Z87-DELUXE
Contents
About this guide........................................................................................................ vii
Z87-DELUXE specifications summary ..................................................................... ix
Installation tools and components.......................................................................... xv
1.1 Special features..........................................................................................1-1
Motherboard overview...............................................................................1-6
Building your PC system...........................................................................2-1
BIOS update utility...................................................................................2-12
iii
Starting up for the first time....................................................................2-17
Turning off the computer.........................................................................2-18
Knowing BIOS............................................................................................3-1
BIOS setup program..................................................................................3-2
My Favorites...............................................................................................3-6
Main menu ..................................................................................................3-7
Ai Tweaker menu........................................................................................3-9
Advanced menu .......................................................................................3-25
Monitor menu ...........................................................................................3-39
Boot menu ................................................................................................3-42
Tools menu ...............................................................................................3-48
Exit menu..................................................................................................3-50
Updating BIOS..........................................................................................3-51
Support DVD information..........................................................................4-1
iv
Software information.................................................................................4-3
RAID configurations ..................................................................................5-1
Creating a RAID driver disk.......................................................................5-7
Notices .................................................................................................................... A-1
v
Safety information
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
•
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
•
•
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
vi
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports. It includes description of the switches, jumpers, and connectors on the
motherboard.
•
•
•
•
Chapter 2: Basic installation
This chapter lists the hardware setup procedures that you have to perform when
installing system components.
Chapter 3: BIOS setup
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
Chapter 4: Software support
This chapter describes the contents of the support DVD that comes with the
motherboard package and the software.
Chapter 5: RAID support
This chapter describes the RAID configurations.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
2.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
vii
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Italics
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
viii
Z87-DELUXE specifications summary
CPU
LGA1150 socket for the 4th Generation Intel® Core™ i7/Intel®
Core™ i5/ Intel® Core™ i3, Pentium® and Celeron® processors
Supports 22nm CPU
Supports Intel® Turbo Boost Technology 2.0*
*
The Intel® Turbo Boost Technology 2.0 support depends on the CPU
types.
Chipset
Memory
Intel® Z87 Express Chipset
4 x DIMM, max. 32GB, DDR3 2800 (O.C.)* / 2666 (O.C.)* 2600
(O.C.) / 2500 (O.C.) / 2400 (O.C.)* / 2200(O.C.) / 2133(O.C.) / 2000
(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz, non-ECC,
un-buffered memory
Dual channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
*
Hyper DIMM support is subject to the physical characteristics of
individual CPUs. Please refer to Memory QVL (Qualified Vendors List)
for details.
Expansion slots
2 x PCI Express 3.0 x16 slots (single at x16 or dual at x8/x8 mode)
1 x PCI Express 2.0 x16 slot (max. at x4 mode, compatible with
PCIe x1 and x4 devices)
4 x PCI Express 2.0 x1 slots
VGA
Integrated Graphics Processor - Intel® HD Graphics support
Multi-VGA output support: DisplayPort/Mini DisplayPort/HDMI port
Supports DisplayPort 1.2* with max. resolution of 4096 x
2160 @24Hz / 3840 x 2160 @60Hz (for DisplayPort and Mini
DisplayPort)
Supports HDMI with max. resolution of 4096 x 2160 @24Hz /
2560 x 1600 @60Hz
Supports Intel® InTru™ 3D, Intel® Quick Sync Video, Intel® Clear
Video HD Technology, and Intel® Insider™
Supports up to three displays simultaneously
Maximum shared memory 1024MB
*
DisplayPort 1.2 Multi-Stream Transport compliant; supports
DisplayPort 1.2 monitor daisy-chain up to 3 displays
Multi-GPU support
LAN
Supports NVIDIA® Quad-GPU SLI™ Technology (with 2 PCIe x16
graphics cards)
Supports AMD® 3-WAY/Quad-GPU CrossFireX™ Technology
Dual Gigabit LAN controllers—802.3az Energy Efficient Ethernet
(EEE) appliance
-
-
Intel® I217-V Gigabit LAN - Dual interconnect between the
integrated LAN controller and physical layer (PHY)
Realtek® 8111GR Gigabit LAN controller
Wireless Data Network
Speedy Wi-Fi 802.11 a/b/g/n/ac supports dual frequency band 2.4/5
GHz
ASUS Wi-Fi GO! Utility
*
The Wi-Fi standard of 802.11ac will be restricted by countries’
regulations. Wi-Fi 802.11ac feature will be supported under the complete
11ac eco-system environment.
(continued on the next page)
ix
Z87-DELUXE specifications summary
Bluetooth
Bluetooth v4.0
Bluetooth v3.0 + HS
Intel® Z87 Express Chipset with RAID 0, 1, 5, 10 and
Intel® Rapid Storage Technology 12 support
Storage
-
-
6 x SATA 6.0 Gb/s ports (yellow)
Supports Intel® Dynamic Storage Accelerator, Intel® Smart
Response Technology, Intel® Rapid Start Technology, Intel®
Smart Connect Technology*
ASMedia® SATA 6Gb/s controllers**
4 x SATA 6Gb/s ports (dark brown)
-
*
These functions will work depending on the CPU installed.
** These SATA ports are for data hard drives only. ATAPI devices are not
supported.
Audio
Realtek® ALC1150 8-channel high definition audio CODEC
-
High quality 112dB SNR stereo playback output (Line-out at
rear) and 104dB SNR recording input (Line-in) support.
-
-
-
-
-
Absolute Pitch 192khz/24bit True BD Lossless Sound
BD audio layer content protection
DTS UltraPC II
DTS Connect
Supports jack-detection, multi-streaming and front panel jack-
retasking
-
Optical S/PDIF out ports at rear I/O
Intel® Z87 Express Chipset - supports ASUS USB 3.0
Boost
USB
-
-
-
2 x USB 3.0/2.0 ports at mid-board for front panel support
2 x USB 3.0/2.0 ports at rear panel (blue)
8 x USB 2.0/1.1 ports (4 ports at mid-board, 4 ports at rear
panel)
ASMedia® USB 3.0 controllers - supports ASUS USB
3.0 Boost
-
4 x USB 3.0/2.0 ports at rear panel (blue)
ASUS unique features
ASUS Dual Intelligent Processors 4 with 4-Way
Optimization
-
4-Way Optimization tuning key perfectly consolidates
ASUS-exclusive DIGI+Power Control, TPU, EPU, and Fan
Xpert 2 that quickly optimize the digital power setting, system
performance, power saving and whole system cooling
configuration with just a click.
CPU Power
-
-
Industry leading digital 16-phase power design
ASUS CPU power utility
(continued on the next page)
x
Z87-DELUXE specifications summary
ASUS unique features
DRAM Power
-
-
Industry leading digital 2-phase DRAM power design
ASUS DRAM power utility
ASUS EPU
-
EPU, EPU switch
ASUS TPU
-
Auto Tuning, TurboV, GPU Boost, TPU switch
ASUS Fan Xpert 2
-
Featuring Fan Auto Tuning function for optimized speed
control, providing an exclusive tailored fan speed setting for
each fan.
ASUS Wi-Fi GO!
-
Wi-Fi GO! functions include Cloud GO!, DLNA Media Hub,
Smart Sensor Control, Remote Desktop, Remote Keyboard &
Mouse, File Transfer, Capture & Send
-
-
Wi-Fi GO! & NFC Remote for portable Smartphone/Tablet,
supporting iOS and Android systems.
Wi-Fi Engine’s Client and AP modes for network sharing and
connection.
ASUS Exclusive Features:
-
-
-
-
-
-
-
-
Network iControl
USB 3.0 Boost featuring speedy USB 3.0 transmission
USB Charger+
Ai Charger+
Disk Unlocker
AI Suite 3
Anti Surge
MemOK!
ASUS Quiet Thermal Solution:
ASUS Fanless Design: Heat-pipe solution
-
ASUS EZ DIY
-
-
-
-
-
ASUS USB BIOS Flashback
ASUS UEFI BIOS EZ Mode
ASUS O.C. Tuner
ASUS CrashFree BIOS 3
ASUS EZ Flash 2
ASUS Q-Design
-
-
-
-
-
-
ASUS Q-Code (4-digit display)
ASUS Q-Shield
ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)
ASUS Q-Slot
ASUS Q-DIMM
ASUS Q-Connector
(continued on the next page)
xi
Z87-DELUXE specifications summary
ASUS exclusive
overclocking features
Precision Tweaker 2
-
-
-
vCore: Adjustable CPU Core voltage at 0.001V increment
iGPU: Adjustable CPU Graphics voltage at 0.001V increment
vCCIO: Adjustable Analog and Digital I/O voltage at 0.001V
increment
-
-
vCCIN: Adjustable CPU Input voltage at 0.01V increment
vCCSA: Adjustable CPU System Agent voltage at 0.001V
increment
-
-
vDRAM Bus: 144-step Memory voltage control
vPCH: 88-step Chipset voltage control
SFS (Stepless Frequency Selection)
-
BCLK/PCIE frequency tuning from 80MHz up to 300MHz at
0.1MHz increment
Overclocking Protection
ASUS C.P.R.(CPU Parameter Recall)
-
Back Panel I/O Ports
1 x DisplayPort
1 x Mini DisplayPort
1 x HDMI port
2 x ASUS Wi-Fi GO! SMA antenna ports (2T2R) (Wi-Fi 802.11
a/b/g/n/ac and Bluetooth v4.0/3.0+HS)
1 x Optical S/PDIF Out port
2 x LAN (RJ-45) ports (1 x Intel® LAN)
6 x USB 3.0/2.0 ports (blue, 1 supports USB BIOS Flashback)
4 x USB 2.0/1.1 ports
1 x USB BIOS Flashback button
8-channel Audio I/O ports
Internal I/O connectors
1 x 19-pin USB 3.0/2.0 connector supports additional 2 USB ports
2 x USB 2.0/1.1 connectors support additional 4 USB ports
10 x SATA 6.0 Gb/s connectors (6 x yellow; 4 x dark brown)
1 x 4-pin CPU Fan connector supports both 3-pin (DC mode) and
4-pin (PWM mode) CPU coolers control
1 x 4-pin CPU Optional Fan connector (CPU_OPT)
4 x 4-pin Chassis Fan connectors
1 x Front panel audio connector (AAFP)
1 x S/PDIF out header
1 x TPM connector
1 x 24-pin EATX Power connector
1 x 8-pin EATX 12V Power connector
(continued on the next page)
xii
Z87-DELUXE specifications summary
Internal I/O connectors
1 x System Panel (Q-Connector)
1 x MemOK! button
1 x Clear CMOS button
1 x DirectKey button
1 x DRCT (DirectKey) connector
1 x EPU switch
1 x TPU switch (advanced two-stage adjustments)
1 x Power-on switch
1 x Reset switch
BIOS features
64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.0, WfM 2.0, SM
BIOS 2.5, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2,
ASUS CrashFree BIOS 3, My Favorites, Quick Note, Last Modified
Log, F12 PrintScreen function, F3 Shortcut functions, and ASUS
DRAM SPD (Serial Presence Detect) memory information
Manageability
WfM 2.0, DMI 2.0, WOL by PME, PXE
Support DVD contents
Drivers
ASUS Utilities
ASUS Update
Anti-virus software (OEM version)
Form factor
ATX form factor: 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
Specifications are subject to change without notice.
xiii
Package contents
Check your motherboard package for the following items
User Manual
ASUS Z87-DELUXE motherboard
User manual
Support DVD
6 x Serial ATA 6.0 Gb/s cables
1 x ASUS SLI™ bridge connector
1 x ASUS Q-Shield
1 x 2T2R dual-band Wi-Fi moving
antennas (Wi-Fi 802.11a/b/g/n/ac
compliant)
1 x 2-in-1 ASUS Q-Connector kit
•
If any of the above items is damaged or missing, contact your retailer.
•
The illustrated items above are for reference only. Actual product specifications may
vary with different models.
xiv
Installation tools and components
1 bag of screws
Philips (cross) screwdriver
PC chassis
Power supply unit
Intel® LGA1150 CPU
Intel® LGA1150 compatible CPU Fan
DIMM
SATA hard disk drive
SATA optical disc drive (optional)
Graphics card (optional)
The tools and components in the table above are not included in the motherboard package.
xv
xvi
Chapter 1:
Product Introduction
Product introduction
1
1.1
Special features
1.1.1
Product highlights
LGA1150 socket for 4th generation Intel® Core™ i7/Intel® Core™ i5/Intel®
Core™ i3, Pentium® and Celeron® processors
This motherboard supports 4th generation Intel® Core™ i7/Intel® Core™ i5/Intel® Core™i3,
Pentium®, and Celeron® processors in the LGA1150 package. It provides great graphics and
system performance with its GPU, dual-channel DDR3 memory slots and PCI Express 2.0/3.0
expansion slots.
Intel® Z87 Express Chipset
Intel® Z87 Express Chipset is a single chipset that supports the LGA1150 socket for 4th
generation Intel® Core™ i7/Intel® Core™ i5/Intel® Core™ i3, Pentium® and Celeron®
processors. It utilizes the serial point-to-point links, which increases bandwidth and enhances
the system’s performance. It natively supports up to six USB 3.0 ports for up to ten times
faster transfer rate than USB 2.0 and enables the iGPU function for Intel® integrated graphics
performance.
PCI Express® 3.0
PCI Express® 3.0 (PCIe 3.0) is the PCI Express bus standard that provides twice the
performance and speed of PCIe 2.0. It provides an optimal graphics performance,
unprecedented data speed and seamless transition with its complete backward compatibility
to PCIe 1.0/2.0 devices.
Dual-Channel DDR3 2800 (O.C.) / 2666 (O.C.) / 2600 (O.C.) / 2500 (O.C.) / 2400
(O.C.) / 2200 (O.C.) / 2133 (OC.) / 2000 (O.C.) / 1866 (O.C.) / 1800 (O.C.) / 1600 /
1333 MHz Support
The motherboard supports the dual-channel DDR3 memory that features data transfer rates
of DDR3 2800 (O.C.) / 2666 (O.C.) / 2600 (O.C.) / 2500 (O.C.) / 2400 (O.C.) / 2200 (O.C.) /
2133 (OC.) / 2000 (O.C.) / 1866 (O.C.) / 1800 (O.C.) / 1600 / 1333 MHz to boost the system’s
performance, and to meet the higher bandwidth requirements of 3D graphics, multimedia and
Internet applications.
Quad-GPU SLI and CrossFireX™ Support
This motherboard features the most powerful Intel® Z87 platform that optimizes PCIe
allocation in multi-GPU SLI and CrossFireX™ solution, giving you a brand-new gaming
enjoyment.
1-1
ASUS Z87-DELUXE
Intel® Smart Response Technology
Intel® Smart Response Technology, an important part of Green ASUS eco-friendly computing,
reduces load and wait time, eliminates unecessary hard drive spin thus lowering power
usage, and uses an installed SSD (requires 18.6 GB available space) as a cache for
frequently accessed data or applications. It combines SSD performance and hard drive
capacity, operating up to six times faster than a hard-drive-only system to boost the system’s
overall performance.
