ASRock Computer Hardware 1333 D667 User Manual

Wolfdale1333-D667

User Manual

Version 2.3

Published May 2008

Contents

1 Introduction ................................................... 5

1.1 Package Contents .......................................................... 5

1.2 Specifications ................................................................. 6

1.3 Minimum Hardware Requirement Table for Windows^®

Vista^TMPremium 2007 and Basic Logo ........................ 9

1.4 Motherboard Layout ........................................................ 10

1.5 ASRock 6CH I/O............................................................. 11

2 Installation..................................................... 12

2.1 Screw Holes ................................................................... 12

2.2 Pre-installation Precautions ............................................ 12

2.3 CPU Installation .............................................................. 13

2.4 Installation of Heatsink and CPU fan ............................... 15

2.5 Installation of Memory Modules (DIMM) ......................... 16

2.6 Expansion Slots (PCI and PCI Express Slots) ..................... 17

2.7 Jumpers Setup ............................................................... 18

2.8 Onboard Headers and Connectors .................................. 19

2.9 SATAII Hard Disk Setup Guide ........................................ 23

2.10 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks

Installation...................................................................... 24

2.11 Driver Installation Guide .............................................. 24

2.12 Untied Overclocking Technology .................................... 24

3 BIOS SETUP UTILITY.......................................... 25

3.1 Introduction ..................................................................... 25

3.1.1 BIOS Menu Bar..................................................... 25

3.1.2 Navigation Keys .................................................... 26

3.2 Main Screen ................................................................... 26

3.3 Advanced Screen ............................................................ 26

3.3.1 CPU Configuration ................................................ 27

3.3.2 Chipset Configuration ............................................ 29

3.3.3 ACPI Configuration ................................................ 32

3.3.4 IDE Configuration .................................................. 33

3.3.5 PCIPnP Configuration ........................................... 35

3.3.6 Floppy Configuration ............................................. 36

3.3.7 Super IO Configuration .......................................... 36

3.3.8 USB Configuration ................................................ 37

3.4 Hardware Health Event Monitoring Screen...................... 38

3.5 Boot Screen ................................................................... 39

3.5.1 Boot Settings Configuration ................................... 39

3.6 Security Screen.............................................................. 40

3.7 Exit Screen .................................................................... 41

4 Software Support .......................................... 42

4.1 Install Operating System ................................................ 42

4.2 Support CD Information ................................................... 42

4.2.1 Running Support CD ............................................. 42

4.2.2 Drivers Menu ......................................................... 42

4.2.3 Utilities Menu ........................................................ 42

4.2.4 Contact Information ............................................... 42

Chapter 1 Introduction

Thank you for purchasing ASRock Wolfdale1333-D667 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control. It delivers

excellent performance with robust design conforming to ASRock’s commitment to qual-

ity and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-

step guide to the hardware installation. Chapter 3 and 4 contain the configuration

guide to BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might be

updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock Wolfdale1333-D667 Motherboard

(Micro ATX Form Factor: 9.6-in x 8.7-in, 24.4 cm x 22.1 cm)

ASRock Wolfdale1333-D667 Quick Installation Guide

ASRock Wolfdale1333-D667 Support CD

One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable

One Ribbon Cable for a 3.5-in Floppy Drive

One Serial ATA (SATA) Data Cable (Optional)

One Serial ATA (SATA) HDD Power Cable (Optional)

One ASRock 6CH I/O Shield

1.2

Platform

CPU

- Micro ATX Form Factor: 9.6-in x 8.7-in, 24.4 cm x 22.1 cm

- LGA 775 for Intel^®Dual Core Core^TM2 Extreme / Core^TM2 Duo

/ Pentium^®Dual Core / Celeron^®, supportingDual Core Wolfdale

processors

- Compatible with all FSB1333/1066/800/533MHz CPUs

except Quad Core (see CAUTION 1)

- Supports Hyper-Threading Technology (see CAUTION 2)

- Supports Untied Overclocking Technology (see CAUTION 3)

- Supports EM64T CPU

Chipset

Memory

- Northbridge: Intel^®945GCA2

- Southbridge: Intel^®ICH7

- Dual Channel DDR2 Memory Technology (see CAUTION 4)

- 2 x DDR2 DIMM slots

- SupportDDR2 667/533 (see CAUTION 5)

- Max. capacity: 4GB (see CAUTION 6)

- CPU Frequency Stepless Control (see CAUTION 7)

- ASRock U-COP (see CAUTION 8)

- Boot Failure Guard (B.F.G.)

Hybrid Booster

Expansion Slot

Graphics

- 1 x PCI Express x16 slot

- 1 x PCI Express x1 slot

- 2 x PCI slots

- Intel^®Graphics Media Accelerator 950

- Pixel Shader 2.0, DirectX 9.0

- Max. shared memory 224MB (see CAUTION 9)

- 5.1 CH Windows^®Vista^TMPremium Level HDAudio

(Realtek ALC662 Audio Codec)

Audio

LAN

- Realtek PCIE x1 LAN 8101E/8102E

- Speed: 10/100 Ethernet

- Supports Wake-On-LAN

Rear Panel I/O

ASRock 6CH I/O

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x Serial Port: COM1

- 1 x VGA Port

- 1 x Parallel Port (ECP/EPP Support)

- 4 x Ready-to-Use USB 2.0 Ports

- 1 x RJ-45 LAN Port

- HDAudio Jack: Line in / Front Speaker / Microphone

Connector

- 4 x SATAII 3.0 Gb/s connectors (No Support for RAID and “Hot

Plug” functions) (see CAUTION 10)

- 1 x ATA100 IDE connector (supports 2 x IDE devices)

- 1 x Floppy connector

- 1 x DeskExpress Hot Plug Detection header

- CPU/Chassis FAN connector

- 24 pinATX power connector

- 4 pin 12V power connector

- CD in header

- Front panel audio connector

- 2 x USB 2.0 headers (support 3 USB 2.0 ports)

(see CAUTION 11)

- 1 x WiFi header (see CAUTION 12)

- 4Mb AMI BIOS

BIOS Feature

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- AMBIOS 2.3.1 Support

Support CD

Hardware

Monitor

- Drivers, Utilities, AntiVirus Software (Trial Version)

- CPU Temperature Sensing

- Chassis Temperature Sensing

- CPU Fan Tachometer

- Chassis Fan Tachometer

- CPU Quiet Fan

- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

- Microsoft^®Windows^®2000 / XP / XP 64-bit / Vista^TM

Vista^TM64-bit compliant

Certifications

WARNING

- FCC, CE, WHQL

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, applying Untied Overclocking Technology, or using the third-

party overclocking tools. Overclocking may affect your system stability, or even

cause damage to the components and devices of your system. It should be done at

your own risk and expense. We are not responsible for possible damage caused by

overclocking.

