General Purpose LCD Monitors
UML-151-90 | UML-171-90 | UML-191-90
en User’s Manual
General Purpose LCD Monitors
Table of Contents | en
iii
Table of Contents
1
Safety
1
1
3
3
8
1.1
1.2
1.3
1.4
Important Safety Instructions
Safety Precautions
Important Notices
Customer Support and Service
2
Unpacking
9
2.1
Parts List
9
3
Exploded View
10
4
Remote Control
12
4.1
Remote Control Battery Installation
12
5
Description
Features
Power
13
13
13
5.1
5.2
6
Installing the Monitor
13
13
14
14
14
15
16
16
16
6.1
6.2
6.2.1
6.2.2
6.3
6.4
6.5
6.6
Ventilation
Mounting the Monitor
Desktop Installation
Wall Mount Installation
Connecting the Composite Video Signal to the Monitor
Connecting the Y/C (S-Video) Signal to the Monitor
Connecting the PC Signal to the Monitor
Single / Multiple Monitor Configuration
7
Navigating the Monitor
Navigating the Front Panel
Navigating the Monitor On-screen Display (OSD)
On-screen Display Menus
Custom Menu
17
17
18
19
19
20
21
7.1
7.2
7.3
7.4
7.5
7.6
Picture / Sound Menu
Setup Menu
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
iv
en | Table of Contents
General Purpose LCD Monitors
8
Power Management
22
22
22
8.1
8.2
Power Consumption
LED Indicator
9
Trouble Shooting Guide
Maintenance
23
24
25
10
11
Technical Specifications
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Safety | en
1
1
Safety
1.1
Important Safety Instructions
Read, follow, and retain for future reference all of the following safety instructions. Heed all
warnings on the unit and in the operating instructions before operating the unit.
1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions
provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist
fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Heat Sources - Do not install the unit near any heat sources such as radiators, heaters,
stoves, or other equipment (including amplifiers) that produce heat.
3. Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent
overheating and ensure reliable operation. Do not block or cover these openings. Do not
place the unit in an enclosure unless proper ventilation is provided, or the manufacturer's
instructions have been adhered to.
4. Water - Do not use this unit near water, for example near a bathtub, washbowl, sink,
laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor
installation, or in any area classified as a wet location. To reduce the risk of fire or
electrical shock, do not expose this unit to rain or moisture.
5. Object and liquid entry - Never push objects of any kind into this unit through openings
as they may touch dangerous voltage points or short-out parts that could result in a fire
or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled
with liquids, such as vases or cups, on the unit.
6. Lightning - For added protection during a lightning storm, or when leaving this unit
unattended and unused for long periods, unplug the unit from the wall outlet and
disconnect the cable system. This will prevent damage to the unit from lightning and
power line surges.
7. Controls adjustment - Adjust only those controls specified in the operating instructions.
Improper adjustment of other controls may cause damage to the unit. Use of controls or
adjustments, or performance of procedures other than those specified, may result in
hazardous radiation exposure.
8. Overloading - Do not overload outlets and extension cords. This can cause fire or
electrical shock.
9. Power cord and plug protection - Protect the plug and power cord from foot traffic,
being pinched by items placed upon or against them at electrical outlets, and its exit
from the unit. For units intended to operate with 230 VAC, 50 Hz, the input and output
power cord must comply with the latest versions of IEC Publication 227 or IEC Publication
245.
10. Power disconnect - Units with or without ON/OFF switches have power supplied to the
unit whenever the power cord is inserted into the power source; however, the unit is
operational only when the ON/OFF switch is in the ON position. The power cord is the
main power disconnect device for switching off the voltage for all units.
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
2
en | Safety
General Purpose LCD Monitors
11. Power sources - Operate the unit only from the type of power source indicated on the
label. Before proceeding, be sure to disconnect the power from the cable to be installed
into the unit.
–
–
For battery powered units, refer to the operating instructions.
For external power supplied units, use only the recommended or approved power
supplies.
–
–
For limited power source units, this power source must comply with EN60950.
Substitutions may damage the unit or cause fire or shock.
For 24 VAC units, voltage applied to the unit's power input should not exceed 10%,
or 28 VAC. User-supplied wiring must comply with local electrical codes (Class 2
power levels). Do not ground the supply at the terminals or at the unit's power
supply terminals.
–
If unsure of the type of power supply to use, contact your dealer or local power
company.
12. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
13. Damage requiring service - Unplug the unit from the main AC power source and refer
servicing to qualified service personnel when any damage to the equipment has
occurred, such as:
–
–
–
–
–
–
–
the power supply cord or plug is damaged;
exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
liquid has been spilled in or on the equipment;
an object has fallen into the unit;
unit has been dropped or the unit cabinet is damaged;
unit exhibits a distinct change in performance;
unit does not operate normally when the user correctly follows the operating
instructions.
14. Replacement parts - Be sure the service technician uses replacement parts specified by
the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical shock, or other hazards.
15. Safety check - Safety checks should be performed upon completion of service or repairs
to the unit to ensure proper operating condition.
