

◆ Read 'Erasing a recording/title' to find how to erase titles and the accompanying recording.

◆ Read 'Edit Menu' to find out how to split the title into chapters and how to manage the chapters.

To end, press [œ].

Ca n m a rk e rs b e se t o n

DVD+R d isc?

Markers can be set on these discs if they have not been finalised.

Pla y in g b a ck title s

If you have hidden certain chapters of a title, with this setting you can view the entire title including the hidden

chapters. Proceed as follows:

Press the [STOP] button or during playback press [DISC MENU].

Setting for title P01 08:48

Using […] or [†] select the title that you want to play back and confirm

with [√]. The menu for editing titles appears.

Name

P01ab*CW46

Press OK

Play full title

Erase this title

Select 'Play full title' using […] or [†] and confirm with [√].

Playback begins automatically. The full title - including the hidden

chapters - is played back.

4 0

4 1

Ma n a g in g th e d isc co n te n ts

Era sin g a re co rd in g / title

Disc se ttin g s

You can erase individual recordings from a disc. Follow the instructions below:

This screen appears before the first title and contains general information about the current disc.

You can: • change the name of the disc

• activate or deactivate write protection on the disc

• Finish editing (make edits DVD compatible)

• Finalising DVD+Rs

Press the [STOP] button or during playback press [DISC MENU].

Setting for title P01 08:48

Using […] or [†] select the title to be erased and confirm with [√]. The

menu for editing titles appears.

Name

P01ab*CW46

Play full title

Erase this title Press OK

Using […] or [†] select 'Erase this title' and confirm with [OK]. The

screen will show 'This will completely erase this title'. 'Press OK to

confirm'.

• Erasing DVD+RWs

Follow the instructions to get to this screen:

Press the [STOP] button or during playback press [DISC MENU].

Select the first title using […] or press [STOP].

If you want to erase the title press [OK]. To end, press [œ].

The screen will show 'Erasing title'.

Press the […] button. The Disc Info screen will appear.

'Empty title' will now appear in this position in the Index Picture Screen.

A new recording can now be made at this position. If the deleted title

was very short (shorter than 1 minute), no 'Empty title' will be displayed.

Cha nging the disc na m e

In the Disc Info screen press [√]. The 'Settings for' menu appears on

the TV screen.

Setting for DAEWOO DVD+RW

Ca n title s b e d e le te d fro m

DVD+R d isc?

…

Disc name

œDAEWOO DVDRW √

Titles on DVD+R discs are only marked as deleted. 'Deleted title' will appear in

the display instead of 'Empty title'. During playback the 'deleted' title is

skipped. The space used for this title cannot be used again as the title has not

been physically deleted. Once the disc has been finalised no further changes

can be made.

†

Select 'Disc name' using […] or [†] and confirm with [√].

Protection

Erase disc

Using [œ] or [√] select the position where the letter/number/icon is to

be changed/re-entered.

Change the icon using […] or [†]. You can switch between upper and

lowercase using [SELECT]. You can delete the character using [CLEAR].

Repeat 3 and 4 until you have made the changes you want.

Save the new title with [OK]. 'Storing name' appears on the TV screen

for confirmation.

To end, press [œ].

Fina lising a disc

Even if one or more titles have been edited, a DVD player may still show the

original title. You can prepare your disc so that a DVD player will be able to

read the edited title.

In the Disc Info screen press [√]. The 'Settings for' menu appears on

the TV screen.

Select 'Make edits compatible' using […] or [†] and confirm with [√].

The screen displays 'This will take ...' to show how long the process will

last.

To confirm press [OK]. The screen will show ‘Working...'. A bar will

move from left to right indicating the progress of the conversion.

‘Ma k e e d its co m p a tib le ' d o e s n o t a p p e a r

Your disc is already compatible. No conversion is necessary. To end, press

[SYSTEM MENU].

4 2

4 3

Ma n a g in g th e d isc co n te n ts

Ed it Me n u

In this menu, you can adjust a title to your personal preferences. You can insert/delete chapter markers, hide

chapters, select a new index screen, or split the title. Display this menu during playback using [EDIT] on the

remote control.

