AT T E5812B User Manual

User’s manual  
E5812B/E5813B/E5814B/  
E1812B/E1813B/E1814B  
5.8GHz cordless telephone/  
answering system with  
caller ID/call waiting  
You must install and charge  
the battery before using the  
telephone.  
See page 7  
for easy instructions.  
STOP!  
For customer service or product information, visit our website  
In Canada dial 1 (866) 288-4268.  
CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read  
and follow these instructions carefully:  
ƨꢀ ꢁ‘ƒꢀŒŠ—ꢀ’†ƒꢀ‘“ŽŽŠ‡ƒ‚ꢀƒ†ꢂƒ€Šƒꢀ€’’ƒ—ꢀꢀƒŽŠƒ‹ƒŒ’ꢀ€’’ƒ—ꢀ2422 (SKU 23402, part number  
89-0047-00-00) or equivalent. To order a replacement battery, visit our  
In Canada dial 1 (866) 288-4268.  
ƨꢀ ꢃŒ’‡‘Ž‘ƒ†ƒ’’ƒ—Œ‡ƒƓ‡‰ƒ’†ƒ’’ƒ‡ƒ‘†‡‘—ŽƒƐ“Š‚ƒ–ŽŠ‚ƒ„ꢀ  
burned. Check with local codes for special disposal instructions.  
ƨꢀ ꢃꢀŒ’ꢀŽƒŒꢀꢀ‹“’‡Š’ƒꢀ’†ƒꢀ€’’ƒ—ƓꢀꢅƒŠƒ‘ƒ‚ꢀƒŠƒ’Š—’ƒꢀ‡‘ꢀ‘‡”ƒꢀŒ‚ꢀ‹—ꢀ“‘ƒꢀ‚‹ꢂƒꢀ  
’ꢀ’†ƒꢀƒ—ƒ‘ꢀꢀ‘‰‡ŒƓꢀꢆ’ꢀ‹—ꢀ€ƒꢀ’–‡ꢀ‡„ꢀ‘•ŠŠ•ƒ‚Ɠ  
ƨꢀ ꢇ–ƒ‡‘ƒꢀƒꢀ‡Œꢀ†Œ‚Š‡Œꢂꢀ€’’ƒ‡ƒ‘ꢀ‡Œꢀ‚ƒꢀŒ’ꢀ’ꢀƒ’ƒꢀꢀ‘†’ꢀ‡“‡’ƓꢀꢃꢀŒ’ꢀŠŠ•ꢀŒ‚“-  
tive materials such as rings, bracelets, or keys to touch the battery. The battery or conductor  
may overheat and cause harm.  
ƨꢀ ꢈ†ꢂƒ†ƒ’’ƒ—Ž”‡‚ƒ‚‡’†‚ƒŒ’‡„‡ƒ‚‘ƒ‡’††‡‘Ž‚“’ŒŠ—Œ‚Œƒꢀ  
with the instructions and limitations specified in this manual.  
ƨꢀ ꢉ€‘ƒ”ƒꢀŽŽƒꢀŽŠ‡’—ꢀ‡ƒŒ’’‡Œꢀ€ƒ’•ƒƒŒꢀ’†ƒꢀ€’’ƒ—ꢀŒ‚ꢀ€’’ƒ—ꢀ†ꢂƒƓ  
ƨꢀ ꢃꢀŒ’ꢀ‚‡‘‘‘ƒ‹€Šƒꢀ—“ꢀ’ƒŠƒŽ†ŒƒƓꢀꢊ†ƒƒꢀƒꢀŒꢀ“‘ƒƕ‘ƒ”‡ƒ€ŠƒꢀŽ’‘ꢀ‡Œ‘‡‚ƒƓꢀꢅƒ„ƒꢀ’ꢀ“Š‡-  
fied service personnel for servicing.  
User’s manual  
E5812B/E5813B/E5814B/  
E1812B/E1813B/E1814B  
5.8 GHz cordless telephone/  
answering system with  
caller ID/call waiting  
Table of contents  
Getting started  
Answering system operation  
Answering system operation.........33  
ꢃ—ꢀſꢀ’‡‹ƒꢀŒŒ“Œƒ‹ƒŒ’..........34  
ꢉ“’ꢂ‡ŒꢂꢀŒŒ“Œƒ‹ƒŒ’‘..............35  
Changing feature options...............36  
Message playback...............................37  
ꢅƒ‚‡Œꢂꢀ& playing memos.........38  
Message counter displays..............39  
Answering system mode.................40  
ꢅƒ‹’ƒꢀƒ‘.....................................41  
Quick reference guide......................2  
Parts checklist......................................4  
Telephone base installation...........5  
Battery installation & charging....7  
Installation options............................8  
Belt clip & optional headset............10  
Telephone operation  
Settings.................................................11  
Basic operation.................................14  
ꢉŽ’‡Œ‘ꢀ•†‡ŠƒꢀŒꢀŠŠ‘...................17  
Call transfer for E5812B/E1812B......18  
Call transfer for E5813B/E1813B......19  
Call transfer for E5814B/E1814B......20  
Appendix  
Screen icons, indicator lights  
& tones.............................................42  
Handset display screen messages...43  
Troubleshooting................................45  
Important safety instructions......51  
FCC Part 68 & ACTA........................54  
FCC Part 15.........................................55  
ꢄ‡‹‡’ƒ‚ꢀ•Œ’—...............................56  
Technical specifications.................59  
ꢆŒ‚ƒ– ......................................................60  
ꢅƒ‹’ƒꢀƒ‘‘ꢀ•ŠŠƒ’ꢀ..........61  
Directory  
ꢃ‡ƒ’—...............................................21  
Speed dial............................................22  
New directory entries....................23  
ꢃ‡ƒ’—ꢀ‘ƒ† ...............................25  
To change or dial entries................26  
Caller ID summary  
ꢈŠŠƒꢀꢆꢃ“‹‹— ...........................27  
To review the call summary.......30  
ꢃƒŠƒ’ƒꢀŠŠꢀ‘“‹‹—ꢀƒŒ’‡ƒ......31  
Add entries to the directory.......32  
1
Getting started  
Quick reference guide  
Cordless handset  
DIR /VOLUME+  
CID/-VOLUME  
While in a menu, press to scoll up.  
When in idle mode, press to dis-  
play directory entries (page 25).  
While entering names, press to  
advance ’†ƒ“‘Ɠ“‡ŒꢂŠŠƐꢀ  
While in a menu, press to scoll  
down. When in idle mode, press  
to display call summary entries  
(page 30). While entering names  
or numbers, press to move the  
“‘ꢀ ’ꢀ ’†ƒꢀ Šƒ„’Ɠꢀ ꢃ“‡Œꢂꢀ ꢀ ŠŠƐꢀ  
press CID to decrease listening  
volume.  
press DIR  
to increase listening  
volume.  
OFF/CLEAR  
PHONE/FLASH  
ꢃ“‡ŒꢂꢀꢀŠŠƐꢀŽƒ‘‘ꢀ’ꢀ†Œꢂꢀ“ŽƓ  
While using menus, press to can-  
ƒŠꢀŒꢀŽƒ’‡ŒƐꢀꢀƒ–‡’ꢀ’†ƒꢀ‹ƒŒ“ꢀ  
(page 12).  
Press to make or answer a call.  
ꢃ“‡Œꢂꢀ ꢀ ŠŠƐꢀ Žƒ‘‘ꢀ ’ꢀ ƒƒ‡”ƒꢀ  
an incoming call if call waiting is  
activated (page 17).  
CHAN/DELETE  
MENU/SEL/TRANSFER  
When on a call, press CHAN/DELETE  
to scan for a clearer channel when  
there is static or interference on  
the line (page 17). When in caller  
ꢆꢃꢀ ‹‚ƒƐꢀ Žƒ‘‘ꢀ ’ꢀ ‚ƒŠƒ’ƒꢀ ’†ƒꢀ ‚‡‘-  
ŽŠ—ƒ‚ꢀŠŠƒꢀꢆꢃꢀƒŒ’—ꢀƪŽꢂƒꢀǏǍƫƐꢀꢀ  
press and hold to delete all caller  
ꢆꢃꢀƒŒ’‡ƒ‘ꢀƪŽꢂƒꢀǏǍƫƓ  
Press to display a menu or to con-  
„‡‹ꢀ ꢀ ‹‹Œ‚Ɠꢀ ꢃ“‡Œꢂꢀ ꢀ ŠŠƐꢀ  
press to transfer a call between  
handsets (pages 18 - 20).  
MUTE  
While on a call, press to mute  
microphone. Press again to resume  
(page 17).  
SPEAKER  
REDIAL/PAUSE  
Press to activate handset speak-  
erphone. Press again to resume  
normal handset use (page 14).  
While in idle mode, press to display  
last number called (page 15). While  
dialing or entering numbers to the  
directory, press to insert a four-sec-  
ond dialing pause (page 24).  
Feature menu  
Feature menu  
Using menus  
$)2%#4/29  
ꢃꢆꢅꢇꢈꢊꢉꢅꢋ ..............Page 21  
ꢌꢍꢇꢇꢃꢀꢃꢆɇꢄ .............Page 22  
ꢅꢆꢎꢏꢇꢅ......................Page 12  
ꢃɇꢊꢇƤꢊꢆꢐꢇ ...............Page 12  
ꢃꢆɇꢄꢀꢐꢉꢃ..............Page 11  
ꢄɇꢎꢏꢁɇꢏꢇ ..............Page 11  
Press  
through menu items.  
CID or DIR  
to scroll  
Press MENU/SEL to select or  
modify a highlighted item.  
Press  
OFF/CLEAR to cancel an  
Žƒ’‡ŒƐꢀ ꢀ ƒ–‡’ꢀ ’†ƒꢀ ‹ƒŒ“ꢀ ‚‡‘-  
play.  
2
Getting started  
Quick reference guide  
Telephone base  
CHARGE/IN USE  
ƨꢀꢀ ꢑŠ‘†ƒ‘ꢀ•†ƒŒꢀŒƒꢀ„ꢀ’†ƒꢀ†Œ‚-  
sets is in use.  
ƨꢀꢀ ꢑŠ‘†ƒ‘ꢀ •†ƒŒꢀ ’†ƒꢀ Œ‘•ƒ‡Œꢂꢀ  
system is answering an incom-  
ing call.  
HANDSET LOCATOR  
ƨꢀꢀ ꢑŠ‘†ƒ‘ꢀ“‡‰Š—ꢀ•†‡ŠƒꢀŒꢀ‡Œ‹-  
Press to make the hand-  
sets beep when there is no  
handset on the telephone  
base (page 16).  
ing call is ringing.  
ƨꢀꢀ ꢉŒꢀ‘’ƒ‚—ꢀ•†ƒŒꢀ’†ƒꢀ†Œ‚‘ƒ’ꢀ‡‘ꢀ  
properly positioned to charge  
in the telephone base.  
SETUP  
ANNC.  
Press to review or change  
answering system options  
(page 36).  
Press to review or record  
announcement; press  
again to quit (page 35).  
MESSAGE COUNTER  
Number of messages (or  
during playback, message  
number currently playing).  
RECORD  
Press to record a memo  
(page 38) or after press-  
ing ANNC. to record an  
outgoing announcement  
(page 35).  
CLOCK  
Press to review or set clock  
(page 34).  
DELETE  
Press to delete message  
currently playing; press and  
hold to delete all old mes-  
sages (page 37).  
ANSWER ON  
Press to turn answering  
system on or off (page  
40).  
REPEAT  
VOLUME  
Press to repeat message;  
press twice to play previous  
message (page 37).  
Press to adjust playback  
volume (page 37).  
SKIP  
PLAY/STOP  
Press to skip message  
(page 37).  
Press to start or stop mes-  
sage playback (page 37).  
3
Getting started  
Parts checklist  
Save your sales receipt and original packaging in case it is necessary to ship  
your telephone for warranty service.  
Check to make sure the telephone package includes the following. The model  
number of your telephone can be found on the label located on the bottom  
of the telephone base.  
User’s manual  
Quick start guide  
E5812B/E5813B/E5814B/  
E1812B/E1813B/E1814B  
5.8 GHz cordless telephone/  
answering system with  
caller ID/call waiting  
E5812B/E5813B/E5814B/  
E1812B/E1813B/E1814B  
5.8 GHz cordless telephone/  
answering system with  
caller ID/call waiting  
User's manual  
Quick start guide  
Cordless handset  
Telephone base  
(2 for E1812B/E5812B)  
(3 for E1813B/E5813B)  
(4 for E1814B/E5814B)  
Charger for cordless handset  
(1 for E1812B/E5812B)  
(2 for E1813B/E5813B)  
(3 for E1814B/E5814B)  
Battery for cordless handset  
Battery compartment cover  
(2 for E1812B/E5812B)  
(3 for E1813B/E5813B)  
(4 for E1814B/E5814B)  
(2 for E1812B/E5812B)  
(3 for E1813B/E5813B)  
(4 for E1814B/E5814B)  
Power adapter  
for telephone  
base  
Power adapter for  
handset charger  
(1 for E1812B/E5812B)  
(2 for E1813B/E5813B)  
(3 for E1814B/E5814B)  
Belt clip for cordless  
handset  
(2 for E1812B/E5812B)  
(3 for E1813B/E5813B)  
(4 for E1814B/E5814B)  
Telephone line cord  
4
Getting started  
Telephone base installation  
Choose a central location close to a telephone jack and a power outlet not  
connected to a wall switch. The telephone base can be placed on a flat sur-  
face or mounted on a standard wall plate. For optimum range and better  
reception, place the telephone base in a high and open location.  
Avoid placing the telephone base too close to:  
ƨꢀ ꢈ‹‹“Œ‡’‡Œꢀ ‚ƒ”‡ƒ‘ꢀ ‘“†ꢀ ‘ƒꢀ Žƒ‘ŒŠꢀ ‹Ž“’ƒ‘Ɛꢀ ‹Ž“’ƒꢀ “’ƒ‘Ɛꢀ  
’ƒŠƒ”‡‘‡Œꢀ‘ƒ’‘Ɛꢀꢒꢈꢅ‘Ɛꢀ•‡ƒŠƒ‘‘ꢀ“’ƒ‘ꢀƪ•‡ƒŠƒ‘‘ꢀ€‚€Œ‚Ɛꢀ•‡ƕ„‡ƐꢀꢀǔnjǎƓǍǍƫꢀ  
or other cordless telephones.  
ƨꢀꢀꢇ–ƒ‘‘‡”ƒꢀ†ƒ’ꢀ‘“ƒ‘Ɠ  
ƨꢀꢀꢎ‡‘ƒꢀ ‘“ƒ‘ꢀ ‘“†ꢀ ‘ꢀ ꢀ •‡Œ‚•ꢀ •‡’†ꢀ ’„„‡ꢀ “’‘‡‚ƒƐꢀ ‹’‘Ɛꢀ ‹‡•”ƒꢀ  
ovens, refrigerators, or fluorescent lighting.  
ƨꢀꢀꢇ–ƒ‘‘‡”ƒꢀ‚“‘’ꢀ‘“ƒ‘ꢀ‘“†ꢀ‘ꢀꢀ•‰‘†ŽꢀꢀꢂꢂƒƓ  
ƨꢀꢀꢇ–ƒ‘‘‡”ƒꢀ‹‡‘’“ƒƓ  
ƨꢀꢀꢇ–’ƒ‹ƒŠ—ꢀŠ•ꢀ’ƒ‹Žƒ’“ƒƓ  
ƨꢀꢀꢐƒ†Œ‡Š‡€’‡Œ†‰“†ŒŽ†ƒ‘†‡Œꢂ†‡Œƒꢀ  
work bench.  
5
Getting started  
Telephone base installation  
1. Plug the small end of  
the larger power adapter  
into the power jack at  
the bottom of the tele-  
phone base.  
2. Plug one end of the  
telephone line cord into  
the telephone jack at the  
bottom of the telephone  
base.  
3.ꢀ ꢅ“’ƒꢀ ‚‘ꢀ ’†“ꢂ†ꢀ  
slots.  
ꢃꢌꢄꢀ„‡Š’ƒꢀ  
ƪꢉŽ’‡ŒŠꢀ„ꢀꢃꢌꢄꢀ“‘ƒ‘Ɛꢀ  
see number four in the  
note section, below.)  
4. Plug the large end of  
the larger power adapter  
into an electrical outlet  
not controlled by a wall  
switch.  
Telephone line cord  
5. Plug the other end  
of the telephone line  
cord into a telephone  
jack.  
NOTES:  
1. Use only the power adapter supplied with this product or equivalent. To order a replace-  
or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.  
2. Be sure to use an electrical outlet not controlled by a wall switch.  
3. This power adapter is intended to be correctly oriented in a vertical or floor mount position.  
ǐƓꢀ ꢆ„ꢀ—“ꢀƒƒ‡”ƒꢀ†‡ꢂ†ꢀ‘Žƒƒ‚ꢀ‡Œ’ƒŒƒ’ꢀ’†“ꢂ†ꢀ—“ꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀƪ‹‹ŒŠ—ꢀƒ„ƒƒ‚ꢀ’ꢀ‘ꢀꢃꢌꢄƫƐꢀŒ‚ꢀ  
—“ƒƒ–Žƒ‡ƒŒ‡ŒꢂŒ’ƒ„ƒƒŒƒ“‡ŒꢂƒŠƒŽ†ŒƒŒ”ƒ‘’‡Œ‘Œ‚Ƥ“ŠŠƒƒ’“ƒ‘ꢀ  
ƒꢀŒ’ꢀ„“Œ’‡Œ‡ŒꢂꢀŽŽƒŠ—Ɛꢀ‡Œ‘’ŠŠꢀꢀꢃꢌꢄꢀ„‡Š’ƒꢀ’ꢀ’†ƒꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀ€ƒ’•ƒƒŒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ  
Œ‚ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ•ŠŠꢀˆ‰ƓꢀꢈŒ’’ꢀ—“ꢀꢃꢌꢄꢀ‘ƒ”‡ƒꢀŽ”‡‚ƒꢀ„ꢀꢀꢃꢌꢄꢀ„‡Š’ƒƓꢀ  
6
Getting started  
Battery installation & charging  
After installing the battery, you may be able to make or receive short calls. For  
best performance, place the handset in the telephone base or charger to charge  
for 16 hours before use.  
You can keep the battery charged by returning the handset to the telephone base  
or charger after use. When the battery is fully depleted, a recharge takes about 12  
hours. The average talk time on a fully charged battery is about five hours, and the  
‘’Œ‚€—ꢀ’‡‹ƒꢀ‡‘ꢀŽŽ–‡‹’ƒŠ—ꢀ‘‡–ꢀ‚—‘Ɠꢀɇ’“Šꢀ€’’ƒ—ꢀŠ‡„ƒꢀ‚ƒŽƒŒ‚‘ꢀŒꢀ“‘ꢂƒꢀŒ-  
ditions and age of battery.  
1. Plug the small end of 2. Plug the large  
the smaller power adapter end of the smaller  
into the jack on the under- power adapter into  
side of the charger, then an electrical outlet  
route the cord through the not controlled by a  
slot as shown.  
wall switch.  
3. Insert the plug as indicat-  
ed. Be sure to securely insert  
the plug, making sure that it  
matches the color-coded label  
inside the battery compart-  
ment.  
4. Place the bat-  
tery and wires  
inside the com-  
partment.  
5. Slide the bat-  
tery compart-  
ment cover up  
until it clicks.  
6. You may be able to make or receive  
short calls. For best performance, place the  
handset in the telephone base or charger to  
charge for at least 16 hours before first use.  
To replace the battery,  
press in and downward  
on the tab of the bat-  
tery compartment to  
open the battery com-  
Ž’‹ƒŒ’ꢀ ”ƒƓꢀ ꢄ‡„’ꢀ  
out the old battery  
and disconnect it from  
the handset. Follow  
the instructions on  
this page to install and  
charge the new battery.  
"!44%29ꢀ,/7  
ꢈꢈꢀꢁꢀꢈꢈ  
.%%$3ꢀ2%#(!2').'  
then  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
Battery low indicator  
ꢅƒ’“Œꢀ ’†ƒꢀ †Œ‚‘ƒ’ꢀ ’ꢀ ’†ƒꢀ  
telephone base or charger  
to recharge when this sym-  
bol flashes and the handset  
beeps or when the hand-  
set screen displays NEEDS  
RECHARGING.  
NOTE: Under normal conditions, the  
battery should last around one year. This  
may vary depending on usage.  
Caution: Use only the supplied rechargeable battery, replacement battery 2422 (SKU 23402, part  
number 89-0047-00-00) or equivalent. To order a replacement battery, visit our  
Canada dial 1 (866) 288-4268.  
7
Getting started  
Installation options  
NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions.  
Tabletop mount  
Wall mount  
Telephone outlet  
mounting plate  
with mounting  
studs  
Wall mounting  
The telephone base comes with the bracket mounted for tabletop use. If wall  
mounting is desired, a telephone outlet wall mounting plate with mounting studs is  
required. This mounting plate with studs may be available for purchase from many  
hardware or consumer electronics retailers and may require professional installation.  
1. To remove the bracket, hold the telephone  
base in both hands, press the two bracket  
tabs and lift the bracket away from slots  
2. Connect the telephone line cord and power  
adapter to the jacks on the bottom of the  
telephone base. Bundle the telephone cord,  
and secure it with a twist tie before placing it  
inside the bracket.  
and  
.
