User's Manual
5.8 GHz Expansion
Handset E560-2/E560-5
For use with AT&T
model E5640/E5643B/
E5644B/E5655
IMPORTANT
Information about caller ID with call waiting
This product has a caller ID with call waiting feature which works
with service from your local telephone service provider.
Caller ID with call waiting lets you see the name of the caller
before answering the telephone, even when on another call.
You may need to change your phone service to use this
feature. Contact your telephone service provider if:
• you have both caller ID and call waiting, but as separate
services (you may need combined service).
• you have only caller ID service, or only call waiting service.
• you don’t subscribe to any caller ID or call waiting services.
You can use this product with regular caller ID service, or you
can use this product’s other features without subscribing to
either caller ID or combined caller ID with call waiting service.
There are fees for caller ID services, but these may not be
available in all areas.
Depending on your service subscription, you may see the caller’s number, or the
caller’s name and number. This product can provide information only if both
you and the caller are in areas offering caller ID service, and if both telephone
companies use compatible equipment. The time and date are sent by the service
provider along with the call information.
Copyright © 2006 Advanced AmericanTelephones. All rights reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced AmericanTelephones.
You must charge the
battery and register the
handset before use.
See pages 2-3
for easy instructions.
STOP!
For customer service or product
information, visit our web site at
Please also read
Important safety
information on pages 20-
24.
or call 1 (800) 222-3111.
Table of contents
Quick reference guide.............................1
Before you begin.......................................2
Parts checklist............................................2
Battery & charger installation................3
Adding new handsets...............................4
Replacing a handset..................................7
Re-registering a handset..........................9
Belt clip & optional headset .................11
Troubleshooting.......................................12
Important safety information...............20
FCC Part 68 and ACTA.........................25
FCC Part 15.............................................27
Limited warranty.....................................28
Copyright © 2006 Advanced American Telephones. All rights reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones.
Quick reference guide
For complete instructions, please refer to the manual provided with
your E5640, E5643B, E5644B or E5655 telephone. If your manual for
the above models has been misplaced, you may download it from
Handset
^ CID
Press to scroll up in menus.
SELECT/MENU
Press to display menu, or to select
highlighted item from menu.
Press when phone is not in use to
display caller ID information. While
entering names or numbers, press to
move the cursor to the left.
DIRV
Press to scroll down in menus.
Press when phone is not in use to
display directory entries. While entering
names, press to advance cursor.
PHONE/FLASH
Press to make or answer a call.
OFF/CLEAR
During a call, press to receive an
incoming call, if call waiting is activated.
During a call, press to hang up.
While using menus, press to cancel
an operation, back up to the previous
menu, or exit the menu display.
REDIAL/PAUSE
Press to view redial memory.
While entering numbers, press and hold
to insert a dialing pause.
MUTE/DELETE
While on a call, press to mute
microphone. While reviewing the call log,
press to delete an individual entry or
press and hold to clear the caller ID log.
While pre-dialing, press to delete digits
from a string.
SPEAKER
Press to activate handset speakerphone.
Press again to resume normal handset
use (earpiece).
INTERCOM
Press to initiate an intercom
conversation or transfer a call.
Feature menu
> shows highlighted item
Feature Menu
Directory
Call log
Ringer volume
Ringer tone
Key tone
>DIRECTORY
CALL LOG
Press ^ CID or DIRV to
scroll through menu items.
Press SELECT/MENU to select
or modify a highlighted item.
Press
OFF/CLEAR to cancel
an operation, back up to the
previous menu, or exit the
menu display.
Language
Clear voice mail
Dial type
Menu
1
Before you begin
This cordless telephone
operates within the
FLASH. Move closer to the
telephone base, then press
PHONE/FLASH to answer
the call.
maximum power
allowed by the Federal
Communications
If the handset is out
of range during a
Commission (FCC). Even so,
this handset and telephone
base can communicate
over only a certain distance
— which can vary with
the locations of the
telephone conversation,
there might be interference.
To improve reception, move
closer to the base.
If you move out of range
without pressing
telephone base and handset,
the weather, and the
construction of your home
or office.
OFF/CLEAR, your telephone
will be disconnected after
five seconds.To hang
If there is a call while
the handset is out of
range, the handset might
not ring — or if it does ring,
the call might not connect
up properly, walk back
toward the telephone base,
periodically pressing
OFF/CLEAR until the call is
disconnected.
when you press
PHONE/
Parts checklist
Remember to save your sales receipt and original packaging
in case it is necessary to ship your telephone for warranty
service. Check to make sure the telephone package includes the
following:
Handset
Power
adapter
CHARGING
Belt clip
Handset charger
Battery
Battery compartment
cover
2
Battery & charger installation
After installation, place the handset in the handset charger or the
telephone base and allow the battery to charge for at least 16 hours
before use. You can keep the battery charged by returning the
handset to the handset charger or the telephone base after each use.
