BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
User Guide
BT LYRIC 2500
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
This User Guide provides you with all
Got everything?
the information you need to get the
most from your phone.
BT Lyric 2500 handset
BT Lyric 2500 base unit
Mains power adaptor
(Item code: 022072)
You must first set up your phone
before you can use it. This doesn’t
take long and is easy to do. Just
follow the simple instructions on the
next few pages.
Telephone line cord
2 x NiMH AAA
rechargeable batteries
If you have purchased
a BT Lyric 2500 multiple
pack you will also
receive the following for
each additional handset.
Need help?
BT Lyric 2000 handset
BT Lyric 2000 charger
If you have any problems setting up or using your BT
Lyric 2500, contact the Helpline on 0870 605 8047.
Mains power
adaptor for charger
(Item code: 021299)
Alternatively, you may find the answer in ‘Help’ at the
back of this guide.
2 x NiMH AAA
rechargeable batteries
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
4
In this guide
Getting started
Location . . . . . . . . . . . . . . . . . . . . . .7
Setting up . . . . . . . . . . . . . . . . . . . . .7
Redial a number from the redial list . . .21
Copy a number from the redial list
to the directory . . . . . . . . . . . . . . . . .22
Delete a redial number . . . . . . . . . . . .23
Delete all numbers from the
Getting to know your phone
Handset buttons . . . . . . . . . . . . . . . .10
Handset display icons . . . . . . . . . . . . .11
Base . . . . . . . . . . . . . . . . . . . . . . . . .12
Navigating the menus . . . . . . . . . . . .13
Character map . . . . . . . . . . . . . . . . . .13
Menu map . . . . . . . . . . . . . . . . . . . . .14
redial list . . . . . . . . . . . . . . . . . . . . . .23
Base Settings
Base ringer volume . . . . . . . . . . . . . .24
Base ringer melody . . . . . . . . . . . . . .24
Dial mode . . . . . . . . . . . . . . . . . . . . .25
Changing the base PIN code . . . . . . . .25
Restore default settings . . . . . . . . . . .26
Using the phone
Make an external call . . . . . . . . . . . . .15
Preparatory dialling . . . . . . . . . . . . . .15
End a call . . . . . . . . . . . . . . . . . . . . . .15
Receive a call . . . . . . . . . . . . . . . . . . .15
Earpiece volume . . . . . . . . . . . . . . . .16
Secrecy . . . . . . . . . . . . . . . . . . . . . . .16
Handsfree . . . . . . . . . . . . . . . . . . . . .17
Paging . . . . . . . . . . . . . . . . . . . . . . .18
100 Name and number directory . . . . .18
Store a name and number . . . . . . . . .18
View and dial a name and number . . . .19
Edit a name and number . . . . . . . . . .20
Delete a name and number . . . . . . . . .20
Redial the last number called . . . . . . .21
Handset Settings
Keypad lock . . . . . . . . . . . . . . . . . . . .27
Set the time . . . . . . . . . . . . . . . . . . .27
Handset ringer volume . . . . . . . . . . . .28
Handset ringer melody . . . . . . . . . . . .28
Handset warning tones . . . . . . . . . . . .29
Auto answer . . . . . . . . . . . . . . . . . . .30
Handset name . . . . . . . . . . . . . . . . . .30
Handset language . . . . . . . . . . . . . . .31
BT Calling Features
Caller Display . . . . . . . . . . . . . . . . . . .32
Call list . . . . . . . . . . . . . . . . . . . . . . .32
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
In this guide
5
View and dial from the Calls list . . . . . .32
Copy a Calls list number
to the directory . . . . . . . . . . . . . . . . .33
Delete a Calls list number . . . . . . . . . .34
Delete the whole Calls list . . . . . . . . . .34
Call Waiting . . . . . . . . . . . . . . . . . . . .35
To record your own outgoing
message via the base . . . . . . . . . . . . .42
To record your own outgoing
message via the handset . . . . . . . . . .43
Check your outgoing message . . . . . .44
Select the outgoing message
answer mode . . . . . . . . . . . . . . . . . . .45
Re-instate the pre-recorded
outgoing message . . . . . . . . . . . . . . .46
Setting up the answering machine
Base display . . . . . . . . . . . . . . . . . . . .37
Switch the answering machine
ON/OFF using the base . . . . . . . . . . .38
Switch the answering machine
Using the answering machine
via the base
ON/OFF using the handset . . . . . . . . .38
Base loudspeaker volume . . . . . . . . . .39
Answer delay . . . . . . . . . . . . . . . . . . .39
To change the answer delay
Message playback . . . . . . . . . . . . . . .48
Call screening . . . . . . . . . . . . . . . . . .49
Using the answering machine
setting via the base unit . . . . . . . . . . .39
Check the answer delay setting . . . . . .40
To change the answer delay
setting via the handset . . . . . . . . . . . .40
Audible message alert . . . . . . . . . . . .41
To set audible message alert
via the handset
Message playback . . . . . . . . . . . . . . .50
Record a memo . . . . . . . . . . . . . . . . .51
Call screening . . . . . . . . . . . . . . . . . .52
Remote access
via the base . . . . . . . . . . . . . . . . . . . .41
To set audible message alert
Change the PIN code . . . . . . . . . . . . .53
Switch your answering
via the handset . . . . . . . . . . . . . . . . .41
Outgoing messages . . . . . . . . . . . . . .42
machine on remotely . . . . . . . . . . . . .53
To check for messages . . . . . . . . . . . .54
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
6
In this guide
Using additional handsets
Registering your handset . . . . . . . . . .56
Select a base . . . . . . . . . . . . . . . . . . .57
De-register a handset . . . . . . . . . . . . .58
Internal calls . . . . . . . . . . . . . . . . . . .58
Transferring calls . . . . . . . . . . . . . . . .58
3-Way Call . . . . . . . . . . . . . . . . . . . . .59
Help . . . . . . . . . . . . . . . . . . . . . . . . .60
General information
Safety . . . . . . . . . . . . . . . . . . . . . . . .65
Cleaning . . . . . . . . . . . . . . . . . . . . . .66
Environmental . . . . . . . . . . . . . . . . . .66
Guarantee . . . . . . . . . . . . . . . . . . . . .67
Returning your phone . . . . . . . . . . . . .69
How many telephones can
you have? . . . . . . . . . . . . . . . . . . . . .69
R&TTE . . . . . . . . . . . . . . . . . . . . . . .70
Declaration of Conformance . . . . . . . .71
Connecting to a switchboard . . . . . . . .72
Insert a pause . . . . . . . . . . . . . . . . . .72
Recall . . . . . . . . . . . . . . . . . . . . . . . .72
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Getting started
7
Location
WARNING
Do not place your BT Lyric 2500
in the bathroom or other humid
areas.
You need to place your BT Lyric 2500 within 2 metres of
the mains power socket and telephone socket so that the
cables will reach.
Handset range
The BT Lyric 2500 has a range of
300m outdoors when there is a
clear line of sight between the base
and the handset. When there is no
clear line of sight between the
handset and the base, e.g. the
base is indoors and the handsets is
either indoors or outdoors, the
range could be reduced to 50m.
Thick stone walls will severely
affect the range.
Make sure it is at least 2-3 metres away from other
electrical appliances to avoid interference.
Your BT Lyric 2500 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it
as high as possible ensures the best signal.
Signal strength
Setting up
The symbol on your handset
indicates when you are in range.
When you are out of range a beep
will sound every minute.
1. Pull down the small battery compartment cover and slide
off. Remove the back lens. Insert the 2 x AAA NiMH
batteries supplied.
IMPORTANT
Do not connect the telephone line
until your handset is fully charged.
The base station must be plugged
into the mains power at all times.
Back lens
Which socket?
Battery cover
Power socket
Telephone line socket
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
8
Getting started
The red Charging light stays on
even when the batteries are fully
charged.
