Safety Precautions
The lightning flash with an arrowhead symbol within an equilateral triangle is
WARNING
intended to alert the user to the presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
AVIS
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PART INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
!
DO NOT EXPOSETHIS APPLIANCETO RAIN OR MOISTURE, DUETOTHE HIGH RISK OF FIRE OR ELECTRIC
SHOCK. DO NOT OPENTHE CABINET DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDETHE
ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD ATTEMPTTHIS.
WARNING:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUGTO WIDE SLOT AND INSERT.
CAUTION:
ATTENTION:
CAUTION:
This Digital Video Disc Player employs a Laser System. To prevent direct exposure to the laser beam, do not try to
open. Visible laser radiation when open and interlocks defeated. Use of control adjustments or the performance of
procedures other than those specified may result in hazardous radiation exposure.
DO NOT STARE INTO BEAM.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should
the unit require maintenance, contact an authorized service location, or contact APEX Digital Inc. Only qualified service
personnel should remove the cover.
This equipment has been tested and found to comply with the limits for a Class B digital device. Pursuant with the FCC
Rules, Part 15. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
FCC
NOTICE:
This equipment generates, uses, and radiates radio frequency energy and used in accordance with the instructions,
may cause harmful interference to radio communication. However, this is no guarantee that interference will not occur in
a particular installation. The user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment, not expressly approved by APEX or parties authorized by APEX will
void all the manufacture warranties.
.
Since it’s usual for movies to be released at different times in different regions of the world, all players have region codes and
discs can have an optional region code. If you load a disc of a different region code, you will see the region code notice on
the screen. The disc will not play and should be unloaded immediately.
WARNING:
THE REGION CODE FOR THIS UNIT IS 1.
CLASS 1
LASER PRODUCT
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
1
Introduction
Your DVD video player is a player for digital video discs
conforming to the universal DVD video standard. With it, you will
be able to enjoy full-length movies with true cinema picture quality,
and multichannel sound. Unique features of this compact player
include an S-video output, selecting of sound track and subtitle
languages and of different camera angles (depending on the disc).
What’s more, Parental Control lets you decide which discs your
children can watch. Your player supports audio CD’s, video CD’s
and the new MP3 format.
You will find your player remarkably easy to use, by way of the
wireless remote control and on screen display you view from your
TV screen.
UNPACKING
When shipping the DVD video player, the original shipping carton and packing comes in handy. For
maximum protection, repack the unit as it was originally packed at the factory.
First check and identify the contents of your DVD video player package, as listed below:
- Remote control handset
- RCA cables (3) (1 yellow, 1 red, and 1 white)
- Owner’s manual
- Size AA batteries (2)
If any item should be damaged or missing, please inform your dealer without delay.
Keep the packaging materials, you may need them to transport your player in the future.
WHERE TO LOCATE YOUR DVD
A. Place the unit on a firm, flat surface.
B. When you place this DVD video player near a radio, or VCR, the playback picture may become poor
and/or distorted. In this situation, move the DVD video player away from the other units.
C. If placed in a cabinet, please allow at least 2.5 cm (1 inch) of free space all around the player for
proper ventilation.
TO OBTAIN A CLEAR PICTURE
The DVD video player is a precision device. If the optical pick-up lens and disc drive parts are dirty or worn
down, picture quality becomes poor. We recommend regular inspection and maintenance every 1,000 hours
of use depending on the operating environment.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
3
Notes on Discs
HOW TO HANDLE, CLEAN, AND STORE DISCS.
HANDLING DISCS
• Do not touch the playback side of the disc.
• Do not attach paper or tape to discs.
NOTE: Apex Digital Inc. shall not be responsible for damage that may
occur to a disc from being operated in the player.
CLEANING DISCS
• Fingerprints and dirt on the disc cause picture and sound deterioration. Wipe
the disc from the center outward with a soft cloth. Always keep the disc clean.
• If you cannot wipe off the dirt off, wipe the disc lightly with a slightly moistened
soft cloth and finish with a dry cloth.
• Do not use any type of solvent such as a thinner, benzine, commercially
available cleaners or anti-static spray for vinyl LP’s.
STORING DISCS
• Do not store discs in places subject to direct sunlight or near heat sources.
• Do not store discs in places subject to moisture and dust.
• Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.
NOTES ON REGIONAL NUMBERS
PLAYABLE DISCS
This DVD video player will play region 1 discs or region 1
on an all-region disc only. Region 1 is the designated area
for the U.S. and Canada. Otherwise playback will not be
allowed by the player due to Macrovision copyright
protection.
This DVD video player can play back the following discs.
Disk Mark
Contains
Disc Size
Maximum playback time
Approx. 4 hours
(single sided disc)
Audio
+
Video
(moving
pictures)
DVD
video
disc
TYPE OF TV SYSTEM
12 cm
Connect this DVD video player to a TV compatible with the
NTSC or PAL/3.58 system. APEX DIGITAL players will play
VCD format discs. Most VCD’s are PAL. VCD’s are not
region specific (no code) and APEX DIGITAL players can
play them because of the PAL compatibility feature.
Approx. 8 hours
(double sided disc)
Audio
+
Video
(moving
pictures)
Approx. 74 minutes
Approx. 20 minutes
12 cm
8 cm
Video
CD
Approx. 74 minutes
Approx. 20 minutes
12 cm
Audio
CD
Audio
Audio
8 cm
(CD single)
MP3
CD
Approx. 600+ minutes
MP3
12 cm
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
4
Table of Contents
Safety Precautions ........................... 1
Important Safety Instructions ........... 2
Introduction ........................................ 3
Notes On Discs................................... 4
Identification of Controls .................... 6
Remote Control.....................................7 - 8
Connecting to a TV ............................ 9
Zooming a Picture/ Vocal Assist ...........24
Selecting the Camera Angle/Language/
Audio Settings ..................................... 25
Playing in a Favorite Order.................. 26
Selecting Subtitles ............................. 27
Using the On-screen Display ............ 28
Setting the Parental Lock ................... 29
Customizing the Function Settings .... 30
Memo On Output Sounds & PBC ....... 31
Specifications ..................................... 32
Troubleshooting Guide......................... 33
Limited Warranty ................................ 34
Connecting to a TV using a RF Modulator
..............................................................10 - 11
Connecting Optional Equipment............12 - 13
What is MP3 and VCD ?........................14
MP3 Operation......................................15
Playing Back a Disc..............................16 - 19
Locating a Specific Title,
Chapter or Track...................................20 - 21
Playing Repeatedly...............................22
Playing in Random Order......................23
A
P
E
X
D
I
G
I
T
A
L
5
Identification of Controls
FRONT PANEL
2
1
3
6
4
5
1
2
3
POWER ON/OFF
4
5
6
PLAY
DVD TRAY
PAUSE
STOP
OPEN/CLOSE
REAR PANEL
1 3 5
7
6
4
2
1
2
3
4
5
6
DIGITAL AUDIO-COAXIAL OUTPUT
S-VIDEO OUTPUT
COMPOSITE VIDEO OUTPUT 1
COMPOSITE VIDEO OUTPUT 2
ANALOG AUDIO OUTPUT L
ANALOG AUDIO OUTPUT R
POWER CORD
7
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
6
Remote Control
THE INSTRUCTIONS IN THIS MANUAL DESCRIBE
THE FUNCTIONS ON THE REMOTE CONTROL.