When battery power is completely depleted, a full recharge takes
about 16 hours. The average talk time on a completely charged
battery is about eight hours depending on the environmental
conditions, and the standby time is approximately four days.
LOW BATTERY
Low battery indicator
Return handset to the handset
charger or the telephone base to
recharge when this symbol flashes.
(The handset will beep when battery
is low.)
Align the two holes in the
connector with the socket
pins according to the
diagram inside the battery
compartment, then snap
the connector into place.
Press tab and slide the
cover away from the center
of the telephone to open
battery compartment.
Replace the compartment
cover by sliding it towards
the center of the handset
until it is securely in place.
Place the battery
and wires in the
compartment.
Caution: Use only the supplied
rechargeable battery or AT&T
replacement battery model
27910 (SKU 00102. Part number
89-0099-00-00).
Plug the power cord into the jack on
the underside of the handset charger,
then plug the power adapter into an
electrical outlet not controlled by a
wall switch.
NOTE: Use only the power adapter
supplied with this product. If you need
a replacement, call 1 (800) 222-3111.
Be sure to use an electrical outlet not
controlled by a wall switch.
CHARGER light remains
on while battery is charging.
3
Adding new handsets
The handset provided with your E5640/E5655 is automatically
registered as Handset 1. Additional handsets will be assigned
numbers in the order they are registered (Handset 2, Handset 3,
or Handset 4). A maximum of 4 handsets can be registered to
the same telephone base.
The E5643B has 3 handsets automatically registered as handset
1, 2 and 3. You can register one additional handset, which will be
called Handset 4.
Before using a new E560-2/E560-5 handset, you
Enter base ID, then press SELECT.
must register it with the E5640/E5643B/E5655
telephone base. During registration, you must
ENTER BASE ID
enter the 15-digit ID number of the telephone
base. The base ID of the E5640/E5643B is
located on the bottom of the telephone base.
For the E5655, you can find the base ID code
in the E5655 base menu. Press SELECT/MENU
just below the screen on the telephone base,
HANDSET 2
then press ^ CID twice and the screen shows
>DISPLAY BASE ID. Press SELECT/MENU
and the base ID code will be displayed on the
screen.
NOTE: A maximum of two handsets or one handset and the
speakerphone on the telephone base can be connected to an
external line anytime.
4
Adding new handsets
To add a new handset:
• Make sure the handset battery is properly installed and fully
charged.
• If the battery in the handset is not sufficiently charged, the
screen on the handset will show
PLACE IN CHARGER
If this happens, return the handset to the handset charger until
the screen shows
ENTER BASE ID
• Enter the 15-digit base ID number. The number is located on
the bottom of the E5640 and E5643B telephone base. To find
the number on the E5655, press SELECT on the telephone
base, and scroll down to highlight DISPLAY BASE ID, then
press SELECT/MENU
.
• When the base ID is being entered, the following keys can be
used:
• DELETE to delete the last digit entered.
• Press and hold DELETE to delete all digits entered.
• Press SELECT when the complete base ID has been
entered.
5
Adding new handsets
• If the number is not entered correctly, the screen will be blank
for a few seconds and
ENTER BASE ID
will be displayed again until a valid base ID has been entered.
• After entering the code, press SELECT/MENU to accept the
code to complete the registration process.
NOTE: In some cases, the last digit of the base ID may be an *. Treat that as part of the base ID
and enter it into the handset for registration purpose.
NOTE: If an invalid base ID code is entered, there will be an error tone and the handset will
continue to display ENTER BASE ID. To make corrections while entering the code, erase digits by
pressing the DELETE/MENU key.
When a valid base ID has been entered and recognized by the
telephone base, the screen will be blank for a few seconds and
will show:
SEARCHING...
followed by a screen indicating the number for the newly
registered handset.
HANDSET X
The new handset will be assigned the next available handset
number (Handset 2, Handset 3, or Handset 4).A maximum of
four handsets can be registered to each telephone base.
6
Replacing a handset
If you are replacing a handset on a system which already has the
maximum number of handsets registered (4), or wish to change
the assigned handset number of your registered handsets, you
must first de-register all handsets, then re-register them again.
