®
Displays
GDR 15L Series
15.1″ Flat-Panel TFT LCD Display
GDR 15L: 15.1″ Rugged Desktop LCD Monitor
GDR 15L-TR: GDR 15L with Resistive Touchscreen
USER’S MANUAL
VER. 1.1 • MAR 2005
No part of this manual may be reproduced without permission
®
CyberResearch , Inc.
25 Business Park Dr., Branford, CT 06405 USA
203-483-8815 (9am to 5pm EST) FAX: 203-483-9024
CyberResearch® Displays
GDR 15L Series
©Copyright 2005
All Rights Reserved.
March 29, 2005
The information in this document is subject to change without prior notice
in order to improve reliability, design, and function and does not represent
a commitment on the part of CyberResearch, Inc.
In no event will CyberResearch, Inc. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use of or inability
to use the product or documentation, even if advised of the possibility of
such damages.
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of CyberResearch, Inc.
Trademarks
“CyberResearch,” and “GDR 15L Series,” are trademarks of
CyberResearch, Inc. Other product names mentioned herein are used for
identification purposes only and may be trademarks and/or registered
trademarks of their respective companies.
• NOTICE •
CyberResearch, Inc. does not authorize any CyberResearch product for
use in life support systems, medical equipment, and/or medical devices
without the written approval of the President of CyberResearch, Inc. Life
support devices and systems are devices or systems which are intended
for surgical implantation into the body, or to support or sustain life and
whose failure to perform can be reasonably expected to result in injury.
Other medical equipment includes devices used for monitoring, data
acquisition, modification, or notification purposes in relation to life
support, life sustaining, or vital statistic recording. CyberResearch
products are not designed with the components required, are not subject
to the testing required, and are not submitted to the certification required
to ensure a level of reliability appropriate for the treatment and diagnosis of
humans.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
iii
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
Intentionally Blank
iv
GDR 15L Series
CyberResearch® Displays
GDR 15L Series
Table Of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . .2
3. Connecting to a Computer . . . . . . . . . . . . . .3
4. Image Control and Adjustment . . . . . . . . . .4
5. Specifications . . . . . . . . . . . . . . . . . . . . . . .6
6. Cleaning and Maintenance . . . . . . . . . . . . .9
7. Service and Support . . . . . . . . . . . . . . . . . .9
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
vi
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
vii
©Copyright 2005 CyberResearch, Inc.
CyberResearch® Displays
GDR 15L Series
1.
Introduction
Thank you for purchasing the GDR 15L rugged TFT display.
The GDR 15L range of products have been designed to provide the highest
possible image quality, in a rugged housing that has specifically been
manufactured to operate in environments that would normally be
considered too harsh for normal computer equipment .
What makes the GDR 15L different?
The GDR 15L is a high quality, Ultra-Bright TFT LCD display with a resolution
of 1024x768. Sleek yet solid, our GDR Series displays feature a two-piece
cast aluminum shell with low-profile rubber buttons, designed to withstand
the shock and vibration of industrial and vehicle use. The screen is crisp,
flicker-free, and brilliant
This well-thought out design is NEMA 12 dust and moisture resistant, with
elastomer-sealed OSD geometry controls on the front panel for convenient
screen image control. Locking power and signal connectors help prevent
accidental disconnection.
The GDR 15L has been rigorously tested to withstand severe shock and
continual vibration and features a panel protected by 3mm toughened
glass. Each display has a guaranteed 24-hour burn prior to shipping.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
1
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
2.
Unpacking
Along with the GDR 15L rugged TFT, each box should contain the following:
1. Universal AC/DC Power Supply
2. 2-meter VGA Connector Cable
3. 3-pin IEC Power Lead
4. 9-pin Serial Connector Cable
5. Touch Drivers CD-ROM (GDR 15L-TR touchscreen model)
6. User’s Manual
*
If any of these items are not included, please contact CyberResearch.
In the unlikely event of product failure, please retain the original packaging
so that the units may be safely returned to us for service.
Important Note: Do not use any other power supply, other than the one
shipped with the unit. This may cause irreparable damage to either the
panel or the electronics, and will in all cases invalidate the warranty.