CAUTION!

1. FSB1333-CPU will operate in overclocking mode. Under this situation,

PCIE frequency will also be overclocked to 115MHz.

2. About the setting of “Hyper Threading Technology”, please check page

28.

3. This motherboard supports Untied Overclocking Technology. Please read

“Untied Overclocking Technology” on page 24 for details.

4. This motherboard supports Dual Channel Memory Technology. Before you

implement Dual Channel Memory Technology, make sure to read the

installation guide of memory modules on page 16 for proper installation.

5. Please check the table below for the CPU FSB frequency and its corre-

sponding memory support frequency.

CPU FSB Frequency

Memory Support Frequency

DDR2 533*, DDR2 667

1333

1066

800

DDR2 533, DDR2 667

DDR2 400, DDR2 533, DDR2 667

DDR2 400, DDR2 533

533

* When you use a FSB1333-CPU on this motherboard, it will run at

DDR2 500 if you adopt a DDR2 533 memory module.

6. Due to the chipset limitation, the actual memory size may be less than

4GB for the reservation for system usage under Windows^®XP, Windows^®

XP 64-bit, Windows^®Vista^TMand Windows^®Vista^TM64-bit.

7. Although this motherboard offers stepless control, it is not recom-

mended to perform over-clocking. Frequencies other than the recom-

mended CPU bus frequencies may cause the instability of the system

or damage the CPU.

8. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC

system.

9. The maximum shared memory size is defined by the chipset vendor

and is subject to change. Please check Intel^®website for the latest

information.

10. Before installing SATAII hard disk to SATAII connector, please read the “SATAII

Hard Disk Setup Guide” on page 23 to adjust your SATAII hard disk drive to

SATAII mode. You can also connect SATA hard disk to SATAII connector

directly.

11. Power Management for USB 2.0 works fine under Microsoft^®Windows^®

Vista^TM64-bit / Vista^TM/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.

12. WiFi header supports WiFi+AP function with ASRock WiFi-802.11g /

WiFi-802.11n module, an easy-to-use wireless local area network

(WLAN) adapter. It allows you to create a wireless environment and

enjoy the convenience of wireless network connectivity. Please visit our

website for the availability of ASRock WiFi-802.11g / WiFi-802.11n

module.

ASRock website http://www.asrock.com

1.3 Minimum Hardware Requirement Table for Windows^®

Vista^TMPremium 2007 and Basic Logo

For system integrators and users who purchase this motherboard and

plan to submit Windows^®Vista^TMPremium 2007 and Basic logo, please

follow below table for minimum hardware requirements.

CPU

Celeron D 326

Memory

512MB x 2 Dual Channel (Premium)

512MB Single Channel (Basic)

256MB x 2 Dual Channel (Basic)

DX9.0 with WDDM Driver

VGA

* If you plan to use onboard VGA to submit Windows^®Vista^TMlogo, please keep the

default setting of “DVMT Mode Select” option under BIOS.

* If you plan to use external graphics card on this motherboard, please refer to

Premium Discrete requirement at http://www.asrock.com

* After June 1, 2007, all Windows^®Vista^TMsystems are required to meet above

minimum hardware requirements in order to qualify for Windows^®Vista^TM

Premium 2007 logo.

1.4 Motherboard Layout

22.1cm (8.7 in)

PS2_USB_PWR1

ATX12V1

USB 2.0

T: USB2

B: USB3

USB 2.0

T: USB0

B: USB1

CPU_FAN1

Top:

RJ-45

Super

Intel

945GC A2

Chipset

IR1

ATXPWR1

IDE1

PCIE1

CMOS

Battery

PCI

LAN

PHY

CLRCMOS1

EXPRESS

PCIE2

Intel

ICH7

CD1

PCI1

4Mb

BIOS

SATAII_3

RoHS

SATAII_4

HD_AUDIO1

SATAII_1

SATAII

PCI2

USB6

PANEL 1

PLED PWRBTN

CHA_FAN1

AUDIO

CODEC

SATAII_2

USB4_5

SPEAKER1

WIFI

HDLED RESET

FLOPPY1

19 18 17 16

15 14

PS2_USB_PWR1 Jumper

ATX 12V Connector (ATX12V1)

Secondary SATAII Connector

(SATAII_2; Red)

DeskExpress Hot Plug Detection Header

(IR1)

BIOS SPI Chip

Chassis Speaker Header (SPEAKER 1)

Chassis Fan Connector (CHA_FAN1)

USB 2.0 Header (USB4_5, Blue)

USB 2.0 Header (USB6, Blue)

Floppy Connector (FLOPPY1)

WiFi Header (WIFI)

CPU Fan Connector (CPU_FAN1)

775-Pin CPU Socket

North Bridge Controller

2 x 240-pin DDR2 DIMM Slots

(Dual Channel: DDRII_1, DDRII_2; Yellow)

IDE1 Connector (IDE1, Blue)

Clear CMOS Jumper (CLRCMOS1)

South Bridge Controller

PCI Slots (PCI1- 2)

Front Panel Audio Header (HD_AUDIO1)

AInternal Audio Connector: CD1 (Black)

PCI Express x1 Slot (PCIE2)

PCI Express x16 Slot (PCIE1)

ATX Power Connector (ATXPWR1)

Primary SATAII Connector (SATAII_1; Red)

Third SATAII Connector (SATAII_3; Orange) 27

Fourth SATAII Connector (SATAII_4; Orange) 28

System Panel Header (PANEL1)

1.5 ASRock 6CH I/O

PS/2 Mouse Port (Green)

Parallel Port

Microphone (Pink)

USB 2.0 Ports (USB01)

VGA Port

USB 2.0 Ports (USB23)

RJ-45 Port

10 COM Port

Line In (Light Blue)

Line Out (Lime)

11 PS/2 Keyboard Port (Purple)

* To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows^®XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox”

, click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker

and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then

reboot your system.

For Windows^®Vista^TM

After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio

streams simultaneously”, and click “ok”. Then reboot your system.

Chapter 2 Installation

Wolfdale1333-D667 is a Micro ATX form factor (9.6" x 8.7", 24.4 x 22.1 cm)

motherboard. Before you install the motherboard, study the configuration of your

chassis to ensure that the motherboard fits into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so may cause physical injuries to you and

damages to motherboard components.