8
Getting started  
Installation options  
3. To attach the bracket for wall mounting, insert  
the tabs of the bracket into slots  
telephone base, then press the other bracket tabs  
into slots and as shown on the right.  
and  
on the  
4. Plug the power adapter into an electrical outlet  
not controlled by a wall switch. Plug the telephone  
line cord into a telephone wall jack. To mount the  
telephone on the wall, position the mounting holes  
and  
over the telephone outlet mounting  
studs. Press and slide the bracket down firmly so  
the telephone is held securely on the telephone  
outlet mounting studs.  
Telephone outlet mounting studs  
Tabletop mounting  
To return the bracket from the wall mount to tabletop position, follow the  
directions below.  
ǍƓꢀ ꢅƒ‹”ƒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ„‹ꢀ’†ƒꢀ•ŠŠƓꢀꢁŒŽŠ“ꢂꢀ  
’†ƒꢀ‚‘ꢀ„‹ꢀ’†ƒꢀ•ŠŠꢀˆ‰‘Ɠꢀꢅƒ‹”ƒꢀ’†ƒꢀ€‰ƒ’ꢀ  
from the telephone base.  
2. Insert the bracket tabs into slots  
and on the telephone base, then  
press the other bracket tabs into  
slots and  
.
ǏƓꢀꢀꢅ“’ƒꢀ‚‘ꢀ’†“ꢂ†ꢀ‘Š’‘ƓꢀꢍŠ“ꢂꢀ’†ƒꢀ’†ƒꢀƒŒ‚ꢀ  
of the telephone line cord into a telephone  
wall jack. Plug the large end of the larger  
power adapter into an electrical outlet not  
controlled by a wall switch.  
9
Getting started  
Belt clip & optional headset  
Install belt clip as shown below if desired.  
Snap belt clip  
into notches  
on both sides  
of handset.  
To release belt clip  
from handset, lift one  
side of the belt clip  
out of the notch.  
For hands-free telephone conversations, use any industry standard 2.5 mm  
headset (purchased separately). For best results, use an AT&T 2.5 mm  
headset. To order an AT&T 2.5 mm headset, visit our website at  
dial 1 (866) 288-4268.  
Plug 2.5 mm headset into  
the jack on the side of hand-  
set (beneath small rubber  
cap).  
NOTE: If the sound quality of  
the headset is not good, try unplug-  
ging it, and firmly plugging it in again.  
10  
Telephone operation  
Settings  
Each cordless handset operates individually from  
the other handsets. The ringer sound, ringer vol-  
ume, date and time, dial mode and language  
must be programmed separately for each cord-  
less handset. Follow the steps below to program  
the cordless handset. To stop at any time, press  
OFF/CLEAR.  
Language  
The default language for the handset screen  
displays is English. To change the language to  
Espanol, or Francais:  
,!.'5!'%  
1. Press MENU/SEL.  
2. Press CID or DIR  
until the screen displays  
LANGUAGE  
.
3. Use MENU/SEL to change the current setting.  
4. Press CID or DIR to choose among ENGLISH,  
FRANCAIS, or ESPANOL.  
5. Press MENU/SEL to confirm your selection and  
ƒ–‡’Ɠ  
Choose dial mode  
The dial mode defaults to tone. If you do not have  
touch tone service, you’ll need to change the set-  
ting to pulse:  
1. Press MENU/SEL.  
$)!,ꢀ-/$%ꢃꢀ4/.%  
2. Press CID or DIR  
until the screen displays  
DIAL MODE: and the current setting.  
3. Use MENU/SEL to change the current setting.  
4. Press CID or DIR  
to display TONE or PULSE.  
5. Press MENU/SEL to confirm your selection and  
ƒ–‡’Ɠ  
11  
Telephone operation  
Settings  
Selectalbe ringer melodies  
1. Press MENU/SEL to begin programming.  
2. Press CID or DIR  
until the screen displays  
RINGER: and the current setting.  
2).'%2ꢃꢀꢁ  
3. Use MENU/SEL to change the current setting.  
4. Press CID or DIR  
to display 1, 2, 3, 4 or OFF.  
You will hear a sample of each ringer sound.  
5. Press MENU/SEL to choose displayed ringer  
‘“Œ‚ꢀŒ‚ꢀƒ–‡’Ɠ  
NOTE: If you choose OFF, the cordless handset ringer will  
be turned off, and the screen will display RINGER OFF and  
when the cordless handset is idle (not in use). If there are any  
un-reviewed calls, the screen will display XX MISSED CALLS  
and  
instead of RINGER OFF and  
.
Set cordless handset display date and time  
1. Press MENU/SEL to begin programming.  
$!4%ꢆ4)-%  
ꢁꢂꢃꢂꢄ  
2. Press CID or DIR  
until the screen displays  
DATE/TIME  
.
3. Press MENU/SEL to view or set date and time.  
4. Press CID or DIR to change the month in the  
ꢂꢅꢆꢁꢇ  
date and time line at the bottom of the display,  
NOTES:  
then press MENU/SEL.  
1.  
You can choose to set the  
time manually, or you can  
allow it to be set automatically  
•‡’†ꢀ ‡Œ‹‡Œꢂꢀ ŠŠƒꢀ ꢆꢃꢀ ‡Œ„-  
mation. The time will be set  
automatically only if you sub-  
‘‡€ƒꢀ’ꢀŠŠƒꢀꢆꢃꢀ‘ƒ”‡ƒꢀŽ-  
vided by your local telephone  
company (page 27). The date  
and time for the answering  
machine need to be set sepa-  
rately (page 34).  
ǑƓꢀꢅƒŽƒ’ step four to set day, hour, minute, and  
AM/PM.  
6. Press MENU/SEL ’ꢀ‘”ƒꢀ‘ƒŠƒ’‡ŒꢀŒ‚ꢀƒ–‡’Ɠ  
2.  
ꢈŠŠƒꢀꢆꢃꢀ•‡ŠŠꢀŒ’ꢀ‘ƒ’ꢀ’†ƒꢀ—ƒƓꢀ  
See page 34 for instructions  
on how to set the year.  
12  
Telephone operation  
Settings  
Choose ringer volume setting  
1. Press and hold CID or DIR  
when the cordless  
2).'%2ꢀ6/,ꢃꢀ,/7  
handset is idle (not in use). This feature allows  
you to choose low, med, high ringer volume or  
turn the ringer off.  
2. Press  
CID or DIR  
to choose the desired  
option. You will hear a sample of each ringer  
volume.  
3. Press MENU/SEL to choose blinking ringer vol-  
“‹ƒꢀŒ‚ꢀƒ–‡’Ɠ  
NOTE: If you choose OFF, the cordless handset ringer  
will be turned off, and the screen will display RINGER OFF and  
when the cordless handset is idle (not in use). If there are  
any un-reviewed calls, the screen will display XX MISSED  
CALLS and  
instead of RINGER OFF and  
.
13  
Telephone operation  
Basic operation  
Making and answering calls  
ꢊꢀŒ‘•ƒꢀŒꢀ‡Œ‹‡ŒꢂꢀŠŠƐꢀŽƒ‘‘ꢀŒ—ꢀ‰ƒ—‘ꢀƪƒ–ƒŽ’ꢀ  
Elapsed  
time  
0(/.%ꢀ/.ꢀꢀꢀꢀꢂꢂꢃꢊꢂ  
CID, DIR  
and  
OFF/CLEAR). To make a call,  
press PHONE/FLASH or SPEAKER, then dial a  
number. Press OFF/CLEAR to hang up.  
To predial (preview numbers before dialing),  
enter numbers first, then press PHONE/FLASH or  
SPEAKER to dial. Press CID then CHAN/DELETE  
anytime to make corrections when entering num-  
bers.  
The screen displays the elapsed time of the current  
call (in hours, minutes and seconds).  
NOTE: ꢉŒŠ—ꢀ Œƒꢀ ‚-  
less handset can be on a call  
at a time. If another cordless  
handset attempts to join a  
call, its screen will display  
OTHER HANDSET ON and  
then OR OUT OF RANGE.  
NOTES:  
1. The elapsed time format is in minutes and seconds  
MM:SS until one hour has elapsed, then it will change to  
hours, minutes and seconds H:MM:SS.  
2. Pressing PHONE/FLASH to access service from your local  
telephone service provider will not affect the elapsed time.  
The elapsed time will not be carried over to the other cord-  
less handset on a transferred call.  
30%!+%2ꢀꢀꢀꢀꢀꢀꢂꢂꢃꢇꢉ  
Hands-free speakerphone calls  
To answer a call, press  
SPEAKER. To make  
a call, press SPEAKER, then dial a number.  
ꢃ“‡ŒꢂꢀꢀŠŠꢀŽƒ‘‘ꢀ SPEAKER to switch between  
hands-free speakerphone and normal handset  
use. Press OFF/CLEAR to hang up.  
NOTE: If a headset is plugged into the handset, the handset  
speakerphone will be disabled.  
14  
Telephone operation  
Basic operation  
Last number redial  
While the telephone is not in use, press REDIAL/  
PAUSE on the cordless handset to display the last  
number called (up to 32 digits). To dial the number  
displayed, press PHONE/FLASH or SPEAKER.ꢀꢉƐꢀ  
after pressing PHONE/FLASH or SPEAKER, press  
REDIAL/PAUSE to call the last number dialed.  
To delete this number, press REDIAL/PAUSE twice  
when the telephone is not in use. This will clear  
the redial memory and leave it blank.  
ꢅ‡Œꢂƒꢀ  
silenced  
Press OFF/CLEARꢀ’ꢀƒ–‡’Ɠ  
Temporary ring silencing  
Press OFF/CLEAR while the telephone is ringing  
to silence the ringer temporarily. This will silence  
the ringer without disconnecting the call. You can  
answer the call or let the caller leave a message  
Œ†ƒŒ‘•ƒ‡Œꢂ—‘’ƒ‹Ɠ†ƒŒƒ–’Œ‹‡ŒꢂŠŠꢀ  
will ring normally.  
ꢅƒ‚‡Š  
15  
Telephone operation  
Basic operation  
Handset locator  
If you misplace the handset(s), press  
HANDSET  
LOCATOR on the telephone base. This starts the  
paging tone at the handset(s) for 60 seconds to  
help you locate it/them. To stop the paging tone,  
press OFF/CLEAR on cordless handset, or place  
cordless handset in the telephone base, the tele-  
phone base, or press the  
on the telephone base.  
HANDSET LOCATOR  
ꢋꢋꢀ0!').'ꢀꢋꢋ  
NOTES:  
1. Pressing  
OFF/CLEAR on any cordless handset will cancel  
the page of that specific handset.  
2. If one of the cordless handsets is charging in the base, press-  
ing HANDSET LOCATOR does not generate a paging tone.  
16  
Telephone operation  
Options while on calls  
Volume control  
Press CID/-VOLUME to decrease the volume.  
Press DIR /VOLUME+ to increase the volume.  
When changing the volume level, the new setting  
is saved.  
6/,5-%  
Call waiting  
If you subscribe to call waiting service with your  
local telephone company, there will be a beep if  
there is an incoming call while you are already on a  
call. Press PHONE/FLASH to put your current call  
on hold and take the new call. Press PHONE/FLASH  
anytime to switch back and forth between calls. For  
‹ƒꢀ‡Œ„‹’‡ŒꢀŒꢀŠŠƒꢀꢆꢃƐꢀ‘ƒƒꢀŽꢂƒꢀǏnjƓ  
Mute  
Press MUTE to silence the microphone. When mute  
is on, MICROPHONE MUTED will show on the  
handset screen. You will be able to hear the caller,  
but the caller will not be able to hear you until you  
press MUTE again and resume speaking. When the  
mute function is turned off, MICROPHONE ON will  
show temporarily on the handset screen.  
Temporary tone dialing  
If dial pulse (rotary) is selected, you can switch  
to touch tone dialing during a call by pressing  
TONE . This can be useful if it is necessary to  
send t  
*
one signals for access to answering systems  
Tone  
or long-distance services.  
After you hang up or press PHONE/FLASH (to  
receive a call waiting call), the telephone auto-  
matically returns to dial pulse (rotary) service.  
Mute  
Channel  
Channel selection  
ꢃ“‡ŒꢂꢀꢀŠŠƐꢀ‡„ꢀ—“ꢀ†ƒꢀŠ‡‰‘ꢀŒ‚ꢀŽŽ‘Ɛꢀꢀ‡„ꢀ’†ƒꢀ  
speech sometimes fades, press CHAN/DELETE on  
the handset to scan for a clearer radio channel  
between cordless handset and base.  
17  
Telephone operation  
Call transfer for E5812B/E1812B  
Call transfer  
ꢃ“‡ŒꢂꢀꢀŒ”ƒ‘’‡ŒƐꢀ—“ꢀŒꢀ’Œ‘„ƒꢀ’†ƒꢀŠŠꢀ’ꢀ  
another cordless handset.  
ƨ Press MENU/SEL/TRANSFERꢀ’ꢀ’Œ‘„ƒꢀ’†ƒꢀƒ–’ƒ-  
nal call to another cordless handset, your cord-  
less handset will display CALL TRANSFERRED  
and the other handset will begin ringing.  
ƨ To answer the call, press  
PHONE/FLASH or  
SPEAKER.  
NOTES:  
1. Before the transferred call is answered, the person at the  
originating handset can press  
toꢀŒƒŠꢀ’†ƒꢀ’Œ‘„ƒꢀŒ‚ꢀƒ‘“‹ƒꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠƓ  
PHONE/FLASH or  
SPEAKER  
2. If the transferred call is not answered within 30 seconds, the  
originating handset will start ringing and show TRANSFERRED  
CALL. If  
PHONE/FLASH or  
SPEAKER is not pressed within  
Œ’†ƒꢀǏnjꢀ‘ƒŒ‚‘Ɛꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠꢀ•‡ŠŠꢀƒŒ‚ꢀ“’‹’‡ŠŠ—Ɠ  
3. If the destination cordless handset cannot be found, the  
cordless handset that originated the transfer will generate  
Œꢀƒꢀ’ŒƒꢀŒ‚ꢀŒ’‡Œ“ƒꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠꢀ“’‹’‡ŠŠ—Ɠ  
4. This telephone does not have an intercom function. People  
using the cordless handsets cannot talk to each other.  
18  
Telephone operation  
Call transfer for E5813B/E1813B  
Call transfer  
ꢃ“‡ŒꢂꢀꢀŒ”ƒ‘’‡ŒƐꢀ—“ꢀŒꢀ’Œ‘„ƒꢀ’†ƒꢀŠŠꢀ’ꢀ  
another cordless handset.  
ƨ Press MENU/SEL/TRANSFER to transfer the  
ƒ–’ƒŒŠꢀ ŠŠꢀ ’ꢀ Œ’†ƒꢀ ‚Šƒ‘‘ꢀ †Œ‚‘ƒ’Ɠꢀ ꢊ†ƒꢀ  
handset will display ENTER 1-3. After enter-  
ing the cordless handset number to which you  
want to transfer the call, your cordless hand-  
set will display CALL TRANSFERRED and the  
selected handset will begin ringing.  
%.4%2ꢀꢁꢈꢊ  
ƨ To answer the call, press  
PHONE/FLASH or  
SPEAKER.  
NOTES:  
1. Before the transferred call is answered, the person at the  
originating handset can press  
’ꢀŒƒŠꢀ’†ƒꢀ’Œ‘„ƒꢀŒ‚ꢀƒ‘“‹ƒꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠƓ  
PHONE/FLASH or  
SPEAKER  
2. If the transferred call is not answered within 30 seconds, the  
originating handset will start ringing and show TRANSFERRED  
CALL. If  
PHONE/FLASH or  
SPEAKER is not pressed within  
Œ’†ƒꢀǏnjꢀ‘ƒŒ‚‘Ɛꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠꢀ•‡ŠŠꢀƒŒ‚ꢀ“’‹’‡ŠŠ—Ɠ  
3. If the destination cordless handset cannot be found, the  
cordless handset that originated the transfer will generate  
Œꢀƒꢀ’ŒƒꢀŒ‚ꢀŒ’‡Œ“ƒꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠꢀ“’‹’‡ŠŠ—Ɠ  
4. This telephone does not have an intercom function. People  
using the cordless handsets cannot talk to each other.  
19  
Telephone operation  
Call transfer for E5814B/E1814B  
Call transfer  
ꢃ“‡ŒꢂꢀꢀŒ”ƒ‘’‡ŒƐꢀ—“ꢀŒꢀ’Œ‘„ƒꢀ’†ƒꢀŠŠꢀ’ꢀ  
another cordless handset.  
ƨ Press MENU/SEL/TRANSFER to transfer the  
ƒ–’ƒŒŠꢀ ŠŠꢀ ’ꢀ Œ’†ƒꢀ ‚Šƒ‘‘ꢀ †Œ‚‘ƒ’Ɠꢀ ꢋ“ꢀ  
will see ENTER 1-4. After entering the cordless  
handset number to which you want to trans-  
fer the call, your cordless handset will display  
CALL TRANSFERRED and the selected handset  
will begin ringing.  
%.4%2ꢀꢁꢈꢇ  
ƨ To answer the call, press  
PHONE/FLASH or  
SPEAKER.  
NOTES:  
1. Before the transferred call is answered, the person at the  
originating handset can press  
’ꢀŒƒŠꢀ’†ƒꢀ’Œ‘„ƒꢀŒ‚ꢀƒ‘“‹ƒꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠƓ  
PHONE/FLASH or  
SPEAKER  
2. If the transferred call is not answered within 30 seconds, the  
originating handset will start ringing and show TRANSFERRED  
CALL. If  
PHONE/FLASH or  
SPEAKER is not pressed within  
Œ’†ƒꢀǏnjꢀ‘ƒŒ‚‘Ɛꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠꢀ•‡ŠŠꢀƒŒ‚ꢀ“’‹’‡ŠŠ—Ɠ  
3. If the destination cordless handset cannot be found, the  
cordless handset that originated the transfer will generate  
Œꢀƒꢀ’ŒƒꢀŒ‚ꢀŒ’‡Œ“ƒꢀ’†ƒꢀƒ–’ƒŒŠꢀŠŠꢀ“’‹’‡ŠŠ—Ɠ  
4. This telephone does not have an intercom function. People  
using the cordless handsets cannot talk to each other.  
20  
Directory  
Memory capacity  
Each cordless handset has its own directory. Each  
directory can store up to 30 entries (including nine  
speed dial locations). Each entry can contain a  
number up to 24 digits, and a name up to 15 let-  
ters long. A convenient search feature can help  
you find and dial numbers quickly (page 25).  
0!4ꢀ7),,)!-3  
ꢌꢌꢌꢁꢅꢊꢇ  
NOTE: Each cordless handset has its own directory. Making  
changes to the directory of one handset will not affect the direc-  
tories of the other handsets.  
Timeouts and error messages  
If you pause for too long while creating an entry,  
the procedure will time out and you will have to  
begin again.  
-%-/29ꢀ&5,,  
If all memory locations are in use, the screen  
will display MEMORY FULL. You will not be able  
’ꢀ ‘’ƒꢀ ꢀ Œƒ•ꢀ Œ“‹€ƒꢀ “Œ’‡Šꢀ Œꢀ ƒ–‡‘’‡Œꢂꢀ Œƒꢀ ‡‘ꢀ  
deleted.  
21  
ꢃ‡ƒ’—  
NOTE: The speed dial  
feature occupies up to nine of  
the thirty memory locations in  
’†ƒꢀ ‚‡ƒ’—Ɠꢀ ꢑꢀ ƒ–‹ŽŠƒƐꢀ ‡„ꢀ  
there are only five speed dial  
entries, then up to 25 entries  
can be stored in the directory.  
If there are already 30 entries  
in the directory, no new direc-  
tory and speed dial entries  
can be stored in memory until  
‘‹ƒ†ƒƒ–‡‘’‡ŒꢂŒƒ‘ƒꢀ  
deleted.  
Speed dial  
You can enter nine speed dial numbers of up to 24  
digits. Each number is stored in a one-digit speed  
dial location (1-9).  
The nine speed dial numbers on the handset will  
be automatically added to the handset directory.  
Press and hold a dial pad key and then press  
PHONE/FLASH or  
these telephone numbers. You can also make  
SPEAKER can easily dial  
ƒ–‡‘’‡Œꢂꢀ‚‡ƒ’—ꢀƒŒ’‡ƒ‘ꢀ‡Œ’ꢀ‘Žƒƒ‚ꢀ‚‡ŠꢀƒŒ’‡ƒ‘Ɠ  
MENU/SEL  
1.  
To enter a speed dial number  
1. Press MENU/SEL.  
2. Press CID or DIR until the screen displays  
$)2%#4/29  
SPEED DIAL  
.
3. Press MENU/SEL.  
2.  
3.  
CID or DIR  
4. Press the dial pad key to choose speed dial loca-  
tion (1-9).  
30%%$ꢀ$)!,  
5. Enter a name up to 15 characters (page 23), then  
press MENU/SEL.  
6. Enter a telephone number up to 24 digits (page  
MENU/SEL  
24), then press MENU/SEL.  