2. Replace the back lens by fitting the top into the groove
on the handset. Whilst pressing down on the bottom of
the back lens, position the two lugs on the battery cover
so that they can slide up the grooves of the handset. It
will click into place.
Talk/Standby time
Under ideal conditions, fully
charged handset batteries should
give about 10 hours talk time or
100 hours standby time on a single
charge.
Back lens
BATTERY LOW WARNING
If the symbol is empty and
flashing, and you hear a warning
beep every 10 -15 seconds, you
will need to recharge your handset
before you can use it.
Lug
Lug
Battery performance
Battery
cover
To keep your batteries in the best
condition, leave the handset off
the base for a few hours at a time
(after the initial 16 hour charge).
3. Plug the mains power cord into the underside of the base
and into the mains power. The green Power/In use light
comes on.
New NiMH batteries do not reach
full capacity until they have been in
normal use for several days.
Running the batteries right down
at least once a week will help them
last as long as possible.
The charge capacity of
rechargeable batteries will reduce
with time as they wear out, so
reducing the talk/standby time of
the handset. Eventually they will
need to be replaced. New batteries
can be obtained from the BT Lyric
Helpline 0870 605 8047.
4. Place the handset on the base to charge for at least 16
hours. The red Charging light comes on. When the
handset is fully charged the display shows the symbol.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Getting started
9
5. After 16 hours, plug one end of the telephone line cord
into your BT Lyric 2500 base and the other end into the
telephone wall socket.
It is very important to set the day
as any messages left will announce
the day before playback.
Please note that the day is not
updated by Caller Display.
To set the day
1. Press
or
until the display shows Answer Settings
and press OK option button.
2. Press
or
until the display shows DaySettingand
press OK option button.
3. Display shows Sunday. Use
or
to scroll to the
correct day and press OK option button.
To set the time
1. Press
or
until the display shows HandsetSettings
and press OK option button.
2. Display shows TimeSetting. Press OK option button.
3. The first digit will be flashing. Enter the current time in
24 hour format, e.g. 08:24and press OK option button.
You will hear a confirmation beep.
4. Press and hold
to exit and return to standby.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
10
Getting to know your phone
Handset buttons
In use light
Red light illuminates when in use.
Option buttons
Let you select options shown on
the display, page 13.
Menu/Volume/Up and Down
Press to access and scroll through
the menu options, page 13.
Use to adjust the handset volume,
page 28.
Talk / Handsfree
Press to make or receive calls,
page 15.
Also used to switch
handsfree on and off, page 17.
End Call/Clear
Press to end a call, page 15.
Press and hold to exit the menu
and return to standby.
Keypad
Recall/Call Waiting/Intercom
For use with a switchboard/PBX
and BT Calling Features, page 72.
For use with Call Waiting, page 35.
Use to make internal calls, page 58.
Press to delete a character or digit
when pre-dialling or entering
directory information.
Redial/Pause
Use to redial any of the last 20
numbers called, page 21.
Press to enter a pause in a
number, page 72.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Getting to know your phone
11
Handset display icons – These are the symbols you will see on your handset’s screen.
Answering machine on
Battery level
Handsfree
Ext
Time
Range
09:30
Int
Handset name
Handset number
Lyric2500
02
HS1
02
Number of answering machine messages
Directory
Calls list
Keypad lock
Handset name
The handset name is displayed in standby mode.
Keypad lock
Displayed when the keypad is locked.
Lyric 2500
HS1
Handset number
The handset number is displayed in standby mode.
External
Ext
Displayed when an external call is being
received or in progress.
Battery levels
Shows handset battery status. Scrolls when the
handset is charging in the base.
Internal
Displayed when an internal call is being
received or in progress.
Int
Directory
Select icon to view the directory.
Handsfree
Displayed when in handsfree mode.
02
Calls list*
Flashes to indicate new Calls list entries.
When the icon flashes the number of new entries is
displayed above. When the icon is not flashing, the
total number of calls is displayed.
Answering machine
Displayed when answering machine is set to on.
Answering machine messages
Indicates the number of messages you have received.
02
Range
Displayed in standby mode to indicate handset
is in range of the base. Flashes if you go out
of range.
Secrecy (Displayed when on a call only)
The option to switch secrecy on.
Sec
*You must subscribe to your network provider’s Caller Display service for this feature to work.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
12
Getting to know your phone
Base
Microphone
To record memos or your
outgoing messages.
Page
Press to page handset(s),
see page 18. Also used
when registering
OGM
handsets, see page 56.
Press to hear your
current outgoing
message. Press and hold
to record your own
outgoing message.
Messages/LCD
Indicates the number of
messages you have on
the answering machine.
ᮣ
Skip
Ans On/Off
Switches the answering
machine on and off.
Lets you skip forward
through your messages
and memos.
Page
Use to set the answer
delay, see page 39
Volume + –
Use to adjust the
loudspeaker volume.
Messages
Del
Stop
Use to select your
Answer Only outgoing
message.
2
e
Delete
Deletes recorded
messages and memos.
ᮤ
Skip
Lets you skip backwards
through your messages
and memos.
Stop
To stop message
playback.
Use to switch the audible
message alert on or off.
Power/In Use light
(GREEN)
Flashes when the
handset is in use.
Charging light (RED)
Comes on when the
handset is charging
on the base.
Play
Use to select your
Answer and Record
outgoing message.
Lets you play and
pause your messages.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Getting to know your phone
13
Navigating the menus
Exit or go back one level in
the menu
Press
or press and hold
to standby.
to go back one level
Your BT Lyric 2500 has an easy to use menu system.
Each menu has a list of options, which you can see on
the menu map on the following page.
to return
When the handset is switched on and in standby:
If no buttons are pressed for 30
seconds, the handset reverts to
standby automatically.
Menu
1. Press to open the main menu then press
or
to
scroll to the menu option you want.
2. The
buttons below the display allow you to select
options within each menu.
Character map
The following table shows you where each letter and
Select the option displayed by
pressing the button underneath it.
punctuation character can be found. This will be helpful
when storing a name in the directory, see page 18.
Button
Upper
case
Lower
case
Button
Upper
case
Lower
case
@-1
@-1
PQRS7
TUV8
WXYZ9
,.*
pqrs7
ABC2
DEF3
GHI4
JKL5
MNO6
abc2
def3
ghi4
jkl5
tuv8
wxyz9
,.*
Space + & 0
#
Space + & 0
#
mno6
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
14
Getting to know your phone
Menu map
Answer off on
Record Memo
Answer Settings
Answer Mode
Outgoing Message
Day Setting
Answer Delay
Message Alert
Security Code
Handset Settings
Time Setting
Handset Ringer Volume
Handset Ringer Melody
Auto Answer
Handset Name
Language
Warning Tones
Base Settings
Base Ringer Volume
Base Ringer Melody
PIN Code
Dial Mode
Restore Settings
Registration
Register Base
Select Base
De-Register Handset
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using the phone
15
Press
digits.
to delete any incorrect
symbol on the display
Make an external call
1. Lift the handset and press
.
The
indicates when you are in range of
the base. If the symbol flashes and
you hear a warning beep, you are
out of range and will need to move
closer to the base.
The green In Use light on the base flashes and the
icon appears on the handset display whilst the red
In Use light also illuminates.
Ext
2. When you hear the dialling tone, dial the number
you want.
Call timer
Your handset will automatically
time the duration of all external
calls. The handset display shows
the call duration both during and
for a few seconds after your call.
Preparatory dialling
1. First enter the number to be dialled. The number
is shown on the display.
Press
to delete any incorrect
digits.
2. Press
to dial the number. The display
shows Dialling.
End a call
1. Press
Or
.
Place the handset back on the base.
Receive a call
Caller Display
If you have subscribed to your
network’s Caller Display service, the
caller’s number (or name if stored in
the directory) is displayed. See page
32 for more information.
When the phone rings ExternalCallis displayed.