To de-register all handsets (E5640/E5643B/E5644B)
• Unplug the power supply from the telephone base.
• Plug in the power supply while pressing and holding the
HANDSET LOCATOR button on the telephone base.
• Continue pressing HANDSET LOCATOR until the IN USE and
CHARGING indicators are lit. This should take about 10
seconds.
• Release the HANDSET LOCATOR button.
All handsets will display:
ENTER BASE ID
Once the base indicators turn off (may take up to 30 seconds),
the handsets are de-registered from the telephone base, and can
now be re-registered (see page 9).
7
Replacing a handset
To de-register all handsets (E5655 ONLY)
• Press * 8 8 3 2 4 4 # on the dial pad of the
telephone base.
• Press SELECT/MENU on the telephone base.
All handsets will be de-registered from the telephone base and the
handsets will display (may take up to 30 seconds):
ENTER BASE ID
The handsets are now de-registered from the telephone base, and
can now be re-registered (see page 9).
8
Re-registering a handset
You can re-register handsets after de-registering them from
the telephone base.You can also re-register handsets to a new
telephone base if they have been replaced for any reason.
To re-register a handset:
• Make sure the handset battery is properly installed and
charged.
• The handset will display ENTER BASE ID.
• Enter the 15-digit base ID code located on the bottom of
the E5640, E5643B and E5644B telephone base. To find the
number on the E5655, press SELECT/MENU on the telephone
base and scroll down to highlight DISPLAY BASE ID, then
press SELECT/MENU
.
• After entering the base ID number, press SELECT/MENU to
complete the registration process.
NOTE: If an invalid base ID code is entered, you will hear an error tone and the
handset will continue to display ENTER BASE ID. To make corrections while entering
the code, you can erase digits by pressing the DELETE/MENU key.
Once a valid base ID code is entered and accepted by the
telephone base, the new handset will be assigned the next
available handset number (Handset 2, Handset 3, or Handset
4). A maximum of four handsets can be registered to each
telephone base.
9
Re-registering a handset
To re-register a handset to a new telephone base
• Make sure the handset battery is properly installed and
charged.
• Unplug the old telephone base. The handset will display
SEARCHING....
• Install the new telephone base by plugging it into an electrical
outlet and telephone jack.
• Press and hold the SELECT/MENU key until the handset displays
ENTER BASE ID.
• Enter the 15-digit base ID code located on the bottom of the
E5640, E5643B and E5644B telephone base.To find the number
on the E5655, go to the telephone base, press SELECT/MENU
on the telephone base and scroll down to highlight DISPLAY
BASE ID, then press SELECT/MENU
.
• After entering the code, press SELECT/MENU to accept the
code and complete registration.
NOTE: If an invalid base ID code is entered, you will hear an error tone and the
handset will continue to display ENTER BASE ID. To make corrections while entering
the code, erase digits by pressing the DELETE/MENU key.
Once a valid base ID code is entered and accepted by the
telephone base, the new handset will be assigned the next
available handset number (Handset 2, Handset 3, or Handset
4). A maximum of four handsets can be registered to each
telephone base.
10
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, use any industry standard
2.5 mm headset (purchased separately). For best results, use an
AT&T 2.5 mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap).
11
Troubleshooting
If you have difficulty with your telephone, please try the suggestions
below. For Customer Service, visit our web site at www.
telephones.att.com, or call 1 (800) 222-3111. In Canada, call 1
(866) 288-4268.
Problem
Suggestion
•
Make sure the battery is installed and charged
correctly. For optimum daily performance,
return the cordless handset to the telephone
base after use.
My telephone
does not work
at all
•
•
•
Make sure the power adapter is securely
plugged into an outlet not controlled by a wall
switch.
Make sure the telephone line cord is plugged
firmly into the telephone base and the modular
wall jack.
Unplug the unit's electrical power. Wait for
approximately 15 seconds, then plug it back
in. Allow up to one minute for the cordless
handset and telepone base to synchronize.
•
•
Remove and re-insert the battery of the
handset. If that still does not work, it may be
necessary to purchase a new battery.
Disconnect the telephone base from the
modular jack and plug in a working telephone.
If this telephone does not work, the problem is
probably in the wiring or the local service. Call
the local telephone company.
Low Battery is
displayed on
screen
•
•
Place the handset in the telephone base or
charger for recharging.
Remove and re-install the battery and use it
normally until fully discharged, then recharge
the handset on the telephone base or charger
for 16 hours.
•
If the above measures do not correct the
problem, the battery may need to be replaced.
