AT STEREO COLOR TELEVISIONS
INSTRUCTION MANUAL
Standard - AT2408S, AT2708S
Please read this manual carefully before operation.
01
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or third prong is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15.Warning - This TV should only be serviced by an authorized and properly trained technician.
Opening the cover or other attempts by the user to service this TV may result in serious injury
or death from electrical shock, and may increase the risk of fire.
IMPORTANT STAND AND BASE SAFETY INFORMATION
Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and
strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause
personal injury and/or damage the TV. Refer to the Important Safety Instructions above.
FCC Warning
Class B Computing Device
Information to User
This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant
to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. lf this equipment receives interference while off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) lncrease the separation between the equipment and TV.
3) Connect the equipment into an outlet on a circuit different from that to which the TV is connected.
4) Consult the dealer or an experienced radio/TV technician for help and for additional suggestions.
The user may find the following booklet prepared by the Federal Communications Commission helpful:
"How to Identify and Resolve Radio - TV Interference Problems". This booklet is available from the US
Government Printing Office. Washington, D.C. 20402, Stock No. 004-000-00345-4.
FCC Warning
The user is cautioned that changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
NOTE: In order for an installation of the product to maintain compliance with the limits for a Class B
Device, shielded cables must be used.
2
Instruction Manual
TABLE OF CONTENTS
INTRODUCTION
Safety Instructions ..............................................................................................................................................1
Specifications......................................................................................................................................................3
Feature Descriptions ..........................................................................................................................................4
Front and Rear Unit Profiles ..............................................................................................................................5
Remote Control Features ..................................................................................................................................6
INSTALLATION
Connecting the Antenna ....................................................................................................................................7
Installing the Remote Control Batteries..............................................................................................................7
Connecting A/V Equipment
Input from Device to TV ..............................................................................................................................8
Output from TV to Device ............................................................................................................................8
FUNCTIONS & FEATURES
Turn On/Off ........................................................................................................................................................9
Basic Functions
Changing the Channel ................................................................................................................................9
Adjusting the Volume ..................................................................................................................................9
Muting the Volume ......................................................................................................................................9
Function Selection Menus
Picture Menu................................................................................................................................................9
Audio Menu ..................................................................................................................................................9
Tuner Menu ................................................................................................................................................10
Timer Menu ................................................................................................................................................10
System Menu
On Screen Display Language Select ..................................................................................................10
Blue Background ................................................................................................................................10
Closed Caption....................................................................................................................................10
Parental Guide ....................................................................................................................................11
Useful Remote Control Features......................................................................................................................12
TROUBLESHOOTING GUIDE.................................................................................................................................13
LIMITED UNITED STATES WARRANTY ................................................................................................................14
SPECIFICATIONS
MODEL
AT2408S
AT2708S
NTSC-M
Television System
Channel Coverage
Cable TV Coverage
NTSC-M
VHF 2-13, UHF 14~69
VHF 2-13, UHF 14~69
Mid Band (A-8~A-1, A~I);
Super Band (J~W)
Mid Band (A-8~A-1, A~I);
Super Band (J~W)
Hyper Band (AA~ZZ, AAA, BBB) Hyper Band (AA~ZZ, AAA, BBB)
Ultra Band (65~94, 100~125)
Ultra Band (65~94, 100~125)
Channels Preset
Antenna Input
181
181
75 ohm (unbalanced)
75 ohm (unbalanced)
Screen Dimensions
18.8 x 14.3 in
478 x 363 mm
21.3 x 15.9 in
540 x 405 mm
Audio Output
5W + 5W
<7%
5W + 5W
<7%
Total Harmonic Distortion
Power Source
~120Vac 60Hz
69 lbs. (31.5 kg)
~120Vac 60Hz
88 lbs. (40 kg)
Unit Weight
Unit Dimensions
26.0 x 20.6 x 18.0 in
660 x 522 x 458 mm
29.5 x 23.2 x 18.7 in.
750 x 589 x 474 mm
Packaged Dimensions
Power Consumption
29.1 x 24.0 x 21.5 in
740 x 610 x 545 mm
33.5 x 27.2 x 22.8 in.