Fina lising DVD+R discs

This feature is required to play back a DVD+R disc in a DVD player. Once the

disc has been finalised no further recordings or changes can be made.

Inserting cha pter m a rk ers

During playback you can set and erase chapter markers within a title.

In the Disc Info screen press [√]. The 'Settings for' menu appears on

the TV screen.

Setting for DAEWOO DVD+RW

DIsc name

Protection

Erase disc

Finalise disc

DAEWOO DVDRW

Protected

The maximum number of chapters per disc is 124 and 99 per title. If one of

these numbers are reached, the following message appears: 'Too many

chapters'. Some markers must be erased before new markers can be added.

Select 'Finalise disc' using […] or [†] and confirm with [√].

Press OK

The screen displays 'This will take ...' to show how long the process will

last.

During playback press [EDIT] on the remote control at the appropriate

position. The 'Edit Menu' menu will appear on the screen.

To confirm press [OK]. The screen will show ‘Working...'. A bar will

move from left to right indicating the progress of the conversion.

Insert chapter

Press OK

Current chapter

Visible

Confirm 'Insert chapter' using [OK]. The screen displays 'Inserting

chapter marker'.

Delete chapter marker

'Fin a lise d isc' d o e s n o t a p p e a r

Either there is no DVD+R disc inserted or the disc is already finalised. To end,

press [SYSTEM MENU].

Press EDIT to exit

To exit the feature, press [EDIT].

'Se ttin g s fo r' d o e s n o t a p p e a r

'X' w ill a p p e a r o n th e scre e n :

If the disc has been recorded on another DVD recorder, the menu may not

appear. In this case, use the 'Finalise disc' feature in the '

'Features’.

' menu, under

This DVD is write-protected or the disc is a finalised DVD-R. Subsequent

changes cannot be made.

Hiding cha pters

Era sing DVD+RW discs

By default all chapters are visible. Chapters (such as commercials) can be

hidden during playback or made visible again. In editing mode, hidden

chapters are shown greyed out.

In the Disc Info screen press [√]. The 'Settings for' menu appears on

the TV screen.

Setting for DAEWOO DVD+RW

DIsc name

Protection

Erase disc

DAEWOO DVDRW

Protected

Press OK

Select 'Erase disc' using […] or [†] and confirm with [√]. The screen

will show 'This will erase all titles. Press OK to confirm'.

During playback press [EDIT] on the remote control at the appropriate

position. The 'Edit Menu' menu will appear on the screen.

If you want to erase all titles press [OK]. Otherwise press [œ] to end.

Confirm 'Current chapter' using [†].

The screen will show 'Erasing disc'.

Using [√] select 'Hidden'. The picture is shown darker.

To end, press [EDIT].

Insert chapter

Press OK

√ Hidden

Current chapter

Delete chapter marker

Once the disc has been successfully erased the Index Picture Screen

will show the empty area of the disc.

During playback this chapter will be skipped.

If the chapter is not visible, select 'Visible' in step 3 with [√].

Ho w d o I se le ct o th e r ch a p te rs?

Press EDIT to exit

Press [T/C ] on the remote control. The title and chapters are shown at the

top of the screen.

Using […] or [†] select Title (T) or Chapter (C).

Using [œ] or [√] select the title or chapter you wish to edit.

Sw itch in g q u ick ly

You can switch between show chapters ('Visible’) and hide chapters ('Hidden’)

quickly and easily using [SELECT].

4 4

4 5

Ma n a g in g th e d isc co n te n ts

Pro g ra m m in g a re co rd in g (TIMER)

Ge n e ra l in fo rm a tio n

Use programmed recording (TIMER) to automatically start and stop a recording at a later date.

The DVD recorder will switch to the right program number and begin recording at the correct time.

With this DVD recorder, you can pre-program up to 6 recordings within a period of one month.

To make a programmed recording, your DVD recorder needs to know:

* the date you want to make the recording

Era sing cha pter m a rk ers

You can erase all or some of the markers within a title .

During playback of the appropriate chapter press [EDIT] on the remote

control. The 'Edit Menu' menu will appear on the screen.

Using [†] select 'Delete chapter marker' for this chapter or 'Delete all

markers' for all chapters within the selected title.

