P8H77-M LE
Contents
iii
Contents
iv
Contents
v
Safety information
Electrical safety
•
To prevent electric shock hazard, disconnect the power cable from the electric outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
•
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, ensure that all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
•
•
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports.
•
Chapter 2: BIOS information
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
vi
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
Typography
Bold text
Italics
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1>+<Key2>+<Key3>
If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
Example: <Ctrl>+<Alt>+<D>
vii
P8H77-M LE specifications summary
CPU
LGA1155 socket for Intel® 3rd/2nd Generation Core™ i7 /
Core™ i5 / Core™ i3 / Pentium® / Celeron® Processors
Supports Intel 22/32nm CPU
Supports Intel® Turbo Boost Technology 2.0
* The Intel® Turbo Boost Technology 2.0 support depends on the
CPU types.
Chipset
Memory
Intel® H77 Express Chipset
2 x DIMM, max. 16GB*, DDR3 1600 / 1333 / 1066 MHz, non-ECC,
un-buffered memory
Dual-channel memory architecture
*
Vendors List).
** When you install a total memory of 4GB capacity or more,
Windows® 32-bit operating system may only recognize less
than 3GB. We recommend a maximum of 3GB system memory
if you are using a Windows® 32-bit operating system.
Graphics
Integrated graphics processor
Multi-VGA output support: HDMI, DVI-D, and D-Sub ports
Supports HDMI with max.resolution of 1920 x 1200 @60Hz
Supports DVI with max.resolution of 1920 x 1200 @60Hz
Supports D-Sub with max. resolution of 2048 x 1536 @75Hz
Expansion slots
1 x PCI Express 3.0* x16 slot
1 x PCI Express 2.0 x4 slot
1 x PCI Express 2.0 x1 slot
1 x PCI slot
*
PCIe 3.0 speed is supported by Intel® 3rd generation Core™ processors.
Storage
Intel® H77 Express Chipset:
-
-
4 x Serial ATA 3.0 Gb/s connectors (blue)
2 x Serial ATA 6.0 Gb/s connectors (gray)
Realtek® RTL8111F PCIe Gigabit LAN controller
LAN
Audio
Realtek® ALC887 8-channel* High Definition Audio CODEC
-
Supports Jack-Detection, Multi-streaming, and Front Panel
Jack-Retasking
*
Use a chassis with HD audio module in the front panel to
support an 8-channel audio output.
USB
Intel® H77 Express Chipset:
-
4 x USB 3.0 ports (2 ports at midboard, 2 ports at back panel)
support ASUS USB 3.0 Boost Turbo Mode and UASP Mode*
-
10 x USB 2.0 ports (6 ports at midboard, 4 ports at back
panel)
*
The USB 3.0 ports only support Windows® 7 or later versions.
UASP standard only supports Windows® 8.
(continued on the next page)
viii
P8H77-M LE specifications summary
ASUS unique features ASUS DIGI+ VRM
ASUS EPU
ASUS MemOK!
GPU Boost
ASUS AI Suite II
ASUS Anti-Surge Protection
ASUS UEFI BIOS featuring graphics user interface
ASUS CrashFree BIOS 3
ASUS EZ Flash 2
ASUS MyLogo 2™
ASUS Q-Fan 2
100% All High-quality Conductive Polymer Capacitors
Rear panel ports
1 x PS/2 keyboard / mouse combo port
1 x HDMI port
1 x DVI-D port
1 x D-Sub port
1 x LAN (RJ-45) port
4 x USB 2.0 ports
2 x USB 3.0 ports (blue)
3 x Audio jacks
Internal connectors/
switches/ buttons
1 x USB 3.0 connector supports additional 2 USB 3.0 ports
3 x USB 2.0 connectors support additional 6 USB 2.0 ports
4 x SATA 3.0 Gb/s connectors (blue)
2 x SATA 6.0 Gb/s connectors (gray)
1 x CPU fan connector
1 x Chassis fan connector
1 x Chassis intrusion connector
1 x Front panel audio connector (AAFP)
1 x S/PDIF output connector
1 x System panel connector
1 x Speaker connector
1 x 24-pin ATX power connector
1 x 8-pin EATX 12V power connector
1 x MemOK! button
1 x Clear CMOS jumper
BIOS features
64 Mb Flash ROM, UEFI BIOS, PnP, DMI v2.0, WfM 2.0,
ACPI v2.0a, SM BIOS v2.5, Multi-language BIOS, ASUS
CrashFree BIOS 3, ASUS EZ Flash 2
Manageability
Accessories
WOL, PXE, PME Wake Up
2 x Serial ATA 6.0Gb/s cables
1 x I/O shield
1 x User Manual
1 x Support DVD
Support DVD
Drivers
ASUS utilities
ASUS Update
Anti-virus software (OEM version)
Form factor
MicroATX form factor: 9.6 in x 8.2 in (24.4 cm x 20.8 cm)
* Specifications are subject to change without notice.
ix
x
Chapter 1
Product introduction
1.1
Welcome!
Thank you for buying an ASUS® P8H77-M LE motherboard!
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the items in
your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
Motherboard
Cables
ASUS P8H77-M LE motherboard
2 x Serial ATA 6.0Gb/s cables
1 x I/O shield
Accessories
Application DVD
Documentation
ASUS motherboard support DVD
User Manual
If any of the above items is damaged or missing, contact your retailer.
1.3
Special features
1.3.1
Product highlights
LGA1155 socket for Intel® Second/Third Generation Core™ i7
/ Core™ i5 / Core™ i3 / Pentium® / Celeron® Processors
This motherboard supports the Intel® 3rd/2nd generation Core™ i7/i5/
i3/Pentium®/Celeron® processors in the LGA1155 package, with iGPU,
memory, and PCI Express controllers integrated to support onboard
graphics out with dedicated chipsets, 2-channel (2 DIMMs) DDR3
memory, and 16 PCI Express 3.0/2.0 lanes. This provides great graphics
performance. Intel® 3rd/2nd generation Core™ i7/i5/i3/Pentium®/Celeron®
processors are among the most powerful and energy efficient CPUs in
the world.
ASUS P8H77-M LE
1-1
Intel® H77 Express Chipset
The Intel® H77 Express Chipset is a single-chipset designed to support
the 1155 socket Intel® 3rd/2nd generation Core™ i7/i5/ i3/Pentium®/
Celeron® processors. It provides improved performance by utilizing
serial point-to-point links, allowing increased bandwidth and stability.
Additionally, H77 chipset provides 4 USB 3.0 ports for 10 times faster
data retrieval speed. Moreover, Intel® H77 Express Chipset can also
enable iGPU function, letting users enjoy the latest Intel® integrated
graphic performance.
Dual-Channel DDR3 1600 / 1333 / 1066MHz support
The motherboard supports DDR3 memory that features data transfer
rates of 1600 / 1333 / 1066 MHz to meet the higher bandwidth
requirements of the latest 3D graphics, multimedia, and Internet
applications. The dual-channel DDR3 architecture enlarges the bandwidth
of your system memory to boost system performance.
Native SATA 6.0 Gb/s support
The Intel® H77 Express Chipset natively supports next-generation Serial
ATA (SATA) storage interface. This motherboard delivers up to 6.0 Gb/s
data transfer rates. Additionally, get enhanced scalability, faster data
retrieval, double the bandwidth of current bus systems.
Complete USB 3.0 Integration
ASUS facilitates strategic USB 3.0 accessibility for both the front and
rear panel – 4 USB 3.0 ports in total. Experience the latest plug &
play connectivity at speeds up to 10 times faster than USB 2.0. This
motherboard affords greater convenience to high speed connectivity.
HDMI Support
High Definition Multimedia Surface (HDMI) is a set of digital video
standards that delivers mulit-channel audio and uncompressed digital
video via a single cable. Supporting HDCP copy protection such as HD
DVD and Blu-ray discs, HDMI provides you with the highest quality home
theater experience.
PCI Express® 3.0
PCI Express® 3.0 (PCIe 3.0) is the latest PCI Express bus standard with
improved encoding schemes that provide twice the performance of the
current PCIe 2.0. The total bandwidth for a x16 link reaches a maximum
of 32Gb/s, double the 16 Gb/s of PCIe 2.0 (in x16 mode). As such, PCIe
3.0 provides userss an unprecendented data speeds, combined with the
convenience and seamless transition offerred by complete backward
compatibility with PCIe 1.0 and PCIe 2.0 devices. PCIe 3.0 will become
a must-have feature for users who wish to improve and optimize graphic
performance, as well as have the latest technology available to them.
* PCI 3.0 speed is supported by Intel® 3rd generation Core™ processors.
1-2
Chapter 1: Product introduction
Intel® Smart Response Technology
SSD Speed with HDD Capacity
Intel® Smart Response Technology boosts overall system performance by
using an installed fast SSD (min 18.6GB available capacity required) as
a cache for frequently accessed data. Key benefits include reduced load
and wait times, and lower power consumption through the elimination
of unnecessary hard drive spin. This technology combines SSD
performance with hard drive capacity, operating up to 6X faster than a
hard drive-only system.
* Intel® Smart Response Technology is supported by 3rd/2nd generation Intel®
Core™ processor family on Windows® 7™ operating systems.
** Operating systems must be installed on the HDD to launch Intel® Smart
Response Technology.
The capacity of the SSD is reserved for caching function.
1.3.2
Innovative ASUS features
ASUS UEFI BIOS
Flexible and Easy BIOS Interface
ASUS UEFI BIOS offers the first mouse-controlled graphical BIOS
designed with selectable modes, providing a user-friendly interface
that goes beyond the traditional keyboard-only controls. It also natively
supports fully-utilized hard drives larger than 2.2TB in 64-bit operating
systems.
ASUS exclusive interface
EZ Mode displays frequently-accessed info. Users can choose system
performance settings, and drag and drop boot priorities. Advanced Mode
for performance enthusiasts includes detailed DRAM settings via a
dedicated memory info page for complete insight.
New upgrade! Quick and easy information for enhanced system
control
- F12 BIOS snapshot hotkey for sharing UEFI information and
troubleshooting
- New F3 Shortcut for most accessed information
- ASUS DRAM SPD (Serial Presence Detect) information for accessing
memory information, detecting faulty DIMMs, and helping with difficult
POST situations.
ASUS DIGI+ VRM
Digital Power Control: Digital Power Design for the CPU and iGPU
All-new digital CPU power controls work perfectly together to match
digital power signal (SVID) requests from the CPU, with ultra-fast sensing
and response efficiently delivering precision power. Accurate delivery
reduces waste, and provides more stable CPU Vcore voltages. Users
can adjust CPU and its processor graphics (iGPU) voltages for various
overclocking scenarios, with accurate input through UEFI BIOS tuning
or the exclusive ASUS interface. This proprietary design increases
overclocking headroom to push performance to its full potential.