852 x 692 x 580 mm
125W
135W
3
Instruction Manual
Feature Descriptions
181 Channel Tuner - total number of channels the TV can receive: 2-69 in Air mode, or 1-125 in Cable
mode
AV Input (Rear) - input designed for use with A/V devices, such as a VCR or DVD player
AV Input (Front) - input designed for infrequent use, such as with a camcorder or video game unit
AV Output (Rear) - output signals from TV to devices such as a VCR
AV Stereo Sound - stereo sound for superior TV viewing experience
Channel Recall - instant return to the last channel viewed
Closed Caption Display - feature that displays the closed captions or text of a TV broadcast
Remote Control - A wireless remote control unit for the TV
On/Off Timer - feature that allows the user to set a timer to turn on/off the TV
Parental Control - feature that allow parents to block out selected type of programming
RF IN Jack - standard coaxial antenna jack
S-Video Input - input designed for greater clarity and sharpness; also known as S-VHS
Screen Size - the diagonal size of the TV screen
Selectable Picture Modes - preset standards for TV display: Memory, Theater and Normal
Selectable Sound Modes - preset standards for TV sound: Memory, Speech, Music and Theater
Trilingual On Screen Display (OSD) - TV's on screen display, can be either English, French or Spanish
FEATURE
AT2408S
AT2708S
●
●
181 Channel Tuner
AV Input (Rear)
AV Input (Front)
AV Input (Side)
AV Output (Rear)
Channel Recall
Closed Captions
Full Feature Remote
On/Off Timer
3
-
3
1
-
-
1
●
●
●
●
1
●
●
●
●
●
●
Parental Control
RF IN Jack
●
●
S-Video Input
1
1
Screen Size
24”
●
●
●
27”
●
Picture Modes
Trilingual OSD
Sound Modes
●
●
PACKING LIST
Parts
QTY
Color TV Receiver
Remote Control
1
1
1
2
Operation Manual
AAA Alkaline Batteries
4
Instruction Manual
Front and Rear Unit Profiles
Front panel
AT2708S
AT2408S
STANDBY
INFRARED SENSOR
POWER INDICATOR
AT2408S
MENU SELECT
TV/VIDEO SELECT
CHANNEL DOWN/UP
VOLUME DOWN/UP
AT2708S
MENU SELECT
VOLUME DOWN/UP
TV/VIDEO SELECT
FRONT A/V INPUT
CHANNEL DOWN/UP
Rear panel
5
Instruction Manual
Remote Control Features
FUNCTION
KEYPAD
100+
Used for volume control and child lock
Used to select channels by number
Three digit select
FUNCTION
KEYPAD
STANDBY
TIMER
Accesses the Timer menu
ARROWS
SCAN
Used to navigate the TV menus
Scans all the active channels
Selects the various Picture Modes
Selects the various Sound Modes
Returns to the last channel viewed
Activates Closed Captioning
Turns on/off the TV
CH + / -
PICTURE
SOUND
RECALL
CC
100+
VOL + / -
TIMER
DISPLAY
MENU
ARROWS
SCAN
STEREO
MUTE
PICTURE
STANDBY
CH + / -
VOL + / -
DISPLAY
MENU
SOUND
RECALL
CC
VIDEO
Used to change the current channel
Used to adjust the volume level
Brings up the TV/Video display
Brings up the main Menu
STEREO
MUTE
Selects the Stereo modes among On/L/R
Mutes or restores the TV volume
Cycles through the Video/TV modes
VIDEO
6
Instruction Manual
INSTALLATION
- Please read the safety instructions in this manual completely before installation.
- Install your TV in an area where direct sunlight will not fall upon the screen.
- Soft, indirect light is best for television viewing.
- Allow enough space (at least 4 in.) between the TV and any walls or enclosures for proper ventilation.
- Optimum television viewing distance is 3-5 times the screen's size.
Auto-Degaussing
Color television can be easily affected by magnetism, which shows as color distortion on the screen. If your TV is
affected by nearby magnetic components or appliances, turn it off for a few minutes. The built-in auto-degaussing
circuit will eliminate the magnetic interference.
Auto off when no signal received
The TV set will automatically enter into Standby mode when the following conditions are met.
1.TV is in antenna mode.
2.Current channel has no signal.
3.No key is pressed within 15 minutes.