* the program number of the TV channel

* the start and stop time of the recording

Confirm with [OK].

* VPS or PDC on or off

* the recording mode ('HQ/SP/SP+/LP/EP/EP+').

To end, press [EDIT].

This information is saved in a TIMER block.

Ho w d o I se le ct o th e r ch a p te rs?

Press [T/C ] on the remote control. The title and chapters are shown at the

top of the screen.

W h a t is 'VPS/ PDC'?

'VPS' (Video Programming System)/ 'PDC'(Programme Delivery Control) are used

to control the start and duration of TV channel recordings. If a TV programme

starts earlier or ends later, the DVD recorder will still switch itself on and off at

the correct times.

Using […] or [†] select Title (T) or Chapter (C).

Using [œ] or [√] select the title or chapter you wish to edit.

W h a t d o I n e e d to k n o w a b o u t 'VPS/ PDC'?

You must enter the start time exactly to the minute .

If you want to programme a time that is different from the VPS or PDC time, you

must switch off VPS or PDC.

Only one TV programme on a TV channel can be controlled using 'VPS/PDC' at a

time. If you want to record two or more TV programmes on a TV channel using

'VPS/PDC', you will need to programme these as two separate recordings.

4 6

4 7

Pro g ra m m in g a re co rd in g (TIMER)

Pro g ra m m in g a re co rd in g (w ith th e Sh o w Vie w Sy ste m )

Pro g ra m m in g a re co rd in g (w ith o u t th e Sh o w Vie w Sy ste m )

Thanks to this programming system, you no longer need to tediously enter the date, programme number, start

and end time. All the information needed by the DVD recorder for programming is contained in the ShowView

programming number. This ShowView number is found in most TV listings.

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Press [TIMER] on the remote control. The programming method last

selected is marked.

Timer

Switch on the TV set. If required, select the programme number for the

DVD recorder.

…

ShowView system

◆√Timer programming

†

√

Select ‘Timer Programming' using […] or [†] and confirm with [√]. The

current information will appear on the screen.

Timer List

Press [TIMER] on the remote control. The programming method last

selected is marked.

Timer

…

To store

Select the input field with [œ] or [√].

◆√ShowView system

√

Press OK

†

Timer programming

Timer List

Select ‘ShowView system' using […] or [†] and confirm with [√].

Enter information with […] or [†] or with the number buttons [0..9].

Enter the entire ShowView number. This number is up to 9 digits long

and can be found next to the start time of the TV programme in your TV

listings magazine.

Timer

Timer Programming

To store

Press OK

If all the information is correct, press [OK]. The programming

information is stored in a TIMER block.

VPS

Rec

Date Prog. Start PDC End Mode

01 EXT1 22:26

00:26 SP

e.g.: 5-234-89 or 5 234 89

Enter 523489 for the ShowView number.

To end, press [TIMER].

Timer

ShowView system

Mo• Fr/Weekly

Press SELECT

To store

Press OK

Load a DVD (unprotected) ready for recording.

The current disc is checked.

ShowView number

- - - - - - - - -

If you make a mistake, you can clear it with [CLEAR].

Confirm with [OK].

Mo• Fr/Weekly

Press SELECT

To store

Press OK

Switch off with [STANDBY].

The decoded information appears after confirmation. You can go back at

any time to change the information. Select the appropriate input field

using [œ] or [√]. If required, change the information using […], [†] or

the number buttons [0..9].

The programmed recording will only function properly if the DVD

recorder has been switched off using the [STANDBY] button.

If any of the TIMER blocks are in use, ' ' will light up on the display.

If all the information is correct, press the [OK] button. The programming

information is stored in a TIMER block.

Se le ctin g d a ily / w e e k ly re co rd in g s

In 'Date' use [SELECT] to select from the following options:

'Mo-Fr' : Repeated daily recordings from Monday to Friday

'Mo' : Repeated weekly recordings (every week on the same day, e.g. Monday).

To end, press [TIMER].

Load a DVD (unprotected) ready for recording.

The current disc is checked.

Pro g ra m m e n u m b e rs o f sca rt so ck e ts 'EXT1 ’ a n d 'EXT2 '

You can also programme recordings from external sources via scart socket

EURO AV1 or EURO AV2.