18. REPEAT (PAGE 20)
19. A-B RPT (PAGE 20)
20. MUTE (PAGE 7)
21. GOTO (PAGE 19)
22. CLEAR (PAGE 24)
23. DISPLAY (PAGE 26)
24. PBC OFF
1. POWER (PAGE 7, 14)
2. NUMBER KEYS (PGS.19, 27)
3. SHUFFLE (PAGE 21)
4. PROGRAM (PAGE 24)
5. VOCAL ASSIST (PAGE 22)
6. RESUME (PAGE 7)
16
1
17
2
18
19
20
7. SLOW (PAGE 17)
21
22
3
8. STEP (PAGE 16)
4
(12, 19, 21, 24)
5
6
23
24
9. SETUP (9-11, 19, 27, 28)
10. AUDIO (PAGE 23)
25. ZOOM (PAGE 22)
26. P/N (PAGE 7)
7
25
26
8
11. MENU (PAGE 7)
9
27
28
27. ANGLE (PAGE 23)
28. SUB-T (PAGE 25)
29. TITLE (PAGE 18)
30. STOP (PGS.13,
15, 17, 27-28)
10
12. DIRECTION KEYS (13, 15,
19, 22, 27, 28)
29
11
12
13
13. ENTER/PLAY (13-19, 21, 24,27, 28)
14. PAUSE (PAGES 15-16)
15. SKIP FORWARD/ BACK
(13, 18-19, 21)
14
30
31. FORWARD SCAN
(PAGES 13, 16)
31
32
16. OPEN/CLOSE (PAGES 14-15)
32. REVERSE SCAN
(PAGES 13, 16)
15
17. VOLUME UP / DOWN (PAGE 7)
NOTES:
• POWER button on the remote control is for standby power only. Turn the
main power button on the dvd player.
• P/N button for PAL/NTSC. Standard TV system used in N. America is
NTSC. If a PAL region 1 VCD or DVD disc is played, press P/N for normal
playback. Otherwise, the picture will continuously roll in black/white.
• MUTE button cuts out sound from the player; MENU returns the player to the
movie menu at the beginning of a disc; VOL controls player volume.
When displayed on TV, function is not operational on the disc.
AD
A
P
E
X
D
I
G
I
T
A
L
7
Continued
Remote Control
PREPARING THE REMOTE CONTROL
To operate the DVD video player, you must first place the batteries in the remote control.
1
2
3
Open the cover.
Insert batteries (AA size).
Make sure to match the + and - on
the batteries to the marks inside the
battery compartment.
Close the cover.
OPERATING WITH THE REMOTE CONTROL
Operating video player with the remote control.
1
The remote control must point at the remote sensor in order for the
player to function correctly.
Distance: Maximum of 7 m from the front of the remote sensor.
30˚
30˚
Angle:
Approximately 30º from each direction.
*Do not place the remote sensor towards any light source such as direct sunlight.
The DVD video player may malfunction.
NOTICE (BATTERIES)
INCORRECT USE OF BATTERIES MIGHT CAUSE THEM TO LEAK OR CORRODE.
• Do not place the batteries in the wrong direction.
• It is dangerous to charge/heat/open or short-circuit the batteries.
• Do not leave dead batteries or mix old/new batteries in the remote control.
• When not using the remote control for a long duration of time, remove the batteries.When operating range becomes reduced, replace.
• If leakage from the battery occurs, wipe the battery liquid from the battery compartment, then replace.
NOTICE (REMOTE CONTROL)
• The remote control should be aimed directly towards the remote sensor of the DVD video player.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
8
Connecting to a TV
GOOD, BETTER, BEST
Connecting the DVD video player to your TV.
• How to setup the sound output:
From the SETUP MENU, select GENERAL SETUP by pressing ENTER. Use “down arrow” key and set the
“AUDIO OUT” to “ANALOG”.
GOOD
BETTER
Red
Black
White
Yellow
White
Red
S-Video cord
(optional)
TV Video Input
TV Audio Input
White
Red
Red
White
Yellow
Black
Connect the DVD video player with an optional S Video
cable if the TV has an S video input. Do not connect the
yellow video cable if using the S Video cable.
NOTICE
• Refer to the manual of the connected TV.
• Turn off power and unplug both units before connecting.
• If you connect the DVD video player to a video cassette recorder (VCR), or TV/VCR combination, the playback picture will be
distorted because all dvd players incorporate copyright protection circuitry by Macrovision.
• • If your TV only has a cable antenna connection and no video inputs to connect your TV to the DVD player, you will need to
purchase an RF adapter from your dealer.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
9
Connecting to a TV using a RF Modulator
Note: Not all RF Modulators are compatible
with APEX Digital players. Please see our
website for recommendations.
Many older televisions do not have the newer component-video, composite-video, or s-video connections that
optimize DVD technology. While it would be advised to purchase a newer television in order to take full advantage of
the digital quality of DVD’s, it is possible to connect an older television to a DVD player. This connection requires a
device called an RF modulator.
First, it is necessary to ascertain whether or not your TV needs a RF modulator. Look at the back of your TV. If you
see three input connectors lined up in a row, in the colors of yellow, red, and white, then you will not need an RF
modulator. If you see a connector labeled "s-video", then you will not need an RF modulator. If you do not have either
of these connectors, then you will need to purchase an RF modulator from the store where you purchased your Apex
Digital DVD player or other home electronics retailers.
Older televisions use a coaxial connection, which combines all of the video signal from an exterior source into a
single line. This line is then translated by your TV into the picture you see. The RF modulator combines the output
signals from the DVD player, or any other device, into the coaxial connection for use by your television.
Below are written and pictoral instructions on the proper way to connect an RF modulator to your Apex DVD player
and your TV.
Connection 1
Figure 1
Connecting the TV to the DVD through the
VCR
DVD (Back)
Your TV (Back)
Note: Many VCRs will distort the picture of a DVD
player. This is NOT a malfunction of the DVD player
or VCR. All DVD manufacturers are required to
install macrovision copyright ciruritry to prevent
copying via VCR. This is what causes the distortion.