16. Installation - Install in accordance with the manufacturer's instructions and in
accordance with applicable local codes.
17. Attachments, changes or modifications - Only use attachments/accessories specified by
the manufacturer. Any change or modification of the equipment, not expressly approved
by Bosch, could void the warranty or, in the case of an authorization agreement, authority
to operate the equipment.
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Safety | en
3
1.2
Safety Precautions
DANGER! High risk:
This symbol indicates an imminently hazardous situation such as “Dangerous Voltage”
inside the product. If not avoided, this will result in an electrical shock, serious bodily
injury, or death.
WARNING! Medium risk:
Indicates a potentially hazardous situation. If not avoided, this could result in serious bodily
injury or death.
!
!
!
CAUTION! Medium Risk
Indicates a potentially hazardous situation. If not avoided, this may result in minor or
moderate injury. Alerts the user to important instructions accompanying the unit.
CAUTION! Low risk: (without safety alert symbol)
Indicates a potentially hazardous situation. If not avoided, this may result in property
damage or risk of damage to the unit.
NOTICE!
This symbol indicates information or a company policy that relates directly or indirectly to
the safety of personnel or protection of property.
1.3
Important Notices
Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit
may fall, causing serious injury and/or serious damage to the unit. Use only with the cart,
stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use
caution and care when moving the cart/apparatus combination to avoid injury from tip-over.
Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to
overturn. Mount the unit per the manufacturer's instructions.
All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at
least 3 mm in each pole, into the electrical installation of the building.
If it is needed to open the housing for servicing and/or other activities, use this all-pole switch
as the main disconnect device for switching off the voltage to the unit.
Camera grounding - For mounting the camera in potentially damp environments, ensure to
ground the system using the ground connection of the power supply connector (see section:
Connecting external power supply).
Camera lens - An assembled camera lens in the outdoor housing must comply and be tested
in accordance with UL/IEC60950. Any output or signal lines from the camera must be SELV or
Limited Power Source. For safety reasons the environmental specification of the camera lens
assembly must be within the environmental specification of -10 °C (14 °F) to 50 °C (122 °F).
Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140
feet, in accordance with NEC800 (CEC Section 60).
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
4
en | Safety
General Purpose LCD Monitors
Coax grounding:
–
–
Ground the cable system if connecting an outside cable system to the unit.
Connect outdoor equipment to the unit's inputs only after this unit has had its grounding
plug connected to a grounded outlet or its ground terminal is properly connected to a
ground source.
–
–
Disconnect the unit's input connectors from outdoor equipment before disconnecting
the grounding plug or grounding terminal.
Follow proper safety precautions such as grounding for any outdoor device connected to
this unit.
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides
information regarding proper grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors, location of discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
NOTICE!
This device is intended for use in public areas only.
U.S. federal law strictly prohibits surreptitious recording of oral communications.
Your Bosch product was developed and manufactured with high-quality material and
components that can be recycled and reused. This symbol means that electronic and
electrical appliances, which have reached the end of their working life, must be collected and
disposed of separately from household waste material. Separate collecting systems are
usually in place for disused electronic and electrical products. Please dispose of these units at
an environmentally compatible recycling facility, per European Directive 2002/96/EC.
Environmental statement - Bosch has a strong commitment towards the environment. This
unit has been designed to respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid
electrostatic discharge.
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when
handling the electrostatic-sensitive printed circuit boards.
Fuse rating - For security protection of the device, the branch circuit protection must be
secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC
Section 60).
Grounding and polarization - This unit may be equipped with a polarized alternating current
line plug (a plug with one blade wider than the other blade). This safety feature allows the
plug to fit into the power outlet in only one way. If unable to insert the plug fully into the
outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for
earth grounding). This safety feature allows the plug to fit into a grounded power outlet only.
If unable to insert the plug into the outlet, contact a locally certified electrician to replace the
obsolete outlet. Do not defeat the safety purpose of the grounding plug.
Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive
force or shock may damage the unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially regarding clearance from
power and lightning conductors and transient protection, must be in accordance with NEC725
and NEC800 (CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readily accessible disconnect device in
the building installation wiring.
Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Safety | en
5
PoE - Never supply power via the Ethernet connection (PoE) when power is already supplied
via the power connector.
Power disconnect - Units have power supplied whenever the power cord is inserted into the
power source. The power cord is the main power disconnect for all units.
Power lines - Do not locate the camera near overhead power lines, power circuits, or
electrical lights, nor where it may contact such power lines, circuits, or lights.
SELV
All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should
only be connected to other SELV circuits.
Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the
SELV circuit to the Telephone Network Voltage (TNV) circuits.
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security
Systems cannot be held liable for any damage that results from missing video information. To
minimize the risk of lost digital information, Bosch Security Systems recommends multiple,
redundant recording systems, and a procedure to back up all analog and digital information.
NOTICE!
This is a class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.
FCC & ICES INFORMATION
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:
–
–
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause
undesired operation.
Note
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits
are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and
radiates radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his expense.
Intentional or unintentional modifications, not expressly approved by the party responsible
for compliance, shall not be made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the dealer or an experienced
radio/television technician for corrective action.
