ASW Global LLC Computer Hardware 3300565 User Manual
User’s Manual  
3300565  
3300565 User’s Manual  
Packing List  
Please check the package before you starting setup the system  
Hardware:  
3300565 series motherboard x 1  
Cable Kit:  
Serial ATA Ribbon Cable x 2  
PS2 Cable x 1  
44-pin ATA33 IDE Cable x 1  
26-pin Slim Type Floppy Cable x 1  
Power Cable x 1  
COM Port & Printer Port Cable x 1  
40-pin ATA100 IDE Cable x 1  
COM Port Cable x 1  
Audio Port Cable x 1  
USB Cable x 1  
Printed Matters:  
User’s Manual x 1  
Driver CD x 1  
3
3300565 User’s Manual  
Index  
Chapter 1 <Introduction>.....................................................................................7  
1.1 <Product Overview>................................................................................. 7  
1.2 <Product Specification> ........................................................................... 8  
1.3 <Mechanical Drawing>....................................................................... …10  
1.4 <Block Diagram>....................................................................................11  
Chapter 2 Hardware Setup ……………………………………………….……..12  
2.1 <Connector Location> ......................................................................……12  
2.2 <Jumper Reference>………………………………………………………..14  
2.3 <Connector Reference>......................................................................... 15  
2.3.1 <Internal Connector>.................................................................. 15  
2.3.2 <External Connector>.................................................................15  
2.4 <CPU and Memory Setup>.................................................................... 16  
2.4.1< CPU>........................................................................................ 16  
2.4.2 <Memory> .................................................................................. 16  
2.5 <CMOS ATX Setup>.............................................................................. 17  
2.6 <Enhanced IDE & CF Interface>............................................................ 18  
2.7 <Serial ATA Interface>........................................................................... 19  
2.8 <Floppy Port>......................................................................................... 20  
2.9 <LAN Interface>..................................................................................... 21  
2.10 <Onboard Display Interface>……………………………………………...22  
2.10.1 <Analog VGA Interface>………….……………………………….22  
2.10.2 < Digital Display >…………………………………………...23  
2.11 <Onboard Audio Interface>……………………………………….………27  
2.12 <USB2.0 Interface>.............................................................................. 28  
2.13 <GPIO Interface>................................................................................. 30  
2.14 <Serial Port Jumper Setting>............................................................... 31  
2.15 <Power and Fan Connector>……………………………………………..33  
4
3300565 User’s Manual  
2.15.1 <Power Input>.......................................................................... 33  
2.15.2 <Power Output!«………………………………………………….34  
2.15.3 <Fan Connector>......................................................................34  
2.16 <Indicator and Switch>......................................................................... 35  
Chapter 3 <System Configuration>................................................................... 37  
3.1 <SATA RAID Configuration>.................................................................. 37  
3.2 <Audio Configuration> ........................................................................... 39  
3.3 <Display Configuration>......................................................................... 40  
Chapter 4 <BIOS Setup> .................................................................................... 44  
Appendix A <I/O Port Pin Assignment> ........................................................... 46  
A.1 <IDE Port> ............................................................................................. 46  
A.2 <Floppy Port> ........................................................................................ 48  
A.3 <IrDA Port>............................................................................................ 48  
A.4 < CRT Port >.......................................................................................... 49  
A.5 <Serial ATA Port>.................................................................................. 49  
A.6 <Serial Port>.......................................................................................... 49  
A.7 <LAN Port>............................................................................................ 50  
Appendix B <Flash BIOS>.................................................................................. 52  
B.1BIOS Auto Flash Tool............................................................................. 52  
B.2Flash Method.......................................................................................... 52  
Contact Information............................................................................................ 54  
5
3300565 User’s Manual  
(The Page is Left For Blank)  
6
3300565 User’s Manual  
Introduction  
Chapter 1 <Introduction>  
1.1 <Product Overview>  
3300565 is the 5.25 inch embedded miniboard based on VIA chipset. It integrates VIA  
embedded chipset for CN700 with VT8237R Plus, DDR 333/400 SDRAM, and serial ATA  
with RAID to provide the economical embedded platform.  
VIA CN700 & VT8237R Plus Chipset  
The board comes with the VIA embedded chipset of CN700, supports DDR 333/400  
SDRAM, integrated the S3 Graphics UniChrome Pro IGP graphics core, hardware MPEG-2  
acceleration.  
The VT8237R Plus provides the board to support Ultra V-Link (533MB/s) with CN700, two  
serial ATA ports with RAID array function, 6 x USB2.0 ports and 5.1 channel AC97 audio.  
Multimedia solution  
Based on VIA CN700 chipset, the board provides 18/24-bit LVDS interface, which supports  
dual independent display with CRT.  