AUDIO OUT
UHF/Antenna IN
Coaxial
COAXIAL
L
1
(L)
(R)
2
R
VIDEO OUT
1) Connect the three-terminal composite video
cable to the back of your Apex DVD player. This
cable has three prongs, one each in yellow, red,
and white. The yellow prong will go into the jack
labeled "Video Out"; the white prong will go into the
jack labeled "Front-L"; the
RF-Modulator
To TV Antenna
TV/Audio Input
Conntection
TV/ Video Input
Conntection
L
R
V
(V)
(V)
(L)
(R)
Your VCR (Back)
red prong will go into the jack labeled
"Front-R".
UHF/Antenna OUT
Coaxial
2) Connect the opposite end of the composite-video
cable into the back of the RF modulator. Make sure
to match up the colors correctly.
3) Connect a coaxial cable from the "Antenna Out"
jack on the back of your VCR to the "Antenna" jack
on the RF modulator. The coaxial cable is the one-
wire, metal-ended type that you screw onto the
VCR.
5) Make sure your TV is set to the appropriate
channel before using your DVD player. In most cases,
this is channel 3 or 4.
4) Connect a coaxial cable from the "To TV" jack on
the RF modulator to the jack on the back of your
TV.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
10
Continued
Connecting to a TV using a RF Modulator
Connection 2
Figure 2
Connecting the TV to the DVD through the
Cable or Satelite Box
DVD (Back)
Your TV (Back)
AUDIO OUT
L
1
UHF/Antenna IN
Coaxial
1) Connect the three-terminal composite video
COAXIAL
cable to the back of your Apex DVD player. This
(L)
cable has three prongs, one each in yellow, red,
and white. The yellow prong will go into the jack
labeled "Video Out"; the white prong will go into
the jack labeled "Front-L"; the red prong will go
into the jack labeled "Front-R".
(R)
2
R
VIDEO OUT
RF-Modulator
TV/Audio Input
Conntection
TV/ Video Input
Conntection
L
R
V
To TV Antenna
(V)
(V)
(L)
(R)
2) Connect the opposite end of the composite-
video cable into the back of the RF modulator.
Make sure to match up the colors correctly.
Your Cable/Satelite Box
OUT IN
To your Cable/Satelite connection
3) Connect a coaxial cable from the "Antenna
Out" jack on the back of your Cable or Satellite
receiver to the "Antenna" jack on the RF
modulator. The coaxial cable is the one-wire,
metal-ended type that you screw onto the VCR.
4) Connect a coaxial cable from the "To TV" jack on the RF modulator
to the jack on the back of your TV.
5) Make sure your TV is set to the appropriate channel before using
your DVD player. In most cases, this is channel 3 or 4.
Connection 3
Figure 3
Connecting the TV , DVD, VCR, and Cable
or Satelite Box
(Back)
Your TV (Back)
1) Connect the three-terminal composite video
cable to the back of your Apex DVD player. This
cable has three prongs, one each in yellow, red,
and white. The yellow prong will go into the jack
labeled "Video Out"; the white prong will go into
the jack labeled "Front-L"; the red prong will go
into the jack labeled "Front-R".
AUDIO OUT
UHF/Antenna IN
Coaxial
COAXIAL
L
1
(L)
(R)
2
R
VIDEO OUT
RF-Modulator
To TV Antenna
TV/ Video Input
Conntection
(V)
L
R
V
(V)
(L)
2) Connect the opposite end of the composite-
video cable into the back of the RF modulator.
Make sure to match up the colors correctly.
TV/Audio Input
Conntection
(R)
Your VCR (Back)
UHF/Antenna OUT
Coaxial
Your Cable/Satelite Box
OUT IN
IN
3) Connect a coaxial cable from the "Antenna
Out" jack on the back of your cable or satellite
receiver to the "Antenna In" jack on the back of
your VCR. The coaxial cable is the one-wire,
metal-ended type that you screw onto the VCR.
OUT
To your Cable/Satelite connection
on the RF modulator to the jack on
the back of your TV.
that the VCR is set to the
appropriate channel, as well. This
selector is usually on the back of
your VCR. Consult your VCR
manual for further information.
4) Connect a coaxial cable from the "Antenna
Out" jack on the back of your VCR to the
"Antenna" jack on the RF modulator.
6) Make sure your TV is set to the
appropriate channel before using
your DVD player. In most cases, this
is channel 3 or 4. Also make sure
5) Connect a coaxial cable from the "To TV" jack
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
11
Continued
Connecting to Optional Equipment
WARNING
Do not set "AUDIO OUTPUT" to "SPDIF/RAW" via the SETUP MENU display, unless connecting (the
PCM/BITSTREAM jack) a receiver that has the Dolby Digital/DTS decoding. Take precautions as excessive volume
may damage your speakers as well as your hearing.
Enjoying Dolby Pro Logic Surround
Enjoying Digital Stereo Sound (BETTER)
Digital Stereo
Sound (GOOD)
Dolby Pro Logic Surround
Enjoy the dynamic sound of 2 Channel Digital
Stereo by connecting an amplifier equipped with
a digital audio input and speaker system (right
and left front speakers).
Enjoy the dynamic realistic sound of Dolby Pro
Logic Surround by connecting an amplifier and
speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
To VIDEO
OUT
To PCM/BITSTREAM
Yellow
Coaxial cable
(Optional)
To digital
audio input
Connection
Example
Amplifier equipped
with digital audio input
To video
input
Front
speaker
(left)
TV
Front
speaker
(right)
TV
Set "AUDIO OUTPUT" to "SPDIF/PCM" via the
setup menu.
Set "AUDIO OUTPUT" to "ANALOG" via the
setup menu.
NOTICE
• Refer to the manual of the connected TV.
• Turn off power and unplug both units before setting connecting.
• Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortable listening
level to avoid speaker damage.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
12
Continued
Connecting to Optional Equipment
Enjoy Dolby Digital or DTS (BEST)
Dolby Digital/DTS
Dolby Digital and DTS programming can deliver surround sound with
five discrete full range channels plus a sixth channel for a subwoofer.
You can enjoy your APEX DVD with a Dolby Digital or DTS Digital
Surround Sound System. All you need is to connect your DVD player
to a Dolby Digital/DTS receiver or a Dolby Digital Ready receiver with
an external decoder.
To VIDEO OUT
To PCM/BITSTREAM
(Optional)
• How to setup the sound output:
From the SETUP MENU display, select General Setup by pressing ENTER.
Use “down arrow” key, set the "AUDIO OUT PUT" to "SPDIF/RAW".
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
It is forbidden by law to copy, broadcast, show, play in
public, and rent copyrighted material without permission.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
Manufactured under license from Dolby Labs.