ASUS P8H77-M LE
1-3
USB 3.0 Boost
New ASUS USB 3.0 Boost technology supports UASP (USB Attached
SCSI Protocol), the latest USB 3.0 standard. With USB 3.0 Boost
technology, a USB device’s transmission speed is significantly increased
up to 170%, adding to an already impressive fast USB 3.0 transfer speed.
ASUS software automatically accelerates data speeds for compatible
USB 3.0 peripherals without the need for any user interaction.
GPU Boost
GPU Boost overclocks the integrated GPU in real time for the best
graphics performance. User-friendly UI facilitates flexible frequency and
voltage adjustments. Its ability to deliver multiple overclocking profiles
also provides rapid and stable system-level upgrades.
MemOK!
MemOK! quickly ensures memory boot compatibility. This remarkable
memory rescue tool requires a mere push of the button to patch memory
issues. MemOK! determines failsafe settings and dramatically improves
your system boot success. Get your system up and running in no time.
AI Suite II
With its fast user-friendly interface, ASUS AI Suite II consolidates all the
exclusive ASUS features into one simple to use software package. It
allows you to supervise overclocking, energy management, fan speed
control, and voltage and sensor readings. This all-in-one software offers
diverse and ease to use functions, with no need to switch back and forth
between different utilities.
ASUS Anti-Surge Protection
This special design prevents expensive devices and the motherboard
from damage caused by power surges from switching power supply
(PSU).
ASUS Q-Fan 2
The ASUS Q-Fan 2 technology intelligently adjusts both CPU and chassis
fan speeds according to system loading to ensure quiet, cool and efficient
operation.
EPU
Energy Efficiency All Around
Tap into the world’s first real-time PC power saving chip through the AI
Suite II utility. Get total system-wide energy optimization by automatically
detecting current PC loadings and intelligently moderating power
consumption. This also reduces fan noise and extends component
longevity.
ASUS MyLogo2™
This feature allows you to convert your favorite photo into a 256-color
boot logo for a more colorful and vivid image on your screen.
1-4
Chapter 1: Product introduction
ASUS CrashFree BIOS 3
ASUS CrashFree BIOS 3 is an auto-recovery tool that allows you to
restore a corrupted BIOS file using the bundled support DVD or USB
flash disk that contains the latest BIOS file.
ASUS EZ Flash 2
ASUS EZ Flash 2 is a utility that allows you to update the BIOS without
using an OS-based utility.
C.P.R. (CPU Parameter Recall)
The BIOS C.P.R. feature automatically restores the CPU default settings
when the system hangs due to overclocking failure. C.P.R. eliminates the
need to open the system chassis and clear the RTC data. Simply shut
down and reboot the system, and the BIOS automatically restores the
CPU parameters to their default settings.
ErP ready
The motherboard is European Union´s Energy-related Products (ErP)
ready, and ErP requires products to meet certain energy efficiency
requirements in regards to energy consumptions. This is in line with
ASUS vision of creating environment-friendly and energy-efficient
products through product design and innovation to reduce carbon
footprint of the product and thus mitigate environmental impacts.
1.3.3
Other special features
LucidLogix Virtu MVP
LucidLogix Virtu MVP featuring HyperFormance™ Technology boosts
your PCIe graphics card up to 60% beyond its original performance.
Designed for Intel® processor graphics and Windows® 7 PCs, it perfectly
combines the performance of discrete graphic cards with fast computing
iGPU. Also, with newly designed Virtual Sync, users can enjoy a
smoother gaming experience by eliminating tearing artifacts. LucidLogix
Virtu MVP can also dynamically assigns tasks to the best available
graphics resource, based on power, performance, and system load. This
allows users to fully utilize 3x faster video conversion with Intel® Quick
Sync Video 2.0 technology while retaining high-end 3D rendering and
gaming performance, provided by both NVIDIA and AMD graphic cards.
When the PCIe graphic cards are not required, the graphics control
switches to the Intel® processor graphics, reducing the PCIe graphics
power use down to zero, making the system more environment-friendly.
For users searching for perfection, LucidLogix Virtu MVP provides great
graphical performance, and best quality and efficiency.
* LucidLogix Virtu MVP supports Windows® 7 operating system.
** Intel® Quick Sync Video feature is supported by 3rd/2nd generation Intel®
Core™ processor family.
ASUS P8H77-M LE
1-5
1.4
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
•
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due to
static electricity.
•
•
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so may
cause severe damage to the motherboard, peripherals, or components.
1-6
Chapter 1: Product introduction
1.5
Motherboard overview
Before you install the motherboard, study the configuration of your chassis to ensure that the
motherboard fits into it.
Ensure that you unplug the power cord before installing or removing the motherboard.
Failure to do so can cause you physical injury and damage motherboard components.
1.5.1
Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
1.5.2
Screw holes
Place six screws into the holes indicated by circles to secure the motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
P8H77-M LE
ASUS P8H77-M LE
1-7
1.5.3
Motherboard layout
1
2
3
1
4
20.8cm(8.2in)
KBMS_USB34
HDMI
CPU_FAN
DIGI
+VRM
EATX12V
5
6
MemOK!
DRAM_LED
2
USB3_12
LAN_USB12
RTL
8111F
CHA_FAN
Lithium Cell
CMOS Power
7
AUDIO
8
9
PCIEX16
P8H77-M LE
SATA3G_2 SATA3G_1
ASM
PCIEX1_1
1083
Super
I/O
10
11
Intel®
H77
64Mb
BIOS
SB_PWR
PCI1
SATA3G_4 SATA3G_3
10
PCIEX4_1
ALC
887
SPDIF_OUT
USB910 USB78
USB56SPEAKER
SATA6G_2 SATA6G_1
12
AAFP
F_PANEL
17
16
15
14 13
1.5.4
Layout contents
Connectors/Jumpers/Slots/LED
Page
Connectors/Jumpers/Slots/LED
Page
1.
2.
3.
CPU and chassis fan connectors (4-pin
CPU_FAN, 3-pin CHA_FAN)
1-26 10. Intel® H77 Serial ATA 3.0Gb/s connectors
(7-pin SATA3G_1~4 [blue])
1-28
ATX power connectors (24-pin EATXPWR,
8-pin EATX12V)
1-25 11. Onboard LED (SB_PWR)
1-31
1-29
1-27
Intel® LGA1155 CPU socket
1-9
12. Intel® H77 Serial ATA 6.0Gb/s connectors
(7-pin SATA6G_1/2 [gray])
4.
5.
6.
DDR3 DIMM slots
1-14 13. Speaker connector (4-pin SPEAKER)
DRAM LED (DRAM_LED)
MemOK! switch
1-31 14. System panel connector (10-1 pin F_PANEL) 1-27
1-30 15. USB 2.0 connectors (10-1 pin USB56,
USB78, USB910)
1-28
7.
8.
USB 3.0 connector (20-1 pin USB3_34)
Clear RTC RAM (3-pin CLRTC)
1-29 16. Digital audio connector (4-1 pin SPDIF_OUT) 1-24
1-21 17. Front panel audio connector (10-1 pin AAFP) 1-24
9.
Chassis intrusion connector (4-1 pin CHASSIS)
1-26
1-8
Chapter 1: Product introduction
1.6
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1155 socket designed for the Intel®
3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium / Celeron Processors.
P8H77-M LE
P8H77-M LE CPU socket LGA1155
Unplug all power cables before installing the CPU.
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the
socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing,
or if you see any damage to the PnP cap/socket contacts/motherboard components.
ASUS will shoulder the cost of repair only if the damage is shipment/transit-related.
•
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1155 socket.
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
ASUS P8H77-M LE
1-9
4
C
A
B
5
ASUS P8H77-M LE
1-11
To uninstall the CPU heatsink and fan assembly
1
2
A
B
B
A
ASUS P8H77-M LE
1-13
1.7
System memory
1.7.1
Overview
The motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but
is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are
developed for better performance with less power consumption.
The figure illustrates the location of the DDR3 DIMM sockets:
Channel
Sockets
Channel A
Channel B
DIMM_A1
DIMM_B1
P8H77-M LE
P8H77-M LE 240-pin DDR3 DIMM sockets
1.7.2
Memory configurations
You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM
sockets.
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
•
•
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS.
- Install a 64-bit Windows® OS when you want to install 4GB or more on the
motherboard.
•
•
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency
adjustment.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
1-14
Chapter 1: Product introduction
P8H77-M LE Motherboard Qualified Vendors Lists (QVL)
DDR3-1866 MHz capability
DIMM socket support (Optional)
SS/ Chip
DS
Chip
Brand NO.
Vendors
Part No.
Size
Timing
Voltage
1 DIMM
2 DIMMs
A-DATA
AX3U1866PB2G8-DP2(XMP)
CMT4GX3M2A1866C9(XMP)
CMT6GX3MA1866C9(XMP)
CMZ8GX3M2A1866C9(XMP)
F3-14900CL9Q-16GBZL(XMP)
2GB
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8-8-8-24
9-9-9-24
9-9-9-24
9-10-9-27
9-10-9-28
1.55V-1.75V
1.65V
•
•
•
•
•
•
•
•
•
•
•
CORSAIR
CORSAIR
CORSAIR
G.SKILL
G.SKILL
G.SKILL
G.SKILL
4GB(2 x 2GB)
6GB(3 x 2GB)
8GB(2 x 4GB)
16GB(4GB x4)
•
•
•
•
•
•
•
•
•
•
1.65V
1.50V
1.5V
F3-14900CL10Q2-64GBZLD(XMP) 64GB(8GB x 8) DS
10-11-10-30 1.5V
F3-14900CL9D-8GBXL(XMP)
F3-14900CL9Q-8GBXL(XMP)
8GB(2 x 4GB)
8GB(2GB x 4)
3GB(3 x 1GB)
DS
DS
SS
9-10-9-28
1.5V
9-9-9-24
1.6V
KINGSTON KHX1866C9D3T1K3/3GX(XMP)
KINGSTON KHX1866C9D3K4/16GX(XMP)
KINGSTON KHX1866C9D3T1K3/6GX(XMP)
-
-
-
1.65V
1.65V
1.65V
16GB(4GB x 4) DS
6GB(3 x 2GB) DS
DDR3 1866 MHz memory module will run at DDR3 1600 MHz frequency as default.
DDR3-1600 MHz capability
DIMM socket
support (Optional)
SS/ Chip
DS Brand
Vendors
Part No.
Size
Chip NO.
