Asus LCD Monitor PA279Q User Manual
PA279 Series  
LCD Monitor  
User Guide  
Notices  
Federal.Communications.Commission.Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
•
•
This device may not cause harmful interference, and  
This device must accept any interference received including interference that  
may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
•
•
•
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to which the  
receiver is connected.  
•
Consult the dealer or an experienced radio/TV technician for help.  
The use of shielded cables for connection of the monitor to the graphics card is  
required to assure compliance with FCC regulations. Changes or modifications  
to this unit not expressly approved by the party responsible for compliance could  
void the user’s authority to operate this equipment.  
As an Energy Star® Partner, our company has determined that this  
product meets the Energy Star® guidelines for energy efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
This Class B digital apparatus meets all requirements of the Canadian  
Interference - Causing Equipment Regulations.  
Cet appareil numérique de la classe B respecte toutes les exigences du  
Réglement sur le matériel brouiller du Canada.  
iii  
Safety information  
•
Before setting up the monitor, carefully read all the documentation that came  
with the package.  
•
•
To prevent fire or shock hazard, never expose the monitor to rain or moisture.  
Never try to open the monitor cabinet. The dangerous high voltages inside the  
monitor may result in serious physical injury.  
•
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified  
service technician or your retailer.  
Before using the product, make sure all cables are correctly connected and the  
power cables are not damaged. If you detect any damage, contact your dealer  
immediately.  
•
•
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or over a  
radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source indicated  
on the label. If you are not sure of the type of power supply to your home,  
consult your dealer or local power company.  
•
•
Use the appropriate power plug which complies with your local power standard.  
Do not overload power strips and extention cords. Overloading can result in fire  
or electric shock.  
•
•
•
•
Avoid dust, humidity, and temperature extremes. Do not place the monitor in  
any area where it may become wet. Place the monitor on a stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a long period  
of time. This will protect the monitor from damage due to power surges.  
Never push objects or spill liquid of any kind into the slots on the monitor  
cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked between  
100-240V AC.  
•
If you encounter technical problems with the monitor, contact a qualified  
service technician or your retailer.  
This symbol of the crossed out wheeled bin indicates that the product (electrical,  
electronic equipment, and mercury-containing button cell battery) should not  
be placed in municipal waste. Please check local regulations for disposal of  
electronic products.  
iv  
Care & Cleaning  
•
Before you lift or reposition your monitor, it is better to disconnect the cables  
and power cord. Follow the correct lifting techniques when positioning the  
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.  
Do not lift the display by the stand or the cord.  
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor  
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed  
with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended  
for use with the monitor. Never spray cleaner directly on the screen, as it may  
drip inside the monitor and cause an electric shock.  
The.following.symptoms.are.normal.with.the.monitor:  
•
You may find slightly uneven brightness on the screen depending on the  
desktop pattern you use.  
•
When the same image is displayed for hours, an afterimage of the previous  
screen may remain after switching the image. The screen will recover slowly or  
you can turn off the Power Switch for hours.  
•
When the screen becomes black or flashes, or cannot work anymore, contact  
your dealer or service center to fix it. Do not repair the screen by yourself!  
Conventions.used.in.this.guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components when trying  
to complete a task.  
IMPORTANT: Information that you MUST follow to complete a task.  
NOTE: Tips and additional information to aid in completing a task.  
v
Where.to.find.more.information  
Refer to the following sources for additional information and for product and  
software updates.  
1.. ASUS.websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2.. Optional.documentation  
Your product package may include optional documentation that may have  
been added by your dealer. These documents are not part of the standard  
package.  
vi  
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a broader, brighter and  
crystal-clear display, plus a host of features that enhance your viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings to you!  
1.2  
Package contents  
Check your package for the following items:  
LCD monitor  
Quick start guide  
Warranty card  
Power cord  
DVI-D cable (Dual Link)  
DisplayPort cable  
DisplayPort cable (Mini-DP to DP)  
USB 3.0 cable  
Support CD  
Cable tie  
Color Calibration Testing Report  
Hood  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS PA279 Series LCD Monitor  
1-1  
 
1.3  
Monitor introduction  
1.3.1.  
Front.view  
1
2
3
4
5
6
7
1.  
QuickFit button:  
•
Activates the QuickFit function designed for alignment.  
•
The QuickFit function contains 7 pages of common grid patterns and paper  
and photo sizes. (Please refer to 1.3.3 QuickFit Function).  
•
•
Enacts the selected OSD menu item.  
Increases/Decreases values or moves your selection up/down/left/right.  
2.  
MENU button:  
•
•
Turns on the OSD menu.  
Exits the OSD menu or goes back to the previous menu when the OSD  
menu is active.  
•
•
Exits the QuickFit patterns.  
Toggles the Key Lock function between on and off with a long press for  
5 seconds.  
The OSD menu is not available when the QuickFit function is in use.  
1-2  
Chapter 1: Product introduction  
 