" Dolby" and the Double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works.
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
c
1992-1997 Dolby Laboratories, Inc. All rights
reserved.
DTS and DTS Digital Out are trademarks of Digital
Theater System, Inc.
NOTICE
• Do not connect the PCM/BITSTREAM jack of the DVD video player to the AC-3 RF input of a Dolby Digital receiver. Instead,
connect to the “DIGITAL” or “COAXIAL” input of a Dolby Digital/DTS receiver or Processor. The input of the A/V receiver is not
compatible with the PCM/BITSTREAM jack and is primarily for Laserdiscs only.
• Connect the PCM/BITSTREAM jack of the DVD video player to the "DIGITAL" or "COAXIAL" input of a Dolby Digital/DTS receiver
or Processor.
• Refer to the manual of the connected TV.
• Adjust the volume of your receiver to a comfortable listening level to avoid any speaker damage.
• When connecting any disconnecting the DVD video player, turn off the amplifier to avoid any speaker damage.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
13
MP3 and VCD?
WHAT IS MP3?
MP3 refers to a new format of music files available for playback over the internet because of the popularity to
download music from MP3 websites on to ones computer. APEX DIGITAL is the first company to offer in a home
DVD player, the ability to playback CD-R discs recorded with MP3 audio files.
WHAT IS VCD?
Size and shape of any regular music CD with the same digital audio, plus good video capability. It is a new
video format that offers over an hour of playing time, full CD-quality, stereo sound, and more.
Notice: When you playback video CD, you must turn PBC OFF in order to stop the chapter/scene.
PLAYING AN MP3 FORMAT
You can play an MP3 CD by different “PLAY MODE” such as:
- “FOLDER” (normal playback)
- “FOLDER R” (repeat playback on a specific folder)
- “REP-ONE” (repeat playback on a song)
- “SINGLE”
(playback a song only one time)
- “SHUFFLE” (random playback)
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
14
MP3 Operation
PLAY AN MP3 FORMAT
1. To pIay you must view through your television. Insert an MP3 CD, the DVD video player will initialize
the disc when the tray is closed and the directory (folder) will be shown in an MP3 MENU on screen.
2. Press
twice to select and highlight the PLAY MODE.
Then press
Then press
each way to select play mode options (repeat, shuffle, etc.)
twice then the “down” key to select and highlight an MP3 file (song).
Press ENTER to highlight your list of songs. Press “down” key to select and highlight.
3. Press ENTER to play the MP3 file. Press
or
during playback to skip the tracks. If you need
to return to the main directory (folder), press STOP.
MP3 MENU
ROOT
0
1
2
3
4
5
..
0
1
2
3
4
5
BBBBBBBBBBB
CCCCCCCCCCC
DDDDDDDDDDD
EEEEEEEEEEE
FFFFFFFFFFF
SSSSSSSSSSS
TTTTTTTTTTT
VVVVVVVVVVV
ZZZZZZZZZZZ
UUUUUUUUUUU
MP3
MP3
PLAY MODE:
FOLDER
NOTICE
• The upper left column is a list showing the name of the folder. The upper right column is a list showing the name of the song and
the sub-folder.
• Fast Forward
or
Fast Reverse are not available during MP3 playback.
• “ “ sign in front of a file name indicates that this is a folder, not a MP3 file.
• “MP3” sign in front of a file name indicates that this is a MP3 file.
• During MP3 playback, you cannot access to “PLAY MODE” folder or songs.
• You are allowed a maximum of 11 characters for each folder or song.
• For “SHUFFLE” playback, you are allowed playback randomly in a folder only.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
15
Playing Back a Disc
HOW TO PLAYBACK A DISC.
Basic Playback (see page 9 -11 for connection details)
How to playback DVD video discs or VIDEO CDs
• Turn on the TV and choose the video input source which is connected to the DVD video player.
How to enjoy the sound from the audio system
• Turn on the audio system and choose the input source that is connected to the DVD video player.
Set the AUDIO OUTPUT to DIGITAL OUTPUT OFF from the SETUP MENU display if you don’t have
the necessary equipment to enjoy Dolby Digital or DTS surround sound.
1. Press the POWER button displayed on the front panel.
POWER
2. Press the OPEN/CLOSE button.
This will open the disc tray.
3. Place the disc on the disc tray.
Notice
• A disc may be damaged if not correctly
placed on the guides in the disc tray. This
may also cause the DVD video player to
malfunction.
• Do not force or place anything other than 5”
Be sure the playback side is faced down.
DVD’s or CD’s on the disc tray.
4. Press the PLAY button.
After closing the disc tray playback will start.
Notice
If the disc you want to playback is a DVD disc, the DVD
• The menu screen will appear automatically
video player will start playback automatically. If the disc
or you may access the menu screen by
you want to playback is a VCD or a CD, press the PLAY
pressing the TITLE button.
button to start playback.
NOTICE
• Moving the DVD video player during playback may cause damage to the disc as well as the player.
• To open and close the disc tray, you should only use the OPEN/CLOSE button on the remote control or DVD video player.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
16
Continued
Playing Back a Disc
FOR A HIGHER QUALITY PICTURE
DVD discs produce a high resolution picture and abundance of information. This
may cause some picture noise on the TV during playback. The noise will vary
depending on the selected TV used with the DVD video player. To control picture
noise reduce the sharpness adjustment on your TV when viewing DVD discs.
ABOUT DVD VCD CD
DVD VCD CD icons will appear depending on the disc being played back.
ENTER/PLAY
STOP
PAUSE
DVD: DVD video discs
VCD: Video CDs
CD: Audio CDs
To Fast FORWARD/REVERSE press the RIGHT/LEFT arrow key on the
remote control.
HOW TO START PLAYBACK FROM THE MENU SCREEN
1. Press
or the number buttons to select the title.
Title 2
Title 4
Title 1
Title 3
2. Press the ENTER/PLAY button.
The DVD video player will start playback from
the title selected.
HOW TO REMOVE THE DISC
HOW TO PAUSE PLAYBACK (STILL PLAYBACK)
Press the PAUSE during playback.
Press the OPEN/CLOSE button.
Wait until the disc tray is completely open
before removing any discs.
After removing the discs, press the
OPEN/CLOSE button to close the
disc tray.
Press the PAUSE or ENTER/PLAY
button to resume normal playback.
HOW TO STOP PLAYBACK
Press the STOP button.
NOTICE
STOP
At the completion of each movie a menu screen will appear.
Be aware that the on-screen setup menu may damage your
TV by permanently burning that image onto the screen. To
avoid this, press the STOP button at the completion of each
movie. You may also decide to setup the SCREEN SAVER.
The DVD video player is stopped.
Press the ENTER/PLAY button to
replay.