The user may find the following booklet, prepared by the Federal Communications
Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This
booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock
No. 004-000-00345-4.
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
6
en | Safety
General Purpose LCD Monitors
INFORMATIONS FCC ET ICES
(modèles utilisés aux États-Unis et au Canada uniquement)
Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux
conditions suivantes:
–
–
cet appareil ne peut pas provoquer d'interférence nuisible et
cet appareil doit pouvoir tolérer toutes les interférences auxquelles il est soumit, y
compris les interférences qui pourraient influer sur son bon fonctionnement.
AVERTISSEMENT: Suite à différents tests, cet appareil s’est révélé conforme aux exigences
imposées aux appareils numériques de Classe A en vertu de la section 15 du règlement de la
Commission fédérale des communications des États-Unis (FCC). Ces contraintes sont
destinées à fournir une protection raisonnable contre les interférences nuisibles quand
l'appareil est utilisé dans une installation commerciale. Cette appareil génère, utilise et émet
de l'energie de fréquence radio, et peut, en cas d'installation ou d'utilisation non conforme
aux instructions, générer des interférences nuisibles aux communications radio. L’utilisation
de ce produit dans une zone résidentielle peut provoquer des interférences nuisibles. Le cas
échéant, l’utilisateur devra remédier à ces interférences à ses propres frais.
Au besoin, l’utilisateur consultera son revendeur ou un technicien qualifié en radio/télévision,
qui procédera à une opération corrective. La brochure suivante, publiée par la Commission
fédérale des communications (FCC), peut s’avérer utile : « How to Identify and Resolve Radio-
TV Interference Problems » (Comment identifier et résoudre les problèmes d’interférences de
radio et de télévision). Cette brochure est disponible auprès du U.S. Government Printing
Office, Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345-4.
AVERTISSEMENT: Ce produit est un appareil de Classe A. Son utilisation dans une zone
résidentielle risque de provoquer des interférences. Le cas échéant, l’utilisateur devra
prendre les mesures nécessaires pour y remédier.
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL
2044. UL Certification does not cover the performance or reliability of the security or signaling
aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED
FUNCTIONS OF THIS PRODUCT.
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in UL's Standard(s) for Safety for Information Technology Equipment, UL
60950-1. UL Certification does not cover the performance or reliability of the security or
signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-
RELATED FUNCTIONS OF THIS PRODUCT.
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Safety | en
7
Copyright
This user guide is the intellectual property of Bosch Security Systems, Inc. and is protected by
copyright.
All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
NOTICE!
This user guide has been compiled with great care and the information it contains has been
thoroughly verified. The text was complete and correct at the time of printing. The ongoing
development of the products may mean that the content of the user guide can change without
notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly
from faults, incompleteness or discrepancies between the user guide and the product
described.
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
8
en | Safety
General Purpose LCD Monitors
1.4
Customer Support and Service
If this unit needs service, contact the nearest Bosch Security Systems Service Center for
authorization to return and shipping instructions.
Service Centers
USA
Telephone: 800-366-2283 or 585-340-4162
Fax: 800-366-1329
Email: [email protected]
Customer Service
Telephone: 888-289-0096
Fax: 585-223-9180
Email: [email protected]
Technical Support
Telephone: 800-326-1450
Fax: 585-223-3508 or 717-735-6560
Email: [email protected]
Repair Center
Telephone: 585-421-4220
Fax: 585-223-9180 or 717-735-6561
Email: [email protected]
Canada
Telephone: 514-738-2434
Fax: 514-738-8480
Europe, Middle East & Asia Pacific Region
Telephone: 44 (0) 1495 274558
Fax: 44 (0) 1495 274280
Email: [email protected]
More information
For additional information, please contact your Bosch Security Systems representative or visit
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Unpacking | en
9
2
Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing,
notify your Bosch Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit and must be
used if returning the unit for service. Save it for possible future use.
2.1
Parts List
The following table lists the parts included:
Quantity Part
1
1
2
UML-151-90, UML-171-90, or UML-191-90 Color LCD Flat Panel Monitor
Installation manual
Power Cords, 3-wire with grounded plug 1.8 m (6 ft) long:
one with a U.S plug type and one with a European Continental plug type
1
1
VGA to VGA (D-SUB) cable, 1.5 m (5 ft)
Power Supply (brick):
UML-151-50: 12 VDC, 3.3 A, 100–240 VAC, 50/60 Hz
UML-171-50: 12 VDC, 4.1 A, 100–240 VAC, 50/60 Hz
UML-191-90: 12 VDC, 4.1 A, 100-240 VAC, 50/60 Hz
1
1
Remote control with two (2) AAA batteries
Audio cable PC-style
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
10 en | Exploded View
General Purpose LCD Monitors
3
Exploded View
Figure 3.1 Front Panel
Reference # Button
Description
1
2
3
Input Button
Menu Button
Selects the signal to be displayed.
Selects the on-screen display (OSD).
Adjusts the value when in
the OSD.
Scrolls up in the OSD.