*
4th Generation Intel® Core™ processors family support Intel® Smart Response Technology.
** An operating system must be installed on the HDD to launch Intel® Smart Response Technology.
*** The SSD is reserved for caching function.
Intel® Smart Connect Technology
Your computer can receive fresh updates for selected applications, even when the system
is in sleep mode. This means less time waiting for applications to update and sync with the
cloud, leading to a more efficient computing experience.
Intel® Rapid Start Technology
Intel® Rapid Start Technology allows your system to receive updates for your web
applications in real-time even when your system is in sleep mode, saving wait time and
power usage.
1.1.2
Dual Intelligent Processors 4 with 4-Way Optimization
ASUS Dual Intelligent Processors 4 brings system control solution to a totally whole new
level, combining DIGI+ Power Control, TPU, EPU, and Fan Xpert 2 functions to push the
system’s performance to its optimal potential. It automatically pushes or reasonably balances
the system’s performance, power saving levels and fan settings via the user-friendly AI Suite
3 utility.
Digital Power Control
ASUS DIGI+ Power Control features the revolutionary and innovative digital VRM, DRAM,
and CPU Voltage controllers. These controllers offers ultra-precise memory and voltage
tuning for optimal system efficiency, stability and performance.
TPU
TPU (Turbo Processing Unit), offers precise voltage control and advanced monitoring
mechanisms through the Auto Tuning and TurboV functions in your ASUS AI Suite 3 utility.
EPU
EPU (Energy Processing Unit), the world’s first real-time system power-saving chip,
automatically detects the current system load and intelligently moderates power usage.
It offers a total system-wide energy optimization, reduces fan noise and extends the
component’s lifespan.
ASUS Fan Xpert 2
ASUS Fan Xpert 2 provides customizable settings for a cooler and quieter computing
environment. With its Fan Auto Tuning feature, ASUS Fan Xpert 2 automatically detects
and tweaks all fan speeds, and provides you with optimized fan settings based on the fans’
specifications and positions.
1-2
Chapter 1: Product introduction
1.1.3
ASUS Exclusive Features
Wi-Fi GO!
ASUS Wi-Fi GO! leads the way to a more enjoyable home entertainment. With ASUS Wi-Fi
GO!, you can wirelessly stream media files to DLNA devices, remotely control and access
your computer using your smart device and easily transfer files between your computer and
smart device.
Conveniently use and enjoy these ASUS Wi-Fi GO! functions:
•
•
•
•
•
Cloud GO!: Allows you to control files and sync them all across cloud services in a few
clicks.
DLNA Media Hub: Provides support to the latest DLNA standard and allows you to
stream media files to a DLNA-supported device.
Remote Desktop: Allows you to view your computer’s desktop and remotely operate
your computer in real-time from your smart device.
Remote Keyboard & Mouse: Allows you to use your smart device’s touch panel as a
remote keyboard and mouse for your computer.
Smart Sensor Control: Allows you to remotely control your computer using your smart
device’s customized gestures.
•
•
File Transfer: Allows you to transfer files between your computer and smart device.
Capture & Send: Allows you to take screenshots and send them to a smart device.
GPU Boost
GPU Boost accelerates the integrated GPU for extreme graphics performance, facilitates
flexible frequency adjustments and easily delivers stable system-level upgrades for every
use.
USB 3.0 Boost
ASUS USB 3.0 Boost, which supports USB 3.0 standard UASP (USB Attached SCSI
Protocol), significantly increases a USB device’s transfer speed up to 170% faster than the
already impressive USB 3.0 transfer speed. It automatically accelerates data speeds for
compatible USB 3.0 peripherals without the need for any user interaction.
USB Charger+
With a dedicated onboard controller, quick-charge all your smart devices such as
smartphones, tablets and more, all up to three times faster, even when the system is
powered off, in sleep or hibernation mode.
USB BIOS Flashback
USB BIOS Flashback offers a hassle-free updating solution for your ultimate convenience.
Install a USB storage device containing the BIOS file, press the BIOS Flashback button for
about three seconds, and the UEFI BIOS is automatically updated even without entering
the existing BIOS or operating system. It also allows you to regularly check for UEFI BIOS
updates, and download the latest BIOS automatically.
1-3
ASUS Z87-DELUXE
Network iControl
Network iControl is an intuitive one-step network control center that makes it easier for you to
manage your bandwidth and allows you to set, monitor and schedule the bandwidth priorities
for your network programs.
AI Suite 3
With its user-friendly interface, ASUS AI Suite 3 consolidates all the exclusive ASUS features
into one simple-to-use software package. It allows you to supervise overclocking, energy
management, fan speed control, voltage and sensor readings, and even interact with smart
devices via Wi-Fi. This all-in-one software offers diverse and ease to use functions, with no
need to switch back and forth between different utilities.
MemOK!
MemOK!, the remarkable memory rescue tool, allows you to simply press a button to
patch memory issues, ensure memory boot compatibility, determine fail-safe settings, and
dramatically improve the systemís bootup.
1.1.4
ASUS Quiet Thermal Solution
ASUS Fanless Design - Heat-pipe solution
The stylish heatsink features a 0-dB thermal solution that offers you a noiseless PC
environment. The heatsink design also lowers the temperature of the chipset and power
phase area through high efficient heat-exchange. Combined with usability and aesthetics,
the ASUS stylish heatsink will give you an extremely silent and cooling experience with its
elegant appearance.
1.1.5
ASUS EZ DIY
ASUS UEFI BIOS (EZ Mode)
ASUS UEFI BIOS, a UEFI compliant architecture, offers the first mouse-controlled intuitive
graphical BIOS interface that goes beyond the traditional keyboard-only BIOS controls,
providing you with more flexibility, convenience, and easy to navigate UEFI BIOS than the
traditional BIOS versions. It offers you with dual selectable modes and native support for hard
drives larger than 2.2 TB.
ASUS UEFI BIOS includes the following new features:
•
•
•
•
•
•
New My Favorite function allows you to quickly access the frequently used items
New Quick Note function allows you to take notes in the BIOS environment
New log reminder allows you to view all your modified settings
F12 BIOS snapshot hotkey
F3 Shortcut for most accessed information
ASUS DRAM SPD (Serial Presence Detect) information detecting faulty DIMMs, and
helping with difficult POST situations.
1-4
Chapter 1: Product introduction
ASUS Q-shield
ASUS Q-Shield’s special design makes it convenient and easy to install on your
motherboard. With better electric conductivity, it ideally protects your motherboard against
static electricity and shields it against EMI (Electronic Magnetic Interference).
ASUS Q-connector
ASUS Q-Connector is a unique adapter that allows you to easily connect or disconnect the
chassis front panel cables to one module, eliminating the hassle of plugging one cable at a
time and making the connection quick and accurate.
1.1.6
Other special features
DisplayPort Support
DisplayPort is a digital display interface standard, providing billions of colors and bi-
directional communications, thus enabling the fastest refresh rates, and the highest resolution
digital display through a single cable. Also, it supports HDCP copy protection for Blu-ray
discs. Simply output 3D signals through the connected DisplayPort cable with your 3D
display, then you can sit back and enjoy a perfect 3D animation experience.
HDMI Support
High Definition Multimedia Surface (HDMI) is a set of digital video standards that delivers
mulit-channel audio and uncompressed digital video up to 4K/2K resolution visuals through
a single cable. Supporting HDCP copy protection such as HD DVD and blu-ray discs, HDMI
provides you with the highest quality home theater experience.
DTS Connect
To get the most out of your audio entertainment across all formats and quality levels, DTS
Connect combines two enabling technologies, DTS Neo:PC™ upmixes stereo sources (CDs,
MP3s, WMAs, internet radio) into as many as 7.1 channels of incredible surround sound.
Consumers can connect their PC to a home theater system. DTS Interactive is capable of
performing mult-channel encoding of DTS bitstreams on personal computers, and sending
encoded bitstreams out of a digital audio connection (such as S/PDIF or HDMI) designed to
deliver audio to an external decoder.
DTS UltraPC II
DTS UltraPC II delivers a superior surround sound experience through your system’s
speakers and headphones while monitoring and balancing the loudness level difference
between digital audio formats. It also ehnances the audio settings through augmenting
low and high frequencies of musical tones, restores compressed or re-mastered sounds,
improves bass performance even without a subwoofer, and improves dialogues derived from
DVD or Blu-ray Disc™.
ErP Ready
The motherboard is European Union’s Energy-related Products (ErP) ready, and ErP requires
products to meet certain energy efficiency requirement in regards to energy consumptions.
This is in line with ASUS vision of creating environment-friendly and energy-efficient products
through product design and innovation to reduce carbon footprint of the product and thus
mitigate environmental impacts.
1-5
ASUS Z87-DELUXE
1.2
Motherboard overview
Before you proceed
1.2.1
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
•
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
•
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
1-6
Chapter 1: Product introduction
Layout contents
Connectors/Jumpers/Slots
Page
1-39
1-9
1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
2. LGA1150 CPU socket
3. CPU, optional, and,chassis fan connectors (4-pin CPU_FAN, 4-pin
CPU_OPT, 4-pin CHA_FAN1-4 )
1-37
4. DDR3 DIMM slots
1-10
1-22
1-35
1-34
5. MemOK! button
6. USB 3.0 connector (20-1 pin USB3_12)
7. ASMedia® Serial ATA 6.0 Gb/s connectors
(7-pin SATA6G_E12/E34 [dark brown])
8. Intel® Z87 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [yellow])
1-33
1-24
1-25
1-41
1-40
1-23
1-36
1-26
1-28
1-41
1-21
1-21
1-34
1-38
9. TPU switch
10. EPU switch
11. Direct connector (2-pin DRCT)
12. System panel connector (20-8 pin PANEL)
13. DirectKey button
14. USB 2.0 connectors (10-1 pin USB1112, USB1314)
15. Clear CMOS button
16. Q-Code LEDs (LED1, LED2)
17. TPM connector (20-1 pin TPM)
18. Power-on button
19. Reset button
20. Front panel audio connector (10-1 pin AAFP)
21. Digital audio connector (4-1 pin SPDIF_OUT)
1-8
Chapter 1: Product introduction
1.2.3
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1150 socket designed for the 4th
Generation Intel® Core™ i7 / Intel® Core™ i5 / Intel® Core™ i3, Pentium® and Celeron®
processors.
•
•
Ensure that all power cables are unplugged before installing the CPU.
Ensure that you install the correct CPU designed for LGA1150 only. DO NOT install a
CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket.
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
•
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1150 socket.
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
1-9
ASUS Z87-DELUXE
1.2.4
System memory
The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) slots.
A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR
or DDR2 memory module to the DDR3 slot.
Recommended memory configurations
1-10
Chapter 1: Product introduction
Memory configurations
You may install 2GB, 4GB and 8GB unbuffered and non-ECC DDR3 DIMMs into the DIMM
sockets.
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
•
•
•
According to Intel® CPU spec, DIMM voltage below 1.65V is recommended to protect
the CPU.
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
a) Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS.
b) Install a 64-bit Windows® OS when you want to install 4GB or more on the
motherboard.
c) For more details, refer to the Microsoft® support site at http://support.microsoft.
com/kb/929605/en-us.
•
•
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 3.5 Ai Tweaker menu for manual memory
frequency adjustment.
•
•
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
Memory modules with memory frequency higher than 2133MHz and their
corresponding timing or the loaded XMP profile is not the JEDEC memory standard.
The stability and compatibility of the memory modules depend on the CPU’s
capabilities and other installed devices.
•
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code (D/
C) from the same vendor. Check with the vendor to get the correct memory modules.
1-11
ASUS Z87-DELUXE
Z87-DELUXE Motherboard Qualified Vendors Lists (QVL)
DDR3 2800(O.C.) MHz capability
DIMM socket
support (Optional)
Chip
Brand
Chip
NO.
Vendors
Part No.
Size
SS/DS
Timing
Voltage
2
•
4
•
G.SKILL
G.SKILL
G.SKILL
F3-2800CL11Q-16GBZHD(XMP)
F3-2800CL12Q-32GTXD(XMP)
F3-2800CL12Q-32GTXD(XMP)
16GB(4x4GB)
32GB(4x8GB)
32GB(4x8GB)
DS
DS
DS
-
-
-
-
11-13-13-35
12-13-13-35
12-13-14-35
1.65
1.65
1.65
•
•
•
•
APACER
78.BAGH5.AFDOC
8GB(2x4GB)
DS
12-14-14-35
1.65
•
DDR3 2666(O.C.) MHz capability
DIMM socket
support
(Optional)
Chip
Brand
Chip
NO.
Vendors
Part No.
Size
SS/DS
Timing
Voltage
2
•
•
•
•
•
•
•
•
•
4
•
•
•
•
•
•
•
•
CORSAIR
G.SKILL
G.SKILL
GEIL
CMD16GX3M4A2666C11
F3-2666CL11Q-16GTXD(XMP)
F3-2666CL10Q-16GBZHD(XMP)
GOC332GB2666C11QC(XMP)
78.BAGFF.AFC0C
16GB (4x4GB)
16GB (4x4GB)
16GB (4x4GB)
32GB (4x8GB)
16GB (4x4GB)
16GB (4x4GB)
32GB (4x8GB)
8GB (2x4GB)
16GB (2x8GB)
DS
DS
DS
DS
SS
DS
DS
SS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
11-13-13-35
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
11-13-13-35
10-12-12-31
11-13-13-35
12-13-13-35
12-13-13-35
12-13-13-35
11-13-13-35
11-13-13-35
APACER
APACER
APACER
TEAM
78.BAGFR.AFD0C
78.CAGFF.AFD0C
TXD34G2666HC11CBK
TXD38G2666HC11CBK
TEAM
DDR3 2600(O.C.) MHz capability
DIMM socket
support
(Optional)
Chip
Brand
Chip
NO.
Vendors
Part No.
Size
SS/DS
Timing
Voltage
1
•
2
4
•
G.skill
G.skill
ADATA
F3-20800CL10-16GBZMD(XMP)
F3-2600CL11Q-32GBZHD
AX3U2600GW8G11-DG2
16GB(4x4GB)
32GB(4x8GB)
16GB(2x4GB)
DS
DS
DS
-
-
-
-
10-12-12-28
11-13-13-35
11-13-13-35
1.65
1.65
1.65
•
•
•
•
•
DDR3 2500(O.C.) MHz capability
DIMM socket
support (Optional)
Chip
Brand NO.
Chip
Vendors
Part No.
Size
SS/DS
DS
Timing
10-11-11-31
Voltage
1.65
2
4
G.SKILL
F3-20000CL10Q-GBZHD(XMP)
16GB (4x4GB)
-
-
•
•
DDR3 2400(O.C.) MHz capability
DIMM socket
support
(Optional)
SS/
DS
Chip
Brand NO.
Chip
Timing
Vendors
Part No.