Timing
Voltage
1 DIMM 2 DIMMs
3CCD-1509A
EL1126T
A-DATA
AM2U16BC2P1
2GB
SS A-DATA
-
-
•
•
A-DATA
A-DATA
AD31600E001GM(O)U3K
3GB(3 x 1GB) SS
4GB(2 x 2GB) DS
-
-
-
-
8-8-8-24
7-9-7-21
1.65V-1.85V
1.55V-1.75V
•
•
•
•
AX3U1600XB2G79-2X(XMP)
3CCD-1509A
EL1126T
A-DATA
AM2U16BC4P2
4GB
DS A-DATA
-
-
•
•
A-DATA
AX3U1600GC4G9-2G(XMP)
AX3U1600XC4G79-2X(XMP)
TR3X3G1600C8D(XMP)
8GB(2 x 4GB) DS
8GB(2 x 4GB) DS
3GB(3 x 1GB) SS
12GB(6 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
8GB(2 x 4GB) DS
8GB(2 x 4GB) DS
8GB(4 x 2GB) DS
6GB(3 x 2GB) DS
2GB(2 x 1GB) SS
4GB(2 x 2GB) SS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
8GB(2 x 4GB) DS
8GB(2 x 4GB) DS
8GB(2 x 4GB) DS
16GB(4 x 4GB) DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-24
7-9-7-21
8-8-8-24
8-8-8-24
8-8-8-24
9-9-9-24
7-8-7-20
9-9-9-24
9-9-9-24
8-8-8-24
8-8-8-24
9-9-9-24
9-9-9-24
7-8-7-20
9-9-9-24
-
1.55V-1.75V
1.55V-1.75V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.50V
1.65V
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
CMD12GX3M6A1600C8(XMP)
CMP4GX3M2A1600C8(XMP)
CMP4GX3M2A1600C9(XMP)
CMP4GX3M2C1600C7(XMP)
CMX4GX3M2A1600C9(XMP)
CMX4GX3M2A1600C9(XMP)
TR3X6G1600C8 G(XMP)
TR3X6G1600C8D G(XMP)
TR3X6G1600C9 G(XMP)
CMP8GX3M2A1600C9(XMP)
CMZ8GX3M2A1600C7R(XMP)
CMX8GX3M4A1600C9(XMP)
BL25664BN1608.16FF(XMP)
F3-12800CL9D-2GBNQ(XMP)
F3-12800CL7D-4GBRH(XMP)
F3-12800CL7D-4GBECO(XMP)
F3-12800CL7D-4GBRM(XMP)
F3-12800CL8D-4GBRM(XMP)
F3-12800CL9D-4GBECO(XMP)
F3-12800CL9D-4GBRL(XMP)
F3-12800CL9T-6GBNQ(XMP)
F3-12800CL7D-8GBRH(XMP)
F3-12800CL8D-8GBECO(XMP)
F3-12800CL9D-8GBRL(XMP)
GET316GB1600C9QC(XMP)
GV34GB1600C8DC(XMP)
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
9-9-9-24
7-7-7-24
7-7-8-24
7-8-7-24
8-8-8-24
9-9-9-24
9-9-9-24
9-9-9-24
7-8-7-24
8-8-8-24
9-9-9-24
9-9-9-28
8-8-8-28
7
1.5V
1.6V
XMP 1.35V
1.6V
1.60V
XMP 1.35V
1.5V
1.5V~1.6V
1.6V
XMP 1.35V
1.5V
1.6V
GEIL
2GB
1GB
2GB
2GB
DS
SS
DS
DS
1.6V
KINGMAX
KINGMAX
KINGMAX
FLGD45F-B8MF7 MAEH(XMP)
FLGE85F-B8KJ9A FEIS(XMP)
FLGE85F-B8MF7 MEEH(XMP)
-
•
•
•
•
•
-
-
7
-
KINGSTON KHX1600C9D3P1K2/4G
4GB(2 x 2GB) SS
12GB(3 x 4GB) DS
-
1.5V
KINGSTON KHX1600C9D3K3/12GX(XMP)
9-9-9-27
1.65V
KHX1600C9D3T1BK3/
KINGSTON
12GB(3 x 4GB) DS
-
-
9-9-9-27
1.65V
•
•
12GX(XMP)
KINGSTON KHX1600C9D3K4/16GX(XMP)
KINGSTON KHX1600C9AD3/2G
16GB(4GB x 4) DS
-
-
-
-
-
-
1.65V
1.65V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2GB
2GB
DS
KINGSTON KVR1600D3N11/2G-ES
DS KTC
D1288JPNDPLD9U 11-11-11-28 1.35V-1.5V
KINGSTON KHX1600C7D3K2/4GX(XMP)
KINGSTON KHX1600C8D3K2/4GX(XMP)
KINGSTON KHX1600C8D3T1K2/4GX(XMP)
KINGSTON KHX1600C9D3K2/4GX(XMP)
KINGSTON KHX1600C9D3LK2/4GX(XMP)
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
-
-
-
-
-
-
-
-
-
-
-
1.65V
8
8
9
9
1.65V
1.65V
1.65V
XMP 1.35V
ASUS P8H77-M LE
1-15
DDR3-1600 MHz capability (continued)
DIMM socket
support (Optional)
SS/ Chip
DS Brand
Vendors
Part No.
Size
Chip NO.
Timing
Voltage
1 DIMM 2 DIMMs
KINGSTON KHX1600C9D3X2K2/4GX(XMP) 4GB(2 x 2GB) DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-27
1.65V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
KINGSTON KHX1600C9D3T1K3/6GX(XMP)
KINGSTON KHX1600C9D3K3/6GX(XMP)
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
-
1.65V
9
1.65V
KINGSTON KHX1600C9D3T1BK3/6GX(XMP) 6GB(3 x 2GB) DS
9-9-9-27
1.65V
KINGSTON KHX1600C9D3K2/8GX(XMP)
KINGSTON KHX1600C9D3P1K2/8G
Super Talent WA160UX6G9
8GB(2 x 4GB) DS
8GB(2 x 4GB) DS
6GB(3 x 2GB) DS
9-9-9-27
1.65V
-
1.5V
9
-
Transcend
Asint
JM1600KLN-8GK
8GB(4GBx2)
2GB
DS Transcend TK483PCW3
-
-
SLZ3128M8-EGJ1D(XMP)
SLA302G08-EGG1C(XMP)
SLA302G08-EGJ1C(XMP)
M2P2G64CB8HC9N-DG(XMP)
998659(XMP)
DS Asint
DS Asint
DS Asint
3128M8-GJ1D
9-9-9-24
1.6V
Asint
4GB
302G08-GG1C
-
-
Asint
4GB
302G08-GJ1C
-
-
Elixir
2GB
DS
-
-
-
-
-
-
-
-
-
-
Mushkin
Mushkin
PATRIOT
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
4GB(2 x 2GB) DS
9-9-9-24
9-9-9-24
7-7-7-20
-
998659(XMP)
1.5~1.6V
1.7V
PGS34G1600LLKA
DDR3-1333 MHz capability
DIMM socket
support (Optional)
SS/ Chip
DS Brand
Vendors Part No.
Size
Chip NO.
Timing Voltage
1 DIMM 2 DIMMs
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
AD3U1333C2G9
2GB
2GB
2GB
2GB
SS A-DATA
SS A-Data
SS ADATA
3CCD-1509HNA1126L
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
AD63I1B0823EV
AM2U139C2P1
3CCA-1509A
3CCD-1509A EL1127T
AX3U1333C2G9-BP
AD31333G001GOU
SS
-
-
-
-
3GB(3 x 1GB) SS
8-8-8-24 1.65-1.85V
1.25V-
9-9-9-24 1.35V(low
voltage)
A-DATA
AXDU1333GC2G9-2G(XMP)
4GB(2 x 2GB) SS
-
-
•
•
A-DATA
A-DATA
A-DATA
A-DATA
Apacer
Apacer
Apacer
Apacer
AD31333G002GMU
AD63I1C1624EV
AM2U139C4P2
2GB
4GB
4GB
8GB
2GB
2GB
2GB
4GB
1GB
DS
-
-
8-8-8-24 1.65-1.85V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DS A-Data
DS ADATA
DS ELPIDA
DS Apacer
DS Apacer
DS Apacer
DS Apacer
3CCA-1509A
-
-
-
-
9
-
-
-
-
-
-
-
-
-
3CCD-1509A EL1127T
SU3U1333W8G9-B
78.A1GC6.9L1
J4208BASE-DJ-F
AM5D5808DEWSBG
78.A1GC6.9L1
AM5D5808FEQSBG
AU02GFA33C9NBGC
78.B1GDE.9L10C
AM5D5808APQSBG
AM5D5908CEHSBG
CORSAIR CM3X1024-1333C9
CORSAIR TR3X3G1333C9 G
CORSAIR TR3X6G1333C9 G
SS
-
-
-
-
-
-
-
-
-
-
9-9-9-24 1.60V
9-9-9-24 1.50V
9-9-9-24 1.50V
9-9-9-24 1.60V
9-9-9-24 1.50V
3GB(3 x 1GB) SS
6GB(3 x 2GB) SS
CORSAIR CMD24GX3M6A1333C9(XMP) 24GB(6 x 4GB) DS
CORSAIR TW3X4G1333C9D G
CORSAIR CM3X4GA1333C9N2
CORSAIR CMX4GX3M1A1333C9
CORSAIR CMD8GX3M4A1333C7
4GB(2 x 2GB) DS
4GB
4GB
DS CORSAIR 256MBDCJGELC0401136 9-9-9-24
-
DS
-
-
-
9-9-9-24 1.50V
7-7-7-20 1.60V
8GB(4 x 2GB) DS
-
Crucial
Crucial
Crucial
CT12864BA1339.8FF
1GB
2GB
SS Micron
DS Micron
9FF22D9KPT
9
9
-
-
CT25664BA1339.16FF
BL25664BN1337.16FF (XMP)
9KF27D9KPT
-
6GB(3 x 2GB) DS
-
7-7-7-24 1.65V
1.35V(low
voltage)
ELPIDA
ELPIDA
EBJ10UE8EDF0-DJ-F
EBJ21UE8EDF0-DJ-F
1GB
SS ELPIDA
J1108EDSE-DJ-F
J1108EDSE-DJ-F
-
•
•
•
•
1.35V(low
voltage)
2GB
1GB
DS ELPIDA
SS G.SKILL
-
-
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
F3-10600CL8D-2GBHK(XMP)
F3-10600CL9D-2GBNQ
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2GB(2 x 1GB) SS
3GB(3 x 1GB) SS
-
-
-
-
-
-
9-9-9-24 1.5V
F3-10666CL7T-3GBPK(XMP)
7-7-7-18 1.5~1.6V
8-8-8-24 XMP 1.35V
7-7-7-18 1.5~1.6V
7-7-7-21 1.5V
F3-10666CL8D-4GBECO(XMP) 4GB(2 x 2GB) DS
F3-10666CL7T-6GBPK(XMP)
F3-10666CL7D-8GBRH(XMP)
GV32GB1333C9DC
6GB(3 x 2GB) DS
8GB(2 x 4GB) DS
2GB(2 x 1GB) DS
9-9-9-24 1.5V
1.3V(low
9-9-9-24
GEIL
GG34GB1333C9DC
4GB(2 x 2GB) DS GEIL
GL1L128M88BA12N
•
•
voltage)
GEIL
GEIL
GV34GB1333C9DC
GVP34GB1333C7DC
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
-
-
-
-
9-9-9-24 1.5V
7-7-7-24 1.5V
•
•
•
•
1.35V(low
voltage)
Hynix
Hynix
Hynix
Hynix
HMT112U6TFR8A-H9
HMT325U6BFR8C-H9
HMT125U6TFR8A-H9
HMT351U6BFR8C-H9
1GB
2GB
2GB
SS Hynix
SS Hynix
DS Hynix
DS Hynix
H5TC1G83TFRH9A
H5TQ2G83BFRH9C
H5TC1G83TFRH9A
H5TQ2G83BFRH9C
-
•
•
•
•
•
•
-
-
-
1.35V(low
voltage)
4GB
1GB
2GB
2GB
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
KINGMAX FLFD45F-B8KL9 NAES
KINGMAX FLFE85F-C8KF9 CAES
KINGMAX FLFE85F-C8KL9 NAES
SS KINGMAX KKB8FNWBFGNX-27A
SS KINGMAX KFC8FMFXF-DXX-15A
SS KINGMAX KFC8FNLXF-DXX-15A
1-16
Chapter 1: Product introduction
DDR3-1333 MHz capability (continued)
DIMM socket
support (Optional)
SS/ Chip
DS Brand
Vendors
Part No.