12
Troubleshooting
Problem
Suggestion
•
•
•
•
Make sure the handset is placed in the charger
correctly. The CHARGING light on the telephone
base or charger should be on.
The battery
does not
charge in the
handset or
the handset
battery does
not accept
charge
If the cordless handset is in the charger or in the
telephone base but the CHARGING light is not on,
refer to The CHARGING light is off in this section.
It may be necessary to purchase a new battery.
Please refer to the batteries section of this user's
manual.
The telephone might be malfunctioning. Please
refer to the Limited warranty section of this user's
manual for further instruction.
•
Clean the charging contacts on the cordless
handset(s) and telephone base each month using a
pencil eraser or a dry non-abrasive fabric.
The CHARGING
light is off
•
•
Make sure the power adapter and telephone line
cords are plugged in correctly and securely.
Unplug the power adapter. Wait for 15 seconds
before plugging it back in. Allow up to one minute
for the cordless handset and telephone base to
synchronize.
•
The telephone might be malfunctioning. Please
refer to the Limited warranty section of this
user's manual for further instruction.
•
This is a signal that the battery is very low,
completely depleted, or when there is no electrical
contact between the battery and the telephone
base.
The CHARGING
light on the
telephone base
is flashing
•
Ensure the connector of the battery is securely
plugged into the handset and place the handset in
the telephone base for charging.
13
Troubleshooting
Problem
Suggestion
•
•
First, try all the above suggestions.
Move the cordless handset closer to the
telephone base. It might be out of range.
There is no dial
tone
•
•
The telephone line cord might be malfunctioning.
Try installing a new telephone line cord.
Disconnect the telephone base from the
telephone jack and connect a different telephone.
If there is no dial tone on this telephone either,
the problem is in the wiring or the local service.
Contact the local telephone company.
•
•
Make sure the ringer is on.
Make sure the telephone line cord and power
adapter are plugged in properly.
The telephone
does not ring
when there is an
incoming call
•
•
•
The cordless handset may be too far from the
telephone base. Move it closer to the telephone
base.
There may be too many extension telephones
on the telephone line to allow all of them to ring
simultaneously. Try unplugging some of them.
Other electronic products can cause interference
to your cordless telephone. Try installing your
telephone as far away as possible from the
following electronic devices: wireless routers,
radios, radio towers, pager towers, cellular
telephones, digital telephones, intercoms, room
monitors, televisions, VCRs, personal computers,
kitchen appliances, and other cordless
telephones.
•
Test a working telephone at the telephone jack.
If another telephone has the same problem, the
problem is in the telephone jack, the wiring, or
the local service. Contact your local telephone
company (charges may apply).
•
•
•
The telephone line cord might be malfunctioning.
Try installing a new telephone line cord.
Re-install the battery and place the cordless
handset in the telephone base.
Wait for the cordless handset to synchronize with
the telephone base. To be safe, allow up to one
minute for this to take place.
14
Troubleshooting
Problem
Suggestion
•
Make sure there is a dial tone before dialing.
It is normal if the cordless handset takes
a second or two to synchronize with the
telephone base before producing a dial tone.
Wait an extra second before dialing.
I cannot dial out
•
•
Make sure the telephone is set to the correct
dial mode (pulse dial or tone dial) for the
service in your area.
If the other telephones in your home are
having the same problem, the problem is in the
telephone jack, wiring or local service. Contact
the local telephone company (charges may
apply).
•
Eliminate any background noise. Noise from
a television, radio, or other appliances may
cause the telephone to not dial out properly.
If you cannot eliminate the background noise,
first try muting the cordless handset before
dialing, or dialing from another room in your
home with less background noise.
•
•
Disconnect the telephone base from the
telephone jack. Plug in a different telephone.
If you still hear other calls, the problem is
probably in the wiring or local service. Call
your local telephone company.
I hear other
calls when
using the
telephone.
Caller ID is a subscription service. You must
subscribe to this service from your local
telephone company for this feature to work
on your telephone.
My caller ID
features are
not working
properly
•
•
The caller may not be calling from an area
which supports caller ID.
Both you and the caller's telephone
companies must use equipment which are
compatible with caller ID service.
•
If you subscribe to DSL service, install a
noise filter to the telephone line between the
telephone base and the telephone line jack.
Contact your DSL service provider for filter
information.
15
Troubleshooting
Problem
Suggestion
•
•
The handset may be out of range. Move it closer
to the telephone base.
Appliances or other cordless telephones plugged
into the same circuit as the telephone base can
cause interference. Try moving the appliance or
telephone base to another outlet.