Connecting the Antenna
75-ohm coaxial cable (not supplied)
OR
VHF
UHF
or Cable
300-ohm twin-lead cable (not supplied)
Antenna adapter
(not supplied)
VHF
RF Input
(back of TV unit)
OR
U/V mixer
(not supplied)
UHF
Notes:
1. It is recommended that a 75 ohm coaxial cable be used in order to
eliminate interference and noise which may occur due to nearby radio
transmissions.
2. The antenna cable should not be tied together with other wiring.
3. Set up a lightning rod and check it regularly when an outdoor antenna
is used.
Installing the Remote Conrol Batteries
1. Remove the battery compartment lid.
2. Insert two AAA batteries (included). Make sure the positive (+) and
negative (-) polarities are correctly aligned.
3. Reattach the battery lid.
Notes:
1. Alkaline batteries are recommended for longer life.
2. Always replace both batteries at the same time.
3. Do not expose batteries to fire or break them open.
4.To avoid battery leakage, remove batteries from the remote control
when it is not being used for a long period of time.
7
Instruction Manual
INSTALLATION (continued)
Connecting A/V Equipment
The following are diagrams showing basic instructions for attaching external equipment, like a VCR or
DVD player, to your TV set. Please refer to operation manuals of external audio/video equipment that
will be connected to your set for additional instructions. PLEASE TURN OFF ALL POWER BEFORE
CONNECTING DEVICES TOGETHER.
Connect VCR's RF OUT terminal to the RF IN jack located on the real panel of the TV.
Coaxial Cable
RF IN
VCR
Input from Device to TV
AUDIO/VIDEO OUT
DO NOT connect both composite (yellow video terminal) and S-Video terminal. Use only
one of the two. Also, remember to connect the audio cables when using S-Video.
DVD Player
With S - VIDEO Terminal
OR
The front terminals may be
easier to use with a camcorder.
The connections are identical.
VIDEO
ow
Yellow
stScriptPicture
Red
Red
sxj
White
White
Camcorder
VCR
Output from TV to Device
VIDEO
Yellow
Yellow
AUDIO/VIDEO IN
Red
Red
White
White
VCR
8
Instruction Manual
FUNCTIONS & FEATURES
Turn On/Off
1. Turn On
Plug in the power cord, and the TV should enter into Standby mode and its power indicator should light.
Pressing STANDBY or the CH+/- key will turn on the TV and the power indicator will turn off.
2. Standby (Soft Off)
While the TV is on, press the STANDBY key will put the TV in Standby mode.
Basic Functions
Changing the Channel
While in Tuner mode, press the CH +/ - keys to change the channel, or use the numeric keypad to enter a
new channel.
Adjusting the Volume
To adjust the volume, press the VOL +/ - keys. Also, you may press the FUNCTION (F) key along with the
VOL +/ - keys to adjust the volume in increments or decrements of 4.
Muting the Volume
To mute the volume, press the MUTE key. To restore the volume, press MUTE again or press the VOL + key.
Function Selection Menus
To change the setting of any function, press the MENU key to bring up the main menu. Press the up or down
arrow key to highlight the desired sub-menu and press the left or right arrow key to access. While in the sub-
menu, use the up or down arrow key to select the item and the left or right arrow to adjust the setting. Press
the MENU key to return to the main menu and exit.
While in the setup menu, CH-/+ and VOL-/+ keys on the front panel will function as the down/up/left/right
arrow keys on the remote control.
Picture Menu
Features
Picture
This menu allows you to adjust the various picture settings. Use the
up or down arrow key to move between the various settings, and the
left or right arrow key to adjust them.
Tint
00
31
31
31
31
Brightness
Contrast
Color
Tint:
-31 (more greenish) to +31 (more purplish)
Brightness: 0 (dimmest) to 63 (brightest)
Sharp
Contrast:
Color:
0 (minimum contrast) to 63 (maximum contrast)
0 (minimum color) to 63 (maximum color)
Sharp:
0 (minimum sharpness) to 63 (maximum sharpness)
Audio Menu
Features
Audio
This menu allows you to adjust the various audio settings. Use the
up or down arrow key to move between the various settings, and the
left or right arrow key to adjust them.