Onboard AC97 codec provides the high quality of sound including 5.1-channel stereo  
DACs.  
Four LAN Interface  
3300565 also comes with four Giga LAN interface, support boot-on-LAN and wake-on-LAN  
function.  
High Speed Hot-plug Interface  
Based on VIA VT8237R Plus the board provides 6 USB2.0 interfaces with up to 480Mbps of  
transferring rate.  
Expanded UCR for remote Operating SETUP Bios Feature  
Expanded Universal Console Redirection (UCR) is a feature for monitoring POST  
messages and running Setup and an operation system from a remote serial terminal.  
Product Overview  
7
3300565 User’s Manual  
Introduction  
1.2 <Product Specification>  
General Specification  
Form Factor  
CPU  
5.25 inch miniboard  
VIA V4/Eden 1.0GHz processor  
L1/L2 Cache: 128/128KB  
Front side bus: 400MHz  
Memory  
1 x 184-pin DDR 333/400 SDRAM up to 1GB,onboard optional  
256MB DDR SDRAM  
Unbufferred, none-ECC memory supported only  
VIA CN700 and VT8237R Plus  
Chipset  
BIOS  
Green Function  
Phoenix-Award v6.00PG 4Mb PnP flash BIOS  
Power saving mode includes doze, standby and suspend modes.  
ACPI version 1.0 and APM version 1.2 compliant  
Watchdog Timer  
System reset programmable watchdog timer with 1 ~ 255  
sec./min. of timeout value  
Real Time Clock  
Enhanced IDE  
VIA VT8237R Plus built-in RTC with lithium battery  
Enhanced IDE interface supports dual channels and up to 4  
ATAPI devices at Ultra DMA133  
One 40-pin and one 44-pin IDE port onboard  
One Compact Flash Type II socket on solder side  
VIA VT8237R Plus integrates 2 Serial ATA interface  
RAID 0, 1 array Technology supported  
Serial ATA  
Multi-I/O Port  
Chipset  
VIA VT8237R Plus with Winbond W83697UG controller  
One external & three internal RS-232 serial ports  
Four external & four internal Hi-Speed USB 2.0 ports with  
480Mbps of transfer rate  
Serial Port  
USB Port  
Parallel Port  
Floppy Port  
IrDA Port  
One 26-pin internal parallel port  
One slim type Floppy port  
One IrDA compliant Infrared interface supports SIR  
Internal PS/2 keyboard and mouse  
One 12-pin Digital I/O connector with 8-bit programmable I/O  
interface  
K/B & Mouse  
GPIO  
Hardware Monitor  
Fan speed, CPU temperature and voltage monitoring  
VGA Display Interface  
Chipset  
VIA CN700 built-in S3 Graphics UniChrome Pro IGP graphics core  
200MHz  
BIOS selectable 16/32/64MB shard with system memory  
CRT, LCD monitor with analog display  
External DB15 female connector on rear I/O panel  
Internal 40-Pin LVDS connector  
Core Frequency  
Memory  
Display Type  
Connector  
8
Product Specification  
3300565 User’s Manual  
Ethernet Interface  
Introduction  
Chipset  
Type  
REALTEK 8110S-32  
10Base-T / 100Base-TX /1000Base-TX  
auto-switching Fast Ethernet  
Full duplex, IEEE802.3U compliant  
Connector  
Four External RJ45 connectors with LED on rear I/O panel  
Audio Interface  
Chipset  
REALTEK ALC655  
Interface  
Connector  
5.1 channel surround audio with Line-in, Line-out and MIC-in  
Onboard audio connector with pin header  
Onboard CD-IN connector  
Expansive Interface  
PCI  
1 x PCI slot supports up to two PCI devices through riser card  
1 x Mini PCI socket  
Mini PCI  
Power and Environment  
Power  
DC 12V input with external DC Jack or onboard 4-pin connector  
Requirement  
Dimension  
146 (L) x 203 (H) mm  
Storage within -20 ~ 85 o  
o
P
P
P
Software support  
Windows 2000, Windows XP,Windows CE 4.0 or later, Windows XP  
Embedded Linux (Fedora Core 1, Mandrake 9.2 and Red Hat 9.0)  