Press the STOP button twice.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
17
Continued
Playing Back a Disc
ADVANCED PLAYBACK
The DVD video player allows you to playback discs at various speeds.
Slow
Motion
Last
Play
Frame by
Frame
2X
4X
6X
8X
STEP
ENTER/PLAY
PAUSE
PLAYING AT 2X, 4X, 6X OR 8X THE NORMAL SPEED
You can play back a disc at 2x, 4x, 6x or 8x the normal speed.
FWD
REV
Press the REV or FWD button during playback.
The playback speed becomes 2x the normal speed.
The playback speed changes, each time you press the REV or FWD button.
REW: Fast reverse
FWD: Fast forward
TV SCREEN
FF 2x
FF 4x
FF 6x
FF 8x
TO RESUME NORMAL PLAYBACK.
Press ENTER/PLAY.
2x the normal speed
4x the normal speed
6x the normal speed
8x the normal speed
• Video CD, Audio CD
The rewind or forward playback alternates between 1x, 2x, 3x, 4x speed.
NOTICE
• The DVD video player will not playback sound and subtitles during scan reverse and forward playback of DVD video discs. The DVD
video player will play sound during fast forward or fast reverse playback of audio CDs.
• The speeds may vary slightly from disc to disc and the 2x, 4x, 6x, and 8x speeds are only approximate speeds.
• MP3 CD does not utilize this feature.
PLAYING FRAME BY FRAME
Press the STEP button during playback.
STEP
The picture will advance one frame each time you press
the STEP button. Sound is muted
TO RESUME NORMAL PLAYBACK.
Press ENTER/PLAY.
NOTICE
• MP3 CD does not utilize this feature.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
18
Continued
Playing Back a Disc
PLAYING IN SLOW-MOTION
A disc can also be played back in slow-motion.
TV SCREEN (FORWARD)
SF 2x
SF 4x
SF 8x
PLAY
1/2 the normal speed
1/4 the normal speed
1/8 the normal speed
normal speed
TV SCREEN (REVERSE)
SR 2x
SR 4x
SR 8x
PLAY
SLOW
1/2 the normal speed
1/4 the normal speed
1/8 the normal speed
normal speed
Press the SLOW button during playback
The playback speed becomes 1/2, 1/4, or 1/8 of the normal speed
each time you press the SLOW button.
ENTER/PLAY
(Reverse slow play as the same.)
NOTICE
TO RESUME NORMAL PLAYBACK.
• During the slow-motion playback, the sound is muted.
• MP3 CD/CDDA does not utilize this feature.
• VCD only does forward slow-motion playback.
Press ENTER/PLAY.
RESUMING PLAYBACK FROM THE SAME LOCATION
This DVD video player allows you to stop playback and
continue playback later from the same location on the disc.
1. Press the STOP button
STOP
This will interrupt the playback and the DVD video player will
memorizes the location where you stopped playback.
2. Press the ENTER/PLAY button
The DVD video player will resume the playback from the location
where you stopped playback.
2
1
NOTICE
• The following action will cancel the RESUME function:
- Unplugging the DVD video player after you stop playback.
- Ejecting the disc.
- Adjusting/changing the parental lock or selecting a different language setting.
• On occasion depending on the disc, you may experience a difference of location where playback resumes.
• MP3 CDs does not utilize this feature.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
19
Locating a Specific Title, Chapter or Track
THE DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES. THE TITLES ARE SUB-DIVIDED INTO
CHAPTERS. MOREOVER, VIDEO CD, AUDIO CD and MP3 CD ARE DIVIDED INTO TRACKS. YOU CAN
CONVENIENTLY LOCATE ANY SPECIFIC TITLE, CHAPTER, OR TRACK WITH THIS DVD
VIDEO PLAYER.
Chapter 1
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Track 1
Track 2
Track 3
Track 4
Track 5
TITLE 1
TITLE 2
DVD Video Disc
VIDEO CD/Audio CD
LOCATING A TITLE USING THE TITLE MENU
You can locate a specific title using the title menu function, if a DVD video disc contains a title menu.
TITLE
1. Press the TITLE button
Title 2
Title 1
On the TV screen, the title menu will appear.
2. Press the
button to select the title
Title 4
Title 3
you want
You can also directly locate a specific title by pressing its assigned
number with the number buttons.
Example of a title menu.
3. Press the ENTER/PLAY button
This will cause the DVD video player to start playback from chapter 1 of the
title selected.
NOTICE
• You may find that some discs will not respond to this function.
• If different instructions appear on the TV screen, follow those instructions. The instructions above are describing the basic
procedure where the procedures may vary depending on the contents of the DVD video disc.
LOCATING A SPECIFIC CHAPTER OR TRACK
This DVD video player allows you to locate consecutive chapters or tracks.
SKIP
SKIP
Press the SKIP
or
button repeatedly to display the requested chapter or track
The DVD video player starts playback from the selected chapter or track.
How to locate preceeding chapters or tracks
• When you press the SKIP
button, the DVD video player starts playback from the beginning of
the preceeding chapter or track.
How to locate succeeding chapters or tracks
• When you press the SKIP
button, the DVD video player starts playback from the beginning of
the succeeding chapter or track.
Notice: On some discs the titles may not display the sub-divided chapters.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
20
Continued
Locating a Specific Title, Chapter or Track
VIEW INDIVIDUAL CHAPTERS
If the DVD video disc contains different chapters, you can locate a
specific chapter.
PBC OFF
1. Press PBC OFF.
NUMBER BUTTONS
PBC OFF
GOTO
PBC OFF
2. Press
to show the rest of the chapters.
ENTER/PLAY
3. Digest function: View a frame from each chapter.
The DVD player starts to play selected chapter.
• Return to normal playback, Press
PBC OFF again.
• The player displays a frame from 9 chapters at a time.
1
2
5
8
3
6
9
4
7
+10
0
LOCATING A TITLE
If a DVD video disc contains title numbers, you can locate a specific title by directly selecting a title number.
3. Press ENTER/PLAY button.
1. Press GOTO during playback.
Make sure that the space next to
TITLE is highlighted.
To select title 18:
GOTO
2. Press numbers to select the title and
chapter you want.
+10
8
1
4
7
2
5
8
3
6
9
To select title 22:
+10
+10
2
2
e.g. To select title 2
+10
0
02
TITLE:
/02 CHAPTER: 03/03
NOTES
• By pressing
you may shift the highlights between the TITLE and CHAPTERS.
• In order to access the GOTO function on some discs, you must first press the PBC OFF.
• To select the time, you can press the GOTO twice.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
21
Playing Repeatedly
THIS DVD VIDEO PLAYER ALLOWS YOU TO PLAY/BACK A SPECIFIC TITLE,
CHAPTER, TRACK, OR SEGMENT REPEATEDLY. (TITLE REPEAT,
CHAPTER/TRACK REPEAT, A-B REPEAT).
