.
TABLE OF CONTENTS
FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS --------------------------------------- 2
SPECIAL NOTES ON LCD MONITORS -------------------- 3
BEFORE YOU OPERATE THE MONITOR ---------------------- 3
FEATURES -------------------------------------------------------- 3
PACKING LIST --------------------------------------------------- 3
INSTALLATION INSTRUCTIONS ---------------------------- 4
CONTROLS AND CONNECTORS --------------------------- 5
ADJUSTING THE VIEWING ANGLE ------------------------ 6
OPERATING INSTRUCTIONS -------------------------------------- 7
GENERAL INSTRUCTIONS ----------------------------------- 7
HOW TO ADJUST A SETTING ------------------------------- 9
ADJUSTING THE PICTURE ------------------------------ 10-11
PLUG AND PLAY ----------------------------------------------- 12
TECHNICAL SUPPORT(FAQ) --------------------------------- 13-14
ERROR MESSAGE & POSSIBLE SOLUTION ---------
15
APPENDIX ------------------------------------------------------------- 16
SPECIFICATIONS ------------------------------------------ 16-17
FACTORY PRESET TIMING TABLE ---------------------
18
CONNECTOR PIN ASSIGNMENT ------------------------ 19
For more information and help in recycling, please visit the following
websites:
PRECAUTIONS
z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen
sink, laundry tub, swimming pool or in a wet basement.
z Do not place the monitor on an unstable cart, stand, or table. If the monitor
falls, it can injure a person and cause serious damage to the appliance.
Use only a cart or stand recommended by the manufacturer or sold with
the monitor. If you mount the monitor on a wall or shelf, use a mounting kit
approved by the manufacturer and follow the kit instructions.
z Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of the monitor and to protect it
from overheating, be sure these openings are not blocked or covered. Do
not place the monitor on a bed, sofa, rug, or similar surface. Do not place
the monitor near or over a radiator or heat register. Do not place the
monitor in a bookcase or cabinet unless proper ventilation is provided.
z The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
z The monitor is equipped with a three-pronged grounded plug, a plug with a
third (grounding) pin. This plug will fit only into a grounded power outlet as
a safety feature. If your outlet does not accommodate the three-wire plug,
have an electrician install the correct outlet, or ground the appliance safely.
Do not defeat the safety purpose of the grounded plug.
z Unplug the unit during a lightening storm or when it will not be used for
long period of time. This will protect the monitor from damage due to
power surges.
z Do not overload power strips and extension cords. Overloading can result
in fire or electric shock.
z Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
z Do not attempt to service the monitor by yourself; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.
z To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 - 240V AC, Min. 5A.
z The wall socket shall be installed near the equipment and shall be easily
accessible.
2
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a
problem.
NOTES
•
Due to the nature of the fluorescent light, the screen may flicker during
initial use. Turn off the Power Switch and then turn it on again to make
sure the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include
blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the
time.
•
Due to the nature of the LCD screen, an afterimage of the previous screen
may remain after switching the image, when the same image is displayed
for hours. In this case, the screen is recovered slowly by changing the
image or turning off the Power Switch for hours.
BEFORE YOU OPERATE THE MONITOR
FEATURES
•
•
•
•
•
•
17”W TFT Color LCD Monitor
Crisp, Clear Display for Windows
Re co m m e n e d Re so lu t io n s: 1440 X 900 @60Hz
EPA ENERGY STAR®
Ergonomic Design
Space Saving, Compact Case Design
CHECKING THE CONTENTS OF THE PACKAGE
Th e p ro d u ct p a cka g e sh o u ld in clu d e t h e fo llo w in g it e m s:
1. LCD Monitor
2. Owner's Manual
3. Power Cord
4. 15-pin D-Sub Cable
5. Quick Start Guide
3
INSTALLATION INSTRUCTIONS
SWIVEL BASE IVEL BASE
Install
Remove
Figure 1 Installing and Removing the Swivel Base
POWERCORD
Po w e r So u rce :
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an External universal power supply that allows
operation in either 100/120V AC or 220/240V AC voltage area (No user
adjustment is required.)