7. Choose distinctive ringing (yes or no) by press-  
ing CID or DIR . If you choose yes (and if you  
†”ƒŠŠƒƒ”‡ƒƫƐ‡„„ƒƒŒ’‡Œꢂ‡Œꢂ’—Šƒꢀ  
will alert you when this person calls.  
%.4%2ꢀꢁꢈꢉ  
8. Press MENU/SEL to store the number. You'll hear  
a confirmation tone.  
4.  
To call a speed dial number  
To use speed dialing, press and hold a dial pad  
button (1-9) to display the number and name  
stored in that speed dial location, then press  
PHONE/FLASH or SPEAKER to dial.  
%.4%2ꢀ.!-%  
ꢂꢁ  
(Pages 23-24).  
To edit or delete a speed dial number  
Press and hold a dial pad button (1-9) to display the  
NOTE: You can con-  
vert any directory entry into  
speed dial entry (page 26).  
entry you want. Press MENU/SEL, then press CID  
or DIR  
until the option you want is displayed  
(page 26).  
22  
ꢃ‡ƒ’—  
New directory entries  
NOTE: If all memory  
locations are in use, an error  
tone will sound when you  
attempt to enter a number.  
This means the memory is  
full, and you will not be able  
to store a new number until  
—“ꢀ‚ƒŠƒ’ƒꢀŒꢀƒ–‡‘’‡ŒꢂꢀŒƒƓ  
To enter a name  
ƨꢀꢀꢍƒ‘‘ꢀMENU/SEL twice.  
ƨꢀꢀꢊ†ƒꢀ‘ƒƒŒꢀ•‡ŠŠꢀ‘†•ꢀENTER NAME.  
ƨꢀꢀꢇŒ’ƒꢀ’†ƒꢀŒ‹ƒꢀƪ“Žꢀ’ꢀǍǑꢀŠŽ†Œ“‹ƒ‡ꢀ†-  
ters) of the person using the table below.  
ƨꢀꢀꢁ‘ƒꢀDIR ꢀ’ꢀ‚”Œƒꢀ’ꢀ’†ƒꢀŒƒ–’ꢀ‘Žƒꢀ’ꢀ’†ƒꢀ  
right, or use CID then CHAN/DELETE to delete a  
mistake.  
MENU/SEL  
1.  
$)2%#4/29  
ƨꢀꢀꢓ†ƒŒꢀ„‡Œ‡‘†ƒ‚ꢀƒŒ’ƒ‡Œꢂꢀ’†ƒꢀŒ‹ƒƐꢀŽƒ‘‘ꢀMENU/SEL  
.
Each press of a particular key causes characters to  
be displayed in the following order:  
MENU/SEL  
2.  
%.4%2ꢀ.!-%  
3.  
0!4ꢀ*/(.3/.?  
Options while entering names:  
ƨꢀꢀꢍƒ‘‘ꢀ DIR  
to move the cursor to the right.  
twice to enter a space.  
Press DIR  
ƨꢀ ꢍƒ‘‘ꢀ CID then CHAN/DELETE to erase letters if  
you make a mistake.  
ƨꢀꢀꢍƒ‘‘ꢀ# repeatedly to enter an ampersand (&),  
apostrophe ('), comma (,) hyphen (-), period (.),  
or pound sign (#).  
ƨꢀꢀꢓ†ƒŒꢀ„‡Œ‡‘†ƒ‚ƐꢀŽƒ‘‘ꢀMENU/SEL.  
23  
ꢃ‡ƒ’—  
New directory entries  
MENU/SEL  
4.  
5.  
To enter a number  
Use the dial pad to enter up to 24 digits. When  
the number is complete, press MENU/SEL.  
%.4%2ꢀ.5-"%2  
Options while entering numbers:  
ƨꢀ ꢍƒ‘‘ꢀ CID then CHAN/DELETE to erase digits if  
you make a mistake.  
ƨꢀꢀꢍƒ‘‘ꢀREDIAL/PAUSE to enter a four-second dialing  
pause. A 0 will be inserted.  
024ꢀ*/(.3/.  
ꢌꢌꢌꢍꢎꢄꢉ?ꢀ  
ƨꢀ ꢓ†ƒŒꢀ „‡Œ‡‘†ƒ‚ꢀ ƒŒ’ƒ‡Œꢂꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ Œ“‹€ƒƐꢀ  
press MENU/SEL to confirm.  
MENU/SEL  
6.  
7.  
To assign a distinctive ring  
Press CID or DIR  
to select Y (if you want to  
$)34).#4ꢀ2).'ꢏꢀ.  
ꢌꢌꢌꢍꢎꢄꢉ  
assign a distinctive ring tone) or N (for a normal  
ring pattern). If you choose yes (and if you have  
ŠŠƒꢀꢆꢃꢀ‘ƒ”‡ƒƫƐꢀꢀ‚‡„„ƒƒŒ’ꢀ‡Œꢂ‡Œꢂꢀ‘’—Šƒꢀ•‡ŠŠꢀŠƒ’ꢀ  
you when this person calls.  
MENU/SEL  
Press MENU/SEL to choose the desired option  
and store this entry in the directory.  
D
A
appears in the display of each entry that has  
been assigned a distinctive ring.  
24  
ꢃ‡ƒ’—  
Directory search  
Follow the steps on the left to browse through the  
directory or search to find a specific entry. You can  
press OFF/CLEAR Œ—’‡‹ƒꢀ’ꢀƒ–‡’ꢀ’†ƒꢀ‚‡ƒ’—Ɠ  
To browse through the directory  
DIR  
1.  
2.  
To browse, press DIR then press CID or DIR  
to scroll through all entries one by one.  
$)2%#4/29  
A
appears in the display of each entry that has  
D
been assigned a distinctive ring (page 24).  
DIR  
NOTE: When reviewing directory entries, all entries  
(including those in the directory and in the speed dial) are dis-  
played in alphabetical order. The entries in the speed dial are  
identified by its speed dial number (01-09) in the lower right  
corner of the screen.  
!$!-  
ꢌꢌꢌꢁꢅꢊꢇ  
To display first entry  
To search alphabetically  
DIR  
To shorten your search, press DIR then use the  
telephone dial pad to enter the first letter of a  
name, then press DIR to scroll forward until you  
find the desired name.  
"%4(ꢀ  
ꢌꢌꢌꢇꢊꢅꢁ  
If you have more than one name entry that begin  
with the same letter, it is necessary to scroll through  
all the names beginning with that letter before see-  
‡ŒꢂꢀŒ‹ƒ‘ꢀ’†’ꢀ€ƒꢂ‡Œꢀ•‡’†ꢀ’†ƒꢀŒƒ–’ꢀŠƒ’’ƒƓ  
To scroll name by  
name  
-OR-  
Press dial pad buttons once for the first letter, twice  
for the second, three times for the third, as shown  
on page 23.  
5
*/(.  
ꢌꢌꢌꢂꢁꢅꢊ  
ꢑƒ–‹ŽŠƒƐꢀ‡„ꢀ—“ꢀ†”ƒꢀŒ‹ƒꢀƒŒ’‡ƒ‘ꢀJENNIFER,  
KEVIN and LINDA in your directory, pressing the  
dial pad key 5 ƪꢔꢕꢄƫ once will show JENNIFER,  
twice KEVIN, three times LINDA.  
To search alpha-  
betically  
NOTE: When searching alphabetically and you press a  
dial pad button, if there are no entries beginning with the let-  
ters on that button, the handset will show NO DATA.  
25  
ꢃ‡ƒ’—  
To change or dial entries  
When any entry is displayed, press MENU/SEL  
to see options. Press CID or DIR  
to highlight  
’†ƒꢀ Ž’‡Œꢀ —“ꢀ •Œ’ꢀ ƪ€Š‡Œ‰‡Œꢂꢀ ’ƒ–’ƫƐꢀ ’†ƒŒꢀ Žƒ‘‘ꢀ  
MENU/SEL again to select it.  
DIR  
1.  
2.  
To edit an entry  
$)2%#4/29  
When EDIT is blinking, press MENU/SEL. You can  
change the name and number (or distinctive ring  
setting on the cordless handset) by following the  
steps described on pages 23-24.  
DIR  
To delete an entry  
!$2-  
ꢌꢌꢌꢁꢅꢊꢇ  
Press  
CID or DIR  
until ERASE is blinking,  
then press MENU/SEL to display a confirma-  
tion screen of ERASE NO YES.  
MENU/SEL  
3.  
You can press CID or DIR  
to alternate between  
NO and YES to determine:  
30%%$ꢀ%$)4ꢀ%2!3%  
ꢌꢌꢌꢁꢅꢊꢇ  
ƨꢀꢓ†ƒŒꢀ ’†ƒꢀ YES blinking, press MENU/SEL to  
delete the entry.  
ƨꢀ†ƒŒ†ƒNO blinking, press MENU/SEL to can-  
cel the procedure.  
DIR  
30%%$ꢀ%$)4ꢀ%2!3%  
ꢌꢌꢌꢁꢅꢊꢇ  
NOTE: Each cordless handset has its own directory.  
Making changes to the directory of one handset will not affect  
the directories of the other handsets.  
DIR  
To make an entry into a speed dial entry  
30%%$ꢀ%$)4ꢀ%2!3%  
ꢌꢌꢌꢁꢅꢊꢇ  
Press CID or DIR  
MENU/SEL, then dial a memory location (1-9) to  
until SPEED is blinking, press  
transfer this entry to your speed dial directory.  
Press MENU/SEL to  
choose blinking option  
NOTE: If you use a memory location that is already assigned  
to a different entry in the directory, that entry will remain in the  
directory, but will no longer be a speed dial number.  
To dial a displayed number  
When any directory entry is displayed, press  
PHONE/FLASH or  
SPEAKER to dial the dis-  
played number.  
26  
Caller ID summary  
Information about caller ID with call waiting  
ꢊ†‡‘ꢀ Ž‚“’ꢀ †‘ꢀ ꢀ ŠŠƒꢀ ꢆꢃꢀ „“Œ’‡Œꢀ •‡’†ꢀ ŠŠꢀ  
waiting feature which works with service from  
your local telephone company.  
#(2)34).%ꢀ3-)4(  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢈŠŠƒꢀꢆꢃꢀ•‡’†ꢀŠŠꢀ•‡’‡ŒꢂꢀŠƒ’‘ꢀ—“ꢀ‘ƒƒꢀ’†ƒꢀŒ‹ƒꢀŒ‚ꢀ  
telephone number of the caller before answering  
the telephone, even while on another call.  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
It may be necessary to change your telephone  
service to use this feature. Contact your telephone  
company if:  
ƨꢀ ꢋ“”ƒ’†ŠŠƒŒ‚ŠŠ‡’‡ŒꢂƐ“’ꢀ  
as separate services (you may need combined  
service).  
ƨꢀ ꢋ“ꢀ †”ƒꢀ ŒŠ—ꢀ ŠŠƒꢀ ꢆꢃꢀ ‘ƒ”‡ƒƐꢀ ꢀ ŒŠ—ꢀ ŠŠꢀ  
waiting service.  
ƨꢀ ꢋ“Œ’”ƒŒ—ŠŠƒŠŠ‡’‡Œꢂꢀ  
services.  
ꢊ†‡‘ꢀ Ž‚“’ꢀ Œꢀ €ƒꢀ “‘ƒ‚ꢀ •‡’†ꢀ ƒꢂ“Šꢀ ŠŠƒꢀ ꢆꢃꢀ  
service, or this product’s other features can be used  
•‡’†“’ꢀ‘“€‘‡€‡Œꢂꢀ’ꢀƒ‡’†ƒꢀŠŠƒꢀꢆꢃꢀꢀ‹€‡Œƒ‚ꢀ  
ŠŠƒꢀꢆꢃꢀ•‡’†ꢀŠŠꢀ•‡’‡Œꢂꢀ‘ƒ”‡ƒƓ  
ꢊ†ƒƒƒƒƒ‘ŠŠƒƒ”‡ƒ‘ƓŒ‚‚‡’‡ŒƐꢀ  
services may not be available in all areas.  
ꢃƒŽƒŒ‚‡Œꢂꢀ Œꢀ —“ꢀ ‘ƒ”‡ƒƐꢀ —“ꢀ ‹—ꢀ ‘ƒƒꢀ ’†ƒꢀ  
caller’s number or the caller’s name and number.  
This product can provide information only if both  
you and the caller are in areas offering caller  
ꢆꢃƒ”‡ƒŒ‚’†ƒŠƒŽ†Œƒ‹ŽŒ‡ƒ‘‘ƒꢀ  
compatible equipment. The time and date are  
sent by the telephone company along with the  
call information.  
27  
ꢈŠŠƒꢀꢆꢃꢀŽƒ’‡Œ  
Caller ID summary  
How caller ID works  
ꢆ„ꢀ —“ꢀ ‘“€‘‡€ƒꢀ ’ꢀ ŠŠƒꢀ ꢆꢃꢀ ‘ƒ”‡ƒꢀ Ž”‡‚ƒ‚ꢀ €—ꢀ  
your local telephone company, information about  
each caller will be displayed between the first and  
second ring.  
Appears when a caller  
#(2)34).%ꢀ3-)4(ꢀ  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
has made two or more  
consecutive calls.  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
Caller’s name  
Caller’s phone  
number  
#(2)34).%ꢀ3-)4(ꢀ  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢂꢅ  
ꢂꢅꢆꢁꢇ  
Call number of  
call summary  
Appears when  
the call is missed  
and un-reviewed.  
AM  
ꢁꢂꢃꢂꢄ  
Time of call ꢃ’ƒꢀ„ꢀŠŠ  
Information about the last 30 incoming calls is  
stored in the call summary. You can review the call  
z to find out who has called, return the call, or copy  
the caller’s name and number into directory.  
If the caller has made two or more consecutive  
NOTES:  
calls, the repeat tag ( ) will be displayed in the top  
*
1. ꢈŠŠƒꢀ ꢆꢃꢀ „ƒ’“ƒ‘ꢀ •‡ŠŠꢀ •‰ꢀ  
only if both you and the  
caller are in areas offering  
ŠŠƒꢀꢆꢃꢀ‘ƒ”‡ƒƐꢀŒ‚ꢀ‡„ꢀ€’†ꢀ  
telephone companies use  
compatible equipment.  
right corner of the screen.  
When the call summary is full, the oldest entry is  
deleted to make room for new incoming call infor-  
mation.  
2. The number shown by your  
ŠŠƒꢀ ꢆꢃꢀ •‡ŠŠꢀ €ƒꢀ ‡Œꢀ ’†ƒꢀ „-  
mat sent by the telephone  
company. The telephone  
company usually delivers  
10-digit telephone numbers  
(area code plus telephone  
number). If the telephone  
number of the person call-  
‡Œꢂꢀ‚ƒ‘ꢀŒ’ꢀƒ–’Š—ꢀ‹’†ꢀꢀ  
number in your directory, the  
name will appear as deliv-  
ered by the telephone com-  
ŽŒ—Ɠꢀꢑꢀƒ–‹ŽŠƒꢀ‡„ꢀ’†ƒꢀ’ƒŠƒ-  
phone company includes the  
area code and the directory  
number does not, the name  
will appear as delivered by  
the telephone company.  
If you answer a call before the information appears  
on the screen, it will not be saved in the call sum-  
mary.  
About names  
Names of callers will be displayed only if the infor-  
mation is provided by your local telephone com-  
pany.  
ꢆ„†ƒŒ‹‡ŒꢂƒŠƒŽ†ŒƒŒ“‹€ƒƒ–’Š—’†ƒꢀ ‘ꢀ  
a telephone number in your directory, the name  
that appears on the screen will match the corre-  
sponding name in your directory.  
ꢑꢀƒ–‹ŽŠƒƒꢀꢆ„ꢀꢈ†‡‘’‡Œƒꢀꢌ‹‡’†ꢀŠŠ‘Ɛꢀ†ƒꢀŒ‹ƒꢀ•‡ŠŠꢀ  
appear as CHRIS if this is how you entered it into  
your directory.  
28  
ꢈŠŠƒꢀꢆꢃꢀŽƒ’‡Œ  
Caller ID summary  
There are also occasions when other information  
or no information is displayed for various reasons:  
On-screen message Reason  
02)6!4%ꢀ.!-%  
Caller prefers to remain anony-  
mous.  
#(2)34).%ꢀ3-)4(  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
02)6!4%ꢀ#!,,%2  
Caller name and telephone  
number not revealed at caller's  
request.  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
5.+./7.ꢀ.!-%  
Your local telephone company is  
unable to determine the caller's  
name.  
5.+./7.ꢀ#!,,%2  
Your local telephone company is  
unable to determine the caller's  
name and telephone number. Calls  
from other countries may also  
generate this message.  
Missed calls  
When a handset is in idle mode and has calls that  
have not been reviewed, its screen will show XX  
MISSED CALLS.  
Any entries which have not been reviewed will be  
counted as MISSED CALLS when the telephone is  
idle. Each time a call summary entry marked NEW is  
reviewed, the number of missed calls decreases by  
one.  
ꢂꢅꢀ-)33%$ꢀ#!,,3  
ꢈꢀꢈꢀꢁꢀꢈꢀꢈ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
If there are too many missed calls and you don’t want  
to review them one by one, but still want to keep them  
in the call summary, press and hold OFF/CLEAR for  
two seconds when the handset is idle. All the entries  
‡Œ†ƒŠŠƒ“‹‹—‡ŠŠƒŒ‘‡‚ƒƒ‚Š‚ƪ†”ƒꢀ  
been reviewed), and the missed calls counter is reset  
to 0.  
29  
CID  
1.  
2.  
ꢈŠŠƒꢀꢆꢃꢀŽƒ’‡Œ  
0!4ꢀ*/(.3/.  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢂꢊ  
ꢂꢅꢆꢁꢇ  
To review the call summary  
AM  
ꢁꢂꢃꢂꢄ  
ꢊ†ƒꢀ ŠŠꢀ ‘“‹‹—ꢀ ƒ”‡ƒ•ꢀ ‚‡‘ŽŠ—‘ꢀ ’†ƒꢀ ŠŠƒꢀ ꢆꢃꢀ ‡Œꢀ  
reverse chronological order, with the latest one (the  
one with the highest number) first.  
CID  
#(2)3ꢀ7),,)!-3  
ꢉꢂꢄꢈꢌꢌꢌꢈꢁꢅꢊꢇ  
ꢂꢅ  
When the telephone is not in use, press CID to  
display information about the most recent caller.  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
PHONE/FLASH  
3.  
To review your call summary  
0(/.%ꢀ/.ꢀꢀꢀꢀꢂꢂꢃꢁꢂ  
ꢉꢂꢄꢌꢌꢌꢌꢍꢎꢄ  
Press CID to scroll backward (display older calls)  
or DIR  
to scroll forward (display newer calls). The  
highest call number is the most recent call received.  
To dial this number  
ꢇ†ꢀŠŠƒꢀꢆꢃꢀƒŒ’—ꢀ‡Œꢀ’†ƒꢀŠŠꢀ‘“‹‹—ꢀ•‡ŠŠꢀ€ƒꢀ‚ƒ‘-  
ignated NEW until you have reviewed the call. After  
a call has been reviewed, it will disappear.  
NOTE: Consecutive incoming  
calls originating from the same tel-  
ephone number are identified by an  
asterisk at the top right corner of  
the screen and will be counted as  
ŒƒꢀŠŠꢀ‡Œꢀ’†ƒꢀŠŠƒꢀꢆꢃꢀ‘“‹‹—Ɠ  
To return a call  
Press  
PHONE/FLASH or  
SPEAKER to call the  
CID  
number currently displayed.  
0!4ꢀ*/(.3/.  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
Dialing options  
ꢂꢊ  
AM  
ꢈŠŠƒꢀ ꢆꢃꢀ Œ“‹€ƒ‘ꢀ ‹—ꢀ ŽŽƒꢀ •‡’†ꢀ Œꢀ ƒꢀ ‚ƒꢀ  
that may not be required for local calls.  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
- OR-  
If the number displayed is not in the correct format,  
you can change how it is dialed. Press # repeatedly  
to see dialing options. With each button press, a  
new option will be displayed. Press PHONE/FLASH  
or SPEAKER to dial when the number appears in  
the proper format for your area.  
CID  
1.  
2.  
0!4ꢀ*/(.3/.  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢂꢊ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
#
0!4ꢀ*/(.3/.  
The various dialing options are:  
ꢁꢈꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢂꢊ  
ꢁꢈꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢌꢌꢌꢈꢂꢁꢂꢂ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
ꢁꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
3.  
4.  
#
0!4ꢀ*/(.3/.  
ꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢂꢊ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
#
0!4ꢀ*/(.3/.  
ꢁꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢂꢊ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
30  
ꢈŠŠƒꢀꢆꢃꢀŽƒ’‡Œ  
CID  
1.  
2.  
3.  
0!4ꢀ*/(.3/.  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
Delete call summary entries  
ꢂꢊ  
ꢂꢅꢆꢁꢇ  
AM  
To delete a single call summary entry  
ꢁꢂꢃꢂꢄ  
CID  
Press CID‡‘ŽŠ—†ƒ‡‘’ŠŠƒŠ‡‘’‡ŒꢂƓ‘ƒꢀ  
the CID or DIR  
keys to find the entry you want  
#(2)3ꢀ7),,)!-3  
ꢉꢂꢄꢈꢌꢌꢌꢈꢁꢅꢊꢇ  
to delete, then press CHAN/DELETE. When the entry  
‡‘ꢀ‚ƒŠƒ’ƒ‚Ɛꢀ’†ƒꢀŒƒ–’ꢀŠ‚ƒ‘’ꢀƒ‚ꢀ‡‘ꢀ‚‡‘ŽŠ—ƒ‚Ɠ  
ꢂꢅ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
CHAN/DELETE  
To delete all call summary entries  
-!2+ꢀ#,!94/.  