HOW TO REPEAT A TITLE, CHAPTER, OR TRACK
1. Select the title, chapter, or track you want to repeat.
REPEAT
A-B RPT
2. Press the REPEAT button.
The repeat mode changes, each time you press the REPEAT button.
REPEAT
REP-ONE
REP-ALL
Repeats the same chapter.
Repeats the same title.
REPEAT OFF
Resumes normal playback.
DVD video disc
HOW TO REPEAT A SPECIFIC SEGMENT
A-B RPT
1. Press the A-B RPT button at the beginning of the
segment in which you want to repeat playback.
(point A)
A to B
SET A
A-B RPT
A-B RPT
2. Press the A-B RPT button again at the end of the
segment (point B).
The DVD video player will automatically return to point A and
A to B
SET B
start to repeat playback of the selected segment (A-B).
3. Press the A-B RPT button to cancel the A-B
repeat function.
A to B
CANCELLED
The DVD video player will resume to normal playback.
NOTICE
• Depending on the disc, you may find a difference between point A and the location where playback actually resumes.
• If a segment allows for multiple camera angles, you can not set the A-B repeat function.
• Be aware that some discs will not respond to the A-B repeat function.
• MP3 CD/ CDDA does not utilize this feature.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
22
Playing in Random Order
THIS DVD VIDEO PLAYER ALLOWS YOU TO PLAY/BACK TITLES, CHAPTERS WITHIN A TITLE, OR
TRACKS IN RANDOM ORDER. (RANDOM PLAYBACK)
PLAYING TITLES IN RANDOM ORDER
This DVD video player will automatically choose the titles in a DVD video disc and play them back randomly.
PBC OFF
1. Press the PBC OFF button
2. Press the SHUFFLE button during stop
SHUFFLE
SHUFFLE ON
SHUFFLE
3. Press the ENTER/PLAY button.
PBC OFF
The DVD video player will now start
random playback.
NOTICE
You must press the ENTER/PLAY button within 5 seconds after
you press the SHUFFLE button.
ENTER/PLAY
TO RESUME NORMAL PLAYBACK.
Press PBC OFF during stop, then
press ENTER/PLAY.
PBC OFF
NOTICE
• The DVD video player will go to another chapter or track and start playback if you press the SKIP
button during random playback.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
23
Zooming a Picture/ Vocal Assist On VCD
ZOOMING A PICTURE
This DVD video player allows you to zoom into a picture as well as shift the zoom point.
Press ZOOM during normal playback or slow - motion.
The DVD video player magnifies in the center of the picture.
ZOOM X 2
ZOOM X 4
If you press
during zoom playback, the zoom point shifts.
TO RESUME NORMAL PLAYBACK.
Press ZOOM during zoom playback.
VOCAL ASSIST
ZOOM
VOCAL ASSIST
Vocal cancel:
Eliminates the vocal sound from the music recorded in a
VIDEO CD.
Vocal change:
When you sing through the microphone, the vocal part recorded
in Sound-multiplex is eliminated and your voice will be heard.
The vocal cancel function may not work on some discs.
The vocal change function works with a disc recorded in sound-multiplex.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
24
Selecting Camera Angles/ Language / Audio Settings
THIS DVD VIDEO PLAYER ALLOWS YOU TO SELECT FROM SEVERAL
DIFFERENT ANGLES AND LANGUAGES.
ANGLE 1
ANGLE 2
ANGLE
AUDIO
Good evening
Bonsoir
Buenas tardes
Selecting a language
Selecting the camera angle
HOW TO CHANGE THE CAMERA ANGLE
Press the ANGLE button while playing back a scene recorded with
multiple angles.
2/2
1/2
• You may only press the ANGLE button when the angle icon
is flashing on the DVD display.
• Each time you press the ANGLE button, the angle
ANGLE
will change.
NOTICE
• The angle function will not work on DVD video discs that do not contain recorded multiple angles.
• During still playback, you are able to change the camera angle. However, when you resume to normal playback, the camera angle
changes to the new settings.
• The angle icon indicator will illuminate while playing back a title that contains at least one scene recorded from multiple angles.
HOW TO SELECT A PLAYBACK AUDIO SETTING
This DVD video player allows you to select a preferred language and sound recording system
from those included on the DVD video disc.
1. Press the AUDIO button during playback.
2. Press the AUDIO button again to
cycle backwards.
AUDIO
-
1/3
:
AC
-
3
5.1
ENGLISH
AUDIO
AUDIO
AUDIO
-
2/3
3/3
1/3
:
AC
AC
AC
-
3
3
3
5.1
5.1
5.1
ENGLISH
SPANISH
FRENCH
Language
AUDIO
Dolby AC-3
-
:
-
Total Audio Channels
Current Audio Position
-
:
-
Recording systems
This DVD video player uses the Dolby Digital, MPEG 2, PCM and DTS recording systems. It cannot playback DVD video discs
recorded in any other recorded format.
NOTICE
• The player returns to the initial default settings, when you turn on the DVD video player or replace a disc.
• The DVD video player plays the prior sound programmed on the disc, when you select a format which is not included on the disc.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
25
Playing in a Favorite Order
COMBINE YOUR FAVORITE TITLES, CHAPTERS, OR TRACKS AND PLAY
THEM BACK IN ANY ORDER. PROGRAM UP TO 99 ITEMS INTO THE
MEMORY. (PROGRAM PLAYBACK)
PROGRAM
CLEAR
HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVORITE ORDER
The program playback function will automatically playback titles, chapters or
tracks in the order preprogrammed.
PROGRAM
1. Insert a disc, turn PBC OFF
then press the PROGRAM
button.
At this time, the menu will appear.
3. Press the ENTER/PLAY button
PBC OFF
PROGRAM
P 00:00
The DVD video player starts
memory playback.
2. Using the numbered button, select
the items you want in the order you
want them programmed in.
To CHANGE the programmed item:
Press the STOP button, then follow step 1.
To CANCEL the programmed item:
Press the STOP button, then press the PLAY
button.
Memory 1
Memory 2
PROGRAM
PROGRAM
P01:04
P02:09
To RESUME NORMAL PLAYBACK
from memory playback
Press the PBC OFF button during stop.
The MEMORY indicator will disappear.
Memory 3
Memory 4
PROGRAM
PROGRAM
P03:01
P04:03
PBC OFF
To reset program, press CLEAR.
CLEAR
NOTICE
• When the DVD video player is turned off, or if the discs are removed, the program item will be removed.