There is noise
or interference
during a
telephone
conversation
•
Other electronic products can cause interference
to your cordless telephone. Try installing your
telephone as far away as possible from the
following electronic devices: wireless routers,
radios, radio towers, pager towers, cellular
telephones, digital telephones, intercoms, room
monitors, televisions, VCRs, personal computers,
kitchen appliances, wireless routers, and other
cordless telephones.
•
•
Microwave ovens operate on the same frequency
as your telephone. It is normal to experience static
on your telephone while the microwave oven is
operating. Do not install this telephone in the
same outlet or near a microwave oven.
If your telephone is plugged in with a modem or
a surge protector, plug the telephone (or modem/
surge protector) into a different location. If this
solves the problem, re-locate your telephone or
modem farther apart from each other, or use a
different surge protector.
•
•
The layout of your home or office might be limiting
the operating range. Trying moving the telephone
base to another location, preferably a higher
location for better reception.
Disconnect the telephone base from the modular
jack and plug in a corded telephone. If calls are
still not clear, the problem is probably in the wiring
or local service. Contact the local telephone
company (charges may apply).
•
•
Select channels four through 10 for your router
(refer to the user's manual of your router for more
information).
If the other telephones in your home are having
the same problem, the problem is in the wiring
or local service. Contact the local telephone
company (charges may apply).
•
Do you have DSL service? If yes, you need to
have a DSL filter installed at every telephone jack
that has a telephone connected to it. Contact your
DSL service provider for filter information.
16
Troubleshooting
Problem
Suggestion
•
Make sure the telephone line cord is plugged in
securely.
I hear noise in
the cordless
handset, and
none of the keys
or buttons work
•
Make sure you subscribe to caller ID with call
waiting features services provided by the local
telephone company.
The system does
not receive caller
ID or the system
does not display
caller ID during
call waiting
•
•
The caller may not be calling from an area which
supports caller ID.
Both you and the caller's telephone companies
must use equipment which are compatible with
caller ID service.
•
If you subscribe to DSL service, install a noise
filter to the telephone line between the telephone
base and the telephone line jack. Contact your
DSL service provider for filter information.
•
•
Make sure the answering system is on.
The answering
system does not
answer after the
correct number
of rings
If Toll Saver is activated, the number of rings
changes to two when there are new messages
waiting.
•
•
If the memory is full or if the answering system is
off, the system will answer after ten rings.
In some cases, the answering system may be
affected by the ringing system used by the local
telephone company.
•
•
When recording the announcement, make sure
you speak in a normal tone of voice about nine
inches from the telephone base.
The
announcement
message is not
clear
Make sure there is no background noise
(television, music, traffic, etc.) when recording.
17
Troubleshooting
Problem
Suggestion
•
Make sure the answering system is turned on.
When the answering system is on, the red light
on the ANSWER ON/OFF key is lit.
The answering
system does not
record message
•
•
Make sure the Announcement only feature is off.
The memory is full. Delete some of the existing
messages from the system.
•
•
•
•
If a caller leaves a very long message, part of it
may be lost when the system disconnects the
call after four minutes.
The messages
on the
answering
system are
incomplete
If the caller pauses for more than seven
consecutive seconds, the system stops
recording and disconnects the call.
If the memory on the system becomes full during
a message, the system stops recording and
disconnects the call.
If the caller's voice is very soft, the system may
stop recording and disconnect the call.
The messages
on the system
are very difficult
to hear
•
Press ^ VOLUME on the side of the handset
or ^V VOLUME on the telephone base to
increase the speaker volume.
The answering
system does
not respond
to remote
•
•
Make sure your Remote access code is correct.
Make sure you are calling from a touch-tone
telephone. When dialing a number, you should
hear tones. If you hear clicks, then it is not a
touch-tone telephone and cannot activate the
answering system.
commands
•
•
The answering system may not detect the
Remote access code when your announcement
is playing. Wait until the announcement is over
before entering the code.
There may be interference on the telephone line
you are using. Press the dial pad keys firmly
when dialing.
18
Troubleshooting
Problem
Suggestion
Day of the week
is incorrect on
the answering
system after the
clock is reset
by the caller ID
function
•
Reset the year when setting the clock on the
answering system.
CL flashes in
•
•
Reset the clock on the answering system.
message window
Common cure
for electronic
equipment
If the unit is not responding normally, try
putting the cordless handset in the telephone
base or the charger. If it does not seem to
respond, try the following (in the order listed):
•
•
Disconnect the power to the telephone base.
Disconnect the battery on the cordless
handset and the spare battery in the telephone
base.
