P8H77-I
Contents
iii
Contents
iv
Contents
v
Safety information
Electrical safety
•
To prevent electric shock hazard, disconnect the power cable from the electric outlet
before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
•
•
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, ensure that all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
•
•
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
vi
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports.
•
Chapter 2: BIOS information
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
vii
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Italics
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1>+<Key2>+<Key3>
If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
Example: <Ctrl>+<Alt>+<D>
viii
P8H77-I specifications summary
CPU
LGA1155 Socket for Intel® 3rd/2nd Generation Core™ i7 / i5 / i3 /
Pentium® / Celeron® Processors
Supports Intel® Turbo Boost Technology 2.0*
*The Turbo Boost Technology 2.0 support depends on the CPU types.
Chipset
Memory
Intel® H77 Express Chipset
2 x U-DIMM, maximum 16GB*, DDR3 2200(O.C.)/2133(O.C.)/2200(O.
C.)/2000(O.C.)/1866(O.C.)/1800(O.C.)/1600/1333/1066 MHz, non-
ECC, un-buffered memory
Dual-channel memory architecture
*
DDR3 1600 MHz and above memory frequency is supported by
Intel® 3rd generation processors.
** The maximum 16GB memory capacity can be supported with
8GB or above DIMMs. ASUS will update the memory QVL
once the DIMMs are available in the market.
Vendors List).
****When you install a total memory of 4GB capacity or more,
Windows® 32-bit operating system may only recognize less than
3GB. We recommend a maximum of 3GB system memory if you are
using a Windows® 32-bit operating system.
Expansion slots 1 x PCI Express 3.0/2.0 x16 slot
This motherboard is ready to support PCIe 3.0 SPEC. Functions will
*
be available when using PCIe 3.0-compliant devices. Please refer
Graphics
Storage
Supports HDMI with max. resolution up to 1920 x 1200 @60Hz
Supports DVI with max. resolution up to 1920 x 1200 @60Hz
Supports D-Sub with max. resolution up to 2048 x 1536 @75Hz
Intel® H77 Express Chipset:
-
-
2 x Serial ATA 6.0 Gb/s connectors (gray)
4 x Serial ATA 3.0 Gb/s connectors (blue)
-
Support RAID 0, 1, 5, 10 Mode
Realtek® RTL8111F Gigabit LAN controller
LAN
Audio
VIA® 8-channel High Definition Audio CODEC
-
Supports Multi-Streaming, and Front Panel Jack-Retasking
USB
4 x USB 3.0 ports (2 ports at mid-board, 2 ports at back panel)
8 x USB 2.0/1.1 ports (2 ports at mid-board, 6 ports at back panel)
Back Panel I/O
Ports
1 x PS/2 Keyboard/Mouse port
1 x HDMI Output port
1 x DVI-D Output port
1 x D-SUB Output port
1 x LAN (RJ45) port
2 x USB 3.0 ports
6 x USB 2.0/1.1 ports
1 x Optical S/PDIF Out
3 x Audio jack(s)
(continued on the next page)
ix
P8H77-I specifications summary
Internal I/O Connector 1 x USB 2.0 connectors support additional 2 USB 2.0 ports
1 x USB 3.0 connectors support additional 2 USB 3.0 ports
2 x SATA 6Gb/s connectors
4 x SATA 3Gb/s connectors
1 x 4pin CPU Fan connector
1 x 4pin Chassis Fan connector
1 x Front Panel Audio connector
1 x System Panel connector
1 x 24-pin ATX Power connector
1 x 4-pin ATX 12V Power connector
1 x S/PDIF Out connector
1 x Clear CMOS jumper(s)
1 x Speaker header
BIOS
64 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS
2.5, ACPI 2.0a
Manageability
Accessories
WOL by PME, PXE
2 x Serial ATA 6.0Gb/s cables
1 x I/O Shield
1 x User’s manual
1 x Support DVD
Support DVD
Form Factor
Drivers
ASUS Utilities
ASUS Update
Anti-virus software (OEM version)
Mini-ITX Form Factor, 6.7”x 6.7” (17.0cm x 17.0cm)
* Specifications are subject to change without notice.
x
Chapter 1
Product introduction
1.1
Welcome!
Thank you for buying an ASUS® P8H77-I motherboard!
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the items in
your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
Motherboard
Cables
ASUS P8H77-I motherboard
2 x Serial ATA 6.0Gb/s cables
1 x I/O shield
Accessories
Application DVD
Documentation
ASUS motherboard support DVD
User Manual
If any of the above items is damaged or missing, contact your retailer.
1.3
Special features
1.3.1
Product highlights
Intel® LGA1155 Intel® Third / Second Generation Core™ i7 / i5
/ i3 / Pentium® / Celeron® Processors
This motherboard supports the Intel® 3rd / 2nd generation Core™ i7 / i5
/ i3 / Pentium® / Celeron® Processors in LGA1155 package with iGPU,
memory and PCI Express controllers integrated to support 2-channel (2
DIMMs) DDR3 memory, and 16 PCI Express 3.0/2.0 lanes. This provides
great graphics performance. Intel® 3rd / 2nd Core™ i7 / i5 / i3 / Pentium®
/ Celeron® processors are among the most powerful and energy efficient
CPUs in the world.
1-1
ASUS P8H77-I
Intel® H77 Express Chipset
The Intel® H77 Express Chipset is a single-chipset designed to support
the 1155 socket Intel® 3rd / 2nd generation Core™ i7 / i5 / i3 / Pentium®
/ Celeron® processors. It provides improved performance by utilizing
serial point-to-point links, allowing increased bandwidth and stability.
Additionally, H77 chipset provides 4 USB 3.0 ports for 10 times faster
data retrieval speed. Moreover, Intel® H77 Express Chipset can also
enable iGPU function, letting users enjoy the latest Intel® integrated
graphic performance.
Dual-Channel DDR3 2200(O.C.)* /2133(O.C.)* /2000(O.C.)*
/1866(O.C.)* /1800(O.C.)* /1600 / 1333 / 1066MHz support
The motherboard supports DDR3 memory that features data transfer
rates of 2200(O.C.)* /2133(O.C.)* /2000(O.C.)* /1866(O.C.)* /1800(O.
C.)* /1600 / 1333 / 1066 MHz to meet the higher bandwidth requirements
of the latest 3D graphics, multimedia, and Internet applications. The
dual-channel DDR3 architecture enlarges the bandwidth of your system
memory to boost system performance.
Native SATA 6.0 Gb/s support
The Intel® H77 Express Chipset natively supports next-generation Serial
ATA (SATA) storage interface. This motherboard delivers up to 6.0 Gb/s
data transfer rates. Additionally, get enhanced scalability, faster data
retrieval, double the bandwidth of current bus systems.
Complete USB 3.0 Integration
ASUS facilitates strategic USB 3.0 accessibility for both the front and
rear panel – 4 USB 3.0 ports in total. Experience the latest plug &
play connectivity at speeds up to 10 times faster than USB 2.0. This
motherboard affords greater convenience to high speed connectivity.
PCIe 3.0 Ready
PCI Express® 3.0 (PCIe 3.0) is the latest PCI Express bus standard with
improved encoding schemes that provide twice the performance of the
current PCIe 2.0. The total bandwidth for a x16 link reaches a maximum
of 32Gb/s, double the 16 Gb/s of PCIe 2.0 (in x16 mode). As such, PCIe
3.0 provides userss an unprecendented data speeds, combined with the
convenience and seamless transition offerred by complete backward
compatibility with PCIe 1.0 and PCIe 2.0 devices. PCIe 3.0 will become
a must-have feature for users who wish to improve and optimize graphic
performance, as well as have the latest technology available to them.
* PCI 3.0 speed is supported by Intel® 3rd generation CoreTM processors.
1-2
Chapter 1: Product introduction
HDMI Support
Enjoy Full HD 1080p Multimedia Home-Theater Entertainment
High Definition Multimedia Surface (HDMI) is a set of digital video
standards that delivers mulit-channel audio and uncompressed digital
video for full HD 1080p visuals through a single cable. Supporting HDCP
copy protection such as HD DVD and blu-ray discs, HDMI provides you
with the highest quality home theater experience.
Intel® Smart Response Technology
SSD Speed with HDD Capacity
Intel® Smart Response Technology boosts overall system performance.
It uses an installed fast SSD (min 18.6GB available capacity required) as
a cache for frequently accessed data. Key benefits include reduced load
and wait times, and lower power consumption through the elimination
of unnecessary hard drive spin. This technology combines SSD
performance with hard drive capacity, operating up to 4X faster than a
hard drive-only system, and an important part of Green ASUS eco-
friendly computing.
1.3.2
Innovative ASUS features
ASUS UEFI BIOS
The new ASUS UEFI BIOS is an Unified Extensible Firmware Interface
that offers a user-friendly interface that goes beyond traditional keyboard-
only BIOS controls to enable more flexible and convenient mouse input.
Users can easily navigate the new UEFI BIOS with the same smoothness
as their operating system. It natively supports hard drives larger than
2.2TB in 64-bit, with full storage space utilization, helping deliver far more
exciting computing than traditional BIOS versions.
The exclusive EZ Mode displays frequently-accessed setup info, while
the Advanced Mode is for experienced performance enthusiasts that
demand far more intricate system settings.
ASUS MyLogo2™
This feature allows you to convert your favorite photo into a 256-color
boot logo for a more colorful and vivid image on your screen.
ASUS CrashFree BIOS 3
ASUS CrashFree BIOS 3 is an auto-recovery tool that allows you to
restore a corrupted BIOS file using the bundled support DVD or USB
flash disk that contains the latest BIOS file.
ASUS EZ Flash 2
ASUS EZ Flash 2 is a utility that allows you to update the BIOS without
using an OS-based utility.
1-3
ASUS P8H77-I
USB 3.0 Boost
Faster USB 3.0 Transmission with UASP
New ASUS USB 3.0 Boost technology supports UASP (USB Attached
SCSI Protocol), the latest USB 3.0 standard. With USB 3.0 Boost
technology, a USB device’s transmission speed is significantly increased
up to 170%, adding to an already impressive fast USB 3.0 transfer speed.
ASUS software automatically accelerates data speeds for compatible
USB 3.0 peripherals without the need for any user interaction.
GPU Boost
Go to the Limit with iGPU Level Up!
GPU Boost accelerates the integrated GPU for extreme graphics
performance. The user-friendly interface facilitates flexible frequency
adjustments. It easily delivers stable system-level upgrades for every use.
ASUS Q-Fan 2
ASUS Q-Fn 2 technology intelligently and automatically adjusts CPU fan
speed according to system load and temperature, enabling users to work
in distraction-free environment with minimal noise.
ASUS Fan Xpert
ASUS Fan Xpert intelligently allows you to adjust the CPU and chassis
fan speeds according to different ambient temperatures caused by
different climate conditions in different geographic regions and your PC’s
loading. The built-in variety of useful profiles offer flexible controls of fan
speed to achieve a quiet and cool environment.
AI Suite II
One-stop Access to Innovative ASUS Features
With its user-friendly interface, ASUS AI Suite II consolidates all the
exclusive ASUS features into one simple to use software package. It
allows you to supervise overclocking, energy management, fan speed
control, and voltage and sensor readings. This all-in-one software offers
diverse and ease to use functions, with no need to switch back and forth
between different utilities.
ASUS Anti-Surge Protection
This special design prevents expensive devices and the motherboard
from damage caused by power surges from switching power supply
(PSU).