ꢉꢂꢄꢈꢌꢌꢌꢈꢌꢍꢎꢄ  
To clear your call summary completely, press and  
hold CHAN/DELETE while the phone is idle (not in  
use). This will display a confirmation screen ask-  
‡Œꢂꢀ‡„ꢀ—“ꢀ•Œ’ꢀ’ꢀƒ‘ƒꢀŠŠꢀƒŒ’‡ƒ‘ꢀ‡Œꢀ’†ƒꢀŠŠƒꢀꢆꢃꢀ  
summary. If you select yes, the call summary will  
be cleared and the screen will return to normal  
standby display, and the missed calls counter is  
reset to 0.  
ꢂꢁ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
- OR-  
ꢅꢎꢀ-)33%$ꢀ#!,,3  
ꢈꢈꢁꢈꢈ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
CHAN/DELETE  
1.  
2.  
3.  
NOTES:  
1. Each cordless handset has its own call summary. When you  
delete one or all call summary entries from one cordless  
handset, the information on all other cordless handsets will  
not be affected.  
%2!3%ꢀ!,,ꢀ./ꢀ9%3  
ǎƓꢀꢀꢓ†ƒŒꢀ’†ƒƒꢀƒꢀŠƒ‚—ꢀǏnjꢀƒŒ’‡ƒ‘ꢀ‡Œꢀ’†ƒꢀŠŠƒꢀꢆꢃꢀ‹ƒ‹—Ɛꢀ’†ƒꢀ  
Œƒ–’ꢀ‡Œ‹‡ŒꢂꢀŠŠꢀ•‡ŠŠꢀ“’‹’‡ŠŠ—ꢀ“‘ƒꢀ’†ƒꢀŠ‚ƒ‘’ꢀƒŒ’—ꢀ’ꢀ  
€ƒꢀ‚ƒŠƒ’ƒ‚ꢀ„‹ꢀ’†ƒꢀŠŠƒꢀꢆꢃꢀ‹ƒ‹—ꢀ„ꢀ’†ƒꢀ†Œ‚‘ƒ’Ɠ  
DIR  
%2!3%ꢀ!,,./ꢀ9%3  
MENU/SEL  
ꢈꢈꢁꢈꢈ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
Call summary cleared  
31  
ꢈŠŠƒꢀꢆꢃꢀŽƒ’‡Œ  
CID  
1.  
Add entries to the directory  
0!4ꢀ*/(.3/.  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢓ†ƒŒꢀ Œ—ꢀ ŠŠƒꢀ ꢆꢃꢀ ‘ƒƒŒꢀ ‡‘ꢀ ‚‡‘ŽŠ—ƒ‚Ɛꢀ „ŠŠ•ꢀ ’†ƒꢀ  
ꢂꢊ  
AM  
steps on left to enter it into your telephone directory.  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
Both the caller’s name and telephone number will  
be entered as they appear in the call summary. At  
steps 3-4, you can make any changes to the name  
or number by pressing CHAN/DELETE to erase char-  
acters, then use the dial pad to enter the correct  
information (see pages 23-24 for instructions).  
MENU/SEL then  
2.  
3.  
CID or DIR  
$)!,ꢀ02/'2!-  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢂꢊ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
MENU/SEL  
When the number is stored, the screen returns to  
the call summary display. The entry copied to your  
telephone directory remains in the call summary  
until deleted.  
0!4ꢀ*/(.3/.  
ꢉꢂꢄꢌꢌꢌꢂꢁꢂꢂ  
ꢂꢊ  
ꢂꢅꢆꢁꢇ  
AM  
ꢁꢂꢃꢂꢄ  
Edit name as desired  
MENU/SEL  
4.  
5.  
6.  
0!4ꢀ*/(.3/.  
ꢉꢂꢄꢌꢌꢌꢂꢁꢂꢂ?  
ꢂꢊ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
Edit number as desired  
MENU/SEL  
$)34).#4ꢀ2).'.  
ꢉꢂꢄꢌꢌꢌꢂꢁꢂꢂ  
ꢂꢊ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
MENU/SEL  
0!4ꢀ*/(.3/.  
ꢉꢂꢄꢈꢌꢌꢌꢈꢂꢁꢂꢂ  
ꢂꢊ  
ꢂꢅꢆꢁꢇ  
AM  
ꢁꢂꢃꢂꢄ  
Entry added to  
phone directory  
32  
Answering system operation  
Message capacity  
The answering system can record up to 95 mes-  
sages depending on the length of each message.  
Individual messages can be up to four minutes  
ŠŒꢂƐꢀ Œ‚ꢀ ’’Šꢀ ‹–‡‹“‹ꢀ ƒ‚‡Œꢂꢀ ’‡‹ƒꢀ ‡‘ꢀ ǍǑꢀ  
minutes. Messages will remain available for replay  
until you delete them.  
Message counter  
Number of messages (or dur-  
ing playback, message number  
currently playing)  
Voice prompts  
Each time you press any answering system key, the  
answering system uses voice prompts to guide you.  
Press repeatedly to  
hear setup options  
(page 36).  
Press to review or  
record announcement;  
press again to quit  
(page 35).  
Press to review or  
set clock (page 34).  
Press to record a memo  
(page 38) or after press-  
ing ANNC. to record an  
outgoing announce-  
ment (page 35).  
Press to delete mes-  
sage currently play-  
ing; press and hold  
to delete all old mes-  
sages (page 37).  
Press to turn answer-  
ing system on or off  
(page 40).  
Press to repeat mes-  
sage; press twice to  
play previous mes-  
sage (page 37).  
Press to adjust play-  
back volume (page  
37).  
Press to start or stop  
message playback  
(page 37).  
Press to skip a mes-  
sage (page 37).  
33  
Answering system operation  
Day & time announcements  
To set day and time  
Before playing each message, the answering sys-  
tem announces the day and time when the mes-  
sage was received.  
Before using the answering system, follow the  
steps on the left of this page to set the day, time  
and year, so that messages are dated correctly.  
If the clock is not set, before new messages are  
recorded, the system will announce "Time and day  
not set" before each message is played back.  
CLOCK.  
1.  
The system will announce  
the current clock setting,  
then announces “To set the  
clock, press CLOCK.”  
CLOCK.  
2.  
The system uses voice prompts to guide you. Each  
time you press SKIP or REPEAT, the day, hour,  
minute or year increases or decreases by one.  
When you hear the correct setting, press CLOCK  
’ꢀ‹”ƒꢀ’ꢀ’†ƒꢀŒƒ–’ꢀ‘ƒ’’‡ŒꢂƓ  
The system will announce  
the current day setting, then  
announces “To change the day,  
press SKIP or REPEAT,  
to change the hour, press  
CLOCK.”  
SKIPor  
REPEAT  
3.  
To check day and time  
until the system announces  
the correct day, then press  
CLOCK.  
You can press CLOCK at any time to hear the cur-  
rent day and time without changing it.  
SKIPor  
REPEAT  
4.  
NOTES:  
until the system announces  
the correct hour, then press  
CLOCK.  
1. You can press and hold SKIPor  
REPEAT to increase or  
decrease the minutes or years by ten.  
ǎƓꢀꢀꢈŠŠƒŽ”‡‚ƒ‘†ƒ‡‹ƒŒ‚’ƒƓƒ’†ƒƒ†’ꢀ  
’†ƒ—†ƒƒƒ‰ƒŠ“Š’ƒ‚‹†ƒŠŠƒꢃꢀ  
information. After you set the time once, it will thereafter  
€ƒꢀ ‘ƒ’ꢀ “’‹’‡ŠŠ—ꢀ •‡’†ꢀ ‡Œ‹‡Œꢂꢀ ŠŠƒꢀ ꢆꢃꢀ ‡Œ„‹’‡ŒƓꢀ  
The time will be set automatically only if you subscribe to  
ŠŠƒꢀꢆꢃꢀ‘ƒ”‡ƒꢀŽ”‡‚ƒ‚ꢀ€—ꢀ—“ꢀŠŠꢀ’ƒŠƒŽ†Œƒꢀ‹ŽŒ—ꢀ  
(page 27).  
SKIPor  
REPEAT  
5.  
until the system announc-  
es the correct minute, then  
press CLOCK.  
SKIPor  
REPEAT  
6.  
until the system announc-  
es the correct year, then  
press CLOCK. The system  
announces the current clock  
setting.  
34  
Answering system operation  
Outgoing announcements  
Elapsed  
recording  
time (in  
The outgoing announcement is the message callers  
hear when calls are answered by the answering system.  
seconds).  
The telephone is factory set with an announcement.  
If the telephone is set up to record messages, it  
answers calls with “Hello. Please leave a message  
after the tone.” You can use this announcement, or  
replace it with a recording of your own voice.  
Press to stop recording.  
ANNC.  
1.  
“Announcement.  
Press PLAY or press  
RECORD.”  
To play your outgoing announcement  
Press ANNC., you will hear "Announcement. Press  
PLAY or press RECORD." Then press  
You will hear the outgoing announcement. Press ANNC.  
PLAY/STOP.  
2.  
PLAY/STOP  
(Plays announce-  
ment previously  
recorded).  
’ꢀƒ–‡’ꢀ’†ƒꢀŒŒ“Œƒ‹ƒŒ’ꢀ‹ƒŒ“Ɠꢀ  
To record your outgoing announcement  
-OR-  
Press ANNC., then you will hear "Announcement.  
Press PLAY or press RECORD." Press RECORD  
and begin speaking after hearing "Record after  
the tone. Press STOP when you are done." Speak  
facing the telephone base from about nine inches  
ANNC.  
1.  
“Announcement.  
Press PLAY or press  
RECORD.”  
away. Press  
PLAY/STOP when you are done.  
RECORD  
2.  
3.  
Your recorded announcement will be played back.  
Press ANNC.ꢀ’ꢀƒ–‡’ꢀ’†ƒꢀŒŒ“Œƒ‹ƒŒ’ꢀ‹ƒŒ“Ɠ  
“Record after the  
tone. Press STOP  
when you are  
done.”  
Elapsed time (in seconds) will be shown in the mes-  
sage window when recording. You can record an  
announcement up to 90 seconds long. Announcements  
shorter than two seconds long will not be recorded.  
Speak into microphone.  
To delete your outgoing announcement  
Press ANNC., then you will hear Announcement. Press  
Microphone  
PLAY or press RECORD.Then press  
PLAY/STOP  
4.  
5.  
to begin playback. Press DELETE during playback to  
delete your announcement. Press ANNC.ꢀ ’ꢀ ƒ–‡’ꢀ ’†ƒꢀ  
announcement menu.  
PLAY/STOP  
(Announcement  
is played back).  
When your announcement is deleted, calls will be  
answered with the the factory set announcement  
described above.  
ANNC.  
’ꢀƒ–‡’ꢀŒŒ“Œƒ‹ƒŒ’ꢀƒ‚-  
ing.  
35  
Answering system operation  
Changing feature options  
You can change how the answering system oper-  
ates. Press SETUP repeatedly to hear each feature.  
When you hear the feature you want to modify  
press  
Press  
SKIP or REPEAT to change the setting.  
PLAY/STOP ’ꢀŒ„‡‹ꢀ’†ƒꢀ‘ƒ’’‡ŒꢂꢀŒ‚ꢀƒ–‡’ꢀ  
the menu.  
SETUP  
1.  
2.  
Feature options ƪꢃƒ„“Š’ꢀ‘ƒ’’‡Œꢂ‘ꢀ“Œ‚ƒŠ‡Œƒ‚ƫ  
until desired feature  
is heard (see list at  
right).  
System announces:  
Feature description:  
"Number of rings," cur- Choose number of rings before  
rent setting, then "To the system answers a call. When  
change the setting press toll saver is active, the system  
SKIP or REPEAT; to con- answers after two rings if you  
tinue setup, press SETUP." have new messages, and after  
SKIP or  
REPEAT  
until desired selection  
is heard.  
ꢉŽ’‡Œ‘ƒꢀǎƤ4/6/toll saver  
four rings if you have no new  
messages. When retrieving mes-  
sages from a long distance call,  
you may disconnect your call  
after three rings so that there  
will be no long distance charge  
incurred.  
SETUP  
3.  
to set selection and  
moveꢀ’ꢀŒƒ–’ꢀ‹ƒŒ“ꢀ  
option.  
“Base ringer,” current set-  
ting, then “To change the  
-OR-  
Choose the base ringer volume  
between high and low level, or  
setting, press SKIP or turn the base ringer off.  
REPEAT; to continue setup,  
press SETUP.”  
PLAY/STOP  
to set selection and  
exit menu.  
ꢉŽ’‡Œ‘ƒꢀ†‡ꢂ†Ƥlow/off  
"Remote access code,"  
current setting, then "To  
change the setting press  
SKIP or REPEAT; to con-  
tinue setup, press SETUP."  
ꢉŽ’‡Œ‘ƒꢀ ƪ‘ƒŠƒ’ꢀ ꢀ ’•ƕ  
digit code) 19  
Select a two-digit number (10-99)  
for remote access from another  
telephone (page 41).  
NOTES:  
1. The message alert tone will  
beep only if all the conditions  
below are met:  
NOTE: Press and hold SKIP  
Answering system is on  
Message alert tone setting  
is on  
or REPEAT to increase or decrease  
the remote access code number by  
ten.  
Have new messages  
ǎƓꢀ ꢍƒ‘‘ꢀ Œ—ꢀ €‘ƒꢀ ‰ƒ—ꢀ ƪƒ–ƒŽ’ꢀ  
HANDSET LOCATOR) to  
"Message alert tone,"  
current setting, then "To every 10 seconds when there are  
change the setting, press  
SKIP or REPEAT; to con-  
tinue setup, press SETUP."  
ꢉŽ’‡Œ‘ƒꢀŒƤoff  
When on, the telephone beeps  
temporarily silence the mes-  
sage alert tone. If you press  
new messages.  
and hold  
DELETE you will  
delete all old messages and  
the message alert tone will  
be temporarily silenced. The  
message alert tone will be  
ƒƕ’‡”’ƒ‚ꢀ •‡’†ꢀ ’†ƒꢀ Œƒ–’ꢀ  
incoming message.  
36  
Answering system operation  
Number of messages (or during  
playback, message number cur-  
rently playing).  
Message playback  
Press  
PLAY/STOP to listen to messages. The  
system announces the number of messages, then  
begins playback.  
If you have new messages waiting, you will hear  
only the new messages (oldest first). If there are  
no new messages, the system will playback all  
messages (oldest first).  
PLAY/STOP to begin  
or end message playback.  
Announcements  
PLAY/STOP  
1.  
ƨꢀ ꢓ†ƒŒꢀ ŽŠ—€‰ꢀ €ƒꢂ‡Œ‘Ɛꢀ —“ꢀ •‡ŠŠꢀ †ƒꢀ ’†ƒꢀ ’’Šꢀ  
number of messages.  
You have [xx] new  
messages and [xx]  
old messages”  
ƨꢀ Ɇƒ„ƒꢀƒ†ꢀ‹ƒ‘‘ꢂƒƐꢀ—“ꢀ•‡ŠŠꢀ†ƒꢀ’†ƒꢀ‚—ꢀŒ‚ꢀ  
time it was received.  
Message playback begins.  
See options at right.  
ƨꢀ ɇ„’ƒꢀ’†ƒꢀŠ‘’ꢀ‹ƒ‘‘ꢂƒƐꢀ—“ꢀ•‡ŠŠꢀ†ƒꢀ“End of mes-  
sages.” If the system has less than five minutes  
of recording time left, you will hear the time  
remaining.  
2.  
PLAY/STOP  
to end message playback.  
Options during playback  
NOTES:  
1. If F is flashing in the mes-  
sage window, memory  
is full. You will have to  
delete some messages  
before new ones can be  
received.  
ƨꢀ ꢍƒ‘‘ꢀ VOLUME button to adjust the speaker  
volume.  
ƨꢀ ꢍƒ‘‘ꢀ SKIPꢀ’ꢀ‘‰‡Žꢀ’ꢀŒƒ–’ꢀ‹ƒ‘‘ꢂƒƓ  
ƨꢀ ꢍƒ‘‘ꢀ REPEAT to repeat the message cur-  
rently playing. Press twice to hear previous  
message.  
ǎƓꢀꢀꢊ†ƒꢀ‹–‡‹“‹ꢀƒ‚ꢀ’‡‹ƒꢀ  
is 15 minutes.  
3. If you receive calls when  
the memory is full, the  
telephone will ring 10  
times, then answer and  
announce “Memory is  
full, enter remote access  
code.”  
ƨꢀ ꢍƒ‘‘ꢀ DELETE to delete the message being  
played back.  
ƨꢀ ꢍƒ‘‘ꢀ  
PLAY/STOP to stop playback.  
4. New (unheard) messages  
cannot be deleted.  
To delete all messages  
To delete all old messages, press and hold DELETE  
while the telephone is idle (not during a call, or  
during message playback).  
37  
Answering system operation  
Recording & playing memos  
Elapsed  
recording  
time (sec-  
onds).  
Memos are messages you record yourself. They  
ƒꢀ ‘”ƒ‚Ɛꢀ ŽŠ—ƒ‚ꢀ €‰ꢀ Œ‚ꢀ ‚ƒŠƒ’ƒ‚ꢀ ƒ–’Š—ꢀ Š‡‰ƒꢀ  
incoming messages. You can record a memo as  
a reminder to yourself, or leave a message for  
someone else if other members of your household  
are using the answering system.  
Press to stop recording.  
To record a memo  
Press RECORD. Elapsed time (in seconds) is shown  
in the message window as you record. You can  
record a memo up to four minutes long. Memos  
less than one second long will not be recorded.  
RECORD  
1.  
Record after the  
tone. Press STOP  
when you are done.”  
Press  
PLAY/STOP to stop recording.  
Speak into microphone.  
2.  
To play back a memo  
Press  
PLAY/STOP to hear messages and memos  
(see page 37 for other options).  
Microphone  
3.  
PLAY/STOP  
Recorded, beep,”  
the memo has  
been recorded.  
38  
Answering system operation  
Message counter displays  
The message counter usually displays the total  
number of memos and incoming messages. See  
’†ƒꢀŠ‡‘’ꢀ€ƒŠ•ꢀ„ꢀƒ–ŽŠŒ’‡Œ‘ꢀ„ꢀ’†ƒꢀ‚‡‘ŽŠ—‘ꢀ‡Œꢀ  
this counter.  
Message counter  
Message counter displays  
No messages.  
ꢂꢀ(flashing)ꢀ  
ꢁꢈꢉꢌꢀ  
The clock needs to be set (page 34).  
Total number of messages and memos,  
or message number currently playing.  
ꢁꢈꢉꢌꢀ(flashing)  
Total number of messages and memos.  
The number flashes when there are new  
(un-reviewed) messages.  
If the telephone loses power, after power is  
restored, the number in the message coun-  
ter will flash to indicate the clock needs to  
be set.  
ꢁꢂꢈꢉꢉ  
Current remote access code while setting  
(page 36).  
ꢁꢈꢉꢉꢀ(counting)  
Elapsed time while recording a memo  
(page 38) or announcement up to 90  
seconds (page 35).  
ꢉꢉꢀƪ„Š‘†‡Œꢂƫꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢐƒ‹ꢀƒ‚‡Œꢂꢀ’‡‹ƒꢀ†‘ꢀƒ–ƒƒ‚ƒ‚ꢀ’†ƒꢀ  
‹–‡‹“‹ꢀ“Œ’ƒꢀŽ‡’—ꢀ„ꢀǕǕꢀ‘ƒŒ‚‘Ɠ  
&ꢀ(flashing)  
Memory is full. Messages must be deleted  
before new messages can be received.  
ꢈꢈ  
System is answering a call, being accessed  
remotely, or the clock is being set.  
ꢈꢈꢀ(flashing)  
System is being setup or initialized.  
/Nꢀ(or) /&ꢀ  
ꢃ‡‘ŽŠ—ƒ‚ꢀ„ꢀŒƒꢀ‘ƒŒ‚ꢀ•†ƒŒꢀŒ—ꢀŒ‘•ƒ-  
ing system setting is turned on or off.  
ꢂꢅ, ꢂꢇ, ꢂꢍ, T3  
Current number of rings while setting  
(page 36).  
ꢁꢈꢄꢀ  
ꢃ‡‘ŽŠ—ƒ‚ꢀ„ꢀ’•ꢀ‘ƒŒ‚‘ꢀ•†‡Šƒꢀ’ƒŠƒŽ†Œƒꢀ  
base speaker volume is being adjusted.  
(),ꢀ,/,ꢀ/&ꢀ  
ꢃ‡‘ŽŠ—ƒ‚ꢀ„ꢀ’•ꢀ‘ƒŒ‚‘ꢀ•†‡Šƒꢀ’ƒŠƒŽ†Œƒꢀ  
base ringer volume is being adjusted.  