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the

chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity, NEVER

place your motherboard directly on the carpet or the like. Also remember to use

a grounded wrist strap or touch a safety grounded object before you handle

components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or

in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard, peripherals,

and/or components.

2.3 CPU Installation

For the installation of Intel 775-LAND CPU,

please follow the steps below.

775-Pin Socket Overview

Before you insert the 775-LAND CPU into the socket, please check if

the CPU surface is unclean or if there is any bent pin on the socket.

Do not force to insert the CPU into the socket if above situation is

found. Otherwise, the CPU will be seriously damaged.

CPU Marked Corner

Step 1. Open the socket:

Step 1-1. Disengaging the lever by depressing

Lift Lever Up to 90°

down and out on the ^Sh^oo^cko^etk^Mat^ro^kedc^Cle^ora^ner^r

retention tab.

Step 1-2. Rotate the load lever to fully open po-

sition at approximately 135 degrees.

Step 1-3. Rotate the load plate to fully open po-

sition at approximately 100 degrees.

Step 2. Insert the 775-LAND CPU:

Step 2-1. Hold the CPU by the edges where are

marked with black lines.

Step 2-2. Orient the CPU with IHS (Integrated

Heat Sink) up. Locate Pin1 and the two

orientation key notches.

Pin1

alignment key

orientation

key notch

orientation

key notch

775-PinSocket

775-LAND CPU

For proper inserting, please ensure to match the two orientation key

notches of the CPU with the two alignment keys of the socket.

Step 2-3. Carefully place the CPU into the socket

by using a purely vertical motion.

Step 2-4. Verify that the CPU is within the socket

and properly mated to the orient keys.

Step 3. Remove PnP Cap (Pick and Place Cap):

Use your left hand index finger and thumb to

support the load plate edge, engage PnP cap

with right hand thumb and peel the cap from the

socket while pressing on center of PnP cap to

assist in removal.

1. It is recommended to use the cap tab to handle and avoid kicking

off the PnP cap.

2. This cap must be placed if returning the motherboard for after

service.

Step 4. Close the socket:

Step 4-1. Rotate the load plate onto the IHS.

Step 4-2. While pressing down lightly on load

plate, engage the load lever.

Step 4-3. Secure load lever with load plate tab

under retention tab of load lever.

2.4

This motherboard is equipped with 775-Pin socket that supports Intel 775-LAND CPU.

Please adopt the type of heatsink and cooling fan compliant with Intel 775-LAND CPU

to dissipate heat. Before you installed the heatsink, you need to spray thermal

interface material between the CPU and the heatsink to improve heat dissipation.

Ensure that the CPU and the heatsink are securely fastened and in good contact with

each other. Then connect the CPU fan to the CPU_FAN connector (CPU_FAN1, see

page 10, No. 4).

For proper installation, please kindly refer to the instruction manuals of

your CPU fan and heatsink.

Below is an example to illustrate the installation of the heatsink for 775-LAND CPU.

Step 1. Apply thermal interface material onto center

of IHS on the socket surface.

Step 2. Place the heatsink onto the socket. Ensure

fan cables are oriented on side closest to the

CPU fan connector on the motherboard

(CPU_FAN1, see page 10, No. 4).

Step 3. Align fasteners with the motherboard

throughholes.

Step 4. Rotate the fastener clockwise, then press

down on fastener caps with thumb to install

and lock. Repeat with remaining fasteners.

If you press down the fasteners without rotating them clockwise,

the heatsink cannot be secured on the motherboard.

Step 5. Connect fan header with the CPU fan

connector on the motherboard.

Step 6. Secure excess cable with tie-wrap to ensure

cable does not interfere with fan operation or

contact other components.

2.5 Installation of Memor

(

)

Wolfdale1333-D667 motherboard provides two 240-pin DDR2 (DoubleData Rate 2)

DIMM slots, and supports Dual Channel Memory Technology. For dual channel

configuration, you always need to install two identical (the same brand, speed, size

and chip-type) memory modules in the DDR2 DIMM slots to activate Dual Channel

Memory Technology. Otherwise, it will operate at single channel mode.

1. It is not allowed to install a DDR memory module into DDR2 slot;

otherwise, this motherboard and DIMM may be damaged.

2. If you install only one memory module or two non-identical memory

modules, it is unable to activate the Dual Channel Memory Technology.

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

notch

break

notch

break

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the

slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

2.6 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 2 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

PCIE slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane

width graphics cards.

PCIE2 (PCIE x1 slot) is used for PCI Express cards with x1 lane

width cards, such as Gigabit LAN card, SATA2 card, etc.

If you install the add-on PCI Express VGA card to PCIE1 (PCIE x16 slot),

the onboard VGA will be disabled. If you install the add-on PCI Express

VGA card to PCIE1 (PCIE x16 slot) and adjust the “Internal Graphics

Mode Select” BIOS option to [Enabled], the onboard VGA will be enabled,

and the primary screen will be onboard VGA.

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 3. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 4. Fasten the card to the chassis with screws.

2.7 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap

is placed on pins, the jumper is “Open”. The

illustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when jumper cap is

placed on these 2 pins.

Jumper

Setting

Description

PS2_USB_PWR1

(see p.10 No. 1)

Short pin2, pin3 to enable

+5VSB (standby) for PS/2

or USB wake up events.

1_2

2_3

+5V

+5VSB

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

Clear CMOS

(CLRCMOS1, 2-pin jumper)

2-pin jumper

(see p.10 No. 9)

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes

system setup information such as system password, date, time, and system

setup parameters. To clear and reset the system parameters to default setup,

please turn off the computer and unplug the power cord from the power

supply. After waiting for 15 seconds, use a jumper cap to short 2 pins on

CLRCMOS1 for 5 seconds.

2.8 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

FDD connector

(33-pin FLOPPY1)

FLOPPY1

Pin1

(see p.10 No. 21)

the red-striped side to Pin1

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the

connector.

Primary IDE connector (Blue)

(39-pin IDE1, see p.10 No. 8)

IDE1

PIN1

connect the black end

to the IDE devices

connect the blue end

to the motherboard

80-conductor ATA 66/100 cable

Note: Please refer to the instruction of your IDE device vendor for the details.

Serial ATAII Connectors

(SATAII_1: see p.10, No. 11)

(SATAII_2: see p.10, No. 15)

(SATAII_3: see p.10, No. 12)

(SATAII_4: see p.10, No. 13)

These Serial ATAII (SATAII)

connectors support SATAII

or SATA hard disk for internal

storage devices. The current

SATAII interface allows up to

3.0 Gb/s data transfer rate.

SATAII_3

SATAII_4

SATAII_1

SATAII_2

Serial ATA (SATA)

Data Cable

Either end of the SATA data cable

can be connected to the SATA /

SATAII hard disk or the SATAII

connector on the motherboard.