1-4
Chapter 1: Product introduction
LucidLogix® Virtu MVP™
LucidLogix® Virtu MVP featuring HyperFormance™ Technology boosts
your discrete graphics card up to 60% beyond its original performance.
Designed for Intel® processor graphics and Windows® 7 PCs, it perfectly
combines the performance of discrete graphics cards with fast computing
iGPU. Also with the newly designed Virtual Sync, users can enjoy a
smoother gaming experience by eliminating tearing artifacts. LucidLogix®
Virtu MVP could also dynamically assign tasks to the best available
graphics resource, based on power, performance and system load. This
allows users to fully utilize 3x faster video conversion with Intel® Quick
Sync Video 2.0 technology while retaining high-end 3D rendering and
gaming performance, provided by both NVIDIA® and AMD graphic cards.
When the discrete graphics card is not required, power consumption
goes automatically down to near zero, making the system more
environmentally-friendly. For users searching for perfection, LucidLogix
Virtu MVP provides great graphical performance and the best flexibility
and efficiency.
*LucidLogix® Virtu Universal MVP™ supports Windows® 7 operating system.
**Intel® Quick Sync Video feature is supported by 3rd/2nd generation Intel®
Core
™
processor family.
C.P.R. (CPU Parameter Recall)
The BIOS C.P.R. feature automatically restores the CPU default settings
when the system hangs due to overclocking failure. C.P.R. eliminates the
need to open the system chassis and clear the RTC data. Simply shut
down and reboot the system, and the BIOS automatically restores the
CPU parameters to their default settings.
ErP ready
The motherboard is European Union´s Energy-related Products (ErP)
ready, and ErP requires products to meet certain energy efficiency
requirements in regards to energy consumptions. This is in line with
ASUS vision of creating environment-friendly and energy-efficient
products through product design and innovation to reduce carbon
footprint of the product and thus mitigate environmental impacts.
1-5
ASUS P8H77-I
1.4
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
•
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due to
static electricity.
•
•
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so may
cause severe damage to the motherboard, peripherals, or components.
Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down
the system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
SB_PWR
I
P
ON
OFF
Standby Power Powered Off
P8H77-I Onboard LED
1-6
Chapter 1: Product introduction
1.5
Motherboard overview
Before you install the motherboard, study the configuration of your chassis to ensure that the
motherboard fits into it.
Ensure that you unplug the power cord before installing or removing the motherboard.
Failure to do so can cause you physical injury and damage motherboard components.
1.5.1
Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
1.5.2
Screw holes
Place four screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
I
P 8 H 7
1-7
ASUS P8H77-I
1.5.3
Motherboard layout
1
7
1
2
3
4
5
8
6
17cm(6.7in)
SATA6G_1
SATA6G_2
CHA_FAN
KBMS_USB56
Intel®
H77
SATA3G_1
SATA3G_2
SATA3G_3
SATA3G_4
Super
I/O
CPU_FAN
HDMI
SPDIFO
ASM
1442
64Mb
BIOS
ATX12V
USB3_12
USB34
- I
7
P 8 H
4
LAN_USB12
AUDIO
RTL
8111F
9
10
AAFP
SPDIF_OUT
VIA
VT1708S
PCIEX16
SB_PWR
14 13
12 11
1.5.4
Layout contents
Connectors/Jumpers/Slots/LED
Page
Connectors/Jumpers/Slots/LED
Page
1.
CPU, chassis fan connectors (4-pin CPU_FAN,
4-pin CHA_FAN)
1-27 8.
DDR3 DIMM slots
1-14
2.
3.
4.
USB connectors (10-1 pin USB78)
1-31
9
Speaker connector (4-pin SPEAKER)
1-28
1-28
1-28
USB 3.0 connector (20-1 pin USB3_34)
1-30 10. System panel connector (10-1 pin PANEL)
ATX power connectors (24-pin EATXPWR,
4-pin EATX12V)
1-27 11. Clear RTC RAM (3-pin CLRTC)
5.
6.
Intel® LGA1155 CPU socket
1-9
12. Onboard LED (SB_PWR)
1-6
Intel® H77 Serial ATA 6.0Gb/s connectors
1-30 13. Digital audio connector (4-1 pin SPDIF_OUT) 1-26
(7-pin SATA6G_1/2 [gray])
7.
Intel® H77 Serial ATA 3.0Gb/s connectors (7-pin
1-29 14. Front panel audio connector (10-1 pin AAFP) 1-26
SATA3G_1~4 [blue])
1-8
Chapter 1: Product introduction
1.6
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1155 socket designed for the Intel® 3rd /
2nd Generation Core™ i7 / i5 / i3 / Pentium® / Celeron® Processors.
Unplug all power cables before installing the CPU.
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the
socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing,
or if you see any damage to the PnP cap/socket contacts/motherboard components.
ASUS will shoulder the cost of repair only if the damage is shipment/transit-related.
•
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1155 socket.
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
1.6.1
Installing the CPU
To install a CPU:
1.
Locate the CPU socket on the motherboard.
I
P
P8H77-I CPU socket LGA1155
2.
Press the load lever with your thumb (A),
and then move it to the right (B) until it is
released from the retention tab.
Load lever
To prevent damage to the socket pins,
do not remove the PnP cap unless
you are installing a CPU.
A
B
Retention tab
1-9
ASUS P8H77-I
3.
Lift the load lever in the direction of the
arrow until the load plate is completely
lifted.
Load plate
4.
Position the CPU over the socket,
ensuring that the gold triangle is on the
bottom-left corner of the socket, and
then fit the socket alignment keys into
the CPU notches.
CPU notches
The CPU fits in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending
the connectors on the socket and
damaging the CPU!
Gold
triangle
mark
Alignment keys
5.
Close the load plate (A), and then push
down the load lever (C), ensuring that
the front edge of the load plate slides
under the retention knob (B).
C
A
B
1-10
Chapter 1: Product introduction
6.
Insert the load lever under the
retention tab.
PnP cap
When you insert the
load lever under the
retention tab, the PnP cap
disengages from the load
plate.
7.
Apply some Thermal Interface Material
to the exposed area of the CPU that the
heatsink will be in contact with, ensuring
that it is spread in an even thin layer.
Some heatsinks come with pre-
applied thermal paste. If so, skip this
step.
The Thermal Interface Material is
toxic and inedible. DO NOT eat it. If
it gets into your eyes or touches your
skin, wash it off immediately, and seek
professional medical help.
1-11
ASUS P8H77-I
1.6.2
Installing the CPU heatsink and fan
The Intel® LGA1155 processor requires a specially designed heatsink and fan assembly to
ensure optimum thermal condition and performance.
•
When you buy a boxed Intel® processor, the package includes the CPU fan and
heatsink assembly. If you buy a CPU separately, ensure that you use only Intel®-certified
multi-directional heatsink and fan.
•
•
Your Intel® LGA1155 heatsink and fan assembly comes in a push-pin design and
requires no tool to install.
Use an LGA1155-compatible CPU heatsink and fan assembly only. The LGA1155 socket
is incompatible with the LGA775 and LGA1366 sockets in size and dimension.
If you purchased a separate CPU heatsink and fan assembly, ensure that you have
properly applied Thermal Interface Material to the CPU heatsink or CPU before you install
the heatsink and fan assembly.
Ensure that you have installed the motherboard to the chassis before you install the CPU
fan and heatsink assembly.
To install the CPU heatsink and fan:
A
1.
Place the heatsink on top of the installed
CPU, ensuring that the four fasteners match
the holes on the motherboard.
B
B
A
Orient the heatsink and fan assembly
such that the CPU fan cable is closest to
the CPU fan connector.
2.
Push down two fasteners at a time in a
diagonal sequence to secure the heatsink
and fan assembly in place.
1
1
A
B
B
A
The type of CPU heatsink and fan assembly may differ, but the installation steps and
functions should remain the same. The illustration above is for reference only.
1-12
Chapter 1: Product introduction
3.
Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.
CPU_FAN
CPU FAN PWM
CPU FAN IN
I
CPU FAN PWR
7
GND
P
P8H77-I CPU fan connector
Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if
you fail to plug this connector.
1.6.3
Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan:
1.
2.
3.
Disconnect the CPU fan cable from the connector on the motherboard.
Rotate each fastener counterclockwise.
Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and
fan assembly from the motherboard.
A
A
B
B
A
B
B
A
1-13
ASUS P8H77-I
4.
5.
Carefully remove the heatsink and fan
assembly from the motherboard.
Rotate each fastener clockwise to ensure
correct orientation when reinstalling.
1.7
System memory
1.7.1
Overview
The motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) sockets.
A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched
differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for
better performance with less power consumption.
The figure illustrates the location of the DDR3 DIMM sockets:
Channel
Sockets
Channel A
Channel B
DIMM_A1
DIMM_B1
I
-
P
P8H77-I 240-pin DDR3 DIMM sockets
1-14
Chapter 1: Product introduction
1.7.2
Memory configurations
You may install 1GB, 2GB, 4GB and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM
sockets.
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
•
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
•
Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS.
- Install a 64-bit Windows® OS when you want to install 4GB or more on the
motherboard.
•
•
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.
The maximum 32GB memory capacity can be supported with 8GB or above DIMMs.
ASUS will update the memory QVL once the DIMMs are available in the market.
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency
adjustment.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (2 DIMMs) or overclocking condition.
P8H77-I Motherboard Qualified Vendors Lists (QVL)
DDR3-2400 MHz capability
DIMM socket support
(Optional)
Chip Chip
Brand NO.
Vendors
Part No.
CMGTX8(XMP)
Size
SS/DS
Timing
Voltage
1 DIMM
2 DIMMs
CORSAIR
G.SKILL
8GB (2GBx 4)
SS
-
-
-
-
10-12-10-27 1.65V
•
•
•
•
F3-19200CL11Q-
16GBZHD(XMP1.3)
16GB (4GB x4) DS
11-11-11-31 1.65V
G.SKILL
GEIL
F3-19200CL9D-4GBPIS(XMP) 4GB (2x 2GB)
GET34GB2400C9DC(XMP) 2GB
DS
DS
SS
-
-
-
-
-
-
9-11-9-28
9-11-9-27
1.65V
1.65V
•
•
•
•
•
•
KINGMAX FLLE88F-C8KKAA HAIS(XMP) 2GB
10-11-10-30 1.8V
TX2400KLU-
4GK(427652)(XMP)
Transcend
Transcend
4GB (2 x 2GB) SS
-
-
-
-
-
1.65V
1.65V
•
•
•
•
TX2400KLU-4GK
(381850)(XMP)
4GB (2x 2GB)
SS
9
TX2400KLU-
4GK(374243)(XMP)
Transcend
PATRIOT
4GB (2x 2GB)
4GB (2x 2GB)
DS
DS
-
-
-
-
9
1.65V
1.65V
•
•
•
•
PVV34G2400C9K(XMP)
9-11-9-27
DDR3-2250 MHz capability
DIMM socket support
(Optional)
Chip Chip
Brand NO.
Vendors
Part No.
Size
SS/DS
Timing
Voltage
1 DIMM
2 DIMMs
Kingston
KHX2250C9D3T1K2/4GX(XMP)
4GB (2x 2GB)
DS
-
-
9-11-9-27
1.65V
•
•
1-15
ASUS P8H77-I
DDR3-2200 MHz capability
DIMM socket
support (Optional)
SS/
DS
Chip
Brand
Chip
NO.
Vendors
Part No.