•
•
•
Wait a few minutes before connecting power
to the telephone base.
Re-install the battery and place the cordless
handset into the telephone base or charger.
Wait for the cordless handset to synchronize
its connection with the telephone base. Allow
up to one minute for this to take place.
19
Important safety information
This symbol alerts you to important operating or servicing instructions that may
appear in this user’s manual. Always follow basic safety precautions when using
this product to reduce the risk of injury, fire, or electric shock.
Safety information
• Read and understand all instructions in the user’s
manual. Observe all markings on the product.
Caution: To reduce the risk of fire or injury to persons
or damage to the telephone, read and follow these instruc-
tions carefully:
• Use only supplied rechargeable battery (model 102) or
AT&T replacement battery (model 103).
• Do not dispose of the battery in a fire; it could explode.
Check with local codes for special disposal instructions.
• Do not open or mutilate the battery. Released electro-
lyte is corrosive and may cause damage to the eyes or
skin. It may be toxic if swallowed.
• Exercise care in handling batteries in order not to create
a short circuit with conductive materials such as rings,
bracelets, and keys.The battery or conductor may over-
heat and cause harm.
• Charge the battery provided with or identified for use
with this product only in accordance with the instruc-
tions and limitations specified in this manual.
• Observe proper polarity orientation between the battery
and battery charger.
• Avoid using a telephone during a thunderstorm. There
may be a slight chance of electric shock from lightning.
20
Important safety information
• Do not use a telephone in the vicinity of a gas leak.
If you suspect a gas leak, report it immediately, but use a
telephone away from the area where gas is leaking. If this
product is a cordless model, make sure the telephone base is
also away from the area.
• Do not use this product near water, or when you are
wet. For example, do not use it in a wet basement or shower,
or next to a swimming pool, bathtub, kitchen sink, or laundry
tub. Do not use liquids or aerosol sprays for cleaning. If the
product comes in contact with any liquids, unplug any line or
power cord immediately. Do not plug the product back in until
it has dried thoroughly.
• Install this product in a protected location where no
one can trip over any line or power cords. Protect cords from
damage or abrasion.
• If this product does not operate normally, read
Troubleshooting on pages 12-19 of this user’s manual.
If you cannot solve the problem, or if the product is damaged,
refer to Limited warranty on pages 28-32. Do not open
this product except as may be directed in your user’s manual.
Opening the product or reassembling it incorrectly may expose
you to hazardous voltages or other risks.
• Replace batteries only as described in your user’s manual.
Do not burn or puncture batteries — they contain caustic
chemicals.
Caution: Use only the power adapter provided with this product. To obtain a
replacement, call 1 (800) 222–3111.
21
Important safety information
Especially about cordless telephones
• Privacy: The same features that make a cordless telephone
convenient create some limitations.Telephone calls are
transmitted between the telephone base and the handset
by radio waves, so there is a possibility that your cordless
telephone conversations could be intercepted by radio
receiving equipment within range of the cordless handset. For
this reason, you should not think of cordless telephone
conversations as being as private as those on corded
phones.
• Electrical power: The telephone base of this cordless
telephone must be connected to a working electrical outlet.The
electrical outlet should not be controlled by a wall switch.Calls
cannot be made from the handset if the telephone base
is unplugged or switched off, or if the electrical power is
interrupted.
• Potential TV interference: Some cordless telephones
operate at frequencies that may cause interference to TVs and
VCRs.To minimize or prevent such interference, do not place
the telephone base of the cordless telephone near or on top of
aTV orVCR. If interference is experienced, moving the cordless
telephone farther away from the TV or VCR will often reduce
or eliminate the interference.
• Rechargeable batteries:This product contains either nickel-
cadmium or nickel-metal hydride rechargeable batteries.Exercise
care in handling batteries in order not to create a short circuit
with conductive material such as rings, bracelets, and keys.The
battery or conductor may overheat and cause harm. Observe
proper polarity between the battery and the battery charger.
22
Important safety information
• Nickel-cadmium rechargeable batteries: Must be
recycled or disposed of properly. Do not dispose of them
in household garbage. Do not burn or puncture. Like other
batteries of this type, if burned or punctured, they could
release caustic material which could cause injury.
™
The RBRC Seal means that the manufacturer is voluntarily participating in
an industry program to collect and recycle nickel-cadmium rechargeable
batteries when taken out of service within the United States. These batteries
may be taken to a participating local retailer of replacement batteries or recycling center. Or
you may call 1-800-8-BATTERY for locations accepting spent nickel-cadmium batteries.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless telephones):
Wireless Technology Research, LLC (WTR), an independent
research entity,led a multidisciplinary evaluation of the interference
between portable wireless telephones and implanted cardiac
pacemakers. Supported by the U.S. Food and Drug Administration,
WTR recommends to physicians that:
PACEMAKER PATIENTS
• Should keep cordless telephones at least six inches from the
pacemaker.