3.  
4.  
Shortcut  
•
•
Default: Brightness hotkey  
To change the hotkey function, go to the Shortcut > Shortcut 1 menu.  
Shortcut  
•
•
Default: Contrast hotkey  
To change the hotkey function, go to the Shortcut > Shortcut 2 menu.  
5.  
6.  
button:  
•
•
Selects a desired preset mode.  
button:  
Selects an available input source.  
Press  
button (Input Select button) to display HDMI/DisplayPort  
signals after you connect HDMI/DisplayPort cable with the monitor  
.
7.  
Power button/power indicator  
•
•
Turns the monitor on/off.  
The color definition of the power indicator is as the below table.  
Status  
Description  
White  
Amber  
Off  
On  
Standby mode  
Off  
ASUS PA279 Series LCD Monitor  
1-3  
 
1.3.2.  
Back.view  
3
11  
11  
1
2
4 5  
6
7
8
9
10  
12  
11  
Rear.connectors  
1.. Kensington.lock.slot.  
2.. Power.switch. Press the switch to turn on/off power.  
3.. AC-IN.port. This port connects the power cord.  
4.. Audio-in.port. This port connects PC audio source by the bundled audio  
cable.  
5.. Earphone.jack.  
6.. DisplayPort.in. This port is for connection with your computer.  
7.. DVI.port. This 24-pin port is for PC (Personal Computer) DVI-D digital signal  
connection.  
8.. HDMI.port. This port is for connection with an HDMI compatible device.  
9.. DisplayPort.out. This port allows you to connect multiple DisplayPort compatible  
monitors.  
10.. USB.3.0.upstream.port. This port is for connection with a USB upstream cable.  
The connection enables the USB ports on the monitor.  
11.. USB.3.0.downstream.ports. These ports are for connection with USB devices,  
such as USB keyboard/mouse, USB flash drive, etc.  
This monitor is Super-Speed USB 3.0 compatible. Port with  
BC1.2 compliant  
icon is  
.
12.. Card.reader. See below for more information about the card reader  
specifications.  
1-4  
Chapter 1: Product introduction  
Card.reader.specifications  
•
•
•
Support Ssecure DigitalTM v1.0 / v1.1 / v2.0/ SDHC / SDXC (Capacity up to  
2TB)  
Support Secure DigitalTM v3.0 UHS-I (Ultra High Speed): SDR12/SDR25/  
SDR50/DDR50/SDR104  
Compliant with MultiMediaCard TM (MMC)  
- MMC specification v3.x / v4.0 / v4.1 / v4.2 / v4.3 / v4.4  
- x1 / x4  
•
•
Support Memory Stick PRO / Memory Stick PRO Duo / Memory Stick Micro /  
Memory  
Stick PRO-HG / Memory Stick XC (Capacity up to 32GB)  
- Compliant with Memory Stick Series Specification: MS v1.43, MS PRO  
v1.05, MS Micro v1.04 (MS HG Micro v1.00), MS PRO-HG Duo 1.03, MS XC  
Duo v1.00, MS XC-HG Duo v1.00, MS XC Micro v1.00 and MS XC-HG Micro  
v1.00  
- Support Read/Write quad data access (512Bytex4) for MS PRO-HG to  
enhance the transmission rate  
1.3.3.  
QuickFit.Function  
The QuickFit function contains three kinds of patterns: (1) Grid patterns (2) Paper  
size (3) Photo size. To activate the patterns, press the QuickFit button. Press the  
button again until a desired pattern is selected. You can move the button up/down/  
left/right to change the pattern’s position if needed. Note that all the patterns can  
be moved left/right accroding to your need, but may have limited range for moving  
up/down.  
1.  
Grid patterns  
The grid patterns facilitate designers and users to organize content and layout on a  
page and achieve a consistent look and feel.  
Centimeters  
Inches  
ASUS PA279 Series LCD Monitor  
1-5  
 
Alignment Grid  
2.  
Paper size  
QuickFit provides numerous commonly used standard paper sizes for users to view  
their documents in real size on the screen.  
A4  
Letter  
3.  
Photo size  
The various real photo sizes displayed in the QuickFit function provides  
photographers and other users to accurately view and edit their photos in real size  
on the screen.  
Photo 4x6, 3x5, 2x2  
Photo 8x10, 5x7  
1-6  
Chapter 1: Product introduction  
2.1  
Detaching the arm/base  
(for VESA wall mount)  
The detachable arm/base of this monitor is specially designed for VESA wall  
mount.  
To detach the arm/base:  
1.  
2.  
Have the front of the monitor face down on a table.  
Use a screwdriver to remove the four screws on the arm (Figure 1), and then  
detach the arm/base from the monitor (Figure 2).  
(Figure 2)  
(Figure 1)  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
ASUS PA279 Series LCD Monitor  
1
 