Size
Timing
Voltage
1 DIMM 2 DIMMs
GEIL
GEIL
GET34GB2200C9DC(XMP)
GET38GB2200C9ADC(XMP)
2GB
4GB
2GB
DS
-
-
-
-
-
-
-
-
-
-
9-10-9-28 1.65V
•
•
•
•
•
•
•
•
•
•
DS
DS
9-11-9-28 1.65V
KINGMAX FLKE85F-B8KJAA-FEIS(XMP)
KINGMAX FLKE85F-B8KHA EEIH(XMP)
KINGMAX FLKE85F-B8KJA FEIH(XMP)
-
-
-
-
4GB(2 x 2GB) DS
1.5V-1.7V
1.5V-1.7V
4GB(2 x 2GB) DS
DDR3-2133 MHz capability
DIMM socket support
(Optional)
SS/ Chip Chip
DS Brand NO.
Vendors
Part No.
Size
Timing
Voltage
1 DIMM
2 DIMMs
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
G.SKILL
GEIL
AX3U2133GC2G9B-DG2(XMP)
CMT16GX3M4X2133C9(XMP 1.3)
CMT4GX3M2A2133C9(XMP)
CMT4GX3M2B2133C9(XMP)
CMT8GX3M2B2133C9(XMP)
F3-17000CL9Q-16GBZH(XMP1.3)
GE34GB2133C9DC(XMP)
2GB
SS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-11-9-27
1.55~1.75V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
16GB (4GB x4) DS
9-11-10-27 1.50V
4GB(2x 2GB)
4GB(2x 2GB)
8GB (4GB x 2)
DS
DS
DS
9-10-9-24
9-10-9-27
9-11-9-27
1.65V
1.50V
1.50V
16GB (4GB x 4) DS
9-11-10-28 1.65V
2GB
DS
DS
9-9-9-28
9-9-9-28
-
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
GEIL
GU34GB2133C9DC(XMP)
4GB(2 x 2GB)
KINGSTON KHX2133C9AD3T1K2/4GX(XMP)
KINGSTON KHX2133C9AD3X2K2/4GX(XMP)
KINGSTON KHX2133C9AD3T1K4/8GX(XMP)
4GB ( 2x 2GB ) DS
4GB(2 x 2GB)
8GB(4 x 2GB)
DS
DS
DS
9-11-9-27
9-11-9-27
-
KINGSTON KHX2133C9AD3T1FK4/8GX(XMP) 8GB(4x 2GB)
DDR3-2000 MHz capability
DIMM socket
support (Optional)
SS/
DS Brand
Chip
Vendors
Apacer
Part No.
Size
Chip NO.
Timing
Voltage
1 DIMM 2 DIMMs
78.AAGD5.9KD(XMP)
6GB(3 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3x 2GB)
4GB(2 x 2GB)
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-27
1.65V
•
•
•
•
•
•
•
CORSAIR
CORSAIR
G.SKILL
CMZ4GX3M2A2000C10(XMP)
CMT6GX3M3A2000C8(XMP)
F3-16000CL9D-4GBFLS(XMP)
F3-16000CL9D-4GBTD(XMP)
F3-16000CL6T-6GBPIS(XMP)
GUP34GB2000C9DC(XMP)
SS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
10-10-10-27 1.50V
•
•
•
•
•
8-9-8-24
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.65V
1.6V
9-9-9-24
G.SKILL
9-9-9-27
G.SKILL
6-9-6-24
GEIL
9-9-9-28
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
Transcend
KHX2000C9AD3T1K2/4GX(XMP) 4GB( 2x 2GB)
KHX2000C9AD3W1K2/4GX(XMP) 4GB ( 2x 2GB)
KHX2000C9AD3T1K2/4GX(XMP) 4GB(2 x 2GB)
KHX2000C9AD3W1K3/6GX(XMP) 6GB( 3x 2GB)
KHX2000C9AD3T1K3/6GX(XMP) 6GB(3x 2GB)
-
•
•
•
•
•
•
•
•
•
•
•
•
-
9
-
-
TX2000KLN-8GK(XMP)
8GB(2 x 4GB)
-
H5TQ2G8
3BFR H9C
Asint
SLA302G08-ML2HB(XMP)
4GB
DS
HYNIX
-
-
•
DDR3-1866 MHz capability
DIMM socket support
(Optional)
SS/ Chip Chip
DS Brand NO.
Vendors
Part No.
Size
Timing
Voltage
1 DIMM
2 DIMMs
A-DATA
AX3U1866PB2G8-DP2(XMP)
CMT4GX3M2A1866C9(XMP)
CMT6GX3MA1866C9(XMP)
CMZ8GX3M2A1866C9(XMP)
F3-14900CL9Q-16GBZL(XMP)
2GB
DS
DS
DS
DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8-8-8-24
9-9-9-24
9-9-9-24
9-10-9-27
9-10-9-28
1.55V-1.75V
1.65V
•
•
•
•
•
•
•
•
•
•
CORSAIR
CORSAIR
CORSAIR
G.SKILL
G.SKILL
G.SKILL
G.SKILL
4GB(2 x 2GB)
6GB(3 x 2GB)
8GB(2 x 4GB)
•
•
•
•
•
•
•
•
•
1.65V
1.50V
16GB ( 4GB x4 ) DS
1.5V
F3-14900CL10Q2-64GBZLD(XMP) 64GB ( 8GBx 8 ) DS
10-11-10-30 1.5V
F3-14900CL9D-8GBXL(XMP)
F3-14900CL9Q-8GBXL(XMP)
8GB(2 x 4GB)
8GB(2GBx4)
3GB(3 x 1GB)
6GB(3 x 2GB)
DS
DS
SS
DS
9-10-9-28
1.5V
9-9-9-24
1.6V
KINGSTON KHX1866C9D3T1K3/3GX(XMP)
-
-
1.65V
1.65V
KINGSTON KHX1866C9D3T1K3/6GX(XMP)
1-16
Chapter 1: Product introduction
DDR3-1600 MHz capability
DIMM socket
support (Optional)
SS/
DS
Chip
Brand
Vendors
Part No.
Size
Chip NO.
Timing
Voltage
1 DIMM 1 DIMM
3CCD-1509A
EL1126T
A-DATA
AM2U16BC2P1
AD31600E001GM(O)U3K
AX3U1600XB2G79-2X(XMP) 4GB(2 x 2GB) DS
2GB
SS A-DATA
-
-
•
•
A-DATA
A-DATA
3GB(3 x 1GB) SS
-
-
-
-
8-8-8-24 1.65V-1.85V
•
•
•
•
7-9-7-21 1.55V-1.75V
3CCD-1509
A EL1126T
A-DATA
AM2U16BC4P2
4GB
DS A-DATA
-
-
•
•
A-DATA
AX3U1600GC4G9-2G(XMP)
8GB(2 x 4GB) DS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9-9-9-24 1.55V-1.75V
7-9-7-21 1.55V-1.75V
8-8-8-24 1.65V
8-8-8-24 1.65V
8-8-8-24 1.65V
9-9-9-24 1.65V
7-8-7-20 1.65V
9-9-9-24 1.65V
9-9-9-24 1.65V
8-8-8-24 1.65V
8-8-8-24 1.65V
9-9-9-24 1.65V
9-9-9-24 1.65V
7-8-7-20 1.50V
9-9-9-24 1.65V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
A-DATA
AX3U1600XC4G79-2X(XMP) 8GB(2 x 4GB) DS
TR3X3G1600C8D(XMP) 3GB(3 x 1GB) SS
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
CMD12GX3M6A1600C8(XMP) 12GB(6x2GB) DS
CMP4GX3M2A1600C8(XMP) 4GB(2 x 2GB) DS
CMP4GX3M2A1600C9(XMP) 4GB(2 x 2GB) DS
CMP4GX3M2C1600C7(XMP) 4GB(2 x 2GB) DS
CMX4GX3M2A1600C9(XMP) 4GB(2 x 2GB) DS
CMX4GX3M2A1600C9(XMP) 4GB(2 x 2GB) DS
TR3X6G1600C8 G(XMP)
TR3X6G1600C8D G(XMP)
TR3X6G1600C9 G(XMP)
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
CMP8GX3M2A1600C9(XMP) 8GB(2 x 4GB) DS
CMZ8GX3M2A1600C7R(XMP) 8GB(2 x 4GB) DS
CMX8GX3M4A1600C9(XMP) 8GB(4 x 2GB) DS
BL25664BN1608.16FF(XMP) 6GB(3 x 2GB) DS
F3-12800CL9D-2GBNQ(XMP) 2GB(2 x 1GB) SS
F3-12800CL7D-4GBRH(XMP) 4GB(2 x 2GB) SS
-
-
G.SKILL
9-9-9-24 1.5V
G.SKILL
7-7-7-24 1.6V
F3-12800CL7D-
4GB(2 x 2GB) DS
4GBECO(XMP)
G.SKILL
-
-
7-7-8-24 XMP 1.35V
•
•
G.SKILL
G.SKILL
F3-12800CL7D-4GBRM(XMP) 4GB(2 x 2GB) DS
-
-
-
-
7-8-7-24 1.6V
•
•
•
•
F3-12800CL8D-4GBRM(XMP) 4GB(2 x 2GB) DS
8-8-8-24 1.60V
F3-12800CL9D-
4GB(2 x 2GB) DS
4GBECO(XMP)
G.SKILL
-
-
9-9-9-24 XMP 1.35V
•
•
G.SKILL
G.SKILL
G.SKILL
F3-12800CL9D-4GBRL(XMP) 4GB(2 x 2GB) DS
F3-12800CL9T-6GBNQ(XMP) 6GB(3 x 2GB) DS
F3-12800CL7D-8GBRH(XMP) 8GB(2 x 4GB) DS
-
-
-
-
-
-
9-9-9-24 1.5V
•
•
•
•
•
•
9-9-9-24 1.5V~1.6V
7-8-7-24 1.6V
F3-12800CL8D-
8GB(2 x 4GB) DS
8GBECO(XMP)
G.SKILL
G.SKILL
GEIL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8-8-8-24 XMP 1.35V
9-9-9-24 1.5V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
F3-12800CL9D-8GBRL(XMP) 8GB(2 x 4GB) DS
16GB ( 4x
4GB )
GET316GB1600C9QC(XMP)
GV34GB1600C8DC(XMP)
DS
9-9-9-28 1.6V
GEIL
2GB
DS
8-8-8-28 1.6V
FLGD45F-B8MF7
MAEH(XMP)
KINGMAX
KINGMAX
KINGMAX
1GB
SS
7
-
-
FLGE85F-B8KJ9A FEIS(XMP) 2GB
DS
DS
-
FLGE85F-B8MF7
2GB
7
-
-
MEEH(XMP)
KINGSTON KHX1600C9D3P1K2/4G
4GB(2 x 2GB) SS
-
-
-
-
1.5V
•
•
•
•
KINGSTON KHX1600C9D3K3/12GX(XMP) 12GB(3x4GB) DS
9-9-9-27 1.65V
KHX1600C9D3T1BK3/
12GX(XMP)
KINGSTON
12GB(3x4GB) DS
-
-
-
-
9-9-9-27 1.65V
•
•
•
•
•
•
KINGSTON KHX1600C9AD3/2G
2GB
2GB
DS
-
1.65V
D1288JPND
PLD9U
11-11-
11-28
KINGSTON KVR1600D3N11/2G-ES
DS KTC
1.35V-1.5V
KINGSTON KHX1600C7D3K2/4GX(XMP) 4GB ( 2x 2GB ) DS
KINGSTON KHX1600C8D3K2/4GX(XMP) 4GB(2 x 2GB) DS
KHX1600C8D3T1K2/
-
-
-
-
-
1.65V
1.65V
•
•
•
•
8
KINGSTON
4GB(2 x 2GB) DS
-
-
8
1.65V
•
•
4GX(XMP)
KINGSTON KHX1600C9D3K2/4GX(XMP) 4GB(2 x 2GB) DS
KINGSTON KHX1600C9D3LK2/4GX(XMP) 4GB(2 x 2GB) DS
KHX1600C9D3X2K2/
-
-
-
-
9
9
1.65V
•
•
•
•
XMP 1.35V
KINGSTON
4GB(2 x 2GB) DS
-
-
9-9-9-27 1.65V
•
•
4GX(XMP)
KHX1600C9D3T1K3/
6GX(XMP)
KINGSTON
6GB ( 3x 2GB ) DS
-
-
-
-
-
-
-
1.65V
1.65V
•
•
•
•
•
•
KINGSTON KHX1600C9D3K3/6GX(XMP) 6GB(3 x 2GB) DS
9
KHX1600C9D3T1BK3/
6GX(XMP)
KINGSTON
6GB(3 x 2GB) DS
9-9-9-27 1.65V
KINGSTON KHX1600C9D3K2/8GX(XMP) 8GB(2 x 4GB) DS
-
-
-
-
-
-
9-9-9-27 1.65V
•
•
•
•
•
•
•
•
KINGSTON KHX1600C9D3P1K2/8G
8GB(2 x 4GB) DS
-
1.5V
Super Talent WA160UX6G9
6GB(3 x 2GB) DS
9
-
-
-
Transcend
JM1600KLN-8GK
8GB(4GBx2)
DS Transcend TK483PCW3
(continued on the next page)
1-17
ASUS P8H77-I
DDR3-1600 MHz capability
DIMM socket
support (Optional)
SS/
DS
Chip
Brand
Vendors
Part No.