Size
Voltage
2
•
•
•
•
•
4
•
A-DATA
Apacer
AX3U2400GC4G10(XMP)
78.BAGFL.AFD0C(XMP)
4GB
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
10-12-12-31
11-12-12-30
11-11-11-30
10-12-12-31
2400 9-11-11-31
1.65
-
8GB (2x4GB)
8GB (2x4GB)
•
Apacer
783BAGF3.AFD0C(XMP)
CMZ16GX3M2A2400C10 (Ver4.21)
-
•
CORSAIR
CORSAIR
16GB (2x8GB) DS
1.65
1.65
•
CMZ16GX3M4A2400C9R (Ver4.13)(XMP) 16GB (4x4GB) DS
(continued on the next page)
1-12
Chapter 1: Product introduction
DDR3 2400(O.C.) MHz capability
DIMM
socket
support
(Optional)
Chip Chip
Brand NO.
Vendors
Part No.
Size
SS/DS
Timing
Voltage
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
•
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
F3-19200CL10Q-32GBZHD(XMP) 32GB (4x8GB) DS
F3-19200CL11Q-16GBZHD(XMP) 16GB (4x4GB) DS
F3-19200CL11Q-16GBZHD(XMP) 16GB (4x4GB) DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10-12-12-31
11-11-11-31
11-11-11-31
9-11-9-28
9-11-11-31
9-11-9-27
10-11-11-30
11-11-11-30
11-13-11-30
11-13-13-30
-
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.66
1.65
•
•
F3-19200CL9D-4GBPIS(XMP)
F3-19200CL9Q-16GBZMD(XMP)
GET34GB2400C9DC(XMP)
GOC316GB2400C10QC(XMP)
GOC316GB2400C11QC(XMP)
KHX2400C11D3K4/8GX(XMP)
KHX24C11K4/16X(XMP)
4G (2x2G)
16GB (4x4GB) DS
4GB (2x2GB) DS
DS
•
•
GEIL
16GB (4x4GB) DS
16GB (4x4GB) DS
GEIL
Kingston
KINGSTON
KINGSTON
KINGSTON
Patriot
8GB (4x2GB)
16GB (4x4GB) DS
8GB (2x4GB) DS
32GB (4x8GB) DS
SS
•
•
KHX24C11T2K2/8X(XMP)
KHX24C11T3K4/32X(XMP)
PVV34G2400C9K(XMP)
9-9-9-24
4GB (2x2GB)
8GB (2x4GB)
8GB (2x4GB)
DS
DS
DS
9-11-9-27
11-11-11-30
Patriot
PXD38G2400C11K(XMP)
PXD38G2400C11K(XMP)
•
•
Patriot
2400 11-11-11-30 1.65
10-12-12-31 1.65
Team
TXD38G2400HC10QBK(XMP)
8GB
DS
-
-
•
•
DDR3 2200(O.C.) MHz capability
DIMM socket
support (Optional)
Chip
Brand
Chip
NO.
Vendors
Part No.
Size
SS/DS
Timing
Voltage
2
•
4
G.SKILL
GEIL
F3-17600CL7D-4GBFLS(XMP)
GET34GB2200C9 DC(XMP)
GET38GB2200C9 ADC(XMP)
4G (2x2G)
DS
DS
DS
-
-
-
-
-
-
7-10-10-28
9-10-9-28
9-11-9-28
1.65
1.65
1.65
4GB (2x2GB)
8GB (2x4GB)
•
•
•
GEIL
•
DDR3 2133(O.C.) MHz capability
DIMM
socket
support
(Optional)
Chip
Brand NO.
Chip
Vendors
Part No.
Size
SS/DS
Timing
Voltage
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
•
A-DATA
A-DATA
Apacer
AX3U2133XC4G10(XMP)
4GB
8GB
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10-11-11-30
10-11-11-30
9-9-9-24
1.65
1.65
-
AX3U2133XW8G10(XMP)
•
78.BAGE4.AFD0C(XMP)
8GB (2x4GB)
4GB
•
Apacer
AHU04GFB33CAQ3R(XMP)
CMD8GX3M2A2133C9 (Ver1.5)(XMP)
CMT4GX3M2B2133C9(Ver7.1)(XMP)
CMT4GX3M2B2133C9(XMP)
F3-17000CL11Q2-64GBZLD(XMP)
F3-17000CL9Q-16GBXLD(XMP)
F3-17000CL9Q-16GBZH(XMP)
F3-17066CL9D-8GBPID(XMP)
F3-17066CL9Q-16GBTDD(XMP)
F3-2133C11Q-32GZL(XMP)
KHX2133C11D3K4/16GX(XMP)
KHX2133C11D3T1K2/16GX(XMP)
KHX21C11T3FK8/64X(XMP)
OCZ3XTEP2133C9LV4GK
11-13-13-31
9-11-10-27
9-10-9-27
9-10-9-27
11-11-11-30
9-11-9-28
9-11-10-28
9-9-9-24
-
•
CORSAIR
CORSAIR
CORSAIR
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
KINGSTON
KINGSTON
KINGSTON
OCZ
8GB (2x4GB)
4GB (2x2GB)
4GB (2x2GB)
64GB (8x8GB)
16GB (4x4GB)
16GB (4x4GB)
8GB (2x4GB)
16GB (4x4GB)
32GB (4x8GB)
16GB (4x4GB)
16GB (2x8GB)
64GB (8x8GB)
2GB
1.5
1.5
•
•
•
•
•
•
1.5
1.5
1.65
1.65
1.65
1.65
1.5
9-9-9-24
11-11-11-31
11-12-11-30
9-9-9-24
•
•
•
•
1.65
1.6
9-9-9-24
1.5
7-7-7-20
1.65
1.5
Patriot
PV316G213C1K(XMP)
16GB (2x8GB)
4GB (2x2GB)
8GB (2x4GB)
8GB (2x4GB)
8GB
11-11-11-30
9-11-9-27
9-9-9-24
•
•
Patriot
PVV34G2133C9K(XMP)
1.66
1.65
Patriot
PXD38G2133C11K(XMP)
Patriot
PXD38G2133C11K(XMP)
2133 11-11-11-27 1.5
•
•
•
Team
TLD38G2133HC11ABK(XMP)
TXD34096M2133HC11A-V(XMP)
11-11-11-31
11-11-11-31
1.65
1.65
Team
4GB
1-13
ASUS Z87-DELUXE
DDR3 2000(O.C.) MHz capability
DIMM
socket
support
(Optional)
Chip
Brand
Vendors
Part No.
Size
SS/DS
Chip NO.
Timing
Voltage
2
•
•
•
•
•
•
•
•
•
•
•
•
4
AEXEA
AEXEA
Apacer
Asint
AXA3ES2G2000LG28V(XMP)
2GB
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
-
-
-
-
-
1.65
1.65
-
•
AXA3ES4GK2000LG28V(XMP) 4GB (2x2GB)
-
-
78.AAGD5.9KD(XMP)
6GB (3x2GB)
4GB
-
9-9-9-27
•
•
SLA302G08-ML2HB(XMP)
F3-16000CL9D-4GBTD(XMP)
GUP34GB2000C9DC(XMP)
PV736G2000ELK(XMP)
PVT36G2000LLK(XMP)
PX7312G2000ELK(XMP)
Hynix
H5TQ2G83BF RH9C 9-9-9-27
-
G.SKILL
GEIL
4GB (2x2GB)
4GB (2x2GB)
6GB (3x2GB)
6GB (3x2GB)
12GB (3x4GB)
2GB
-
-
9-9-9-24
9-9-9-28
7-7-7-20
8-8-8-24
1.65
1.65
1.65
1.65
-
-
Patriot
Patriot
Patriot
-
-
•
•
•
•
•
•
-
-
-
-
9-11-9-27 1.65
Silicon Power SP002GBLYU200S02(XMP)
-
-
-
-
Team
Team
TXD32048M2000C9(XMP)
TXD32048M2000C9-L(XMP)
2GB
Team
Team
T3D1288RT-20
T3D1288LT-20
9-9-9-24
9-9-9-24
1.5
1.5
2GB
Team
TXD32048M2000C9-L(XMP)
2GB
DS
Team
T3D1288RT-20
9-9-9-24
1.6
•
DDR3 1866(O.C.) MHz capability
DIMM
socket
support
(Optional)
Chip
Brand NO.
Chip
Vendors
Part No.
Size
SS/DS
Timing
Voltage
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
CMD16GX3M2A1866C9 (Ver5.29)(XMP)
CMD16GX3M4A1866C9 (Ver4.13)(XMP)
CMD16GX3M4A1866C9 (Ver8.16)(XMP)
CMD8GX3M2A1866C9 (Ver4.13)(XMP)
CMD8GX3M2A1866C9 (Ver5.12)(XMP)
CMD8GX3M2A1866C9 (Ver8.16)(XMP)
CMT32GX3M4X1866C9(Ver3.23)(XMP)
16GB (2x8GB)
16GB (4x4GB)
16GB (4x4GB)
8GB (2x4GB)
8GB (2x4GB)
8GB (2x4GB)
32GB (4x8GB)
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
SS
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1866 9-9-9-27
9-10-9-27
9-10-9-27
-
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.6
1.5
1.65
1.65
1.65
1.65
1.5
1.5
•
•
•
9-10-9-27
9-10-9-27
9-10-9-27
9-10-9-27
9-10-9-27
10-11-10-27
10-11-10-27
9-10-9-27
9-10-9-27
1866 9-10-9-27
9-9-9-27
•
•
•
•
•
•
CMZ16GX3M4X1866C9R (Ver8.16)(XMP) 16GB (4x4GB)
CMZ16GX3M4X1866C9R(Ver 8.16)(XMP) 16GB (4x4GB)
CMZ32GX3M4X1866C10 (Ver3.23)(XMP) 32GB (4x8GB)
CMZ32GX3M4X1866C10(Ver3.23)(XMP)
CMZ8GX3M2A1866C9 (Ver8.16)(XMP)
CMZ8GX3M2A1866C9(XMP)
CMZ8GX3M2A1866C9G (Ver5.12)(XMP)
BLE4G3D1869DE1XT0.16FMD(XMP)
F3-14900CL10Q2-64GBZLD(XMP)
F3-14900CL9D-8GBSR(XMP)
F3-14900CL9Q-16GBXL(XMP)
F3-14900CL9Q-16GBZL(XMP)
F3-14900CL9Q-8GBFLD(XMP)
F3-1866C9Q-32GXM(XMP)
32GB (4x8GB)
8GB (2x4GB)
8GB (2x4GB)
8GB (2x4GB)
4GB
•
•
•
•
•
•
•
•
•
•
•
•
•
•
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
KINGSTON
Patriot
64GB (8x8GB)
8GB (2x4GB)
16GB (4x4GB)
16GB (4x4GB)
8GB (2x4GB)
32GB (4x8GB)
8GB (2x4GB)
4GB (2x2GB)
8GB (2x4GB)
8GB (2x4GB)
8GB (2x4GB)
4GB
10-11-10-30
9-10-9-28
9-10-9-28
9-10-9-28
9-9-9-24
9-10-9-28
-
KHX1866C9D3K2/8GX(XMP)
PXD34G1866ELK(XMP)
9-9-9-24
Patriot
PXD38G1866ELK(XMP)
9-11-9-27
9-11-9-27
1866 9-10-9-27
9-11-9-27
Patriot
PXD38G1866ELK(XMP)
Patriot
PXD38G1866ELK(XMP)
Team
TLD34G1866HC9KBK(XMP)
Team
TLD38G1866HC10SBK(XMP)
8GB
DS
-
-
10-11-10-30
1.5
•
•
1-14
Chapter 1: Product introduction
DDR3 1800(O.C.) MHz capability
DIMM socket
support (Optional)
SS/
DS
Chip
Brand
Chip
NO.
Vendors
Part No.
Size
Timing
Voltage
2
4
G.SKILL
F3-14400CL9D-4GBRL(XMP)
4GB (2x2GB)
DS
-
-
9-9-9-24
1.6
•
•
DDR3 1600(O.C.) MHz capability
DIMM
socket
support
(Optional)
Vendors
Part No.
Size
SS/DS Chip Brand Chip NO.