1 0 Switch off with [STANDBY].

Sw itch in g o n 'VPS/ PDC' in th e 'Sta rt' in p u t fie ld

The programmed recording will only function properly if the DVD

recorder has been switched off using the [STANDBY] button.

Select the 'Start’ input field using [TIMER]. Using [SELECT] switch on 'VPS/PDC’

(lights up). If you press [SELECT] again, you will switch 'VPS/PDC' off

(disappears).

If any of the TIMER blocks are in use, ' ' will light up on the display.

Ch a n g in g th e re co rd in g q u a lity in th e 'En d ' in p u t fie ld

Select the 'End’ input field using [TIMER].

Using [SELECT] , select the recording mode, ‘HQ, SP , LP , EP , EP+'.

4 8

4 9

Pro g ra m m in g a re co rd in g (TIMER)

Use r p re fe re n ce s

In this section you will learn how to set your user preferences on the DVD recorder. The symbols have the

following meanings:

Ho w to ch e ck , ch a n g e o r d e le te a p ro g ra m m e d re co rd in g (TIMER)

Sound

Feature

Installation

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Picture

Language

Recording

Press [TIMER] on the remote control. The programming method last

selected is marked.

Timer

ShowView system

…

Timer programming

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Select ‘Timer List' using […] or [†] and confirm with [√]. The current

information will appear on the screen.

◆√Timer List

†

√

To store

Press OK

Press [SYSTEM MENU] on the remote control. The menu bar appears.

Select the programmed recording (TIMER) you want to check, change or

delete with […] or [†].

Select the '

' icon using […] or [†] and confirm with [√]

Press [√].

Timer

Select the appropriate feature using [œ] or [√] and confirm with [†].

Timer List

VPS

Rec

Select the input field with [œ] or [√].

Date Prog. Start PDC End Mode

01 EXT1 22:26

- - ----- --:--

Select the corresponding line using […] or [†] and confirm with [√].

00:26 SP

--:-- ---

If required, change the information with […], [†] or the number buttons

[0..9] .

Select the appropriate feature using […] or [†] or the setting using [œ]

Total record time :02:00

To change

Press >

To exit

Press TIMER

or [√].

Confirm with [OK].

Confirm the setting with [OK].

To end, press [TIMER].

Switch off with [STANDBY].

Quit the menu item using [œ].

De le te p ro g ra m m e d re co rd in g

Pictu re se ttin g s

Press the [CLEAR] button.

Confirm with [OK]. 'Cleared' will briefly appear on the TV screen.

'-- ---' appears rather than the displayed values.

To end, press [TIMER].

You can choose the following features in this menu:

TV sha pe

Picture

√4:3 letterbox

TV Shape

The picture signal from your DVD Recorder can be set to match your TV

screen:

Black level shift

Video shift

----

SCART video

RGB

4:3 letterbox : for a 'wide-screen' picture with black bars at the top and

bottom

4:3 panscan : for a full-height picture with the sides trimmed

N e x TVie w Lin k

16:9

: for a wide-screen TV set (screen edge ratio 16:9)

This DVD recorder is equipped with the 'NexTView Link' function. If your television is also equipped with this

feature, you can mark TV programmes on the television for programming.

Bla ck level shift

These TV programmes will automatically be transmitted to a TIMER block on the DVD recorder. If you clear this

marking on the television, the corresponding TIMER block on the DVD recorder will also be cleared.

Adapts the colour dynamics for NTSC playback

Video shift

For more information, read the instruction manual for your TV set.

Use this feature to adjust the position of the picture on your TV left or right

using [œ], [√] to suit your TV set.

SCART video

By default the recorder is set to 'RGB'. Select 'S-Video' if you want to

connect an S-VHS recorder.

5 0

5 1

Use r p re fe re n ce s

So u n d se ttin g s

La n g u a g e se ttin g s

Depending on which audio outputs are used, you can select the settings in

this menu.

You can choose the following settings in this menu:

Language

Playback audio √English

Audio La ngua ge

Sound

If you only use the analogue audio output ( AUDIO L/R ), select the settings

‘Off' in the 'Digital output' menu.

