Table of Contents
Precautions .....................................................................................................................2
Package contents ............................................................................................................3
Installation instructions.................................................................................................3
Assembling the Monitor.....................................................................................................................3
Detaching the Monitor .......................................................................................................................4
Adjusting the Viewing Angle.............................................................................................................4
Connecting the Devices......................................................................................................................5
Switching the Power ..........................................................................................................................5
Adjusting display settings..............................................................................................6
External Controls ...............................................................................................................................6
OSD options....................................................................................................................7
OSD Menu .........................................................................................................................................7
Troubleshooting .............................................................................................................9
General specifications.......................................................................................10
1
Package contents
LCD Monitor
Power Cord
VGA Cable
Audio Cable
User Manual (CD)
Quick Start Guide
Installation instructions
Assembling the Monitor
1. Position the monitor on top of the stand.
2. Connect the stand into the neck of the monitor
along the track.
3
Detaching the Monitor
If you need to repackage the monitor, please separate the monitor and base, and restore them to
the carton. To detach the monitor:
1. Unplug the AC power cord to make sure the power is off.
2. Pull the 4 hooks on bottom side of the base and hold.
3. Separate the monitor and base and put them into carton.
Important
First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean
dry cloth under the monitor to protect it further. Pull the monitor slightly up and away from the
stand.
Adjusting the Viewing Angle
The viewing angle of the monitor ranges from 0°~20°.
4
Connecting the Devices
Caution: Make sure that the computer and the monitor are both disconnected from the
power supply.
AC IN
AUDIOIN
D-SUB IN
2
VGA
3
Audio
1
3
1
AC
2
VGA
AC
Audio
c
d
Power Code
VGA Cable
Attach the monitor to the power cord which should then be inserted
into a properly grounded electric socket.
Connect the signal cable to the VGA input socket of the monitor , and
connect the signal cable to the VGA output socket of the graphics card
on the computer. Then tighten the thumbscrews on the connector.
Connect the audio input socket of the LCD monitor and the computer
by means of the audio cable.
e
Audio cable
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure
the shape of the plug matches the shape of the socket it is inserted into, and
that none of the pins are bent or otherwise damaged.
Switching the Power
First, switch the power on to the monitor, then switch the power on to the computer. When you
see the LED on the power button go green, this indicates the computer is ready for use. Allow
about 10 seconds for the video signal to appear. If you do not see the green light on the power
button or a video signal, check the connections.
5
Adjusting display settings
1 2
5
3 4
AUTO
<
>
MENU
External Controls
If OSD is active, press to exit a selection in OSD. If OSD is
inactive, press and the monitor will automatically optimize the
position, focus and clock of your display.
1
AUTO
MINUS
PLUS
If OSD is active, press to select or adjust OSD options. If OSD is
inactive, press once, then press the buttons marked < or > to adjust
the volume.
2
3
4
5
<
>
If OSD is active, press to select or adjust OSD options. If OSD is
inactive, press once, then press the buttons marked < or > to adjust
the volume.
Press to view OSD.
OSD
Function
Press again to enter a selection in OSD.
Power on/off
Green: power on
Orange: in sleep mode
POWER
6
OSD options
Please refer to "External Controls" on Page 6.
To adjust the OSD settings:
1. Press the MENU button to open the OSD menu. Press again to enter a selection of 10
functions on OSD.
2. Use the buttons marked < or >, to highlight a control, then adjust the control to the desired
level.
3. When you have finished making all selections, press the AUTO button to exit the OSD.
OSD Menu
Contrast:
This adjusts dark and light shades of color relative to each other to
achieve a comfortable contrast.
Brightness:
This adjusts the brightness of the picture on the screen.
Focus:
This removes any horizontal distortion and makes the picture clear and
sharp.
Clock:
If there are any vertical stripes seen on the background of the screen this
renders them less noticeable by minimizing their size. It also changes the
size of the horizontal screen.
H-Position:
This adjusts the horizontal.
V-Position:
This adjusts the vertical.
COLOR:
There are three ways of adjusting color:
Warm (Reddish white)
Cool (Bluish white)
User defined:
You can adjust the colors red, green and blue to the intensity you desire.
7
LANGUAGE:
Select the OSD menu language from
English, German, Spanish, Russian, Traditional Chinese, French, Italian,
and Japanese.
OSD SETTING:
This changes the position of the OSD window on the screen and staying
time.
Auto Config:
System runs auto-configuration.
INFORMATION:
This shows brief information on the screen.
Reset:
Recall to default settings.
Exit:
Exit from OSD.
8
Troubleshooting
Problems
Possible Solutions
Power LED is not
ON
• Check to see if the power switch is in the ON position.
• Ensure that the Power Cord is connected.
No Picture
• Check to see if the power switch is in the ON position.
• Ensure that the Power Cord is connected.
• Ensure the video cable is securely connected to the back of the monitor
and the computer.
• Move the mouse or press any key on the keyboard to bring the monitor
out of "active off" mode.
Picture shows
inappropriate colors
• See "Color Adjustment" to adjust RGB color or to select color
temperature.
Picture bounces or a
wave pattern is
present in the
picture
• Move or switch off electrical devices that may be causing interference.
• Inspect the monitor's video cable and ensure that none of the pins are
bent.
Image is not sized
or centered properly
• Press select/auto key and the monitor will automatically optimize the
position of your display.
• See "Position adjustment".
Caution: Do not attempt to service the monitor yourself or open the computer yourself.
Please refer all servicing to qualified service personnel if the problems cannot
be solved in "Troubleshooting" section.
9
General specifications
Item
Specification
LCD Panel
Display
19-inch Flat panel active-matrix TFT LCD
Max resolution
Pixel Pitch
SXGA 1280×1024 pixels
0.294 mm
Color
16.2M
Brightness
250 cd/m² (Typical)
500:1 (Typical)
12ms (Typical)
140°
Contrast Ratio
Response Time
View Angle of Horizontal
View Angle of Vertical
External Controls
Power Button
Control Buttons
OSD Function
Contrast /Brightness
Focus/Clock
Position
140°
ON / OFF
Auto, <, >, MENU
Contrast / Brightness
Focus / Clock
Position
Color
Color
Language
Language
OSD Setting
Auto config
Information
Reset
OSD setting
Auto config
Information
Reset
Exit
Exit
Video Interface
Video
Analog 0.7V
TTL (+ / -)
1W x 2
Sync
Audio
Plug & Play
DDC2B
Power
Power Source
Power consumption during
normal operation
100~240V AC, 50/60 Hz
< 40W
Power consumption during
active off operation
< 1W
Dimension and Weight
Dimension (W×H×D)
422.2 × 433.7 × 181.9 mm (with stand)
5.6 Kg / 7.6 Kg
Weight (Net/ Gross)
10
|