39  
Answering system operation  
Answering system mode  
The answering system’s default factory setting is  
ON in order to answer and record messages. You  
can turn the answering system off, but if you do  
so, the answering system will not answer calls or  
record incoming messages.  
ANSWER ON  
1.  
until the system announces  
Calls will not be answered.”  
To turn the answering system off  
Press ANSWER ON until you hear “Calls will  
not be answered” and a confirmation beep. The  
ANSWER ON will be turned off.  
2.  
"Beep"  
The system has been  
turned off.  
NOTE: If the answering system is off and someone calls,  
the telephone will ring 10 times then answer and announce  
“Please enter your remote access code.” Enter your remote  
access code to enter remote access mode (page 41). If you do  
not enter the correct remote access code, the call will be  
ended automatically.  
-OR-  
ANSWER ON  
1.  
until the system announces  
Calls will be answered.”  
To turn the answering system on  
Press ANSWER ON until you hear “Calls will be  
answered” then a beep to confirm the ON setting.  
The ANSWER ON light will be turned on.  
2.  
"Beep"  
The system has been turned  
on.  
Call screening  
If the answering system is on and the base vol-  
ume is not off, you will hear the announcement  
and the incoming message when a call comes in.  
Call intercept  
While you are call screening, you can intercept  
the call by pressing PHONE/FLASH or SPEAKER  
on the handset.  
40  
Answering system operation  
Remote access  
A two digit security code is required to access your  
answering system from any touch-tone telephone.  
This code is 19 by default, see Changing feature  
options (page 36) to change it.  
ꢃ‡Šꢀ—“ꢀ’ƒŠƒŽ†ŒƒꢀŒ“‹€ƒꢀ  
from any touch-tone tele-  
phone.  
1.  
2.  
When the system answers,  
enter two digit remote  
access code (19 unless  
you have changed it).  
Press to hear all messages.  
Press to hear new messages.  
Play all messages  
1
Play new messages  
Enter remote commands  
(see list at right).  
3.  
4.  
2
Delete the message  
Press once during playback to  
delete current message. Press  
twice to delete all old messages.  
3
33  
Hang up to end the call  
and save all undeleted  
messages.  
Press during the caller’s message  
to repeat the message. Press dur-  
ing the beginning of the day and  
time announcement to go back to  
the previous message.  
Repeat or go back  
4
Press to stop any operation (stop  
playback, stop recording).  
Stop  
5
Skip to next message  
Press to skip the current message  
Œ‚ꢀ‚”Œƒꢀ’ꢀŒƒ–’ꢀ‹ƒ‘‘ꢂƒƓ  
6
Press * 7, wait for the beep, then  
begin speaking. Press 5 to stop  
recording and hear the playback  
of new announcement.  
Record announcement  
*7 to begin recording  
5 to stop recording  
Press to hear list of features &  
commands.  
Help menu  
*5  
Press to turn off answering sys-  
tem. Incoming calls will no long-  
er be answered.  
Turn system off  
NOTE: If you pause for  
0
more than four seconds dur-  
ing remote access, you will  
hear a help menu listing all  
features and commands. If  
there is no command  
entered for another 20 sec-  
onds, the call will end auto-  
matically.  
If off, system will answer after  
10 rings. Enter your access code,  
then press 0 to turn the answer-  
ing system on.  
Turn system on  
0
Press 8 or hang up to end the  
Exit  
remote access call.  
8
41  
ɇŽŽƒŒ‚‡–  
Screen icons, indicator lights & tones  
Screen icons & alert tones  
Screen icons  
The handset speakerphone is in use.  
ꢂꢍꢀ-)33%$ꢀ#!,,3  
ꢈꢈꢀꢁꢀꢈꢈ  
Microphone is muted.  
ꢅ‡Œꢂƒꢀ„„Ɠ  
ꢂꢅ  
AM  
ꢁꢂꢃꢂꢄ  
ꢂꢅꢆꢁꢇ  
Battery charging (animated display).  
ꢄ•ꢀ€’’ƒ—ꢀƪ„Š‘†‡ŒꢂƫƑꢀŽŠƒꢀ†Œ‚‘ƒ’ꢀ‡Œꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀꢀ  
charger to recharge.  
Missed and un-reviewed calls.  
Handset alert tones  
ꢊ†ƒꢀ”Š“‹ƒꢀŠƒ”ƒŠꢀ‡‘ꢀ’ꢀ’†ƒꢀ‹–‡‹“‹ꢀꢀ‹‡Œ‡‹“‹ꢀ‘ƒ’’‡ŒꢂƓ  
ꢄ•ꢀ€’’ƒ—ꢀ•Œ‡ŒꢂƓ  
Two short beeps  
Double beep every  
five seconds  
Five beeps  
ꢉ“’ꢀ„ꢀŒꢂƒꢀꢀ’†ƒꢀ†Œ‚‘ƒ’ꢀŒꢀ•†ƒŒꢀŒꢀ’†ƒꢀŠ‡ŒƒƓ  
Confirmation tone  
Command completed successfully.  
Telephone base tones  
One beep every  
Message alert.  
10 seconds  
Press VOLUME keys while the volume level is already at the highest or lowset.  
A series of beeps  
Indicator lights  
ANSWER ON  
ꢉŒꢀ•†ƒŒꢀ’†ƒꢀ  
answering system  
is on and ready to  
receive messages.  
CHARGE  
ꢉŒꢀ•†ƒŒꢀ†Œ‚‘ƒ’ꢀ  
is in the charger  
and charging.  
CHARGE/IN USE  
ƨꢀꢀꢀꢉŒ†ƒŒ†ƒ‚Šƒ‘‘Œ‚‘ƒ’ŽŽƒŠ—Ž‘‡’‡Œƒ‚ꢀ  
to charge in the telephone base.  
ƨꢀꢀŠ‘†ƒ‘ꢀ•†ƒŒꢀŒƒꢀ„ꢀ’†ƒꢀ†Œ‚‘ƒ’‘ꢀ‡‘ꢀ‡Œꢀ“‘ƒƐꢀ’†ƒꢀŒ‘•ƒ-  
SPEAKER  
ꢉŒꢀ•†ƒŒꢀ’†ƒꢀ‘Žƒ‰-  
erphone is in use.  
ing system is answering an incoming call.  
ƨꢀꢀꢀꢑŠ‘†ƒ‘ꢀ“‡‰Š—ꢀ•†‡ŠƒꢀŒꢀ‡Œ‹‡ŒꢂꢀŠŠꢀ‡‘ꢀ‡Œꢂ‡ŒꢂƓ  
42  
ɇŽŽƒŒ‚‡–  
Handset display screen messages  
Screen display messages  
The cordless handset is waiting  
for a dial tone.  
#/..%#4).'ꢐꢐꢐ  
There is a call coming in.  
ꢋꢋꢀ2).').'ꢀꢋꢋ  
ꢋꢋꢀ0!').'ꢀꢋꢋ  
#/..%#4).' ꢀꢐꢐ  
The cordless handset locator  
has been activated (all cord-  
less handsets beep to help you  
locate them).  
Cordless handset battery is  
depleted. Place cordless handset  
in base or charger to charge the  
battery.  
.%%$3ꢀ2%#(!2').'  
"!44%29ꢀ,/7  
Cordless handset battery is low.  
Place cordless handset in base  
or charger to charge the battery.  
The cordless handset is in use.  
0(/.%ꢀ/.  
Cordless handset is scanning  
for a clear channel to improve  
sound quality.  
3#!..).'ꢐꢐꢐ  
Another cordless handset is on  
a call.  
ꢉꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀŒŒ’ꢀ‹-  
municate with base. Check base  
power, or move closer.  
/4(%2ꢀ(!.$3%4ꢀ/.ꢀ  
and thenꢀ  
/2ꢀ/54ꢀ/&ꢀ2!.'%  
There are missed and un-reviewed  
calls in your call summary.  
88ꢀ-)33%$ꢀ#!,,3  
43  
ɇŽŽƒŒ‚‡–  
Handset display screen messages  
Screen display messages  
ꢋ“ꢀ ƒꢀ ’Œ‘„ƒ‡Œꢂꢀ Œꢀ ƒ–’ƒŒŠꢀ  
call on your cordless handset to  
another cordless (destination)  
handset.  
#!,,ꢀ42!.3&%22%$  
42!.3&%22%$ꢀ#!,,  
The destination cordless handset  
‡‘ꢀ ƒƒ‡”‡Œꢂꢀ ꢀ ’Œ‘„ƒƒ‚ꢀ ŠŠƓꢀ ꢉꢀ  
when the transferred call is not  
answered within 30 seconds on  
the destination handset, the origi-  
nating handset displays this mes-  
sage and starts ringing.  
Enter the cordless handset num-  
ber to which you want to transfer  
the call.  
%.4%2ꢀꢁꢈꢊ  
ƪꢉŒŠ—ꢀ„ꢀꢇǑǔǍǏɆƤꢇǍǔǍǏɆƫ  
Enter the cordless handset num-  
ber to which you want to transfer  
the call.  
%.4%2ꢀꢁꢈꢇ  
ƪꢉŒŠ—ꢀ„ꢀꢇǑǔǍǐɆƤꢇǍǔǍǐɆƫ  
The cordless handset ringer is  
turned off.  
2).'%2ꢀ/&&  
You are saving to a full directory.  
The handset speakerphone is in use.  
-%-/29ꢀ&5,,  
30%!+%2  
The call switches from normal call  
to mute.  
-)#2/0(/.%ꢀ-54%$  
-)#2/0(/.%ꢀ/.  
The call switches from mute to  
normal call.  
44  
ɇŽŽƒŒ‚‡–  
Troubleshooting  
If you have difficulty with your telephone, please try the sug-  
gestions below. For Customer Service, visit our website at  
dial 1 (866) 288-4268.  
My telephone  
does not work  
at all  
ƨꢀ ꢐ‰ƒꢀ ‘“ƒꢀ ’†ƒꢀ €’’ƒ—ꢀ ‡‘ꢀ ‡Œ‘’ŠŠƒ‚ꢀ Œ‚ꢀ †ꢂƒ‚ꢀ ƒ’Š—ꢀ  
(page 7). For optimum daily performance, return the cord-  
less handset to the telephone base after use.  
ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ’†ƒꢀŽ•ƒꢀ‚Ž’ƒꢀ‡‘ꢀ‘ƒ“ƒŠ—ꢀŽŠ“ꢂꢂƒ‚ꢀ‡Œ’ꢀŒꢀ  
outlet not controlled by a wall switch.  
ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ’†ƒꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀ‚ꢀ‡‘ꢀŽŠ“ꢂꢂƒ‚ꢀ„‡‹Š—ꢀ‡Œ’ꢀ  
the telephone base and the modular wall jack.  
ƨꢀ ꢁŒŽŠ“ꢂꢀ’†ƒꢀ’ƒŠƒŽ†Œƒƛ‘ꢀƒŠƒ’‡ŠꢀŽ•ƒƓꢀꢓ‡’ꢀ„ꢀŽŽ–-  
imately 15 seconds, then plug it back in. Allow up to one  
minute for the cordless handset and base to synchronize.  
ƨꢀ ꢈ†ꢂƒ†ƒ’’ƒ—Œ†ƒ‚Šƒ‘‘Œ‚‘ƒ’Šƒ‘’ꢀ  
16 hours.  
ƨꢀ ꢅƒ‹”ƒꢀŒ‚ꢀƒƕ‡Œ‘ƒ’ꢀ’†ƒꢀ€’’ƒ—Ɠꢀꢆ„ꢀ’†’ꢀ‘’‡ŠŠꢀ‚ƒ‘ꢀŒ’ꢀ•‰Ɛꢀ  
it may be necessary to purchase a new battery.  
ƨꢀ ꢃ‡‘ŒŒƒ’ꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ €‘ƒꢀ „‹ꢀ ’†ƒꢀ ‹‚“Šꢀ ˆ‰ꢀ  
and plug in a working telephone. If this telephone does  
not work, the problem is probably in the wiring or the  
local service. Call the local telephone company.  
BATTERY LOW  
is displayed on  
screen  
ƨꢀ ꢍŠƒꢀ’†ƒꢀ†Œ‚‘ƒ’ꢀ‡Œꢀ’†ƒꢀ€‘ƒꢀꢀ†ꢂƒꢀ„ꢀƒ†ꢂ‡ŒꢂƓ  
ƨꢀ ꢅƒ‹”ƒꢀ Œ‚ꢀ ƒƕ‡Œ‘’ŠŠꢀ ’†ƒꢀ €’’ƒ—ꢀ Œ‚ꢀ “‘ƒꢀ ‡’ꢀ Œ‹ŠŠ—ꢀ  
until fully discharged, then recharge the handset on the  
telephone base or charger for 16 hours.  
ƨꢀ ꢆ„†ƒ€”ƒƒ‘“ƒ‘Œ’ƒ’†ƒŽ€Šƒ‹Ɛ†ƒꢀ  
battery may need to be replaced.  
The battery does ƨꢀ ꢐ‰ƒ“ƒ†ƒŒ‚‘ƒ’ŽŠƒ‚Œ†ƒƒŠƒŽ†Œƒ‘ƒꢀ  
charger correctly. The CHARGE light on the telephone base  
or charger should be on.  
not charge in the  
handset or the  
handset battery  
does not accept  
charge  
ƨꢀ ꢆ„ꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ‡‘ꢀ‡Œꢀ’†ƒꢀ†ꢂƒꢀꢀ‡Œꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ  
base but the CHARGE light is not on, refer to The CHARGE  
light is off in this section.  
ƨꢀ ꢆ’ꢀ‹—ꢀ€ƒꢀŒƒƒ‘‘—ꢀ’ꢀŽ“†‘ƒꢀꢀŒƒ•ꢀ€’’ƒ—ƓꢀꢍŠƒ‘ƒꢀƒ„ƒꢀ  
to the batteries section of this user’s manual.  
ƨꢀ ꢊ†ƒƒŠƒŽ†Œƒ‡ꢂ†’ƒŠ„“Œ’‡Œ‡ŒꢂƓŠƒ‘ƒƒ„ƒꢀ  
the Limited warranty section of this user’s manual for  
further instruction.  
45  
ɇŽŽƒŒ‚‡–  
Troubleshooting  
The CHARGE  
ƨꢀ ꢈŠƒŒꢀ’†ƒꢀ‹ƒ’ŠŠ‡ꢀ†ꢂ‡ŒꢂꢀŒ’’‘ꢀŒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚-  
sets and telephone base each month using a pencil eraser  
light is off  
or a dry non-abrasive fabric.  
ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ’†ƒꢀŽ•ƒꢀ‚Ž’ƒꢀŒ‚ꢀ’ƒŠƒŽ†ŒƒꢀŠ‡Œƒꢀ‚‘ꢀƒꢀ  
plugged in correctly and securely.  
ƨꢀ ꢁŒŽŠ“ꢂꢀ ’†ƒꢀ Ž•ƒꢀ ‚Ž’ƒƓꢀ ꢓ‡’ꢀ „ꢀ ǍǑꢀ ‘ƒŒ‚‘ꢀ €ƒ„ƒꢀ  
plugging it back in. Allow up to one minute for the cordless  
handset and telephone base to reset.  
ƨꢀ ꢊ†ƒƒŠƒŽ†Œƒ‡ꢂ†’ƒŠ„“Œ’‡Œ‡ŒꢂƓŠƒ‘ƒƒ„ƒꢀ  
the Limited warranty section of this user’s manual for  
further instruction.  
There is no dial ƨꢀ ꢑ‡‘’Ɛꢀ’—ꢀŠŠꢀ’†ƒꢀ€”ƒꢀ‘“ꢂꢂƒ‘’‡Œ‘Ɠ  
tone  
ƨꢀ ꢐ”ƒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀŠ‘ƒꢀ’ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒƓꢀ  
It might be out of range.  
ƨꢀ ꢊ†ƒꢀ ’ƒŠƒŽ†Œƒꢀ Š‡Œƒꢀ ‚ꢀ ‹‡ꢂ†’ꢀ €ƒꢀ ‹Š„“Œ’‡Œ‡ŒꢂƓꢀ ꢊ—ꢀ  
installing a new telephone line cord.  
ƨꢀ ꢃ‡‘ŒŒƒ’ꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ €‘ƒꢀ „‹ꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ ˆ‰ꢀ  
and connect a different telephone. If there is no dial tone  
on the telephone either, the problem is in your wiring or  
local service. Contact your local telephone company.  
The telephone  
does not ring  
when there is  
an incoming  
call  
ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ’†ƒꢀ‡Œꢂƒꢀ‡‘ꢀŒꢀƪŽꢂƒ‘ꢀǍǎƕǍǏƫƓ  
ƨꢀ ꢐ‰ƒꢀ ‘“ƒꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒꢀ Š‡Œƒꢀ ‚ꢀ Œ‚ꢀ Ž•ƒꢀ ‚Ž’ƒꢀ  
are plugged in properly (page 6).  
ƨꢀ ꢊ†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ‹—ꢀ€ƒꢀ’ꢀ„ꢀ„‹ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ  
base. Move it closer to the telephone base.  
ƨꢀ ꢊ†ƒƒꢀ‹—ꢀ€ƒꢀ’ꢀ‹Œ—ꢀƒ–’ƒŒ‘‡Œꢀ’ƒŠƒŽ†Œƒ‘ꢀŒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ  
line to allow all of them to ring simultaneously. Try unplugging  
some of them.  
ƨꢀ ꢆ„ꢀ’†ƒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒ‘ꢀ‡Œꢀ—“ꢀ†‹ƒꢀƒꢀ†”‡Œꢂꢀ’†ƒꢀ‘‹ƒꢀ  
problem, the problem is in the wiring or local service.  
Contact the local telephone company (charges may apply).  
ƨꢀ ꢉ’†ƒꢀƒŠƒ’Œ‡ꢀŽ‚“’‘ꢀŒꢀ“‘ƒꢀ‡Œ’ƒ„ƒƒŒƒꢀ’ꢀ—“ꢀ  
cordless telephone. Try installing your telephone as far  
away as possible from the following electronic devices:  
wireless routers, radios, radio towers, pager towers, cel-  
lular telephones, digital telephones, intercoms, room  
‹Œ‡’‘ƐƒŠƒ”‡‘‡Œ‘Ɛꢈꢅ‘ƐŽƒ‘ŒŠ‹Ž“’ƒ‘Ɛ‡’†ƒŒꢀ  
appliances, and other cordless telephones.  
46  
ɇŽŽƒŒ‚‡–  
Troubleshooting  
ƨꢀ ꢊƒ‘’ꢀꢀ•‰‡Œꢂꢀ’ƒŠƒŽ†Œƒꢀ’ꢀ’†ƒꢀ‘‹ƒꢀ’ƒŠƒŽ†Œƒꢀˆ‰Ɠꢀꢆ„ꢀ  
another telephone has the same problem, the problem is  
in the telephone jack. Contact your local telephone com-  
pany (charges may apply).  
ƨꢀ ꢊ†ƒꢀ ’ƒŠƒŽ†Œƒꢀ Š‡Œƒꢀ ‚ꢀ ‹‡ꢂ†’ꢀ €ƒꢀ ‹Š„“Œ’‡Œ‡ŒꢂƓꢀ ꢊ—ꢀ  
installing a new telephone line cord.  
ƨꢀ ꢅƒƕ‡Œ‘’ŠŠ†ƒ’’ƒ—Œ‚ŽŠƒ†ƒ‚Šƒ‘‘Œ‚‘ƒ’Œꢀ  
the telephone base.  
ƨꢀ ꢓ‡’ꢀ „ꢀ ’†ƒꢀ ‚Šƒ‘‘ꢀ †Œ‚‘ƒ’ꢀ ’ꢀ ‘—Œ†Œ‡˜ƒꢀ •‡’†ꢀ ’†ƒꢀ  
telephone base. Allow up to one minute for this to take  
place.  
My phone rings  
but when I try  
to answer the  
call the handset  
screen shows  
CONNECTING…  
ƨꢀ ꢊ†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’ꢀ‹—ꢀ€ƒꢀ’ꢀ„ꢀ„‹ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ  
base. Move closer to the telephone base and try to  
answer the call.  
I cannot dial out ƨꢀ ꢑ‡‘’Ɛꢀ’—ꢀŠŠꢀ’†ƒꢀ€”ƒꢀ‘“ꢂꢂƒ‘’‡Œ‘Ɠ  
ƨꢀ ꢐ‰ƒ“ƒ†ƒƒ‡ŠŒƒƒ„ƒ‡Š‡ŒꢂƓŒ-  
mal if the cordless handset takes a second or two to  
synchronize with the telephone before producing a dial  
’ŒƒƓꢀꢓ‡’ꢀŒꢀƒ–’ꢀ‘ƒŒ‚ꢀ€ƒ„ƒꢀ‚‡Š‡ŒꢂƓ  
ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ‡‘ꢀ‘ƒ’ꢀ’ꢀ’†ƒꢀƒ’ꢀ‚‡Šꢀ‹‚ƒꢀ  
ƪŽ“Š‘ƒꢀ‚‡Šꢀꢀ’Œƒꢀ‚‡Šƫꢀ„ꢀ’†ƒꢀ‘ƒ”‡ƒꢀ‡Œꢀ—“ꢀƒƓꢀꢅƒ„ƒꢀ  
to the Handset settings section of this user’s manual  
(page 11) to set the dial mode.  