Digital output √All

Playback audio language

Subtitle

English

Analogue output

Night mode

Stereo

Off

English

----

Subtitle

Country

United Kingdom

Digita l output

Subtitle language

For devices connected to the DIGITAL AUDIO OUT socket, you can select

from the following settings.

All :

Dolby Digital and DTS signals are fed unaltered to the digital

output. MPEG-2 multi-channel signals are converted to PCM

(Pulse Code Modulation). For receivers/amplifiers with digital

multi channel sound decoders.

Screen menu language

Country

PCM only : Dolby Digital and MPEG-2 multi-channel signals are converted

to PCM (Pulse Code Modulation). For receivers/amplifiers

without digital multi channel sound decoders.

Ad d itio n a l se ttin g s

Off :

Digital output switched off. For devices with analogue audio

input.

You can select the following functions in this menu:

Access control

Features

Access control √Enter code..

Ana logue output

Please read the next chapter 'Access control'.

For devices connected to the analogue audio output (AUDIO L/R), you can

select from the following settings.

Status box

Auto resume

----

Sta tus box

Low power standby Off

Stereo :

For devices without Dolby Surround or Tru Surround. Use this

setting if the DVD recorder is only connected to a stereo TV set.

Along with the on screen menu, the OSD (On Screen Display) also displays

information on the current operating status (counter, playback, recording, TV

channel, etc.) on the TV screen. You can switch off the information about the

operating status so that the on screen display (OSD) is not recorded during

copying.

Surround : Dolby Digital and MPEG-2 multi-channel are mixed down to a

DOLBY surround-compatible two-channel output signal. For

devices with Dolby Surround Pro Logic decoder.

On: The OSD information appears in every selected mode for a few

seconds and disappears again.

Night m ode

Night mode optimises the sound for playback at low volume. You are

therefore less likely to disturb your neighbours. This only works for Dolby

Digital audio on DVD video discs.

Off : The OSD information is switched off. It is no longer displayed on the

screen.

Auto resum e

If playback of a pre-recorded DVD video disc or video CD is interrupted

(button [STOP] or [OPEN/CLOSE] ) when the disc is reloaded (disc is started)

playback starts at the precise location where it stopped. This applies not

only to the current disc but to the last 20 discs played.

This feature can be switched off if not required.

Low pow er sta ndby

To save power, you can switch off the clock display on the DVD recorder.

Programmed (TIMER) recordings will still take place.

On : If the DVD-Recorder is switched off (button [STANDBY]), the clock

display is also switched off.

Off : If the DVD-Recorder is switched off (button [STANDBY]), the clock

display is visible.

5 2

5 3

Use r p re fe re n ce s

Acce ss co n tro l

Pa re n ta l le ve l co n tro l (DVD vid e o o n ly )

Films on pre-recorded DVD discs may contain scenes not suitable for children. Therefore, some discs may

contain 'Parental Control' rating information that applies to the entire disc or to certain scenes on the disc.

PBC

This line appears only if a VCD is loaded. This function lets you activate or

deactivate the PBC menu (Playback Control) for video CDs. See 'Playing a

(Super) Video CD'.

The appropriate scenes have filter values that reach from 1-8. If such a scene is detected during playback, the

filter value set on the DVD recorder is compared to the scene. If the filter value is higher than the setting, an

alternative scene will be played (if available).

Activa ting/ dea ctiva ting pa renta l level control

Double-sided DVDs may have a different ID for each side. For these discs,

each side must be authorised. Multi-volume video CDs may have a different

ID for each volume. For these CDs, each volume must be authorised.

Re co rd se ttin g s

You can go directly to the “Record settings” menu.

Record settings

…

◆

†

Record mode

Sat record

Auto chapters

Filter mode

√

Switch on the TV set. If required, select the programme number for the

DVD recorder.

EXT2

Stndrd

To store

Switch on the DVD recorder using [STANDBY].

Press OK

Press [SYSTEM MENU] on the remote control. The menu bar appears.

Select the '

' icon using […] or [†].

Select ‘Features’ using [œ] or [√] and confirm with [†].

In sta lla tio n se ttin g s

Confirm 'Access control ' using [√].