.
It is recommended that the display be used only in conjunction with
the VGA cable supplied. Deterioration in picture quality may occur if
a poorly shielded cable, or a longer cable is used in its place.
2
©Copyright 2005 CyberResearch, Inc.
CyberResearch® Displays
GDR 15L Series
3.
Connection to the Computer
GDR 15L Model
Using the following simple instructions, the GDR 15L will be installed and
configured within about five minutes.
On the bottom of the GDR 15L, there are two ports—a 15-pin VGA port, and
a power jack. One end of the VGA cable will already be connected to the
VGA port when the unit is shipped.
3.1 Turn off the computer.
3.2 Attach the VGA cable to the video port on the PC and ensure that both
thumbscrew connections are securely fastened.
3.3 Insert the power jack on the power supply into the remaining circular
port on the monitor, and connect the power supply to an outlet using
the IEC power lead.
3.4 Turn on the computer.
3.5 Turn on the display.
3.6 The display has not yet been configured, so the picture quality may
not yet be optimized.
GDR 15L-TR Touchscreen Model
In addition to the above, the touchscreen model has an extra cable
terminating in a 9-pin serial connector which connects to one of the PC’s
serial ports.
Power, VGA, & Touchscreen connectors on bottom of unit.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
3
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
4.
Image Control and Adjustment
There are two important steps in order to ensure that the best possible
image quality is now obtained:
4.1 Select the correct resolution and refresh rate.
The GDR 15L is intended to run at a resolution of 1024x768 pixels.
Although the unit can display in full screen mode at both 800x600
and 640x480, we strongly recommend you now set the resolution
to 1024x768.
• Move the slider bar until the screen resolution is 1024x768.
• Change the refresh rate to 60Hz
• Set the number of colors to 16 million
• Save settings before exiting.
4.2 Run the On-Screen Auto Adjust Utility using the buttons on the front of
the monitor:
• Click the “Menu” Button once. The On-Screen Menu will now pop up and
will already be highlighting the “Auto Adjust” option.
• Click “Select.”
• The display will now resize and reposition until an optimal image is
achieved.
• Wait five seconds and the On-Screen Controls will disappear.
Important Note: The panel used in the GDR 15L can operate between
a range of 60 and 75Hz. The best frequency will depend on the driver card
in the PC. If at this stage there is any “noise” on the screen, we recommend
the following:
• Try increasing the refresh rate above 60Hz. Do not exceed 75Hz.
• Fine-tune the Brightness, Contrast and Sharpness functions using
the On-Screen Control.
4.3 The GDR 15L is an extremely bright display, operating at 400 nits (400
cd/m2). We strongly recommend that, unless the unit is used in very
bright lighting conditions, the brightness be reduced to around 60 to
70% using the On-Screen Control. This helps to eliminate any residual
screen noise, and also will greatly prolong the backlight life of the
panel.
4
©Copyright 2005 CyberResearch, Inc.
CyberResearch® Displays
GDR 15L Series
4.4 Changing the screen resolution:
The GDR 15L can operate in full screen at either SVGA (800x600) or VGA
(640x480) .The unit cannot operate at any resolution higher than
1024x768.
In order to step down resolution, simply select the “Display” icon in
the Control Panel, chose “Settings,” and move the slider bar to
the desired position.
Note: When changing resolutions it may be necessary to run the On-Screen
Auto Adjust utility in the new resolution in order to maximize image
quality.
Whenever the display is being used at 800x600 the image quality will never
be as crisp and clear as when it is operating at its preferred resolution of
1024x768. This is particularly noticeable when viewing text, especially
small fonts. This is a due to the monitor “doubling” some pixels in order
to fill the screen and is completely normal.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
5
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
Display
Display Type
LCD flat panel
Video Input Types
Screen Size (viewable area, diagonal)
Standard analog VGA (15-pin)
15.1"
06" to 15"
15" to 18"
Display Filter Screen Size
Display Brightness
Display Filter Brightness
Resolution, max.