4
Adjusts the value when in
the OSD or auto adjusts
when in PC mode.
Scrolls down in the OSD.
5
6
Decreases the value when in Scrolls left in the OSD.
the OSD. Decreases volume.
Increases the value when in Scrolls right in the OSD.
the OSD. Increases volume.
7
8
IR Sensor
Remote control sensor.
Power Button / LED Power On (green)
Indicator
Standby (blinking red)
Unsupported Mode (green)
Power Off (red)
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Exploded View | en
11
Figure 3.2 Bottom Panel
Reference # Connector
Description
1
DC 12 V IN
UML-151-50: 3.3 A
UML-171-50: 4.1 A
UML-191-90: 4.1 A
2
VGA IN
PC Signal Input
3
VIDEO 1 (AV1) IN
VIDEO 1 (AV1) OUT
VIDEO 2 (AV2) IN
VIDEO 2 (AV2) OUT
S-VIDEO (Y/C) IN
S-VIDEO (Y/C) OUT
AUDIO IN (L+R)
PC Stereo IN
Composite signal input for AV1
Video looping output for AV1
Composite signal input for AV2
Video looping output for AV2
Y/C separated signal input
4
5
6
7
8
Y/C separated signal looping output
Stereo audio signal input
9, 10
11
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
12 en | Remote Control
General Purpose LCD Monitors
4
Remote Control
This section details the functions and the usage of the Bosch remote control.
Button
Function
POWER
SOURCE
APC (Auto
Turns the power ON and OFF.
Selects the PC or Video source.
Selects the Picture mode. Continuously press this button
Picture Control) to change the selection.
ACC (Auto Color Selects the Color mode. Continuously press this button
Control)
AV1
AV2
to change the selection.
Selects the AV1 mode. Press this button to display AV1.
Selects the AV2 mode. Press this button to display AV2.
Selects the S-VIDEO mode. Press this button to display
S-VIDEO.
S-VIDEO
PC
Selects the PC mode. Press this button to display PC.
Auto adjusts to the graphics adaptor.
Mutes the sound.
Displays the OSD. Pressing the Menu button returns you
to the Main menu from anywhere in the OSD menus.
Exits the OSD.
AUTO
MUTE
MENU
EXIT
UP
DOWN
ENTER
Moves the cursor up in an OSD menu.
Moves the cursor down in an OSD menu.
Accepts your selection or displays the current mode
when in the OSD menu.
Moves the cursor left, decreases item values in an OSD
menu, or decreases volume.
VOL
Moves the cursor right, increases item values in an OSD
menu, or decreases volume.
VOL
INFO
Displays the information for the settings currently
selected for CVBS or PC Input.
STILL
Freezes the video by pressing the button once and
releases the freeze by pushing it again.
4.1
Remote Control Battery Installation
1. Turn the remote over (buttons facing down) and push down on the cover and slide it off.
2. Insert two (2) new AAA alkaline batteries, matching the batteries to the (+) and (-) marks
inside the battery case.
Figure 4.1 Remote Control Battery Placement
3. Slide the battery cover back into place.
Note: Replace batteries when required or at least once a year. Dispose of used batteries
properly.
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Description | en
13
5
Description
The Bosch General Purpose Family of LCD monitors display PAL or NTSC standard color
pictures in CCTV systems. Two (2) looping Composite Video BNC connector inputs and one
(1) looping Y/C (S-Video) input using a 4-pin mini-DIN are included with each model. In
addition, each works with a VGA signal.
Monitor control functions are accessed via the front panel push buttons and the multi-
language On-screen Display (OSD). See Figure 3.1 for front panel descriptions.
5.1
Features
The General Purpose LCD Color Panel Display Monitor Series are designed to display Analog
VGA and Composite Video signals.
–
–
–
–
15-inch, 17-inch, and 19-inch models
100-240 VAC Power Supply
NTSC/PAL Auto-Detect
High-resolution Display
–
–
–
1024 x 768 (UML-151-90)
1280 x 1024 (UML-171-90)
1280 x 1024 (UML-191-90)
–
–
–
–
VGA Input
Composite Video Input
Y/C Input (S-Video)
On-screen Display (OSD) with Multiple Languages
5.2
Power
Model No.
Rated Voltage Voltage Range
Power at Rated Voltage Sync Format
UML-151-90
120/230 VAC,
50/60 Hz
100-240 VAC
100-240 VAC
100-240 VAC
25 W (max)
40 W (max)
45 W (max)
NTSC/PAL
NTSC/PAL
NTSC/PAL
UML-171-90
UML-191-90
120/230 VAC,
50/60 Hz
120/230 VAC,
50/60 Hz
6
Installing the Monitor
This chapter outlines the procedures to install the UML-151-90, UML-171-90, or the UML-191-
90. A qualified service person should install the monitor and adhere to all local codes.
6.1
Ventilation
To prevent overheating, ensure that the ventilation openings on the rear of the monitor are
not covered.
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
14 en | Installing the Monitor
General Purpose LCD Monitors
6.2
Mounting the Monitor
The UML-151-90, UML-171-90, and the UML-191-90 are designed for use on a desktop or
mounted to a wall or rack.