You can go directly to the “Installation” menu.

Enter a 4-digit code of your choice. Enter the same code again as

confirmation.

Installation

…

◆√Autom. search

√

†

Manual search

Sort TV channels

Time/Date

Select ‘Parental Level’ using […] or [†] and confirm with [√]. A bar

appears to select the parental level.

To exit press

SYSTEM MENU

Select the appropriate rating using […] or [†] or the number buttons

[0..9].

1 0 Confirm with [OK].

1 1 Quit the feature using [œ] and [SYSTEM MENU].

W h a t d o th e ra tin g s m e a n ?

Rating 0 (displayed as '--') parental control not active.

Rating 1 (suitable for children)

Rating 8 (only suitable for adults)

W h a t h a p p e n s if a DVD sce n e co n ta in s a h ig h e r le ve l th a n th e ra tin g se t?

If the recorder does not find a suitable alternative, playback will stop and you

must enter the four-digit code.

Th e in itia l p a ssw o rd is “ 3 3 0 8 ” .

In case you forget newly input password, you can use “3308” as a password.

5 4

5 5

Acce ss co n tro l

Ch a n g in g th e PIN co d e

Cha nging the country

Switch on the TV set. If required, select the programme number for the

DVD recorder.

The set filter values depend on the respective country. It is therefore

necessary to enter the country to which these filter values apply.

Switch on the DVD recorder using [STANDBY].

Switch on the TV set. If required, select the programme number for the

DVD recorder.

Press [SYSTEM MENU] on the remote control. The menu bar appears.

Select the '

' icon using […] or [†].

Switch on the DVD recorder using [STANDBY].

Select ‘Features’ using [œ] or [√] and confirm with [†].

Press [SYSTEM MENU] on the remote control. The menu bar appears.

Confirm 'Access control ' using [√].

Select the '

' icon using […] or [†].

Enter a 4-digit code of your choice. Enter the same code again as

confirmation.

Select ‘Features’ using [œ] or [√] and confirm with [†].

Confirm 'Access control ' using [√].

Select ‘Change code’ using […] or [†] and confirm with [√].

Enter a 4-digit code of your choice. Enter the same code again as

confirmation.

Enter the new code using the number buttons [0..9]. Enter the same

code again as confirmation.

Select ‘Change country’ using […] or [†] and confirm with [√].

1 0 Quit the feature using [œ] and [SYSTEM MENU].

Select the corresponding country using […] or [†].

I h a ve fo rg o tte n m y co d e

1 0 Confirm with [OK].

Press [STOP] four times, then press [OK]. Access control is now switched off.

You can now enter a new code as described above.

1 1 Quit the feature using [œ] and [SYSTEM MENU].

5 6

5 7

Be fo re y o u ca ll a n e n g in e e r

If you have any problems using this DVD recorder, the reason may be one of the following. You can also call the

customer service centre in your country.

No playback on DVD recorder:

◆ There is no recording on the disc: Change disc.

◆ You inserted the wrong disc type: Your recorder can play back the

following disc types: DVD Video, (Super)Video CD, DVD+R(W),

Audio CD, MP3 CDs.

The telephone numbers can be found on the back of this instruction manual. Have the model number (MODEL

NO) and the production number (PROD.NO) of your recorder ready.

The serial number (PROD. NO.) is printed on the type plate at the back.

◆ You inserted the disc the wrong way: Insert the disc with the label

facing upwards.

◆ Disc is dirty: Clean the disc.

◆ Wrong region code: The region code of the DVD and the DVD

recorder must match.

◆ Parental control is on: Read chapter 'Access control'.

◆ You have selected the wrong programme number for the DVD

recorder on the TV: on the TV, select the correct programme number

for the DVD recorder.

◆ The cable connecting the TV set and the DVD recorder has come

loose: check the cable.

Your recorder does not

respond to any button being

pressed and the display shows

'ON TV':

◆ Recorder in initial installation mode: Switch on the TV, switch over

to the DVD recorder socket.

Now the menu for language selection should appear. Please read

paragraph 'Initial Installation' in the chapter 'Installing your DVD

Recorder'.