Timing
Voltage
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
A-DATA
A-DATA
A-DATA
A-DATA
AMD
AD3U1600C2G11
2GB
4GB
4GB
8GB
2GB
4GB
8GB (2x4GB)
4GB
4GB
8GB
4GB
4GB
8GB
4GB
4GB
4GB
8GB
2GB
2GB
4GB
SS
DS
SS
DS
SS
DS
DS
DS
SS
DS
DS
DS
DS
DS
DS
DS
DS
SS
DS
DS
MICRON
MICRON
A-DATA
A-DATA
AMD
AMD
-
D9PFJ
D9PFJ
11-11-11-28
-
AD3U1600C4G11
11-11-11-28
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
AD3U1600W4G11
3WCD-1211A
3WCD-1211A
23EY4587M B6H
23EY4587M B6H
-
11-11-11-28
-
AD3U1600W8G11
11-11-11-28
-
AE32G1609U1-U
-
1.5
AMD
AE34G1609U2-U
-
1.5
AMD
AP38G1608U2K (XMP)
78.B1GE3.9L10C
9-9-9-28
-
1.65
Apacer
Apacer
Apacer
Apacer
Apacer
Apacer
Asint
Apacer
Apacer
Apacer
-
AM5D5908D EQSCK
1.65
78.B1GET.9K00C
AM5D6008B QQSCK 11-11-11-28
AM5D6008B QQSCK 11-11-11-31
-
78.C1GET.9K10C
-
AHU04GFA60C9Q1D (XMP)
AHU04GFA60C9Q3R (XMP)
AHU08GFA60CBT3R (XMP)
SLA302G08-EGG1C (XMP)
SLA302G08-EGJ1C (XMP)
SLA302G08-EGN1C
SLB304G08-EGN1B
SLZ302G08-EGN1C
SLZ3128M8-EGJ1D (XMP)
AQ12M64B8BKK0S
-
9-9-9-27
1.65
-
-
11-11-11-28
-
-
-
9-9-9-24
-
Asint
Asint
ASint
ASint
ASint
Asint
302G08-GG1C
302G08-GJ1C
302G08-GN1C
304G08-GN1B
302G08-GN1C
3128M8-GJ1D
9-9-9-27
-
Asint
9-9-9-27
-
Asint
-
-
-
-
-
-
Asint
-
•
•
•
•
Asint
-
Asint
-
ATP
SAMSUNG K4B2G08 460
NO
CMD16GX3M2A1600C9
(Ver8.21)(XMP)
CORSAIR
CORSAIR
16GB (2x8GB) DS
-
-
-
-
9-9-9-24
1.5
1.5
•
•
CMD8GX3M2A1600C8
(Ver5.12)(XMP)
1600 8-8-
8-24
8GB (2x4GB)
DS
•
CMD8GX3M2A1600C9
(Ver2.12)(XMP)
CORSAIR
CORSAIR
CORSAIR
8GB (2x4GB)
4GB (2x2GB)
DS
DS
-
-
-
-
-
-
9-9-9-24
6-6-6-18
1.5
•
•
•
•
•
•
CMG4GX3M2A1600C6
1.65
1.5
CML16GX3M4X1600C8 (Ver
2.12)(XMP)
Heat-Sink
Package
16GB (4x4GB) DS
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CMP6GX3M3A1600C8 (XMP)
CMP6GX3M3A1600C8 (XMP)
CMX6GX3M3A1600C9 (XMP)
CMX6GX3M3C1600C7 (XMP)
6GB (3x2GB)
6GB (3x2GB)
6GB (3x2GB)
6GB (3x2GB)
DS
DS
DS
DS
-
-
-
-
-
-
-
-
8-8-8-24
8-8-8-24
9-9-9-24
7-8-7-20
1.65
1.65
1.65
1.65
•
•
•
•
•
•
CMX8GX3M2A1600C9
(Ver3.19)(XMP)
CORSAIR
8GB (2x4GB)
SS
-
-
9-9-9-24
1.65
•
•
CMZ16GX3M2A1600C10
(Ver.3.24)(XMP)
CORSAIR
CORSAIR
CORSAIR
16GB (2x8GB) DS
16GB (4x4GB) DS
32GB (4x8GB) DS
-
-
-
-
-
-
10-10-10-27 1.5
9-9-9-24 1.5
•
•
•
•
•
•
CMZ16GX3M4A1600C9( XMP)
CMZ32GX3M4X1600C10
(Ver2.2)(XMP)
10-10-10-27 1.5
10-10-10-27 1.5
CMZ8GX3M1A1600C10
(Ver3.23)(XMP)
CORSAIR
8GB
DS
-
-
•
CORSAIR
CORSAIR
CMZ8GX3M2A1600C8 (XMP)
CMZ8GX3M2A1600C9 (XMP)
8GB (2x4GB)
8GB (2x4GB)
DS
DS
-
-
-
-
8-8-8-24
9-9-9-24
1.5
1.5
•
•
•
•
CMZ8GX3M4X1600C9 (Ver
2.12)(XMP)
CORSAIR
8GB (4x2GB)
SS
-
-
9-9-9-24
1.5
•
•
CORSAIR
Crucial
HX3X12G1600C9 (XMP)
12GB (6x2GB) DS
-
-
-
-
-
-
9-9-9-24
8-8-8-24
8-8-8-24
1.6
•
•
•
•
•
BL12864BN1608.8FF (XMP)
BL25664BN1608.16FF (XMP)
2GB (2x1GB)
4GB (2x2GB)
SS
DS
1.65
1.65
Crucial
BLT4G3D1608DT1TX0.16F
M(XMP)
Crucial
4GB
DS
-
-
8-8-8-24
1.5
•
•
EK Memory EKM324L28BP8-I16 (XMP)
EK Memory EKM324L28BP8-I16 (XMP)
4GB (2x2GB)
4GB (2x2GB)
2GB
DS
DS
SS
DS
DS
DS
DS
-
-
9
-
•
•
•
•
•
•
•
-
-
9
-
•
•
•
•
•
Elixir
M2X2G64CB88G7N-DG(XMP)
M2X4G64CB8HG5N-DG(XMP)
M2X8G64CB8HB5N-DG(XMP)
F3-12800CL7D-8GBRH(XMP)
F3-12800CL7D-8GBXH(XMP)
Elixir
Elixir
Elixir
-
N2CB2G80 GN-DG
9-9-9-28
9-9-9-28
9-9-9-28
7-8-7-24
7-8-7-24
-
Elixir
4GB
N2CB2G80 GN-DG
-
Elixir
8GB
N2CB4G80B N-DG
1.5
1.6
1.6
G.SKILL
G.SKILL
8GB (2x4GB)
8GB (2x4GB)
-
-
-
(continued on the next page)
1-15
ASUS Z87-DELUXE
DDR3 1600 MHz capability
DIMM
socket
support
(Optional)
SS/ Chip
Vendors
Part No.
Size
Chip NO.
Timing
Voltage
DS
Brand
2
•
4
G.SKILL
G.SKILL
G.SKILL
F3-12800CL7Q-16GBXH(XMP)
16GB (4x4GB) DS
-
-
-
-
-
-
7-8-7-24
8-8-8-24
9-9-9-24
1.6
•
F3-12800CL8D-8GBECO(XMP) 8GB ( 2x4GB ) DS
1.35
1.5
•
F3-12800CL9D-4GBNQ(XMP)
4GB (2x2GB) DS
•
G.SKILL
F3-12800CL9D-8GBRL(XMP)
8GB (2x4GB) DS
-
-
9-9-9-24
1.5
•
•
G.SKILL
F3-12800CL9D-8GBSR2(XMP)
F3-12800CL9Q-16GBXL(XMP)
F3-12800CL9Q-16GBZL(XMP)
F3-1600C9Q-32GXM(XMP)
GET316GB1600 C9QC(XMP)
GUP34GB1600C 7DC(XMP)
GVP38GB1600C 8QC(XMP)
GR1600D364L9/2G
8GB (2x4GB) DS
16GB (4x4GB) DS
16GB (4x4GB) DS
32GB (4x8GB) DS
16GB (4x4GB) DS
4GB (2x2GB) DS
8GB (4x2GB) DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-24
1.25
1.5
1.5
1.5
1.6
1.6
1.6
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
G.SKILL
9-9-9-24
G.Skill
9-9-9-24
G.SKILL
-
GEIL
9-9-9-28
GEIL
7-7-7-24
GEIL
8-8-8-28
GoodRam
Hynix
2GB
4GB
2GB
4GB
DS
DS
SS
DS
GoodRam GF1008 KC-JN
Hynix H5TQ2G 83CFR
-
•
HMT351U6CFR8C-PB
-
-
KINGMAX
KINGMAX
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
FLGE85F-C8KL9A(XMP)
FLGF65F-C8KL9A(XMP)
KHX1600C9D3K 3/12GX(XMP)
KHX1600C9D3K3 /12GX(XMP)
KHX1600C9D3K 3/6GX(XMP)
KHX1600C9D3K 3/6GX(XMP)
KHX1600C9D3K3 /6GX(XMP)
KHX1600C9D3K 4/16GX(XMP)
KHX1600C9D3K6 /24GX(XMP)
KHX1600C9D3K 8/32GX(XMP)
KHX1600C9D3L K2/8GX(XMP)
KHX1600C9D3P 1K2/8G
KHX16C10B1K2 /16X(XMP)
KHX16C9K2/16
KINGMAX N/A
KINGMAX N/A
9-9-9-28
-
•
•
•
•
9-9-9-28
-
12GB (3x4GB) DS
12GB (3x4GB) DS
6GB (3x2GB) DS
6GB (3x2GB) DS
6GB (3x2GB) DS
16GB (4x4GB) DS
24GB (6x4GB) DS
32GB (8x4GB) DS
8GB (2x4GB) DS
8GB (2x4GB) DS
16GB (2x8GB) DS
16GB (2x8GB) DS
16GB (2x8GB) DS
-
-
-
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.35
1.5
1.5
-
-
9
-
-
9
-
-
9
•
•
•
•
•
•
•
•
•
•
•
•
•
-
-
9
-
-
9-9-9-24
-
-
9
-
-
9-9-9-27
-
-
9-9-9-24
-
-
9
-
-
-
-
-
1333-9-9-9-24 1.5
KHX16C9P1K2/16
-
-
-
1.5
1.5
-
KVR16N11/4
4G
DS
DS
DS
DS
DS
SS
Hynix
H5TQ2G8 3CFRPBC
-
KINGTIGER KTG2G1600P G3(XMP)
2GB
8GB
4GB
4GB
2GB
-
-
-
MICRON
MICRON
MICRON
MICRON
Mushkin
Mushkin
OCZ
MT16JTF1G64AZ-1G6D1
MT16KTF51264AZ-1G6M1
MT16KTF51264AZ-1G6M1
MT8KTF25664AZ-1G6M1
996805(XMP)
MICRON
D9PBC
-
1.5
-
MICRON
D9PFJ
11-11-11-28
-
MICRON
D9PFJ
-
•
•
MICRON
D9PFJ
-
-
4GB (2x2GB) DS
6GB (3x2GB) DS
4GB (2x2GB) DS
16GB (2x8GB) DS
16GB (2x8GB) DS
8GB (2x4GB) DS
8GB (2x4GB) DS
4GB (2x2GB) DS
4GB (2x2GB) DS
16GB (4x4GB) DS
8GB (2x4GB) DS
8GB (2x4GB) DS
8GB (2x4GB) DS
12GB (3x4GB) DS
8GB (2x4GB) DS
-
-
6-8-6-24
6-8-6-24
8-8-8
1.65
1.65
1.65
1.65
1.5
1.65
1.5
1.7
1.7
1.5
1.5
1.65
1.65
1.65
998805(XMP)
-
-
OCZ3BE1600C8LV4GK
PGD316G1600ELK (XMP)
PGD316G1600ELK (XMP)
PGD38G1600ELK (XMP)
PGD38G1600ELK (XMP)
PGS34G1600LLKA
-
-
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
PSC
-
-
-
•
•
•
-
-
9-9-9-24
9-9-9-24
9-9-9-24
7-7-7-20
8-8-8-24
9-9-9-24
9-9-9-24
8-9-8-24
8-9-8-24
8-9-8-24
-
-
-
-
-
-
•
•
•
•
•
PGS34G1600LLKA2
-
-
PV316G160C9QK RD (XMP)
PV38G160C9KRD (XMP)
PVV38G1600LLK (XMP)
PX538G1600LLK (XMP)
PX7312G1600LLK (XMP)
PXD38G1600LLK (XMP)
AL9F8L93B-GN2E
-
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
-
-
1600 8-9-8-24 1.65
4GB
8GB
4GB
4GB
2GB
4GB
8GB
SS
DS
DS
DS
SS
DS
DS
DS
DS
DS
PSC
PSC
Hynix
ELPIDA
A3P4GF3BLF
A3P4GF3BLF
H5TQ2G83B FRPBC
J2108BDBG -GN-F
-
-
PSC
ALAF8L93B-GN2E
-
-
SanMax
SanMax
SMD-4G68HP-16KZ
-
1.5
-
SMD-4G68NG-16KK
-
Silicon Power SP002GBLTU16 0V02 (XMP)
Silicon Power SP004GBLTU16 0V02 (XMP)
S-POWER 20YT5NG
S-POWER 20YT5NG
9-11-11-28
9-9-9-24
11-11-11-28
1.5
1.5
-
Team
TED38G1600HC1 1BK
-
-
Team
TXD34096M1600 HC9-D (XMP) 4GB
Hynix
H5TC2G83 BFRH9A 9-9-9-24
1.5
-
•
•
•
Transcend
Transcend
JM1600KLH-8G (626633)
TS1GLK64V6H (620945)
8GB
8GB
Transcend TK963EBF3
SAMSUNG K4B4G084 6B
-
-
-
1-16
Chapter 1: Product introduction
DDR3 1333 MHz capability
DIMM
socket
support
(Optional)
SS/
DS
Vendors
Part No.
Size
Chip Brand
Chip NO.
Timing
Voltage
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
ACTICA
AMD
ACT1GHU64B8F1333S
1GB
SS
SS
DS
DS
DS
DS
DS
DS
SS
DS
DS
DS
SS
DS
DS
SS
DS
DS
SAMSUNG
SAMSUNG
Micron
SAMSUNG
Micron
SAMSUNG
Hynix
K4B1G0846F
-
-
-
-
-
-
-
-
-
-
9
9
-
-
-
-
-
ACT1GHU72C8G1333S 1GB
ACT2GHU64B8G1333M 2GB
K4B1G0846F(ECC)
D9KPT
-
-
ACT2GHU64B8G1333S
2GB
K4B1G0846F
-
ACT2GHU72D8G1333M 2GB
ACT2GHU72D8G1333S 2GB
D9KPT(ECC)
-
K4B1G0846F(ECC)
H5TQ2G83AFR
H5TQ2G83AFR (ECC)
23EY4587MB3H
23EY4587MB3H
AM5D5808FE QSBG
AM5D5908CE HSBG
302G08-DJ1C
-
ACT4GHU64B8H1333H
4GB
-
ACT4GHU72D8H1333H 4GB
Hynix
-
AE32G1339U1-U
AE34G1339U2-U
78.A1GC6.9L1
2GB
4GB
2GB
4GB
2GB
4GB
4GB
1GB
2GB
4GB
AMD
1.5
AMD
AMD
1.5
Apacer
Apacer
Asint
Apacer
Apacer
ASint
-
-
-
-
-
-
-
-
-
-
78.B1GDE.9L10C
SLA302G08-EDJ1C
SLZ302G08-EDJ1C
AQ12M72E8BKH9S
D3U1333-1G
Asint
ASint
302G08-DJ1C
ATP
SAMSUNG
Elpida
K4B2G0846C( ECC)
J1108BFBG-DJ-F
J1108BFBG-DJ-F
NT5CB256M8 BN-CG
N/A
BUFFALO
BUFFALO
BUFFALO
CORSAIR
CORSAIR
D3U1333-2G
Elpida
D3U1333-4G
NANYA
-
CMV4GX3M2A1333C9
CMV8GX3M2A1333C9
4GB (2x2GB) SS
8GB (2x4GB) DS
9-9-9-24
9-9-9-24
-
N/A
CMX8GX3M1A 1333C9
(Ver2.2)
CORSAIR
CORSAIR
8GB
8GB
DS
DS
-
-
-
-
-
-
9-9-9-24 1.5
9-9-9-24 1.5
•
•
•
CMX8GX3M1A1 333C9
(Ver3.23)
CMX8GX3M2A1
333C9(XMP)
CORSAIR
CORSAIR
8GB (2x4GB) DS
9-9-9-24 1.5
9-9-9-24 1.5
•
•
TW3X4G1333C9A
4GB (2x2GB) DS
4GB (2x2GB) DS
-
-
•
•
•
•
•
EK Memory EKM324L28BP8-I13
Elixir
-
-
9
-
-
-
-
M2F2G64CB88G7N-CG 2GB
SS
DS
Elxir
N2CB2G80GN-CG
J2108BCSE-DJ-F
D3 128M8CE9 2GB
ELPIDA
G.SKILL
EBJ41UF8BCF0-DJ-F
F3-10600CL9D-4GBNT
4GB
ELPIDA
G.SKILL
-
4GB (2x2GB) DS
9-9-9-24 1.5
•
F3-10666CL7D-
8GBRH(XMP)
G.SKILL
G.SKILL
8GB (2x4GB) DS
-
-
-
-
7-7-7-21 1.5
•
•
F3-10666CL8D-
4GBHK(XMP)
4GB (2x2GB) DS
8-8-8-21 1.5
G.SKILL
G.SKILL
G.SKILL
GEIL
F3-10666CL9D-8GBRL
F3-10666CL9D-8GBRL
F3-10666CL9D-8GBXL
GB34GB1333C7DC
GET316GB1333C9QC
GG34GB1333C9DC
GG34GB1333C9DC
GVP34GB1333C9DC
GVP38GB1333C9DC
GR1333D364L9/2G
HMT125U6TFR8A-H9
HMT325U6BFR8C-H9
M3UN-2GHJBC09
M3UN-4GHJAC09
FLFD45F-B8KL9
8GB (2x4GB) DS
8GB (2x4GB) DS
8GB (2x4GB) DS
4GB (2x2GB) DS
16GB (4x4GB) DS
4GB (2x2GB) DS
4GB (2x2GB) DS
4GB (2x2GB) DS
8GB (2x4GB) DS
-
-
9-9-9-24 1.5
9-9-9-24 1.5
9-9-9-24 1.5
7-7-7-24 1.5
9-9-9-24 1.5
9-9-9-24 1.3
9-9-9-24 1.3
9-9-9-24 1.5
9-9-9-24 1.5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
-
-
-
GEIL
GL1L128M88 BA15FW
-
GEIL
-
GEIL
GEIL
GL1L128M88 BA115FW
GL1L128M88 BA15B
-
GEIL
GEIL
GEIL
-
GEIL
-
-
GoodRam
Hynix
2GB
2GB
2GB
2GB
4GB
1GB
2GB
2GB
2GB
2GB
4GB
4GB
4GB
4GB
4GB
8GB
4GB
2GB
2GB
DS
DS
SS
SS
DS
SS
DS
SS
SS
SS
DS
DS
DS
DS
DS
DS
SS
DS
DS
Qimonda
Hynix
IDSH1G-03A1F1C-13H
H5TC1G83TFR
H5TQ2G83BFR
H5TQ2G83C FRH9C
H5TQ2G83C FRH9C
KFB8FNLXF-BNF-15A
KFB8FNLXL-BNF-15A
KFC8FNLBF-GXX-12A
KFC8FNLXF-DXX-15A
KFC8FNMXF-BXX-15A
KFC8FNLBF-GXX-12A
KFC8FNLXF-DXX-15A
KFC8FNMXF-BXX-15A
J2108ECSE-DJ-F
J2108BDBG-GN-F
J4208EASE-DJ-F
J4208BBBG-GN-F
-
-
-
-
Hynix
Hynix
-
-
INNODISK
INNODISK
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
Hynix
9-9-9-24
-
•
•
Hynix
9-9-9-24
-
KINGMAX
KINGMAX
KINGMAX
KINGMAX
Kingmax
KINGMAX
KINGMAX
Kingmax
Elpida
ELPIDA
ELPIDA
ELPIDA
-
-
-
-
-
-
-
-
9
-
-
FLFE85F-B8KL9
-
•
•
•
•
•
•
•
•
•
•
•
•
•
FLFE85F-C8KL9
-
FLFE85F-C8KL9
-
FLFE85F-C8KM9
-
FLFF65F-C8KL9
-
FLFF65F-C8KL9
-
FLFF65F-C8KM9
-
KINGSTON KVR1333D3E9S/4G
KINGSTON KVR1333D3N9H/4G
KINGSTON KVR1333D3N9H/8G
KINGSTON KVR13N9S8H/4
KINGTIGER F10DA2T1680
1.5
1.5
9-9-9-24 1.5
-
-
-
1.5
KING TIGER KTG1333PS 1208NST-C9
-
-
KINGTIGER KTG2G1333PG3
-
-
(continued on the next page)
1-17
ASUS Z87-DELUXE
DDR3 1333 MHz capability
DIMM socket
support
(Optional)
SS/
DS
Vendors
Part No.