6.2.1
Desktop Installation
The Bosch General Purpose monitors are delivered with a 3-pole US-style power cord and a 3-
pole Euro-style power cord. Use the US-style power cord where 120 VAC, 60 Hz power is
available; use the Euro-style power cord where 230 VAC, 50 Hz power is available. The
monitor automatically adjusts to either power input voltage.
6.2.2
Wall Mount Installation
The square mounting holes (100 mm [3.9 in.] centers) are compatible with the Bosch UMM-
LW-20B fixed wall mount or the UMM-LW-30B swivel/tilt. To install the wall mount, do the
following:
1. Remove the base from the LCD panel section by unscrewing the four (4) holding screws
before separating the base from the panel.
Figure 6.1 Removing the Base
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Installing the Monitor | en
15
2. Mount the unit to the mounting device (not provided) using the four (4) mounting holes
on the rear panel. The square mounting hole patterns are standard on 100 mm (3.9 in.)
centers. Four (4) M4 x 10 mm screws are required and are provided with the Bosch
mounting kit.
Figure 6.2 Mounting the Device
6.3
Connecting the Composite Video Signal to the Monitor
There are two (2) BNC connectors located on the rear of the monitor for composite video
input and two (2) BNC connectors for composite video outputs (see Figure 3.2).
NOTE: All video inputs are passive loop-through. The impedance is automatically set to 75
ohm by the input of the signal on the input connector, while operating in a single connection
mode (see Figure 6.5). If a cable is also connected to the output connector, the video signal
can be passed on to another monitor connected to it via the passive loop-through function. Up
to three (3) looping monitors may be connected in this manner (see Figure 6.6).
NOTICE! To select between AV1 and AV2, press Input (Figure 3.1, Item 1) located on the front
of the monitor
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
16 en | Installing the Monitor
General Purpose LCD Monitors
6.4
Connecting the Y/C (S-Video) Signal to the Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C) input (see Figure 6.3).
NOTE: Both Y and C inputs are terminated with 75 ohm.
Figure 6.3 Y/C Connection Pinout
Reference
Input
1
2
3
4
GND
GND
Y-signal IN or OUT
C-signal IN or OUT
6.5
6.6
Connecting the PC Signal to the Monitor
The monitor can be connected to the analog VGA signal by using the provided VGA cable (D-
SUB to D-SUB).
Figure 6.4 VGA Input
Single / Multiple Monitor Configuration
Figure 6.5 Single Monitor Configuration
Reference #
Description
1
2
3
4
Video Camera
VIDEO 1 (AV1) IN
VIDEO 1 (AV1) OUT
VCR
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Navigating the Monitor | en
17
Figure 6.6 Multiple Monitor Configuration
Reference #
Description
1
2
3
Video Camera
VIDEO 1 (AV1) IN
VIDEO 1 (AV1) OUT
7
Navigating the Monitor
7.1
Navigating the Front Panel
Use the front panel to make any necessary OSD adjustments to the UML-151-90, UML-171-90,
or the UML-191-90. See the figure below for an explanation of the front panel.
Figure 7.1 Front Panel Buttons
Reference # Button
Description
1
2
3
Input Button
Selects the signal to be displayed.
Selects the on-screen display (OSD).
Menu Button
Adjusts the value when in
the OSD.
Scrolls up in the OSD.
4
Adjusts the value when in
the OSD or auto adjusts
when in PC mode.
Scrolls down in the OSD.
5
6
Decreases the value when in Scrolls left in the OSD.
the OSD. Decreases volume.
Increases the value when in Scrolls right in the OSD.
the OSD. Increases volume.
7
8
IR Sensor
Remote control sensor.
Power Button / LED Power On (green)
Indicator
Standby (blinking red)
Unsupported Mode (green)
Power Off (red)
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
18 en | Navigating the Monitor
General Purpose LCD Monitors
7.2
Navigating the Monitor On-screen Display (OSD)
The UML-151-90, UML-171-90, and the UML-191-90 have two (2) modes: Video and VGA. The
LCD is programmed through the on-screen display (OSD) menus and submenus where an
operator can select operating parameters. To access the OSD menus, press the Menu button.
Use the front panel of the monitor to make any necessary adjustments to the OSD.
To navigate the set up menus, follow the steps below:
1. Connect the CVBS or VGA cable.
2. Press the Power button to turn on the unit (see Figure 7.1).
3. If required, press the Input button to select the appropriate signal.
4. Press the Menu button to activate the main menu selections (see Figure 7.1).
5. Press the and the buttons to select a menu.
6. Press the Input button to enter the selected menu.
7. Press the and the button to toggle the OSD values.
8.
When finished, scroll to Exit and press the Menu button. Note: If there is no Exit button,
press the Menu button.
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Navigating the Monitor | en
19
7.3
On-screen Display Menus
There are three (3) on-screen menus that allow you to customize your settings. Press the
Menu button to access the OSD menu.