• Depending on the disc, the program playback may not function.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
26
Selecting Subtitles
THIS DVD VIDEO PLAYER ALLOWS YOU TO DISPLAY THE SUBTITLES
FROM THOSE INCLUDED ON THE DISC, ON TO YOUR TV SCREEN.
Good evening
Bonsoir
Buenas tardes
HOW TO DISPLAY SUBTITLES
You have the option to select a preferred subtitle
from those included on the DVD video disc.
Press the SUB-T button
during playback.
SUBTITLE 1
1/03
SUB-T
SUBTITLE 2
2/03
SUBTITLE 3
3/03
SUBTITLE OFF
SUB-T
To TURN OFF the subtitles.
Press the SUB-T during playback
until the subtitles disappears.
SUB-T
SUBTITLE OFF
NOTICE
• With some DVD’s, you may not be able to turn off the subtitles and they will appear on
screen automatically.
• As you press the SUB-T button, the subtitles may not appear immediately during some scenes.
• If the subtitles continue to show on your TV even after the DVD has been turned off, please refer to the TV’s close
caption settings.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
27
Using the On-Screen Display
THE DVD VIDEO PLAYER ALLOWS YOU TO VIEW THE OPERATIONAL STATUS AND DISC
INFORMATION ON YOUR TV SCREEN.
CHECKING THE OPERATIONAL STATUS
With this function you can view the following:
-Current title
-Track number
-Total playing time
DISPLAY
Press DISPLAY during playback
Current Title
Current Chapter
TITLE
03/10
CHAPTER
01/02
0:01:30
Total Chapter
Total Title
TITLE
REMAIN
1:14:08
DISPLAY
CHAPTER
0:00:45
ELAPSED
CHAPTER
0:16:22
REMAIN
Total playing time of the
disc is displayed on the
DVD display.
TO TURN OFF THE ON-SCREEN
DISPLAY
Press DISPLAY Again.
DISPLAY
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
28
Setting the Parental Lock
YOU CAN USE THE PARENTAL LOCK FUNCTION ONLY WITH DVD VIDEO
DISCS EQUIPPED WITH THE PARENTAL LOCK FEATURE.
3, 4, 5
STOP
SETTING THE PARENTAL LOCK
DVD video discs equipped with the parental lock function are rated according to
their content. The contents allowed by a parental lock level and the way a DVD
video disc can be controlled may vary from disc to disc. For example, if the disc
allows, you can edit out violent scenes unsuitable for children and replace them
with more suitable scenes, or lock out playback of the disc all together.
1. Press STOP during playback
4. Select PARENTAL, press
STOP
-
-
- PREFERENCE PAGE -
-
-
Press STOP once.
AUDIO
1. KID SAFE
2. G
3. PG
4. PG-13
5.
6. PG-R
7. NC-17
8. ADULT
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
T
MAIN PAGE
2. Press SETUP
The SETUP MENU appears on the TV screen.
SET PARENTAL CONTROL
- - SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
5. Select ratings, press ENTER
SETUP
DOLBY DIGITAL SETUP
DOLBY SURROUND SETUP
PREFERENCES
E N T E R
EXIT SETUP
6. Enter your password then press ENTER/PLAY
The pre-set password is 3308
ENTER
3. Select PREFERENCE using down key
then press ENTER.
PASSWORD VERIFY PAGE
INPUT PASSWORD:
SETUP
7. Press SETUP to exit setup,
- - SETUP MENU - - MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
press PLAY to start
DOLBY DIGITAL SETUP
PREFERENCES
TO CHANGE YOUR PASSWORD:
1. Follow step 4 to select password change.
2. Enter old password.
EXIT SETUP
GOTO PREFERENCES PAGE
3. Enter new password.
4. Re-enter to confirm your new password.
5. Press ENTER.
6. Press SETUP.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
29
Customizing the Function Settings
THIS DVD VIDEO PLAYER ALLOWS YOU TO CUSTOMIZE THE
PERFORMANCE TO YOUR PERSONAL PREFERENCE.
SETUP MENU
SETUP
DOLBY
PREFERENCES
SPEAKER SETUP
GENERAL SETUP
DIGITAL SETUP
ENTER/PLAY
DISPLAYING THE SETUP MENU SCREEN
The SETUP MENU screen asks you to select a setting category from General
Setup, Speaker Setup, Dolby Digital Setup, and Preferences. The selected
category will provide you the setting details on-screen.
- - SETUP MENU - - MAIN PAGE
- - GENERAL PAGE - -
NORMAL/PS*
NORMAL/LB
WIDE
1. Press SETUP.
GENERAL SETUP
TV DISPLAY
SPEAKER SETUP
DOLBY DIGITAL SETUP
PREFERENCES
TV TYPE
SETUP
MULTI
NTSC*
PAL
ANGLE MARK
T OSD LANG
AUDIO OUT
CAPTION
EXIT SETUP
ON
OFF*
ON*
OFF
GENERAL SETUP
Setup Current Status
SCR SAVER
MAIN PAGE
ON
OFF*
ENGLISH*
CHINESE
ANALOG*
SPDIF/RAW
SPDIF/PCM
GENERAL SETUP
Setup Current Status
2. Press
to select
category (highlight), then press
PLAY/ENTER.
- - SPEAKER SETUP PAGE - -
DOWNMIX
LT/RT
STEREO*
ENGLISH*
FRENCH
SPANISH
CHINESE
JAPANESE
MAIN PAGE
Setup Current Status
LOUD SPEAKER SETUP
LINE OUT*
RF REMOD
- - DOLBY DIGITAL SETUP - -
OP MODE
ENGLISH*
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
STEREO*
L MONO
R MONO
MIX MONO
DUAL MONO
--PREFERENCE PAGE--
AUDIO
SUBTITLE
DYNAMIC
T
MAIN PAGE
*
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
ENGLISH*
CHINESE
FRENCH
SPANISH
JAPANESE
DOLBY DIGITAL RELATED
Setup Current Status
MAIN PAGE
SET PREFERENCES
Setup Current Status
1. KID SAFE
2. G
3. PG
4. PG-13
5.
6. PG-R
7. NC-17
8. ADULT*
NOTES
• Preset password is 3308 .
• Highlighted function will be expanded at bottom of the screen.
•The SETUP MENU screen disappears if you press the SETUP
button while it is displayed.
• Functions and menu may change without notice.
* Factory defaults
3. Press SETUP to normal
playback.
CHANGE
RESET
SETUP
** You must press STOP to set up PREFERENCES.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
30
Memo On Output Sounds & PBC
DISCS AND OUTPUT SOUNDS
DVD Video Discs
VCD
CD
MP3 CD
Sound recording
system
Dolby Digital
MPEG 2
Linear PCM
96kHz
MPEG
PCM44.