3. Connect the AC-power cord into your LCD monitor’s AC-power-input. The
AC-power cord may be connected to either a wall power outlet or the
power outlet socket on your PC, depending on the type of power cord
supplied with your LCD monitor.
NOTES
A certified power supply cord has to be used with this equipment. The relevant
national installation and/or equipment regulations shall be considered. A
certified power supply cord not lighter than ordinary polyvinyl chloride flexible
cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or
H05VVH2-F2 3G 0.75mm2) shall be used. Alternative a flexible cord be of
synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2)
shall be used.
4
CONTROLS AND CONNECTORS
CABLE CONNECTIONS
Turn off your computer before performing the procedure below.
1
Plug the power cable of your monitor into a nearby outlet. Plug the other
end of the power cord into the PC port.
2. Connect one end of the 15-pin VGA cable to the back of the monitor and
connect the other end to the computer’s D-Sub port.
3.
Turn on your monitor and computer.
2
1
Figure 2 Connecting Cables
1. Power Cable
2. Signal Cable
5
ADJUSTING THE VIEWING ANGLE
•
•
•
For optimal viewing it is recommended to look at the full face of the
monitor, then adjust the monitor’s angle to your own preference.
Hold the stand so you do not topple the monitor when you change the
monitor’s angle.
You are able to adjust the monitor’s angle from -5° to 15°.
15
-5
Figure 3
NOTES
•
•
Do not touch the LCD screen when you change the angle. It may cause
damage or break the LCD screen.
Careful attention is required not to catch your fingers or hands when you
change the angle.
6
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons
are located at front panel of the monitor (See Figure 4). By changing these
settings, the picture can be adjusted to your personal preferences.
•
•
•
The power cord should be connected.
Connect the video cable from the monitor to the video card.
Press the power button to turn on the monitor position. The power indicator
will light up.
3
4
5
2
1
Figure 4
External Control Button
EXTERNAL CONTROLS
1. Auto Config / Exit
2.
<
3. Power Button/Power Indicator
4.
5.
>
MENU / ENTER
7
FRONT PANEL CONTROL
•
/Po w e r Bu t t o n :
Press this button to turn the monitor ON or OFF, And display the monitor’s
state.
• Po w e r In d ica t o r:
Green
Orange
—
—
Power On mode.
Stand by mode.
• MENU / ENTER :
Activate OSD menu when OSD is OFF or activate/de-activate adjustment
function when OSD is ON.
• <:
navigate through adjustment icons when OSD is ON or adjust a function
when function is activated.
:
• >
navigate through adjustment icons when OSD is ON or adjust a function
when function is activated.
• Au t o Ad ju st b u t t o n / Exit :
1. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
2. When OSD menu is in off status, press this button for 2 seconds to
activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus.
NOTES
•
Do not install the monitor in a location near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
•
•
•
Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
For maximum protection, repackage your monitor as it was originally
packed at the factory.
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
8
HOW TO ADJUST A SETTING
1. Press the MENU-button to activate the OSD window.
2. Press < or > to select the desired function.
3. Press the MENU-button to select the function that you want to adjust.
4. Press < or > to change the settings of the current function.
5. To exit and save, select the exit function. If you want to adjust any other
function, repeat steps 2-4.
I. Analog-Only Model
9
ADJUSTING THE PICTURE
The descriptions for function control LEDS
Su b
Ma in
Me n u Ico n
Su b Me n u
It e m
Me n u
Ico n
De scrip t io n
Adjusts the contrast between
the foreground and background of the
screen image.
Contrast
Adjusts the background brightness of
the screen image.
Brightness
Focus
Adjusts picture Focus.
Adjusts picture Clock.