Operation  
System  
Ordering Code  
3300565A  
VIA V4 Eden 1G With Onboard VGA, AUDIO, Giga LAN, USB2.0,  
4 x COM, FDD, LPT, GPIO, LVDS, Mini PCI, SATA  
The same as above and with 256MB DDR SDRAM  
AC-DC Adapter with 12V, 80W DC Jack output  
3300565B  
3107615  
1. The specifications may be different as the actual production.  
For further product information please visit the website at  
U
TU  
Product Specification  
9
3300565 User’s Manual  
Introduction  
1.3 <Mechanical Drawing>  
10  
Mechanical Drawing  
3300565 User’s Manual  
Introduction  
1.4 <Block Diagram>  
Eden nanoBGA2  
CRT/LCD Monitor  
VT1636 LVDS  
1 x 184-pin  
DDR333/400  
Up to 1GB  
CN700  
Ultra V-Link  
533MB/s  
6 x USB2.0 Ports  
AC97 ALC655  
2 x SATA  
2 x IDE  
VT8237R+  
BIOS  
LAN1/2/3/4  
4 x 8110S-32  
4 x Serial ports  
PCI  
1 x Floppy port  
1 x Parallel port  
8-bit GPIO  
W83782G  
Hardware Monitor  
PS/2 , KB/MS  
IrDA  
Block Diagram  
11  
3300565 User’s Manual  
Hardware Setup  
Chapter 2 <Hardware Setup>  
2.1 <Connector Location>  
CN_PWR  
CN_USB2/3  
JLED0/1/2/3  
IDE1  
CN_INV  
SYSFAN  
JFRNT IDE2  
DIMM  
FDD  
SATA1/2  
PCI  
CN_DIO  
MINIPCI  
CN_IR  
CPUFAN  
LPT  
CN_AUDIO  
CN_LVDS  
CN_CRT  
CN_12V  
CN_COM2/3/4  
CN_PS2  
CDIN  
12  
Connector Location  
3300565 User’s Manual  
Hardware Setup  
CF  
DC_IN  
LAN1/2/3/4  
COM1  
USB  
CRT  
Connector Location  
13  
3300565 User’s Manual  
Hardware Setup  
2.2 <Jumper Reference>  
Jumper  
JRTC  
Function  
CMOS Operating/Clear Setting  
Compact Flash address mode setting  
LCD Panel Voltage Setting  
AT/ATX mode setting  
JCFSEL  
JVLCD  
JAT  
JCSEL1/2  
COM2 RS232/422/485 mode setting  
JCFSEL  
JAT  
JRTC  
JVLCD  
JCSEL1/2  
14  
Jumper Reference  
3300565 User’s Manual  
Hardware Setup  
2.3 <Connector Reference>  
2.3.1 <Internal Connector>  
Connector  
DIMM  
Function  
Remark  
Standard  
Standard  
Slim  
184-pin DDR SDRAM DIMM  
40-pin primary IDE connector  
44-pin secondary IDE connector  
26-pin slim type floppy connector  
7-pin Serial ATA connector  
IDE1  
IDE2  
FDD  
Slim  
SATA1/2  
CN_12V  
CN_AUDIO  
CDIN  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Standard  
Slim  
4-pin power supply connector  
5 x 2-pin audio connector  
4-pin CD-ROM audio input connector  
6 x 2-pin digital I/O connector  
5 x 2-pin USB connector  
CN_DIO  
CN_USB 2/3  
CPUFAN  
SYSFAN  
3-pin CPU cooler fan connector  
3-pin system cooler fan connector  
CN_COM2/3/4 5 x 2-pin RS232 serial port  
CN_IR  
5-pin IrDA connector  
CF  
Compact Flash Type II socket  
20 x 2-pin LVDS LCD interface  
5-pin LCD inverter connector  
3 x 2-pin LED connector  
4-pin power output connector  
Slim 32bit PCI slot  
CN_LVDS  
CN_INV  
JLED0/1/2/3  
CN_PWR  
PCI  
MINIPCI  
LPT  
Mini-PCI socket  
Standard  
Standard  
Standard  
Standard  
13 x 2-pin printer connector  
5 x 2-pin PS2 connector  
14-pin switch/indicator connector  
CN_PS2  
JFRNT  
2.3.2 <External Connector>  
Connector  
Function  
Remark  
Standard  
Standard  
Standard  
Standard  
Standard  
CRT  
DB15 VGA connector  
Dual USB 2.0 connector  
USB  
COM1  
RJ45_1/2/3/4  
DC_IN  
DB9 Serial port connector  
Four RJ45 LAN connector  
DC 12V input jack  
Connector Reference  
15  
3300565 User’s Manual  
Hardware Setup  
2.4 <CPU and Memory Setup>  
2.4.1< CPU>  
The board supports VIA Eden processor, default ratio is Eden 1G (400MHz) with heatsink  
only.  
2.4.2 <Memory>  
The board supports one 184-pin DDR333/400 SDRAM and up to 1GB of capacity, only  
non-ECC, unbuffered memory is supported.  
DIMM  
104-pin  
80-pin  
Please check the pin number to match the socket side well  
before installing memory module.  
16  
CPU and Memory Setup  
3300565 User’s Manual  
Hardware Setup  
2.5 <CMOS ATX Setup>  
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to  
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its  
default values.  