ƨꢀ ꢆ„ꢀ ’†ƒꢀ ’†ƒꢀ ’ƒŠƒŽ†Œƒ‘ꢀ ‡Œꢀ —“ꢀ †‹ƒꢀ ƒꢀ †”‡Œꢂꢀ ’†ƒꢀ  
same problem, the problem is in the wiring or local  
service. Contact your local telephone company (charg-  
es may apply).  
ƨꢀ ꢇŠ‡‹‡Œ’ƒꢀ Œ—ꢀ €‰ꢂ“Œ‚ꢀ Œ‡‘ƒƓꢀ ꢎ‡‘ƒꢀ „‹ꢀ ꢀ ’ƒŠƒ”‡-  
sion, radio, or other appliances may cause the telephone  
to not dial out properly. If you cannot eliminate the  
background noise, first try muting the cordless hand-  
set before dialing, or dialing from another room in your  
home with less background noise.  
There is noise or ƨꢀ ꢊ†ƒꢀ†Œ‚‘ƒ’ꢀ‹—ꢀ€ƒꢀ“’ꢀ„ꢀŒꢂƒƓꢀꢐ”ƒꢀ‡’ꢀŠ‘ƒꢀ’ꢀ’†ƒꢀ  
interference dur-  
ing a telephone  
conversation  
telephone base.  
47  
ɇŽŽƒŒ‚‡–  
Troubleshooting  
My calls fade  
out or cut in  
and out when  
I am using the  
cordless hand-  
set  
ƨꢀ ɇŽŽŠ‡Œƒ‘ꢀ ꢀ ’†ƒꢀ ‚Šƒ‘‘ꢀ ’ƒŠƒŽ†Œƒ‘ꢀ ŽŠ“ꢂꢂƒ‚ꢀ ‡Œ’ꢀ ’†ƒꢀ  
same circuit as the telephone base can cause interference.  
Try moving the appliance or telephone base to another outlet.  
ƨꢀ ꢉ’†ƒꢀ ƒŠƒ’Œ‡ꢀ Ž‚“’‘ꢀ Œꢀ “‘ƒꢀ ‡Œ’ƒ„ƒƒŒƒꢀ ’ꢀ —“ꢀ  
cordless telephone. Try installing your telephone as far  
away as possible from the following electronic devices:  
wireless routers, radios, radio towers, pager towers, cellular  
telephones, digital telephones, intercoms, room monitors,  
’ƒŠƒ”‡‘‡Œ‘Ɛꢀ ꢒꢈꢅ‘ƐŽƒ‘ŒŠꢀ ‹Ž“’ƒ‘Ɛꢀ ‰‡’†ƒŒꢀ ŽŽŠ‡Œƒ‘Ɛꢀ  
and other cordless telephones.  
ƨꢀ ꢐ‡•”ƒꢀ ”ƒŒ‘ꢀ Žƒ’ƒꢀ Œꢀ ’†ƒꢀ ‘‹ƒꢀ „ƒ“ƒŒ—ꢀ ‘ꢀ —“ꢀ  
’ƒŠƒŽ†ŒƒƓꢀ ꢆ’ꢀ ‡‘ꢀ Œ‹Šꢀ ’ꢀ ƒ–Žƒ‡ƒŒƒꢀ ‘’’‡ꢀ Œꢀ —“ꢀ ’ƒŠƒ-  
Ž†Œƒꢀ•†‡Šƒꢀ’†ƒꢀ‹‡•”ƒꢀ”ƒŒꢀ‡‘ꢀŽƒ’‡ŒꢂƓꢀꢃꢀŒ’ꢀ‡Œ‘’ŠŠꢀ  
this telephone in the same outlet or near a microwave oven.  
ƨꢀ ꢆ„“ƒŠƒŽ†ŒƒŽŠ“ꢂꢂƒ‚Œ‡’†‚ƒ‹“ꢂƒꢀ  
protector, plug the telephone (or modem/surge protec-  
tor) into a different location. If this solves the problem, re-  
locate your telephone or modem farther apart from each  
other, or use a different surge protector.  
ƨꢀ ꢊ†ƒꢀ Š—“’ꢀ „ꢀ —“ꢀ †‹ƒꢀ ꢀ „„‡ƒꢀ ‹‡ꢂ†’ꢀ €ƒꢀ Š‡‹‡’‡Œꢂꢀ ’†ƒꢀ  
operating range. Try moving the base to another location,  
preferably a higher location for better reception.  
ƨꢀ ꢃ‡‘ŒŒƒ’ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ„‹ꢀ’†ƒꢀ‹‚“Šꢀˆ‰ꢀŒ‚ꢀ  
plug in a corded telephone. If calls are still not clear, the  
problem is probably in the wiring or local service. Contact  
your local service company (charges may apply).  
ƨꢀ ꢌƒŠƒ’†ŒŒƒŠ‘“†“ꢂ†Ǎnj““’ƒƪƒ„ƒꢀ  
the user’s manual of your router for more information).  
ƨꢀ ꢆ„ꢀ’†ƒꢀ’†ƒꢀ’ƒŠƒŽ†Œƒ‘ꢀ‡Œꢀ—“ꢀ†‹ƒꢀƒꢀ†”‡Œꢂꢀ’†ƒꢀ‘‹ƒꢀ  
problem, the problem is in the wiring or local service.  
Contact the local telephone company (charges may apply).  
ƨꢀ ꢃꢀ—“ꢀ†”ƒꢀꢃꢌꢄꢀ‘ƒ”‡ƒƘꢀꢆ„ꢀ—ƒ‘Ɛꢀ—“ꢀŒƒƒ‚ꢀ’ꢀ†”ƒꢀꢀꢃꢌꢄꢀ  
filter installed at every telephone jack that has a tele-  
Ž†ŒƒꢀŒŒƒ’ƒ‚ꢀ’ꢀ‡’ƓꢀꢈŒ’’ꢀ—“ꢀꢃꢌꢄꢀ‘ƒ”‡ƒꢀŽ”‡‚ƒꢀ  
for filter information.  
I hear other calls ƨꢀꢃ‡‘ŒŒƒ’ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒꢀ„‹ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀˆ‰Ɠꢀ  
when using the  
telephone  
Plug in a different telephone. If you still hear other calls,  
the problem is probably in the wiring or local service.  
Call your local telephone company.  
Time and day  
ƨꢀ ꢋ“ꢀŒƒƒ‚ꢀ’ꢀ‘ƒ’ꢀ’†ƒꢀŒ‘•ƒ‡Œꢂꢀ‘—‘’ƒ‹ꢀŠ‰ꢀƪŽꢂƒꢀǏǐƫƓ  
not set” prompts  
48  
ɇŽŽƒŒ‚‡–  
Troubleshooting  
ꢐ—ꢀŠŠƒꢀꢆꢃꢀ  
ƨꢀ ꢈŠŠƒ“€‘‡Ž’‡Œƒ”‡ƒƓ““‘’“€‘‡€ƒꢀ  
this service from your local telephone company for this  
features are not  
feature to work on your telephone.  
working properly  
ƨꢀ ꢊ†ƒꢀŠŠƒꢀ‹—ꢀŒ’ꢀ€ƒꢀŠŠ‡Œꢂꢀ„‹ꢀŒꢀƒꢀ•†‡†ꢀ‘“ŽŽ’‘ꢀ  
ŠŠƒꢀꢆꢃƓ  
ƨꢀ Ɇ’†“Œ‚†ƒŠŠƒƛ‘ƒŠƒŽ†Œƒ‹ŽŒ‡ƒ‘“‘’‘ƒꢀ  
ƒ“‡Ž‹ƒŒ’ꢀ•†‡†ꢀƒꢀ‹Ž’‡€Šƒꢀ•‡’†ꢀŠŠƒꢀꢆꢃꢀ‘ƒ”‡ƒƓ  
ƨꢀ ꢆ„““€‘‡€ƒꢌꢄƒ”‡ƒƐŒ‘’ŠŠꢌꢄ‡Š’ƒ†ƒꢀ  
telephone line between the telephone base and the tele-  
Ž†ŒƒꢀŠ‡Œƒꢀˆ‰ƓꢀꢈŒ’’ꢀ—“ꢀꢃꢌꢄꢀ‘ƒ”‡ƒꢀŽ”‡‚ƒꢀ„ꢀ„‡Š’ƒꢀ  
information.  
The system does ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ—“ꢀ‘“€‘‡€ƒꢀ’ꢀŠŠƒꢀꢆꢃꢀ•‡’†ꢀŠŠꢀ•‡’‡Œꢂꢀ„ƒ-  
tures services provided by the local telephone company.  
ƨꢀ ꢊ†ƒŠŠƒ—Œ’ƒŠŠ‡Œꢂ‹Œƒ†‡†“Ž-  
Ž’‘ꢀŠŠƒꢀꢆꢃƓ  
ƨꢀ Ɇ’†“Œ‚†ƒŠŠƒƛ‘ƒŠƒŽ†Œƒ‹ŽŒ‡ƒ‘“‘’‘ƒꢀ  
ƒ“‡Ž‹ƒŒ’ꢀ•†‡†ꢀƒꢀ‹Ž’‡€Šƒꢀ•‡’†ꢀŠŠƒꢀꢆꢃꢀ‘ƒ”‡ƒƓ  
ƨꢀ ꢆ„ꢀ—“ꢀ‘“€‘‡€ƒꢀ’ꢀꢃꢌꢄꢀ‘ƒ”‡ƒƐꢀ‡Œ‘’ŠŠꢀꢀꢃꢌꢄꢀ„‡Š’ƒꢀ’ꢀ’†ƒꢀ’ƒŠ-  
ephone line between the telephone base and the telephone  
Š‡Œƒˆ‰ƓŒ’’“ꢌꢄƒ”‡ƒŽ”‡‚ƒ‡Š’ƒŒ„-  
mation.  
not receive caller  
ꢆꢃꢀꢀ’†ƒꢀ‘—‘’ƒ‹ꢀ  
does not display  
ŠŠƒꢀꢆꢃꢀ‚“‡Œꢂꢀ  
call waiting  
Common cure  
for electronic  
equipment  
ƨꢀ ꢆ„†ƒƒŠƒŽ†ŒƒŒ’ƒ‘ŽŒ‚‡ŒꢂŒ‹ŠŠ—Ɛ—Ž“’’‡Œꢂꢀ  
the cordless handset in the telephone base or the  
charger. If it does not seem to respond, try the following  
(in the order listed):  
ǍƓꢀꢃ‡‘ŒŒƒ’ꢀ’†ƒꢀŽ•ƒꢀ’ꢀ’†ƒꢀ’ƒŠƒŽ†Œƒꢀ€‘ƒƓ  
ǎƓꢀꢃ‡‘ŒŒƒ’ꢀ’†ƒꢀ€’’ƒ—ꢀŒꢀ’†ƒꢀ‚Šƒ‘‘ꢀ†Œ‚‘ƒ’Ɠ  
3. Wait a few minutes before connecting power to the  
telephone base.  
ǐƓꢀꢅƒƕ‡Œ‘’ŠŠ†ƒ’’ƒ—Œ‚ŽŠƒ†ƒ‚Šƒ‘‘Œ‚‘ƒ’ꢀ  
into the telephone base or charger.  
5. Wait for the cordless handset to synchronize its con-  
nection with the telephone base. Allow up to one  
minute for this to take place.  
The announce-  
ment message is  
not clear  
ƨꢀ ꢓ†ƒŒꢀ ƒ‚‡Œꢂꢀ ’†ƒꢀ ŒŒ“Œƒ‹ƒŒ’Ɛꢀ ‹‰ƒꢀ ‘“ƒꢀ —“ꢀ  
speak in a normal tone of voice about nine inches from  
the telephone base.  
ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ’†ƒƒꢀ‡‘ꢀŒꢀ€‰ꢂ“Œ‚ꢀŒ‡‘ƒꢀƪ’ƒŠƒ”‡‘‡ŒƐꢀ‹“‘‡Ɛꢀ  
traffic, etc.) when recording.  
49  
ɇŽŽƒŒ‚‡–  
Troubleshooting  
The answering ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ’†ƒꢀŒ‘•ƒ‡Œꢂꢀ‘—‘’ƒ‹ꢀ‡‘ꢀŒƓꢀꢓ†ƒŒꢀ’†ƒꢀŒ‘•ƒ-  
ing system is on, the red light on the ANSWER ON key  
system does not  
should be lit.  
answer after the  
correct number ƨꢀ ꢆ„ŠŠ”ƒ’‡”’ƒ‚Ɛ†ƒŒ“‹€ƒ‡Œꢂ‘†Œꢂƒ‘ꢀ  
two when there are new messages waiting (page 36).  
ƨꢀ ꢆ„ꢀ’†ƒꢀ‹ƒ‹—ꢀ‡‘ꢀ„“ŠŠꢀꢀ‡„ꢀ’†ƒꢀŒ‘•ƒ‡Œꢂꢀ‘—‘’ƒ‹ꢀ‡‘ꢀ„„Ɛꢀ’†ƒꢀ  
system will answer after ten rings. If the memory is full,  
you need to delete some old messages in order to make  
room for new messages.  
of rings  
ƨꢀ ꢆŒ‹ƒ‘ƒ‘Ɛ†ƒŒ‘•ƒ‡Œꢂ—‘’ƒ‹—ƒ„„ƒ’ƒ‚—ꢀ  
the ringing system used by the local telephone company.  
The answering ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ’†ƒꢀŒ‘•ƒ‡Œꢂꢀ‘—‘’ƒ‹ꢀ‡‘ꢀŒƓ  
system does not  
record message  
ƨꢀ ꢆ„ꢀ’†ƒꢀ‹ƒ‹—ꢀ‡‘ꢀ„“ŠŠꢀ’†ƒꢀ‘—‘’ƒ‹ꢀ•‡ŠŠꢀŒ‘•ƒꢀ„’ƒꢀ’ƒŒꢀ‡Œꢂ‘ꢀ  
and announce “Memory full. Enter remote access code.”  
You need to delete some old messages in order to make  
room for new messages.  
The messages ƨꢀ ꢆ„ꢀ ꢀ ŠŠƒꢀ ƒ†ƒ‘ꢀ ’†ƒꢀ ‹–‡‹“‹ꢀ ƒ‚‡Œꢂꢀ ’‡‹ƒꢀ „ꢀ „“ꢀ  
minutes, for each message, the system will disconnect and  
part of the message may be lost.  
on the answer-  
ing system are  
incomplete  
ƨꢀ ꢆ„ꢀ’†ƒꢀŠŠƒꢀŽ“‘ƒ‘ꢀ„ꢀ‹ƒꢀ’†Œꢀ‘ƒ”ƒŒꢀ‘ƒŒ‚‘Ɛꢀ’†ƒꢀ‘—‘-  
tem stops recording and disconnects the call.  
ƨꢀ ꢆ„ꢀ’†ƒꢀ‹ƒ‹—ꢀŒꢀ’†ƒꢀ‘—‘’ƒ‹ꢀ€ƒ‹ƒ‘ꢀ„“ŠŠꢀ‚“‡Œꢂꢀꢀ‹ƒ‘-  
sage, the system stops recording and disconnects the call.  
ƨꢀ ꢆ„ꢀ ’†ƒꢀ ŠŠƒƛ‘ꢀ ”‡ƒꢀ ‡‘ꢀ ”ƒ—ꢀ ‘„’Ɛꢀ ’†ƒꢀ ‘—‘’ƒ‹ꢀ ‹—ꢀ ‘’Žꢀ  
recording and disconnect the call.  
The messages  
on the system  
are very difficult  
to hear  
ƨꢀ ꢍƒ‘‘ꢀ VOLUME on the telephone base to increase the  
speaker volume.  
The answering ƨꢀ ꢐ‰ƒꢀ‘“ƒꢀ—“ꢀƒ‹’ƒꢀƒ‘‘ꢀ‚ƒꢀ‡‘ꢀƒ’ꢀƪŽꢂƒꢀǐǍƫƓ  
system does  
not respond to  
remote com-  
mands  
ƨꢀ ꢐ‰ƒꢀ ‘“ƒꢀ —“ꢀ ƒꢀ ŠŠ‡Œꢂꢀ „‹ꢀ ꢀ ’“†ƕ’Œƒꢀ ’ƒŠƒŽ†ŒƒƓꢀ  
When dialing a number, you should hear tones. If you hear  
clicks, then it is not a touch-tone telephone and cannot  
activate the answering system.  
ƨꢀ ꢊ†ƒŒ‘•ƒ‡Œꢂ—‘’ƒ‹—Œ’ƒ’ƒ’†ƒƒ‹’ƒƒ‘‘ꢀ  
code when your announcement is playing. Wait until the  
announcement is over before entering the code.  
ƨꢀ ꢊ†ƒƒ—ƒŒ’ƒ„ƒƒŒƒŒ†ƒƒŠƒŽ†ŒƒŠ‡Œƒ“ƒꢀ  
using. Press the dial pad keys firmly when dialing.  
50  
ɇŽŽƒŒ‚‡–  
Important safety instructions  
This symbol is to alert you to important operating or servicing instructions that may  
appear in this user’s manual. Always follow basic safety precautions when using this product to  
reduce the risk of injury, fire, or electric shock.  
Safety information  
ƨꢀ Read and understand all instructions in the user’s manual. Observe all  
markings on the product.  
ƨꢀ Avoid using a telephone during a thunderstorm. There may be a slight  
chance of electric shock from lightning.  
ƨꢀ Do not use a telephone in the vicinity of a gas leak. If you suspect a gas  
leak, report it immediately, but use a telephone away from the area where  
gas is leaking. If this product is a cordless model, make sure the base is  
also away from the area.  
ƨꢀ Do not use this product near water, or when you are wet. ꢑƒ–‹ŽŠƒƐꢀ  
‚Œ’‘ƒŒƒ’‘ƒ‹ƒŒ’†•ƒƐŒƒ–’•‡‹‹‡ŒꢂŽŠƐꢀ  
€’†’“€Ɛ‡’†ƒŒ‡Œ‰ƐŠ“Œ‚—“€ƓŒ’‘ƒŠ‡“‡‚‘ƒ‘ŠŽ—‘ꢀ  
for cleaning. If the product comes in contact with any liquids, unplug any  
Š‡ŒƒꢀꢀŽ•ƒꢀ‚ꢀ‡‹‹ƒ‚‡’ƒŠ—ƓꢀꢃꢀŒ’ꢀŽŠ“ꢂꢀ’†ƒꢀŽ‚“’ꢀ€‰ꢀ‡Œꢀ“Œ’‡Šꢀ‡’ꢀ†‘ꢀ  
dried thoroughly.  
ƨꢀ Install this product in a protected location where no one can trip over  
any line or power cords. Protect cords from damage or abrasion.  
ƨꢀ If this product does not operate normally, read Troubleshooting in this  
user’s manual. If you cannot solve the problem, or if the product is dam-  
ꢂƒ‚Ɛꢀƒ„ƒꢀ’ꢀ’†ƒꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ƓꢀꢃꢀŒ’ꢀŽƒŒꢀ’†‡‘ꢀŽ‚“’ꢀƒ–ƒŽ’ꢀ‘ꢀ‹—ꢀ  
€ƒꢀ‚‡ƒ’ƒ‚ꢀ‡Œꢀ—“ꢀ“‘ƒƛ‘ꢀ‹Œ“ŠƓꢀꢉŽƒŒ‡Œꢂꢀ’†ƒꢀŽ‚“’ꢀꢀƒ‘‘ƒ‹€Š‡Œꢂꢀ‡’ꢀ  
‡Œƒ’Š—ꢀ‹—ꢀƒ–Ž‘ƒꢀ—“ꢀ’ꢀ†˜‚“‘ꢀ”Š’ꢂƒ‘ꢀꢀ’†ƒꢀ‡‘‰‘Ɠ  
ƨꢀ If this product has user-replaceable batteries, replace batteries only  
as described in your user’s manual.ꢀ ꢃꢀ Œ’ꢀ €“Œꢀ ꢀ Ž“Œ’“ƒꢀ €’’ƒ‡ƒ‘ꢀ  
— they contain caustic chemicals.  
ƨꢀ If this product has a three-prong (grounding) plug or a polarized plug  
with one wide prong, it may not fit in non-polarized outlets. ꢃꢀŒ’ꢀ‚ƒ„ƒ’ꢀ  
the purpose of these plugs. If they do not fit in your outlet, the outlet  
should be replaced by an electrician.  
CAUTION: Use only the power adapter provided with this prod-  
att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.  
51  
ɇŽŽƒŒ‚‡–  
Important safety instructions  
Especially About Cordless Telephones  
ƨꢀ Privacy: The same features that make a cordless telephone convenient  
create some limitations. Telephone calls are transmitted between the tele-  
phone base and handset by radio waves, so there is a possibility that your  
cordless telephone conversations could be intercepted by radio receiv-  
ing equipment within range of the cordless handset. For this reason, you  
should not think of cordless telephone conversations as being as pri-  
vate as those on corded telephones.  
ƨꢀ Electrical power: The telephone base of this cordless telephone must be  
connected to a working electrical outlet. The electrical outlet should not be  
controlled by a wall switch. Calls cannot be made from the handset if the  
telephone base is unplugged or switched off, or if the electrical power  
is interrupted.  
ƨꢀ Power adapter: This power adapter is intended to be plugged into a vertical  
wall outlet or a floor outlet.  