Your DVD recorder does not

respond to any button being

pressed:

◆ Check that the unit is properly connected to a mains voltage which

is working.

◆ A programmed recording (Timer) is currently being made: If desired,

cancel the programmed recording (Timer) with [STANDBY].

◆ There is a technical problem: disconnect from the mains power

supply for 30 seconds, then connect again. If this doesn't help, you

can reset your DVD recorder to the default factory settings.

I cannot playback (Super)

Video CDs.

◆ It is possible that this (Super) Video CD contains a menu and the

'PBC' is switched off. You can see this in status field 'PBC OFF '. To

activate this function, proceed as follows:

1Press [SYSTEM MENU] while the (Super) Video-CD is inserted.

2Select '

' using […] or [†].

Resetting the machine to the

default factory settings

◆ Important: All the information stored (TV channels, time and date,

TIMER) will be lost.

1Disconnect from the mains power supply.

3Select line 'Features' using [œ] or [√] and confirm with [†].

4Select 'On’ in line 'PBC' using […] or [†] .

5Confirm with [OK] and end with [SYSTEM MENU].

2Press and hold down the [STANDBY] button on the device and

reconnect to the mains power supply.

Poor playback on DVD

recorder (distorted picture/

distorted sound)

◆ Your TV set is not properly adjusted.

◆ Disc is dirty: Clean the disc.

◆ Sometimes the picture may be temporarily distorted. This is not a

defect of your DVD recorder.

3Release the [STANDBY] button when ‘ON TV' appears on the

display. All the information stored (TV channels, time and date,

TIMER) will be lost. Please read paragraph 'Initial Installation' in the

chapter 'Installing your DVD Recorder'.

No recording possible.

◆ The TV channel you want to record is not stored or you selected the

wrong programme number: Check TV channels stored.

Remote control does not work:

◆ Remote control not pointed toward the DVD recorder: Point the

remote control at the machine.

◆ Disc write-protected (recording protected): Remove write-protection

or change the disc. For more information, please see 'Preventing

accidental erasing of discs' in chapter 'Manual Recording'.

◆ An already finalised DVD+R has been inserted: Change disc.

◆ There is a technical problem: Take out the batteries, wait for 10

seconds and put them in again.

◆ Batteries are flat: Change the batteries.

Programmed recording does

not work:

◆ You have programmed the wrong time or date: Check time/date.

◆ You have not set the TIMER properly: Check the programmed

recordings (TIMER block).

◆ Locked disc inserted: Remove disc lock.

◆ An already finalised DVD+R has been inserted: Change disc.

◆ 'VPS/PDC' switched on but 'VPS/PDC time' wrong: 'Enter 'VPS/PDC

time exactly to the minute. Check the aerial.

5 8

5 9

Be fo re y o u ca ll a n e n g in e e r

The wrong TV channel was

decoded (entered) after you

programmed a recording using

ShowView System.

◆ 1Enter the ShowView programming number of the TV channel you

want.

2Confirm with [OK] .

3Check the programme number/channel name in the “Prog'' input

field.

4If this does not correspond to the TV channel you want, select the

input field and change the programme number/channel name.

5Confirm with [OK].

A DVD+RW disc cannot be

played on certain DVD players.

◆ If a recording is too short, it is possible that a DVD player cannot

detect it: Please observe the following 'Minimum recording times':

Recording mode : ‘HQ’ : 5 minutes, ‘SP’ : 10 minutes, ‘SP+’ : 13

minutes, ‘LP’ : 15 minutes, ‘EP’ : 20 minutes, ‘EP+’ : 30 minutes

◆ Some DVD players cannot play back DVD+RW recordings. You can

solve this problem by using a special function:

1Open the disc tray with [OPEN/CLOSE]. Insert the disc but do not

close the tray.

2Hold down the number button [2] on the remote control until the

tray closes. The disc is modified.

3If this fails to produce the desired result, repeat the procedure using

the number button [3] on the remote control.

4You can restore the disc to its original condition by pressing [1].

Warning!) There is a risk that you can no longer play the disc on

other DVD players after this procedure. Therefore, apply this

function with particular care.