(Optional)

Serial ATA (SATA)

Power Cable

(Optional)

Please connect the black end of

SATA power cable to the power

connector on each drive. Then

connect the white end of SATA

power cable to the power

connect to the SATA HDD

powerconnector

connect to the

powersupply

connector of the power supply.

USB_PWR

USB 2.0 Headers

(9-pin USB4_5)

Besides four default USB 2.0

ports on the I/O panel, there are

two USB 2.0 headers on this

motherboard. USB4_5headercan

support two USB 2.0 ports, and

USB6 header can support one

USB 2.0 port.

P-4

P+4

GND

DUMMY

(see p.10 No. 19)

GND

P+5

P-5

USB_PWR

(4-pin USB6)

(see p.10 No. 20)

GND

P+6

P-6

USB_PWR

WiFi Header

(11-pin WIFI)

This header supports WiFi+AP

function with ASRock

USB+5V_2

GND1

+3SVB

(see p.10 No. 22)

WiFi-802.11g / WiFi-802.11n

module, an easy-to-use wireless

local area network (WLAN)

adapter. It allows you to create a

wirelessenvironmentandenjoythe

convenience of wireless network

connectivity.

PME#

GND1

D0+

D0-

USB+5V_1

If you don’t plan to use WiFi+AP functin on this motherboard, this header can be

used as a 4-Pin USB 2.0 header to support one USB 2.0 port. To connect the

4-Pin USB device cable to this header, please refer to this

picture for proper installation.

DeskExpress Hot Plug Detection

This header supports the Hot

Plug detection function for

ASRock DeskExpress.

IRTX

+5VSB

Hotplug#

Header

(5-pin IR1)

GND

IRRX

(see p.10 No. 3)

InternalAudio Connector

(4-pin CD1)

This connector allows you

to receive stereo audio input

from sound sources such as

a CD-ROM, DVD-ROM, TV

tuner card, or MPEG card.

CD1

(CD1: see p.10 No. 25)

Front PanelAudio Header

(9-pin HD_AUDIO1)

This is an interface for front

panel audio cable that allows

convenient connection and

control of audio devices.

GND

PRESENCE#

MIC_RET

OUT_RET

(see p.10 No. 24)

OUT2_L

J_SENSE

OUT2_R

MIC2_R

MIC2_L

1. High Definition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select

Chipset Configuration. Set the Front Panel Control option from

[Auto] to [Enabled].

F. Enter Windows system. Click the icon on the lower right hand

taskbar to enter Realtek HD Audio Manager.

For Windows^®2000 / XP / XP 64-bit OS:

Click “Audio I/O”, select “Connector Settings”

, choose

“Disable front panel jack detection”, and save the change by

clicking “OK”.

For Windows^®Vista^TM/ Vista^TM64-bit OS:

Click the right-top “Folder” icon

, choose “Disable front

panel jack detection”, and save the change by clicking “OK”.

PLED+

System Panel Header

This header accommodates

several system front panel

functions.

PLED-

PWRBTN#

GND

(9-pin PANEL1)

(see p.10 No. 14)

DUMMY

RESET#

GND

HDLED-

HDLED+

Chassis Speaker Header

Please connect the chassis

speaker to this header.

SPEAKER

DUMMY

+5V

(4-pin SPEAKER 1)

(see p.10 No. 17)

Chassis Fan Connector

(3-pin CHA_FAN1)

Please connect a chassis fan

cable to this connector and

match the black wire to the

ground pin.

GND

+12V

CHA_FAN_SPEED

(see p.10 No. 18)

CPU Fan Connector

(4-pin CPU_FAN1)

Please connect a CPU fan cable

to this connector and match

the black wire to the ground pin.

4 3 2 1

(see p.10 No. 4)

GND

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function.

If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this

motherboard, please connect it to Pin 1-3.

Pin 1-3 Connected

3-Pin Fan Installation

ATX Power Connector

Please connect anATX power

supply to this connector.

(24-pin ATXPWR1)

(see p.10, No. 28)

Though this motherboard provides 24-pin ATX power connector, it can still work

if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power

supply, please plug your power supply along with Pin 1 and Pin 13.

20-Pin ATX Power Supply Installation

ATX 12V Connector

(4-pin ATX12V1)

Please note that it is necessary

to connect a power supply with

ATX 12V plug to this connector

so that it can provides sufficient

power. Failing to do so will cause

the failure to power up.

(see p.10 No. 2)

2.9

Before installing SATAII hard disk to your computer, please carefully read below

SATAII hard disk setup guide. Some default setting of SATAII hard disks may not

be at SATAII mode, which operate with the best performance. In order to enable

SATAII function, please follow the below instruction with different vendors to

correctly adjust your SATAII hard disk to SATAII mode in advance; otherwise, your

SATAII hard disk may fail to run at SATAII mode.

Western Digital

If pin 5 and pin 6 are shorted, SATA 1.5Gb/s will be enabled.

On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the

jumpers from pin 5 and pin 6.

SAMSUNG

If pin 3 and pin 4 are shorted, SATA 1.5Gb/s will be enabled.

On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the

jumpers from pin 3 and pin 4.

HITACHI

Please use the Feature Tool, a DOS-bootable tool, for changing various ATA

features. Please visit HITACHI’s website for details:

http://www.hitachigst.com/hdd/support/download.htm

The above examples are just for your reference. For different SATAII hard

disk products of different vendors, the jumper pin setting methods may not

be the same. Please visit the vendors’ website for the updates.

2.10

(

)

(

)

Installation

This motherboard adopts Intel^®ICH7 south bridge chipset that supports Serial ATA

(SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks

on this motherboard for internal storage devices. This section will guide you to

install the SATA / SATAII hard disks.

STEP1: Install the SATA / SATAII hard disks into the drive bays of your chassis.

STEP2: Connect the SATA power cable to the SATA / SATAII hard disk.

STEP3: Connect one end of the SATA data cable to the motherboard’s SATAII

connector.

STEP4: Connect the other end of the SATA data cable to the SATA / SATAII hard

disk.

2.11 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive

first. Then, the drivers compatible to your system can be auto-detected and listed on

the support CD driver page. Please follow the order from up to bottom side to install

those required drivers. Therefore, the drivers you install can work properly.

2.12 Untied Overclocking Technology

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter “Overclock Mode” option of

BIOS setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU

FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so

that FSB can operate under a more stable overclocking environment.

Please refer to the warning on page 7 for the possible overclocking risk before

you apply Untied Overclocking Technology.