Jumper: JRTC  
Type: Onboard 3-pin jumper  
JRTC  
1-2  
Mode  
Clear CMOS  
Normal Operation  
2-3  
Default setting  
Jumper: JAT  
Type: Onboard 3-pin jumper  
JAT  
1-2  
Mode  
AT mode  
2-3  
ATX mode -default  
Default setting  
1
3
JRTC  
JAT  
3
1
CMOS ATX Setup  
17  
3300565 User’s Manual  
Hardware Setup  
2.6 <Enhanced IDE & CF Interface>  
The board supports two enhanced IDE interface, dual channel for 4 ATAPI devices with  
ATA33. Based on embedded application, the board has one 44-pin IDE connector +5V  
supported for disk on module.  
The board also provides a Compact Flash Type II socket with jumper (JCFSEL) selectable  
slave/Master mode on secondary IDE channel.  
Jumper: JCFSEL  
Type: onboard 3-pin header  
JCFSEL  
1-2  
Mode  
Master  
Slave  
2-3  
Default setting  
3
1
JCFSEL  
18  
Enhanced IDE&CF Interface  
3300565 User’s Manual  
Hardware Setup  
2.7 <Serial ATA Interface>  
Based on VIA VT8237R Plus Southbridge, the board supports two Serial ATA interfaces  
with RAID 0 and 1 array function. The following is the list of the specification of the Serial  
ATA.  
1. Complies with Serial ATA Specification Revision 1.0  
2. Dual Channel master mode PCI  
3. On-chip two-channel Serial ATA (S-ATA) PHY for support of up to two S-ATA devices  
directly.  
4. S-ATA drive transfer rate is capable of up to 150 MB/s per channel (serial speed of 1.5  
Gbit/s).  
For more information please visit VIA website (www.globalamericaninc.com)  
SATA1  
SATA2  
Serial ATA Interface  
19  
3300565 User’s Manual  
Hardware Setup  
2.8 <Floppy Port>  
The board provides a slim type floppy port; please use the 26-pin ribbon cable in the  
package to connect the floppy device.  
FDD  
Floppy rear side  
4. Lift up this plastic bar  
5. Slot the cable in (Blue paste for outside)  
6. Press back the plastic bar  
1. Lift up the brown plastic bar  
2. Slot the cable in (Blue paste for  
brown bar side)  
3. Press back the plastic bar  
20  
Floppy Port  
3300565 User’s Manual  
Hardware Setup  
2.9 <LAN Interface>  
The board provides four GigaLAN interfaces with REALTEK 8110S-32 PCI controller, and  
compliant with standard IEEE 802.3 Ethernet interface for 100BASE-TX.  
LAN_1/2/3/4  
LAN Interface  
21  
3300565 User’s Manual  
Hardware Setup  
2.10 <Onboard Display Interface>  
Based on VIA CN700, the board supports integrated S3 Graphics UniChrome Pro IGP  
graphics, with BIOS selectable 16/32/64MB shared with system memory for frame buffer.  
2.10.1 <Analog VGA Interface>  
The board provides a DB15 CRT connector on the rear I/O panel.  
CRT  
22  
Onboard Display Interface  
3300565 User’s Manual  
Hardware Setup  
2.10.2 <Digital Display>  
The board provides one 40-pin LVDS connector for 18/24-bit single/dual channel panels,  
supports up to 1600 x 1200 (UXGA) of resolution, with one LCD backlight inverter connector  
and one jumper for panel voltage setting  
5
1
CN_INV  
1
3
JVLCD  
JVLCD  
CN_LVDS  
2
1
40  
39  
Digital Display  
23  
3300565 User’s Manual  
Hardware Setup  
Connector: CN_INV  
Type: 5-pin LVDS Power Header  
Connector model: JST B5B-XH-A  
Connector: JVLCD  
Type: 3-pin Power select Header  
Pin  
1
Description  
+12V  
Pin  
1
Description  
VCC(5V)  
2
GND  
2
LCDVCC  
3
GND  
3
VCC3(3.3)  
4
GND  
5
ENABKL  
Connector: CN_LVDS  
Type: onboard 40-pin connector for LVDS connector  
Connector model: HIROSE DF13-40DP-1.25V  
Pin  
2
Signal  
LCDVCC  
GND  
Pin  
1
Signal  
LCDVCC  
GND  
4
3
6
ATX0-  
ATX0+  
GND  
5
BTX0-  
BTX0+  
GND  
8
7
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
9
ATX1-  
ATX1+  
GND  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
BTX1-  
BTX1+  
GND  
ATX2-  
ATX2+  
GND  
BTX2-  
BTX2+  
GND  
ACLK-  
ACLK+  
GND  
BTX3-  
BTX3+  
GND  
ATX3-  
ATX3+  
GND  
BCLK-  
BCLK+  
GND  
N/C  
N/C  
N/C  
N/C  
N/C  
N/C  
24  
Digital Display  
3300565 User’s Manual  
Hardware Setup  
To setup the LCD, you need the component below:  
1. A panel with LVDS interfaces.  
2. An inverter for panel’s backlight power.  
3. A LCD cable and an inverter cable.  
For the cables, please follow the pin assignment of the connector to make a cable, because  
every panel has its own pin assignment, so we do not provide a standard cable; please find a  
local cable manufacture to make cables.  