Icon
Menu
Function
Custom
Adjusts the Brightness, Contrast, Color, Tint, and the Sharpness level for video
performance of the OSD. (The menu options differ between the Video and PC
modes.)
Picture / Sound Adjusts the Picture Mode, Color Tone, Mute, Volume, Size, DNR, Comb Filter, and
the PC settings. (The menu options differ between the Video and PC modes.)
N/A
Not available with this model.
Set Up
Enables user to Reset the factory default settings and to adjust the Language,
OSD Tone, Blue Screen and Key Lock.
7.4
Custom Menu
To access the Custom menu, press the Menu button on the front panel of the monitor. Next,
press the right arrow and then press the up and down arrows to select a submenu. Press the
left and right arrow buttons to increase or decrease the values. When finished, press the
Menu button to save any changes, then press the Menu button again to exit the OSD.
Custom
Brightness
Contrast
Color
50
50
50
Tint
Sharpness
G 100
20
:Move
:Input
:Menu
Table 7.1 Custom Menu (Video Mode)
Custom
Brightness
Contrast
60
55
:Move
:Input
:Menu
Table 7.2 Custom Menu (PC Mode)
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
20 en | Navigating the Monitor
General Purpose LCD Monitors
Submenu
Definition
Brightness
Contrast
Adjusts the brightness level for video performance (range 0-100).
Adjusts the contrast level for video performance
(range 0-100).
Color
Adjusts the overall intensity of the screen (range 0-100).
Adjusts the tint of the picture (range 0-100). NTSC only.
Adjusts the sharpness level for video performance (range 0-100).
Tint
Sharpness
7.5
Picture / Sound Menu
To access the Picture / Sound menu, press the Menu button on the front panel of the
monitor, then press the left and right arrows to select the Picture / Sound icon. Press the up
and down arrows to select the Picture / Sound submenu.
Picture/Sound
Picture Mode Custom
Color Tone
Mute
Normal
Off
Volume
Size
20
4:3
DNR
On
3D Comb
On
:Move
:Input
:Menu
Table 7.3 Picture / Sound Menu (Video Mode)
Picture/Sound
Picture Mode Custom
Color Tone
Mute
Normal
Off
Volume
Size
20
4:3
PC
:Move
:Input
:Menu
Table 7.4 Picture / Sound Menu (PC Mode)
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Navigating the Monitor | en
21
Submenu
Definition
Picture Mode
(Video Mode)
Selects the automatic picture control mode. Choices are:
Custom: User selected values of the Custom menu are applied.
Dynamic: Automatically adjusts the Brightness, Contrast, and Sharpness, maximizing
the video quality in the picture.
Standard: Applies factory default values.
Picture Mode (PC
Mode)
Selects the automatic picture control mode. Choices are:
Custom: User selected values of the Custom menu are applied.
High: Uses the following values: Brightness = 70, Contrast = 80
Middle: Uses the following values: Brightness = 60, Contrast = 70.
Low: Uses the following values: Brightness = 50, Contrast = 60.
Color Tone
Mute
Selects the color temperature. Choices are: Cool 9300K, Normal 6500K, Warm 5000K.
Enables/disables audio. Choices are: On and Off.
Volume
Controls built-in speaker output volume (range 0-100).
Size (Video Mode) Selects the Aspect Ratio Control mode. Choices are: 4:3, Panorama, Zoom1, Zoom2,
Wide.
DNR (Video Mode) Turns Noise Reduction On or Off. Turning this feature OFF reduces the video quality
slightly, but improves the monitors response time to MOTION.
PC (PC Mode)
Selects between Auto or manual adjustment of the desktop screen. Auto Adjust: Auto
synchronizes screen to graphics adaptor.
Manual choices are: Phase (range 0-100), H-Position (range 0-100), V-Position (range
0-100), Frequency (range 0-100).
3D Comb (Video
Mode)
Activates the 3D comb filter.
7.6
Setup Menu
To access the Setup menu, press the Menu button on the front panel of the monitor, then
press the left and right arrows to select the Setup icon. Press the up and down arrows to
select the Setup submenu.
Setup
Reset
Language
OSD Tone
Blue Screen
Key Lock
English
Blue
Off
Off
Firmware Version X.XX
:Move
:Input
:Menu
Table 7.5 Setup Menu
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
22 en | Power Management
General Purpose LCD Monitors
Submenu
Definition
Reset
Restores default settings.
Language
Adjusts the language of the OSD. Choices are: English, French,
German, Italian, Dutch, Spanish, and Portuguese.
OSD Tones
Blue Screen
Selects the type of background for the OSD menu. Choices are:
Transparency and Blue.
Enables or disables video loss indication. Choices are:
On: displays a blue background when video loss is detected.
Off: displays a black backgound when video loss is detected.
Enables or disables the Key Lock function.
Key Lock
Firmware Version Displays the release level of the monitor firmware.
NOTICE! When key lock is enabled through the front panel, use either the remote control or
the front panel buttons to disable the key lock command. To disable the key lock feature using
the front panel buttons, press and hold both the Input and the Menu buttons until the monitor
displays the Key Unlocked message.