Size
Chip NO.
Timing
Voltage
1 DIMM 1 DIMM
3CCD-1509A
EL1126T
A-DATA
AM2U16BC2P1
AD31600E001GM(O)U3K
AX3U1600XB2G79-2X(XMP) 4GB(2 x 2GB) DS
2GB
SS A-DATA
-
-
•
•
A-DATA
A-DATA
3GB(3 x 1GB) SS
-
-
-
-
8-8-8-24 1.65V-1.85V
•
•
•
•
7-9-7-21 1.55V-1.75V
3CCD-1509
A EL1126T
A-DATA
AM2U16BC4P2
4GB
DS A-DATA
-
-
•
•
A-DATA
AX3U1600GC4G9-2G(XMP)
8GB(2 x 4GB) DS
-
-
-
-
-
-
-
-
-
-
9-9-9-24 1.55V-1.75V
7-9-7-21 1.55V-1.75V
8-8-8-24 1.65V
•
•
•
•
•
•
•
•
•
•
A-DATA
AX3U1600XC4G79-2X(XMP) 8GB(2 x 4GB) DS
TR3X3G1600C8D(XMP) 3GB(3 x 1GB) SS
CORSAIR
CORSAIR
CORSAIR
CMD12GX3M6A1600C8(XMP) 12GB(6x2GB) DS
8-8-8-24 1.65V
CMP4GX3M2A1600C8(XMP) 4GB(2 x 2GB) DS
8-8-8-24 1.65V
DDR3-1333 MHz capability
DIMM socket
support (Optional)
SS/
DS
Vendors
Part No.
Size
Chip Brand
Chip NO.
Timing
Voltage
1 DIMM 2 DIMMs
AD30908C8D-
151C E0906
A-DATA
AD31333001GOU
1GB
SS A-Data
-
-
•
•
A-DATA
A-DATA
A-DATA
A-DATA
AD3U1333C2G9
AD63I1B0823EV
AM2U139C2P1
2GB
2GB
2GB
2GB
SS A-DATA
SS A-Data
SS ADATA
3CCD-1509HNA1126L
3CCA-1509A
3CCD-1509A EL1127T
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
AX3U1333C2G9-BP
SS
-
3GB(3
x 1GB)
A-DATA
A-DATA
AD31333G001GOU
SS
-
-
-
8-8-8-24
9-9-9-24
1.65-1.85V
•
•
•
•
AXDU1333GC
2G9-2G(XMP)
4GB(2
x 2GB)
1.25V-1.35V
(low voltage)
SS
DS
-
-
A-DATA
A-DATA
A-DATA
A-DATA
Apacer
Apacer
Apacer
Apacer
AD31333G002GMU
AD63I1C1624EV
AM2U139C4P2
2GB
4GB
4GB
8GB
2GB
2GB
2GB
4GB
-
8-8-8-24
1.65-1.85V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DS A-Data
DS ADATA
DS ELPIDA
DS Apacer
DS Apacer
DS Apacer
DS Apacer
3CCA-1509A
-
-
-
-
9
-
-
-
-
-
-
-
-
-
3CCD-1509A EL1127T
J4208BASE-DJ-F
AM5D5808DEWSBG
AM5D5808FEQSBG
AM5D5808APQSBG
AM5D5908CEHSBG
SU3U1333W8G9-B
78.A1GC6.9L1
78.A1GC6.9L1
AU02GFA33C9NBGC
78.B1GDE.9L10C
3GB(3
x 1GB)
CORSAIR
CORSAIR
CORSAIR
CORSAIR
TR3X3G1333C9 G
TR3X6G1333C9 G
SS
SS
DS
DS
-
-
-
-
-
-
-
-
9-9-9-24
9-9-9-24
9-9-9-24
9-9-9-24
1.50V
1.50V
1.60V
1.50V
•
•
•
•
•
•
•
•
6GB(3x
2GB)
CMD24GX3M6A
1333C9(XMP)
4GB(2
x 2GB)
TW3X4G1333C9D G
256MBDCJGELC
0401136
CORSAIR
CORSAIR
CORSAIR
CM3X4GA1333C9N2
CMX4GX3M1A1333C9
CMD8GX3M4A1333C7
4GB
4GB
DS CORSAIR
9-9-9-24
9-9-9-24
7-7-7-20
-
•
•
•
•
•
•
DS
DS
-
-
-
1.50V
1.60V
8GB(4
x 2GB)
-
Crucial
Crucial
CT12864BA1339.8FF
CT25664BA1339.16FF
1GB
SS Micron
DS Micron
9FF22D9KPT
9KF27D9KPT
9
9
-
-
•
•
•
•
2GB
BL25664BN
1337.16FF (XMP)
6GB(3
x 2GB)
Crucial
DS
-
-
7-7-7-24
1.65V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.35V
(low voltage)
ELPIDA
ELPIDA
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
EBJ10UE8EDF0-DJ-F
EBJ21UE8EDF0-DJ-F
1GB
2GB
1GB
SS ELPIDA
DS ELPIDA
SS G.SKILL
J1108EDSE-DJ-F
-
1.35V
(low voltage)
J1108EDSE-DJ-F
-
F3-10600CL8D
-2GBHK(XMP)
-
-
-
-
-
-
-
-
-
2GB(2
x 1GB)
F3-10600CL9D-2GBNQ
SS
SS
DS
DS
DS
DS
-
-
-
-
-
-
9-9-9-24
7-7-7-18
1.5V
F3-10666CL7T
-3GBPK(XMP)
3GB(3
x 1GB)
1.5~1.6V
F3-10666CL8D-
4GBECO(XMP)
4GB(2
x 2GB)
8-8-8-8-24 XMP 1.35V
F3-10666CL7T
-6GBPK(XMP)
6GB(3
x 2GB)
7-7-7-18
7-7-7-21
9-9-9-24
1.5~1.6V
1.5V
F3-10666CL7D
-8GBRH(XMP)
8GB(2
x 4GB)
2GB(2
x 1GB)
GV32GB1333C9DC
1.5V
(continued on the next page)
1-18
Chapter 1: Product introduction
DDR3-1333 MHz capability
DIMM socket
support (Optional)
SS/
DS
Vendors
Part No.
Size
Chip Brand
Chip NO.
Timing
Voltage
1.3V
1 DIMM 2 DIMMs
4GB(2
x 2GB)
GEIL
GG34GB1333C9DC
GV34GB1333C9DC
GVP34GB1333C7DC
DS GEIL
GL1L128M88BA12N
9-9-9-24
9-9-9-24
7-7-7-24
•
•
•
•
•
•
(low voltage)
4GB(2
x 2GB)
GEIL
GEIL
DS
DS
-
-
-
-
1.5V
4GB(2
x 2GB)
1.5V
1.35V
(low voltage)
Hynix
Hynix
Hynix
HMT112U6TFR8A-H9
HMT325U6BFR8C-H9
HMT125U6TFR8A-H9
1GB
2GB
2GB
SS Hynix
SS Hynix
DS Hynix
H5TC1G83TFRH9A
H5TQ2G83BFRH9C
H5TC1G83TFRH9A
-
-
-
•
•
•
•
•
•
-
1.35V
(low voltage)
Hynix
HMT351U6BFR8C-H9
FLFD45F-B8KL9 NAES
FLFE85F-C8KF9 CAES
FLFE85F-C8KL9 NAES
FLFE85F-C8KM9 NAES
FLFE85F-B8KL9 NEES
FLFF65F-C8KL9 NEES
FLFF65F-C8KM9 NEES
4GB
1GB
2GB
2GB
2GB
2GB
4GB
4GB
DS Hynix
H5TQ2G83BFRH9C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
KINGMAX
SS KINGMAX
SS KINGMAX
SS KINGMAX
SS KINGMAX
DS KINGMAX
DS KINGMAX
DS KINGMAX
KKB8FNWBFGNX-27A
KFC8FMFXF-DXX-15A
KFC8FNLXF-DXX-15A
KFC8FNMXF-BXX-15A
KKB8FNWBFGNX-26A
KFC8FNLXF-DXX-15A
KFC8FNMXF-BXX-15A
KVR1333D3N
9/1G(low profile)
KINGSTON
1GB
SS ELPIDA
J1108BDBG-DJ-F
9
1.5V
•
•
KVR1333D3N
9/2G(low profile)
KINGSTON
KINGSTON
KINGSTON
2GB
2GB
2GB
SS Hynix
H5TQ2G83AFRH9C
IID77 D9LGK
9
-
-
•
•
•
•
•
•
KVR1333D3S8N9/2G
SS Micron
SS ELPIDA
1.5V
1.5V
KVR1333D3S8N
9/2G-SP(low profile)
J2108BCSE-DJ-F
-
KVR1333D3N9/2G(low
profile)
KINGSTON
2GB
DS ELPIDA
J1108BFBG-DJ-F
9
1.5V
•
•
KINGSTON
KINGSTON
KVR1333D3N9/2G
KVR1333D3N9/2G
2GB
2GB
DS KTC
D1288JPNDPLD9U
J1108BDSE-DJ-F
9
9
1.5V
1.5V
•
•
•
•
DS ELPIDA
KVR1333D3N
9/2G-SP(low profile)
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
2GB
2GB
DS KTC
D1288JEMFNGD9U
-
1.5V
•
•
•
•
•
•
•
•
•
•
•
•
KVR1333D3N
9/2G-SP(low profile)
DS KINGSTON
D1288JPSFPGD9U
-
1.5V
KHX1333C7D3K
2/4GX(XMP)
4GB(2
x 2GB)
DS
DS
-
-
-
7
9
9
-
1.65V
XMP 1.25V
1.5V
KHX1333C9D3UK2/
4GX(XMP)
4GB(2
x 2GB)
-
KVR1333D3N
9/4G(low profile)
4GB
4GB
DS ELPIDA
DS ELPIDA
J2108BCSE-DJ-F
J2108BCSE-DJ-F
KVR1333D3
N9/4G(low profile)
1.5V
KINGSTON
KINGSTON
KVR1333D3N9/4G
KVR1333D3N9/4G
4GB
4GB
DS KTC
D2568JENCNGD9U
H5TQ2G83AFR
-
-
1.5V
-
•
•
•
•
DS Hynix
KVR1333D3N
9/4G-SP(low profile)
KINGSTON
4GB
DS KINGSTON
D2568JENCPGD9U
-
1.5V
•
•
Micron
MT4JTF12864AZ-1G4D1 1GB
MT8JTF12864AZ-1G4F1 1GB
SS Micron
OJD12D9LGQ
9FF22D9KPT
OJD12D9LGK
IJM22 D9PFJ
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Micron
SS Micron
9
-
Micron
MT8JTF25664AZ-1G4D1 2GB
MT8JTF25664AZ-1G4M1 2GB
MT16JTF25664AZ-1G4F1 2GB
MT16JTF51264AZ-1G4D1 4GB
SS Micron
Micron
SS MICRON
DS Micron
-
Micron
9KF27D9KPT
OLD22D9LGK
NT5CB256M8GN-CG
A3P1GF3FGF
A3P1GF3FGF
K4B1G0846F
9
-
Micron
DS Micron
NANYA
NT4GC64B8HG0NF-CG
AL7F8G73F-DJ2
4GB
1GB
2GB
1GB
2GB
2GB
4GB
8GB
1GB
DS NANYA
SS PSC
-
PSC
-
PSC
AL8F8G73F-DJ2
DS PSC
-
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
Super Talent
M378B2873FHS-CH9
M378B5773DH0-CH9
M378B5673FH0-CH9
M378B5273CH0-CH9
M378B1G73AH0-CH9
W1333UA1GH
SS SAMSUNG
SS SAMSUNG
DS SAMSUNG
DS SAMSUNG
DS SAMSUNG
SS Hynix
-
K4B2G0846D
K4B1G0846F
-
-
K4B2G0846C
K4B4G0846A-HCH9
H5TQ1G83TFR
-
-
9
2GB(2x
1GB)
Super Talent
W1333UX2G8(XMP)
SS
-
-
8
-
•
•
Super Talent
Super Talent
W1333UB2GS
W1333UB4GS
2GB
DS SAMSUNG
DS SAMSUNG
K4B1G0846F
K4B2G0846C
9
-
-
-
•
•
•
•
4GB
6GB(3x
2GB)
Super Talent
W1333UX6GM
DS Micron
0BF27D9KPT
9-9-9-24
1.5V
•
•
Transcend
Transcend
JM1333KLN-2G
2GB
2GB
SS Hynix
DS Micron
H5TQ2G83BZRH9C
9GF27D9KPT
-
-
-
-
•
•
•
•
TS256MLK64V3U
PC3-10600 DDR3
-1333 9-9-9
Century
1GB
SS NANYA
NT5CB128M8DN-CF
-
-
•
•
(continued on the next page)
1-19
ASUS P8H77-I
DDR3-1333 MHz capability
DIMM socket
support (Optional)
SS/
DS
Vendors
Elixir
Part No.