250 nits (High-Bright)
High-bright (250 to 340 nits)
1024 x 768 pixels
Tempered glass
Anti-reflective coating
Screen Protection
Maximum Number of Colors
Maximum Color Depth in Bits
Contrast Ratio
16 million colors
24-bit color
300:1
° Horizontal
° Vertical
160°
110°
Viewing Angle
Rise
Response Rate
Decay
60ms
50ms
Chassis
Desktop / benchtop
Swivel-arm mount
Mounting Configuration
Weighted desktop stand
NEMA 12
Protection Rating
IP52 (most dust, falling water within 15 deg. of
vertical)
Display Filter Protection
Front Panel Material
Chassis Material
Water-Resistant (NEMA 4/12, IP65)
Die-cast metal
Die-cast metal
Custom Color Options
Custom color available (min. qty: 100)
Mounting
VESA Mounting Hole Pattern
75x75mm VESA mounting holes
See optional mounting stands, brackets, and
swivel arms below.
Stand Features
Touchscreen
Touchscreen Type
Resistive touchscreen
RS-232 serial
75%
5-wire
ELO
Touchscreen Interface
Light Transmittance of Touchscreen
Touchscreen Quantity of Wires
Touchscreen Manufacturer
Touchscreen Resolution
1024 x 1024 points
Indicators, Switches, & Controls
Brightness
Contrast
Sharpness
On Screen Display (OSD) Control Functions
Auto adjustment
Power On/Off Switch
Front Panel
1 on/off switch
Sealed OSD controls for menu navigation (4
rubber keys)
Controls
OSD Controls
Signal Connectors
Video Input Connectors
Touchscreen Connector
HD15 (standard VGA) connector
9-pin D-sub female
Cables
Video Cable Length (included)
Pointing Device Cable Length (included)
6 feet
6ft (1.83m)
A 6-foot male-male VGA cable is included with
all models. Touchscreen models include a 6-foot
DB-9 M-F touchscreen cable.
Cabling Details
6
GDR 15L Series
CyberResearch® Displays
GDR 15L Series
Power Supply
Power Supply Form Factor
Nominal Input Voltage(s)
Input Voltage Range(s)
Input Frequency
External (fully enclosed)
110/220VAC
100...240VAC
50/60Hz
Power Supply Input Connector
Output Voltage(s)
NEMA standard male PC cord socket
+12VDC
DC Input Power Info
DC Input Voltage(s)
+12VDC
Cooling
Cooling Summary
Convection (runs in silence)
Environmental Specifications
Operating Temperature
Storage Temperature
32°F....122°F (0°C....50°C)
-13°F....140°F (-25°C....60°C)
5%....95%
Relative Humidity, noncondensing
18g half-sine for 6ms, 500 bumps per axis in
each direction (total: 3000), operating.
5 to 150Hz, 1.0g peak-to-peak for 2 hours per
axis, operating.
Shock Resistance
Operating
Operating
Vibration
Resistance
Safety & Standards Compliance
Safety/Approvals
MTBF (average) -- Display Backlight
Meets EMC Directive 89/336/EEC
40000 hours
Dimensions
Width
Height
15.24" (387mm)
10.98" (279mm)
2.44" (62mm)
Depth (including handles)
Weight
Weight
9.9lbs (4.49kg )
Under 16 lbs.
Display Filter Weight
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
7
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
154.5mm
60mm
94.5mm
m m
1 6
3 0 9 m m
8
©Copyright 2005 CyberResearch, Inc.
CyberResearch® Displays
GDR 15L Series
6.
Cleaning & Maintenance
The viewing surface should be cleaned with a suitable general purpose
anti-static wipe. Never use industrial cleaners or solvents, as there are
special coatings on the viewing surface that could be damaged.
7.
Service and Support
If you are not completely satisfied with your GDR 15L, simply call our
toll-free hotline (1-800-341-2525) within 30 days of receiving the item.
A friendly customer service technician will arrange for a full refund,
replacement, exchange, or credit.
If you have any questions about your GDR 15L, call our toll-free number in
the USA (1-800-341-2525), call worldwide (203-483-8815), send a fax to
(203-483-9024), or email our applications engineers at techsupport@cyber-
research.com.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
9
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
10
©Copyright 2005 CyberResearch, Inc.