LCD Installation Guide:  
1. Preparing the 3300565, LCD panel and the backlight inverter.  
2. Please check the datasheet of the panel to see the voltage of the panel, and set the  
jumper JVLCD to +5V or +3.3V.  
3. You would need a LVDS type cable.  
Panel side  
Board side  
For sample illustrator only  
4. To connect all of the devices well.  
Digital Display  
25  
3300565 User’s Manual  
Hardware Setup  
After setup the devices well, you need to select the LCD panel type in the BIOS.  
The panel type mapping is list below:  
3300565 BIOS panel type selection form  
VGA ROM VERSION: 9Y-9X-00-20  
NO.  
0
Resolution  
640 x 480  
Color  
18  
18  
18  
18  
24  
18  
18  
18  
18  
18  
24  
24  
24  
24  
24  
24  
Channel  
1
1
1
1
1
2
2
1
2
2
1
2
1
2
2
2
1
800 x 600  
2
1024 x 768  
1280 x 768  
1280 x 1024  
1400 x 1050  
1600 x 1200  
1280 x 800  
640 x 480  
3
4
5
6
7
8
9
1024 x 768  
1024 x 768  
1024 x 768  
1280 x 768  
1280 x 1024  
1400 x 1050  
1600 x 1200  
A
B
C
D
E
F
26  
Digital Display  
3300565 User’s Manual  
Hardware Setup  
2.11 <Onboard Audio Interface>  
The board provides the onboard AC97 5.1-channel audio interface with Realteck ALC655.  
Connector: CN_AUDIO  
Type: 10-pin (2 x 5) header (pitch = 2.54mm)  
Pin  
1
3
Description  
Line/SURR – Left  
Line/SURR – Right  
MIC2/LEF  
Pin  
2
4
Description  
Ground  
MIC1/CEN  
Ground  
5
6
7
9
N/C  
8
10  
Line Out– Left  
Ground  
Line Out – Right  
Connector: CDIN  
Type: 4-pin header (pitch = 2.54mm)  
Pin  
1
Description  
CD – Left  
Ground  
2
3
Ground  
4
CD – Right  
CDIN  
CDIN  
CN_AUDIO  
1
14  
10  
Onboard Audio Interface  
27  
3300565 User’s Manual  
Hardware Setup  
2.12 <USB2.0 Interface>  
Based on VIA VT8237R Plus, the board provides 6 USB2.0 ports. The USB2.0 interface  
provides up to 480Mbps of transferring rate.  
Interface  
Controller  
USB2.0  
VIA VT8237R+  
Up to 480Mb/s  
500mA  
Transfer Rate  
Output Voltage  
1
CN_USB  
10  
USB  
28  
USB2.0 Interface  
3300565 User’s Manual  
Hardware Setup  
Connector: CN_USB  
Type: 10-pin (5 x 2) header for USB2/3 Ports  
Pin  
1
Description  
VCC  
Pin  
2
Description  
VCC  
3
Data0-  
4
Data1-  
Data1+  
Ground  
N/C  
5
Data0+  
Ground  
Ground  
6
7
8
9
10  
PS: The USB2.0 will be only active when you connecting with the USB2.0 devices, if you  
insert an USB1.1 device, the port will be changed to USB1.1 protocol automatically. The  
transferring rate of USB2.0 as 480Mbps is depending on device capacity, exact transferring  
rate may not be up to 480Mbps.  
USB2.0 Interface  
29  
3300565 User’s Manual  
Hardware Setup  
2.13 <GPIO Interface>  
The board provides a programmable 8-bit digital I/O interface; you can use this general  
purpose I/O port for system control like POS or KIOSK.  
Connector: CN_DIO  
Type: onboard 2 x 6-pin header, pitch=2.0mm  
Pin  
1
3
Description  
Ground  
GP0  
Pin  
2
4
Description  
Ground  
GP4  
5
GP1  
6
GP5  
7
GP2  
8
GP6  
9
11  
GP3  
VCC  
10  
12  
GP7  
+12V  
CN_DIO  
1
2
12  
11  
30  
GPIO Interface  
3300565 User’s Manual  
Hardware Setup  
2.14 <Serial Port Jumper Setting >  
The board provides four RS232 serial ports, with jumper selectable RS422/485 for COM2.  
