Black Box Computer Hardware 802 3af PoE Gigabit Injector, 1 Port User Manual

LPJ001A-F  
802.3af PoE Gigabit Injector, 1-Port  
Exceeds the 802.3af standard.  
Use with IP telephones, wireless access  
points, IP print servers, IP cameras,  
and Bluetooth® access points.  
1. Specifications  
Compliance: cUL/UL®; RoHS  
Insert a screw  
to secure the unit  
to a surface  
Insert a screw to  
secure the unit  
to a surface  
Load (Maximum): 0.35 A  
Regulation: Line and Load: 54–57 VDC under all  
conditions  
Connectors: Data in: (1) RJ-45 (10/100/1000);  
Data/PoE out: (1) RJ-45 (10/100/1000);  
Power: (1) IEC 320 (3-pin)  
Figure 1. Location of metal feet on the power injector.  
Indicators: (3) LEDs: (1) ON, (1) CONNECT, (1) FAULT  
Power: AC input voltage range: 90–264 VAC;  
AC input voltage rating: 100–240 VAC, 47–63 Hz;  
Output: 19.6 W at 56 VDC  
Size: 1.4"H x 2.6"W x 5.5"D (1 x 6.6 x 14 cm)  
Weight: 0.4 lb. (0.2 kg)  
IEC-320 power connector.  
Back panel.  
Power and Data in  
data out  
2. Overview  
Front panel.  
The LPJ001A-F is a high-powered Gigabit power injector  
that exceeds the IEEE 802.3af power standard. The injector provides  
up to 19.6 W of power.  
Figure 2. Ports on the power injector.  
2. Connect the 3-pin IEC320 AC input connector to a  
power source. Power on the injector.  
Use the LPJ001A-F with IP telephones, wireless access points, IP print  
servers, IP cameras, and Bluetooth access points.  
3. Using CAT5e or higher cable, connect the RJ-45 port  
on the injector labeled “IN” to your network switch.  
See Figures 2 and 3.  
3. Setting Up Your Power Injector  
NOTE: Use CAT5e or higher Ethernet cables (not included).  
1. Using screws, affix the metal feet on the front and/or rear to a  
flat surface such as a table or wall. See Figure 1.  
4. Connect the RJ-45 port labeled “OUT” on the injector over  
Ethernet cable to the powered device. See Figures 2 and 3.  
NOTE: The power injector should not use the weight  
of the Ethernet cables for support.  
5. The LEDs will light to diagnose the connection. See Tables 1  
and 2.  
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •  
Customer  
Support  
Information  
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 •  
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 •  

HP Hewlett Packard L1706 17 inch User Manual
GE Profile JP968CC User Manual
GE 26981 User Manual
Elo TouchSystems Elo Entuitive 3000 Series 1525L User Manual
Electrolux 55GX3 User Manual
Dell S2309W User Manual
Datalogic Scanning Universal Keyboard Wedge Connectivity User Manual
Cypress CY2048WAF User Manual
Black Box Computer Hardware LEH1104A 4MMSC User Manual
Asus A7N8X X User Manual