Bass
Treble
31
31
00
Balance
Surround
Bass:
Treble:
Balance:
Surround:
0 (less Bass) to 63 (more Bass)
Low
0 (less Treble) to 63 (more Treble)
L31 (Left Dominance) to R31 (Right Dominance)
Off; Low (slight surround effect); High (marked
surround effect)
9
Instruction Manual
FUNCTIONS & FEATURES (continued)
Tuner Menu
Note: This menu is only accessible while the TV is in Tuner mode.
Tuner
Channel: This feature allows you to change the channel displaying on
screen. Use the left or right arrow key or the numeric keypad to change
the channel.
Channel
Add/Erase
Antenna
2
Add
Air
Add/Erase: This feature allows you to add or remove the channel
currently display on screen to the "active channel list" . Active channel list
is the list of channel that is available by pressing the CH+/- keys. Use the
left or right arrow key to add or erase.
Auto Program
Stop
Start
Antenna: This feature sets the TV tuner to an Air antenna or a Cable
antenna. Please use Air mode when using an over-the-air antenna; use
Cable mode for a cable hookup. Use the left or right arrow key to select
between the two options.
Auto Program: This feature will setup the Active channel list for the user.
The list will include only the channels with a signal detected. Press the
right arrow key to begin and the left arrow key to stop the process.
Timer Menu
Press the TIMER key on the remote control to access this menu.
Timer
Time
Time
On Time
On Channel
Off Time
--:--
--:--
-
This feature allows you to set the clock on the TV.
On Time
This feature allows you to preset a time when the TV set will turn on.
--:--
On Channel
This feature allows you to preset the channel on display when the On
Time is activated.
Off Time
This feature allows you to preset a time when the TV set will turn off.
System Menu
Language
This feature allows you to pick a language used for the on screen display
(OSD). Use the left or right arrow key to select the language of your
choice - English (Eng.), French (Fra.) or Spanish (Esp.).
System
Language
Blue Back
Closed Captions
Parental Guide
Eng.
Fra. Esp.
On
CC1
On
Blue Background
This feature gives you the option to display a blue background on the TV
screen when there is no signal present. Use the left or right arrow key to
toggle between on and off.
MPAA - X
TV - MA
Closed Caption
Closed caption is a feature that allows your TV set to display, on screen,
the dialogue, narration, and sound effect of a TV program. It also allows
you to display teletext signal. Text and caption will be displayed at either
the top or the bottom of the screen. There is nine different setting for
closed caption. You can set it to one of the 4 Closed Caption settings
(CC1-4), one of the 4 Text settings (T1-4), or set this feature to off
(CCD/Text Off).
Notes: A Closed Caption signal may not be display under the following
conditions:
-When there is no Closed Caption/Text signal to decode
-When the signal is weak or altered (due to interference or poor
reception)
-When viewing a dubbed video tape
10
Instruction Manual
FUNCTIONS & FEATURES (continued)
System Menu (continued)
Parental Guide
System
This feature allows parents to block certain programs from being
viewed, based on the programs' rating. In order to access this
menu, you must first enter a pass code. The factory default is 6688.
Enter the pass code while the Parental Guide is highlighted. Now,
with Parental Guide set as On, press the right arrow key to access
the TV Rating grid.
Eng.
Language
Blue Back
Fra. Esp.
On
CC1
Closed Captions
Parental Guide
On
MPAA-X
TV-MA
Enter Pass Code - - - -
TV Rating Grid
Using the up or down arrow key to navigate between the
ratings, press the MENU key to block out a particular rating
completely. Or, if you wish, press the down arrow key to
highlight an individual rating (anywhere a U is displayed in the
middle of the grid.) Pressing the MENU key with one of these
individual ratings highlighted will block only programs that
feature that particular aspect. See the TV rating diagram at
right for an example. TV ratings are defined in the charts
below:
TV Rating Grid
TV-Rating
Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
FV
U
D
L
S
V
U
U
U
U
B
U
B
U
B
B
U
B
B
U
B
B
Age
Defined as
Contents
Defined as
TV - Y
TV - Y7
TV - G
TV - PG
TV - 14
TV - MA
All Children
TV-MA B
FV
D
L
Fantasy Violence
Sexual Dialogue
Adult Language
Sexual Situations
Violence
Directed to Older Children (over 7)
General Audience
Age Based Rating
Parental Guidance Suggested
Parents Strongly Cautioned
Mature Audience Only
S
V
MPAA Rating Grid
MPAA Rating Grid
MPAA - Rating
Press the right arrow key while in the TV Rating grid to
access this grid. Use the up or down arrow key to navigate
between the MPAA ratings. Pressing the MENU key with a
rating highlighted will block that particular rating from being
shown on this TV. A B will show in red next to the blocked
rating. Please note that blocking a lower rating (for example,
PG) will block all higher ratings (PG-13, R, NC-17, X.)