1kHz
MP3
48kHz
SPDIF
/RAW
SPDIF
/PCM
SPDIF
/RAW
SPDIF
/PCM
SPDIF
/RAW
SPDIF
/PCM
SPDIF
/RAW
SPDIF
/PCM
Audio setting on
the setting screen
SPDIF
/RAW
SPDIF SPDIF
SPDIF
/PCM
SPDIF
/RAW
SPDIF
/PCM
/RAW
/RAW
ANALOG
AUDIO OUT jacks
_____
_____
_____
_____
o
o
o
o
o
o
Dolby
Digital
bitstream
PCM
(48kHz)
MPEG 2
bitstream
PCM
(48kHz)
PCM
(48kHz)
PCM
(48kHz)
PCM
(44.1kHz)
PCM
(44.1kHz)
PCM
(44.1kHz)
_____
DIGITAL
AUDIO OUT jack
ON VIDEO CD
This DVD video player supports the VIDEO CD with PBC (Version 2.0) (PBC) is the abbreviation for Play
Back Control.)
You can enjoy two kinds of playback depending on type of disc.
TYPE OF DISC
HOW TO ENJOY
VIDEO CD without PBC
(VERSION 1.1)
Audio and movie can be played back by operating the unit in the
same way as the audio CD.
VIDEO CD with PBC
(VERSION 2.0)
In addition to the operation of the VIDEO CD without PBC, you can
enjoy a playback with interactive software and software with search
function by using the menu displayed on the TV screen (Menu
Playback). Some of the functions described in this manual may not
work in some discs.
MPEG 1 AUDIO LAYER 3 DISC (MP3)
MP3 Audio Disc Play Back Capable MP3 audio disc can be played back by operating the unit in the
same way as the audio CD.
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
31
Specifications
DVD VIDEO PLAYER/OUTPUTS/SUPPLIED ACCESSORIES
DVD VIDEO PLAYER
Power supply
Power consumption
Mass
120V AC 50 or 60 Hz
20VA
3.0 kg
External dimensions
Signal system
Laser
430 x 81 x 300 mm (W/H/D)
MULTI/ NTSC/ PAL
Semiconductor laser, wavelength 650 nm
OUTPUTS
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
(Y) 1.0 V (p-p), 75 Ω negative sync., Mini DIN 4-pin x 1
(C) 0.286 V (p-p), 75 Ω
S video output
Audio output (digital audio)
Audio output (analog audio)
0.5 V (p-p), 75 Ω, pin jack x 1
2.0 V (rms), 10K Ω, pin jack(L,R) x 1
SUPPLIED ACCESSORIES
Audio cable (red and white)
Remote control
1 pair
1
2
1
1
Batteries (AA)
Video cable (yellow)
User’s manual
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
32
Check the following guide for a possible correction to a problem
before contacting customer service. Check FAQ at our website:
Troubleshooting Guide
SYMPTOMS AND CORRECTION
Symptom
Correction
No power
No picture
• Connect the power plug into the wall outlet securely.
• Verify the connection from the DVD video output to the TV video input. Then switch TV to
appropriate mode (video 1)
• Connect the video cable into the jacks securely. Refer to your television owners manual.
No sound
• Connect the audio cables into the jacks securely.
• Verify the connection from the DVD audio output to the TV or receiver audio input. Then switch
to the appropriate source on the receiver. Refer to your audio amplifier owners manual.
Rolling b/w picture
• Press the P/N button on your remote.
• Adjust the vertical hold on your TV.
Black & White
picture
• Damaged S connector (bent pin)
The playback
picture has
• A small amount of picture distortion may appear because of a poor quality video/sound transfer
to disc. This is especially true of some discs manufactured between 1997-1998..
occasional distortion • Scratched disc
Brightness is
• Connect the DVD player directly through the TV and not through any other source. What you’re
unstable or noises
are produced on
playback pictures
viewing is the effect of the copy protection circuitry required on all DVD players.
• If you don’t have a video input on your TV, you must purchase an RF adapter from your dealer.
• Place the disc with the graphics side up.
The DVD video
player does not start • Place the disc on the disc tray correctly inside the guide.
playback
• Make sure the disc is free from scratches & fingerprints.
• Press the SETUP button to turn off the menu screen.
• Cancel the parental lock function or change the parental lock level. (The Pre-set password is
3308.)
• Turn the power off then disconnect the power plug and reinsert it back into the wall. Retry again.
• Use region 1 discs only.
MP3 won’t read disc • Reburn disc as the software edition used may not be compatible with the player. Check web
or it skips
site for instruction.
• Use new editions of software such as Voyetra Audiostation 4, Adaptec’s “Easy CD Creator” or
NTI.
• Make sure MP3 file are not encoded with a variable bit rate such as provided by Real Networks.
• Replace the batteries with new ones.
The remote control
does not work
properly
AD - 1000
A
P
E
X
D
I
G
I
T
A
L
33
Limited Warranty
PLAYERS
90 DAYS LABOR
ONE YEAR REPLACEMENT OF PARTS
WHO IS COVERED?
Proof of purchase is required to receive warranty service such as the original sales receipt showing original date
of purchase from an authorized Apex Digital, Inc. dealer in N. America. Keep your original box and packaging in
case your unit needs to be shipped to us.
WHAT IS COVERED?
Warranty repair from the original date of purchase: One (1) year replacement of parts; 90 days limited labor
warranty coverage.
If you don’t have proof of purchase, your unit will be considered out-of-warranty & will be charged at a flat labor rate.
WHAT IS EXCLUDED?
Your warranty does not cover:
- Labor charges for installation or setup of the product, adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the product.
- Product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not
within the control of Apex Digital, Inc.
- A product that requires modification or adaptation to enable it to operate in any country other than the country
for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these
modifications.
- Incidental or consequential damages resulting from the product. (Some states do not allow the incidental or
consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to,
prerecorded material, whether copyrighted or not.)
BEFORE REQUESTING SERVICE:
Check your owner’s manual under “Troubleshooting Guide” and visit our website www.apexdigitalinc.com for
the latest updates under FAQ.
ORDERING ACCESSORIES:
You may purchase a remote control ($20 U.S. or $35 in Canada), owners manual ($7), and/ or firmware
upgrade, if applicable to your player ($10). Specify model number, name & address with a cashiers check made
out to Apex Digital.
MODEL # _____________________________
SERIAL # ____________________________
WHERE IS SERVICE AVAILABLE?
Please contact
APEX DIGITAL, INC.
customer service:
2919 E. Philadelphia St., Ontario, CA 91761
(909) 930-1239 Monday-Friday 8:30am-5:00pm (California)
email: [email protected]
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
A
P
E
X
D
I
G
I
T
A
L
AD - 1000
34
|