Chapter 3 BIOS SETUP UTILITY

3.1 Introduction

This section explains how to use the BIOS SETUP UTILITY to configure your system.

The BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY. You may

run the BIOS SETUP UTILITY when you start up the computer. Please press <F2>

during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise,

POST will continue with its test routines.

If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by

pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system

chassis. You may also restart by turning the system off and then back on.

Because the BIOS software is constantly being updated, the

following BIOS setup screens and descriptions are for refer-

ence purpose only, and they may not exactly match what you

see on your screen.

3.1.1 BIOS Menu Bar

The top of the screen has a menu bar with the following selections:

Main

To set up the system time/date information

To set up the advanced BIOS features

To set up the PCI features

Advanced

PCIPnP

Boot

To set up the default system device to locate and load the

Operating System

Security

Chipset

Exit

To set up the security features

To set up the chipset features

To exit the current screen or the BIOS SETUP UTILITY

Use < > key or < > key to choose among the selections on the menu bar,

and then press <Enter> to get into the sub screen.

3.1.2

Please check the following table for the function description of each navigation

key.

Navigation Key(s)

Function Description

Moves cursor left or right to select Screens

Moves cursor up or down to select items

To change option for the selected items

To bring up the selected screen

+ / -

<Enter>

<F1>

<F9>

<F10>

<ESC>

To display the General Help Screen

To load optimal default values for all the settings

To save changes and exit the BIOS SETUP UTILITY

To jump to the Exit Screen or exit the current screen

3.2 Main Screen

When you enter the BIOS SETUP UTILITY, the Main screen will appear and display

the system overview

BIOS SETUP UTILITY

Advanced

H/W Monitor

Boot

Security

Exit

Main

System Overview

Use [Enter], [TAB]

or [SHIFT-TAB] to

select field.

System Time

System Date

[14:00:09]

[Thu 10/25/2007]

Use [+] or [-] to

configure system Time.

BIOS Version

Processor Type

Wolfdale1333-D667 P1.00

Intel (R) CPU 3.40 GHz

(64bit)

Processor Speed

Microcode Update

Cache Size

3400 MHz

F34/17

1024KB

Select Screen

Select Item

Total Memory

512MB with 8MB shared memory

Dual-Channel Memory Mode

256MB/266MHz (DDRII533)

Tab

F10

ESC

Change Field

Select Field

General Help

Load Defaults

Save and Exit

Exit

DDRII1

DDRII2

System Time [Hour:Minute:Second]

Use this item to specify the system time.

System Date [Day Month/Date/Year]

Use this item to specify the system date.

3.3 Advanced Screen

In this section, you may set the configurations for the following items: CPU

Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP

Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.

BIOS SETUP UTILITY

H/W Monitor Boot

Security

Exit

Main

Advanced

Configure CPU

Advanced Settings

WARNING : Setting wrong values in below sections

may cause system to malfunction.

CPU Configuration

Chipset Configuration

ACPI Configuration

IDE Configuration

PCIPnP Configuration

Floppy Configuration

SuperIO Configuration

USB Configuration

Select Screen

Select Item

Enter Go to Sub Screen

General Help

Load Defaults

Save and Exit

Exit

F10

ESC

Setting wrong values in this section may cause

the system to malfunction.

3.3.1 CPU Configuration

BIOS SETUP UTILITY

Advanced

CPU Configuration

Select the over clock

mode.

Overclock Mode

[Auto]

[133]

[100]

CPU Frequency (MHz)

PCIE Frequency (MHz)

Boot Failure Guard

[Enabled]

[Auto]

Spread Spectrum

Ratio Actual Value

Enhance Halt State

[Disabled]

[Enabled]

[Disabled]

[Enabled]

[Auto]

Select Screen

Select Item

Max CPUID Value Limit

Intel (R) Virtualization tech.

CPU Thermal Throttling

No-Excute Memory Protection

Hyper Threading Technology

Intel (R) SpeedStep(tm) tech.

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Overclock Mode

Use this to select Overclock Mode. The default value is [Auto]. Cnfiguration

options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].

CPU Frequency (MHz)

Use this option to adjust CPU frequency.

PCIE Frequency (MHz)

Use this option to adjust PCIE frequency.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Spread Spectrum

This item should always be [Auto] for better system stability.

Ratio Status

This is a read-only item, which displays whether the ratio status of this

motherboard is “Locked” or “Unlocked”. If it shows “Unlocked”, you will find

an item Ratio CMOS Setting appears to allow you changing the ratio

value of this motherboard.

Ratio Actual Value

This is a read-only item, which displays the ratio actual value of this

motherboard.

Ratio CMOS Setting

If the ratio status is unlocked, you will find this item appear to allow you

changing the ratio value of this motherboard. If the CPU you adopt supports

EIST (Intel (R) SpeedStep(tm) tech.), and you plan to adjust the ratio value,

please disable the option “ Intel (R) SpeedStep(tm) tech.” in advance.

Enhance Halt State

All processors support the Halt State (C1). The C1 state is supported

through the native processor instructions HLT and MWAIT and requires no

hardware support from the chipset. In the C1 power state, the processor

maintains the context of the system caches.

Max CPUID Value Limit

For Prescott CPU only, some OSes (ex. NT4.0) cannot handle the function

with disable. This should be enabled in order to boot legacy OSes that

cannot support CPUs with extended CPUID functions.

Intel (R) Virtualization tech.

When this option is set to [Enabled], a VMM (Virtual Machine Architecture)

can utilize the additional hardware capabilities provided by Vanderpool

Technology. This option will be hidden if the installed CPU does not support

Intel (R) Virtualization Technology.

CPU Thermal Throttling

You may select [Enabled] to enable P4 CPU internal thermal control mecha-

nism to keep the CPU from overheated. This option will be hidden if the

current CPU does not support CPU Thermal Throttling.

No-Excute Memory Protection

No-Execution (NX) Memory Protection Technology is an enhancement to

the IA-32 Intel Architecture. An IA-32 processor with “No Execute (NX)

Memory Protection” can prevent data pages from being used by malicious

software to execute code. This option will be hidden if the current CPU

does not support No-Excute Memory Protection.

Hyper Threading Technology

To enable this feature, it requires a computer system with an Intel Pentium^®

4 processor that supports Hyper-Threading technology and an operating

system that includes optimization for this technology, such as Microsoft^®

Windows^®XP. Set to [Enabled] if using Microsoft^®Windows^®XP, or Linux

kernel version 2.4.18 or higher. This option will be hidden if the installed

CPU does not support Hyper-Threading technology.