1. If your handset is on the base, pick it up to answer
the call.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
16
Using the phone
Or
Auto answer
As long as you have auto answer
set to ON you can just pick the
handset up off the base to answer
the call. If you have switched it off,
If your handset is off the base, press
.
you will need to press the
Auto answer is the default setting.
.
Earpiece volume
During a call you can adjust the volume of the
earpiece/handset receiver.
If auto answer is set to off, you will
need to press
page 30.
at all times, see
1. Press
or
to increase or decrease the volume.
As you increase or decrease the volume, the boxes on
the display show the volume level.
Maximum volume
Mid volume
Minimum volume
Secrecy
During a call, you can talk to someone nearby without
your caller hearing.
1. Select Sec option.
Secrecy Onappears in the display and your caller is put
on hold and cannot hear you.
2. Select Off option again to return to your caller.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using the phone
17
Handsfree
Handsfree lets you talk to your caller without holding
the handset. It also enables other people in the room to
listen to your conversation over the loudspeaker.
Make a call in handsfree
During a handsfree call, press
or to change the volume.
1. Dial the number then press
2. Press again. The icon is displayed and you hear
your call over the loudspeaker.
.
To switch handsfree off and
return to the handset at any time,
press
.
3. Press
to end the call.
Answer a call in handsfree
When the phone rings:
1. Press
twice. The call is transferred to
the loudspeaker.
Switch to handsfree during a call
During a call:
1. Press
2. Press
. The call is transferred to the loudspeaker.
to end the call.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
18
Using the phone
Paging calls cannot be answered
by a handset.
Paging
You can alert a handset user that they are wanted or
locate a missing handset.
Page
1. Press
on the base. The handset(s) rings
to stop the paging ring
Page
The paging ring will stop
2. Press
Or
automatically after one minute
if no button is pressed and your
handset will return to standby.
Press any button on the handset.
Entering names
Use the keypad letters to enter
names, e.g. to store TOM:
100 Name and Number Directory
You can store up to 100 names and numbers in the
Directory. Names can be up to 13 characters long and
numbers up to 20 digits.
Press
Press
Press
once to enter T.
three times to enter O.
once to enter M.
Writing tips
Press
to delete the last
character or digit.
There is a character map on page 13 to help you when
entering names.
Use the middle option button to
toggle between upper and lower
case characters, i.e. A-a icon
inputs upper case letters and a-A
inputs lower case letters.
Store a name and number
Press
Use
to insert a space.
and for other
,
,
1. Select
option, then New option.
punctuation characters, see page 13
for full character map.
Enter Nameis displayed.
You MUST enter a name and a
number, otherwise the display will
show Errorand then return to the
number entry display.
2. Enter the name using the keypad.
3. Select OK option to confirm.
EnterNumber is displayed.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using the phone
19
4. Enter the telephone number. (Enter the full telephone
number including the dialling code if you subscribe to a
Caller Display service and want the name of your caller
displayed instead of the number.)
To enter a pause in a directory
number, press the LNR button.
For more information on pauses,
see page 72.
5. Select OK option to confirm.
6. The handset ringer melody options are displayed. Use the
The ringer melody option means
that when you receive a call from
a number stored in your directory
the ringtone you choose will be
played.
or
to scroll through the options. You will hear a
sample melody. Press Save to confirm the setting.
Display shows Entry Saved.
7. Press and hold
to exit and return to standby.
View and dial a name and number
1. Select
option.
The first directory entry is displayed.
If there are no entries stored Directory Emptywill be
displayed.
To search alphabetically
Press the relevant keypad button,
e.g. for TOM, press 8 then scroll
through the entries under T.
2. Use
or
to scroll and find the entry you want or
search alphabetically.
3. Press button to dial the displayed number.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
20
Using the phone
Edit a name and number
1. Select
option.
The first directory entry is displayed.
2. Use
or
to scroll and find the entry you want to
edit or search alphabetically.
3. Select Edit option.
EditNameand the name is displayed.
4. Press
new ones and select OK option to confirm.
Edit Numberis displayed.
to delete any incorrect characters, then enter
5. Press to delete any incorrect digits, then enter new
ones and select OK option to confirm.
6. The handset ringer melody options are displayed. Use the
or
to scroll through the options. You will hear a
sample melody. Press Save to confirm the setting.
Display shows EntrySaved.
7. Press and hold
to exit and return to standby.
Delete a name and number
1. Select
option.
The first directory entry is displayed.
2. Use
or
to scroll and find the entry you want or
search alphabetically.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using the phone
21
If you decide not to delete, select
Save option.
3. Select Del option. Delete Entry?is displayed.
4. Select Del option to confirm.
Entry Deletedis displayed and you hear a confirmation
beep.
5. Press and hold
to exit and return to standby.
Redial
The last 20 telephone numbers called are saved to a
redial list. You can then select any of the numbers to
redial, delete or copy to the directory.
If the number is stored in the
Directory and a name/number
match is found, the name will be
displayed instead.
Redial the last number called
LNR
1. Press
, wait for the dialling tone then press
.
You will not be able to copy a
number to the Directory if the
Directory is already full. If you try
to, the display will show
The last number you called is displayed and dialled.
Directory Full. You will need to
delete a number in the Directory
first, see page 20.
Redial a number from the redial list
LNR
1. Press
2. Use
number you want.
3. Press to redial.
. The last number called is displayed.
The copy option will not be
presented if the redial number
already appears in the directory.
or
to scroll through the redial list to the
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
22
Using the phone
Copy a number from the redial list to the directory
LNR
1. Press
. The last number called is displayed.
2. Use
or to scroll to the number you want then
select Copy option. EnterNameis displayed.
3. Enter a name using the keypad (as shown on page 17)
then select OK option.
EnterNumberis displayed.
4. Edit the number if you need to then select OK option
Press
to delete any unwanted
to confirm.
digits and then enter new ones.
5. The handset ringer melody options are displayed. Use the
or
to scroll through the options. You will hear a
sample melody. Press Save to confirm the setting.
Display shows EntrySaved.
6. Press and hold
to exit and return to standby.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using the phone
23
Delete a redial number
LNR
1. Press
. The last number called is displayed.
2. Use
or
to scroll to the number you want then
select Del option. Delete Entry?is displayed.
3. Select Del option to confirm.
If you decide not to delete, select
Save option.
Entry Deletedis displayed.
4. Press and hold
to exit and return to standby.
Delete all numbers from the redial list
LNR
1. Press
. The last number called is displayed.
2. Press and hold Del option for 3 seconds.
Delete Whole Redial List?is displayed.
3. Select Del option to confirm.
If you decide not to delete, select
Save option.
Redial List Deletedis displayed.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
24
Base settings
Base ringer volume
The base has 5 ringer volume settings: Offor 1to 4
.
The default setting is 4
1. Press or until BaseSettingsis displayed then
select OK option.
2. BaseRingerVolumeis displayed, select OK option.
.
You will hear a sample ring for all
settings (except off).
3. The current setting is highlighted. Press
highlight the volume you require.
or
to
4. Select OK option and you will hear a confirmation tone.
5. Press and hold
to exit and return to standby.
Base ringer melody
The base has 3 ringer melodies to choose from: 1
,
2
and 3
.
1. Press
or
until Base Settingsis displayed then
select OK option.
2. Press or
until BaseRingerMelodyis displayed
then select OK option.
You will hear a sample ring of each
melody on each button press.
3. The current melody is highlighted. Press
highlight the melody you want.
or
to
4. Select OK option and you will hear a confirmation tone.
5. Press and hold to exit and return to standby.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Base settings
25
Dial mode
Default (original setting) is Tone.
The available settings are tone and pulse.
1. Press
or
until BaseSettingsis displayed then
select OK option.
2. Press
or
until DialModeis displayed then select
OK option.
3. The current setting is highlighted. Press
highlight the dial mode you require.
or
to
4. Select OK option and you will hear a confirmation tone.
5. Press and hold to exit and return to standby.
Change the base PIN
Your BT Lyric 2500 has a base PIN code which you will
need to change some of the base settings. You may wish
to change this to prevent unauthorised changes to your
settings.
