April 2012
VE278 Series
LCD Monitor
User Guide
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
As an Energy Star® Partner, our company has determined that this
product meets the Energy Star® guidelines for energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iii
Safety information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
•
•
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
•
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
iv
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the LCD. Never spray cleaner directly on the screen, as it may drip
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
v
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
2.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
vi
1.1
Welcome!
Thank you for purchasing the ASUS® VE278 Series LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the VE278 Series brings you!
1.2
Package contents
Check your VE278 Series LCD package for the following items:
LCD monitor
Monitor base
Quick start guide
warranty card
1 x Power cord
1 x VGA cable
1 x DVI cable(only for VE278N)
1 x HDMI-DVI cable (only for VE278H)
1 x Audio cable(only for VE278H)
If any of the above items is damaged or missing, contact your retailer
immediately.
ASUS LCD Monitor VE278 Series
1-1
1.3
Assembling the monitor base
To assemble the monitor base:
1.
2.
Attach the base to the arm and fix with the screw to join them tightly. You can
easily tighten the screw by fingers.
Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2
1
Make sure to screw the base to the arm tightly.
1.4
Connect cables
To connect cables:
Connect the cables you need based on chapter 1.5.2, page1-5.
1-2
Chapter 1: Product Introduction
1.5
Monitor introduction
1.5.1
Front of the LCD monitor
VE278H
VE278N
1
2
2
4
3
5
5
6
6
7
7
8
8
1
1.
Button:
•
Automatically adjust the image to its optimized position, clock, and
phase by long pressing this button for 2-4 seconds (for VGA mode only).
•
•
Use this hotkey to switch from six video preset modes (Scenery Mode,
Standard Mode, Theater Mode, Game Mode, Night View Mode, and
sRGB Mode) with SPLENDID™ Video Intelligence Technology.
Exit the OSD menu or go back to the previous menu as the OSD menu
is active.
2.
QuickFit Button:
•
This is a hotkey to activate the QuickFit function designed for alignment.
•
The QuickFit function contains 7 pages of common grid patterns, paper
sizes, and photo sizes.
3.
Button:
•
Press this button to decrease the value of the function selected or move
to the next function.This is also a hotkey for Contrast adjustment.
ASUS LCD Monitor VE278 Series
1-3
4.
Button:
•
Press this button to decrease the value of the function selected or move
to the next function.This is also a hotkey for Volume adjustment.
5.
MENU Button:
•
•
Press this button to enter the OSD menu.
Press this button to enter/select the icon (function) highlighted while the
OSD is activated.
6.
Button:
•
•
Press this button to increase the value of the function selected or move
to the previous functions.
This is also a hotkey for Brightness adjustment.
7.
8.
Input Select Button:
•
Use this hotkey to switch from VGA, DVI(VE278N),HDMI(VE278H) input
signal.
Power Button/Power Indicator:
•
•
Press this button to turn the monitor on/off.
The color definition of the power indicator is as the below table.
Status
Blue
Description
ON
Amber
OFF
Standby mode
OFF
1-4
Chapter 1: Product Introduction
1.5.2
Rear of the LCD monitor
7
VE278H
VE278N
1
1
2
4
3
5
6
4
1
2
3
4
5
6
7
AC-IN port
HDMI port
DVI port
VGA port
Audio - in Port
Earphone - out Port
Screw Holes for VESA Wall Mount
ASUS LCD Monitor VE278 Series
1-5
1.5.3
QuickFit Function
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3) Photo
size.
1. Grid patterns
The grid patterns facilitate designers and users to organize content and layout on a
page and achieve a consistent look and feel.
Alignment Grid
2. Paper size
QuickFit provides numerous commonly used standard paper sizes for users to
view their documents in real size on the screen.
Letter
1-6
Chapter 1: Product Introduction
3. Photo size
The various real photo sizes displayed in the QuickFit function provides
photographers and other users to accurately view and edit their photos in real size
on the screen.
Photo 4x6, 3x5, 2x2
Photo 8x10, 5x7
ASUS LCD Monitor VE278 Series
1-7
2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VE278 Series LCD monitor is specially designed for
VESA wall mount.
To detach the arm/stand:
1.
2.
3.
Disconnect power and signal cables. Carefully put the front of the monitor
face down on a clean table.
Use a screwdriver to remove the two screws that secure the stand to the
monitor.
Detach the stand from the monitor.