Size
Chip NO.
Timing Voltage
1 DIMM 2 DIMMs
KINGMAX
KINGMAX
KINGMAX
KINGMAX
FLFE85F-C8KM9 NAES
FLFE85F-B8KL9 NEES
FLFF65F-C8KL9 NEES
FLFF65F-C8KM9 NEES
2GB
2GB
4GB
4GB
SS KINGMAX KFC8FNMXF-BXX-15A
DS KINGMAX KKB8FNWBFGNX-26A
DS KINGMAX KFC8FNLXF-DXX-15A
DS KINGMAX KFC8FNMXF-BXX-15A
-
-
•
•
•
•
•
•
•
•
•
•
•
•
-
-
-
-
-
-
KINGSTON KVR1333D3N9/1G(low profile) 1GB
KINGSTON KVR1333D3N9/2G(low profile) 2GB
KVR1333D3S8N9/2G-SP(low
SS ELPIDA
SS Hynix
J1108BDBG-DJ-F
9
9
1.5V
-
H5TQ2G83AFRH9C
KINGSTON
2GB
SS ELPIDA
J2108BCSE-DJ-F
-
1.5V
•
•
profile)
KINGSTON KVR1333D3N9/2G
KINGSTON KVR1333D3N9/2G
2GB
2GB
DS KTC
D1288JPNDPLD9U
J1108BDSE-DJ-F
9
9
1.5V
1.5V
•
•
•
•
DS ELPIDA
KVR1333D3N9/2G-SP(low
profile)
KINGSTON
KINGSTON
2GB
2GB
DS KTC
D1288JEMFNGD9U
-
-
1.5V
1.5V
•
•
•
•
KVR1333D3N9/2G-SP(low
profile)
DS KINGSTON D1288JPSFPGD9U
KINGSTON KHX1333C7D3K2/4GX(XMP) 4GB(2 x 2GB) DS
KINGSTON KHX1333C9D3UK2/4GX(XMP) 4GB(2 x 2GB) DS
-
-
-
7
9
9
-
1.65V
XMP 1.25V
1.5V
•
•
•
•
•
•
•
•
•
•
•
•
-
KINGSTON KVR1333D3N9/4G(low profile) 4GB
DS ELPIDA
DS ELPIDA
DS KTC
J2108BCSE-DJ-F
J2108BCSE-DJ-F
D2568JENCNGD9U
H5TQ2G83AFR
KINGSTON KVR1333D3N9/4G(low profile) 4GB
1.5V
KINGSTON KVR1333D3N9/4G
KINGSTON KVR1333D3N9/4G
4GB
4GB
-
1.5V
DS Hynix
-
-
KVR1333D3N9/4G-SP(low
profile)
KINGSTON
4GB
DS KINGSTON D2568JENCPGD9U
-
1.5V
•
•
Micron
MT4JTF12864AZ-1G4D1
MT8JTF12864AZ-1G4F1
MT8JTF25664AZ-1G4D1
MT8JTF25664AZ-1G4M1
MT16JTF25664AZ-1G4F1
MT16JTF51264AZ-1G4D1
NT4GC64B8HG0NF-CG
AL7F8G73F-DJ2
1GB
1GB
2GB
2GB
2GB
4GB
4GB
1GB
2GB
1GB
2GB
2GB
4GB
8GB
1GB
SS Micron
SS Micron
SS Micron
SS MICRON
DS Micron
DS Micron
DS NANYA
SS PSC
OJD12D9LGQ
9FF22D9KPT
OJD12D9LGK
IJM22 D9PFJ
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Micron
9
-
Micron
Micron
-
Micron
9KF27D9KPT
OLD22D9LGK
NT5CB256M8GN-CG
A3P1GF3FGF
A3P1GF3FGF
9
-
Micron
NANYA
PSC
-
-
PSC
AL8F8G73F-DJ2
DS PSC
-
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
M378B2873FHS-CH9
M378B5773DH0-CH9
M378B5673FH0-CH9
M378B5273CH0-CH9
M378B1G73AH0-CH9
SS SAMSUNG K4B1G0846F
SS SAMSUNG K4B2G0846D
DS SAMSUNG K4B1G0846F
DS SAMSUNG K4B2G0846C
DS SAMSUNG K4B4G0846A-HCH9
-
-
-
-
-
Super Talent W1333UA1GH
Super Talent W1333UX2G8(XMP)
Super Talent W1333UB2GS
Super Talent W1333UB4GS
Super Talent W1333UX6GM
SS Hynix
H5TQ1G83TFR
-
9
8
9
-
2GB(2x 1GB) SS
-
2GB
4GB
DS SAMSUNG K4B1G0846F
DS SAMSUNG K4B2G0846C
6GB(3x 2GB) DS Micron
0BF27D9KPT
9-9-9-24 1.5V
Transcend
Transcend
Century
Elixir
JM1333KLN-2G
2GB
2GB
SS Hynix
DS Micron
SS NANYA
SS Elixir
H5TQ2G83BZRH9C
9GF27D9KPT
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TS256MLK64V3U
PC3-10600 DDR3-1333 9-9-9 1GB
NT5CB128M8DN-CF
N2CB2G80BN-CG
N2CB2G80DN-CG
N2CB2G80GN-CG
N2CB2G80BN-CG
N2CB2G80DN-CG
PM128M8D385-15
PE911-125E
M2F2G64CB88B7N-CG
M2F2G64CB88D7N-CG
M2F2G64CB88G7N-CG
M2F4G64CB8HB5N-CG
M2F4G64CB8HD5N-CG
2GB
2GB
2GB
4GB
4GB
2GB
2GB
Elixir
SS Elixir
Elixir
SS Elixir
Elixir
DS Elixir
Elixir
DS Elixir
KINGSHARE KSRPCD313332G
DS PATRIOT
SS MICRON
KINGSTEK
KSTD3PC-10600
SEC 904 HCH9
K4B1G0846D
Kingtiger
2GB DIMM PC3-10666
2GB
DS SAMSUNG
-
-
•
•
Kingtiger
Markvision
Markvision
PATRIOT
PATRIOT
PATRIOT
PATRIOT
RAMAXEL
RAMAXEL
RiDATA
KTG2G1333PG3
2GB
2GB
4GB
1GB
1GB
2GB
8GB
2GB
4GB
2GB
1GB
1GB
2GB
1GB
2GB
2GB
2GB
2GB
2GB
DS
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
BMD32048M1333C9-1123
BMD34096M1333C9-1124
PSD31G13332H
DS Markvision M3D1288P-13
DS Markvision M3D2568E-13
-
-
DS
-
-
9
-
PSD31G13332
DS PATRIOT
PM64M8D38U-15
PSD32G13332H
DS
DS
-
-
-
-
PG38G1333EL(XMP)
RMR1870ED48E8F-1333
RMR1870EC58E9F-1333
C304627CB1AG22Fe
-
9-9-9-24 1.5V
DS ELPIDA
DS ELPIDA
DS RiDATA
SS NANYA
SS Elixir
J1108BDBG-DJ-F
-
-
-
-
-
-
-
J2108BCSE-DJ-F
-
N/A
9
9
9
9
Silicon Power SP001GBLTU133S01
Silicon Power SP001GBLTU133S02
Silicon Power SP002GBLTU133S02
NT5CB128M8AN-CG
N2CB1680AN-C6
DS Elixir
N2CB1680AN-C6
TAKEMS
TAKEMS
TAKEMS
TAKEMS
UMAX
TMS1GB364D081-107EY
TMS2GB364D081-107EY
TMS2GB364D081-138EY
TMS2GB364D082-138EW
E41302GP0-73BDB
SS
DS
DS
DS
-
-
-
-
-
7-7-7-20 1.5V
7-7-7-20 1.5V
8-8-8-24 1.5V
8-8-8-24 1.5V
-
-
-
DS UMAX
DS AMPO
U2S24D30TP-13
AM3420803-13H
-
-
-
-
WINTEC
3WVS31333-2G-CNR
ASUS P8H77-M LE
1-17
DDR3-1066 MHz capability
DIMM socket
support (Optional)
Vendors
Part No.
Size
SS/DS Chip Brand Chip NO.
Timing Voltage
1 DIMM 2 DIMMs
Crucial
Crucial
CT12864BA1067.8FF
CT25664BA1067.16FF
1GB
2GB
SS
DS
Micron
Micron
9GF22D9KPT
9HF22D9KPT
7
7
-
-
•
•
•
•
1.35V(low
voltage)
ELPIDA
ELPIDA
EBJ10UE8EDF0-AE-F
EBJ21UE8EDF0-AE-F
1GB
2GB
SS
DS
ELPIDA
ELPIDA
J1108EDSE-DJ-F
J1108EDSE-DJ-F
-
-
•
•
•
•
1.35V(low
voltage)
KINGSTON KVR1066D3N7/1G(low profile) 1GB
SS
DS
DS
SS
DS
DS
ELPIDA
ELPIDA
Hynix
J1108BFSE-DJ-F
J1108BDSE-DJ-F
H5TQ2G83AFR
9GF22D9KPT
7
7
7
7
7
-
1.5V
•
•
•
•
•
•
•
•
•
•
•
•
KINGSTON KVR1066D3N7/2G
KINGSTON KVR1066D3N7/4G
2GB
4GB
1GB
2GB
2GB
1.5V
1.5V
Micron
MT8JTF12864AZ-1G1F1
MT16JTF25664AZ-1G1F1
2GB DIMM PC3-8500
Micron
Micron
Hynix
-
-
-
Micron
9HF22D9KPT
Kingtiger
H5TQ1G83AFP G7C
SS: Single-sided / DS: Double-sided
DIMM support:
• 1 DIMM: Supports one module inserted into any slot as single-channel memory
configuration.