ƨꢀ Potential TV interference: Some cordless telephones operate at frequencies  
’†’ꢀ‹—ꢀ“‘ƒꢀ‡Œ’ƒ„ƒƒŒƒꢀ’ꢀꢊꢒ‘ꢀŒ‚ꢀꢒꢈꢅ‘Ɠꢀꢊꢀ‹‡Œ‡‹‡˜ƒꢀꢀŽƒ”ƒŒ’ꢀ‘“†ꢀ‡Œ’ƒ-  
ference, do not place the telephone base of the cordless telephone near or on  
’Žꢀ„ꢀꢀꢊꢒꢀꢀꢒꢈꢅƓꢀꢆ„ꢀ‡Œ’ƒ„ƒƒŒƒꢀ‡‘ꢀƒ–Žƒ‡ƒŒƒ‚Ɛꢀ‹”‡Œꢂꢀ’†ƒꢀ‚Šƒ‘‘ꢀ’ƒŠƒŽ†Œƒꢀ  
„’†ƒꢀ•—ꢀ„‹ꢀ’†ƒꢀꢊꢒꢀꢀꢒꢈꢅꢀ•‡ŠŠꢀ„’ƒŒꢀƒ‚“ƒꢀꢀƒŠ‡‹‡Œ’ƒꢀ’†ƒꢀ‡Œ’ƒ„ƒƒŒƒƓꢀ  
ƨꢀ Rechargeable batteries: This product contains either Nickel-Cadmium or  
ꢎ‡‰ƒŠƕꢐƒ’Šꢀ —‚‡‚ƒƒ†ꢂƒ€Šƒ’’ƒ‡ƒ‘Ɠ–ƒ‡‘ƒƒŒŒ‚Š‡Œꢂ’’ƒ-  
ies in order not to short the battery with conducting material such as rings,  
bracelets, and keys. The battery or conductor may overheat and cause harm.  
ꢉ€‘ƒ”ƒꢀŽŽƒꢀŽŠ‡’—ꢀ€ƒ’•ƒƒŒꢀ’†ƒꢀ€’’ƒ—ꢀŒ‚ꢀ’†ƒꢀ€’’ƒ—ꢀ†ꢂƒƓ  
ƨꢀ Nickel-cadmium rechargeable batteries: Must be recycled or disposed of  
ŽŽƒŠ—ƓꢀꢃꢀŒ’ꢀ‚‡‘Ž‘ƒꢀ„ꢀ‡Œꢀ†“‘ƒ†Š‚ꢀꢂ€ꢂƒƓꢀꢃꢀŒ’ꢀ€“ŒꢀꢀŽ“Œ’“ƒƓꢀ  
ꢄ‡‰ƒꢀ’†ƒꢀ€’’ƒ‡ƒ‘ꢀ„ꢀ’†‡‘ꢀ’—ŽƒƐꢀ‡„ꢀ€“Œƒ‚ꢀꢀŽ“Œ’“ƒ‚Ɛꢀ’†ƒ—ꢀ“Š‚ꢀƒŠƒ‘ƒꢀ  
caustic material which could cause injury.  
ꢊ†ƒꢀ ꢅɆꢅꢈSeal means that the manufacturer is voluntarily participating in an  
industry program to collect and recycle nickel-cadmium rechargeable batteries when  
taken out of service within the United States. These batteries may be taken to a participating  
ŠŠꢀƒ’‡Šƒꢀ„ꢀƒŽŠƒ‹ƒŒ’ꢀ€’’ƒ‡ƒ‘ꢀꢀƒ—Š‡ŒꢂꢀƒŒ’ƒƓꢀꢉꢀ—“ꢀ‹—ꢀŠŠꢀǍꢀƪǔnjnjƫꢀǔꢀɆɇꢊꢊꢇꢅꢋꢀ„ꢀ  
locations accepting spent nickel-cadmium Batteries.  
52  
ɇŽŽƒŒ‚‡–  
Important safety instructions  
ƨꢀ Nickel-metal hydride rechargeable batteries: ꢃ‡‘Ž‘ƒꢀ„ꢀ’†ƒ‘ƒꢀ€’’ƒ‡ƒ‘ꢀ  
‡Œꢀꢀ‘„ƒꢀ‹ŒŒƒƓꢀꢃꢀŒ’ꢀ€“ŒꢀꢀŽ“Œ’“ƒƓꢀꢄ‡‰ƒꢀ’†ƒꢀ€’’ƒ‡ƒ‘ꢀ„ꢀ’†‡‘ꢀ’—ŽƒƐꢀ  
if burned or punctured, they could release caustic material which could  
cause injury.  
ꢊ†ƒꢀ ꢅɆꢅꢈSeal means that the manufacturer is voluntarily participating in an  
industry program to collect and recycle nickel-metal rechargeable batteries when taken out of  
service within the United States. These batteries may be taken to a participating local retailer of  
ƒŽŠƒ‹ƒŒ’ꢀ €’’ƒ‡ƒ‘ꢀ ꢀ ƒ—Š‡Œꢂꢀ ƒŒ’ƒƓꢀ ꢉꢀ —“ꢀ ‹—ꢀ ŠŠꢀ Ǎꢀ ƪǔnjnjƫꢀ ǔꢀ Ɇɇꢊꢊꢇꢅꢋꢀ „ꢀ Š’‡Œ‘ꢀ  
accepting spent nickel-metal Batteries.  
Precautions for users of implanted cardiac pacemakers  
Cardiac pacemakers (applies only to digital cordless telephones):  
ꢓ‡ƒŠƒ‘‘ꢀꢊƒ†ŒŠꢂ—ꢀꢅƒ‘ƒ†ƐꢀꢄꢄꢈꢀƪꢓꢊꢅƫƐꢀŒꢀ‡Œ‚ƒŽƒŒ‚ƒŒ’ꢀƒ‘ƒ†ꢀƒŒ’‡’—ƐꢀŠƒ‚ꢀ  
a multidisciplinary evaluation of the interference between portable wireless  
telephones and implanted cardiac pacemakers. Supported by the U.S. Food  
Œ‚ꢀꢃ“ꢂꢀɇ‚‹‡Œ‡‘’’‡ŒƐꢀꢓꢊꢅꢀ†‚ꢀƒ‹‹ƒŒ‚ƒ‚ꢀ’ꢀŽ†—‘‡‡Œ‘ꢀ’†’ƒ  
Pacemaker patients  
ƨꢀ ꢌ†“Š‚ꢀ‰ƒƒŽꢀ•‡ƒŠƒ‘‘ꢀ’ƒŠƒŽ†Œƒ‘ꢀ’ꢀŠƒ‘’ꢀ‘‡–ꢀ‡Œ†ƒ‘ꢀ„‹ꢀ’†ƒꢀŽƒ‹‰ƒƓ  
ƨꢀ ꢌ†“Š‚ꢀꢎꢉꢊŽŠƒꢀ•‡ƒŠƒ‘‘ꢀ’ƒŠƒŽ†Œƒ‘ꢀ‚‡ƒ’Š—ꢀ”ƒꢀ’†ƒꢀŽƒ‹‰ƒƐꢀ‘“†ꢀ  
‘ꢀ‡Œꢀꢀ€ƒ‘’ꢀŽ‰ƒ’Ɛꢀ•†ƒŒꢀ‡’ꢀ‡‘ꢀ’“Œƒ‚ꢀꢉꢎƓ  
ƨꢀ ꢌ†“Š‚ꢀ“‘ƒꢀ’†ƒꢀ•‡ƒŠƒ‘‘ꢀ’ƒŠƒŽ†Œƒꢀ’ꢀ’†ƒꢀƒꢀŽŽ‘‡’ƒꢀ’†ƒꢀŽƒ‹‰ƒƓ  
ꢓꢊꢅƛ‘ꢀƒ”Š“’‡Œꢀ‚‡‚ꢀŒ’ꢀ‡‚ƒŒ’‡„—ꢀŒ—ꢀ‡‘‰ꢀ’ꢀ€—‘’Œ‚ƒ‘ꢀ•‡’†ꢀŽƒ‹‰ƒ‘ꢀ„‹ꢀ  
other persons using wireless telephones.  
Especially about telephones answering systems  
Two-way recording:This telephone does not sound warning beeps to let the other  
party know that the call is being recorded. To ensure that you are in compliance  
with any federal or state regulations regarding recording a telephone call, you  
should start the recording process and then inform the other party that you are  
recording the call.  
SAVE THESE INSTRUCTIONS  
53  
ɇŽŽƒŒ‚‡–  
FCC Part 68 & ACTA  
This equipment complies with Part 68 of the FCC rules and with technical  
requirements adopted by the Administrative Council for Terminal Attachments  
(ACTA). The label on the back or bottom of this equipment contains, among  
other things, a product identifier in the format US: AAAEQ##TXXXX. This iden-  
tifier must be provided to your local telephone company upon request.  
The plug and jack used to connect this equipment to premises wiring and the  
telephone network must comply with applicable Part 68 rules and technical  
requirements adopted by ACTA. A compliant telephone cord and modular plug  
is provided with this product. It is designed to be connected to a compatible  
‹‚“Šˆ‰†’Š‘‹ŽŠ‡Œ’ƓɇŒꢔǍǍˆ‰†“Š‚Œ‹ŠŠ—ƒ‘ƒ‚ꢀ  
„ꢀŒŒƒ’‡Œꢂꢀ’ꢀꢀ‘‡ŒꢂŠƒꢀŠ‡ŒƒꢀŒ‚ꢀŒꢀꢅꢔǍǐꢀˆ‰ꢀ„ꢀ’•ꢀŠ‡Œƒ‘ƓꢀꢌƒƒꢀꢆŒ‘’ŠŠ’‡Œꢀ  
Instructions in the user’s manual.  
ꢊ†ƒꢀꢅ‡Œꢂƒꢀꢇ“‡”ŠƒŒƒꢀꢎ“‹€ƒꢀƪꢅꢇꢎƫꢀ‡‘ꢀ“‘ƒ‚ꢀ’ꢀ‚ƒ’ƒ‹‡Œƒꢀ†•ꢀ‹Œ—ꢀ‚ƒ”‡ƒ‘ꢀ  
you may connect to your telephone line and still have them ring when you  
ƒꢀŠŠƒ‚Ɠꢀꢊ†ƒꢀꢅꢇꢎꢀ„ꢀ’†‡‘ꢀŽ‚“’ꢀ‡‘ꢀƒŒ‚ƒ‚ꢀ‘ꢀ’†ƒꢀǒ’†ꢀŒ‚ꢀǓ’†ꢀ†’ƒ‘ꢀ  
„ŠŠ•‡Œꢂꢀ’†ƒꢀꢁꢌƒꢀ‡Œꢀ’†ƒꢀŽ‚“’ꢀ‡‚ƒŒ’‡„‡ƒꢀƪƒƓꢂƓƐꢀ‡„ꢀNJNJꢀ‡‘ꢀnjǏƐꢀ’†ƒꢀꢅꢇꢎꢀ‡‘ꢀnjƓǏƫƓꢀꢆŒꢀ  
‹‘’Ɛ“’Œ’ŠŠƒ‘Ɛ†ƒ“‹ŠŠꢇꢎ‘†“Š‚ƒ‡”ƒƪǑƓnjƫŠƒ‘‘Ɠꢀ  
more information, please contact your local telephone company.  
ꢊ†‡‘ꢀƒ“‡Ž‹ƒŒ’ꢀ‹—ꢀŒ’ꢀ€ƒꢀ“‘ƒ‚ꢀ•‡’†ꢀꢍ’—ꢀꢄ‡Œƒ‘Ɠꢀꢆ„ꢀ—“ꢀ†”ƒꢀ‘Žƒ‡ŠŠ—ꢀ•‡ƒ‚ꢀ  
alarm dialing equipment connected to your telephone line, ensure the con-  
nection of this equipment does not disable your alarm equipment. If you have  
questions about what will disable alarm equipment, consult your telephone  
company or a qualified installer.  
If this equipment is malfunctioning, it must be unplugged from the modular jack  
“Œ’‡Šꢀ’†ƒꢀŽ€Šƒ‹ꢀ†‘ꢀ€ƒƒŒꢀƒ’ƒ‚ƓꢀꢅƒŽ‡‘ꢀ’ꢀ’†‡‘ꢀ’ƒŠƒŽ†Œƒꢀƒ“‡Ž‹ƒŒ’ꢀŒꢀ  
only be made by the manufacturer or its authorized agents. For repair proce-  
‚“ƒ‘Ɛꢀ„ŠŠ•ꢀ’†ƒꢀ‡Œ‘’“’‡Œ‘ꢀ“’Š‡Œƒ‚ꢀ“Œ‚ƒꢀ’†ƒꢀꢄ‡‹‡’ƒ‚ꢀꢓŒ’—Ɠ  
If this equipment is causing harm to the telephone network, the telephone  
company may temporarily discontinue your telephone service. The telephone  
company is required to notify you before interrupting service. If advance notice  
is not practical, you will be notified as soon as possible. You will be given the  
opportunity to correct the problem and the telephone company is required to  
inform you of your right to file a complaint with the FCC. Your telephone com-  
pany may make changes in its facilities, equipment, operation, or procedures  
that could affect the proper functioning of this product. The telephone company  
is required to notify you if such changes are planned.  
If this product is equipped with a corded or cordless handset, it is hearing aid  
compatible.  
If this product has memory dialing locations, you may choose to store emer-  
gency telephone numbers (e.g., police, fire, medical) in these locations. If you  
do store or test emergency numbers, please:  
ƨꢀ ꢅƒ‹‡ŒꢀŒꢀ’†ƒꢀŠ‡ŒƒꢀŒ‚ꢀ€‡ƒ„Š—ꢀƒ–ŽŠ‡Œꢀ’†ƒꢀƒ‘Œꢀ„ꢀ’†ƒꢀŠŠꢀ€ƒ„ƒꢀ†Œꢂ‡Œꢂꢀ“ŽƓ  
ƨꢀ ꢍƒ„‹ꢀ‘“†ꢀ’‡”‡’‡ƒ‘ꢀ‡Œꢀ„„ƕŽƒ‰ꢀ†“‘Ɛꢀ‘“†ꢀ‘ꢀƒŠ—ꢀ‹Œ‡ŒꢂꢀꢀŠ’ƒꢀƒ”ƒŒ‡ŒꢂƓ  
54  
ɇŽŽƒŒ‚‡–  
FCC Part 15  
This equipment has been tested and found to comply with the requirements  
for a Class B digital device under Part 15 of the Federal Communications  
Commission (FCC) rules.  
These requirements are intended to provide reasonable protection against  
harmful interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and used  
in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not  
occur in a particular installation.  
If this equipment does cause harmful interference to radio or television recep-  
tion, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the follow-  
ing measures:  
ƨꢀꢀꢅƒ‡ƒŒ’ꢀꢀƒŠ’ƒꢀ’†ƒꢀƒƒ‡”‡ŒꢂꢀŒ’ƒŒŒƓ  
ƨꢀ ꢆŒƒ‘ƒꢀ’†ƒꢀ‘ƒŽ’‡Œꢀ€ƒ’•ƒƒŒꢀ’†ƒꢀƒ“‡Ž‹ƒŒ’ꢀŒ‚ꢀƒƒ‡”ƒƓ  
ƨꢀ ꢈŒŒƒ’ꢀ’†ƒꢀƒ“‡Ž‹ƒŒ’ꢀ‡Œ’ꢀŒꢀ“’Šƒ’ꢀŒꢀꢀ‡“‡’ꢀ‚‡„„ƒƒŒ’ꢀ„‹ꢀ’†’ꢀ’ꢀ  
which the receiver is connected.  
ƨꢀ ꢈŒ‘“Š’ꢀ’†ƒꢀ‚ƒŠƒꢀꢀŒꢀƒ–Žƒ‡ƒŒƒ‚ꢀ‚‡Ƥꢊꢒꢀ’ƒ†Œ‡‡Œꢀ„ꢀ†ƒŠŽƓ  
ꢈ†Œꢂƒ‘ꢀ ꢀ ‹‚‡„‡’‡Œ‘ꢀ ’ꢀ ’†‡‘ꢀ ƒ“‡Ž‹ƒŒ’ꢀ Œ’ꢀ ƒ–Žƒ‘‘Š—ꢀ ŽŽ”ƒ‚ꢀ €—ꢀ ’†ƒꢀ  
party responsible for compliance could void the user’s authority to operate  
the equipment.  
To ensure safety of users, the FCC has established criteria for the amount of  
radio frequency energy that can be safely absorbed by a user or bystander  
according to the intended usage of the product. This product has been tested  
and found to comply with the FCC criteria. The handset may be safely held  
against the ear of the user. The telephone base shall be installed and used  
such that parts of the user’s body other than the hands are maintained at a  
‚‡‘’ŒƒŽŽ–‡‹’ƒŠ—ǎnjƪǔŒ†ƒ‘ƫƒƓ“†‘ƒ‘ƒꢀ  
clipping device, please make sure to only use the supplied AT&T belt clip.  
55  
ɇŽŽƒŒ‚‡–  
Limited warranty  
The AT&T brand is used under license - any repair, replacement  
or warranty service, and all questions about this product should  
be directed to: In the United States of America visit our website  
dial 1 (866) 288-4268.  
ǍƓꢀꢓ†’ꢀ‚ƒ‘ꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ꢀ”ƒƘ  
The manufacturer of this AT&T-branded product warrants to the holder of  
ꢀ ”Š‡‚ꢀ Ž„ꢀ „ꢀ Ž“†‘ƒꢀ ƪƜꢈꢉꢎꢌꢁꢐꢇꢅƝꢀ ꢀ Ɯ—“Ɲƫꢀ ’†’ꢀ ’†ƒꢀ Ž‚“’ꢀ Œ‚ꢀ ŠŠꢀ  
ƒ‘‘‡ƒ‘ꢀŽ”‡‚ƒ‚ꢀ‡Œꢀ’†ƒꢀ‘Šƒ‘ꢀŽ‰ꢂƒꢀƪƜꢍꢅꢉꢃꢁꢈꢊƝƫꢀƒꢀ„ƒƒꢀ„‹ꢀ‚ƒ„ƒ’‘ꢀ  
in material and workmanship, pursuant to the following terms and conditions,  
•†ƒŒꢀ‡Œ‘’ŠŠƒ‚ꢀŒ‚ꢀ“‘ƒ‚ꢀŒ‹ŠŠ—ꢀŒ‚ꢀ‡Œꢀ‚Œƒꢀ•‡’†ꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀŽƒ-  
’‡ŒꢂŒ‘’“’‡Œ‘Ɠ†‡‘Š‡‹‡’ƒ‚Œ’—ƒ–’ƒŒ‚‘ŒŠ—†ƒꢉꢎꢌꢁꢐꢇꢅꢀ  
products purchased and used in the United States of America and Canada.  
ǎƓꢀ ꢓ†’ꢀ •‡ŠŠꢀ €ƒꢀ ‚Œƒꢀ ‡„ꢀ ’†ƒꢀ ꢍꢅꢉꢃꢁꢈꢊꢀ ‡‘ꢀ Œ’ꢀ „ƒƒꢀ „‹ꢀ ‚ƒ„ƒ’‘ꢀ ‡Œꢀ ‹’ƒ‡Š‘ꢀ  
and workmanship during the limited warranty period (“materially defective  
ꢍꢅꢉꢃꢁꢈꢊƝƫƘ  
ꢀ ꢃ“‡Œꢂꢀ ’†ƒꢀ Š‡‹‡’ƒ‚ꢀ •Œ’—ꢀ Žƒ‡‚Ɛꢀ ’†ƒꢀ ‹Œ“„’“ƒƛ‘ꢀ “’†‡˜ƒ‚ꢀ ‘ƒ”‡ƒꢀ  
representative will repair or replace at the manufacturer’s option, without  
†ꢂƒƐꢀ ꢀ ‹’ƒ‡ŠŠ—ꢀ ‚ƒ„ƒ’‡”ƒꢀ ꢍꢅꢉꢃꢁꢈꢊƓꢀ ꢆ„ꢀ ’†ƒꢀ ‹Œ“„’“ƒꢀ ƒŽ‡‘ꢀ ’†ƒꢀ  
ꢍꢅꢉꢃꢁꢈꢊƐꢀ’†ƒ—ꢀ‹—ꢀ“‘ƒꢀŒƒ•ꢀꢀƒ„“€‡‘†ƒ‚ꢀƒŽŠƒ‹ƒŒ’ꢀŽ’‘Ɠꢀꢆ„ꢀ’†ƒꢀ‹Œ-  
“„’“ƒꢀ†‘ƒ‘ꢀ’ꢀƒŽŠƒꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊƐꢀ’†ƒ—ꢀ‹—ꢀƒŽŠƒꢀ‡’ꢀ•‡’†ꢀꢀŒƒ•ꢀ  
ƒ„“€‡‘†ƒ‚ꢅꢉꢃꢁꢈꢊ†ƒ‹ƒ‡‹‡Šƒ‘‡ꢂŒƓ†ƒŒ“„’“ƒꢀ  
•‡ŠŠꢀƒ’‡Œꢀ‚ƒ„ƒ’‡”ƒꢀŽ’‘Ɛꢀ‹‚“Šƒ‘Ɛꢀꢀƒ“‡Ž‹ƒŒ’ƓꢀꢅƒŽ‡ꢀꢀƒŽŠƒ‹ƒŒ’ꢀ„ꢀ  
’†ƒꢅꢉꢃꢁꢈꢊƐ†ƒŒ“„’“ƒƛ‘Ž’‡ŒƐ“ƒ–Š“‘‡”ƒƒ‹ƒ‚—Ɠ†ƒꢀ  
manufacturer will return repaired or replacement products to you in work-  
‡ŒꢂꢀŒ‚‡’‡ŒƓꢀꢋ“ꢀ‘†“Š‚ꢀƒ–Žƒ’ꢀ’†ƒꢀƒŽ‡ꢀꢀƒŽŠƒ‹ƒŒ’ꢀ’ꢀ’‰ƒꢀŽŽ–‡-  
mately 30 days.  