Clock
H. Position Adjust picture Focus.
V. Position Adjust picture Clock.
N/A Warm
N/A Cool
Set the color temperature to warm white.
Set the color temperature to cool white.
User /Red
Adjusts Red/Green/Blue intensity.
User/Green
User/Blue
10
N/A Language
H. Position
Multi-language selection.
Adjust the horizontal position of the
OSD.
V. Position Adjust the vertical position of the OSD.
OSD
Adjust the OSD timeout.
Timeout
N/A
DDC/CI
Turn ON/OFF DDC/CI support.
N/A Information Show the resolution, H/V frequency
and input port of current iput timing.
Clear each old status of Auto-configuration
N/A Reset
and set the color temperature to Cool.
N/A Exit
Save user adjustment and OSD disappear.
11
PLUG AND PLAY
Plu g & Pla y DDC2B Fe a t u re
This monitor is equipped with VESA DDC2B capabilities according to the
VESA DDC STANDARD. It allows the monitor to inform the host system of its
identity and, depending on the level of DDC used, communicate additional
information about its display capabilities.
The DDC2B is a bidirectional data channel based on the I2C protocol.
The host can request EDID information over the DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS
NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE
PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.
This monitor meets the Green monitor standards as set by the Video
Electronics Standards Association (VESA) and/or the United States
Environmental Protection Agency (EPA) and The Swedish Confederation
Employees (NUTEK). This feature is designed to conserve electrical energy
by reducing power consumption when there is no video-input signal present.
When there is no video input signal this monitor, following a time-out period,
will automatically switch to an OFF mode. This reduces the monitor's internal
power supply consumption. After the video input signal is restored, full power
is restored and the display is automatically redrawn. The appearance is similar
to a "Screen Saver" feature except the display is completely off. The display is
restored by pressing a key on the keyboard, or clicking the mouse.
USING THE RIGHT POWER CORD :
The accessory power cord for the Northern American region is the wallet plug
with NEMA 5-15 style and is UL listed and CSA labeled. The voltage rating for
the power cord shall be 125 volts AC.
Supplied with units intended for connection to power outlet of personal
computer: Please use a cord set consisting of a minimum No. 18 AWG, type
SJT or SVT three conductors flexible cord. One end terminates with a
grounding type attachment plug, rated 10A, 250V, CEE-22 male configuration.
The other end terminates with a molded-on type connector body, rated 10A,
250V, having standard CEE-22 female configuration.
Please note that power supply cord needs to use VDE 0602, 0625, 0821
approval power cord in European counties.
12
TECHNICAL SUPPORT (FAQ)
Problem & Question
Power LED is not on
Possible Solution
*Check if the Power Switch is in the ON
position
*Power Cord should be connected
*Check if the PC system is Plug & Play
compatible
No Plug & Play
*Check if the Video Card is Plug & Play
compatible
*Check if the D-15 plug pin of Video
Cable is bent
Picture is fuzzy
*Adjust the Contrast and Brightness
Controls.
Picture bounces or a wave *Move electrical devices that may cause
pattern is present in the picture electrical interference.
The power LED is ON (orange) *Computer Power Switch should be in
but there’s no video or no the ON position.
picture.
*Computer Video Card should be snugly
seated in its slot
*Make sure monitor’s video cable is
properly connected to the computer.
*Inspect monitor’s video cable and make
sure none of the pins are bent.
*Make sure computer is operational by
hitting the CAPS LOCK key on the
keyboard while observing the CAPS
LOCK LED. The LED should either
turn ON or OFF after hitting the CAPS
LOCK key.
Missing one of the primary*Inspect the monitor’s video cable and
colors (RED, GREEN, or
BLUE)
make sure that none of the pins are
bent.
13
Screen image is not centered or sized *Adjust pixel frequency (CLOCK) and
properly.