Default PIN is 0000
1. Press
or
until Base Settingsis displayed then
select OK option.
2. Press or
OK option.
until PIN codeis displayed then select
Please note that when ?is
displayed you must enter the digits
using the keypad before selecting
OK.
3. PIN code?is displayed. Enter your current 4 digit code
(default 0000) and select OK option.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
26
Base settings
4. New PIN?is displayed. Enter a new 4 digit code of your
choice and select OK option.
5. Confirm PIN?is displayed. Enter your new PIN code in
again and select OK option.
6. Press and hold
to exit and return to standby.
Restore default settings
Default settings
Earpiece Volume
3
4
You can restore your BT Lyric 2500 to its default (original)
settings. Please note this will delete your phonebook,
redial and calls list.
Handset and Base
Ringer Volume
Handset and Base
Ringer Melody
1
1. Press
or
until Base Settingsis displayed then
PIN code
0000
Lyric 2500
English
ON
select OK option.
Handset Name
Handset Language
Key Tones
2. Press or
until Restore Settingsis displayed,
then select OK option to confirm. PINcode?is displayed.
3. Enter your PIN code and press OK. The base resets first
announcing, “Answer on, calls will be answered after 6
rings”. During this reset, the handset display disappears
for a few seconds and then reverts to standby.
Low Battery Tone
Out of Range Tone
Auto Answer
ON
ON
ON
Dial Mode
Tone
Pause after
dialling line
3 Seconds
Empty
Phonebook
Redial List
Calls List
Empty
Empty
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Handset settings
27
Keypad lock
You can lock the keypad so that it cannot be used
accidentally while carrying it around.
To lock the keypad:
If you press any button while the
keypad lock is on, the display will
show PressUnlockthen
for 2 seconds and then returns
to standby.
1. Press
Unlock
then press and hold
. Display will show
.
To unlock the keypad:
IMPORTANT
Unlock
1. Press
then press
. The display will return to
If the keypad is locked you will
NOT be able to dial the emergency
numbers 999 and 112
standby.
Set the time
1. Press
or
until Handset Settingsis displayed
then select OK option.
If you subscribe to a Caller Display
Service from your network provider
the time will be set when you
receive your first call.
2. Time Settingis displayed, select OK option.
The first digit is highlighted.
3. Enter the current time in 24 hour format, e.g. 09:24,
then select OK option. You will hear a confirmation tone.
4. Press and hold
to exit and return to standby.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
28
Handset settings
Handset ringer volume
The handset has 5 ringer volume settings: Off and 1–4
where, 1=low and 4=high. The default setting is 4
.
1. Press or until Handset Settingsis displayed
then select OK option.
2. Press
or
until Handset RingerVolumeis
displayed then select OK option.
You will hear a sample ring for all
settings (except Off).
3. Use the
or
to choose between External Volume
or Internal Volume. Press OK.
4. The current setting is highlighted. Press
highlight the volume you require.
or
to
5. Select OK option and you will hear a confirmation tone.
6. Press and hold to exit and return to standby.
Handset ringer melody
The handset has 5 ringer melodies to choose from: 1
-5.
1. Press
or
until HandsetSettingsis displayed
then select OK option.
2. Press
or
until HandsetRingerMelodyis
You will hear a sample ring on each
button press.
displayed then select OK option.
3. Use the
or
to choose between ExternalMelody
or InternalMelody, press OK.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Handset settings
29
4. The current melody is highlighted. Press
highlight the melody you want.
or
to
5. Select OK option and you will hear a confirmation tone.
6. Press and hold to exit and return to standby.
Handset warning tones
Your BT Lyric 2500 allows you to set beeps/warning
tones to alert you to various situations.
You can set a confirmation beep to sound each time a
keypad button is pressed and you can set a warning beep
to sound when the batteries are low or when your
handset goes out of range.
1. Press
or
until Handset Settingsis displayed
then select OK option.
2. Press
or
to select either KeyTones, Battery
If you switch the handset key tones
off, you will not hear any
confirmation tones when altering
settings.
Low Toneor OutOfRangeTonethen select OK option.
3. The current setting is highlighted. Select either the Off
or Onoption and you will hear a confirmation tone.
5. Press and hold
to exit and return to standby.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
30
Handset settings
Auto answer
If you set Auto Answer to ON, when you receive an
incoming call and the handset is in the base, you
can pick it up to answer the call. You do not need to
press
.
1. Press
or
until HandsetSettingsis displayed
then select OK option.
2. Press
or
until Auto Answeris displayed then
select OK option.
3. Select either the Offor Onoption.
You will hear a confirmation tone.
4. Press and hold
to exit and return to standby.
Handset name
You can give your handset a name to personalise it. The
maximum number of characters is 10.
1. Press
or
until Handset Settingsis displayed
then select OK option.
2. Press
or
until Handset Nameis displayed then
select OK option.
3. Press
to delete unwanted characters and enter a
new name using the keypad.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Handset settings
31
4. Select OK option and you will hear a confirmation tone.
5. Press and hold
to exit and return to standby.
Handset language
You can change the language that is shown on your
handset display. The available languages include English,
Français, Deutsch, Italiano and Espanol.
1. Press
or
until Handset Settingsis displayed
then select OK option.
2. Press or until Languageis displayed then select
OK option.
3. Press or
4. Select OK option and you will hear a confirmation tone.
5. Press and hold to exit and return to standby.
to select the language you want.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
32
BT Calling Features
IMPORTANT
Caller Display
To use Caller Display you must first
subscribe to the service from your
network provider. A quarterly fee is
payable. Although a quarterly fee
is payable if BT is the network
provider, other provider’s may bill
differently. For more information
on BT Calling Features call BT free
on 0800 800 150.
If you have subscribed to a Caller Display Service, you
will be able to see your caller’s number on your handset
display (provided it is not withheld) prior to answering
the call.
If your caller’s name and number are stored in the
Directory and a name/number match is found, you will
see the caller’s name on the display instead.
It may take a couple of seconds for
the display to show the telephone
number or name for an incoming
call. The display will initially display
External Callfollowed by the
number.
Calls list
The Calls list holds up to 30 telephone numbers and they
are stored in the order they were received. The caller’s
details are stored in the Calls list whether you answered
the call or not. If a call is received when the list is full, the
oldest entry will be deleted automatically.
When a new call is received in the Calls list the
icon
will flash on the display and the calls counter shows how
many new calls you have received.
View and dial from the Calls list
1. Select
option.
The most recently received number or name is displayed.
Newis displayed when a call is new (has not yet been
viewed).
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
BT Calling Features
33
2. Use
or
to scroll through the list.
3. To dial a displayed number, press
.
The number will be dialled automatically and the display
will show Dialling.
Or, Press and hold
When all new calls have been viewed Newwill disappear
and the in standby will stop flashing. The standby
to exit and return to standby.
display will show the total number of calls in the list (a
maximum of 30).
Copy a Calls list number to the directory
1. Select
option. The most recently received number or
name will be shown.
2. Use or to scroll through the list to the number
you want.
See ‘Entering names’ and ‘Writing
tips’ on page 18.
3. Select Copy option, EnterNameis displayed.
4. Enter a name using the keypad, then select OK option.
5. EditNumberis displayed.
If you need to edit the number, use
to delete any unwanted digits,
then enter new ones.
6. Select OK option to confirm. Entry Savedis displayed.
7. The handset ringer melody options are displayed, use
the
or
to scroll through the options. You will hear
a sample melody, press Save to confirm the setting.
Display shows EntrySaved.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
34
BT Calling Features
8. Press and hold
to exit and return to standby.
Delete a Calls list number
1. Select
option. The most recently received number or
name will be shown.
2. Use or to scroll through the list to the number
you want.
3. Select Del option.
Delete Entry?Is displayed.
If you decide not to delete, select
Save option.