ǏƓꢀ •ꢀŠŒꢂꢀ‡‘ꢀ’†ƒꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ꢀŽƒ‡‚Ƙ  
ꢀ ꢊ†ƒꢀ Š‡‹‡’ƒ‚ꢀ •Œ’—ꢀ Žƒ‡‚ꢀ „ꢀ ’†ƒꢀ ꢍꢅꢉꢃꢁꢈꢊꢀ ƒ–’ƒŒ‚‘ꢀ „ꢀ ꢉꢎꢇꢀ ƪǍƫꢀ ꢋꢇɇꢅꢀ  
from the date of purchase. If the manufacturer repairs or replaces a materi-  
ŠŠ—ꢀ‚ƒ„ƒ’‡”ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀ“Œ‚ƒꢀ’†ƒꢀ’ƒ‹‘ꢀ„ꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—Ɛꢀ’†‡‘ꢀŠ‡‹‡’-  
ƒ‚ꢀ•Œ’—ꢀŠ‘ꢀŽŽŠ‡ƒ‘ꢀ’ꢀƒŽ‡ƒ‚ꢀꢀƒŽŠƒ‹ƒŒ’ꢀꢍꢅꢉꢃꢁꢈꢊꢀ„ꢀꢀŽƒ‡‚ꢀ  
„ꢀƒ‡’†ƒꢀƪƫꢀǕnjꢀ‚—‘ꢀ„‹ꢀ’†ƒꢀ‚’ƒꢀ’†ƒꢀƒŽ‡ƒ‚ꢀꢀƒŽŠƒ‹ƒŒ’ꢀꢍꢅꢉꢃꢁꢈꢊꢀ  
is shipped to you or (b) the time remaining on the original one-year limited  
warranty; whichever is longer.  
56  
ɇŽŽƒŒ‚‡–  
Limited warranty  
ǐƓꢀꢓ†’ꢀ‡‘ꢀŒ’ꢀ”ƒƒ‚ꢀ€—ꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—Ƙ  
This limited warranty does not cover:  
ƨꢀ ꢍꢅꢉꢃꢁꢈꢊꢀ’†’ꢀ†‘ꢀ€ƒƒŒꢀ‘“€ˆƒ’ƒ‚ꢀ’ꢀ‹‡‘“‘ƒƐꢀ‡‚ƒŒ’Ɛꢀ‘†‡ŽŽ‡Œꢂꢀꢀ’†ƒꢀ  
physical damage, improper installation, abnormal operation or handling,  
neglect, inundation, fire, water, or other liquid intrusion; or  
ƨꢀ ꢍꢅꢉꢃꢁꢈꢊꢀ’†’ꢀ†‘ꢀ€ƒƒŒꢀ‚‹ꢂƒ‚ꢀ‚“ƒꢀ’ꢀƒŽ‡ƐꢀŠ’ƒ’‡ŒƐꢀꢀ‹‚‡„‡-  
tion by anyone other than an authorized service representative of the  
manufacturer; or  
ƨꢀ ꢍꢅꢉꢃꢁꢈꢊꢀ’ꢀ’†ƒꢀƒ–’ƒŒ’ꢀ’†’ꢀ’†ƒꢀŽ€Šƒ‹ꢀƒ–Žƒ‡ƒŒƒ‚ꢀ‡‘ꢀ“‘ƒ‚ꢀ€—ꢀ‘‡ꢂŒŠꢀ  
conditions, network reliability or cable or antenna systems; or  
ƨꢀ ꢍꢅꢉꢃꢁꢈꢊꢀ’ꢀ’†ƒꢀƒ–’ƒŒ’ꢀ’†’ꢀ’†ƒꢀŽ€Šƒ‹ꢀ‡‘ꢀ“‘ƒ‚ꢀ€—ꢀ“‘ƒꢀ•‡’†ꢀŒŒƕɇꢊſꢊꢀ  
accessories; or  
ƨꢀ ꢍꢅꢉꢃꢁꢈꢊꢀ •†‘ƒꢀ •Œ’—Ƥ“Š‡’—ꢀ ‘’‡‰ƒ‘Ɛꢀ ꢍꢅꢉꢃꢁꢈꢊꢀ ‘ƒ‡Šꢀ Œ“‹€ƒꢀ  
plates or electronic serial numbers have been removed, altered or ren-  
dered illegible; or  
ƨꢀ ꢍꢅꢉꢃꢁꢈꢊꢀŽ“†‘ƒ‚Ɛꢀ“‘ƒ‚Ɛꢀ‘ƒ”‡ƒ‚Ɛꢀꢀ‘†‡ŽŽƒ‚ꢀ„ꢀƒŽ‡ꢀ„‹ꢀ“’‘‡‚ƒꢀ’†ƒꢀ  
United States of America or Canada, or used for commercial or institutional  
purposes (including but not limited to products used for rental purposes); or  
ƨꢀ ꢍꢅꢉꢃꢁꢈꢊꢀƒ’“Œƒ‚ꢀ•‡’†“’ꢀ”Š‡‚ꢀŽ„ꢀ„ꢀŽ“†‘ƒꢀƪ‘ƒƒꢀ‡’ƒ‹ꢀǒꢀ€ƒŠ•ƫƑꢀ  
ƨꢀ ꢈ†ꢂƒ‘Œ‘’ŠŠ’‡Œƒ’“ŽƐ‚ˆ“‘’‹ƒŒ’“‘’‹ƒŒ’Š‘ƐŒ‚ꢀ  
installation or repair of systems outside the telephone.  
ǑƓꢀ •ꢀ‚ꢀ—“ꢀꢂƒ’ꢀ•Œ’—ꢀ‘ƒ”‡ƒƘ  
To obtain warranty service in the United States of America, call  
1 (800) 222-3111; In Canada, please dial 1 (866) 288-4268.  
ꢎꢉꢊꢇƒɆƒ„ƒŠŠ‡Œꢂƒ”‡ƒƐŽŠƒ‘ƒꢀƒ”‡ƒ•ꢀ’†ƒꢀ“‘ƒƛ‘ꢀ‹Œ“Šꢀƕꢀꢀ†ƒ‰ꢀ  
„ꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀŒ’Š‘ꢀŒ‚ꢀ„ƒ’“ƒ‘ꢀ‹—ꢀ‘”ƒꢀ—“ꢀꢀ‘ƒ”‡ƒꢀŠŠƓ  
ꢀ ꢇ–ƒŽ’ꢀ‘ꢀŽ”‡‚ƒ‚ꢀ€—ꢀŽŽŠ‡€ŠƒꢀŠ•Ɛꢀ—“ꢀ‘‘“‹ƒꢀ’†ƒꢀ‡‘‰ꢀ„ꢀŠ‘‘ꢀꢀ‚‹ꢂƒꢀ  
during transit and transportation and are responsible for delivery or handling  
†ꢂƒ‘Œ“ƒ‚Œ†ƒŒ‘Ž’†ƒꢅꢉꢃꢁꢈꢊƪ‘ƫ†ƒƒ”‡ƒŠ’‡ŒƓꢀ  
ꢊ†ƒꢀ‹Œ“„’“ƒꢀ•‡ŠŠꢀƒ’“ŒꢀƒŽ‡ƒ‚ꢀꢀƒŽŠƒ‚ꢀꢍꢅꢉꢃꢁꢈꢊꢀ“Œ‚ƒꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ  
warranty to you, transportation, delivery or handling charges prepaid. The  
‹Œ“„’“ƒꢀ‘‘“‹ƒ‘ꢀŒꢀ‡‘‰ꢀ„ꢀ‚‹ꢂƒꢀꢀŠ‘‘ꢀ„ꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀ‡Œꢀ’Œ‘‡’Ɠꢀ  
ꢆ„ꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀ„‡Š“ƒꢀ‡‘ꢀŒ’ꢀ”ƒƒ‚ꢀ€—ꢀ’†‡‘ꢀŠ‡‹‡’ƒ‚ꢀ•Œ’—ƐꢀꢀŽ„ꢀ„ꢀŽ“-  
chase does not meet the terms of this limited warranty, the manufacturer will  
notify you and will request that you authorize the cost of repair prior to any  
further repair activity. You must pay for the cost of repair and return shipping  
costs for the repair of products that are not covered by this limited warranty.  
57  
ɇŽŽƒŒ‚‡–  
Limited warranty  
ǒƓꢀꢓ†’ꢀ‹“‘’ꢀ—“ꢀƒ’“Œꢀ•‡’†ꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀ’ꢀꢂƒ’ꢀ•Œ’—ꢀ‘ƒ”‡ƒƘ  
You must:  
Ɠꢀꢅƒ’“Œꢀ’†ƒꢀƒŒ’‡ƒꢀ‡ꢂ‡ŒŠꢀŽ‰ꢂƒꢀŒ‚ꢀŒ’ƒŒ’‘ꢀ‡ŒŠ“‚‡Œꢂꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀ  
to the service location along with a description of the malfunction or dif-  
ficulty; and  
€ƓꢀꢆŒŠ“‚ƒꢀƜ”Š‡‚ꢀŽ„ꢀ„ꢀŽ“†‘ƒƝꢀƪ‘Šƒ‘ꢀƒƒ‡Ž’ƫꢀ‡‚ƒŒ’‡„—‡Œꢂꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀ  
Ž“†‘ƒ‚ꢀƪꢍꢅꢉꢃꢁꢈꢊꢀ‹‚ƒŠƫꢀŒ‚ꢀ’†ƒꢀ‚’ƒꢀ„ꢀŽ“†‘ƒꢀꢀƒƒ‡Ž’ƑꢀŒ‚  
c. Provide your name, complete and correct mailing address, and telephone  
number.  
ǓƓꢀꢉ’†ƒꢀŠ‡‹‡’’‡Œ‘  
ꢀ ꢊ†‡‘ꢀ•Œ’—ꢀ‡‘ꢀ’†ƒꢀ‹ŽŠƒ’ƒꢀŒ‚ꢀƒ–Š“‘‡”ƒꢀꢂƒƒ‹ƒŒ’ꢀ€ƒ’•ƒƒŒꢀ—“ꢀŒ‚ꢀ’†ƒꢀ  
‹Œ“„’“ƒꢀ„ꢀ’†‡‘ꢀɇꢊſꢊꢀ€Œ‚ƒ‚ꢀꢍꢅꢉꢃꢁꢈꢊƓꢀꢆ’ꢀ‘“Žƒ‘ƒ‚ƒ‘ꢀŠŠꢀ’†ƒꢀ•‡’’ƒŒꢀ  
ꢀŠꢀ‹‹“Œ‡’‡Œ‘ꢀƒŠ’ƒ‚ꢀ’ꢀ’†‡‘ꢀꢍꢅꢉꢃꢁꢈꢊƓꢀꢊ†ƒꢀ‹Œ“„’“ƒꢀŽ”‡‚ƒ‘ꢀ  
Œꢀ’†ƒꢀ•Œ’‡ƒ‘ꢀ„ꢀ’†‡‘ꢀꢍꢅꢉꢃꢁꢈꢊƓꢀꢊ†ƒꢀ•Œ’—ꢀƒ–Š“‘‡”ƒŠ—ꢀ‚ƒ‘‡€ƒ‘ꢀŠŠꢀ  
„ꢀ ’†ƒꢀ ‹Œ“„’“ƒƛ‘ꢀ ƒ‘ŽŒ‘‡€‡Š‡’‡ƒ‘ꢀ ƒꢂ‚‡Œꢂꢀ ’†ƒꢀ ꢍꢅꢉꢃꢁꢈꢊƓꢀ ꢊ†ƒƒꢀ ƒꢀ Œꢀ  
’†ƒꢀƒ–Žƒ‘‘ꢀ•Œ’‡ƒ‘ƓꢀꢎꢀŒƒꢀ‡‘ꢀ“’†‡˜ƒ‚ꢀ’ꢀ‹‰ƒꢀ‹‚‡„‡’‡Œ‘ꢀ’ꢀ’†‡‘ꢀ  
limited warranty and you should not rely on any such modification.  
ꢀ ꢌ’’ƒƤꢍ”‡Œ‡Šꢀ ꢄ•ꢀ ꢅ‡ꢂ†’‘ƒꢀ ꢊ†‡‘ꢀ •Œ’—ꢀ ꢂ‡”ƒ‘ꢀ —“ꢀ ‘Žƒ‡„‡ꢀ ŠƒꢂŠꢀ ‡ꢂ†’‘Ɛꢀ  
and you may also have other rights which vary from state to state or prov-  
ince to province.  
ꢀ ꢄ‡‹‡’’‡Œ‘ƒꢀ ꢆ‹ŽŠ‡ƒ‚ꢀ •Œ’‡ƒ‘Ɛꢀ ‡ŒŠ“‚‡Œꢂꢀ ’†‘ƒꢀ „ꢀ „‡’Œƒ‘‘ꢀ „ꢀ ꢀ Ž’‡“Šꢀ  
Ž“Ž‘ƒŒ‚ƒ†Œ’€‡Š‡’—ƪŒ•‡’’ƒŒŒ’—†’†ƒꢅꢉꢃꢁꢈꢊ‘ꢀ  
fit for ordinary use) are limited to one year from date of purchase. Some  
states/provinces do not allow limitations on how long an implied warranty  
lasts, so the above limitation may not apply to you. In no event shall the  
manufacturer be liable for any indirect, special, incidental, consequential, or  
similar damages (including, but not limited to lost profits or revenue, inabil-  
‡’—ꢀ’ꢀ“‘ƒꢀ’†ƒꢀꢍꢅꢉꢃꢁꢈꢊꢀꢀ’†ƒꢀ‘‘‡’ƒ‚ꢀƒ“‡Ž‹ƒŒ’Ɛꢀ’†ƒꢀ‘’ꢀ„ꢀ‘“€‘’‡-  
tute equipment, and claims by third parties) resulting from the use of this  
ꢍꢅꢉꢃꢁꢈꢊƓ‹ƒ’’ƒ‘ƤŽ”‡Œƒ‘Œ’ŠŠ•†ƒƒ–Š“‘‡ŒŠ‡‹‡’’‡Œꢀ  
„Œ‡‚ƒŒ’ŠŒ‘ƒ“ƒŒ’‡Š‹ꢂƒ‘Ɛ†ƒ€”ƒŠ‡‹‡’’‡Œƒ–Š“-  
sion may not apply to you.  
Please retain your original sales receipt as  
proof of purchase.  
58  
ɇŽŽƒŒ‚‡–  
Technical specifications  
RF frequency band  
5857.2MHz — 5865.9MHz  
(handset to telephone base)  
RF frequency band  
912.75 MHė — 917.10 MHz  
(telephone base to handset)  
Channels  
30  
Modulation  
FM  
Operating temperature  
32°F — 122°F  
0°C — 50°C  
Telephone base voltage  
(AC voltage, 60Hz)  
104 — 129Vrms  
Telephone base voltage  
(AC adapter output)  
ꢃꢈǕꢒꢀƼǏnjnj‹ɇ  
Handset voltage  
ꢃꢈǏƓǍꢀƧꢀǐƓǏꢒꢀǐnjnj‹ɇ†  
ꢃꢈǕꢒꢀƼǍǑnj‹ɇ  
Charger voltage  
(AC adapter output)  
Rechargeable battery  
3.6V 400mAh  
Telephone operating range  
ꢊ†‡‘ꢀ ‚Šƒ‘‘ꢀ ’ƒŠƒŽ†Œƒꢀ Žƒ’ƒ‘ꢀ •‡’†ꢀ ’†ƒꢀ ‹–‡‹“‹ꢀ Ž•ƒꢀ ŠŠ•ƒ‚ꢀ €—ꢀ ’†ƒꢀ  
Federal Communications Commission (FCC). Even so, the handset(s) and tele-  
phone base can communicate over only a certain distance - which can vary  
with the locations of the telephone base and handset(s), the weather, the lay-  
out, and the construction of your home or office.  
59  
ɇŽŽƒŒ‚‡–  
Index  
A
I
Alert tones, 42  
Answering calls, 14  
Answering system, 33-41  
Incoming call summary, 28  
Incoming calls, answering, 14  
Indicator lights, 42  
B
L
Battery charging, 7  
Battery installation, 7  
Battery low, 7  
ꢄ‘’ꢀŒ“‹€ƒꢀƒ‚‡ŠƐꢀǍǑ  
M
Making calls, 14  
Menus, 2  
Message playback, 37  
Missed calls, 29  
Mute, 17  
Belt clip, 10  
C
Call waiting, 17  
Call transfer, 18-20  
ꢈŠŠƒꢀꢆꢃƐꢀǎǓ  
N
add entries to the directory, 32  
delete entries, 31  
dial entries, 30  
Names,  
enter into directory, 23  
search for, 25  
Channel, 17  
Call screening, 40  
Call intercept, 40  
P
Power adapter, 6  
D
Q
ꢃƒŠƒ’ƒꢀŠŠꢀ‘“‹‹—ꢀƒŒ’‡ƒ‘ƐꢀǏǍ  
ꢃƒŠƒ’ƒꢀƒ‚‡ŠꢀƒŒ’‡ƒ‘ƐꢀǍǑ  
ꢃ‡Š‡ŒꢂƐꢀ  
Quick reference guide, 2-3  
R
directory dialing, 26  
„‹ꢀꢀꢈꢆꢃꢀƒ‚ƐꢀǏnj  
mode, 11  
ꢅƒƒ‡”‡ŒꢂꢀŠŠ‘ƐꢀǍǐ  
ꢅƒ†ꢂ‡ŒꢂƐꢀǓ  
ꢅƒ‚‡ŠƐꢀǍǑ  
ꢅ‡Œꢂꢀ‘‡ŠƒŒ‡ŒꢂƐꢀǍǑ  
ꢅ‡Œꢂƒꢀ‘“Œ‚ƐꢀǍǎ  
ꢅ‡Œꢂƒꢀ”Š“‹ƒƐꢀǍǏ  
ꢃ‡ƒ’—ƐꢀǎǍ  
dial number, 26  
edit entries, 26  
make an entry, 26  
search, 25  
S
ꢃꢌꢄꢀ„‡Š’ƒƐꢀǒ  
Screen display messages, 43-44  
Search for names, 25  
Speakerphone, 14  
E
Elapsed time, 14  
T
F
Technical specifications, 59  
Temporary tone dialing, 17  
Troubleshooting, 45  
Flash (switchhook flash), 17  
H
V
Hands-free use, 14  
Handset locator, 16  
Headset, 10  
Volume control, 17  
Voice prompts, 33  
60  
ɇŽŽƒŒ‚‡–  
Remote access wallet card  
Use the wallet card below to help you remember commands to control your  
answering system from any touch tone telephone.  
Cut along dotted line.  
Call your phone number, then  
enter your two-digit access code  
(preset to 19).  
Action  
Remote command  
Play all messages..................1  
Play new messages...............2  
ꢃƒŠƒ’ƒꢀ’†ƒꢀ‹ƒ‘‘ꢂƒ..............3  
ꢃƒŠƒ’ƒꢀŠŠꢀŠ‚ꢀ‹ƒ‘‘ꢂƒ‘ .....33  
ꢅƒŽƒ’ꢀꢀꢂꢀ€‰.................4  
Stop...............................................5  
Help menu.................................*5  
Fold here.  
Skip the message...................6  
ꢅƒ‚ꢀŒŒ“Œƒ‹ƒŒ’ ........*7  
Turn system off or on..........0  
End remote access call ......8(or hang up)  
E5812B/E5813B/E5814B/E1812B/E1813B/E1814B  
5.8 GHz cordless telephone/answering system  
© 2007 Advanced American Telephones. All rights reserved.  
AT&T and the AT&T logo are trademarks of AT&T Knowledge Ventures,  
licensed to Advanced American Telephones. Printed in China.  
© 2007 Advanced American Telephones. All rights reserved.  
AT&T and the AT&T logo are trademarks of AT&T Knowledge Ventures,  
licensed to Advanced American Telephones. Printed in China. Issue 6 AT&T 07/07.  
91-001093-040-100  

HP Hewlett Packard Hewlett Packard Computer Monitor TFT7600 G2 User Manual
HANNspree LIQUID CRYSTAL DISPLAY HF237 User Manual
EPoX Computer KP6 FX2 User Manual
Dacor Cooktop DR30GIFS User Manual
Cypress FLEx36 CYD02S36V User Manual
Asus Xonar DGX PCI Express 5 1 channel Gaming Audio Card Xonar DGX User Manual
Asus P4P8X User Manual
Asus Motherboard SABERTOOTHZ87 User Manual
AG Neovo Neovo TS 17R User Manual
Advantech Computer Monitor ADAM 4561 User Manual