• 2 DIMMs: Supports one pair of modules inserted into both slots as one pair of dual-
channel memory configuration.
1-18
Chapter 1: Product introduction
1.7.3
Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other system components.
Failure to do so can cause severe damage to both the motherboard and the components.
2
1.
2.
Press the retaining clips outward to
unlock a DIMM socket.
DIMM notch
Align a DIMM on the socket such that
the notch on the DIMM matches the
DIMM slot key on the socket.
1
Unlocked retaining clip
DIMM slot key
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
3
3.
Firmly insert the DIMM into the socket
until the retaining clips snap back in place
and the DIMM is properly seated.
Locked Retaining Clip
1.7.4
Removing a DIMM
To remove a DIMM:
1. Simultaneously press the retaining clips
outward to unlock the DIMM.
2
Support the DIMM lightly with your
fingers when pressing the retaining
clips. The DIMM might get damaged
when it flips out with extra force.
1
DIMM notch
2.
Remove the DIMM from the socket.
ASUS P8H77-M LE
1-19
1.8
Expansion slots
In the future, you may need to install expansion cards. The following sub-sections describe
the slots and the expansion cards that they support.
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
1.8.1
Installing an expansion card
To install an expansion card:
1.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
2.
3.
Remove the system unit cover (if your motherboard is already installed in a chassis).
Remove the bracket opposite the slot that you intend to use. Keep the screw for later
use.
4.
Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
5.
6.
Secure the card to the chassis with the screw you removed earlier.
Replace the system cover.
1.8.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.
Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for
information on BIOS setup.
2.
3.
Assign an IRQ to the card.
Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that
the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI
groups, making the system unstable and the card inoperable.
1.8.3
PCI slot
The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that
comply with PCI specifications.
1.8.4
PCI Express x1 slot
This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that
comply with the PCI Express specifications.
1.8.5
PCI Express x4 slot
This motherboard supports PCI Express x4 network cards, SCSI cards, and other cards that
comply with the PCI Express specifications.
1-20
Chapter 1: Product introduction
1.8.6
PCI Express x16 slot
This motherboard has a PCI Express 3.0 x16 slot that supports PCI Express 3.0/2.0 x16
graphic cards complying with the PCI Express specifications.
IRQ assignments for this motherboard
A
B
C
D
E
F
G
H
Intel PCH SATA controller #0
–
–
–
shared
–
–
–
–
Intel PCH SATA controller #1
–
–
–
shared
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Realtek 8111F controller
PCIE x16
–
shared
–
–
–
–
–
–
shared
shared
shared
–
–
–
–
–
–
PCIE x4
–
–
PCIE x1
PCI
shared
1.9
Jumpers
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
CLRTC
P8H77-M LE
Normal
Clear RTC
(Default)
P8H77-M LE Clear RTC RAM
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
ASUS P8H77-M LE
1-21
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
•
•
If the steps above do not help, remove the onboard battery and move the jumper again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature. Shut
down and reboot the system, then the BIOS automatically resets parameter settings to
default values.
1.10
Connectors
1.10.1
Rear panel connectors
1
2
3
4 5
8
11
10
9
7
6
1.
2.
PS/2 Keyboard / Mouse combo port. This port is for a PS/2 keyboard or mouse.
Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
3.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub. Refer to the table below for the LAN port LED indications.
LAN port LED indications
Speed
LED
Activity Link
LED
ACT/LINK LED
Description
No link
SPEED LED
Status
OFF
Status
Description
OFF
10 Mbps connection
ORANGE
Linked
ORANGE 100 Mbps connection
GREEN 1 Gbps connection
BLINKING Data activity
LAN port
1-22
Chapter 1: Product introduction
4.
5.
Line In port (light blue). This port connects the tape, CD, DVD player, or other audio
sources.
Line Out port (lime). This port connects to a headphone or a speaker. In 4-channel,
6-channel, and 8-channel configurations, the function of this port becomes Front
Speaker Out.
6.
Microphone port (pink). This port connects a microphone.
Refer to the audio configuration table below for the function of the audio ports in the 2, 4, 6,
or 8-channel configuration.
Audio 2, 4, 6, 8-channel configuration
Port
Headset 2-channel
4-channel
Rear Speaker Out
Front Speaker Out
Mic In
6-channel
Rear Speaker Out
Front Speaker Out
Bass/Center
-
8-channel
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
Line In
Line Out
Mic In
-
Rear Speaker Out
Front Speaker Out
Bass/Center
-
Side Speaker Out
To configure an 8-channel audio output:
Use a chassis with HD audio module in the front panel to support an 8-channel audio output.
7.
8.
USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.
USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports connect to
USB 3.0/2.0 devices.
•
•
DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows®
operating system.
Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows®
OS environment and after the USB 3.0 driver installation.
•
•
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
9.
DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be converted to
output RGB Signal to CRT and isn’t compatible with DVI-I.
10. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
11. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.
ASUS P8H77-M LE
1-23
1.10.2
Internal connectors
1.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
AAFP
PIN 1
PIN 1
P8H77-M LE
HD-audio-compliant
pin definition
Legacy AC’97
compliant definition
P8H77-M LE Front panel audio connector
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97
front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD]. See section 2.5.6 Onboard Devices Configuration for details.
2.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
P8H77-M LE
SPDIF_OUT
P8H77-M LE Digital audio connector
The S/PDIF module is purchased separately.
1-24
Chapter 1: Product introduction
3.
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
EATX12V
EATXPWR
+3 Volts
GND
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
PIN 1
+5 Volts
GND
GND
GND
P8H77-M LE
+5 Volts
GND
PSON#
GND
+3 Volts
+3 Volts
-12 Volts
+3 Volts
IN 1
P8H77-M LE ATX power connectors
•
For a fully configured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum
power of 350 W.
•
DO NOT forget to connect the 4-pin / 8-pin ATX +12V power plug. Otherwise, the system
will not boot up.
•
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or may
not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
ASUS P8H77-M LE
1-25
4.
CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
CPU_FAN
CHA_FAN
P8H77-M LE
GND
+12V
Rotation
P8H77-M LE fan connectors
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
•
•
The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.
Only the 4-pin CPU fan supports the ASUS Q-Fan 2 feature.
5.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusion sensor or switch sends a high-level signal to this connector when a chassis
component is removed or replaced. The signal is then generated as a chassis intrusion
event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
CHASSIS
GND
Chassis Signal
P8H77-M LE
+5VSB_MB
P8H77-M LE Chassis intrusion connector
1-26
Chapter 1: Product introduction
6.
System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
F_PANEL
PLED
PWRBTN
PIN 1
P8H77-M LE
+HDLED
RESET
P8H77-M LE System panel connector
•
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin +HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
•
•
ATX power button/soft-off button (2-pin PWRBTN)
This 2-pin connector is for the system power button.
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
7.
Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
SPEAKER
P8H77-M LE
PIN 1
P8H77-M LE Speaker out connector
ASUS P8H77-M LE
1-27
8.
Intel® H77 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4 [blue])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
SATA3G_2
SATA3G_1
SATA3G_4
SATA3G_3
P8H77-M LE
P8H77-M LE Intel® SATA 3.0Gb/s connectors
•
These connectors are set to [IDE] by default. If you intend to create a Serial ATA RAID
set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID].
See section 2.5.3 SATA Configuration for details.
•
•
Before creating a RAID set, refer to the RAID Supplementary Guide included in the
folder named Manual in the support DVD.
You must install Windows® XP Service Pack 3 or later version before using Serial ATA
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows® XP SP3 or later version.
•
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI]. See section 2.5.3 SATA Configuration for details.
9.
USB 2.0 connectors (10-1 pin USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
USB910
USB78
USB56
P8H77-M LE
P8H77-M LE USB2.0 connector
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB module cable is purchased separately.
1-28
Chapter 1: Product introduction
10. Intel® H77 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2 [gray])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
SATA6G_2
SATA6G_1
P8H77-M LE
P8H77-M LE Intel® SATA 6.0Gb/s connectors
•
These connectors are set to [IDE] by default. If you intend to create a Serial ATA RAID
set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID].
See section 2.5.3 SATA Configuration for details.
•
•
Before creating a RAID set, refer to the RAID Supplementary Guide included in the
folder named Manual in the support DVD.
You must install Windows® XP Service Pack 3 or later version before using Serial ATA
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows® XP SP3 or later version.
•
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI]. See section 2.5.3 SATA Configuration for details.
11. USB 3.0 connector (20-1 pin USB3_34)
This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable
to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your
chassis support customized front panel installation, with ASUS USB 3.0 header, you
can have a front panel USB 3.0 solution.
USB3_34
P8H77-M LE
P8H77-M LE USB3.0 front panel connector
•
•
The USB 3.0 module is purchased separately.
Due to Intel® limitations, the USB3_34 only supports Windows® 7 operating system.
ASUS P8H77-M LE
1-29
1.11
Onboard switches
Onboard switches allow you to fine-tune performance when working on a bare or open-case
system. This is ideal for overclockers and gamers who continually change settings to
enhance system performance.
MemOK! switch
Installing DIMMs that are incompatible with the motherboard may cause system boot failure,
and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the
MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility
tuning for successful boot.
PH7M L
P8H77-M LE MemOK! switch
•
•
Refer to section 1.12 Onboard LEDs for the exact location of the DRAM_LED.
The DRAM_LED also lights when the DIMM is not properly installed. Turn off the system
and reinstall the DIMM before using the MemOK! function.
•
•
The MemOK! switch does not function under Windows® OS environment.
During the tuning process, the system loads and tests failsafe memory settings. It takes
about 30 seconds for the system to test one set of failsafe settings. If the test fails,
the system reboots and test the next set of failsafe settings. The blinking speed of the
DRAM_LED increases, indicating different test processes.
•
Due to memory tuning requirement, the system automatically reboots when each timing
set is tested. If the installed DIMMs still fail to boot after the whole tuning process, the
DRAM_LED lights continuously. Replace the DIMMs with ones recommended in the
Memory QVL (Qualified Vendors Lists) in this user manual or on the ASUS website at
•
•
•
If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn off
the computer and unplug the power cord for about 5–10 seconds.
If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A message will appear during POST reminding you that
the BIOS has been restored to its default settings.
We recommend that you download and update to the latest BIOS version from the
1-30
Chapter 1: Product introduction
1.12
Onboard LEDs
1.
Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
SB_PWR
P8H77-M LE
ON
OFF
Standby Power Powered Off
P8H77-M LE Onboard LED
2.
DRAM LED
DRAM LED checks the DRAM in sequence during motherboard booting process. If an
error is found , the LED next to the error device will continue lighting until the problem
is solved. This user-friendly design provides an intuitional way to locate the root
problem within a second.