Intel (R) SpeedStep(tm) tech.

Intel (R) SpeedStep(tm) tech. is Intel’s new power saving technology.

Processor can switch between multiple frequency and voltage points to

enable power savings. The default value is [Auto]. Configuration options:

[Auto], [Enabled] and [Disabled]. If you install Windows^®XP and select

[Auto], you need to set the “Power Schemes” as “Portable/Laptop” to en-

able this function. If you install Windows^®Vista^TMand want to enable this

function, please set this item to [Enabled]. This item will be hidden if the

current CPU does not support Intel (R) SpeedStep(tm) tech..

Please note that enabling this function may reduce CPU voltage and lead to system

stability or compatibility issue with some power supplies. Please set this item to

[Disable] if above issue occurs.

3.3.2 Chipset Configuration

BIOS SETUP UTILITY

Advanced

Chipset Configuration

Options

DRAM Frequency

[Auto]

Auto

Flexibility Option

DRAM CAS# Latency

[Disabled]

[Auto]

200MHz (DDRII400)

266MHz (DDRII533)

333MHz (DDRII667)

DRAM RAS# to CAS# Delay

DRAM RAS# Precharge

DRAM RAS# Activate to Precharge

[Auto]

Primary Graphics Adapter

Internal Graphics Mode Select

DVMT Mode Select

[PCI]

[Auto]

[DVMT Mode]

[Maximum DVMT]

Select Screen

Select Item

DVMT/FIXED Memory

+ -

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

OnBoard HD Audio

Front Panel

OnBoard Lan

[Auto]

[Enabled]

PCI Fix Function

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s)

inserted and assigns appropriate frequency automatically. You may also

select other value as operating frequency: [200MHz (DDRII 400)], [266MHz

(DDRII 533)], [333MHz (DDRII 667)]. The configuration options may change

according to the corresponding FSB frequency of the CPU you adopt.

Flexibility Option

The default value of this option is [Disabled]. It will allow better tolerance for

memory compatibility when it is set to [Enabled].

DRAM CAS# Latency

Use this item to adjust the means of memory accessing. Configuration

options are [6], [5], [4], [3] and [Auto].

DRAM RAS# to CAS# Delay

This controls the latency between the DRAM active command and the

read / write command. Configuration options: [2 DRAM Clocks], [3 DRAM

Clocks], [4DRAM Clocks], [5DRAM Clocks], [6DRAM Clocks] and [Auto].

DRAM RAS# Precharge

This controls the idle clocks after a precharge command is issued.

Configuration options: [2 DRAM Clocks], [3 DRAM Clocks], [4 DRAM

Clocks], [5 DRAM Clocks], [6 DRAM Clocks] and [Auto].

DRAM RAS# Activate to Precharge

Thhis controls the number ofDRAM clocks forTRAS. Configuration options:

[4 DRAM Clocks], [5 DRAM Clocks], [6 DRAM Clocks], [7 DRAM Clocks],

[8 DRAM Clocks], [9 DRAM Clocks], [10 DRAM Clocks], [11 DRAM

Clocks], [12 DRAM Clocks], [13 DRAM Clocks], [14 DRAM Clocks], [15

DRAM Clocks] and [Auto].

Primary Graphics Adapter

This item shows the primary graphics adapter. The default value is [PCI].

Configuration options: [Onboard], [PCI] and [PCI Express].

Internal Graphics Mode Select

If you select [Auto], the onboard VGA will be automatically disabled when

you install VGA card; the onboard VGA will be enabled without the installa-

tion of any add-on VGA card. If you select [Enabled, 8MB] or [Enabled,

1MB], the onboard VGA will be enabled.

DVMT Mode Select

Use this option to adjust DVMT mode. Configuration options: [Fixed Mode],

[DVMT Mode] and [Fixed+DVMT Mode]. The default value is [DVMT Mode].

DVMT (Dynamic Video Memory Technology) is an architecture that offers

breakthrough performance for the motherboard through efficient memory

utilization. In Fixed mode, a fixed-size fragment of the system memory is

allocated to the graphics core. In DVMT mode, the graphics driver allocates

memory as needed for running graphics applications and is cooperatively

using this memory with other system components. In Fixed+DVMT mode,

the graphics processor gets a fixed-size chunk of 64MB of memory and up

to 64MB of dynamically-allotted memory. This mode guarantees that at least

64MB of memory is available to the graphics core, with a possibility to

increase this amount to 128MB, if necessary. This item will not be used

under Windows^®Vista^TMOS because the driver will intelligently detect

physical memory available and allocate necessary video memory.

DVMT/FIXED Memory

You are allowed to adjust the shared memory size in this item if you set

DVMT Mode Select as [DVMT Mode]. Configuration options: [64MB], [128MB]

and [Maximum DVMT].

OnBoard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If

you select [Auto], the onboard HD Audio will be disabled when PCI Sound

Card is plugged.

Front Panel

Select [Auto], [Enabled] or [Disabled] for the onboard HDAudio Front Panel.

OnBoard Lan

This allows you to enable or disable the “OnBoard Lan” feature.

PCI Fix Function

This allows you to enable or disable PCI Fix Function. The default value is

[Enabled]. If this item is set to [Enabled], PCI frequency can be fixed at

33.3 MHz. If this item is set to [Disabled], PCI clock can be synchronized to

PCIE clock.

DRAM Voltage

Use this to select DRAM Voltage. Configuration options: [High], [Middle],

[Low] and [Auto]. The default value of this feature is [Auto].

VTT Voltage

Use this to select DRAM Voltage. Configuration options: [High], [Low] and

[Auto]. The default value is [Auto].

3.3.3

BIOS SETUP UTILITY

Advanced

ACPI Configuration

Suspend To RAM

Select auto-detect or

disable the STR

feature.

[Disabled]

[Power Off]

[Disabled]

Restore on AC/Power Loss

Ring-In Power On

PCI Devices Power On

PS / 2 Keyboard Power On

RTC Alarm Power On

[Disabled]

ACPI HPET Table

Select Screen

Select Item

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Suspend to RAM

This field allows you to select whether to auto-detect or disable the

Suspend-to-RAM feature. Select [Auto] will enable this feature if the

system supports it.

Restore on AC/Power Loss

This allows you to set the power state after an unexpected AC/Power

loss. If [Power Off] is selected, the AC/Power remains off when the power

recovers. If [Power On] is selected, the AC/Power resumes and the

system starts to boot up when the power recovers.

Ring-In Power On

Use this item to enable or disable Ring-In signals to turn on the system from

the power-soft-off mode.

PCI Devices Power On

Use this item to enable or disable PCI devices to turn on the system from the

power-soft-off mode.