Size
Chip Brand
Chip NO.
Timing
Voltage
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
•
Mach Xtreme MXD3U133316GQ
Mach Xtreme MXD3V23332GS
16GB (4x4GB) DS
-
-
-
-
2GB
SS
DS
SS
DS
DS
DS
DS
DS
Mach Xtreme C2S46D30-D313
-
-
•
MICRON
MICRON
OCZ
MT16JTF1G64AZ-1G4D1
8GB
MICRON
D9PCP
-
-
MT8JTF25664AZ-1G4M1
OCZ3G1333LV4GK
OCZ3G1333LV8GK
OCZ3G1333LV8GK
OCZ3RPR1333C9 LV8GK
PG38G1333EL (XMP)
PGD316G1333EL K(XMP)
PGS34G1333LLKA
2GB
MICRON
D9PFJ
-
-
•
4GB (2x2GB)
8GB (2x4GB)
8GB (2x4GB)
8GB (2x4GB)
8GB
-
-
9-9-9
9-9-9
9-9-9
9-9-9
-
1.65
1.65
1.65
1.65
1.5
OCZ
-
-
OCZ
-
-
OCZ
-
-
Patriot
-
-
•
•
•
•
•
•
•
Patriot
16GB (2x8GB) DS
-
-
9-9-9-24 1.5
7-7-7-20 1.7
Patriot
4GB (2x2GB)
2GB
DS
DS
DS
DS
DS
DS
SS
SS
SS
DS
SS
DS
DS
DS
DS
-
-
Patriot
PSD32G13332
Prtriot
PM128M8D3 BU-15
C304627CB1A G22Fe
E304459CB1 AG32Cf
K4B2G0846C
K4B2G08460
K4B2G08460
NT5CB128M 8AN-CG
10YT3E5
9
-
-
-
-
-
-
-
-
-
-
-
-
-
-
RiDATA
RiDATA
SAMSUNG
SAMSUNG
SAMSUNG
C304627CB1AG22Fe
E304459CB1AG32Cf
M378B5273CH0-CH9
M378B5273DH0-CH9
M378B5773DH0-CH9
2GB
RiDATA
RiDATA
SAMSUNG
SAMSUNG
SAMSUNG
NANYA
S-POWER
NANYA
S-POWER
S-POWER
Team
9
4GB
9
4GB
-
4GB
-
2GB
-
Silicon Power SP001GBLTE133S01
Silicon Power SP001GBLTU133S02
Silicon Power SP002GBLTE133S01
Silicon Power SP002GBLTU133V02
Silicon Power SP004GBLTU133V02
1GB
-
•
•
•
•
•
1GB
9
2GB
NT5CB128M8 AN-CG
20YT3NG
-
2GB
9-9-9-24
4GB
20YT3NG
9-9-9-24
Team
TED34096M1333HC9
TED38G1333HC9BK
JM1333KLH-8G(623654)
4GB
T3D2568LT-13
-
-
Team
8GB
-
9-9-9-24
-
Transcend
8GB
Transcend
TK963EB F3
•
Side(s): SS - Single-sided DS - Double-sided DIMM support:
(1) Supports one (1) module inserted into any slot as Single-channel memory
configuration. We suggest that you install the module into A2 slot.
(2) Supports two (2) modules inserted into either the yellow slots or the dark brown slots
as one pair of Dual-channel memory configuration. We suggest that you install the
modules into slots A2 and B2 for better compatibility.
(4) Supports four (4) modules inserted into both the yellow slots and dark brown slots as
two pairs of Dual-channel memory configuration.
•
•
ASUS exclusively provides hyper DIMM support function.
Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load
the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.
•
Visit the ASUS website for the latest QVL.
1-18
Chapter 1: Product introduction
1.2.5
Expansion slots
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
Slot No. Slot Description
1
2
3
4
5
6
7
PCIe 2.0 x1_1 slot
PCIe 3.0 x16_1 slot
PCIe 2.0 x1_2 slot
PCIe 2.0 x1_3 slot
PCIe 3.0 x16_2 slot
PCIe 2.0 x1_4
PCIe 2.0 x16_3 slot
1-19
ASUS Z87-DELUXE
PCIe Express 3.0 operating mode
VGA configuration
PCIe 3.0/2.0 x16_1
PCIe 3.0/2.0 x16_2
x16 (single VGA
recommended)
Single VGA/PCIe card
Dual VGA/PCIe card
N/A
x8
x8
•
We recommend that you provide sufficient power when running CrossFireX™ or SLI™
mode.
•
Connect a chassis fan to the motherboard connector labeled CHA_FAN1-4 when
using multiple graphics cards for better thermal environment.
IRQ assignments for this motherboard
A
B
C
D
E
F
G
H
PCIe x16_1
shared
–
–
–
–
–
–
–
PCIe x16_2
PCIe x16_3
PCIe x1_1
–
shared
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
shared
–
–
–
–
–
–
–
shared
–
PCIe x1_2
–
shared
–
–
–
PCIe x1_3
–
–
–
–
–
–
–
–
–
shared
–
PCIe x1_4
shared
–
–
–
SMBUS Controller
–
shared
–
–
Wi-Fi
–
shared
–
–
Intel® SATA Controller
Intel® LAN
Realtek® LAN
–
–
–
–
–
shared
–
shared
–
–
–
shared
ASMedia SATA
Controller 1
ASMedia SATA
–
shared
–
–
–
–
–
–
–
–
–
–
–
–
–
shared
Controller 2
Intel® xHCI
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
shared
–
–
Intel® EHCI 1
Intel® EHCI 2
HD Audio
–
shared
–
–
–
–
–
–
shared
–
–
shared
1-20
Chapter 1: Product introduction
1.2.6
Onboard buttons and switches
Onboard switches and buttons allow you to fine-tune performance when working on a bare or
open-case system. This is ideal for overclockers and gamers who continually change settings
to enhance system performance.
1.
Power-on button
The motherboard comes with a power-on button that allows you to power up or wake
up the system. The button also lights up when the system is plugged to a power source
indicating that you should shut down the system and unplug the power cable before
removing or installing any motherboard component.
2.
Reset button
Press the reset button to reboot the system.
1-21
ASUS Z87-DELUXE
3.
MemOK! button
Installing DIMMs that are not compatible with the motherboard may cause system
boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press
and hold the MemOK! button until the DRAM_LED starts blinking to begin automatic
memory compatibility tuning for successful boot.
•
•
Refer to section 1.2.7 Onboard LEDs for the exact location of the DRAM_LED.
The DRAM_LED also lights up when the DIMM is not properly installed. Turn off the
system and reinstall the DIMM before using the MemOK! function.
•
•
The MemOK! switch does not function under Windows® OS environment.
During the tuning process, the system loads and tests failsafe memory settings. It
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the DRAM_LED increases, indicating different test processes.
•
Due to memory tuning requirement, the system automatically reboots when each
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the DRAM_LED lights continuously. Replace the DIMMs with ones
recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on
the ASUS website at www.asus.com.
•
•
•
If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
If your system fails to boot up due to BIOS overclocking, press the MemOK! switch
to boot and load the BIOS default settings. A message will appear during POST
reminding you that the BIOS has been restored to its default settings.
We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.
1-22
Chapter 1: Product introduction
4.
DirectKey button
This feature allows your system to go to the BIOS Setup program with the press of a
button. With DirectKey, you can enter the BIOS anytime without having to press the
<Delete> key during POST. It also allows you to turn on or turn off your system and
conveniently enter the BIOS during boot-up.
Ensure to save your data before using the DirectKey button.
•
When the system is on and you press the DirectKey button, your system will shut
down. Press the DirectKey button again or the Power-on button to reboot and enter
the BIOS directly.
•
•
Turn off your system using the power-on button to allow your system to go through
POST (without entering the BIOS) when you reboot your system.
Refer to section 3.8 Boot Menu for details about setting the DirectKey default
function.
1-23
ASUS Z87-DELUXE
5.
TPU switch
With its two-level adjustment functions, the TPU allows you to automatically adjusts the
CPU ratio and clock speed for an optimal system performance.
•
•
Enable this switch when the system is powered off.
When the TPU switch is set to Enabled (CPU Ratio Boost), the system automatically
adjusts the CPU ratio for an enhanced performance.
•
When the TPU switch is set to Enabled (CPU BCLK and Ratio Boost), the system
automatically adjusts the base clock rate (BLCK) and the CPU ratio for a more
enhanced performance.
TPU_I
TPU_II
•
•
•
The TPU LED (TPU_LED) near the TPU switch lights up when the TPU switch is
enabled. Refer to section 1.2.7 Onboard LEDs for the exact location of the TPU LED.
If you enable this switch under Windows® OS environment, the TPU function will be
activated after the next system bootup.
You may use the 4-Way Optimization and TPU feature in the AI Suite 3 application,
adjust the BIOS setup program or enable the TPU switch at the same time. However,
the system will use the last setting you have made.
1-24
Chapter 1: Product introduction
6.
EPU switch
Enable this switch to automatically detect the current PC loadings and intelligently
moderate the power consumption.
Enable this switch when the system is powered off.
•
•
•
The EPU LED (OLED2) near the EPU switch lights up when the EPU switch is
enabled. Refer to section 1.2.7 Onboard LEDs for the exact location of the EPU LED.
If you enable this switch under Windows® OS environment, the EPU function will be
activated after the next system bootup.
You may change the EPU settings in the software application or BIOS setup program
and enable the EPU function at the same time. However, the system will use the last
setting you have made.
1-25
ASUS Z87-DELUXE
7.
Clear CMOS button
Press this button to clear the BIOS setup information only when the systems hangs
due to overclocking.
1-26
Chapter 1: Product introduction
1.2.7
Onboard LEDs
1.
POST State LEDs
The POST State LEDs provide the status of these key components during POST
(Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drive.s If an
error is found, the critical component’s LED stays lit up until the problem is solved.
2.
TPU LED
The TPU LED lights up when the TPU switch is enabled.
1-27
ASUS Z87-DELUXE
3.
EPU LED
The EPU LED lights up when the EPU switch is enabled.
4.
Q-Code LEDs
The Q-Code LED design provides you with a 4-digit error code that displays the system
status. Refer to the Q-Code table on the next page for details.
1-28
Chapter 1: Product introduction
Q-Code table (under POST)
Code
00
Description
Not used
01
Power on. Reset type detection (soft/hard).