Size
2GB
Chip Brand
Chip NO.
Timing
Voltage
1 DIMM 2 DIMMs
M2F2G64CB88B7N-CG
M2F2G64CB88D7N-CG
M2F2G64CB88G7N-CG
M2F4G64CB8HB5N-CG
M2F4G64CB8HD5N-CG
SS Elixir
N2CB2G80BN-CG
N2CB2G80DN-CG
N2CB2G80GN-CG
N2CB2G80BN-CG
N2CB2G80DN-CG
PM128M8D385-15
PE911-125E
-
-
-
-
-
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Elixir
Elixir
Elixir
Elixir
2GB
2GB
4GB
4GB
2GB
2GB
SS Elixir
SS Elixir
DS Elixir
DS Elixir
KINGSHARE KSRPCD313332G
DS PATRIOT
SS MICRON
KINGSTEK
Kingtiger
Kingtiger
KSTD3PC-10600
SEC 904 HCH9
K4B1G0846D
2GB DIMM PC3-10666
2GB
DS SAMSUNG
-
-
•
•
KTG2G1333PG3
2GB
DS
-
-
-
-
-
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MARKVISION BMD32048M1333C9-1123 2GB
DS MARKVISION M3D1288P-13
-
MARKVISION BMD34096M1333C9-1124 4GB
DS MARKVISION M3D2568E-13
-
PATRIOT
PATRIOT
PATRIOT
PATRIOT
RAMAXEL
RAMAXEL
RiDATA
PSD31G13332H
PSD31G13332
1GB
1GB
2GB
8GB
DS
-
-
9
-
DS PATRIOT
PM64M8D38U-15
PSD32G13332H
PG38G1333EL(XMP)
DS
DS
-
-
-
-
-
9-9-9-24
1.5V
RMR1870ED48E8F-1333 2GB
DS ELPIDA
DS ELPIDA
DS RiDATA
DS RiDATA
J1108BDBG-DJ-F
-
-
-
-
-
RMR1870EC58E9F-1333 4GB
J2108BCSE-DJ-F
-
C304627CB1AG22Fe
E304459CB1AG32Cf
2GB
N/A
N/A
9
9
RiDATA
4GB
SILICON
POWER
SP001GBLTU133S01
SP001GBLTU133S02
SP002GBLTU133S02
1GB
1GB
2GB
SS NANYA
SS Elixir
DS Elixir
NT5CB128M8AN-CG
N2CB1680AN-C6
N2CB1680AN-C6
9
9
9
-
-
-
•
•
•
•
•
•
SILICON
POWER
SILICON
POWER
TAKEMS
TAKEMS
TAKEMS
TAKEMS
UMAX
TMS1GB364D081-107EY 1GB
TMS2GB364D081-107EY 2GB
TMS2GB364D081-138EY 2GB
TMS2GB364D082-138EW 2GB
SS
DS
DS
DS
-
-
-
-
-
7-7-7-20
7-7-7-20
8-8-8-24
8-8-8-24
-
1.5V
1.5V
1.5V
1.5V
-
•
•
•
•
•
•
•
•
•
•
•
•
-
-
-
E41302GP0-73BDB
3WVS31333-2G-CNR
2GB
2GB
DS UMAX
DS AMPO
U2S24D30TP-13
AM3420803-13H
WINTEC
-
-
DDR3-1066 MHz capability
DIMM socket support
(Optional)
SS/
DS
Chip
Brand
Vendors
Part No.
Size
Chip NO.
Timing
Voltage
1 DIMM
2 DIMMs
Crucial
CT12864BA1067.8FF
CT25664BA1067.16FF
EBJ10UE8EDF0-AE-F
EBJ21UE8EDF0-AE-F
1GB SS Micron
9GF22D9KPT
9HF22D9KPT
7
7
-
-
-
•
•
•
•
•
•
•
•
Crucial
ELPIDA
ELPIDA
2GB DS Micron
1GB SS ELPIDA J1108EDSE-DJ-F
1.35V(low voltage)
1.35V(low voltage)
2GB DS ELPIDA J1108EDSE-DJ-F
-
KVR1066D3N7/1G(low
profile)
KINGSTON
1GB SS ELPIDA J1108BFSE-DJ-F
7
1.5V
•
•
KINGSTON KVR1066D3N7/2G
2GB DS ELPIDA J1108BDSE-DJ-F
7
7
7
1.5V
1.5V
-
•
•
•
•
•
•
KINGSTON KVR1066D3N7/4G
4GB DS Hynix
H5TQ2G83AFR
9GF22D9KPT
Micron
MT8JTF12864AZ-1G1F1 1GB SS Micron
MT16JTF25664AZ-
2GB DS Micron
1G1F1
Micron
9HF22D9KPT
7
-
-
-
•
•
•
•
Kingtiger
2GB DIMM PC3-8500
2GB DS Hynix
H5TQ1G83AFP G7C
SS: Single-sided / DS: Double-sided
DIMM support:
•
1 DIMM: Supports one module inserted into any slot as single-channel memory
configuration.
•
2 DIMMs Supports one pair of modules inserted into both the blue slot and the black slot
as one pair of dual-channel memory configuration.
•
DDR3 1600 MHz and above memory frequency is supported by Intel® 3rd generation
processors.
•
Chapter 1: Product introduction
1-20
1.7.3
Installing a DIMM
Unplug the power supply before adding or removing DIMMs or other system components.
Failure to do so can cause severe damage to both the motherboard and the components.
2
DIMM notch
1.
Press the retaining clips outward to
unlock a DIMM socket.
2.
Align a DIMM on the socket such that
the notch on the DIMM matches the
DIMM slot key on the socket.
1
Unlocked
retaining clip
DIMM slot key
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the socket
until the retaining clips snap back in place
and the DIMM is properly seated.
3
Locked Retaining Clip
1.7.4
Removing a DIMM
To remove a DIMM:
2
1.
Simultaneously press the retaining clips
outward to unlock the DIMM.
1
Support the DIMM lightly with your
fingers when pressing the retaining
clips. The DIMM might get damaged
when it flips out with extra force.
DIMM notch
2.
Remove the DIMM from the socket.
1-21
ASUS P8H77-I
1.8
Expansion slots
In the future, you may need to install expansion cards. The following sub-sections describe
the slots and the expansion cards that they support.
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
1.8.1
Installing an expansion card
To install an expansion card:
1.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
2.
3.
Remove the system unit cover (if your motherboard is already installed in a chassis).
Remove the bracket opposite the slot that you intend to use. Keep the screw for later
use.
4.
Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
5.
6.
Secure the card to the chassis with the screw you removed earlier.
Replace the system cover.
1.8.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.
Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for
information on BIOS setup.
2.
3.
Assign an IRQ to the card.
Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that
the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI
groups, making the system unstable and the card inoperable.
1.8.3
PCI Express x16 slots
This motherboard has one PCI Express x16 slot that supports PCI Express x16 graphic card
complying with the PCI Express specifications.
1-22
Chapter 1: Product introduction
1.9
Jumpers
1.
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
CLRTC
I
-
P
Normal
Clear RTC
(Default)
P8H77-I Clear RTC RAM
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
•
•
If the steps above do not help, remove the onboard battery and move the jumper again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature. Shut
down and reboot the system, then the BIOS automatically resets parameter settings to
default values.
1-23
ASUS P8H77-I
1.10
1.10.1
1
Connectors
Rear panel connectors
2
3
4
5 6
9
8
7
12
11
10
1.
2.
PS/2 Keyboard / Mouse combo port. This port is for a PS/2 keyboard or mouse.
Optical S/PDIF Out port. This port connects an external audio output device via an
optical S/PDIF cable.
3.
4.
Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub. Refer to the table below for the LAN port LED indications.
LAN port LED indications
Speed
LED
Activity Link
LED
Activity/Link LED
Speed LED
Status
Status
Description
Description
OFF
No link
OFF
10Mbps connection
100Mbps connection
1Gbps connection
ORANGE
BLINKING
Linked
ORANGE
GREEN
Data activity
LAN port
5.
Line In port (light blue). This port connects to the tape, CD, DVD player, or other
audio sources.
6.
7.
Line Out port (lime). This port connects to a headphone or a speaker. In the 4, 6 and
8-channel configurations, the function of this port becomes Front Speaker Out.