Movie Rating
G
PG
U
U
PG-13 U
R
U
NC-17 U
X
U
Pass Code Menu
Age Based Rating
This menu allows you to change the access code for the
Parental Guide functions of the TV set. Press the MENU key
when Pass Code Control is highlighted. This will turn on or off
the Pass Code function. With the Pass Code function ON,
you can also change the Pass Code. Use the down arrow key
to highlight Pass Code, then enter the new Pass Code using
the numeric keypad.
Pass Code Menu Grid
Pass Code Menu
Pass Code Control
Pass Code 6688
Note: The factory default pass code of 6688 is also the
override code, in case you forget your new pass code.
Enter Pass Code - - - -
11
Instruction Manual
FUNCTIONS & FEATURES (continued)
Useful Remote Control Features
DISPLAY
This key allows you to display the current information of the TV screen on the upper right hand corner of the
screen. (channel, antenna mode, time, video, etc.)
TIMER
This key allows you to directly access the Timer menu. For an explanation of this menu features, please see
page 10.
SCAN
Press the SCAN key twice, and the TV will begin to scan through all active channels. To stop the Scan,
pressing any key can interrupt scanning. Please note that Scan will only work in Antenna mode.
PICTURE
Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate these picture
modes, press the PICTURE key, and you can choose among Memory, Theater and Normal.
SOUND
Press the SOUND key repeatedly, and you can choose among Memory, Speech, Music and Theater.
STEREO
In the Video mode, press the STEREO key to set Stereo to one of the R/L/On modes.
RECALL
This key will allow you to return to the last channel you were viewing. Pressing it again will return you to the
channel you just left.
CC
Pressing the CC key will activate the currently selected Closed Captions or Text under the System Menu.
Pressing it again will turn off the Closed Captions.
VIDEO
This key allows you to toggle between antenna and different video modes.
CHILD LOCK
The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F key, and
then press MUTE. You should see a key symbol appear on the screen. This will lock out all remote functions
(except for Standby). To unlock the TV, press and hold the F key and press MUTE. This will unlock the TV.
Please note that the only way to activate or deactivate the Child Lock feature is via remote control - please
insure that it is stored securely.
0-9/100+
Press the 0-9 and 100+ keys to enter channel numbers directly (2-69 in the Air mode or 1-125 in the Cable
mode).
1.To choose a one-digit channel number, press the 0 key, then press another Channel Number key to select
a desired number.
2.To choose a two-digit channel number, enter a first-digit and then a second digit.
3.To choose a three-digit channel number, press the 100+ key so that 1- - appears on the screen, then enter
the next digit one and two.
12
Instruction Manual
TROUBLESHOOTING GUIDE
Check the following guide for a possible correction to a problem before contacting customer service.
Symptoms
No power
Correction
Verify the power cables plug into an outlet with power.
Verify the connection from the DVD/VCR video output to the TV video input
is secure.Then switch TV to the appropriate Video mode.
No picture
Verify an antenna cable is securely connected to the RF in jack.
Connect the audio cables into the terminals securely.
Verify the connection from the DVD/VCR audio output to the TV audio input.
Then switch to the appropriate mode on the receiver. Refer to your audio
amplifier owner's manual.
No sound
Verify the volume is at an appropriate level and the mute feature is not on.
Verify the TV is set to Antenna mode.
Make sure the antenna is securely connected to the RF in jack.
Unplug the TV from the wall for 30 seconds, then plug in and try again.
Unplug the antenna connection from the back of the TV, unplug the TV from
the wall, wait 30 seconds, then try again.
No TV signal
Stripe or purple interfe-
rence appears in the
screen.
Verify the speakers around the TV set are shielded.
Verify the antenna lead wire is in working condition.
Picture becomes
snowy.
Verify the antenna is connected securely to the RF in jack.