Connector: CN_COM2/3/4  
Type: 10-pin (5 x 2) header for COM2/3/4  
Pin  
1
Description  
DCD/422RX-/485-  
TXD/422TX+  
GND  
Pin  
2
Description  
RXD/422RX+/485+  
DTR/422TX-  
DSR  
3
4
5
6
7
RTS  
8
CTS  
9
RI  
10  
N/C  
JCSEL JCSEL  
1
2
1
2
6
RS-232  
RS-485  
5
12  
11  
RS-422  
Power and Fan Connector  
31  
3300565 User’s Manual  
Hardware Setup  
JCSEL2  
JCSEL1  
1
CN_COM2/3/4  
10  
COM  
32  
GPIO Interface  
3300565 User’s Manual  
Hardware Setup  
2.15 <Power and Fan Connector>  
The board comes with a 2-pin DC-Jack power connector for DC 12V input, it also has one  
4-pin P4 additional use power connector for internal power supply, you can choose one pf  
them to meet your pplication.  
2.15.1 <Power Input>  
Connector:CN_12V  
Type: 4-pin DC power connector  
Pin  
1
Description  
+12V  
Pin  
2
Description  
+12V  
3
Ground  
4
Ground  
1
4
13  
SYSFAN  
CN_PWR  
1
3
CPUFAN  
CN_12V  
1
3
2
4
Power and Fan Connector  
33  
3300565 User’s Manual  
Hardware Setup  
2.15.2 <Power Output>  
Connector: CN_PWR  
Type: 4-pin P-type connector for +5V/+12V output  
Pin Description Pin Description Pin Description Pin Description  
+5V Ground Ground +12V  
Note: Maximum output voltage: 12V/5A & 5V/3A  
1
2
3
4
Floppy  
ATAPI Drives  
Relative Accessory  
2.15.3 <Fan Connector>  
Connector: CPUFAN, SYSFAN  
Type: 3-pin fan wafer connector  
Pin Description  
Ground  
Pin  
Description  
Pin  
Description  
1
2
+12V  
3
Fan Control  
34  
Power Output  
3300565 User’s Manual  
Hardware Setup  
2.16 <Indicator and Switch>  
The JFRNT provides front control panel of the board, such as power button, reset and  
beeper, etc. Please check well before you connecting the cables on the chassis.  
Connector: JFRNT  
Type: onboard 14-pin (2 x 7) 2.54-pitch header  
Function  
IDE LED  
Signal  
PIN  
Signal  
Function  
HDLED+  
HDLED-  
1
3
2
4
PWRLED+  
N/C  
Power  
LED  
Reset+  
Reset-  
5
7
6
PWRLED-  
SPK+  
N/C  
Reset  
8
N/C  
9
10  
12  
14  
Speaker  
PWRBT+  
PWRBT-  
11  
13  
N/C  
Power  
Button  
SPK-  
1
JFRNT  
14  
Indicator and Switch  
35  
3300565 User’s Manual  
(This Page is Left For Blank)  
36  
3300565 User’s Manual  
System Configuration  
Chapter 3 <System Configuration>  
3.1 <SATA RAID Configuration>  
The board supports two Serial ATA ports onboard, and supports RAID 0, 1 and JBOD disk  
array, the RAID 0, 1 and JBOD are specified below:  
RAID 0 (Stripping): Two hard drives operating as one drive for optimized data R/W  
performance. It needs two unused drives to build this operation.  
RAID 1 (Mirroring): Copies the data from first drive to second drive for data security, and if  
one drive fails, the system would access the applications to the workable drive. It needs two  
unused drives or one used and one unused drive to build this operation. The second drive  
must be the same or lager size than first one.  
JBOD (Span): As different as RAID 0, the JBOD combines two disks as one without any  
fault tolerance and I/O performance enhancement.  
To build Serial ATA disk array, please press <TAB> while booting up the system before  
entering OS, and follow the instructions to edit the RAID function.  
(Selectable Functions)  
(Option Instruction)  
(Disk Statement)  
SATA RAID Configuration  
37  
3300565 User’s Manual  
You also can edit disk array under OS, please install the VIA RAID Utility in the driver CD.  
(To getting start, please click here to learn more information)  
(Click here to build RAID 0)  
(Click here to build RAID JBOD)  
(Click here to build RAID 0)  
38  
SATA RAID Configuration  
3300565 User’s Manual  
System Configuration  
3.2 <Audio Configuration>  
The board provides 5.1 channel audio interface with driver installed, please install the  
Realtek ALC655 audio driver in the CD before getting start to enjoy the 5.1 channel sound  
system.  