Microphone port (pink). This port connects to a microphone.
Refer to the audio configuration table below for the function of the audio ports in the 2, 4, 6,
or 8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port
Headset 2-channel
4-channel
6-channel
8-channel
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
Line In
Line Out
Mic In
–
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Front Speaker Out
Bass/Center
Front Speaker Out Front Speaker Out
Mic In
–
Bass/Center
–
Side Speaker Out
1-24
Chapter 1: Product introduction
8.
9.
USB 2.0 ports 1 ~ 4. These four 4-pin Universal Serial Bus (USB) ports are available
for connecting USB 2.0/1.1 devices.
USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports are
available for connecting USB 3.0 devices.
•
•
DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows®
operating system.
Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows®
OS environment and after the USB 3.0 driver installation.
•
•
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
10. DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be converted to
output RGB Signal to CRT and isn’t compatible with DVI-I.
11. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
12. USB 2.0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0 devices.
1-25
ASUS P8H77-I
1.10.2
Internal connectors
1.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
AAFP
PIN 1
PIN 1
I
P
HD-audio-compliant
pin definition
Legacy AC’97
compliant definition
P8H77-I Front panel audio connector
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97
front panel audio module to this connector, set the item to [AC97]. By default, this
connector is set to [HD]. See section 2.5.6 Onboard Devices Configuration for details.
2.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
I
7
P
SPDIF_OUT
P8H77-I Digital audio connector
The S/PDIF module is purchased separately.
1-26
Chapter 1: Product introduction
3.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
ATX12V
EATXPWR
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PIN 1
+5 Volts
GND
I
7
+5 Volts
GND
PSON#
GND
-12 Volts
+3 Volts
P
+3 Volts
+3 Volts
PIN 1
P8H77-I ATX power connectors
•
For a fully configured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum
power of 350 W.
•
•
DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will
not boot up.
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or may
not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
4.
CPU, and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
CHA_FAN
1
CPU_FAN
ꢀ
0
8
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
8 0ꢀꢀꢁ1ꢂNIVꢂKWVVMK\WZ[
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.
1-27
ASUS P8H77-I
5.
Speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
SPEAKER
ꢀ
0
8
PIN 1
P8H77-IꢂSpeaker Out Connector
6.
System panel connector (10-1 pin PANEL)
This connector supports several chassis-mounted functions.
F_PANEL
GND
PWR
PLED-
PLED+
Reset
Ground
I
7
HD_LED-
HD_LED+
P
PIN 1
P8H77-I System panel connector
•
•
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
Hard disk drive activity LED (2-pin +HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
•
•
Power/Soft-off button (2-pin PWRBTN)
This 2-pin connector is for the system power button.
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
1-28
Chapter 1: Product introduction
7.
Intel® H77 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4 [blue])
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 0+1(10)
configurations with the Intel® Rapid Storage Technology through the onboard Intel® H77
chipset.
SATA3G_1
SATA3G_2
SATA3G_3
I
SATA3G_4
P
P8H77-I SATA 3.0Gb/s connectors
•
These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID
set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID].
See section 2.5.3 SATA Configuration for details.
•
•
Before creating a RAID set, refer to the RAID Supplementary Guide included in the
folder named Manual in the support DVD.
You must install Windows® XP Service Pack 3 or later version before using Serial ATA
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows® XP SP3 or later version.
•
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI]. See section 2.5.3 SATA Configuration for details.
1-29
ASUS P8H77-I
8.
Intel® H77 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2 [gray])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
SATA6G_1
ꢀ
0
8
SATA6G_2
8 0ꢀꢀꢁ1ꢂ;)<)ꢂꢃꢄꢅ/Jꢆ[ꢂKWVVMK\WZ[
•
These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID
set using these connectors, set the SATA Mode Selection item in the BIOS to [RAID].
See section 2.5.3 SATA Configuration for details.
•
•
Before creating a RAID set, refer to the RAID Supplementary Guide included in the
folder named Manual in the support DVD.
You must install Windows® XP Service Pack 3 or later version before using Serial ATA
hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if
you are using Windows® XP SP3 or later version.
•
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI]. See section 2.5.3 SATA Configuration for details.
9.
USB 3.0 connector (20-1 pin USB3_34)
This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable
to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your
chassis support customized front panel installation, with ASUS USB 3.0 header, you
can have a front panel USB 3.0 solution.
I
P
P8H77-I USB3.0 Front panel connector
The USB 3.0 module is purchased separately.
1-30
Chapter 1: Product introduction
10. USB connectors (10-1 pin USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
USB78
PIN
1
I
7
USB+5V
USB_P8-
USB_P8+
GND
USB+5V
P
USB_P7-
USB_P7+
GND
NC
P8H77-I USB2.0 connector
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB module cable is purchased separately.
1-31
ASUS P8H77-I
1.11
Software support
1.11.1
Installing an operating system
This motherboard supports Windows® XP / 7 Operating Systems (OS). Always install the
latest OS version and corresponding updates to maximize the features of your hardware.
•
•
Motherboard settings and hardware options vary. Refer to your OS documentation for
detailed information.
Ensure that you install Windows® XP Service Pack 3 or later versions before installing
the drivers for better compatibility and system stability.
1.11.2
Support DVD information
The Support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the Support DVD are subject to change at any time without notice. Visit the
To run the Support DVD
Place the Support DVD to the optical drive. The DVD automatically displays the Drivers menu
if Autorun is enabled in your computer.
The following screen is for reference only.
Click an icon to
display Support DVD/
motherboard information
Click an item to install
If Autorun is NOT enabled in your computer, browse the contents of the Support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
1-32
Chapter 1: Product introduction
Chapter 2
BIOS information
2.1
Managing and updating your BIOS
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to
restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update
utility.
2.1.1
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update the motherboard
BIOS in Windows® environment.
•
•
ASUS Update requires an Internet connection either through a network or an Internet
Service Provider (ISP).
This utility is available in the support DVD that comes with the motherboard package.
Installing ASUS Update
To install ASUS Update:
1.
2.
3.
Place the support DVD in the optical drive. The Drivers menu appears.
Click the Utilities tab, then click AI Suite II.
Follow the onscreen instructions to complete the installation.
Quit all Windows® applications before you update the BIOS using this utility.
Updating the BIOS
To update the BIOS:
1.
From the Windows® desktop, click Start > Programs > ASUS > AI Suite II > AI Suite II X.XX.XX to
launch the AI Suite II utility. The AI Suite II Quick Bar appears.
2.
Click Update button from the Quick Bar, and then click ASUS Update from the popup menu. The
ASUS Update main screen appears. From the list, select either of the following methods:
Updating from the Internet
a.
b.
c.
Select Update BIOS from the Internet, then click Next.
Select the ASUS FTP site nearest you to avoid network traffic, then click Next.
From the FTP site, select the BIOS version that you wish to download then click Next.
ASUS P8H77-I
2-1
The ASUS Update utility is capable of updating itself through the Internet. Always update
the utility to avail all its features.
Updating from a BIOS file
a.
Select Update BIOS from file, then click Next.
b.
Locate the BIOS file from the Open window, then click Open.
3.
Follow the onscreen instructions to complete the updating process.
2.1.2
ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
To update the BIOS using EZ Flash 2:
1.
2.
Insert the USB flash disk that contains the latest BIOS file to the USB port.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ
Flash Utility and press <Enter> to enable it.
Exit
ASUS EZ Flash 2 Utility V01.04
Flash Info
MODEL: P8H77-I
VER: 0214
DATE: 12/09/2011
File Path: fs0:\
Drive Info
fs0:\
Folder Info
12/09/2011 10:23p
8388608
P8H77I.CAP
File Info
MODEL:
VER:
DATE
Help Info
[Enter] Select or Load
[Tab] Switch
[Up/Down/PageUp/PageDown/Home/End] Move
[Esc] Exit
[F2] Backup
2-2
Chapter 2: BIOS information
3.
4.
Press <Tab> to switch to the Drive field.
Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then
press <Enter>.
5.
Press <Tab> to switch to the Folder Info field.
6.
Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform the BIOS
update process. Reboot the system when the update process is done.
•
This function supports USB flash disks with FAT 32/16 format and single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
2.1.3
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file
when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS
file using the motherboard support DVD or a USB flash drive that contains the updated BIOS
file.
•
•
Before using this utility, rename the BIOS file in the removable device into
P8H77I.CAP.
The BIOS file in the support DVD may not be the latest version. Download the latest
BIOS file from the ASUS website at www.asus.com.
Recovering the BIOS
To recover the BIOS:
1.
Turn on the system.
2.
Insert the support DVD to the optical drive or the USB flash drive that contains the BIOS file to the
USB port.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility reads the BIOS
file and enters ASUS EZ Flash 2 utility automatically.
4.
The system requires you to enter BIOS Setup to recover BIOS setting. To ensure system
compatibility and stability, we recommend that you press <F5> to load default BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
ASUS P8H77-I
2-3
2.1.4
ASUS BIOS Updater
The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also
allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or
gets corrupted during the updating process.
The succeeding utility screens are for reference only. The actual utility screen displays may
not be same as shown.
Before updating BIOS
1.
Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single
partition.
2.
Download the latest BIOS file and BIOS Updater from the ASUS website at
http://support.asus.com and save them on the USB flash drive.
NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS
Updater to a hard disk drive or USB flash drive in NTFS format.
3.
Turn off the computer and disconnect all SATA hard disk drives (optional).
Booting the system in DOS environment
1.
2.
Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS Boot Device
Select Menu. Insert the support DVD into the optical drive and select the optical drive as the boot
device.
Please select boot device:
SATA: XXXXXXXXXXXXXXXX
USB XXXXXXXXXXXXXXXXX
UEFI: XXXXXXXXXXXXXXXX
Enter Setup
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
3.
When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the
item number.
4.
At the FreeDOS prompt, type d:and press <Enter> to switch the disk from
Drive C (optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:\>d:
D:\>
2-4
Chapter 2: BIOS information
Backing up the current BIOS
To backup the current BIOS file using the BIOS Updater
Ensure that the USB flash drive is not write-protected and has enough free space to save
the file.
1.
At the FreeDOS prompt, type bupdater /o[filename]and press <Enter>.
D:\>bupdater /oOLDBIOS1.rom
Filename Extension
The [filename] is any user-assigned filename with no more than eight alphanumeric characters for
the filename and three alphanumeric characters for the extension.
2.
The BIOS Updater backup screen appears indicating the BIOS backup process. When BIOS
backup is done, press any key to return to the DOS prompt.
ASUSTek BIOS Updater for DOS V1.18
Current ROM
BOARD: P8H77-I
VER: 0214
Update ROM
BOARD: Unknown
VER: Unknown
DATE: 12/09/2011
DATE: Unknown
PATH: A:\
BIOS backup is done! Press any key to continue.
Note
Saving BIOS:
ASUS P8H77-I
2-5
Updating the BIOS file
To update the BIOS file using BIOS Updater
1.
At the FreeDOS prompt, type bupdater /pc /gand press <Enter>.
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.18
Current ROM
BOARD: P8H77-I
VER: 0214
Update ROM
BOARD: Unknown
VER: Unknown
DATE: 12/09/2011
DATE: Unknown
PATH: A:\
A:
P8H77I.CAP
8388608 2011-12-09 17:30:48
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
3.
Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys to select
the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file and prompts you to
confirm BIOS update.
Are you sure to update BIOS?
Yes
No
4.
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater.
Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS prompt
after updating BIOS.