PS/2 Keyboard Power On

Use this item to enable or disable PS/2 keyboard to turn on the system from

the power-soft-off mode.

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the

system.

ACPI HPET Table

Use this item to enable or disable ACPI HPET Table. The default value is

[Disabled]. Please set this option to [Enabled] if you plan to use this

motherboard to submit Windows^®Vista^TMcertification.

3.3.4

BIOS SETUP UTILITY

Advanced

Set [Compatible]

when Legacy OS

(MS-DOS, Win NT)

device is used.

IDE Configuration

[Enhanced]

ATA/IDE Configuration

Set [Enhanced]

when Native OS

(Win2000 / XP)

is used.

SATAII

IDE1 Master

IDE1 Slave

[Hard Disk]

[Not Detected]

[ATAPI CDROM]

[Not Detected]

Select Screen

Select Item

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

ATA/IDE Configuration

Please select [Compatible] when you install legacy OS (Windows NT). If

native OS (Windows 2000 / XP) is installed, please select [Enhanced].

When [Compatible] is selected

Combined Option

It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA

1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA

3, IDE 1], then SATAII_2, SATAII_4 will not work. Likewise, if it is set to [IDE

1, SATA 2, SATA 4], then SATAII_1, SATAII_3 will not work.

Because Intel^®ICH7 south bridge only supports four IDE devices

under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2,

SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4]

when the installed device is used with legacy OS.

[SATA 1, SATA 2,

SATA 3, SATA 4]

[SATA 1, SATA 3,

IDE 1]

[IDE 1, SATA 2,

SATA 4]

Master

Slave

SATAII 1, SATAII 2

SATAII 3, SATAII 4

SATAII 1

SATAII 3

SATAII 2

SATAII 4

IDE Device Configuration

You may set the IDE configuration for the device that you specify. We will

use the “Primary IDE Master” as the example in the following instruction.

BIOS SETUP UTILITY

Advanced

Primary IDE Master

Select the type

of device connected

to the system.

Device

Vendor

Size

:Hard Disk

:ST340014A

:40.0 GB

LBA Mode

Block Mode

PIO Mode

Async DMA

Ultra DMA

S.M.A.R.T.

:Supported

:16Sectors

:MultiWord DMA-2

:Ultra DMA-5

:Supported

Type

[Auto]

[Disabled]

[Enabled]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

LBA/Large Mode

Block (Multi-Sector Transfer)

PIO Mode

DMA Mode

S . M . A . R . T .

32Bit Data Transfer

F10

ESC Exit

TYPE

Use this item to configure the type of the IDE device that you specify.

Configuration options: [Not Installed], [Auto], [CD/DVD], and [ARMD].

[Not Installed]: Select [Not Installed] to disable the use of IDE device.

[Auto]: Select [Auto] to automatically detect the hard disk drive.

After selecting the hard disk information into BIOS, use a disk

utility, such as FDISK, to partition and format the new IDE hard

disk drives. This is necessary so that you can write or read

data from the hard disk. Make sure to set the partition of the

Primary IDE hard disk drives to active.

[CD/DVD]: This is used for IDE CD/DVD drives.

[ARMD]: This is used for IDE ARMD (ATAPI Removable Media Device),

such as MO.

LBA/Large Mode

Use this item to select the LBA/Large mode for a hard disk > 512 MB under

DOS and Windows; for Netware and UNIX user, select [Disabled] to

disable the LBA/Large mode.

Block (Multi-Sector Transfer)

The default value of this item is [Auto]. If this feature is enabled, it will

enhance hard disk performance by reading or writing more data during

each transfer.

PIO Mode

Use this item to set the PIO mode to enhance hard disk performance by

optimizing the hard disk timing.

DMA Mode

DMA capability allows the improved transfer-speed and data-integrity for

compatible IDE devices.

S.M.A.R.T.

Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,

and Reporting Technology) feature. Configuration options: [Disabled], [Auto],

[Enabled].

32-Bit Data Transfer

Use this item to enable 32-bit access to maximize the IDE hard disk data

transfer rate.

3.3.5 PCIPnP Configuration

BIOS SETUP UTILITY

Advanced

Value in units of PCI

Advanced PCI / PnP Settings

clocks for PCI device

latency timer

PCI Latency Timer

PCI IDE BusMaster

[32]

[Enabled]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

F10

ESC Exit

PCI Latency Timer

The default value is 32. It is recommended to keep the default value unless

the installed PCI expansion cards’ specifications require other settings.

PCI IDE BusMaster

Use this item to enable or disable the PCI IDE BusMaster feature.

3.3.6

In this section, you may configure the type of your floppy drive.

BIOS SETUP UTILITY

Advanced

Floppy Configuration

Floppy

Select the type of

floppy drive

connected to the

system.

[1.44 MB 3¹"]

Select Screen

Select Item

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

3.3.7 Super IO Configuration

BIOS SETUP UTILITY

Advanced

Configure Super IO Chipset

Allow BIOS to Enable

or Disable Floppy

Controller.

[Enabled]

[3F8 / IRQ4]

[Disabled]

[378]

[ECP + EPP]

[1.9]

OnBoard Floppy Controller

Serial Port Address

Infrared Port Address

Parallel Port Address

Parallel Port Mode

EPP Version

ECP Mode DMA Channel

Parallel Port IRQ

[DMA3]

[IRQ7]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

F10

ESC Exit

OnBoard Floppy Controller

Use this item to enable or disable floppy drive controller.

Serial Port Address

Use this item to set the address for the onboard serial port or disable it.

Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],

[2E8 / IRQ3].

Infrared Port Address

Use this item to set the address for the onboard infrared port or disable it.

Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3]. If you plan to

use ASRock DeskExpress on this motherboard, please keep this item on

[Disabled] option.

Parallel Port Address

Use this item to set the address for the onboard parallel port or disable it.

Configuration options: [Disabled], [378], and [278].

Parallel Port Mode

Use this item to set the operation mode of the parallel port. The default

value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP

version in the following item, “EPP Version”. Configuration options:

[Normal], [Bi-Directional], and [ECP+EPP].

EPP Version

Use this item to set the EPP version. Configuration options: [1.9]

and [1.7].

ECP Mode DMA Channel

Use this item to set the ECP mode DMA channel. Configuration

options: [DMA0], [DMA1], and [DMA3].

Parallel Port IRQ

Use this item to set the IRQ for the parallel port. Configuration options:

[IRQ5] and [IRQ7].

3.3.8 USB Configuration

BIOS SETUP UTILITY

Advanced

USB Configuration

To enable or disable

the onboard USB

controllers.