4. Select Del option again to confirm.
Entry Deletedis displayed and then the next entry in
the Calls list.
5. Press and hold
to exit and return to standby.
Delete the whole Calls list
1. Select option. The most recently received number or
name will be shown.
2. Select and hold Del option for 2 seconds.
Delete Whole Calls List?is displayed.
If you decide not to delete, select
Save option.
3. Select Del option again to confirm.
Calls List Deletedis displayed and then the
standby screen.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
BT Calling Features
35
Call Waiting
With Call Waiting, during a call, if another caller is trying
to reach you, you will hear a soft beep every 5 seconds.
If you have also subscribed to a Caller Display Service,
the caller’s number (or name if stored in the Directory)
will be shown on the display for 20 seconds, after this
time the display will return to your first caller’s details.
Instead of the engaged tone, the second caller will hear
an announcement to hold as you are aware that they are
waiting.
IMPORTANT
To use Call Waiting you must first
subscribe to the service from your
network provider.
A quarterly fee is payable.
For more information on BT Calling
Features call BT free on
0800 800 150.
To use Call Waiting
To answer the second call, without disconnecting from
your first caller:
The Call Waiting beep is not
audible to the person you are
speaking to.
R
1. Press
. The first caller will be put on hold.
R
2. Press
again to return to the first caller, and then press
it each time you want to switch between the two callers.
To disconnect the first call:
1. Press
to end the call with the first caller. The handset
will then ring.
2. Press again and continue your conversation with the
second caller.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
36
Setting up the answering machine
Your BT Lyric 2500 can digitally record up to 16 minutes
of messages, with each message lasting a maximum of
3 minutes. As well as recording incoming messages, you
can record memos for other users.
You can operate your answering machine from:
The base, see page 48.
The handset, see page 50.
Remotely, from any other TouchtoneTM telephone,
see page 53.
Your BT Lyric 2500 comes with two pre-recorded
outgoing messages, Answer and Record or Answer Only,
but if you wish you can record your own.
You will need to set the day and time (if you have not
already done so) so that you will know when each message
was received, see page 8.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Setting up the answering machine
37
Base display
The base display shows symbols relative to your
answering machine and the table below provides an
explanation of what these symbols mean.
Symbol
Definition
(Blank)
Power off.
C-0(flashing)
0-9
Day/Time needs to be set.
Answer-on mode, 0-9 messages.
C-0(flashing)
This appears intially to alert you to
set the day and time, i.e. when
first setting up the product or in
the event of a power loss.
9(flashing)
10-59 messages. Indicates when more than
9 messages are stored.
– alternating with 0-9 Power on, but set to answer off mode.
The display flashes between a dash and the
number of messages saved in the memory.
A(flashing)
E(flashing)
F(flashing)
P(flashing)
Handset menu or Remote access in use.
Error.
Memory full.
Message paused.
P-1: Alternating
between P& 1
When selecting or playing Answer & Record
outgoing message.
P-2: Alternating
between P& 2
When selecting or playing Answer Only
outgoing message.
r(flashing)
Message recording (memo, outgoing
message or incoming message).
tor 2to 9
Setting or reading answer delay.
Counting down.
8-0
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
38
Setting up the answering machine
If you have selected Answer Only
mode the caller will hear an
advisory announcement only, and
will not be able to leave a message,
see page 42.
Switch the answering machine ON/OFF
using the base
Ans
On/Off
1. Press and release
to switch ON or OFF.
If you hear “Answer on, your outgoing message is....”
the answering machine is switched on and is ready to
answer incoming calls and record any messages.
The display on the base shows the number of messages
stored in the memory.
If you hear “Answer off” the answering machine is
switched off.
The display on the base unit will flash between a dash
and the number of messages saved in the memory.
Switch the answering machine ON/OFF
using the handset
1. Press
or
until display shows AnswerOffOn. The
current status is highlighted.
The only option available is to
toggle the setting, i.e. if the
machine is set to Answer on you
can only change to Answer off and
this change of setting only will be
announced.
2. If you want to change the status, press either the OFF or
ON option button. Your chosen setting will be
announced and the display will return to standby.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Setting up the answering machine
39
Base loudspeaker volume
You can adjust the base loudspeaker volume from 0
(volume off) to 9, plus H (maximum volume).
The default level is 5.
1. Press
to increase the volume or to decrease
the volume.
If you adjust the volume when the answering machine is
not being used, a beep sounds at each press. When the
volume reaches its highest or lowest levels two beeps will
sound.
Answer delay
Answer delay sets the number of times your BT Lyric 2500
will ring before the answer machine picks up your call and
starts playing the outgoing message.
You can change this setting to between 2-9 rings or
time saver(t).
For more information on Time
Saver setting, see page 53.
The default setting is 6 rings.
To change the answer delay setting via the base unit
Time Saver is displayed on the
base unit as t and on the handset
as TS.
Skip
ᮣ
1. Press and hold
until the current setting is announced,
then release.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
40
Setting up the answering machine
Skip
ᮣ
2. Press and release
to scroll through the settings,
until you reach the setting you want. With each press the
option will be announced and shown on the base display.
When you hear the setting you want, do not press the
Skip
ᮣ
button again. After a short delay your chosen setting
will be announced to confirm i.e. “Calls will be answered
after 6 rings”.
Check the answer delay setting
Skip
ᮣ
1. Press and release
. The current setting will be
announced and shown on the display.
To change the answer delay setting via the handset
1. Press
or
until display shows AnswerSettings
and press OK option button.
2. Press
or
until display shows AnswerDelayand
press OK option button.
3. Current setting is highlighted. Use
or
button to
highlight setting required between 2 and 9 or TS and
press OK option button.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Setting up the answering machine
41
Audible message alert
When you have new messages, with the audible message
alert switched on, you will hear a beep every 10 seconds.
The default setting is OFF.
The message alert beep is at
the volume you have set for the
loudspeaker.
With the answering machine ON and in standby mode:
To set audible message alert via the base
Skip
ᮣ
1. Press and hold
to change the setting.
The prompt will announce ‘Message alert on/off’ as
appropriate.
To set audible message alert via the handset
1. Press
or
until display shows AnswerSettings
and press OK option button.
2. Press
or
until display shows MessageAlertand
press OK option button.
3. Current setting is highlighted. Press ON option button to
switch ON or press OFF option button to switch OFF.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
42
Setting up the answering machine
Answer and Record
Outgoing messages
The pre-set Answer and Record
outgoing message, that allows
your caller to leave a message, is
“Hello, your call cannot be taken
at the moment, so please leave
your message after the tone”.
The outgoing message is the message a caller first hears
when the answering machine picks up their call. There
are 2 pre-recorded outgoing messages to choose from
(see note opposite) or you can record your own.
Answer Only
The pre-set Answer Only outgoing
message, where callers hear an
announcement but cannot leave a
message, is “Hello, your call
cannot be taken at the moment
and you cannot leave a message,
so please call later”.
Record your own outgoing message
Your Answer and Record outgoing message can be up to
3 minutes long and will replace the pre-recorded message.
Your Answer Only message can be up to 16 minutes long
(maximum recording length) and will replace the
pre-recorded message. However, you should try to keep
your message short to allow time for recording memos, or
incoming messages when using Answer and Record mode.
When recording your Answer Only
message, remember to advise your
caller that they will not be able to
leave a message.
To reinstate the pre-recorded
message, see page 46.
To record your own outgoing message via the base
Firstly, you need to set the answer mode for the outgoing
message you want to record.
Ans
On/Off
1. Press and hold
until you hear, “Please select outgoing
message” then release the button.
Skip
ᮣ
2. To select Answer and Record, press and release
.
Or
Skip
ᮣ
To select Answer Only, press and release
.
Your chosen message will be announced.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Setting up the answering machine
43
OGM
3. Press and hold
. You will hear, “Please speak after the
tone. To end recording release the button”.
4. After the tone, speak your message and then release
OGM
the
button when you have finished.