•
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit menu. Refer to section 2.9
Exit menu for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
2-6
Chapter 2: BIOS information
2.2
BIOS setup program
Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS
screens include navigation keys and brief online help to guide you in using the BIOS Setup
program.
Entering BIOS Setup at startup
To enter BIOS Setup at startup:
•
Press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>,
POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
•
•
Press <Ctrl>+<Alt>+<Del> simultaneously.
Press the reset button on the system chassis.
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from
a running operating system can cause damage to your data or system. We recommend to
always shut down the system properly from the operating system.
•
•
•
•
The BIOS setup screens shown in this section are for reference purposes only, and may
not exactly match what you see on your screen.
motherboard.
Ensure that a USB mouse is connected to your motherboard if you want to use the
mouse to control the BIOS setup program.
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu. See section 2.9 Exit Menu for details.
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 1.9 Jumpers for information on
how to erase the RTC RAM.
ASUS P8H77-I
2-7
BIOS menu screen
The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the
EZ Mode/Advanced Mode screen.
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 2.7 Boot menu for details.
Selects the display language of the
BIOS setup program
Clicks to display all fan
speeds if available
Displays the CPU/motherboard temperature,
CPU/5V/3.3V/12V voltage output,
CPU/chassis fan speed
Exits the BIOS setup program without saving the
changes, saves the changes and resets the system,
or enters the Advanced Mode
Exit/Advanced Mode
English
EFI BIOS Utility - EZ Mode
P8H77-I
BIOS Version : 0214
CPU Type : Intel(R) Core(TM) i5-2400 CPU 0 @ 3.10GHz Speed : 3100 MHz
Total Memory : 1024 MB (DDR3 1333MHz)
Friday [10/08/2010]
Temperature
Voltage
Fan Speed
CPU_FAN 3325RPM CHA_FAN
CPU
MB
+113.0ºF/+45.0ºC
+75.2ºF/+40.0ºC
CPU
1.248V
3.344V
5V
5.160V
N/A
3.3V
12V
12.248V
Q-Fan Control
Quiet
Performance
Boot Priority
Energy Saving
Standard
Use the mouse to drag or keyboard to navigate to decide the boot priority.
Shortcut (F3)
Boot Menu(F8)
Default(F5)
Advanced Mode (F7)
Displays the Advanced
mode menus
Power Saving mode
Loads optimized default
Normal mode
ASUS Optimal mode
Selects the boot device priority
Selects the boot
device priority
Displays the system
properties of the selected
mode on the right hand side
Selects the Advanced
mode functions
•
•
The boot device options vary depending on the devices you installed to the system.
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
2-8
Chapter 2: BIOS information
Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure
the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the
following sections for the detailed configurations.
To access the EZ Mode, click Exit, then select ASUS EZ Mode.
Back button
EFI BIOS Utility - Advanced Mode
Menu items
Menu bar
Configuration fields
General help
Exit
Main
Back
Ai Tweaker
Advanced
Monitor
Boot
Tool
Advanced\ System Agent Configuration
>
Enable or disable memory remap
above 4G
System Agent Bridge Name
Memory Remap Feature
Enabled
>
>
Graphics Configuration
NB PCIe Configuration
Memory Remap Feature
Enabled
Disabled
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F6: ASUS Ratio Boost
F10: Save ESC: Exit
F12: Print Screen
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Pop-up window
Scroll bar
Submenu items
Navigation keys
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have
their respective menu items.
Back button
This button appears when entering a submenu. Press <Esc> or use the USB mouse to click
this button to return to the previous menu screen.
Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a
submenu. To display the submenu, select the item and press <Enter>.
ASUS P8H77-I
2-9
Pop-up window
Select a menu item and press <Enter> to display a pop-up window with the configuration
options for that item.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on
the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the
other items on the screen.
Navigation keys
At the bottom right corner of the menu screen are the navigation keys for the BIOS setup
program. Use the navigation keys to select items in the menu and change the settings.
General help
At the top right corner of the menu screen is a brief description of the selected item.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and
press <Enter> to display a list of options.
2-10
Chapter 2: BIOS information
2.3
Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Exit
EFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Choose the system default language
BIOS Information
BIOS Version
0214 x64
12/09/2011
8.0.0.1296
03/C0
Build Date
ME Version
South Bridge Steppping
CPU Information
Genuine Intel(R) CPU @ 2.90GHz
Speed
3100 MHz
Memory Information
Total Memory
Speed
1024 MB (DDR3)
1333 MHz
System Language
English
System Date
System Time
Access Level
[Mon 09/27/2010]
[16:46:15]
Administrator
>
Security
2.3.1
System Language [English]
Allows you to choose the BIOS language version from the options. Configuration options:
[English]
[Español] [Русский]
2.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.3.3
System Time [xx:xx:xx]
Allows you to set the system time.
2.3.4
Security
The Security menu items allow you to change the system security settings.
•
•
If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.9 Jumpers for information on how to
erase the RTC RAM.
The Administrator or User Password items on top of the screen show the default Not
Installed. After you set a password, these items show Installed.
ASUS P8H77-I
2-11
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator
password for accessing the system. Otherwise, you might be able to see or change only
selected fields in the BIOS setup program.
To set an administrator password:
1.
2.
3.
Select the Administrator Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
To change an administrator password:
1.
2.
3.
4.
Select the Administrator Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press <Enter>.
From the Create New Password box, key in a new password, then press <Enter>.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator
password, but press <Enter> when prompted to create/confirm the password. After you clear
the password, the Administrator Password item on top of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a user password:
1.
2.
3.
Select the User Password item and press <Enter>.
From the Create New Password box, key in a password, then press <Enter>.
Confirm the password when prompted.
To change a user password:
1.
2.
3.
4.
Select the User Password item and press <Enter>.
From the Enter Current Password box, key in the current password, then press <Enter>.
From the Create New Password box, key in a new password, then press <Enter>.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
2-12
Chapter 2: BIOS information
2.4
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Exit
EFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
[X.M.P.] When XMP is enabled BCLK
frequency, CPU ratio and memory
parameters will be auto optimized.
Target CPU Turbo-Mode Speed : 2600MHz
Target DRAM Speed: 1333Mhz
Memory Frequency
Auto
iGPU Max. Frequency
Auto
>
>
>
GPU Boost
DRAM Timing Control
CPU Power Management
CPU Voltage
Auto
→←: Select Screen
↑↓: Select Item
Enter: Select
iGPU Offset Voltage
DRAM Voltage
VCCSA Voltage
PCH Voltage
Auto
Auto
Auto
1.500V
0.925V
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
Auto
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
ASUS P8H77-I
2-13
Target CPU Turbo-Mode Speed : xxxxMHz
Displays the current CPU Turbo-Mode speed.
Target DRAM Speed : xxxxMHz
Displays the current DRAM speed.
2.4.1
Memory Frequency [Auto]
Allows you to set the memory operating frequency. Configuration options: [Auto] [DDR3-
1066MHz] [DDR3-1333MHz] [DDR3-1600MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
2.4.2
iGPU Max. Frequency [xxx]
Allows you to set the iGPU maximum frequency. The values range from xxxxMHz (by CPU)
to 3000MHz with a 50MHz interval. Use <+>/<-> to adjust the value.
2.4.3
[OK]
GPU Boost [OK]
Select [OK] to automatically optimize the iGPU frequency.
Select [Cancel] to use a fixed iGPU frequency.
[Cancel]
2.4.4
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.4.5
CPU Power Management
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and <-> keys or
the numeric keypad to adjust the value. The valid value ranges vary according to your CPU
model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).
[Disabled]
[Enabled]
Disables this function.
The operating system dynamically adjusts the processor voltage and
core frequency which may result in decreased average consumption and
decreased average heat production.
Turbo Mode [Enabled]
This item appears only when you set the previous item to [Enabled].
[Enabled]
Allows processor cores to run faster than marked frequency in specific
conditions.
[Disabled]
Disables this function.
2-14
Chapter 2: BIOS information
The following three items appear only when you set both the Enhanced Intel SpeedStep
Technology and Turbo Mode items to [Enabled].
Long duration power limit [Auto]
The default setting of this item will be TDP (65W or 95W for different CPUs). For Sandy
Bridge, Turbo Ratio can be kept a time duration exceed TDP for maximum performance. Any
under 255 can be programmed. Use the <+> and <-> keys to adjust the value.
Long duration maintained [Auto]
This value can vary from 1 to 32, which indicates the time window for Turbo Ratio over TDP
should be maintained. Use the <+> and <-> keys to adjust the value.
Short duration power limit [Auto]
This is the second power limit to provide rapid protection when package power exceeds
Power Limit 1. Default setting is 1.25 times Power Limit 1. For Intel recommend, platform
must be capable of supporting over Power Limit 2 for up to 10 msec. ASUS board can
support over Power Limit 2 for a long duration. Use the <+> and <-> keys to adjust the value.
Primary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for CPU cores. The value is
represented in 1/8 A (0.125A) increment. Use the <+> and <-> keys to adjust the value.
Secondary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for internal graphics cores. The
value is represented in 1/8 A (0.125A) increment. Use the <+> and <-> keys to adjust the
value.
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press <Enter>. You can also use the <+> and <-> keys to adjust the value. To
restore the default setting, type [auto] using the keyboard and press <Enter>.
2.4.6
CPU Voltage [Auto]
Allows you to set the CPU voltage. Configuration options: [Auto] [+0.05V] [+0.10V] [+0.15V].
2.4.7
iGPU Offset Voltage [Auto]
Allows you to set the iGPU Offset voltage. The value ranges from 0.005V to 0.635V with a
0.005V interval.
2.4.8
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.185V to 2.135V with a 0.005V
interval.
According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may damage
the CPU permanently. We recommend you install the DIMMs with the voltage requirement
below 1.65V.
ASUS P8H77-I
2-15
2.4.9
VCCSA Voltage [Auto]
Allows you to set the VCCIO voltage. The value ranges from 0.800V to 1.000V with a 0.005V
interval.
•
•
The values of the iGPU Offset Voltage, DRAM Voltage, VCCSA Voltage are labeled in
different color, indicating the risk levels of high voltage settings.
The system may need better cooling system to work stably under high voltage settings.
2.4.10
PCH Voltage [Auto]
Allows you to set the Platform Controller Hub voltage. Use <+> and <-> keys to adjust the
value. Configuration options: [Auto] [+0.05V] [+0.10V] [+0.15V].
2.5
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
Exit
EFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Trusted Computing (TPM) settings
>
>
>
CPU Configuration
PCH Configuration
SATA Configuration
>
System Agent Configuration
USB Configuration
Onboard Devices Configuration
APM
>
>
>
>
Network Stack
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
2-16
Chapter 2: BIOS information
2.5.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
The items shown in submenu may be different due to the CPU you installed.
Intel Adaptive Thermal Monitor [Enabled]
[Enabled]
[Disabled]
Enables the overheated CPU to throttle its clock speed to cool down.
Disables the CPU thermal monitor function.
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2] [3]
Limit CPUID Maximum [Disabled]
[Enabled]
Allows legacy operating systems to boot even without support for CPUs
with extended CPUID functions.
[Disabled]
Disables this function.
Execute Disable Bit [Enabled]
[Enabled]
[Disabled]
Enables the No-Execution Page Protection Technology.
Forces the XD feature flag to always return to zero (0).
Intel® Virtualization Technology [Disabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Hardware Prefetcher [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
Adjacent Cache Line Prefetch [Enabled]
[Enabled]
[Disabled]
Allows a hardware platform to perform adjacent cache line prefetching.