AP initialization before microcode loading
System Agent initialization before microcode loading
PCH initialization before microcode loading
Microcode loading
02
03
04
06
07
AP initialization after microcode loading
System Agent initialization after microcode loading
PCH initialization after microcode loading
Cache initialization
08
09
0B
0C – 0D
0E
Reserved for future AMI SEC error codes
Microcode not found
0F
Microcode not loaded
10
PEI Core is started
11 – 14
15 – 18
19 – 1C
2B – 2F
30
Pre-memory CPU initialization is started
Pre-memory System Agent initialization is started
Pre-memory PCH initialization is started
Memory initialization
Reserved for ASL (see ASL Status Codes section below)
Memory Installed
31
32 – 36
37 – 3A
3B – 3E
4F
CPU post-memory initialization
Post-Memory System Agent initialization is started
Post-Memory PCH initialization is started
DXE IPL is started
Memory initialization error. Invalid memory type or incompatible memory
speed
50 – 53
54
Unspecified memory initialization error
Memory not installed
55
56
Invalid CPU type or Speed
57
CPU mismatch
58
CPU self test failed or possible CPU cache error
CPU micro-code is not found or micro-code update is failed
Internal CPU error
59
5A
5B
Reset PPI is not available
5C – 5F
E0
Reserved for future AMI error codes
S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
S3 Boot Script execution
E1
E2
Video repost
E3
OS S3 wake vector call
E4 – E7
E8
Reserved for future AMI progress codes
S3 Resume Failed
E9
S3 Resume PPI not Found
(continued on the next page)
1-29
ASUS Z87-DELUXE
Code
EA
Description
S3 Resume Boot Script Error
S3 OS Wake Error
EB
EC – EF
F0
Reserved for future AMI error codes
Recovery condition triggered by firmware (Auto recovery)
Recovery condition triggered by user (Forced recovery)
Recovery process started
F1
F2
F3
Recovery firmware image is found
Recovery firmware image is loaded
Reserved for future AMI progress codes
Recovery PPI is not available
Recovery capsule is not found
Invalid recovery capsule
F4
F5 – F7
F8
F9
FA
FB – FF
60
Reserved for future AMI error codes
DXE Core is started
61
NVRAM initialization
62
Installation of the PCH Runtime Services
CPU DXE initialization is started
PCI host bridge initialization
63 – 67
68
69
System Agent DXE initialization is started
System Agent DXE SMM initialization is started
System Agent DXE initialization (System Agent module specific)
PCH DXE initialization is started
PCH DXE SMM initialization is started
PCH devices initialization
6A
6B – 6F
70
71
72
73 – 77
78
PCH DXE Initialization (PCH module specific)
ACPI module initialization
79
CSM initialization
7A – 7F
90
Reserved for future AMI DXE codes
Boot Device Selection (BDS) phase is started
Driver connecting is started
91
92
PCI Bus initialization is started
PCI Bus Hot Plug Controller Initialization
PCI Bus Enumeration
93
94
95
PCI Bus Request Resources
PCI Bus Assign Resources
96
97
Console Output devices connect
Console input devices connect
Super IO Initialization
98
99
9A
USB initialization is started
9B
USB Reset
9C
USB Detect
9D
USB Enable
(continued on the next page)
1-30
Chapter 1: Product introduction
Code
9E – 9F
A0
Description
Reserved for future AMI codes
IDE initialization is started
IDE Reset
A1
A2
IDE Detect
A3
IDE Enable
A4
SCSI initialization is started
SCSI Reset
A5
A6
SCSI Detect
A7
SCSI Enable
A8
Setup Verifying Password
Start of Setup
A9
AA
AB
AC
AD
AE
AF
B0
Reserved for ASL (see ASL Status Codes section below)
Setup Input Wait
Reserved for ASL (see ASL Status Codes section below)
Ready To Boot event
Legacy Boot event
Exit Boot Services event
Runtime Set Virtual Address MAP Begin
Runtime Set Virtual Address MAP End
Legacy Option ROM Initialization
System Reset
B1
B2
B3
B4
USB hot plug
B5
PCI bus hot plug
B6
Clean-up of NVRAM
B7
Configuration Reset (reset of NVRAM settings)
Reserved for future AMI codes
CPU initialization error
B8– BF
D0
D1
System Agent initialization error
PCH initialization error
D2
D3
Some of the Architectural Protocols are not available
PCI resource allocation error. Out of Resources
No Space for Legacy Option ROM
No Console Output Devices are found
No Console Input Devices are found
Invalid password
D4
D5
D6
D7
D8
D9
Error loading Boot Option (LoadImage returned error)
Boot Option is failed (StartImage returned error)
Flash update is failed
DA
DB
DC
Reset protocol is not available
(continued on the next page)
1-31
ASUS Z87-DELUXE
ACPI/ASL Checkpoints (under OS)
Code
03
Description
System is entering S3 sleep state
04
System is entering S4 sleep state
05
System is entering S5 sleep state
30
System is waking up from the S3 sleep state
System is waking up from the S4 sleep state
System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
40
AC
AA
1-32
Chapter 1: Product introduction
1.2.8
1.
Internal connectors
Intel® Z87 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [yellow])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z87
chipset.
•
•
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.6.3 SATA Configuration for details.
Before creating a RAID set, refer to section 5.1 RAID configurations or the manual
bundled in the motherboard support DVD.
1-33
ASUS Z87-DELUXE
2.
ASMedia® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E12/E34 [dark brown])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
•
•
ASMedia storage controller can only support AHCI mode.
These SATA ports are for data drives only.
3.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The S/PDIF module is purchased separately.
1-34
Chapter 1: Product introduction
4.
USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front
or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for
USB-chargeable devices, optimized power efficiency, and backward compatibility with
USB 2.0.
•
The USB 3.0 module is purchased separately.
•
These connectors are based on xHCI specification. We recommend you to install the
related driver to fully use the USB 3.0 ports under Windows® 7.
•
The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the
operating system’s setting.
1-35
ASUS Z87-DELUXE
5.
USB 2.0 connectors (10-1 pin USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
48 MBps connection speed.
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, dark brown)
first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis
supports front panel USB ports.
•
The USB 2.0 module is purchased separately.
•
These connectors are based on xHCI specification. We recommend you to install the
related driver to fully use the USB 2.0 ports under Windows® 7.
1-36
Chapter 1: Product introduction
6.
CPU, optional, and chassis fan connectors
(4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin CHA_FAN1-4)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Detection latch
•
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
•
Ensure that the CPU fan is securely installed to the CPU fan connector.
•
•
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
The CPU_FAN connector and CHA_FAN connectors support the ASUS FAN Xpert 2
feature.
1-37
ASUS Z87-DELUXE
7.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
•
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
If you want to connect a high-definition or an AC’97 front panel audio module to this
connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97].
1-38
Chapter 1: Product introduction
8.
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
•
DO NOT forget to connect the 4-pin/8-pin EATX12 V power plug. Otherwise, the
system will not boot.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
•
If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
1-39
ASUS Z87-DELUXE
9.
System panel connector (20-8 pin PANEL)
This connector supports several chassis-mounted functions.
•
•
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD LED lights up or flashes when data is read from or written
to the HDD.
•
•
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power button turns the
system on or puts the system in sleep or soft-off mode depending on the operating
system settings. Pressing the power switch for more than four seconds while the
system is ON turns the system OFF.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
1-40
Chapter 1: Product introduction
10. TPM connector (20-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which securely
store keys, digital certificates, passwords and data. A TPM system also helps enhance
network security, protect digital identities, and ensures platform integrity.
11. Direct Connector (2-pin DRCT)
This connector is for the chassis-mounted button that supports the DirectKey function.
Connect the button cable that supports DirectKey, from the chassis to this connector on
the motherboard.
Ensure that your chassis comes with the extra button cable that supports the DirectKey
feature. Refer to the technical documentation that came with the chassis for details.
1-41
ASUS Z87-DELUXE
1-42
Chapter 1: Product introduction
Chapter 2:
Basic installation
Basic installation
2
2.1
Building your PC system
2.1.1
Motherboard installation
The diagrams in this section are for reference only. The motherboard layout may vary with
models, but the installation steps are the same for all models.
1.
Install the ASUS Q-Shield to the chassis rear I/O panel.
2.
Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to
the chassis’ rear I/O panel.
2-1
ASUS Z87-DELUXE
3.
Place nine screws into the holes indicated by circles to secure the motherboard to the
chassis.
DO NOT overtighten the screws! Doing so can damage the motherboard.
2-2
Chapter 2: Basic installation
To uninstall the CPU heatsink and fan assembly
2-5
ASUS Z87-DELUXE
2.1.9
Wi-Fi antenna installation
Installing the ASUS 2T2R dual band W-Fi antenna
Connect the bundled ASUS 2T2R dual band Wi-Fi antenna connector to the Wi-Fi ports at
the back of the chassis.
KY
IN
LNIE
CRT
BSA
S
FRONT
ERA
UBS3.0
SP/DIF
UBIOSFlshback
U
MCIN
PWOEReSTA6G
IO Shield
•
•
Ensure that the ASUS 2T2R dual band Wi-Fi antenna is securely installed to the Wi-Fi
ports.
Ensure to install the Wi-Fi driver before installing the Wi-Fi GO! software.
2-11
ASUS Z87-DELUXE
2.2
BIOS update utility
USB BIOS Flashback
USB BIOS Flashback allows you to easily update the BIOS without entering the existing
BIOS or operating system. Simply insert a USB storage device to the USB port, press the
USB BIOS Flashback button for three seconds, and the BIOS is updated automatically.
To use USB BIOS Flashback:
1.
Place the bundled support DVD to the optical drive and install the USB BIOS
Flashback Wizard. Follow the onscreen instructions to complete the installation.
2.
Insert the USB storage device to the USB Flashback port.
We recommend you to use a USB 2.0 storage device to save the latest BIOS version for
better compatibility and stability.
3.
4.
5.
Launch the USB BIOS Flashback Wizard to automatically download the latest BIOS
version.
Press the BIOS Flashback button for three seconds until a flashing light appears, which
indicates that the BIOS Flashback function is enabled.
Wait until the light goes out, indicating that the BIOS updating process is completed.
USB BIOS Flashback port
USB BIOS Flashback button
For more BIOS update utilities in BIOS setup, refer to the section 3.11 Updating BIOS in
Chapter 3.
•
Do not unplug portable disk, power system, or press the CLR_CMOS button while
BIOS update is ongoing, otherwise update will be interrupted. In case of interruption,
please follow the steps again.
•
If the light flashes for five seconds and turns into a solid light, this means that the
BIOS Flashback is not operating properly. This may be caused by improper installation
of the USB storage device and filename/file format error. If this scenario happens,
please restart the system to turn off the light.
•
Updating BIOS may have risks. If the BIOS program is damaged during the process
and results to the system’s failure to boot up, please contact your local ASUS Service
Center.
2-12
Chapter 2: Basic installation
2.3
Motherboard rear and audio connections
Rear I/O connection
2.3.1
Rear panel connectors
1. USB 3.0 ports E34 support ASUS
USB 3.0 Boost Turbo Mode
8.
9.
HDMI port
2. Optical S/PDIF Out port
USB BIOS Flashback button
3. Wi-Fi 802.11 a/b/g/n/ac
Bluetooth V4.0/3.0 + HS*
10. USB 2.0 ports 1-4
4. Intel® LAN (RJ-45) port**
11. USB 3.0 ports E12, support ASUS USB
3.0 Boost Turbo Mode. Bottom port
supports USB BIOS Flashback and USB
Charger+
5. Realtek® LAN (RJ-45) port**
12. USB 3.0 ports 7 and 8, support ASUS
USB 3.0 Boost Turbo Mode.
6. Mini DisplayPort
7. DisplayPort
13. Audio I/O ports***
*, ** and ***: Refer to the tables on the next page for Bluetooth/Wi-Fi module LEDs, LAN port LEDs, and audio port
definitions.
2-13
ASUS Z87-DELUXE
•
The plugged USB 3.0 device may run on xHCI or EHCI mode, depending on the
operating system’s setting.
•
•
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
•
Due to the design of the Intel® 8 series chipset, all USB devices connected to the
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
•
•
Multi-VGA output supports up to three displays under Windows® OS environment, two
displays under BIOS, and one display under DOS.
Intel display architecture design supports the following maximum supported pixel
clocks (Pixel Clock = H total x V Total x Frame Rate (Screen refresh rate)):
-
-
DisplayPort/mini DisplayPort: 533 MHz
HDMI port: 300 MHz
* Bluetooth and Wi-Fi module LED indications
Wi-Fi LED
Status
Off
Bluetooth LED
Status
Off
Description
No link
Linked
No link
Bluetooth
LED
Wi-Fi
LED
Green
Blue
Linked
Blinking
Data activity
Wi-Fi 802.11 a/b/g/n/ac,
Bluetooth v4.0/3.0 + HS
* The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such mark by ASUSTeK
Computer Inc. is under license. Other trademarks and trade names are those of their respective owners.
** LAN ports LED indications
Activity Link LED
Speed LED
Status
Description
No link
Status Description
ACT/LINK
LED
SPEED
LED
Off
Off
10 Mbps connection
Orange
Linked
Orange 100 Mbps connection
Green 1 Gbps connection
Orange (Blinking)
Data activity
Orange (Blinking
then steady)
Ready to wake up
from S5 mode
LAN port
2-14
Chapter 2: Basic installation
*** Audio 2, 4, 6, or 8-channel configuration
Port
Headset
4-channel
6-channel
8-channel
2-channel
Light Blue Line In
Line In
Line In
Line In
Lime
Line Out
Front Speaker Out Front Speaker Out
Front Speaker Out
Mic In
Pink
Mic In
Mic In
Mic In
Orange
Black
Gray
–
–
–
–
Center/Subwoofer
Rear Speaker Out
–
Center/Subwoofer
Rear Speaker Out
Side Speaker Out
Rear Speaker Out
–
2.3.2
Audio I/O connections
Audio I/O ports
Connect to Headphone and Mic
Connect to Stereo Speakers
2-15
ASUS Z87-DELUXE
Connect to 2.1 channel Speakers
Connect to 4.1 channel Speakers
Connect to 5.1 channel Speakers
2-16
Chapter 2: Basic installation
Connect to 7.1 channel Speakers
When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the
gray port.
2.4
1.
Starting up for the first time
After making all the connections, replace the system case cover.
2.
Ensure that all switches are off.
3.
Connect the power cord to the power connector at the back of the system chassis.
Connect the power cord to a power outlet that is equipped with a surge protector.
Turn on the devices in the following order:
4.
5.
a.
b.
c.
Monitor
External SCSI devices (starting with the last device on the chain)
System power
6.
After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests (POST). While the tests are running, the
BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
2-17
ASUS Z87-DELUXE
BIOS Beep
Description
One short beep
VGA detected
Quick boot set to disabled
No keyboard detected
No memory detected
One continuous beep followed by two
short beeps then a pause (repeated)
One continuous beep followed by three
short beeps
No VGA detected
One continuous beep followed by four
short beeps
Hardware component failure
7.
At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 3.
2.5
Turning off the computer
While the system is ON, press the power button for less than four seconds to put the system
on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch
for more than four seconds to let the system enter the soft-off mode regardless of the BIOS
setting.
2-18
Chapter 2: Basic installation
Chapter 3:
BIOS setup
BIOS setup
3
3.1
Knowing BIOS
The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI
architecture, offering a user-friendly interface that goes beyond the traditional keyboard-
only BIOS controls to enable a more flexible and convenient mouse input. You can easily
navigate the new UEFI BIOS with the same smoothness as your operating system. The
term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot
device configuration that are needed for system startup in the motherboard CMOS. In
normal circumstances, the default BIOS settings apply to most conditions to ensure
optimal performance. DO NOT change the default BIOS settings except in the following
circumstances:
•
An error message appears on the screen during the system bootup and requests you to
run the BIOS Setup.
•
You have installed a new system component that requires further BIOS settings or
update.
Inappropriate BIOS settings may result to instability or boot failure. We strongly
recommend that you change the BIOS settings only with the help of a trained service
personnel.
When downloading or updating the BIOS file, rename it as Z87D.CAP for this motherboard.
3-1
ASUS Z87-DELUXE
3.2
BIOS setup program
Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen
include navigation keys and brief onscreen help to guide you in using the BIOS Setup
program.