5. Your message will then be played back to you.
To record your own Answer and Record outgoing
message via the handset
1. Lift the handset.
2. Press
press OK.
or
until display shows AnswerSettingsand
3. Press
or
until display shows OutgoingMessage
and press OK option button.
4. Display shows AnswerandRecord. Press OK option
button.
5. Display shows OutgoingMessagetogether with options
Newand Playand you will hear your Answer and Record
outgoing message via the handset.
6. Press the NEW option button. You will hear, “Please speak
after the tone. To end recording press hash”.
7. After the tone, speak your message clearly into the handset.
Press
to end recording. The prompt will announce,
“Your outgoing message is”, and your message will be
played back to you.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
44
Setting up the answering machine
To record your own Answer Only outgoing message
via the handset
1. Press or until display shows AnswerSettingsand
press OK option button.
2. Display shows AnswerMode. Press
or
until display
shows OutgoingMessageand press OK option button.
3. Use or to scroll to AnswerOnlyand press OK
option button.
When recording your own Answer
Only outgoing message, please
remember not to invite your caller
to leave a message as the
Answer Only mode will not record
incoming messages.
4. Display shows OutgoingMessageand you will hear your
Answer Only outgoing message via the handset.
5. Press the NEW option button. You will hear, “Please speak
after the tone. To end recording press hash”.
6. After the tone, speak your message clearly into the handset.
Press
to end recording. The prompt will announce,
“Your outgoing message is”, and your message will be
played back to you.
Check your outgoing message
Via the base:
OGM
1
Press
.
You will hear either:
“Answer on, your outgoing message is...” followed by your
selected outgoing message.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Setting up the answering machine
45
Or
“Answer off”.
The base display will show Pflashing, alternating with
the number of the currently selected outgoing message
(
1= Answer and Record and 2= Answer Only).
Via the handset:
1. Press or until display shows AnswerSettings
and press OK option button.
2. Display shows AnswerMode. Press
or
until
display shows OutgoingMessageand press OK option
button.
3. Use
or
to display either: AnswerandRecordor
AnswerOnlyand press OK option button.
4. Display shows OutgoingMessageand the prompt will
announce, “Your outgoing message is” , and your message
will be played back to you.
Select the outgoing message answer mode
Via the base:
Ans
On/Off
1. Press and hold
until you hear, “Please select outgoing
message” then release the button.
Skip
ᮣ
2. To select Answer and Record, press and release
.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
46
Setting up the answering machine
Or
Skip
ᮣ
To select Answer Only, press and release
.
Your chosen message will be announced over the base
speaker.
Via the handset:
1. Press
or
until display shows AnswerSettingsand
press OK option button.
2. Press
or
until display shows AnswerModeand
press OK option button.
3. Use
or
to display either: AnswerandRecordor
AnswerOnlyand press OK option button.
The prompt will announce your chosen outgoing
message via the handset.
Re-instate the pre-recorded outgoing message
You can delete your own outgoing message and return to
the pre-recorded outgoing message.
Via the handset:
1. Lift the handset.
2. Press
or
until display shows AnswerSettingsand
press OK option button.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Setting up the answering machine
47
3. Press
or
until display shows OutgoingMessage
and press OK option button.
4. Use
or
to select either: AnswerandRecordor
AnswerOnlyand press OK option button.
5. Display shows OutgoingMessagewith options of DEL
,
NEW and PLAY.Press DEL to immediately delete your
own outgoing message and reinstate the default, or NEW
to record a new outgoing message, or PLAY to hear the
current outgoing message.
During playback the outgoing message may be deleted.
Press DEL option button during message playback. The
prompt will announce, “Your outgoing message is”, and
the original pre-recorded outgoing message is played.
Via the base:
1. Select the outgoing message you want to delete as
described on page 45.
2. Whilst your selected outgoing message is playing,
Del
press
on the base unit. The message will stop playing,
you will hear a short beep and then the default pre-
recorded outgoing message.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
48
Using the answering machine via the base
Message playback
Play
Stop
1
Press
. You will hear, “You have (n) messages”.
Press
at any time to stop
playback.
Your message(s) begin to play back, starting with the
first message received. Both new and old messages will
be played.
At the start of each message, the number of the message
is announced and displayed on the base.
During playback:
Play
Press
, to pause a message, Pwill flash in the display
and you will hear a beep every 10 seconds.
Play
Press
Press
again to resume playback.
Skip
ᮣ
to play the next message.
Skip
to play the next message at 11/2 times
ᮣ
Press and hold
the speed (fast playback).
Skip
ᮣ
Press
Press
Press
once to repeat the current message.
Skip
ᮣ
twice to play the previous message.
Del
If you select a message to be
to delete the current message.
deleted, it will be deleted at the
end of playback after the 8 second
countdown and confirmation tone.
You will hear, “Message deleted”.
If you decide not to delete, press
Stop
during the countdown.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using the answering machine via the base
49
At the end of playback:
You will hear “End of messages. To delete all messages,
press delete”. You then have 8 seconds in which you can:
Del
Press
to delete all messages, you will hear
“All messages deleted”.
Or
Stop
Press
to cancel message deletion. This will save any
messages you have selected individually for deletion.
Any messages not deleted will be saved.
You will hear a beep to confirm when 8 seconds has
elapsed.
Call screening
When the answering machine is on and takes a call, you
can use the loudspeaker to listen to the caller leaving
a message. You can then identify the caller and decide
whether to take the call in person.
Make sure the volume on the base
is set to an audible level,
see page 39.
1. Press
interrupt and speak to the caller.
Recording will stop automatically.
, or lift the handset off the base, if you want to
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
50
Using the answering machine via the handset
You can use your BT Lyric 2500 for a variety of functions:
to listen to your messages; delete, skip forward or
backward; record a memo or new outgoing message,
and to screen incoming calls.
Message playback
1. Press the
option button.
The display will show PlayMessagesand the number
of new messages and the number of total messages
(old and new).
2. To play new message only:
Press NEW option button.
Your new messages will be played.
To play all messages (old and new):
Press ALL option button.
All your messages will be played in the order they were
received.
During playback:
|<<
|<<
If you select a message to be
Press
Press
Press
Press
once to repeat the current message.
twice to play the previous message.
to delete the current message.
to play the next message.
deleted, it will be deleted at the
end of playback after the 8 second
countdown and confirmation tone.
DEL
>>|
If you decide not to delete, press
SAVE option button during the
countdown.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using the answering machine via the handset
51
At the end of playback:
You will hear “End of messages. To delete all messages
press delete”. Display shows Endofmessagesand counts
down from 8
-0.
Press DEL option button during the countdown to delete
all messages.
If you do not want to delete messages, press the SAVE
option button.
Record a memo
You can record a memo message for another user of your
BT Lyric 2500. Your memo can be up to 12 minutes
(maximum recording time), but you should try to keep it
short to leave space for other messages.
1. Pick up the handset. Press
or
until display shows
RecordMemoand press OK option button.
2. You will hear “Please speak after the tone.
To end recording press hash”.
3. After the beep, speak your memo clearly into the handset.
While recording, the display will show ToEndRecording
Press
#.
4. Press
to end recording.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
52
Using the answering machine via the handset
5. The display will return to the standby screen.
Your memo is now stored and can be played back in the
same way as incoming messages.
Call screening
Make sure the volume on the base
is set to an audible level,
see page 39.
When the answering machine is on and takes a call, you
can use the loudspeaker to listen to the caller leaving
a message. You can then identify the caller and decide
whether to take the call in person.
To screen a call via the handset
(when the handset is off the base)
You can adjust the Call Screening
1. When your BT Lyric 2500 rings, press the SCREEN
option button. You can hear your caller begin to leave a
message. Display shows Screeningand Talkabove the
right hand option button.
volume using the
or
button.
2. If you want to interrupt and speak to the caller press
Recording will stop automatically
.