• Should NOT place cordless telephones directly over the
pacemaker, such as in a breast pocket, when it is turned ON.
• Should use the cordless telephone on the ear opposite the
pacemaker.
23
Important safety information
WTR’s evaluation did not identify any risk to bystanders with
pacemakers from other persons using cordless telephones.
Especially about telephone answering systems
Two-way recording: This unit does not emit warning beeps to let
the other party know that the call is being recorded. To ensure
that you are in compliance with any federal or state regulations
regarding recording a telephone call,you should start the recording
process and then inform the other party that you are recording
the conversation.
SAVETHESE INSTRUCTIONS
24
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with
technical requirements adopted by the Administrative Council for
Terminal Attachments (ACTA). The label on the back or bottom
of this equipment contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX.This identifier must
be provided to your local telephone company upon request.
The plug and jack used to connect this equipment to premises
wiring and the telephone network must comply with the applicable
Part 68 rules and technical requirements adopted by ACTA. A
compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular
jack that is also compliant. An RJ11 jack should normally be used
for connecting to a single line and an RJ14 jack for two lines. See
Installation Instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to determine the
number of devices you may connect to your telephone line and
still have them ring when there are incoming calls. The REN for
this product is encoded as the 6th and 7th characters following
the US: in the product identifier (e.g., if ## is 03, the REN is 0.3).
In most, but not all areas, the sum of all RENs should be five (5.0)
or less. For more information, please contact your local telephone
company.
This equipment may not be used with party lines. If you have
specially wired alarm dialing equipment connected to your
telephone line, ensure the connection of this equipment does not
disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or
a qualified installer.
25
FCC Part 68 and ACTA
If this equipment is malfunctioning, it must be unplugged from the
modular jack until the problem has been corrected. Repairs to this
telephone equipment can only be made by the manufacturer or its
authorized agents. For repair procedures, follow the instructions
outlined under the limited warranty.
If this equipment is causing harm to the telephone network, the
telephone company may temporarily discontinue your telephone
service. The telephone company is required to notify you before
interrupting service. If advance notice is not practical, you will be
notified as soon as possible.You will be given the opportunity to
correct the problem and the telephone company is required to
inform you of your right to file a complaint with the FCC.Your
telephone company may make changes in its facilities, equipment,
operation, or procedures that could affect the proper functioning
of this product. The telephone company is required to notify you
if such changes are planned.
If this product is equipped with a corded or cordless handset, it
is hearing aid compatible.
If this product has memory dialing locations, you may choose to
store emergency telephone numbers (e.g., police, fire, medical)
in these locations. If you do store or test emergency numbers,
please:
• Remain on the line and briefly explain the reason for the call
before hanging up.
• Perform such activities in off-peak hours, such as early morning
or late evening.
26
FCC Part 15
This equipment has been tested and found to comply with
the requirements for a Class B digital device under Part 15 of
the Federal Communications Commission (FCC) rules. These
requirements are intended to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
To ensure safety of users, the FCC has established criteria for the
amount of radio frequency energy that can be safely absorbed by a
user or bystander according to the intended usage of the product.
This product has been tested and found to comply with the FCC
criteria.The handset may be safely held against the ear of the user.
The telephone base shall be installed and used such that parts of
the user’s body other than the hands are maintained at a distance
of approximately 20 cm (8 inches) or more. If you choose to use
a clipping device, please make sure to only use the supplied AT&T
belt clip.
27
Limited warranty
The AT&T brands are used under license.Any repair, replacement
or warranty service, and all questions about this product should
be directed to:Advanced American Telephones, 1(800) 222-3111
1. What does this limited warranty cover?
The manufacturer of this AT&T-branded product, Advanced
AmericanTelephones (“AAT”), warrants to the holder of a valid
proof of purchase (“CONSUMER” or “YOU”) that the product
and all accessories provided by AAT in the sales package
(“PRODUCT”) are free from material defects in material and
workmanship, pursuant to the following terms and conditions,
when installed and used normally and in accordance with
operation instructions. This limited warranty extends only to
the Consumer for Products purchased and used in the United
States of America.
2. What will AAT do if the Product is not free
from material defects in materials and workmanship during
the limited warranty period (“MATERIALLY DEFECTIVE
PRODUCT”)?