8
Power Management
These monitors feature a power management system to “power down” upon receipt of the
display power management signaling (DPMS) from a DPMS video card.
To conserve energy and extend monitor life, these monitors automatically start a power saving
mode when the input signal disappears (such as when a PC enters sleep mode). The power
saving mode is active when the LED on the control button panel switches from green to amber
and normal operation resumes automatically when the input signal is restored.
The monitor enters an appropriate mode through identifying each of the three modes of the
signaling system.
8.1
8.2
Power Consumption
Mode
ON
151
171
191
25 W
< 5.0 W
40 W
< 5.0 W
45 W
< 5.0 W
STANDBY
LED Indicator
The power management feature of the monitor is comprised of four stages:
Power On (green), Standby (blinking red), Unsupported Mode (green), and Power Off (red).
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Trouble Shooting Guide | en
23
9
Trouble Shooting Guide
Problem
Solution
No image is displayed on screen
–
Check that the power cord of the monitor is securely connected into the
wall outlet or grounded extension cable or strip.
–
–
Power switch should be in the ON position and the LED lit.
Check that the Brightness and/or Contrast adjustments of the display have
not been turned down to minimum levels.
“Check Input Signal” message is
displayed in PC mode
–
–
The signal cable should be completely connected to the video card/
computer.
The video card should be completely seated in its slot and the computer
switched ON.
Display image is not centered, is Push the down key to activate the Autoset function.
too small, or too large in the PC
mode
Vertical or horizontal noise is
Adjust the Clock and Phase in the OSD submenu.
present in the picture in PC mode
Incorrect colors
–
Press the Menu button on the front panel of the monitor, then press the
right arrow to select the Color menu. Press the down arrow on the front
panel and select 9300K or 6500K.
- or -
–
Press the Menu button on the front panel of the monitor, then press the
right arrow to select the Utility menu. Press the down arrow on the front
panel and select Recall to reset to the default settings.
The error message “Unsupport
Mode” is displayed
PC is operating with either a resolution or timing mode that is not supported.
Change the PC timing mode to one of the valid combinations below:
Timing mode
640 x 480; 60/72/75 Hz
800 x 600; 60/72/75 Hz
1024 x 768; 60/70/75 Hz
1280 x 1024; 60/75 Hz (17 and 19 inch only)
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
24 en | Maintenance
General Purpose LCD Monitors
10
Maintenance
To clean the LCD panel, wipe off water droplets or oil immediately with absorbent cotton or a
soft lint-free cloth. Staining and discoloration may occur if left on the panel for long periods.
If the surface (polarizer) of the LCD panel is dirty or stained, use absorbent cotton or a soft
lint-free cloth to remove the residue as follows:
1. Turn off the computer or display.
2. Do not spray any liquid directly on the screen. Dampen a clean, soft, lint-free cloth with
water only (using a paper towel or dirty cloth can scratch the screen).
3. Gently wipe the screen starting from the top of the screen to bottom wiping in a
downward motion. Be careful not to press too hard to avoid damaging the screen.
4. To avoid streaking, wipe the screen again with another clean, dry, lint-free cloth.
NOTICE! If water does not work, use a mild cleaner labeled for use with LCD panels, available
at office supply stores.
Do not use any of the following as a cleaning agent:
–
–
–
–
–
–
Ketone type materials
Ethyl alcohol
Ethyl acid
Toluene
Methyl chloride
Ammonia
Use of these materials may permanently damage the polarizer due to a chemical reaction.
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Technical Specifications | en
25
11
Technical Specifications
UML-151-90
UML-171-90
UML-191-90
Electrical
Rated Voltage
Voltage Range
Power at Rated Voltage
120/230 VAC, 50/60 Hz
100-240 VAC
120/230 VAC, 50/60 Hz
100-240 VAC
120/230 VAC, 50/60 Hz
100-240 VAC
25 W operation, 5 W
standby
40 W operation, 5 W
standby
45 W operation, 5 W
standby
Sync Format
PAL/NTSC
TFT LCD
PAL/NTSC
TFT LCD
PAL/NTSC
TFT LCD
LCD Panel
Screen Size (H x V)
304.1 x 228.1 mm
(12.0 x 9.0 in.)
338.0 x 270.0 mm
(13.3 x 10.6 in.)
376.0 x 301.0 mm
(14.8 x 11.9 in.)
Viewable Picture Area
Pixel Pitch (H x V)
Resolution
15 in. (381 mm) measured
diagonally
17 in. (432 mm) measured
diagonally
19 in. (483 mm) measured
diagonally
0.297 x 0.297 mm
(0.01 x 0.01 in.)
0.264 x 0.264 mm
(0.01 x 0.01 in.)
0.294 x 0.294 mm
(0.01 x 0.01 in.)