3. If you want to end Call Screening and let the answering
machine take the call and finish recording the message,
press
.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Remote access
53
You can operate your answering machine from any
TouchtoneTM phone by calling your BT Lyric 2500 and
entering a 3 digit security PIN.
Using a PIN code prevents other people from accessing
your machine without permission.
IMPORTANT
You should change the security PIN
from the original setting of 000.
It is advisable to make a note of
your new PIN code and keep it
somewhere safe.
Change the remote access PIN code via the handset
1. Press
or
until the display shows AnswerSettings
and press OK option button.
Time saver
When you ring in to access your
messages remotely, if your
answering machine is set to time
saver and you have new messages
it will answer after 2 rings, if you
do not have any new messages, it
will answer after 6 rings. This means
you can hang up after 3 rings
knowing you have no new
2. Press until the display shows SecurityCodeand
press OK option button.
3. Display shows current PIN code (default 000) and you
hear, “Please enter new security code”. Enter a 3-digit PIN
code of your choice and press OK option button.
4. Your PIN code is announced.
messages, saving you time and the
cost of the call.
5. Press and hold
to exit and return to standby.
You cannot use this feature if you
have BT Answer 1571 or Call
Minder active as the call will be
intercepted before the 20 rings.
Switch your answering machine on remotely
If you forget to switch your answering machine on, you
can do it remotely from another phone.
Your handset will automatically
return to standby if no button is
pressed for 8 seconds or more.
1. Dial your telephone number and let it ring.
After 20 rings you will hear your outgoing message.
If you have any new messages they
will be played after you have
entered your security PIN code.
2. Press
, then enter your security code.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
54
Remote access
3. Press
within 8 seconds. You will hear “Answer On”
and your answering machine will switch on ready to
answer incoming calls.
If you enter the incorrect PIN code
you will be allowed one further
attempt, if it is still incorrect you
will hear “Thank you for calling”
and your BT Lyric 2500 will hang
up.
To check for messages
1
2
Dial your phone number. When you hear your outgoing
If no button is pressed for 8 seconds
or more your BT Lyric 2500 will
hang up.
message, press
. You will hear, “Please enter your
security code”.
Enter your 3 digit code. You will hear, “You have ‘n’ new
messages” and they will be played back.
If you have no new messages, you will hear, “You have no
new messages, to hear main menu press 1”.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Remote access
55
Operating your answering machine remotely
When you have accessed your answering machine
messages, you can press
main menu options.
to hear the remote access
Simply follow the instructions you hear:
“To play all messages press 2”.
“To play new messages press 3”.
“To skip back during messages press 4”.
“To delete during messages press 5”.
“To skip forward during messages press 6’”.
“To set answer on or off press 7”.
“To hear the outgoing message menu press 8”.
“To set a new security code press 9”.
“To hear main menu again press 1”.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
56
Using additional handsets
You can use up to five BT Lyric 2000 additional handsets
with your BT Lyric 2500 to extend your phone system
without needing to install extension sockets for each new
phone.
Your BT Lyric 2500 handset can also be registered to
up to 3 other bases. You can then select the base you
would prefer to use.
Each additional handset is supplied with its own charger
and user guide, but the following information will tell you
how to register and use an additional handset with your
BT Lyric 2500.
You must charge your additional
handset for 24 hours before
registering it.
Registering your handset
At the base:
You must register your BT Lyric
2000 additional handset before it
can be used with your BT Lyric
2500 base.
Page
1. Press and hold
for 10 seconds, until you hear a
beep, then release it.
At the handset:
2. Press
or
until Registrationis displayed, then
select OK option.
3. Press or
until Register Baseis displayed, then
select OK option. Base1 2 3 4is displayed.
4. Use the keypad to select a base (1-4) which will be
highlighted. Press OK option to confirm. PIN Code?
is displayed.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using additional handsets
57
Default PIN is 0000.
5. Enter your 4 digit PIN.
The display shows, e.g. Search2(for base 2).
When the base is located, your handset display will be
updated with the handset number for the selected base.
Select a base
If your BT Lyric 2500 handset is registered to more than
one base, you can select which base to use. Alternatively,
if you select Autoyour handset will automatically select
the base with the best reception.
1. Press
or
until Registrationis displayed, then
select OK option.
2. Press
or
until Select Baseis displayed, then
select OK option.
3. Press
or
to select a base (1
–
4or Auto) then
select OK option.
4. Press and hold
to exit and return to standby.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
58
Using additional handsets
You cannot de-register the handset
you are using.
De-register a handset
1. Press
or
until Registrationis displayed, then
select OK option.
2. Press
or
until De-Register Handsetis displayed,
then select OK option. PIN Code?is displayed.
3. Enter your 4 digit PIN, then select OK option.
4. Select a handset (1-5) using the keypad then select OK
to confirm. Once de-registered the display will show
HandsetNotRegistered.
Internal calls
If you have more than one handset registered to the
base, you can make internal calls between handsets.
1. Press Int Internal Callto Handsetis displayed.
2. Press the handset number (1-5) you want to call then
press OK.
3. Press
to end the call.
If you want to cancel the call
transfer, press
.
Transferring calls
You can transfer an external call to another handset
registered to the base.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Using additional handsets
59
During your call:
R
1. Press and hold
. Your external caller will be put on
Where X is the number of the
other handset.
hold and will hear a tone. TransferTo Handset
is
displayed.
2. Enter the handset number that you want to transfer the
call to and then press OK. The called handset will ring and
the display shows InternalCallHandsetX.
At the called handset, the user can press
to answer
the call. The Lyric users can then talk to each other and
the original handset can be cleared down leaving the
external caller connected to the second handset.
If the call is not answered within 100 seconds the original
handset will ring.
3-Way Call
The caller should be advised that they will be put on hold.
R
1. Press and hold
. Your external caller will be put on
hold. Transfer To Handsetis displayed.
2. Enter the internal handset number that you want to hold
the 3-way call with, then select OK option.
3. When the internal handset user answers, select Con option
to begin the 3-way call.
4. Press
to finish the 3-way call.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
60
Help
New batteries should be
Replacing the handset batteries
After a time, you may find that the handset batteries are
running out of charge more quickly. This is a standard
sign of wear and the batteries will need replacing.
rechargeable: Nickel Metal Hydride
(NiMH), size AAA, capacity
600mAh.
Spare rechargeable batteries are
available from the BT Lyric Helpline
0870 605 8047.
1. Pull down the small battery compartment cover and slide
off. Remove the back lens.
WARNING
Do not immerse batteries in water
or throw them into a fire, or
dispose of them with ordinary
domestic refuse.
2. Take out the old batteries and replace with 2 new ones,
then replace the battery compartment cover and back lens.
BT accepts no responsibility for
damage caused to your BT Lyric
2500 by using any other types of
batteries.
General
Phone does not work
Have you installed the batteries correctly? see page 7.
Check that the mains power is correctly connected.
No dial tone
Is the telephone cord of the base plugged into the
phone socket?
Check that the mains power is correctly connected.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Help
61
Cannot dial out or receive calls
Check that the mains power is correctly connected.
The batteries may need recharging.
Has there been a power cut? If so, place the handset
back on the base for 10 seconds and try again. If it still
does not work disconnect the batteries and mains power
for 10 minutes, then reconnect and try again.
You have a dial tone, but the phone will not dial out
You may need to change the dial mode from tone to
pulse, see page 25.
If you are connected to a switchboard, check whether
you need to dial an access code.
Handset does not ring
The ringer volume may be switched off, see page 28.
Check that the mains power is correctly connected.
Make sure the handset is registered to the base, see
page 56.
No display
The batteries may be flat, dead or incorrectly inserted.
Recharge or replace the batteries.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
62
Help
icon flashes
Is the handset registered correctly to the base, see
page 56.
Check that the mains power is correctly connected.
Check that the handset is within range of the base.
icon flashes
The batteries are low, place the handset on the base
to recharge.
icon not scrolling
Try cleaning the charging contacts.
Check that the mains power is correctly connected.