•
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the stand of the monitor while removing the screws.
•
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load
24.4kg (Screw size: 4 x 10 mm).
2-1
Chapter 2: Setup
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
•
•
Hold the stand to prevent the monitor from falling while changing its angle.
You can adjust the monitor’s angle from -5˚ to 20˚.
-5 ~ 20
ASUS LCD Monitor VE278 Series
2-2
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
VE278
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Input Select
System Setup
Night View Mode
sRGB
Move
Menu
Exit
1.
2.
Press the MENU button to activate the OSD menu.
Press and to navigate through the functions. Highlight and activate
the desired function by pressing the MENU button. If the function selected
has a sub-menu, press and again to navigate through the sub-menu
functions. Highlight and activate the desired sub-menu function by pressing
the MENU button.
3.
4.
Press and to change the settings of the selected function.
To exit the OSD menu, press the
to adjust any other function.
button. Repeat step 2 and step 3
3.1.2
OSD Function Introduction
1.
Splendid
This function contains six sub-functions that you can select for your
preference. Each mode has the Reset selection, allowing you to maintain
your setting or return to the preset mode.
3-1
Chapter 3: General Instruction
VE278
Splendid
Color
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Image
Input Select
System Setup
Night View Mode
sRGB
Move
Menu
Exit
•
•
•
•
•
Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Intelligence Technology.
Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence Technology.
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
Game Mode: This is the best choice for game playing with SPLENDID™
Video Intelligence Technology.
Night View Mode: This is the best choice for playing dark-scene game
or watching dark-scene movie with SPLENDID™ Video Intelligence
Technology.
•
sRGB: This is the best choice for viewing photos and graphics from PCs.
In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR
functions are not user-configurable.
In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,
Contrast and ASCR functions are not user-configurable.
2.
Color
Select the image color you like from this function.
VE278
Splendid
Color
Brightness
Contrast
90
80
Image
Saturation
Color Temp.
50
User Mode
Input Select
System Setup
Skin Tone
Natural
OFF
Smart View
Move
Menu
Exit
•
Brightness: The adjusting range is from 0 to 100. The
button is
also a hotkey to activate this function.
ASUS LCD Monitor VE278 Series
3-2
•
Contrast: The adjusting range is from 0 to 100. The
button (Only
for VE278N) is also a hotkey to activate this function.
•
•
Saturation: The adjusting range is from 0 to 100.
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and one User Mode.
•
•
Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
Smart view: The versatile viewing positions with Smart View Technology
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
userconfigurable; the adjusting range is from 0 ~ 100.
3. Image
You can adjust the image Sharpness, Trace Free(Only for VE278H ), Aspect
Control, ASCR, Position (VGA only), and Focus (VGA only) from this main
function.
VE278
Splendid
Color
Sharpness
Trace Free
40
60
Image
Aspect Control
ASCR
Full
OFF
Input Select
System Setup
Position
Focus
Move
Menu
Exit
•
•
•
•
•
Sharpness: Adjusts the picture sharpness. The adjusting range is from 0
to 100.
Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100. (Only for VE278H)
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”,“Overscan”.
(Overscan is available only for VE278H HDMI source)
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
3-3
Chapter 3: General Instruction
•
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one horizontal
sweep. If the frequency is not correct, the screen shows vertical stripes and the
image is not proportional.
4.
Input Select
Select the input source from VGA, DVI.(VE278N)
VE278
Splendid
Color
VGA
DVI
Image
Input Select
System Setup
Move
Menu
Exit
Select the input source from VGA, HDMI1,HDMI2.(VE278H)
VE278
Splendid
Color
VGA
HDMI1
HDMI2
Image
Input Select
System Setup
Move
Menu
Exit
ASUS LCD Monitor VE278 Series
3-4
5.
System Setup
Adjusts the system configuration.
VE278
Splendid
Color
Splendid Demo Mode
OFF
Volume
50
Image
ECO Mode
OSD Setup
OFF
Input Select
System Setup
Language
English
Information
1/2
Move
Menu
Exit
VE278
Splendid
Color
All Reset
Image
Input Select
System Setup
2/2
Move
Menu
Exit
•
•
Splendid Demo Mode: Activate the demo mode for the Splendid
function.
Volume: Adjust the earphone or speaker output volume level. The
adjusting range is from 0 to 100.(Only for VE278H.)
•
•
ECO Mode: Activate the ecology mode for power saving.