CyberResearch® Displays
GDR 15L Series
Product Service
Diagnosis and Debug
CyberResearch, Inc. maintains technical support lines staffed by experienced
Applications Engineers and Technicians. There is no charge to call and we will
return your call promptly if it is received while our lines are busy. Most problems
encountered with data acquisition products can be solved over the phone. Signal
connections and programming are the two most common sources of difficulty.
CyberResearch support personnel can help you solve these problems, especially
if you are prepared for the call.
To ensure your call’s overall success and expediency:
1)
2)
Have the phone close to the PC so you can conveniently and quickly take
action that the Applications Engineer might suggest.
Be prepared to open your PC, remove boards, report back-switch or
jumper settings, and possibly change settings before reinstalling the
modules.
3)
Have a volt meter handy to take measurements of the signals you are
trying to measure as well as the signals on the board, module, or power
supply.
4)
5)
Isolate problem areas that are not working as you expected.
Have the source code to the program you are having trouble with available
so that preceding and prerequisite modes can be referenced and
discussed.
6)
Have the manual at hand. Also have the product’s utility disks and any
other relevant disks nearby so programs and version numbers can be
checked.
Preparation will facilitate the diagnosis procedure, save you time, and avoid
repeated calls. Here are a few preliminary actions you can take before you call
which may solve some of the more common problems:
1)
2)
Check the PC-bus power and any power supply signals.
Check the voltage level of the signal between SIGNAL HIGH and SIGNAL
LOW, or SIGNAL+ and SIGNAL– . It CANNOT exceed the full scale range
of the board.
3)
Check the other boards in your PC or modules on the network for address
and interrupt conflicts.
4)
Refer to the example programs as a baseline for comparing code.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
11
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
Intentionally Blank
12
GDR 15L Series
CyberResearch® Displays
GDR 15L Series
Warranty Notice
CyberResearch, Inc. warrants that this equipment as furnished will be free from
defects in material and workmanship for a period of one year from the confirmed
date of purchase by the original buyer and that upon written notice of any such
defect, CyberResearch, Inc. will, at its option, repair or replace the defective item
under the terms of this warranty, subject to the provisions and specific exclusions
listed herein.
This warranty shall not apply to equipment that has been previously repaired or
altered outside our plant in any way which may, in the judgment of the manufacturer,
affect its reliability. Nor will it apply if the equipment has been used in a manner
exceeding or inconsistent with its specifications or if the serial number has been
removed.
CyberResearch, Inc. does not assume any liability for consequential damages as a
result from our products uses, and in any event our liability shall not exceed the
original selling price of the equipment.
The equipment warranty shall constitute the sole and exclusive remedy of any Buyer
of Seller equipment and the sole and exclusive liability of the Seller, its successors
or assigns, in connection with equipment purchased and in lieu of all other
warranties expressed implied or statutory, including, but not limited to, any implied
warranty of merchant ability or fitness and all other obligations or liabilities of seller,
its successors or assigns.
The equipment must be returned postage prepaid. Package it securely and insure it.
You will be charged for parts and labor if the warranty period has expired.
Returns and RMAs
If a CyberResearch product has been diagnosed as being non-functional, is visibly
damaged, or must be returned for any other reason, please call for an assigned
RMA number. The RMA number is a key piece of information that lets us track and
process returned merchandise with the fastest possible turnaround time.
PLEASE CALL FOR AN RMA NUMBER!
Packages returned without an RMA number will be refused!
In most cases, a returned package will be refused at the receiving dock if its
contents are not known. The RMA number allows us to reference the history of
returned products and determine if they are meeting your application’s requirements.
When you call customer service for your RMA number, you will be asked to provide
information about the product you are returning, your address, and a contact person
at your organization.
Please make sure that the RMA number is prominently
displayed on the outside of the box.
• Thank You •
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
13
P: (203) 483-8815; F: (203) 483-9024
GDR 15L Series
CyberResearch® Displays
Intentionally Blank
14
GDR 15L Series
CyberResearch, Inc.
25 Business Park Drive
Branford, CT 06405 USA
P: (203) 483-8815; F: (203) 483-9024
|