There is picture or sound

interference on TV reception:

◆ Switch to recording mode 'HQ' with REC MODE during playback

from the internal TV tuner ( [OUTPUT] button). This will help achieve

the best possible picture quality. Before recording, select the

recording mode as described in chapter 'Manual Recording', section

'Selecting the recording mode (quality)'.

◆ Have your aerial checked.

Distorted sound coming from a

connected hi fi amplifier.

◆ The DVD recorder is connected to the 'Phono-input' of your

amplifier: This socket is provided only for record players without a

preamplifier. Select a different audio input.

Other disc errors.

◆ If it is impossible to play back a disc, you can try and repair it for

new recordings using the following function. This will only prepare

the disc for erasing. It will not be erased, however, until the

recording has been completed.

1 Clean the disc.

2 Open the disc tray with [OPEN/CLOSE]. Insert the disc but do not

close the tray.

The picture is distorted or

black and white during

playback.

◆ The TV system of the disc does not match that of your TV set

(PAL/NTSC).

◆ The recording can be made in colour only when the TV channels or

the connected additional device send a colour signal. Black-and-

white signals containing no colour information (colour subcarriers)

cannot be recorded.

3 Hold down [CLEAR] on the remote control until the tray closes. The

disc is prepared for erasing.

4 Start recording as with an empty disc.

No sound signal at the digital

output.

◆ Check whether the sound settings match the selected inputs and

connected additional devices.

◆ Check whether you have inserted an MP3 CD: In accordance with

SDMI (Secure Digital Music Initiative), the digital audio output is

turned off during MP3 playback. This is not a defect of your DVD

recorder.

6 0

6 1

Be fo re y o u ca ll a n e n g in e e r

Te ch n ica l d a ta

Voltage

AC 230V~ 50Hz

DVD recorder is not

responding.

◆ While a programmed recording is being made, you cannot operate

your recorder manually. If you want to cancel the programmed

recording, press [STANDBY].

Power consumption

22W

Power consumption (standby)

Measurements in cm (W/H/D)

Weight without packaging approx

Power outage/no power

less than 5W (clock display off)

43.5/8.8/32.6 (Disc tray closed), 46.1 (disc tray open)

4.0 kg

‘Switch off,timer recording'

flashes on the TV screen.

◆ The DVD recorder was switched on several minutes before the start

of a programmed recording. Switch off the DVD recorder with

[STANDBY]. A programmed recording (timer) will only function if the

DVD recorder is switched off (button [STANDBY] ).

Channel and timer information remain saved for up to 1 year, the

time is saved for up to 12 hours.

Error message : 'Insert

recordable disc'.

◆ Either no disc has been inserted or you cannot record to this disc.

Insert a disc that you can record onto. Switch off the DVD recorder

using [STANDBY].

Operating position

Ambient temperature

Humidity

maximum 10 degree inclination in all directions

15°C - 35°C

25% - 75%

The error message 'Disc

locked' appears briefly on the

screen.

◆ A write-protected disc has been inserted. Cancel the protection (see

'Preventing accidental erasing of discs' in 'Manual Recording') or

insert a different disc.

Error message: 'Memory full'.

◆ If this error message appears after pressing [TIMER], then all the

TIMER blocks are already programmed. No more recordings can be

programmed. Press the [√] button. If you want to clear or check a

programmed recording (TIMER block), select it with […] or [†].

The 'Data error' message

appears on the screen.

◆ The data for the recording could not be transferred. Please check

the date, start time and end time of the programmed recording.

'Collision' appears on the

screen.

◆ The information for two programmed recordings overlap.

◆ If you ignore this error message the TV programme with the earlier

start time will be recorded first. You will miss the start of the

second programme.

◆ Change the information for one of the recordings.

◆ Delete one of the recordings.

6 2

6 3

GE JP388 User Manual
Frigidaire FFEC3605LB User Manual
Creative Labs 3D BLASTER ANNIHILATOR 2 MX GB0050 User Manual
ConnectPRO SL2116A User Manual
Black Box Computer Hardware LPJ001A F User Manual
Belkin F5U249EA User Manual
Bakers Pride Oven COB GS User Manual
Avanti DW6W User Manual
AT T CL81100 User Manual
Acer Computer Monitor X163W User Manual