OSD Setup: Adjusts the horizontal postition (H-Position), vertical position
(V-Position), OSD Timeout, DDD/CI, and Transparency of the OSD
screen.
•
Language: Select OSD language. The selections for Non-EU and Non-
US version OSD are: English, Traditional Chinese , Simplified Chinese,
Japanese , Persian, Thai and Indonesian; The selections for EU and
US version OSD are: English, German, Italian, French, Dutch, Spanish,
Russian, Poland, Turkey, Portugal, Czech, Croatia, Hungary, Romania
•
•
Information: Displays the monitor information.
All Reset: Selects “Yes” to revert all settings to the factory default mode.
3-5
Chapter 3: General Instruction
3.2
Specifications
Model
Panel Size
VE278N VE278H
27.0”W (68.6cm)
Max. Resolution
Brightness (Typ.)
Intrisinc Contrast Ratio (Typ.)
Viewing Angle (CR≤10)
Display Colors
1920x1080
300cd/m2
1200:1
160°(V) ; 170°(H)
16.7 M(6bit Hi FRC)
Response Time (Typ.)
DVI input
5 ms (Tr+Tf)
2 ms (Gray to Gray)
No
DVI with HDCP
D-Sub input
Yes
HDMI input
No
38W
No
Yes
45W
Yes
Yes
Power ON Consumption
Spk
Earphone
No
Power saving mode
Power off mode
Tilt
< 0.5W
< 0.5W
-5° ~ +20°
VESA Wall Mounting
Phys. Dimension (WxHxD)
Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
Yes (100mm x 100mm)
643x445.6x220
732x176x560
6.0 kg
9.2 kg
AC 100~240V(Built-in)
*Specifications are subject to change without notice.
ASUS LCD Monitor VE278 Series
3-6
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
Press the
ON mode.
Check if the power cord is properly connected to the
monitor and the power outlet.
The power LED lights amber and
there is no screen image
•
•
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly
•
•
Press the
button for two seconds to
automatically adjust the image.
Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy
•
Press the
button for two seconds to
automatically adjust the image (for VGA mode only).
Adjust the Phase and Clock settings via OSD.
Make sure the audio cable is properly connected to
the monitor.
•
•
No sound or sond is low(Only for
VE278H)
•
•
Adjust the volume settings of both your monitor and
computer.
Make sure the computer sound card driver is
properly installed and activated.
ASUS LCD Monitor VE278 Series
3-7
3.4
Supported Timing List
VESA / IBM Modes Support Timing (D-SUB, DVI-D, VE278H HDMI inputs)
Resolution
640 x 350
640 x 480
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
Refresh Rate
70Hz
60Hz
67Hz
75Hz
70Hz
56Hz
60Hz
72Hz
75Hz
60Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
60Hz
75Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Horizontal Frequency
31.469KHz
31.469KHz
35KHz
37.5KHz
31.469KHz
35.156KHz
37.879KHz
48.077KHz
46.875KHz
31.02KHz
48.363KHz
56.476KHz
60.023KHz
67.5KHz
44.772KHz
49.702KHz
60KHz
63.981KHz
79.976KHz
47.712KHz
55.935KHz
65.29KHz
64.674KHz
67.5KHz
800 x 600
848 x 480
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 960
1280 x 1024
1280 x 1024
1366 x 768
1440 x 900
1680 x 1050
1680 x 1050
1920 x 1080
1920 x 1080
66.587KHz
HDMI 1.3 CEA-861 Formats Supported Timing (for VE278H HDMI input)
Resolution
640 x 480P
720 x 480P
Refresh Rate
59.94 / 60Hz
59.94 / 60Hz
50Hz
Horizontal Frequency
31.469 / 31.5KHz
31.469 / 31.5KHz
31.25KHz
720 x 576P
1280 x 720P
1280 x 720P
1440 x 480P
1440 x 576P
1920 x 1080i
1920 x 1080i
1920 x 1080P
1920 x 1080P
50Hz
37.5KHz
59.94 / 60Hz
59.94 / 60Hz
50Hz
50Hz
59.94 / 60Hz
50Hz
44.955 / 45KHz
31.469 / 31.5KHz
31.25KHz
28.125KHz
33.716 / 33.75KHz
56.25KHz
59.94 / 60Hz
67.433 / 67.5KHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.
ASUS LCD Monitor VE278 Series
3-8
|