Picture has color defects
(white does not look white)
FOCUS or press hot-key (AUTO)
*Adjust RGB color or select color
temperature
Horizontal or vertical disturbances on *Use win 95/98 shut-down mode
the screen
Adjust CLOCK and FOCUS or
perform hot- key (AUTO-key).
CLOCK (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the picture has not correct width.
FOCUS adjusts the phase of the pixel clock signal. With a wrong phase
adjustment the picture has horizontal disturbances in light picture.
For FOCUS and CLOCK adjustment use “dot-pattern” or win 95/98 shut-down
mode pattern.
14
ERROR MESSAGE & POSSIBLE SOLUTION
CABLE NOT CONNECTED :
1. Check that the signal-cable is properly connected, If the connector is
loose, tighten the connector’s screws.
2. Check the signal -cable connection pins for damage.
INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to
display mode given in the following table (See page 18).
15
APPENDIX
SPECIFICATIONS
Driving system TFT Color LCD
LCD Panel
Size
17"
Pixel pitch
Brightness
Contrast
0.255mm( H ) × 0.255mm( V )
250cd/m2 (Typical)
700:1 (Typical)
Viewable angle 140° (H) 130° (V)
Response time 8 ms
Input
Video
R,G,B Analog Interface
H-Frequency
V-Frequency
55.469kHz – 70.635kHz
60-75Hz
Display Colors
Dot Clock
262144 Colors
170MHz
Max. Resolution
Plug & Play
1440 × 900 @75Hz
VESA DDC2BTM
≤ 37W
EPA ENERGY STAR®
ON Mode
OFF Mode
≤ 1W
Input Connector
D-Sub 15pin
Input Video Signal
Analog:0.7Vp-p(standard),
75 OHM, Positive
Maximum Screen Size
Horizontal : 367.2mm
Vertical : 229.5mm
Power Source
Environmental
Considerations
100-240V~, 50/60Hz
Operating Temp: 0° to 50°C
Storage Temp.: -20° to 60°C
Operating Humidity: 10% to 80%
400.4(W)×338.37(H)×209.81(D)mm
3.17kg
Dimensions
Weight (N. W.)
16
Switch
• Auto Adjust Key
• <
• >
• Power Button
• MENU
• Contrast
External Controls:
Functions
• Brightness
• Focus
• Clock
• H.Position
• V.Position
• Language
• DDC/CI ON/OFF
• (Warm) Color
• (Cool) Color
• RGB Color temperature
• Reset
• OSD position . timeout
• Display information
• Exit
Power Consumption ( Maximum )
45 Watts
Regulatory Compliance
CUL, FCC, VCCI, CCC, MPR II, CE,
, ISO13406-2
TÜV/GS
17
Pre se t Disp la y Mo d e s
STANDARD
RESOLUTION
HORIZONTAL
VERTICAL
FREQUENCY(KHz) FREQUENCY(KHz)
DOS
720x400
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
832x624
1024x768
1024x768
1024x768
1152x864
1280x1024
1280x1024
1440x900
1440x900
31.469
31.469
35.000
37.861
37.500
35.156
37.879
48.077
46.875
49.726
48.363
56.476
60.023
67.500
64.000
80.000
55.930
70.635
70.087
59.940
66.667
72.809
75.000
56.250
60.317
72.188
75.000
74.551
60.004
70.069
75.029
75.000
60.000
75.000
59.887
74.984
VESA VGA
SVGA
XGA
SXGA
WXGA
18
CONNECTOR PIN ASSIGNMENT
1
6
5
10
15
11
15 - Pin Color Display Signal Cable
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
+5V
Logic Ground
Monitor Ground
DDC-Serial Data
H-Sync
1.
2.
3.
4.
5.
6.
7.
8.
Red
Green
Blue
Monitor Ground
DDC-return
R-Ground
G-Ground
B-Ground
9.
10.
11.
12.
13.
14.
15.
V-Sync
DDC-Serial Clock
19
|