Entering BIOS at startup
To enter BIOS Setup at startup:
•
Press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>,
POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
•
•
Press <Ctrl>+<Alt>+<Delete> simultaneously.
Press the reset button on the system chassis.
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
•
•
•
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey <F5>. See section 3.10 Exit Menu
for details.
•
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 1.2.6 Onboard buttons and
switches for information on how to erase the RTC RAM via the Clear CMOS button.
The BIOS setup program does not support the bluetooth devices.
BIOS menu screen
The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode screen.
3-2
Chapter 3: BIOS setup
3.2.1
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press <F7> hot
key for the advanced BIOS settings.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 3.8 Boot menu for details.
Exits the BIOS setup program
Displays the CPU/motherboard
temperature, CPU/5V/3.3V/12V voltage
output, CPU/chassis/power fan speed
without saving the changes, saves
the changes and resets the system,
or enters the Advanced Mode
Selects the display language
of the BIOS setup program
Selects the boot
device priority
Loads optimized
default settings
Displays the selected
shortcut items
Displays the Advanced
mode menus
Displays the system properties of the
selected mode on the right hand side
Selects the boot
device priority
•
•
The boot device options vary depending on the devices you installed to the system.
The Boot Menu (F8) button is available only when the boot device is installed to the
system.
3-3
ASUS Z87-DELUXE
3.2.2
Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure
the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.
To access the Advanced Mode, click Exit, then select Advanced Mode or press F7 hotkey.
Menu bar
General help
Back button
Menu items
Submenu item
Configuration fields
Last modified
settings
Pop-up window
Navigation keys
Scroll bar
Quick note
Menu bar
The menu bar on top of the screen has the following main items:
My Favorites For saving the frequently-used system settings and configuration.
Main
For changing the basic system configuration
For changing the overclocking settings
For changing the advanced system settings
Ai Tweaker
Advanced
For displaying the system temperature, power status, and changing the
fan settings.
Monitor
Boot
Tool
Exit
For changing the system boot configuration
For configuring options for special functions
For selecting the exit options and loading default settings
3-4
Chapter 3: BIOS setup
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (My Favorites, Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the
menu bar have their respective menu items.
Back button
This button appears when entering a submenu. Press <Esc> or use the USB mouse to click
this button to return to the previous menu screen.
Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press <Enter>.
Pop-up window
Select a menu item and press <Enter> to display a pop-up window with the configuration
options for that item.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on
the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the
other items on the screen.
Navigation keys
At the bottom right corner of the menu screen are the navigation keys for the BIOS setup
program. Use the navigation keys to select items in the menu and change the settings.
For the F3: Shortcut navigation key, the shortcut items are in English. If you delete the
shortcuts including the default shortcuts, the default shortcuts will reappear after your next
startup.
General help
At the top right corner of the menu screen is a brief description of the selected item. Use
<F12> key to capture the BIOS screen and save it to the removable storage device.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press <Enter> to display a list of options.
Quick Note button
This button allows you to enter notes of the activities that you have done in BIOS.
•
•
The Quick Note function does not support the following keyboard functions: delete,
cut, copy and paste.
You can only use the alphanumeric characters to enter your notes.
3-5
ASUS Z87-DELUXE
Last Modified button
This button shows the items that you last modified and saved in BIOS Setup.
3.3
My Favorites
MyFavorites is your personal space where you can easily save and access your favorite
BIOS items.
Adding items to My Favorites
To add frequently-used BIOS items to My Favorites:
1.
Use the arrow keys to select an item that you want to add. When using a mouse, hover
the pointer to the item.
2.
Press <F4> on your keyboard or right-click on your mouse to add the item to My
Favorites page.
You cannot add the following items to My Favorites:
•
•
•
Items with submenu options
User-configurable items such as language and boot device order
Configuration items such as Memory SPD Information, system time and date
3-6
Chapter 3: BIOS setup
3.4
Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Security
The Security menu items allow you to change the system security settings.
•
•
If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.2.6 Onboard buttons and switches
for information on how to erase the RTC RAM via the Clear CMOS button.
The Administrator or User Password items on top of the screen show the default [Not
Installed]. After you set a password, these items show [Installed].
3-7
ASUS Z87-DELUXE
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator
password for accessing the system. Otherwise, you might be able to see or change only
selected fields in the BIOS setup program.
To set an administrator password:
1.
2.
3.
Select the Administrator Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
To change an administrator password:
1.
2.
Select the Administrator Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press
<Enter>.
3.
From the Create New Password box, key in a new password, then press <Enter>.
4.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator
password, but press <Enter> when prompted to create/confirm the password. After you clear
the password, the Administrator Password item on top of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set a
password, this item shows Installed.
To set a user password:
1.
2.
3.
Select the User Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
3-8
Chapter 3: BIOS setup
To change a user password:
1.
2.
Select the User Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press
<Enter>.
3.
From the Create New Password box, key in a new password, then press <Enter>.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
3.5
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display other BIOS items.
3-9
ASUS Z87-DELUXE
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
Loads the optimal settings for the system.
[Manual]
[X.M.P.]
Allows you to automatically optimize the CPU ratio and BCLK frequency.
Allows your system to automatically optimize the CPU ratio, BCLK
frequency, and memory parameters. If you install memory modules
supporting the eXtreme Memory Profile (X.M.P.) Technology, select this
item to set the profiles supported by your memory modules for optimizing
the system performance.
The following item appears only when you set the Ai Overclocking Tuner to [Manual].
Filter PLL [Auto]
Allows you to select a BCLK (base clock) mode when running in a high or low BCLK.
Configuration options: [Auto] [Low BCLK Mode] [High BCLK Mode]
BCLK/PEG Frequency [100.0]
Allows you to set the BCLK/PEG frequency to enhance the system performance. Use
the <+> or <-> keys to adjust the value. The values range from 80.0MHz to 300.0MHz.
The following item appears only when you set the Ai Overclocking Tuner to [X.M.P.].
eXtreme Memory Profile
Allows you to select the X.M.P. mode supported by your memory module.
Configuration options: [Profile #1] [Profile #2]
ASUS MultiCore Enhancement [Enabled]
[Enabled]
Default set to [Enabled] for maximum performance under XMP/Manual/
User-defined memory frequency mode.
[Disabled]
Allows you to set to default core ratio settings.
CPU Core Ratio [Sync All Cores]
Allows you to set the CPU ratio and synchronize automatically either per core or all cores.
Configuration options: [Auto] [Sync All Cores] [Per Core]
When the CPU Core Ratio is set to [Per Core], the following item appears:
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 1-Core Limit value that must be higher than or equal to the 2-Core
Ratio Limit.
2-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 2-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
3-10
Chapter 3: BIOS setup
If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit to [Auto].
3-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 3-Core Limit value that must be higher than or equal to the 4-Core
Ratio Limit.
If you assign a value for 3-Core Ratio Limit, do not set the 1-Core Ratio Limit and 2-Core
Ratio Limit to [Auto].
4-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 4-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
If you assign a value for 4-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, and 3-Core Ratio to [Auto].
Min CPU Cache Ratio [Auto]
Allows you to set the minimum possible ratio on the Uncore part of the processor. Use the
<+> or <-> keys to adjust the value. The values depend on the CPU installed.
Max CPU Cache Ratio [Auto]
Allows you to set the maximum possible ratio on the Uncore part of the processor. Use the
<+> or <-> keys to adjust the value. The values depend on the CPU installed.
Internal PLL Overvoltage [Auto]
Allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the extreme
overclocking capability.
Configuration options: [Auto] [Enabled] [Disabled]
CPU bus speed : DRAM speed ratio mode [Auto]
Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto]
DRAM speed is set to the optimized settings.
[100:133]
[100:100]
The CPU bus speed to DRAM speed ratio is set to 100:133.
The CPU bus speed to DRAM speed ratio is set to 100:100.
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary with the
BCLK/PCIE Frequency item settings.
CPU Graphics Max. Ratio [Auto]
[Auto]
Allows you to automatically optimize the CPU Graphics Ratio depending on
the system loading.
[Manual]
Allows you to set a value for an optimal CPU Grapics Ratio. Use the <+> or
<-> keys to adjust the CPU graphics ratio. The minimum value depends on
the installed CPU.
3-11
ASUS Z87-DELUXE
OC Tuner [As Is]
OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM for
enhancing the system performance and accelerates the iGPU performance to the extreme
according to the integrated graphics loading.
Configuration options: [As Is] [Ratio Only] [BCLK First]
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the <+> or
<-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and
press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM COMMAND Mode [Auto]
Configuration options: [Auto] [1] – [3]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [1] – [511]
DRAM Refresh Interval [Auto]
Configuration options: [Auto] [1] – [65535]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1] – [16]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [1] – [15]
3-12
Chapter 3: BIOS setup
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1] – [255]
DRAM WRITE to READ Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CKE Minimum pulse width [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CAS# Write Latency [Auto]
Configuration options: [Auto] [1] – [31]
RTL IOL control
DRAM RTL (CHA_R0D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R0D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R1D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHA_R1D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R0D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R0D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R1D0) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM RTL (CHB_R1D1) [Auto]
Configuration options: [Auto] [1] - [63]
DRAM IO-L (CHA_R0D0) [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R0D1) [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R1D0 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHA_R1D1 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHB_R0D0 [Auto]
Configuration options: [Auto] [1] - [15]
3-13
ASUS Z87-DELUXE
DRAM IO-L (CHB_R0D1) [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHB_R1D0 [Auto]
Configuration options: [Auto] [1] - [15]
DRAM IO-L (CHB_R1D1 [Auto]
Configuration options: [Auto] [1] - [15]
Third Timings
tRDRD [Auto]
Configuration options: [Auto] [1] – [7]
tRDRD_dr [Auto]
Configuration options: [Auto] [1] – [15]
tRDRD_dd [Auto]
Configuration options: [Auto] [1] – [15]
tWRRD [Auto]
Configuration options: [Auto] [1] – [63]
tWRRD_dr [Auto]
Configuration options: [Auto] [1] – [15]
tWRRD_dd [Auto]
Configuration options: [Auto] [1] – [15]
tWRWR [Auto]
Configuration options: [Auto] [1] – [7]
tWRWR_dr [Auto]
Configuration options: [Auto] [1] – [15]
tWRWR_dd [Auto]
Configuration options: [Auto] [1] – [15]
Dec_WRD
Configuration options: [Auto] [0] – [1]
tRDWR [Auto]
Configuration options: [Auto] [1] – [31]
tRDWR_dr [Auto]
Configuration options: [Auto] [1] – [31]
tRDWR_dd [Auto]
Configuration options: [Auto] [1] – [31]
3-14
Chapter 3: BIOS setup
MISC
MRC Fast Boot [Auto]
Allows you to enable, disable or automatically set the MRC fast boot.
Configuration options: [Auto] [Enable] [Disable]
DRAM CLK Period [Auto]
Configuration options: [Auto] [1] – [14]
Channel A/B DIMM Control [Enable Bot...]
Configuration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Scrambler Setting [Optimized ...]
Allows you to set the optimized scrambler setting for stability.
Configuration options: [Optimized (ASUS] [Default (MRC)]
DIGI+ Power Control
CPU Load-Line Calibration [Auto]
Load-line is defined by Intel® VRM specification and affects CPU power voltage. The
CPU working voltage will decrease proportionally to CPU loading. Higher load-line
calibration could get higher voltage and good overclocking performance, but increases
the CPU and VRM thermal conditions.
Select from Level 1 to Level 8 to adjust CPU power voltage from 0% to 100%.
The actual performance boost may vary depending on your CPU specification.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Voltage Frequency [Auto]
Frequency switching affects the VRM transient response and the thermal component
conditions. Higher frequency gets quicker transient response.
Configuration options: [Auto] [Manual]
DO NOT remove the thermal module when setting this item to [Manual Mode]. The thermal
conditions should be monitored.
The following item appears only when you set the CPU Voltage Frequency to [Manual].
CPU Fixed Frequency [300]
This item allows you to set a fixed CPU Voltage frequency. Use the <+> or
<-> keys to adjust the value. The values range from 300kHz to 500kHz with
a 50kHz interval.
3-15
ASUS Z87-DELUXE
The following items appear only when you set the CPU Voltage Frequency to [Auto].
VRM Spread Spectrum [Disabled]
Enable the VRM Spread Spectrum to enhance system stability.
Configuration options: [Disabled] [Enabled]
Active Frequency Mode [Disabled]
Enable the Active Frequency Mode for an enhanced power saving
condition.
Configuration options: [Disabled] [Enabled]
CPU Power Phase Control [Standard]
Allows you to set the power phase control of the CPU.
Configuration options: [Standard] [Optimized] [Extreme] [Manual Adjustment]
DO NOT remove the thermal module when setting this item to [Extreme] and [Manual
Adjustment]. The thermal conditions should be monitored.
The following item appears only when you set the CPU Power Phase Control to [Manual
Adjustment].
Manual Adjustment [Fast]
Allows you to set a faster phase response for the CPU to increase system
performance or to slower phase response to decrease DRAM power
efficiency.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal
conditions of every phase component.
[T. Probe]
[Extreme]
Select to maintain the VRM thermal balance.
Select to maintain the current VRM balance.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Current Capability [Auto]
DIGI+ VRM CPU Current Capability provides wider total power range for overclocking.
A higher value setting gets higher VRM power consumption delivery and extends the
overclocking frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
3-16
Chapter 3: BIOS setup
CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends the
overclocking tolerance to enlarge the O.C. potential. Use the <+> or <-> keys to adjust
the value. The values depend on the CPU installed.
DO NOT remove the thermal module. The thermal conditions should be monitored.
DRAM Current Capability [100%]
A higher value brings a wider total power range, and extends the overclocking range
simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
DRAM Voltage Frequency [Auto]
Allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM
frequency to increase the O.C. range, or a low DRAM frequency for a better system
stability.
Configuration options: [Auto] [Manual]
The following item appears only when you set set the DRAM Frequency Mode item to
[Manual].
DRAM Fixed Frequency Mode [300]
Allows you to set a fixed DRAM frequency to increase the overclocking
range or a low DRAM frequency for better system stability. Use the <+> or
<-> keys to adjust the value. The values range from 300kHz to 500kHz with
a 50kHz interval.
DRAM Power Phase Control [Auto]
[Auto]
Allows you to set the Auto mode.
[Optimized]
[Extreme]
Allows you to set the ASUS optimized phase tuning profile.
Allows you to set the full phase mode.
CPU Power Management
The subitems in this menu allow you to set the CPU ratio and their features.
Enhanced Intel SpeedStep Technology [Enabled]
Allows the operating system to dynamically adjust the processor voltage and cores
frequency, resulting to a decreased average power consumption and decreased
average heat production.
Configuration options: [Disabled] [Enabled]
Turbo Mode [Enabled]
Allows you to enable your core processor’s speed to run faster than the base operating
frequency when it is below operating power, current and temperature specification limit.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set the Turbo Mode to [Enabled].