Audio Configuration  
39  
3300565 User’s Manual  
3.3 <Display Configuration>  
The board provides onboard analog VGA interface, and optional digital display interface  
with LVDS , please install the VIA video driver before enjoy the vivid display.  
Based on the VIA CN700 with S3 UniChrome Pro graphic, the board provides dual  
display function for clone or extended desktop modes with secondary display device  
attached.  
After installing video driver, please launch the desktop display properties.  
For secondary display device, you have two options selectable.  
or more display properties setting, please click “Advanced” button.  
Please select S3Display for advanced device setting.  
When you set dual display clone mode, you’ll see the same screen display on two  
devices.  
When you set the dual display for extended desktop mode, you can have the independent  
desktop on the second device.  
40  
Display Configuration  
3300565 User’s Manual  
System Configuration  
Two controllers for each display device  
There are two options for secondary display device  
For more display properties setting, please click “Advanced” button.  
Display Configuration  
41  
3300565 User’s Manual  
Please select S3Display for advanced device setting.  
Connected Devices  
Click check box to  
enable/disable device  
Specified display setup if available  
When you set dual display clone mode, you’ll see the same screen display on two devices.  
When you set the dual display for extended desktop mode, you can have the independent  
desktop on the second device.  
42  
Display Configuration  
3300565 User’s Manual  
(This Page is Left for Blank)  
43  
3300565 User’s Manual  
BIOS Setup  
Chapter 4 <BIOS Setup>  
The motherboard uses the Award BIOS for the system configuration. The Award  
BIOS in the single board computer is a customized version of the industrial standard  
BIOS for IBM PC AT-compatible computers. It supports Intel x86 and compatible CPU  
architecture based processors and computers. The BIOS provides critical low-level  
support for the system central processing, memory and I/O sub-systems.  
The BIOS setup program of the single board computer let the customers modify the  
basic configuration setting. The settings are stored in a dedicated battery-backed  
memory, NVRAM, retains the information when the power is turned off. If the battery  
runs out of the power, then the settings of BIOS will come back to the default setting.  
The BIOS section of the manual is subject to change without notice and is provided here  
for reference purpose only. The settings and configurations of the BIOS are current at  
the time of print, and therefore they may not be exactly the same as that displayed on  
your screen.  
To activate CMOS Setup program, press  
DEL key immediately after you turn on the  
system. The following message “Press DEL to enter SETUP” should appear in the  
lower left hand corner of your screen. When you enter the CMOS Setup Utility, the Main  
Menu will be displayed as Figure 4-1. You can use arrow keys to select your function,  
press  
Enter key to accept the selection and enter the sub-menu.  
Figure 4-1 CMOS Setup Utility Main Screen  
44  
3300565 User’s Manual  
(This Page is Left for Blank)  
45  
3300565 User’s Manual  
I/O Port Pin Assignment  
Appendix A <I/O Port Pin Assignment>  
39  
1
2
A.1 <IDE Port>  
Connector: IDE1  
Type: 40-pin (20 x 2) box header  
40  
Pin  
1
Description  
Pin  
2
Description  
Reset  
Ground  
D8  
3
D7  
4
5
D6  
6
D9  
7
D5  
8
D10  
9
D4  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
D11  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
D3  
D12  
D2  
D13  
D1  
D14  
D0  
D15  
Ground  
VCC  
REQ  
Ground  
Ground  
Ground  
IDESEL  
Ground  
N/C  
IOW-/STOP  
IOR-/HDMARDY  
IORDY/DDMARDY  
DACK-  
IRQ  
A1  
CBLID  
A2  
A0  
CS0 (MASTER CS)  
LED ACT-  
CS1 (SLAVE CS)  
Ground  
46  
IDE Port  
3300565 User’s Manual  
I/O Port Pin Assignment  
1
Connector: IDE2  
43  
44  
Type: 44-pin (22 x 2) box header  
2
Pin  
1
Description  
Pin  
2