1024 x 768 pixels, 500 TV
lines typical
1280 x 1024 pixels, 500 TV 1280 x 1024 pixels, 500 TV
lines typical
5:4
lines typical
5:4
Aspect Ratio
4:3
Display Colors
16.7 million colors
16.7 million colors
8-bit interface; 16.7 million
colors
Response Time
Backlight
< 8 ms
< 5 ms
5 ms
Two (2) cold cathode
Two (2) cold cathode
Four (4) cold cathode
fluorescent tubes, rated life fluorescent tubes, rated life fluorescent tubes, rated life
50,000 hours 50,000 hours 50,000 hours
LCD Panel Optical Characteristics
Luminance
250 cd/m, anti-glare, hard-
300 cd/m, anti-glare, hard- 300 cd/m, anti-glare, hard-
coating treatment
600:1
coating treatment
1000:1
coating treatment
800:1
Contrast Ratio (CR)
Viewing Angle
160°/160°
160°/160°
160°/160°
(Horizontal/Vertical)
Video Input
Composite Video (CVBS) 1.0 Vp-p (0.5–1.5 Vp-p), automatic switching from 75 W unbalanced termination to Hi-Z
with passive loop-through operation
Y/C (S-video)
0.7 Vp-p (Y-signal), 0.3 Vp-p (C-signal), 75 W termination
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
26 en | Technical Specifications
General Purpose LCD Monitors
PC Input
Analog RGB
0.7 Vp-p (0.5–1 Vrms)
PC Timing Modes
640 x 480
60/72/75 Hz
60/72/75 Hz
60/70/75 Hz
60/72/75 Hz
60/72/75 Hz
60/70/75 Hz
60/75 Hz
60/72/75 Hz
60/72/75 Hz
60/70/75 Hz
60/75 Hz
800 x 600
1024 x 768
1280 x 1024
Controls
Front Panel
Input
Push-buttons
Selects: Video1, Video2, S-video, VGA
Menu
Selects on-screen display (OSD), up cursor, down cursor/auto adjust, left cursor, right
cursor
Power
On/Off
Front Panel Lockout
Multiple push-button combination
On-screen Display
Video Mode
Input Source, Screen, OSD, Utility
Input Screen, OSD, Color, Utility
PC Mode
Indicators
LED
Power On (green)
Standby (blinking red)
Unsupported Mode (green)
Power Off (red)
On-screen
VGA: Check input signal
Video: Blue or black screen indicates video loss on AV1, AV2, or S-VIDEO.
Connectors
Video 1 (AV1)
Video 2 (AV2)
Y/C (S-video)
RGB
Composite video: two (2) BNC (1 in, 1 out)
Composite video: two (2) BNC (1 in, 1 out)
Two (2) mini-DIN, 4-pin (1 in, 1 out)
One (1) VGA cable included
Power Input
5.5 mm DC input jack
Power Adapter Input: 100–240 VAC, 50/60 Hz Input: 100–240 VAC, 50/60 Hz Input: 100–240 VAC, 50/60 Hz
(included)
Output: 12 VDC, 3.3 A
Output: 12 VDC, 4.1 A
Output: 12 VDC, 4.1 A
Mechanical
Cabinet Material
Finish
ABS plastic
Black
Mount
Wall mounting compatible with standard bracket, 100-mm centers, M4 thread
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
General Purpose LCD Monitors
Technical Specifications | en
27
Dimensions (W x H x D)
Monitor with Base
352 x 355 x 200 mm
382.4 x 390.5 x 200.0 mm
(15.1 x 15.4 x 7.9 in.)
430 x 428 x 200 mm
(16.9 x 16.9 x 7.9 in.)
(13.86 x 14.0 x 7.9 in.)
Monitor Only
352 x 292 x 58 mm
382.4 x 330.0 x 58.7 mm
(15.1 x 13.0 x 2.3 in.)
420 x 374 x 60 mm
(13.9 x 11.5 x 2.2 in.)
(16.9 x 14.7 x 2.4 in.)
Weight
Monitor with Base
Monitor Only
3.7 kg (8.1 lb)
2.5 kg (5.6 lb)
5.2 kg (11.4 lb)
3.8 kg (8.4 lb)
5.2 kg (11.4 lb)
4.1 kg (9.0 lb)
Environmental
Operating
0°C to 40°C (32°F to 104°F)
Temperature
Storage Temperature
Humidity
–20°C to 60°C (–4°F to 140°F)
Maximum 90%, non-condensing
Parts Included
One (1) Bosch General Purpose Color LCD Flat Panel Monitor
One (1) VGA to VGA cable
Two (2), 3-wire power cords with a grounded plug: one (1) with a European/Continental plug type and one (1)
with a U.S. plug type
Bosch Security Systems, Inc.
User’s Manual
F.01U.127.338 | 2.0 | 2009.05
28 en | Technical Specifications
General Purpose LCD Monitors
F.01U.127.338 | 2.0 | 2009.05
User’s Manual
Bosch Security Systems, Inc.
Americas
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
Asia-Pacific:
Bosch Security Systems Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Phone: +65 6319 3450
Fax: +65 6319 3499
Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, Pennsylvania 17601
USA
Telephone +1 888-289-0096
Fax
+1 585-223-9180
Email: [email protected]
© Bosch Security Systems, 2009; F.01U.127.338 | 2.0 | 2009.05; Data subject to change without notice.
|