Disables this function.
CPU Power Management Configuration
CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use <+>
and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
Enhanced Intel SpeedStep Technology [Enabled]
Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST).
[Disabled]
[Enabled]
The CPU runs at its default speed.
The operating system controls the CPU speed.
ASUS P8H77-I
2-17
Turbo Mode [Enabled]
Allows you to enable or disable the Intel® Turbo Mode Technology.
[Enabled]
[Disabled]
Allows processor cores to run faster than marked frequency in specific
condition.
Disables this function.
CPU C1E [Auto]
Allows you to enable or disable the CPU C1E.
[Auto]
Set this item automatically.
[Enabled]
Enables the C1E support function. This item should be enabled in order to
enable the Enhanced Halt State.
[Disabled]
Disables this function.
CPU C3 Report [Auto]
Allows you to disable or enable the CPU C3 report to OS.
[Auto]
Set this item automatically.
[Enabled]
Enables the C3 report function. This item should be enabled in order to
enable the Enhanced Halt State.
[Disabled]
Disables this function.
CPU C6 Report [Auto]
Allows you to disable or enable the CPU C6 report to OS.
[Auto]
Set this item automatically.
[Enabled]
Enables the C6 report function. This item should be enabled in order to
enable the Enhanced Halt State.
[Disabled]
Disables this function.
2.5.2
PCH Configuration
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer. Configuration options:
[Enabled] [Disabled]
Intel(R) Rapid Start Technology
Intel(R) Rapid Start Technology [Disabled]
Allows you to enable or disable the Intel(R) Rapid Start Technology.
Configuration options: [Enabled] [Disabled]
Intel(R) Smart Connect Technology
ISCT Configuration [Disabled]
Allows you to enable or disable the ISCT configuration. Configuration options: [Enabled]
[Disabled]
2.5.3
SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
2-18
Chapter 2: BIOS information
SATA Mode Selection [IDE]
Allows you to set the SATA configuration.
[IDE]
Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI]
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
[RAID]
Set to [RAID] when you want to create a RAID configuration from the SATA
hard disk drives.
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
This item only appears when you set the SATA Mode Selection item to [AHCI] or [RAID]
and allows you to enable or disable the hot-plug support for each SATA port. Configuration
options: [Enabled] [Disabled]
2.5.4
System Agent Configuration
Memory Remap Feature [Enabled]
Enables or disables the memory remap feature. Configuration options: [Enabled] [Disabled]
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device. Configuration
options: [Auto] [iGPU] [PCIE]
iGPU Memory [64M]
Allows you to set the iGPU memory size. Configuration options: [32M] [64M] [96M] [128M] ~ [448M]
[480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable or disable Render Standby by internal graphics devices. Configuration
options: [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable or disable the Lucid Virtu support for both the integrated and discrete
graphics. The iGPU shared memory size will be fixed at 64MB. Configuration options: [Disabled]
[Enabled]
NB PCIe Configuration
PCIE X16_1 [Auto]
Allows you to set the PCIE x16_1 slot link speed. Configuration options: [Auto] [Gen1] [Gen2]
[Gen3]
ASUS P8H77-I
2-19
2.5.5
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Enables the support for USB devices on legacy operating systems (OS).
The USB devices can be used only for the BIOS setup program.
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]
This item appears only when you set the previous item to [Enabled] or [Auto].
[Enabled]
Enables the support for USB 3.0 devices on legacy operating systems
(OS).
[Disabled]
Disables the function.
Intel xHCI Mode [Smart Auto]
Allows you to select an operation mode for the Intel xHCI controller. Configuration options:
[Smart Auto] [Auto] [Enabled] [Disabled]
EHCI Hand-off [Disabled]
[Enabled]
Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled]
Disables the function.
2.5.6
Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
[Disabled]
Enables the High Definition Audio Controller.
Disables the controller.
The following two items appear only when you set the HD Audio Controller item to
[Enabled].
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-
definition audio depending on the audio standard that the front panel audio module supports.
[HD]
Sets the front panel audio connector (AAFP) mode to high definition audio.
Sets the front panel audio connector (AAFP) mode to legacy AC’97
[AC97]
Realtek LAN Controller [Enabled]
[Enabled]
[Disabled]
Enables the Realtek LAN controller.
Disables the controller.
2-20
Chapter 2: BIOS information
Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you
to enable or disable the PXE OptionRom of the Realtek LAN controller.
Configuration options: [Enabled] [Disabled]
2.5.7
APM
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
[Power Key]
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
[Enabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
2.5.8
Network Stack
Network Stack [Disable Link]
Enables or disables the network stack (Pxe and UEFI). Configuration options: [Disable Link]
[Enable]
ASUS P8H77-I
2-21
2.6
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Exit
EFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
CPU Temperature
CPU Temperature
MB Temperature
CPU Fan Speed
+34ºC / +93ºF
+31ºC / +87ºF
1717 RPM
N/A
Chassis Fan Speed
CPU Q-Fan Control
Enabled
CPU Fan Speed Low Limit
CPU Fan Profile
600 RPM
Standard
Enabled
Chassis Q-Fan Control
Chassis Fan Speed Low Limit
Chassis Fan Profile
CPU Voltage
600 RPM
Standard
+1.186 V
+3.312 V
+5.080 V
+12.192 V
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
3.3V Voltage
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
5V Voltage
12V Voltage
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Scroll down to display the following items:
F10: Save ESC: Exit
F12: Print Screen
Anti Surge Support
Enabled
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
2-22
Chapter 2: BIOS information
2.6.1
CPU Temperature / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignore if you do not wish to display the detected temperatures.
2.6.2
CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignore if you do not wish to display the detected speed.
2.6.3
CPU Q-Fan Control [Enabled]
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control feature.
[Disabled]
[Enabled]
CPU Fan Speed Low Limit [200 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
disable or set the CPU fan warning speed.
Configuration options: [Ignore] [100 RPM] [200 RPM] [300 RPM] [400 RPM] [500 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the
appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent]
[Turbo]
[Manual]
Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
Sets to [Turbo] to achieve maximum CPU fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Fan Profile to [Manual].
CPU Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range
from 20ºC to 75ºC.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from
20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at
the maximum duty cycle.
CPU Lower Temperature [20]
Use the <+> and <-> keys to adjust the lower limit of the CPU temperature. The values range
from 20ºC to 75ºC.
CPU Fan Min. Duty Cycle(%) [20]
Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 0%
to 100%. When the CPU temperature is under 40ºC, the CPU fan will operate at the minimum
duty cycle.
ASUS P8H77-I
2-23
2.6.4
Chassis Q-Fan Control [Enabled]
Disables the Chassis Q-Fan control feature.
Enables the Chassis Q-Fan control feature.
[Disabled]
[Enabled]
Chassis Fan Speed Low Limit [600 RPM]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you
to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you to set
the appropriate performance level of the chassis fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
[Silent]
[Turbo]
[Manual]
Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
Sets to [Turbo] to achieve maximum chassis fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set Chassis Fan Profile to [Manual].
Chassis Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range
from 40ºC to 90ºC.
Chassis Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum chassis fan duty cycle. The values range
from 60% to 100%. When the chassis temperature reaches the upper limit, the chassis fan will
operate at the maximum duty cycle.
Chassis Lower Temperature [40]
Displays the lower limit of the chassis temperature.
CPU Fan Min. Duty Cycle(%) [60]
Use the <+> and <-> keys to adjust the minimum chassis fan duty cycle. The values range from
60% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the
minimum duty cycle.
2.6.5
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.
2.6.6
Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function.
Configuration options: [Disabled] [Enabled]
2-24
Chapter 2: BIOS information
2.7
Boot menu
The Boot menu items allow you to change the system boot options.
Exit
EFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Select the keyboard NumLock state
Bootup NumLock State
Full Screen Logo
On
Enabled
Enabled
Wait for ‘F1’ If Error
Option ROM Messages
Setup Mode
Force BIOS
EZ Mode
UEFI/Legacy Boot
Enable bot...
Boot Option Priorities
Boot Override
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
2.7.1
Bootup NumLock State [On]
[On]
[Off]
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
2.7.2
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Post Report [5 sec]
This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to
set the waiting time for the system to display the post report. Configuration options: [1 sec] [2
sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]
2.7.3
Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
ASUS P8H77-I
2-25
2.7.4
Option ROM Messages [Force BIOS]
[Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
2.7.5
Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
program.
[EZ Mode]
Sets EZ Mode as the default screen for entering the BIOS setup program.
2.7.6
UEFI/Legacy Boot [Enabled both UEFI and Legacy]
Enables or disables boot from the UEFI or Legacy devices. Configuration options: [Enable
both UEFI and legacy] [Disable UEFI] [Disable Legacy]
2.7.7
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
•
•
To select the boot device during system startup, press <F8> when ASUS Logo appears.
To access Windows OS in Safe Mode, press <F8> after POST.
2.7.8
Boot Override
These items displays the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system. Click an item to start
booting from the selected device.
2-26
Chapter 2: BIOS information
2.8
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
Exit
EFI BIOS Utility - Advanced Mode
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Be used to update BIOS
>
>
>
ASUS EZ Flash 2 Utility
ASUS O.C. Profile
ASUS SPD Information
2.8.1
ASUS EZ Flash 2 Utility
Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
For more details, see section 2.1.2 ASUS EZ Flash 2.
2.8.2
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
The Setup Profile Status items show Not Installed if no profile is created.
Label
Allows you to input the label of the setup profile.
Save to Profile
Allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a
profile number from one to eight, press <Enter>, and then select Yes.
Load from Profile
Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile
number that saved your CMOS settings, press <Enter>, and then select Yes.
•
DO NOT shut down or reset the system while updating the BIOS to prevent the system
boot failure!
•
We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
2.8.3
ASUS SPD Information
DIMM Slot # [Slot 1]
Displays the Serial Presence Detect (SPD) information of the DIMM module installed on the
selected slot. Configuration options: [Slot 1] [Slot 2]
ASUS P8H77-I
2-27
2.9
Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit
menu.
Exit
Load Optimized Defaults
Save Changes & Reset
Discard Changes & Exit
ASUS EZ Mode
Launch EFI Shell from filesystem device
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Yes to load the default values.
Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved. When you select this option or if you press <F10>,
a confirmation window appears. Select Yes to save changes and exit.
Discard Changes & Exit
This option allows you to exit the Setup program without saving your changes. When you
select this option or if you press <Esc>, a confirmation window appears. Select Yes to
discard changes and exit.
ASUS EZ Mode
This option allows you to enter the EZ Mode screen.
Launch EFI Shell from filesystem device
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of
the available devices that have a filesystem.
2-28
Chapter 2: BIOS information
Appendices
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference.
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS
210 of Industry Canada. This Class B device meets all the requirements of the Canadian
interference-causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer
un fonctionnement non souhaité de l’appareil.
ASUS P8H77-I
A-1
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly
recycle our products, batteries, other components as well as the packaging materials. Please
regions.
A-2
Appendices
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone
Fax
E-mail
Web site
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798
Technical Support
Telephone
+86-21-38429911
Online support
support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
800 Corporate Way, Fremont, CA 94539, USA
+1-812-282-3777
+1-510-608-4555
usa.asus.com
Web site
Technical Support
Telephone
Support fax
+1-812-282-2787
+1-812-284-0883
support.asus.com
Online support
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959911
Web site
Online contact
Technical Support
Telephone
Support Fax
+49-1805-010923*
+49-2102-9599-11
support.asus.com
Online support
* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
ASUS P8H77-I
A-3
A-4
Appendices
|