Description  
Reset  
Ground  
D8  
3
D7  
4
5
D6  
6
D9  
7
D5  
8
D10  
9
D4  
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
42  
44  
D11  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
41  
43  
D3  
D12  
D2  
D13  
D1  
D14  
D0  
D15  
Ground  
N/C  
REQ  
Ground  
Ground  
Ground  
Ground  
Ground  
N/C  
IOW-/STOP  
IOR-/HDMARDY  
IORDY/DDMARDY  
DACK-  
IRQ  
A1  
SD  
A0  
A2  
CS1  
ASP1  
Vcc  
CS3  
Ground  
Vcc  
Ground  
Ground  
IDE Port  
47  
3300565 User’s Manual  
I/O Port Pin Assignment  
A.2 <Floppy Port>  
Connector: FDD  
Type: 26-pin connector  
Pin  
1
Description  
Pin  
2
Description  
INDEX  
DRV0  
VCC  
3
VCC  
4
5
VCC  
6
DSKCHG  
N/C  
7
DRV1  
MTR1  
RPM  
8
9
10  
12  
14  
16  
18  
20  
22  
24  
26  
MTR0  
11  
13  
15  
17  
19  
21  
23  
25  
DIR  
N/C  
STEP  
Ground  
Ground  
N/C  
WRITE DATA  
WRITE GATE  
TRACK 0  
WRPTR  
N/C  
Ground  
Ground  
RDATA-  
SEL  
A.3 <IrDA Port>  
Connector: CN_IR  
Type: 5-pin header for SIR Port  
5
1
Pin  
1
Description  
Vcc  
2
N/C  
3
IRRX  
4
Ground  
IRTX  
5
48  
Floppy Port  
3300565 User’s Manual  
I/O Port Pin Assignment  
6
11  
12  
13  
A.4 < CRT Port >  
1
2
3
4
5
14  
15  
Connector: CRT  
10  
Type: 15-pin D-sub female connector on panel  
Description  
RED  
Pin  
6
Description  
Ground  
Pin  
11  
12  
13  
14  
15  
Description  
N/C  
1
2
3
4
5
GREEN  
BLUE  
7
Ground  
5VCDA  
HSYNC  
VSYNC  
5VCLK  
8
Ground  
N/C  
9
LVGA5V  
Ground  
Ground  
10  
A.5 <Serial ATA Port>  
Connector: CN_SATA1/2  
1
7
Type: 7-pin wafer connector  
1
2
3
4
5
6
7
GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND  
1
A.6 <Serial Port>  
6
2
3
4
7
8
9
Connector: COM1  
5
Type: 9-pin D-sub male connector on rear panel  
Pin  
Description  
Pin  
Description  
DSR  
1
DCD  
6
2
SIN  
7
RTS  
3
SO  
8
CTS  
4
DTR  
9
RI  
5
Ground  
CRT Port  
49  
3300565 User’s Manual  
A.7 <LAN Port>  
1
8
Connector: RJ45_1/2/3/4  
Type: RJ45 connector with LED on rear panel  
Pin  
1
2
3
4
5
6
7
8
Description TX+  
TX- RX+ N/C  
N/C  
RX-  
N/C  
N/C  
Connector: JLED0/1/2/3  
Type: 6-pin header for LAN LED  
1
6
Pin  
1
Description  
ACT+  
Pin  
2
Description  
ACT-  
3
Link100+  
Link 1G+  
4
Link100-  
Link 1G-  
5
6
50  
3300565 User’s Manual  
(This Page is Left for Blank)  
51  
3300565 User’s Manual  
Flash BIOS  
Appendix B <Flash BIOS>  
B.1 BIOS Auto Flash Tool  
The board is based on Award BIOS and can be updated easily by the BIOS auto flash  
tool. You can download the tool online at the address below:  
U
File name of the tool is “awdflash.exe”, it’s the utility that can write the data into the  
BIOS flash ship and update the BIOS.  
B.2 Flash Method  
1. Please make a bootable floppy disk.  
2. Get the last .bin files you want to update and copy it into the disk.  
3. Copy awardflash.exe to the disk.  
4. Power on the system and flash the BIOS. (Example: C:/ awardflash XXX.bin)  
5. Re-star the system.  
Any question about the BIOS re-flash please contact your distributors or visit the  
web-site at below:  
http://www.globalamericaninc.com  
52  
BIOS Auto Flash Tool  
3300565 User’s Manual  
(This Page is Left for Blank)  
53  
3300565 User’s Manual  
Con tact Information  
Contact Information  
Any advice or comments about our products and service, or  
anything we can help you with please don’t hesitate to contact with us.  
We will do our best to support you for your products, projects and  
business  
Global American Inc.  
Address:  
17 Hampshire Drive  
Hudson, NH 03051  
TEL:  
Toll Free (U.S. Only) 800-833-8999  
(603)886-3900  
FAX:  
(603)886-4545  
Website:  
E-Mail:  
http://www.globalamericaninc.com  
salesinfo@globalamericaninc.com  
54  
Contact Information  

HP Hewlett Packard D8896 User Manual
Hanns G Computer Monitor HZ231 User Manual
GE MFL38211602 User Manual
GE JGP975 User Manual
GE Edge 25932EE1 User Manual
Emerson ET1333D User Manual
Dacor Cooktop DECT365 User Manual
Antec Sonata II 500 User Manual
AMCC 9550SX 2 User Manual
321 Studios LG Software Innovations Computer Monitor W2043T User Manual