[Enabled]

USB Controller

USB 2.0 Support

Legacy USB Support

[Enabled]

[Disabled]

Select Screen

Select Item

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

USB Controller

Use this item to enable or disable the use of USB controller.

USB 2.0 Support

Use this item to enable or disable the USB 2.0 support.

Legacy USB Support

Use this item to enable or disable the support to emulate legacy I/O

devices such as mouse, keyboard,... etc. Or you may select [Auto] so

that the system will start to auto-detect; if there is no USB device

connected, “Auto” option will disable the legacy USB support.

3.4

In this section, it allows you to monitor the status of the hardware on your system,

including the parameters of the CPU temperature, motherboard temperature, CPU fan

speed, chassis fan speed, and the critical voltage.

BIOS SETUP UTILITY

Boot

Security

Exit

Main

Advanced

H/W Monitor

Target Fan Speed

Hardware Health Event Monitoring

Fast

Middle

Slow

CPU Temperature

M / B Temperature

37 C / 98 F

31 C / 87 F

CPU Fan Speed

Chassis Fan Speed

3400 RPM

N / A

Vcore

1.629V

3.306V

5.067V

11.890V

3.30V

5.00V

12.00V

Select Screen

Select Item

F10

ESC

General Help

Load Defaults

Save and Exit

Exit

CPU Quiet Fan

Target CPU Temperature

Tolerance C)

Target Fan Speed

[Enabled]

(

C) [50]

[02]

[Fast]

(

CPU Quiet Fan

This item allows you to identify the temperature of CPU fan. If you set this

option as [Disabled], the CPU fan will operate in full speed. If you set this

option as [Enabled], you will find the items “Target CPU Temperature

(

C)”, “Tolerance ( C)”, and “Minimun Fan Speed” appear to allow you

adjusting them. The default value is [Disabled]. You are allowed to enable

this function only when you install 4-pin CPU fan.

Target CPU Temperature ( C)

The target temperature will be between 45 C and 65 C. The default

value is [50].

Tolerance ( C)

The default value of tolerance is [2], which means the error of the

target CPU temperature will be within 2 C.

Target Fan Speed

Use this option to set the target fan speed. You can freely adjust the

target fan speed according to the target CPU temperature that you

choose. The default value is [Fast]. Configuration options: [Fast], [Middle]

and [Slow].

3.5

In this section, it will display the available devices on your system for you to config-

ure the boot settings and the boot priority.

BIOS SETUP UTILITY

Main

Advanced

H/W Monitor

Boot

Security

Exit

Boot Settings

Configure Settings

during System Boot.

Boot Settings Configuration

[1st Floppy Device]

1st Boot Device

2nd Boot Device

3rd Boot Device

4th Boot Device

Hard Disk Drives

Removable Drives

CD/DVD Drives

[HDD: PM - HDS722580VL]

[CD / DVD: 3S - CD - ROM C]

[USB]

Select Screen

Select Item

Enter Go to Sub Screen

F10

ESC

General Help

Load Defaults

Save and Exit

Exit

3.5.1 Boot Settings Configuration

BIOS SETUP UTILITY

Boot

Boot Settings Configuration

To enable or disable the

boot from onboard LAN

feature.

Boot From Onboard LAN

Bootup Num-Lock

[Disabled]

[On]

Select Screen

Select Item

+ -

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Boot From Onboard LAN

Use this item to enable or disable the Boot From Onboard LAN feature.

Boot Up Num-Lock

If this item is set to [On], it will automatically activate the Numeric Lock

function after boot-up.

3.6

In this section, you may set or change the supervisor/user password for the system.

For the user password, you may also clear it.

BIOS SETUP UTILITY

Main

Advanced

H/W Monitor

Boot

Security

Exit

Security Settings

Install or Change the

password.

Supervisor Password : Not Installed

User Password : Not Installed

Change Supervisor Password

Change User Password

Select Screen

Select Item

Enter Change

F10

ESC

General Help

Load Defaults

Save and Exit

Exit

3.7

BIOS SETUP UTILITY

H/W Monitro Boot

Main

Advanced

Security

Exit

Exit Options

Exit system setup

after saving the

changes.

Save Changes and Exit

Discard Changes and Exit

Discard Changes

F10 key can be used

for this operation.

Load Optimal Defaults

Select Screen

Select Item

Enter Go to Sub Screen

F10

ESC

General Help

Load Defaults

Save and Exit

Exit

Save Changes and Exit

When you select this option, it will pop-out the following message, “Save

configuration changes and exit setup?” Select [OK] to save the changes

and exit the BIOS SETUP UTILITY.

Discard Changes and Exit

When you select this option, it will pop-out the following message, “Dis-

card changes and exit setup?” Select [OK] to exit the BIOS SETUP UTILITY

without saving any changes.

Discard Changes

When you select this option, it will pop-out the following message, “Dis-

card changes?” Select [OK] to discard all changes.

Load Optimal Defaults

When you select this option, it will pop-out the following message, “Load

optimal defaults?” Select [OK] to load the default values for all the setup

configurations.

Chapter 4 Software Support

4.1 Install Operating System

This motherboard supports various Microsoft^®Windows^®operating systems: 2000 /

XP / XP 64-bit / Vista^TM/ Vista^TM64-bit. Because motherboard settings and hardware

options vary, use the setup procedures in this chapter for general reference only.

Refer to your OS documentation for more information.

4.2 Support CD Information

The Support CD that came with the motherboard contains necessary drivers and

useful utilities that enhance the motherboard features.

4.2.1 Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD

automatically displays the Main Menu if “AUTORUN” is enabled in your computer.

If the Main Menu did not appear automatically, locate and double click on the

file “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.

4.2.2 Drivers Menu

The Drivers Menu shows the available devices drivers if the system detects

installed devices. Please install the necessary drivers to activate the devices.

4.2.3 Utilities Menu

The Utilities Menu shows the applications software that the motherboard

supports. Click on a specific item then follow the installation wizard to install it.

4.2.4 Contact Information

If you need to contact ASRock or want to know more about ASRock, welcome

to visit ASRock’s website at http://www.asrock.com; or you may contact your

dealer for further information.

Hanns G Computer Monitor HSG1145 User Manual
GE 22430 User Manual
Envision Peripherals EN 780e 17 User Manual
Dell T105 User Manual
DCS BGC 1236 User Manual
Bosch Appliances NGP User Manual
Black Box Computer Hardware LPS500A MM SC User Manual
Atlantis Land A05 15AM L01 User Manual
Asus R7240 2GD3 L R72402GD3L User Manual
AOC LM720 17 User Manual