During the limited warranty period, AAT’s authorized service
representative will repair or replace, at AAT’s option, without
charge, a Materially Defective Product. If AAT repairs this
product,AAT may use new or refurbished replacement parts. If
AAT chooses to replace this product,AAT may replace it with a
new or refurbished product of the same or similar design.AAT
will return repaired or replacement products to you in working
condition.
AAT will retain defective parts, modules, or equipment. Repair
or replacement of Product, at AAT’s option, is your exclusive
remedy.You should expect the repair or replacement to take
approximately 30 days.
28
Limited warranty
3. How long is the limited warranty period?
The limited warranty period for the Product extends for ONE
(1)YEAR from the date of purchase.
If AAT repairs or replaces a Materially Defective Product under
the terms of this limited warranty, this limited warranty also
applies to repaired or replacement Products for a period of
either (a) 90 days from the date the repaired or replacement
Product is shipped to you or (b) the time remaining on the
original one-year limited warranty, whichever is longer.
4. What is not covered by this limited warranty?
This limited warranty does not cover:
• Product that has been subjected to misuse, accident, shipping
or other physical damage, improper installation, abnormal
operation or handling, neglect, inundation, fire, water, or
other liquid intrusion; or
• Product that has been damaged due to repair, alteration, or
modification by anyone other than an authorized service
representative of AAT; or
• Product to the extent that the problem experienced is
caused by signal conditions, network reliability or cable or
antenna systems; or
• Product to the extent that the problem is caused by use with
non-AAT accessories; or
• Product whose warranty/quality stickers, product serial
number plates or electronic serial numbers have been
removed, altered or rendered illegible; or
29
Limited warranty
• Product purchased, used, serviced, or shipped for repair
from outside the United States, or used for commercial or
institutional purposes (including but not limited to Products
used for rental purposes); or
• Product returned without valid proof of purchase (see 6
below); or
• charges for installation or setup, adjustment of customer
controls, and installation or repair of systems outside the
unit.
5. How do you get warranty service?
To obtain warranty service in the United States of America, call
1 (800) 222-3111 for instructions regarding where to return
the Product. Before calling for service, please check the user’s
manual.A check of the Product controls and features may save
you a service call.
Except as provided by applicable law, you assume the risk
of loss or damage during transit and transportation and are
responsible for delivery or handling charges incurred in the
transport of Product(s) to the service location.AAT will return
repaired or replaced Product under this limited warranty to
you, transportation, delivery or handling charges prepaid. AAT
assumes no risk for damage or loss of the Product in transit.
If the Product failure is not covered by this limited warranty,
or proof of purchase does not meet the terms of this limited
warranty, AAT will notify you and will request that you
authorize the cost of repair prior to any further repair activity.
You must pay for the cost of repair and return shipping costs
for the repair of Products that are not covered by this limited
warranty.
30
Limited warranty
6. What must you return with the Product to get warranty
service?
You must:
a return the entire original package and contents including the
Product to the AAT service location along with a descrip-
tion of the malfunction or difficulty;
b include “valid proof of purchase” (sales receipt) identifying
the Product purchased (Product model) and the date of
purchase or receipt (keep a copy for your records); and
c provide your name, complete and correct mailing address,
and telephone number.
7. Other limitations
This warranty is the complete and exclusive agreement
between you and AAT. It supersedes all other written or oral
communications related to this Product.AAT provides no
other warranties for this product.The warranty exclusively
describes all of AAT’s responsibilities regarding the product.
There are no other express warranties. No one is authorized
to make modifications to this limited warranty and you should
not rely on any such modification.
State Law Rights: This warranty gives you specific legal rights,
and you may also have other rights which vary from state to
state.
Limitations:
Implied warranties, including those of fitness for a particular
purpose and merchantability (an unwritten warranty that the
product is fit for ordinary use) are limited to one year from
date of purchase.
31
Limited warranty
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
In no event shall AAT be liable for any indirect, special, inci-
dental, consequential, or similar damages (including, but not
limited to lost profits or revenue, inability to use the product,
or other associated equipment, the cost of substitute equip-
ment, and claims by third parties) resulting from the use of this
product.
Some states do not allow the exclusion or limitation of inci-
dental or consequential damages, so the above limitation or
exclusion may not apply to you.
Please retain your receipt as your proof of purchase.
32
Copyright © 2006 Advanced American Telephones. All rights reserved.
AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American
Telephones. Printed in China. Issue 3 AT&T 06/06.
91-000891-010-000
|