DRAM LED
P8H77-M LE
P8H77-M LE DRAM LED
ASUS P8H77-M LE
1-31
1.13
Software support
1.13.1
Installing an operating system
This motherboard supports Windows® XP / Windows® 7 Operating Systems (OS). Always
install the latest OS version and corresponding updates to maximize the features of your
hardware.
•
•
Motherboard settings and hardware options vary. Refer to your OS documentation for
detailed information.
Ensure that you install Windows® XP Service Pack 3 / Windows® 7 or later versions
before installing the drivers for better compatibility and system stability.
1.13.2
Support DVD information
The Support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the Support DVD are subject to change at any time without notice. Visit the
To run the Support DVD
Place the Support DVD to the optical drive. If Autorun is enabled in your computer, the DVD
automatically displays the Specials screen. Click Drivers, Utilities, Manual, Contact, and
Specials tabs to display their respective menus.
The following screen is for reference only.
Click an icon to
display Support DVD/
motherboard information
Click an item to install
If Autorun is NOT enabled in your computer, browse the contents of the Support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
1-32
Chapter 1: Product introduction
Chapter 2
BIOS information
2.1
Managing and updating your BIOS
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to
restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update
utility.
2.1.1
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update the motherboard
BIOS in Windows® environment.
•
•
ASUS Update requires an Internet connection either through a network or an Internet
Service Provider (ISP).
This utility is available in the support DVD that comes with the motherboard package.
Installing ASUS Update
To install ASUS Update:
1.
2.
3.
Place the support DVD in the optical drive. The Specials menu appears.
Click the Utilities tab, then click AI Suite II.
Follow the onscreen instructions to complete the installation.
Quit all Windows® applications before you update the BIOS using this utility.
Updating the BIOS
To update the BIOS:
1.
From the Windows® desktop, click Start > Programs > ASUS > AI Suite II > AI Suite II X.XX.XX to
launch the AI Suite II utility. The AI Suite II Quick Bar appears.
2.
Click Update button from the Quick Bar, and then click ASUS Update from the popup menu. The
ASUS Update main screen appears. From the list, select either of the following methods:
Updating from the Internet
a.
b.
c.
Select Update BIOS from the Internet, then click Next.
Select the ASUS FTP site nearest you to avoid network traffic, then click Next.
From the FTP site, select the BIOS version that you wish to download then click Next.
ASUS P8H77-M LE
2-1
The ASUS Update utility is capable of updating itself through the Internet. Always update
the utility to avail all its features.
Updating from a BIOS file
a.
Select Update BIOS from file, then click Next.
b.
Locate the BIOS file from the Open window, then click Open.
3.
Follow the onscreen instructions to complete the updating process.
2.1.2
ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port.
2.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ
Flash Utility and press <Enter> to enable it.
Exit
ASUS EZ Flash 2 Utility V01.04
Flash Info
MODEL: P8H77-M LE
VER: 0301
DATE: 01/05/2012
File Path: fs0:\
Drive Info
fs0:\
Folder Info
01/05/2012 10:23p
8390656
P8H77MLE.CAP
File Info
MODEL:
VER:
DATE
Help Info
[Enter] Select or Load
[Tab] Switch
[Up/Down/PageUp/PageDown/Home/End] Move
[Esc] Exit
2-2
Chapter 2: BIOS information
3.
Press <Tab> to switch to the Drive field.
4.
Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then
press <Enter>.
5.
Press <Tab> to switch to the Folder Info field.
6.
Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform the BIOS
update process. Reboot the system when the update process is done.
•
This function supports USB flash disks with FAT 32/16 format and single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
2.1.3
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file
when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS
file using the motherboard support DVD or a USB flash drive that contains the updated BIOS
file.
•
•
Before using this utility, rename the BIOS file in the removable device into
P8H77MLE.CAP.
The BIOS file in the support DVD may not be the latest version. Download the latest
BIOS file from the ASUS website at www.asus.com.
Recovering the BIOS
To recover the BIOS:
1.
Turn on the system.
2.
Insert the support DVD to the optical drive or the USB flash drive that contains the BIOS file to the
USB port.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility reads the BIOS
file and enters ASUS EZ Flash 2 utility automatically.
4.
The system requires you to enter BIOS Setup to recover BIOS setting. To ensure system
compatibility and stability, we recommend that you press <F5> to load default BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
ASUS P8H77-M LE
2-3
2.1.4
ASUS BIOS Updater
The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also
allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or
gets corrupted during the updating process.
The succeeding utility screens are for reference only. The actual utility screen displays may
not be same as shown.
Before updating BIOS
1.
Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single
partition.
2.
Download the latest BIOS file and BIOS Updater from the ASUS website at
http://support.asus.com and save them on the USB flash drive.
NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS
Updater to a hard disk drive or USB flash drive in NTFS format.
3.
Turn off the computer and disconnect all SATA hard disk drives (optional).
Booting the system in DOS environment
1.
Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
2.
Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS Boot Device
Select Menu. Insert the support DVD into the optical drive and select the optical drive as the boot
device.
Please select boot device:
SATA: XXXXXXXXXXXXXXXX
USB XXXXXXXXXXXXXXXXX
UEFI: XXXXXXXXXXXXXXXX
Enter Setup
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
3.
4.
When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the
item number.
At the FreeDOS prompt, type d:and press <Enter> to switch the disk from
Drive C (optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:\>d:
D:\>
2-4
Chapter 2: BIOS information
Updating the BIOS file
To update the BIOS file using BIOS Updater
1.
At the FreeDOS prompt, type bupdater /pc /gand press <Enter>.
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.30
Current ROM
BOARD: P8H77-M LE
VER: 0301
Update ROM
BOARD: Unknown
VER: Unknown
DATE: 01/05/2012
DATE: Unknown
PATH: A:\
A:
P8H77MLE.CAP
8390656 2012-01-05 17:30:48
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
3.
Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys to select
the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file and prompts you to
confirm BIOS update.
Are you sure to update BIOS?
Yes
No
4.
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater.
Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS prompt
after updating BIOS.
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit menu. Refer to section 2.9
Exit menu for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
ASUS P8H77-M LE
2-5
2.2
BIOS setup program
Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS
screens include navigation keys and brief online help to guide you in using the BIOS Setup
program.
Entering BIOS Setup at startup
To enter BIOS Setup at startup:
•
Press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>,
POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
•
•
Press <Ctrl>+<Alt>+<Del> simultaneously.
Press the reset button on the system chassis.
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from
a running operating system can cause damage to your data or system. We recommend to
always shut down the system properly from the operating system.
•
•
•
•
The BIOS setup screens shown in this section are for reference purposes only, and may
not exactly match what you see on your screen.
motherboard.
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu. See section 2.9 Exit Menu for details.
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 1.9 Jumpers for information on
how to erase the RTC RAM.
BIOS menu screen
The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the
EZ Mode/Advanced Mode screen.
2-6
Chapter 2: BIOS information
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press F7 hot
key for the advanced BIOS settings.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 2.7 Boot menu for details.
Selects the display language of
the BIOS setup program
Displays the CPU/motherboard temperature,
Exits the BIOS setup program without saving
CPU/5V/3.3V/12V voltage output,
CPU/chassis fan speed
the changes, saves the changes and resets
the system, or enters the Advanced Mode
Exit/Advanced Mode
UEFI BIOS Utility - EZ Mode
P8H77-M LE
BIOS Version : 0301
English
Build Date : 01/05/2012
CPU Type : Intel(R) Core(TM) i5-2500 CPU 0 @ 3.30GHz Speed : 3300 MHz
Total Memory : 1024 MB (DDR3 1333MHz)
Friday [10/08/2010]
Temperature
Voltage
CPU
Fan Speed
CPU_FAN 3325RPM CHA_FAN
CPU
MB
+113.0ºF/+45.0ºC
+75.2ºF/+40.0ºC
1.248V
3.344V
5V
5.160V
N/A
3.3V
12V
12.248V
System Performance
Quiet
Performance
Boot Priority
Energy Saving
Normal
Use the mouse to drag or keyboard to navigate to decide the boot priority.
Shortcut (F3) Advanced Mode(F7)
Boot Menu(F8)
Default(F5)
Power Saving mode
Loads optimized default
ASUS Optimal mode
Selects the Advanced
mode functions
Normal mode
Selects the boot device priority
Selects the boot
device priority
Displays the system properties of the
selected mode on the right hand side
Displays the Advanced mode menus
•
•
The boot device options vary depending on the devices you installed to the system.
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
ASUS P8H77-M LE
2-7
Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure
the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.
To access the EZ Mode, click Exit, then select ASUS EZ Mode.
Back button
UEFI BIOS Utility - Advanced Mode
Menu items
Menu bar
Configuration fields
General help
Exit
Main
Back
Ai Tweaker
Advanced
Monitor
Boot
Tool
Advanced\ Onboard Devices Configuration
>
Enabled/Disabled Realtek Controller.
HD Audio Controller
Front Panel Type
SPDIF Out Type
Enabled
HD
SPDIF
Realtek LAN Controller
Realtek PXE OPROM
Enabled
Disabled
Realtek LAN Controller
Disabled
Enabled
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Pop-up window
Scroll bar
Navigation keys
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have
their respective menu items.
Back button
This button appears when entering a submenu. Press <Esc> or use the USB mouse to click
this button to return to the previous menu screen.
Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press <Enter>.
2-8
Chapter 2: BIOS information
Pop-up window
Select a menu item and press <Enter> to display a pop-up window with the configuration
options for that item.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on
the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the
other items on the screen.
Navigation keys
At the bottom right corner of the menu screen are the navigation keys for the BIOS setup
program. Use the navigation keys to select items in the menu and change the settings.
General help
At the top right corner of the menu screen is a brief description of the selected item.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press <Enter> to display a list of options.
ASUS P8H77-M LE
2-9
2.3
Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Exit
UEFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
BIOS Information
BIOS Version
Choose the system default language
0301 x64
01/05/2012
8.0.0.1296
B0
Build Date
ME Version
South Bridge Stepping
CPU Information
Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
Speed
3300 MHz
Memory Information
Total Memory
1024 MB (DDR3)
Memory Frequency
1333 MHz
System Language
English
System Date
System Time
Access Level
[Mon 12/27/2010]
[16:46:15]
Administrator
>
Security
2.3.1
System Language [English]
Allows you to choose the BIOS language version from the options. Configuration options:
[English]
[Español] [Русский]
2.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.3.3
System Time [xx:xx:xx]
Allows you to set the system time.
2.3.4
Security
The Security menu items allow you to change the system security settings.
•
•
If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.9 Jumpers for information on how to
erase the RTC RAM.
The Administrator or User Password items on top of the screen show the default Not
Installed. After you set a password, these items show Installed.