You hear the busy tone when you press
Make sure the handset is in range of the base.
Another handset may be in use.
No Caller Display number/name displayed
Have you subscribed to a Caller Display service from your
network provider, see page 32.
The caller may have withheld their number.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Help
63
An exact name/number match was not found in your
Directory. Check that you have stored the full STD
dialling code.
Cannot register a handset to a base
You can register a total of 5 handsets to your BT Lyric
2500 base and you can register your BT Lyric 2500
handset to up to 4 bases. Check that you have not
exceeded the limits.
Check that you have entered the correct PIN number
(default PIN 0000). See page 25.
Check that you are at least one metre away from other
electrical equipment to avoid interference when
registering.
Base unit does not ring, but the lights are on
Have you connected the telephone line correctly?
Is the base ringer set to off?
You may have a faulty line or socket. Try using another
socket or line. Call BT on 151 if you still experience
problems.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
64
Help
Base charging light not working
Try cleaning the charging contacts on the base.
Check that the mains power is correctly connected.
Buzzing noise on my phone or on other electrical
equipment nearby
Sometimes your BT Lyric 2500 can interfere with other
electrical equipment if it is placed too close. It is
recommended that you place your BT Lyric 2500 at least
one metre away from electrical appliances or metal
obstructions to avoid any risk of interference.
Answering machine does not record any messages
The memory may be full. Play and delete old messages,
see page 48 or 50.
Answering machine messages have the wrong
date and time
Have you set the date and time? See page 8.
Cannot access your messages from another phone
Have you changed the remote access security PIN code?
See page 53. Always keep a note of the new PIN code in
a safe place.
Customer Helpline
If you are still experiencing
difficulties please call the BT Lyric
Helpline on 0870 605 8407.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
General information
65
Safety
IMPORTANT
This equipment is not designed for
making emergency telephone calls
when the power fails. Alternative
arrangements should be made for
access to emergency services.
Only use the power supply included with the product.
Using an unauthorised power supply will invalidate your
guarantee and may damage the telephone. The item
number for the mains power supply used with the base is
022072. If you have purchased a BT Lyric 2500 multiple
pack, the item code for the charger mains power supply
is 021299.
This product is intended for
connection to analogue public
switched telephone networks and
private switchboards in the United
Kingdom.
Use only the approved rechargeable batteries supplied.
Spare rechargeable batteries are available from the
BT Lyric Helpline on 0870 605 8047.
Do not open the handset (except to replace the handset
batteries) or the base. This could expose you to high
voltages or other risks. Contact the Helpline on 0870
605 8047 for all repairs.
Radio signal transmitted between the handset and base
may cause interference to hearing aids.
It is recommended that advice from a qualified expert
be sought before using this product in the vicinity of
emergency/intensive care medical equipment.
It is recommended that if you have a pacemaker fitted
you check with a medical expert before using this
product.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
66
General information
Your product may interfere with other electrical
equipment, e.g. TV and radio sets, clock/alarms and
computers if placed too close. It is recommended that
you place your product at least one metre away from
such appliances to minimise any risk of interference.
Never dispose of batteries in a fire. There is a serious risk
of explosion and/or the release of highly toxic chemicals.
Cleaning
Clean the handset and base with a damp (not wet) cloth,
or an anti-static wipe. Never use household polish as this
will damage the product. Never use a dry cloth as this
may cause a static shock.
Environmental
Do not expose to direct sunlight.
The product may heat up when the batteries are being
recharged or during prolonged periods of use. This is
normal. However, we recommend that to avoid damage
you do not place the product on antique/veneered wood.
Do not stand your product on carpets or other surfaces
which generate fibres, or place it in locations preventing
the free flow of air over its surface.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
General information
67
Do not submerge any part of your product in water and
do not use it in damp or humid conditions, such as
bathrooms.
Do not expose your product to fire, explosive or other
hazardous conditions.
There is a slight chance that your phone could be
damaged by an electrical storm. We recommend that
you unplug the power and telephone line cord from the
base for the duration of the storm.
Guarantee
Your BT Lyric 2500 is guaranteed for a period of 12 months
from the date of purchase.
Subject to the terms listed below, the guarantee will
provide for the repair of, or at BT’s or its agent’s
discretion, the option to replace the BT Lyric 2500 or
any component thereof, (other than batteries), which is
identified as faulty or below standard, or as a result of
inferior workmanship or materials. Products over 28 days
old from the date of purchase may be replaced with a
refurbished or repaired product.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
68
General information
The conditions of this guarantee are:
The guarantee shall only apply to defects that occur
within the 12 month guarantee period.
Proof of purchase is provided.
The equipment is returned to BT or its agent as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear, neglect,
tampering with the equipment, or any attempt at
adjustment or repair other than through approved agents.
This guarantee does not affect your statutory rights.
Within the 12 month guarantee period:
Prior to returning your product, please read the Help
section beginning on page 60 or contact the Helpline on
0870 605 8047 for assistance. In the unlikely event of a
defect occurring, please follow the Helpline’s instructions
for replacement or repair.
Outside of the 12 month guarantee period:
If your product needs repair after the guarantee period
has ended, the repair must meet the approval
requirements for connection to the telephone network.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
General information
69
We recommend that you contact BT’s approved repair
agent TecLogic on 01672 564444 or a local qualified
repairer.
Returning your phone
If the Helpline is unable to remedy your problem they
will ask you to return the product. Where possible, pack
the product in its original packaging. Please remember
to include all parts, including the line cords, power
supply units and the original batteries. (Please note that
we cannot take responsibility for goods damaged in
transit.) Please obtain and keep proof of posting from
the Post Office.
Technical information
How many telephones can I have?
All items of telephone equipment have a Ringer
Equivalence Number (REN), which is used to calculate
the number of items which may be connected to any
one telephone line. Your BT Lyric 2500 has a REN of 1.
A total REN of 4 is allowed. If the total REN of 4 is
exceeded, the telephones may not ring. With different
telephone types there is no guarantee of ringing, even
when the REN is less than 4.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
70
General information
Any additional handsets and chargers that you register
have a REN of 0.
For your records
Only use approved base mains power supply, item code:
022072.
Date of purchase:
If you have purchased a BT Lyric 2500 multiple pack, the
item code for the charger mains power supply is 021299.
Place of purchase:
Serial number:
Only use approved batteries.
These products are available from the BT Lyric 2500
Helpline 0870 605 8047.
For guarantee purposes proof of
purchase is required so please
keep your receipt.
R&TTE
Enter your base PIN here:
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
(
_
/
_
/
_
/
_
)
This equipment complies with the essential requirements
for the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC.
Enter your remote access code
here:
(
_
/
_
/
_
)
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
General information
71
Declaration of Conformance
Hereby, Suncorp Technologies declares that this BT Lyric
2500 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
The Declaration of Conformance for the BT Lyric 2500 is
published on the website:
BT accessories and
replacement items
For a full range of accessories and
replacement items for BT products
please call 0870 240 5522, or
visit:
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
72
General information
Connecting to a switchboard
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards, which support tone and pulse
dialling and timed break recall.
If in doubt please consult your service provider.
Inserting a pause
A pause would normally be used
when storing a telephone number
in the directory or inserted when
pre-dialling.
With some switchboards, after dialling the access code
you may have to wait for a moment while the
switchboard picks up an outside line so you will need to
enter a pause in the dialling sequence.
LNR
Press
to insert a pause (P) before entering the
telephone number.
You may also need to enter a pause when storing
international numbers or charge card numbers.
Recall
You may need to use the recall function if you are
connected to a switchboard/PBX (Private Branch
Exchange), contact your PBX supplier for further
information. The recall function is set to timed break
recall and is also used for BT Calling Feature.
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of
contract. Nothing in this publication forms any part of any contract.
© British Telecommunications plc 2004.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
BT Lyric 2500 Issue 1 (07/04) 2
Designed and produced by The Art & Design Partnership Ltd.
Printed in China.
|