2.2  
Adjusting the monitor  
•
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable for you.  
•
•
Hold the stand to prevent the monitor from falling when you change its angle.  
You can adjust the monitor’s angle from +20˚ to -5˚, and it allows 60˚ swivel  
adjustment from either left or right. You can also adjust the monitor’s height  
within +/- 130 mm.  
(Tilt)  
(Swivel)  
(Height adjustment)  
+20° ~ -5°  
130mm  
60°  
60°  
0°  
Pivoting.the.monitor  
1. Lift the monitor to the highest position.  
2. Tilt the monitor to its maximum angle.  
3. Pivot the monitor clockwise to the angle you need.  
+20° ~ -5°  
It is normal that the monitor slightly shakes while you adjust the viewing angle.  
2-2  
Chapter 2: Setup  
 
2.3  
Connecting the cables  
1.  
Connect the cables as the following instructions:  
•. To.connect.the.power.cord: connect one end of the power cord securely to  
the monitor’s AC input port, the other end to a power outlet.  
•. To.connect.the.HDMI/DVI/DisplayPort.cable:  
a. Plug one end of the HDMI/DVI/DisplayPort cable to the monitor’s HDMI/  
DVI/DisplayPort jack.  
b. Connect the other end of the HDMI/DVI/DisplayPort cable to your  
computer's HDMI/DVI/DisplayPort jack.  
c. Tighten the two screws to secure the DVI connector.  
•. To.use.the.earphone: connect the end with plug type to the monitor’s  
earphone jack when an HDMI or DisplayPort signal is fed.  
•. To.use.the.USB.3.0.ports: Take the supplied USB 3.0 cable, and plug  
the smaller end (type B) of the USB upstream cable to the monitor’s USB  
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.  
Make sure your computer is installed with the lastest Windows 7/Windows 8  
operating system. That will enable the USB ports on the monitor to work.  
When these cables are connected, you can choose the desired signal  
from the Input Select item in the OSD menu.  
2.4  
Turning on the monitor  
Press the power button  
. See page 1-2 for the location of the power button. The  
power indicator lights up in white to show that the monitor is ON.  
ASUS PA279 Series LCD Monitor  
2-3  
 
2-4  
Chapter 2: Setup  
3.1  
OSD (On-Screen Display) menu  
3.1.1.  
How.to.reconfigure  
1.  
2.  
Press the MENU button to activate the OSD menu.  
Move the  
button up/down to navigate through the functions. Highlight  
the desired function and press the  
selected has a sub-menu, move the  
button to activate it. If the function  
button up/down to navigate through  
the sub-menu functions. Highlight the desired sub-menu function and press  
the button to activate it.  
Move the button left/right to change the settings of the selected function.  
3.  
4.  
To exit and save the OSD menu, press the MENU button repeatedly until the  
OSD menu disappears. To adjust other functions, repeat steps 1-3.  
3.1.2.  
OSD.function.introduction  
1.. Splendid  
This function contains 7 sub-functions you can select for your preference.  
Each mode has the Reset selection, allowing you to maintain your setting or  
return to the preset mode.  
•.  
•.  
Standard.Mode: best choice for document editing with SPLENDID™  
Video Enhancement.  
sRGB.Mode: compatible with sRGB color space, sRGB mode is the best  
choice for document editing.  
ASUS PA279 Series LCD Monitor  
3-1  
 
Color  
Space  
White Point  
Xw Yw  
Primaries  
Xr  
Yr  
Xg  
Yg  
Xb  
Yb  
sRGB 0.3127 0.329  
0.64  
0.33  
0.3  
0.6 0.15 0.06  
•.  
Adobe.RGB.Mode: compatible with Adobe RGB color space.  
Color  
Space  
White Point  
Xw Yw  
Primaries  
Xg Yg  
Xr  
Yr  
Xb  
Yb  
Adobe.  
RGB  
0.3127 0.329 0.64 0.33 0.21 0.71 0.15  
0.06  
•.  
•.  
•.  
Scenery.Mode:.best choice for scenery photo display with SPLENDID™  
Video Enhancement.  
Theater.Mode: best choice for movies with SPLENDID™ Video  
Enhancement.  
User.Mode.1/User.Mode.2: More items are adjustable in the Color menu.  
3-2  
Chapter 3: OSD (On-Screen Display) menu