Casio DQ 970 User Manual

MA0506-EA  
Operation Guide DQ-970  
ILLUSTRATION  
GENERAL GUIDE  
1 SNOOZE/LIGHT button  
Press this button to illuminate the display for about five seconds.  
Pressing this button while the alarm is sounding stops the alarm.  
2 Alarm Mode selector  
SNZ: Snooze alarm on  
ON: Alarm on  
INVALID  
RESET  
OFF: Alarm off  
3 + / – buttons  
Use these buttons to change the alarm time or the setting that is flashing on the display.  
4 °C/°F button  
Press this button to toggle the temperature units between Celsius and Fahrenheit.  
5 SET button  
Use this button when setting the current time.  
6 RESET button  
Press this button to reset the clock after replacing its batteries.  
Buttons marked “INVALID” have no function.  
°C/°F  
SET  
INVALID  
RESET  
USING THE CLOCK  
1. Press the SET button (5) to cycle through the setting screens as shown below.  
Normal Timekeeping Screen  
°C/°F  
SET  
Year Setting Screen  
Month and Day  
Setting Screen  
Time Setting Screen  
12-hour/24-hour  
Timekeeping Screen  
2. While the screen you want is displayed, use the + and buttons (3) to change the flashing digits.  
Holding down + or changes the flashing digits at high speed.  
You can set the year in the range of 2000 to 2039. The day of  
the week is set automatically in accordance with the date  
setting.  
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the  
+
Pressing + or while the Time Setting Screen is on the display  
Press to  
Press to  
clock.  
causes the seconds count to be reset to 00.  
decrease  
the flashing  
digits.  
increase  
the flashing  
digits.  
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.  
°C/°F  
SET  
Each press of + or while the 12-hour/24-hour Timekeeping  
Screen is on the display toggles between 12-hour and 24-hour  
timekeeping.  
Alarm Off  
Snooze Alarm On  
Snooze on  
indicator  
Alarm time  
PM  
indicator  
Date  
(month - day)  
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.  
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for  
about three minutes without performing any operation.  
Day of the week  
Current time  
(Hour, minutes,  
seconds)  
Alarm on  
indicator  
Current  
temperature  
Current  
humidity  
1

GE JP970 User Manual
GE 681131691406 User Manual
Fagor America Portable Induction Cooktop User Manual
Envision Peripherals Envision H170L User Manual
Emerson EM2246HS User Manual
Electrolux SG 454 User Manual
Dell S2209W User Manual
Dell Computer Monitor S1909WN User Manual
ClearOne comm Converge 590 User Manual
Acer X193HQ User Manual