2-10
Chapter 2: BIOS information
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator
password for accessing the system. Otherwise, you might be able to see or change only
selected fields in the BIOS setup program.
To set an administrator password:
1.
2.
3.
Select the Administrator Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
To change an administrator password:
1.
2.
3.
4.
Select the Administrator Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press <Enter>.
From the Create New Password box, key in a new password, then press <Enter>.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator
password, but press <Enter> when prompted to create/confirm the password. After you clear
the password, the Administrator Password item on top of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a user password:
1.
2.
3.
Select the User Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
To change a user password:
1.
2.
3.
4.
Select the User Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press <Enter>.
From the Create New Password box, key in a new password, then press <Enter>.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
ASUS P8H77-M LE
2-11
2.4
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Exit
UEFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
[X.M.P.] When XMP is enabled BLCK
frequency, CPU ratio and memory
parameters will be auto optimized.
Target CPU Turbo-Mode Speed : 3700MHz
Target DRAM Speed : 1333MHz
CPU Bus speed : DRAM speed ratio mode
Memory Frequency
Auto
Auto
iGPU Max. Frequency
Auto
EPU Power Saving Mode
Disabled
>
>
>
>
GPU Boost
DRAM Timing Control
CPU Power Management
DIGI+ VRM
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
CPU Voltage
1.136V
Offset Mode
+
CPU Offset Mode Sign
CPU Offset Voltage
iGPU Voltage
Auto
Offset Mode
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Scroll down to display the following items:
iGPU Offset Mode Sign
+
→←: Select Screen
↑↓: Select Item
Enter: Select
iGPU Offset Voltage
DRAM Voltage
Auto
1.500V
0.925V
1.050V
Auto
Auto
Auto
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
VCCSA Voltage
PCH Voltage
CPU PLL Voltage
Auto
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
2.4.1
CPU bus speed : DRAM speed ratio mode [Auto]
Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto]
DRAM speed is set to the optimized settings.
[100:133]
[100:100]
The CPU bus speed to DRAM speed ratio is set to 100:133.
The CPU bus speed to DRAM speed ratio is set to 100:100.
2-12
Chapter 2: BIOS information
2.4.2
Memory Frequency [Auto]
Allows you to set the memory operating frequency. Configuration options: [Auto] [DDR3-
800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-1600MHz] [DDR3-1866MHz] [DDR3-
2133MHz] [DDR3-2400MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.4.3
iGPU Max. Frequency [Auto]
Use the <+> and <-> keys to adjust the value. The values range from 900MHz to 3000MHz
with a 50MHz interval.
2.4.4
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
EPU Setting [Auto]
This item appears only when you set the EPU Power Saving Mode item to [Enabled] and
allows you to select the EPU power saving mode. Configuration options: [Auto] [Light Power
Saving Mode] [Medium Power Saving Mode] [Max Power Saving Mode]
2.4.5
GPU Boost [OK]
[OK]
Select [OK] to automatically optimize the iGPU frequency.
Select [Cancel] to use a fixed iGPU frequency.
[Cancel]
2.4.6
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.4.7
CPU Power Management
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <-> keys or
the numeric keypad to adjust the value. The valid value ranges vary according to your CPU
model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).
[Disabled]
[Enabled]
Disables this function.
The operating system dynamically adjusts the processor voltage and
core frequency which may result in decreased average consumption and
decreased average heat production.
ASUS P8H77-M LE
2-13
Turbo Mode [Enabled]
This item appears only when you set the previous item to [Enabled].
[Enabled]
Allows processor cores to run faster than marked frequency in specific
conditions.
[Disabled]
Disables this function.
The following three items appear only when you set both the Enhanced Intel SpeedStep
Technology and Turbo Mode items to [Enabled].
Long Duration Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration power.
Use the <+> and <-> keys to adjust the value.
Long Duration Maintained [Auto]
Allows you to maintain the turbo ratio’s long duration power.
Use the <+> and <-> keys to adjust the value.
Short Duration Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration power.
Use the <+> and <-> keys to adjust the value.
Primary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for CPU cores
Use <+> and <-> key to adjust the value at 0.125A increment. .
Secondary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for Internal Graphics cores.
Use <+> and <-> key to adjust the value at 0.125A increment.
2.4.8
DIGI+ VRM
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel VRM specifications, and affects CPU voltage. The CPU working
voltage will decrease proportionally to CPU loading. Higher value gets a higher voltage, and
a better overclocking performance, but increases the CPU and VRM thermal conditions.
This item allows you to adjust the voltage range from the following percentages to boost the
system performance: 0% (Regular), 25% (Medium), 50% (High), 75% (Ultra High) and 100%
(Extreme). Configuration options: [Auto] [Regular] [Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specification.
CPU Fixed Frequency [xxx]
Allows you to set a fixed CPU frequency. Use the <+> and <-> keys to adjust the value. The
values range from 200k Hz to 350k Hz with a 50k Hz interval.
2-14
Chapter 2: BIOS information
CPU Power Phase Control [Standard]
Allows you to control the power phase based on the CPU’s demands. Configuration options:
[Standard] [Optimized] [Extreme] [Manual Adjustment]
DO NOT remove the thermal module when switching to Extreme and Manual Mode. The
thermal conditions should be monitored.
Manual Adjustment [Medium]
This item appears only when you set the previous item to [Manual Adjustment]. Select [Ultra
Fast] for a faster response. The reaction time will be longer when [Regular] is selected.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty control adjusts the current and thermal conditions of every component’s
phase.
[T. Probe]
[Extreme]
Select to maintain the VRM thermal balance.
Select to maintain the current VRM balance.
CPU Current Capability [100%]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [100%] [110%] [120%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
iGPU Load-line Calibration [Auto]
Allows you to set the iGPU Load-line Calibration. Configuration options: [Auto] [Regular]
[High] [Extreme]
iGPU Current Capability [100%]
Allows you to set the iGPU Current Capability. Configuration options: [100%] [110%] [120%]
Do not remove the thermal module while changing the DIGI+ VRM related parrameters .
The thermal conditions should be monitored.
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the <Enter>
key.
2.4.9
CPU Voltage [Offset Mode]
[Offset Mode]
To offset the voltage by a positive or negative value.
[Manual Mode] Allows you to set a fixed CPU voltage.
ASUS P8H77-M LE
2-15
CPU Offset Mode Sign [+]
This item appears only when you set the CPU Voltage item to [Offset Mode].
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Offset Voltage [Auto]
Allows you to set the CPU Offset voltage. The values range from 0.005V to 0.635V with a 0.005V
interval.
CPU Manual Voltage [Auto]
This item appears only when you set the CPU Voltage item to [Manual Mode] and allows you
to set a fixed CPU voltage. The values range from 0.800V to 1.990V with a 0.005V interval.
Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage
may damage the CPU permanently, and setting a low voltage may make the system
unstable.
2.4.10
iGPU Voltage [Offset Mode]
[Offset Mode]
To offset the voltage by a positive or negative value.
[Manual Mode] Allows you to set a fixed iGPU voltage.
iGPU Offset Mode Sign [+]
This item appears only when you set the iGPU Voltage item to [Offset Mode].
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
iGPU Offset Voltage [Auto]
Allows you to set the iGPU Offset voltage. The values range from 0.005V to 0.635V with a 0.005V
interval.
iGPU Manual Voltage [Auto]
This item appears only when you set the iGPU Voltage item to [Manual Mode] and allows
you to set a fixed iGPU voltage. The values range from 0.800V to 1.990V with a 0.005V
interval.
2.4.11
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.20V to 2.13V with a 0.01V
interval.
According to Intel CPU specification, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend you install the DIMMs with the voltage
requirement below 1.65V.
2.4.12
VCCSA Voltage [Auto]
Allows you to set the VCCSA voltage. The values range from 0.610V to 1.560V with a 0.005V
interval.
2.4.13
PCH Voltage [Auto]
Allows you to set the Platform Controller Hub voltage. The values range from 1.050V to
1.365V with a 0.05V interval.
2-16
Chapter 2: BIOS information
2.4.14
CPU PLL Voltage [Auto]
Allows you to set the CPU and PCH PLL voltage. Configuration options: [Auto] [+0.10V]
•
•
The values of the CPU Offset Voltage, CPU Manual Voltage, iGPU Offset Voltage,
iGPU Manual Voltage, DRAM Voltage, VCCSA Voltage, and PCH Voltage items are
labeled in different color, indicating the risk levels of high voltage settings.
The system may need better cooling system to work stably under high voltage settings.
2.5
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
Exit
UEFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
CPU configuration parameters
>
>
>
CPU Configuration
PCH Configuration
SATA Configuration
>
System Agent Configuration
USB Configuration
Onboard Devices Configuration
APM
>
>
>
>
Network Stack
2.5.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items shown in submenu may be different due to the CPU you installed.
Intel Adaptive Thermal Monitor [Enabled]
[Enabled]
[Disabled]
Enables the overheated CPU to throttle its clock speed to cool down.
Disables the CPU thermal monitor function.
ASUS P8H77-M LE
2-17
Hyper-threading [Enabled]
The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two
logical processors to the operating system, allowing the operating system to schedule two
threads or processes simultaneously.
[Enabled]
[Disabled]
Two threads per activated core are enabled.
Only one thread per activated core is enabled.
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2] [3]
Limit CPUID Maximum [Disabled]
[Enabled]
Allows legacy operating systems to boot even without support for CPUs
with extended CPUID functions.
[Disabled]
Disables this function.
Execute Disable Bit [Enabled]
[Enabled]
Enables the No-Execution Page Protection Technology.
Forces the XD feature flag to always return to zero (0).
[Disabled]
Intel® Virtualization Technology [Disabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Hardware Prefetcher [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Adjacent Cache Line Prefetch [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to perform adjacent cache line prefetching.
Disables this function.
CPU Power Management Configuration
CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use <+> and
<-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).
[Disabled]
[Enabled]
The CPU runs at its default speed.
The operating system controls the CPU speed.
Turbo Mode [Enabled]
This item appears only when you set the Enhanced Intel SpeedStep Technology item to
[Enabled] and allows you to enable or disable the Intel® Turbo Mode Technology.
[Enabled]
Allows processor cores to run faster than marked frequency in specific condition.
[Disabled]
Disables this function.
2-18
Chapter 2: BIOS information
CPU C1E [Auto]
Enables or disables the C1E support function. This item should be enabled in order to enable the
Enhanced Halt State. Configuration options: [Auto] [Enabled] [Disabled]
CPU C3 Report [Auto]
Allows you to disable or enable the CPU C3 report to OS. Configuration options: [Auto] [Enabled]
[Disabled]
CPU C6 Report [Auto]
Allows you to disable or enable the CPU C6 report to OS. Configuration options: [Auto] [Enabled]
[Disabled]
2.5.2
PCH Configuration
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Enabled] [Disabled]
Intel® Rapid Start Technology [Disabled]
Allows you to enable or disable the Intel(R) Rapid Start Technology.