Picture with multi-image
Move the antenna around to minimize multi-images.
Make sure the Air/Cable setting is correct.
TV channel not received
Channel may be locked with the block channel feature, such as Parental Control.
Check Add/Erase feature, as channel may have been erased during set up.
Black box appears on
screen.
Verify Closed Caption feature is off.
Remote control
doesn't operate.
Batteries may be weak. Replace batteries.
Make sure nothing is in between the remote and the remote sensor.
13
Instruction Manual
LIMITED UNITED STATES WARRANTY
(AT2408S, AT2708S)
Apex Digital, Inc. makes the following limited warranties. These limited warranties extend to the original consumer purchaser
or any person receiving this product as a gift from the original consumer purchaser and to no other purchaser or transferee.
Limited Ninety (90) Days Warranty
Apex Digital, Inc. warrants this product and its parts against defects in material or workmanship for a period of ninety (90)
days after the date of original retail purchase. During this period Apex Digital, Inc. will repair or replace a defective part or
product at their option, with a new or refurbished part or product, without charge to you.You must deliver the entire product
to an Authorized Apex Digital, Inc. Service Center. You are responsible for all packing, transportation and insurance charges
for the set to and from the Service Center.
Limited One (1) Year Warranty
Apex Digital, lnc. further warrants the parts in this product against defects in material or workmanship for a period of one
(1) year after the date of original retail purchase with exception of the remote control which is guaranteed for ninety (90)
days. During this period Apex Digital,Inc. will replace a defective part with a new or refurbished part without charge to you,
except that if a defective part is replaced after ninety (90) days from the date of original retail purchase, you are responsible
to pay all labor charges involved in the part(s) replacement. You must also deliver the entire product to an Apex Digital, Inc.
Authorized Service Center. You are responsible for all packing, transportation and insurance charges for the set to and from
the Service Center.
Rental Product
The warranty for a rental product begins with the original date of receipt by the rental firm.
Your Responsibility
The above warranties are subject to the following conditions:
• You must retain your bill of sale to provide proof of purchase.
• You must retain all packing materials for return shipment.
• All warranty service of this product must be made by an Authorized Apex Digital, Inc. Service Center.
• These warranties are effective only if the product is purchased and operated in the U.S.A.
• Labor service charges for set installation, setup, adjustment of customer controls and installation or repair of any type
of antenna or cable systems are not covered by this warranty. Reception problems caused by inadequate antenna or
cable system are your responsibility.
• Warranties extend only to defects in materials or workmanship as limited above and do not extend to any product
or parts which have been lost or discarded by you or damage to product or parts caused by misuse, accident,
damage caused by Acts of God, such as lightning or fluctuations in electrical power, improper installation,
improper maintenance or use in violation of instructions furnished by us; or to product which has been modified
or had the serial number removed, altered, defaced or rendered illegible.
How to Obtain Warranty Service
lf after following all the operating instructions in this manual and reading the TROUBLESHOOTING section you find that
service is necessary:
1. Contact our Customer Service Center directly call 866 4 APEXlNC (866 427 - 3946 ), Mon - Fri 8am - 5pm (Pacific Time).
2. After obtaining the requested information, you must present your receipt to the Authorized Service Center to obtain
warranty service.
3. You must deliver the entire product to the Authorized Service Center. You are responsible for all transportation for the
product to and from the Service Center.
Limitations
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose,
are expressly limited to the duration of the limited warranties as set forth above. With the exception of any warranties implied
by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees,
agreements and similar obligations of manufacturers or seller with respect to the repair or replacement of any parts. In no
event shall Apex Digital, Inc. be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in
any manner whatsoever. The time within which action must be commenced to enforce any obligation of Apex Digital, lnc.
arising under this warranty or under any stature, or law of the United States or any state thereof, is hereby limited to ninety
(90 ) days from the date you discover or should have discovered the defect. This limitation does not apply to implied
warranties arising under state law.
This warranty gives you specific rights and you may also have these rights which may vary from state to state. Some states
do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation
of incidental or consequential damages, so the above provisions may not apply to you.
14
APEX Digital, Inc.
2919 E. Philadelphia Avenue
Ontario, California 91761
909-930-1239
FOR SERVICE CALL: 866-4-APEX-INC
|