3-17
ASUS Z87-DELUXE
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the Turbo Ratio’s time duration that exceeds the TDP
(Thermal Design Power) for maximum performance. Use the <+> or <->
keys to adjust the value. The values range from 1W t0 4096W.
Package Power Time Window [Auto]
Also known as Power Limit 1, and allows you to maintain the time window
for Turbo Ratio over TDP (Thermal Design Power). Use the <+> or <->
keys to adjust the value. The values range from 1 to 127 in seconds.
Short Duration Package Power Limit [Auto]
Also known as Power Limit 2, and allows you to provide rapid protection
when the package power exceeds the Power Limit 1. Use the <+> or <->
keys to adjust the value. The values range from 1W t0 4096W.
CPU Integrated VR Current Limit [Auto]
Allows you to set a higher current limit to prevent frequency and power
throttling when overclocking. Use the <+> or <-> keys to adjust the value.
The values range from 0.125 to 1023.875 with a 0.125 interval.
CPU Internal Power Switching Frequency
Frequency Tuning Mode [Auto]
Allows you to increase or decrease the switching frequency of the internal regulator.
Decrease to help consume less power or increase to help votlage stability. When this
item is set to [+] or [-], the Frequency Tuning Offset appears and allows you to set its
value from 0% to 6%.
CPU Internal Power Fault Control
Thermal Feedback [Auto]
Allows your system to take precautionary actions to be taken by the CPU when the
thermal conditions of the external regulator exceeds the threshold.
Configuration options: [Auto] [Disabled] [Enabled]
CPU Integrated VR Fault Management [Auto]
Disable this item to prevent tripping the Fully Integrated Voltage Regulator when doing
over-voltage. We recommend you to disable this item when overclocking.
Configuration options: [Auto] [High Performance] [Balanced]
CPU Internal Power Configuration
CPU Integrated VR Efficiency Management [Auto]
Allows you to improve power saving when the processor is in low power state. Disable
to make the Fully Integrated Voltage Regulator work in high performance at all times.
Configuration options: [Auto] [High Performance] [Balanced]
3-18
Chapter 3: BIOS setup
Power Decay Mode [Auto]
Allows your system to improve the power saving mode on the Fully Integrated Voltage
Regulator as the processor goes into low current state.
Configuration options: [Auto] [Disabled] [Enabled]
Idle Power-in Response [Auto]
Allows you to set the slew rate for the Fully Integrated Voltage Regulator as it enters
manual override mode.
Configuration options: [Auto] [Regular] [Fast]
Idle Power-out Response [Auto]
Allows you to set the slew rate for the Fully Integrated Voltage Regulator as it exits
manual override mode.
Configuration options: [Auto] [Regular] [Fast]
Power Current Slope [Auto]
Allows you to set the gradient of the high-speed active phase current balance during
load transients to eliminate current imbalance that can result from a load current
oscillating near the switching frequency.
Configuration options: [Auto] [LEVEL -4] - [LEVEL 4]
Power Current Offset [Auto]
Allows you to increase or decrease the output current sensed by the CPU. It finds the
balance between optimal regulating while staying below the current threshold.
Configuration options: [Auto] [100%] [87.5%] [75.0%] [62.5%] [50.0%] [37.5%] [25.0%]
[12.5%] [0%] [-12.5%] [-25.0%] [-37.5%] [-50.0%] [-62.5%] [-75.0%] [-87.5%] [-100%]
Power Fast Ramp Response [Auto]
Allows you to increase to enhance the response of the voltage regulator during the
load transient.
Configuration options: [Auto] [0.00] - [1.50]
CPU Internal Power Saving Control
Power Saving Level 1 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0A to 80A at 1Amp increment.
Power Saving Level 2 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0A to 50A at 1Amp increment.
Power Saving Level 3 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0A to 30A at 1Amp increment.
3-19
ASUS Z87-DELUXE
Extreme OV [Disabled]
Disable this item to help protect the CPU from being burned by Over Voltage. When you
enable this item, you can choose a high level voltage to overclock, but will not guarantee the
CPU life.
Configuration options: [Enabled] [Disabled]
Fully Manual Mode [Disabled]
Allows you to enable the fixed CPU integrated voltages.
Configuration options: [Enabled] [Disabled]
These items appear only when you set the Fully Manual Mode and Exreme OV to
[Enabled].
Max Vcore [Disabled]
Enable this item to make the CPU Core Voltage as close to CPU Input Voltage as
possible.
Enabling this item will set the Core Voltage in a very high voltage setting!
Max Cache Voltage [Disabled]
Enable this item to make the CPU Cache Voltage as close to CPU Input Voltage as
possible.
Enabling this item will set the Ring Voltage in a very high voltage setting!
CPU Core Voltage [Auto]
Allows you to configure the voltage amount for the processor’s cores. Increase the voltage
when setting a high Core Frequency value.
Configuration options: [Auto] [Manual Mode] [Offset Mode]
The following item appears only when you set the CPU Core Voltage to [Manual].
CPU Core Voltage Override [Auto]
Allows you to set the CPU Core Voltage override. Use the <+> or <-> keys to adjust the
value, The values range from 0.001V to 1.920V with a 0.001V interval.
The following items appear only when you set the CPU Core Voltage to [Offset Mode].
Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Core Voltage Offset
Use the <+> or <-> keys to adjust the value. The values range from 0.001V
to 0.999V with a 0.001V interval.
3-20
Chapter 3: BIOS setup
CPU Cache Voltage [Auto]
Allows you to configure the amount of voltage fed to the uncore of the processor including its
cache. Increase the voltage when increasing Ring frequency.
Configuration options: [Auto] [Manual Mode] [Offset Mode]
The following item appears only when you set the CPU Cache Voltage to [Manual Mode].
CPU Cache Voltage Override [Auto]
Allows you to set the CPU Cache Voltage override. By default, this item takes the
standard value of the installed CPU. You can use the <+> or <-> keys to adjust the
value. The values range from 0.001V to 1.920V with a 0.001V interval.
The following items appear only when you set the CPU Core Voltage to [Offset Mode].
Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Cache Voltage Offset
Allows you to set the CPU cache voltage offset. By default, this item takes the standard
value of the installed CPU. You can use the <+> or <-> keys to adjust the value. The
values range from 0.001V to 0.999V with a 0.001V interval.
CPU Graphics Voltage [Auto]
Allows you to configure the voltage amount for the integrated graphics processing unit
(iGPU). Increase the voltage when setting a high iGPU frequency value.
Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode]
The following item appears only when you set the CPU Core Voltage to [Manual].
CPU Graphics Voltage Override [Auto]
Allows you to set the CPU Graphics Voltage override. By default, this item takes the
standard value of the installed CPU. You can use the <+> or <-> keys to adjust the
value. The values range from 0.001V to 1.920V with a 0.001V interval.
The following items appear only when you set the CPU Core Voltage to [Offset Mode].
Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Graphics Voltage Offset
By default, this item takes the standard value of the installed CPU. You can
use the <+> or <-> keys to adjust the value. The values range from 0.001V
to 0.999V with a 0.001V interval.
3-21
ASUS Z87-DELUXE
The following item appears only when you set the CPU Core Voltage to [Adaptive Mode].
Additional Turbo Mode CPU Graphics Voltage [Auto]
This item allows you to increase the voltage for Turbo Mode CPU Graphics.
By default, this item takes the standard value of the installed CPU. You can
use the <+> or <-> keys to adjust the value. The values range from 0.001V
to 1.920V with a 0.001V interval.
Total Adaptive Mode CPU Graphics Voltage [Auto]
This item sums up the voltages of the CPU Graphics Voltage offset and
Additional Turbo Mode CPU Graphics Voltage options.
CPU System Agent Voltage Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU System Agent Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the system agent of the processor
including its PCIe controller and power control unit. Increase the voltage when
increasing DRAM frequency.
You can use the <+> or <-> keys to adjust the value. The values range from 0.001V to
0.999V with a 0.001V interval.
CPU Analog I/O Voltage Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Analog I/O Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the analog portion of the I/O on
the processor. By default, this item takes the standard value of the installed CPU.
Increase the amount of voltage when increasing DRAM frequency.
You can use the <+> or <-> keys to adjust the value. The values range from 0.001V to
0.999V with a 0.001V interval.
CPU Digital I/O Voltage Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU Digital I/O Voltage Offset [Auto]
Allows you to configure the amount of voltage fed to the digital portion of the I/O on the
processor. By default, this item takes the standard value of the installed CPU. Increase
the amount of voltage when increasing DRAM frequency.
You can use the <+> or <-> keys to adjust the value. The values range from 0.001V to
0.999V with a 0.001V interval.
3-22
Chapter 3: BIOS setup
SVID Support [Auto]
When overclocking, set this item to [Enabled]. Disabling this item would stop the processor
from communicating with the external voltage regulator.
Configuration options: [Auto] [Disabled] [Enabled]
The following item appears only when you set SVID Support to [Enabled].
SVID Voltage Override [Auto]
Allows you to set the SVID Voltage override. By default, this item takes the standard
value of the installed CPU. You can use the <+> or <-> keys to adjust the value. The
values range from 0.001V to 2.440V with a 0.001V interval.
CPU Input Voltage [Auto]
Allows you to set an input voltage for the processor by the external voltage regulator. By
default, this item takes the standard value of the installed CPU. You can use the <+> or <->
keys to adjust the value. The values range from 0.800V to 3.040V with a 0.010V interval.
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. You can use the <+> or <-> keys to adjust the value.
The values range from 1.20V to 1.92V with a 0.005V interval.
According to Intel® CPU specifications, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend that you install the DIMMs with the voltage
requirement below 1.65V.
PCH VLX Voltage [Auto]
Allows you to set the I/O voltage on the PCH (Platform Controller Hub). You can use the <+>
or <-> keys to adjust the value. The values range from 1.2000V to 2.0000V with a 0.0125V
interval.
PCH Voltage [Auto]
Allows you to set the Core voltage for the PCH (Platform Controller Hub). You can use the
<+> or <-> keys to adjust the value. The values range from 0.80V to 1.70V with a 0.01V
interval.
•
The values of the CPU PLL Voltage, CPU Manual Voltage, CPU Offset Voltage,
iGPU Manual Voltage, iGPU Offset Voltage, DRAM Voltage, VCCSA Voltage, VCCIO
Voltage, and PCH Voltage items are labeled in different color, indicating the risk levels
of high voltage settings.
•
The system may need better cooling system for a more stable performance under high
voltage settings.
VTTDDR Voltage [Auto]
Allows you to set the termination voltage for the system memory. You can use the <+> or <->
keys to adjust the value. The values range from 0.6000V to 1.0000V with a 0.0125V interval.
3-23
ASUS Z87-DELUXE
DRAM CTRL REF Voltage [Auto]
This item is the DRAM reference voltage for the control lines from the memory bus. You can
use the <+> or <-> keys to adjust the value. The values range from 0.3950x to 0.6300x with a
0.0050x interval.
DRAM DATA REF Voltage on CHA/CHB [Auto]
This item is the DRAM reference voltage for the data lines on Channels A and B. You can
use the <+> or <-> keys to adjust the value. The values range from 0.395x to 0.630x with a
0.005x interval.
Clock Crossing VBoot [Auto]
Allows you to increase the value of the clock crossing voltage boot when the rising edge of
the BCLK DN is equal to the falling edge of the BCLK DP. You can use the <+> or <-> keys to
adjust the value. The values range from 0.1V to 1.9V with a 0.00625V interval.
Clock Crossing Reset Voltage [Auto]
Allows you to increase the value of the clock crossing reset voltage when the rising edge of
the BCLK DN is equal to the falling edge of the BCLK DP. You can use the <+> or <-> keys to
adjust the value. The values range from 0.1V to 1.9V with a 0.00625V interval.
Clock Crossing Voltage [Auto]
Allows you to increase the value of the clock crossing voltage when the rising edge of the
BCLK DN is equal to the falling edge of the BCLK DP. You can use the <+> or <-> keys to
adjust the value. The values range from 0.1V to 1.9V with a 0.00625V interval.
PLL Termination Voltage [Auto]
Allows you to terminate the PLL Voltage. You can use the <+> or <-> keys to adjust the value.
The values range from 0.00000V to 2.50000V with a 0.01250V interval.
CPU Spread Spectrum [Auto]
[Auto]
Automatic configuration.
[Disabled]
[Enabled]
Enhances the BCLK overclocking ability.
Sets to [Enabled] for EMI control.
3-24
Chapter 3: BIOS setup
3.6.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items in this menu may vary based on the CPU installed.
Intel Adaptive Thermal Monitor [Enabled]
[Enabled]
[Disabled]
Enables the overheated CPU to throttle its clock speed to cool down.
Disables the CPU thermal monitor function.
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2] [3]
Limit CPUID Maximum [Disabled]
When set to [Enabled], this item allows the legacy OS to boot even without support for CPUs
with extended CPUID functions.
Configuration options: [Enabled] [Disabled]
Execute Disable Bit [Enabled]
Execute Disable prevents certain classes of malicious buffer overflow attacks when combined
with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3).
Configuration options: [Disabled] [Enabled]
3-26
Chapter 3: BIOS setup
Intel Virtualization Technology [Disabled]
When set to [Enabled], a VMM can utilize the additional hardware capabilities provided by
Vanderpool Technology.
Configuration options: [Disabled] [Enabled]
Hardware Prefetcher [Enabled]
Allows you to enable or disable the Mid Level Cache (L2) streamer prefetcher.
Configuration options: [Disabled] [Enabled]
Adjacent Cache Line Prefetch [Enabled]
Allows you to enable or disable the Mid Level Cache (L2) prefetching of adjacent cache lines.
Configuration options: [Disabled] [Enabled]
Boot Performance Mode [Max on-Tu...]
Allows you to select the performance state that the BIOS will set before OS handoff.
Configuration options: [Max Non-Turbo Performance] [Max Battery] [Turbo Performance]
Dynamic Storage Accelerator [Disabled]
Allows you to enable or disable Dynamic Storage Accelerator for C state configuration.
Configuration options: [Enabled] [Disabled]
CPU Power Management Configuration
This item allows you to manage and configure the CPU’s power.
Enhanced Intel SpeedStep Technology [Enabled]
Allows your system to adjust the processor’s voltage and cores frequency, resulting in
decreased power consumption and heat production.
[Disabled]
[Enabled]
The CPU runs at its default speed.
The system controls the CPU speed.
Turbo Mode [Enabled]
Allows you to automatically set the processor cores to run faster than the base
frequency when operating below power, current and temperature specification limit.
Configuration options: [Enabled] [Disabled]
CPU C States
Allows you to enable or disable the CPU C states.
Configuration options: [Auto] [Enabled] [Disabled]
The following items appear only when you set the CPU C States to [Enabled].
Enhanced C1 state [Enabled]
Allows your processor to reduce power when the system is in idle mode.
Configuration options: [Enabled] [Disabled]
CPU C3 Report [Enabled]
Allows you to disable or enable the CPU C3 report to the operating system.
Configuration options: [Enabled] [Disabled]
3-27
ASUS Z87-DELUXE
|