Configuration options: [Enabled] [Disabled]
Intel® Smart Connect Technology [Disabled]
ISCT Configuration [Disabled]
Allows you to enable or disable the ISCT configuration. Configuration options: [Enabled] [Disabled]
2.5.3
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
SATA Mode Selection [IDE]
Allows you to set the SATA configuration.
[IDE]
Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI]
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
[RAID]
Set to [RAID] when you want to create a RAID configuration from the SATA
hard disk drives.
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
This item only appears when you set the SATA Mode Selection item to [AHCI] or [RAID]
and allows you to enable or disable the hot-plug support for each SATA port. Configuration
options: [Enabled] [Disabled]
ASUS P8H77-M LE
2-19
2.5.4
System Agent Configuration
Memory Remap Feature [Enabled]
[Enabled]
[Disabled]
Allow you to enable remapping the memory above 4GB.
Disables this function.
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device. Configuration
options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the iGPU.
Configuration options: [32M] [64M] [96M] [128M] ~ [416M] [448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power use
when idle. Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Enabled]
Allows you to enable the iGPU Multi-Monitor. For Lucid Virtu MVP function support, set this item to
[Enabled] to empower both integrated and discrete graphics. iGPU shared system memory size is
fixed in 64MB. Configuration options: [Disabled] [Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIE x16_1 speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
2.5.5
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Enables the support for USB devices on legacy operating systems (OS).
The USB devices can be used only for the BIOS setup program.
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]
This item appears only on P8Q67-M DO/USB3/TPM.
[Enabled]
Enables the support for USB 3.0 devices on legacy operating systems
(OS).
[Disabled]
Disables the function.
2-20
Chapter 2: BIOS information
Intel xHCI Mode [Smart Auto]
Allows you to select an operation mode for the Intel xHCI controller. Configuration options:
[Smart Auto] [Auto] [Enabled] [Disabled]
EHCI Hand-off [Disabled]
[Enabled]
Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled]
Disables the function.
2.5.6
Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
Enables the High Definition Audio Controller.
[Disabled]
Disables the controller.
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD]
Sets the front panel audio connector (AAFP) mode to high definition audio.
[AC97]
Sets the front panel audio connector (AAFP) mode to legacy AC’97
SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
Sets to [SPDIF] for SPDIF audio output.
Sets to [HDMI] for HDMI audio output.
Realtek LAN Controller [Enabled]
[Enabled]
[Disabled]
Enables the Realtek LAN controller.
Disables the controller.
Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to
enable or disable the PXE OptionRom of the Realtek LAN controller. Configuration options:
[Enabled] [Disabled]
2.5.7
APM
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
ASUS P8H77-M LE
2-21
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
[Power Key]
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PCIE/PCI [Disabled]
[Disabled]
[Enabled]
Disables the PCIE/PCI devices to generate a wake event.
Enables the PCIE/PCI devices to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
[Enabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
2.5.8
Network Stack
Network Stack [Disable Link]
This item allows user to disable or enable the UEFI network stack. Configuration options:
[Disable Link] [Enabled]
Ipv4 PXE Support [Enabled]
This item appears only when you set the Network Stack item to [Enabled]. When this item is
disabled, the IPV4 PXE boot option will not be created. Configuration options: [Disable Link]
[Enabled]
Ipv6 PXE Support [Enabled]
This item appears only when you set the Network Stack item to [Enabled]. When this item is
disabled, the IPV6 PXE boot option will not be created. Configuration options: [Disable Link]
[Enabled]
2-22
Chapter 2: BIOS information
2.6
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Exit
UEFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan Speed
CPU Voltage
+45ºC / +113ºF
+34ºC / +93ºF
3325 RPM
N/A
+1.184 V
3.3V Voltage
+3.312 V
5V Voltage
+5.080 V
12V Voltage
+12.192 V
→←: Select Screen
↑↓: Select Item
Enter: Select
CPU Q-Fan Control
Enabled
600 RPM
Standard
CPU Fan Speed Low Limit
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
CPU Fan Profile
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Chassis Q-Fan Control
Enabled
Chassis Fan Speed Low Limit
600 RPM
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Scroll down to display the following items:
Chassis Fan Profile
Standard
Enabled
Anti Surge Support
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
ASUS P8H77-M LE
2-23
2.6.1
CPU Temperature / MB Temperature [xxx�C/xxx�F]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignore if you do not wish to display the detected temperatures.
2.6.2
CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignore if you do not wish to display the detected speed.
2.6.3
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.
2.6.4
CPU Q-Fan Control [Enabled]
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control feature.
[Disabled]
[Enabled]
CPU Fan Speed Low Limit [600 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
disable or set the CPU fan warning speed.
Configuration options: [Ignore] [100 RPM] [200 RPM] [300 RPM] [400 RPM] [500 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the
appropriate performance level of the CPU fan.
[Standard]
Sets to [Standard] to make the CPU fan automatically adjust depending on the CPU
temperature.
[Silent]
[Turbo]
[Manual]
Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
Sets to [Turbo] to achieve maximum CPU fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Fan Profile to [Manual].
CPU Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range
from 20ºC to 75ºC.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from
20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at
the maximum duty cycle.
CPU Lower Temperature [20]
Use the <+> and <-> keys to adjust the lower limit of the CPU temperature. The values range
from 20ºC to 75ºC.
CPU Fan Min. Duty Cycle(%) [20]
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 0%
to 100%. When the CPU temperature is under 40ºC, the CPU fan will operate at the minimum
duty cycle.
2-24
Chapter 2: BIOS information
2.6.5
Chassis Q-Fan Control [Enabled]
Disables the Chassis Q-Fan control feature.
Enables the Chassis Q-Fan control feature.
[Disabled]
[Enabled]
Chassis Fan Speed Low Limit [600 RPM]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you
to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you to set
the appropriate performance level of the chassis fan.
[Standard]
Sets to [Standard] to make the chassis fan automatically adjust depending on the
chassis temperature.
[Silent]
[Turbo]
[Manual]
Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
Sets to [Turbo] to achieve maximum chassis fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Chassis Fan Profile to [Manual].
Chassis Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range
from 40ºC to 90ºC.
Chassis Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle. The values range
from 60% to 100%. When the chassis temperature reaches the upper limit, the chassis fan will
operate at the maximum duty cycle.
Chassis Lower Temperature [40]
Displays the lower limit of the chassis temperature.
CPU Fan Min. Duty Cycle(%) [60]
Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values range from
60% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the
minimum duty cycle.
2.6.6
Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function.
Configuration options: [Disabled] [Enabled]
ASUS P8H77-M LE
2-25
2.7
Boot menu
The Boot menu items allow you to change the system boot options.
Exit
UEFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Select the keyboard NumLock state
Bootup NumLock State
Full Screen Logo
On
Enabled
Enabled
Wait For ‘F1’ If Error
Option ROM Messages
Setup Mode
Force BIOS
EZ Mode
UEFI/Legacy Boot
PCI ROM Priority
Enabled both...
Legacy ROM
Boot Option Priorities
Boot Option #1
SATA: xxxxxxx
SATA: xxxxxxx
→←: Select Screen
↑↓: Select Item
Enter: Select
Boot Option #2
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
Boot Override
>
>
>
SATA: xxxxxxxxxxxx
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Hard Drive BBS Priorities
CD/DVD ROM Drive BBS Priorities
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
2.7.1
[On]
Bootup NumLock State [On]
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
[Off]
2.7.2
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Post Report [5 sec]
This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to
set the waiting time for the system to display the post report. Configuration options: [1 sec] [2
sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]
2.7.3
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2-26
Chapter 2: BIOS information
2.7.4
Option ROM Messages [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
2.7.5
Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
program.
[EZ Mode]
Sets EZ Mode as the default screen for entering the BIOS setup program.
2.7.6
UEFI/Legacy Boot [Enabled both UEFI and Legacy]
[Enable both UEFI and Legacy] Enables both UEFI and Legacy boot.
[Disable UEFI]
Enables the Legacy boot, and disables the UEFI boot.
Enables the UEFI booth, and disables the Legacy boot.
[Disable Legacy]
2.7.7
PCI ROM Priority [Legacy ROM]
[Legacy ROM]
Launch Legacy ROM
[EFI Compatibe ROM] Launch UEFI Compatible ROM
2.7.8
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
•
•
To select the boot device during system startup, press <F8> when ASUS Logo appears.
To access Windows OS in Safe Mode, press <F8> after POST.
2.7.9
Boot Override
These items displays the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.
ASUS P8H77-M LE
2-27
2.8
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
Exit
UEFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Be used to update BIOS
>
>
>
ASUS EZ Flash 2 Utility
ASUS O.C. Profile
ASUS SPD Information
2.8.1
ASUS EZ Flash 2 Utility
Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
For more details, see section 2.1.2 ASUS EZ Flash 2.
2.8.2
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
Label
Allows you to input the label of the setup profile.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press <Enter>, and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your CMOS settings, press <Enter>, and then select Yes.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the system
boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
2.8.3
ASUS SPD Information
DIMM Slot # [DIMM_A1]
Displays the Serial Presence Detect (SPD) information of the DIMM module installed on the
selected slot. Configuration options: [DIMM_A1] [DIMM_A2]
2-28
Chapter 2: BIOS information
2.9
Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Exit
Load Optimized Defaults
Save Changes & Reset
Discard Changes & Exit
ASUS EZ Mode
Launch EFI Shell from filesystem device
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Yes to load the default values.
Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved. When you select this option or if you press <F10>,
a confirmation window appears. Select Yes to save changes and exit.
Discard Changes & Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press <Esc>, a confirmation window appears. Select Yes to
discard changes and exit.
ASUS EZ Mode
This option allows you to enter the EZ Mode screen.
Launch EFI Shell from filesystem device
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available devices that have a filesystem.
ASUS P8H77-M LE
2-29
2-30
Chapter 2: BIOS information
Appendices
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference.
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS
210 of Industry Canada. This Class B device meets all the requirements of the Canadian
interference-causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer
un fonctionnement non souhaité de l’appareil.
ASUS P8H77-M LE
A-1
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly
recycle our products, batteries, other components as well as the packaging materials. Please
regions.
A-2
Appendices
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone
Fax
E-mail
Web site
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798
Technical Support
Telephone
Online support
+86-21-38429911
support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
800 Corporate Way, Fremont, CA 94539, USA
+1-510-739-3777
+1-510-608-4555
usa.asus.com
Web site
Technical Support
Telephone
Support fax
+1-812-282-2787
+1-812-284-0883
support.asus.com
Online support
ASUS COMPUTER GmbH (Germany and Austria)
Address
Harkort Str. 21-23, D-40880 Ratingen, Germany
Fax
Web site
Online contact
+49-2102-959911
Technical Support
Telephone
Support Fax
+49-1805-010923*
+49-2102-9599-11
support.asus.com
Online support
* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
|