A
C D X -9 9 3
Na tu r a l Sou n d Com pa ct Disc P la yer
Thank you for selecting this YAMAHA Compact Disc Player.
OWNER’S MANUAL
FEATURES
CONTENTS
• Random Access Programmable Play
• Random-Sequence Play
• Single Track/Entire Disc Repeat Play
• Automatic Spacing Capability
• Automatic Programming for Recording to
Tape
• Automatic Peak Level Searching Capability
• CD Synchronized Recording with a
Compatible YAMAHATape Deck
• Adjustable Display Brightness
• Remote Control Capability
Safety Instructions................................................ 2
Connections ......................................................... 4
Identification of Components................................ 6
Basic Operation.................................................... 8
Random-Sequence Play .................................... 12
Repeat Play........................................................ 12
Program Play...................................................... 13
Index Search ...................................................... 14
Track Programming for Recording to Tape ......... 15
CD Synchronized Recording .............................. 19
Notes about the Remote Control
• Optical and Coaxial Digital Outputs
Transmitter ......................................................... 20
Notes about Handling Compact Discs ............... 20
Troubleshooting .................................................. 21
Specifications ..................................................... 22
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
1
2
To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
7
8
9
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty.
Install your unit in a cool, dry, clean place – away from
windows, heat sources, vibration, dust, moisture, or cold.
To avoid humming sounds, locate the unit away from other
electrical appliances, motors, and transformers. To prevent
fire or electrical shock, do not expose to rain and water.
Do not place another component on top of this unit, as
damage or discoloration on the surface of the unit may
result.
To prevent damage by lightning, disconnect the power
cord from the AC outlet during an electrical storm.
3
4
5
Do not operate the unit upside-down. It may overheat,
possibly causing damage.
10 When disconnecting the power cord from the AC outlet,
Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
grasp the plug; do not pull the cord.
Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Always disconnect the
cords from the AC outlet or other equipment by pulling the
plug itself; never pull on the cord.
6
Do not clean the unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
WARNING
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To avoid electrical shock, do not open the unit. Refer servicing
to qualified personnel only.
DANGER
DANGER: The use of optical instrument with this product will
increase eye hazard.
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780 nm
• Emission Duration: continuous
• Laser Output: max. 44.6 µW*
* This output is the value measured at a distance of about
200 mm from the objective lens surface on the Optical Pick-
up Block.
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is found
to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the problem
by using one of the following measures:
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
Relocate either this product or the device that is being affected by
the interference.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/
s supplied with this product MUST be used. Follow all
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices. Compliance with these requirements
provides a reasonable level of assurance that your use of this
product in a residential environment will not result in harmful
interference with other electronic devices.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave,
Buena Park, CA 90620.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the operation
of other electronic devices.
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
3
CONNECTIONS
• Before making any connections, switch OFF the power to the
• If the placement of this unit creates interference (noise) in
other equipment, such as a tuner, relocate this unit away
from the affected equipment.
unit and the amplifier or other components.
• Connections should be made to the correct input terminals of
the amplifier or other components.
CDX-993
LINE OUT
VARIABLE FIXED
DIGITAL AUDIO OUT
OP TICAL
COAXIAL
1
1
To AC outlet
D
IG IT
A
L
O
U
T
3
2
Optical fiber cable
(not included)
Connection cord
(not included)
1
Connection cord
(included)
2
Optical fiber cable
(not included)
OP TICAL
COAXIAL
C D
D IG IT A L IN
Amplifier
4
To connect this unit to your amplifier, choose one of the following procedures:
1 When the LINE OUT (analog) terminals of
2 When the DIGITAL OUT (OPTICAL)
this unit are used
terminal(s) of this unit is used
This unit has two DIGITAL OUT (OPTICAL) terminals on
the front panel and the rear panel.
• Before using the terminal on the rear panel, remove the
terminal’s cover.
• Make the connection from the terminal(s) to the optical
input terminal(s) of an amplifier and/or other digital audio
components by using a commercially available optical
fiber cable(s).
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function correctly.
• Be sure to replace the terminal’s cover when the terminal
on the rear panel is not being used, in order to protect
from dust.
• The terminal(s) can also be connected to the optical
input terminal of a DAT (Digital Audio Tape) deck or MD
(Mini Disc) deck etc. to record a CD directly.
• The output level of these terminals is not variable.
• Connect to either the VARIABLE terminals or the FIXED
terminals. (As a general rule, connect to the FIXED
terminals.)
VARIABLE:The output level of these terminals can be
adjusted by using the OUTPUT LEVEL
button on the remote control transmitter (or
OUTPUT LEVEL control on the front panel).
FIXED:
The output level of these terminals is not
variable.
• Be sure that the left (“L”) and right (“R”) LINE OUT
terminals are connected to the corresponding (left and
right) terminals of the amplifier or other component.
• Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
terminals of the amplifier. If the amplifier does not have
such terminals, use the “TAPE PB” terminals. For
additional details concerning these connections, refer to
the operation instructions for the amplifier being used.
• The LINE OUT terminals of this unit are numbered 1.
When connecting this unit with a YAMAHA amplifier or
receiver whose terminals on the rear panel are
3 When the DIGITAL OUT (COAXIAL) terminal
of this unit is used
numbered as 1, 2, 3, etc., connect the LINE OUT
terminals of this unit to the input terminals numbered 1
on the rear of the amplifier or receiver.
• Make the connection from this terminal to the digital
input terminal of an amplifier by using a connection cord.
• The output level of this terminal is not variable.
5
IDENTIFICATION OF COMPONENTS
(
) indicates the page number on which the control part is best described.
FRONT PANEL
• The control functions on the front panel and on the remote
control transmitter are virtually identical, with the exceptions
below.
•
(PLAY/PAUSE) button on the front panel has both the
functions of the PLAY button and the PAUSE button on the
remote control transmitter.
AUTO DISPLAY OFF indicator (p. 11)
Remote control sensor (p. 20)
Display panel
POWER switch (p. 8)
Disc Tray (p. 8)
A
U
T
O
D
IS
P
L
A
Y
O
F
F
P
O
W
E
R
O
P
E
N
/C
L
O
S
E
R
E
P
E
A
O
T
S
K
IP
D
IG IT
A
L
O
U
T
P
H
O
N
E
S
O
U
T
P
0
U
T
L
1
E
0
V
E
L
P
R
O
G
T
A
P
E
P
E
A
K
S
P
A
C
E
T
IM
E
+1
0
1
2
3
4
5
6
7
8
9
0
R
A
N
D
M
S
E
A
R
C
H
OUTPUT LEVEL control (p. 11)
PHONES jack (p. 11)
Open/close the control door
When it is not necessary to operate controls inside the control door, close the door.
To open the door
To close the door
6
REMOTE CONTROL TRANSMITTER
DIMMER button (p. 11)
TAPE button (p. 15)
SYNCHRO button (p. 19)
PEAK button (p. 18)
TIME button (p. 10)
OPEN/CLOSE button (p. 8)
CLEAR button (p. 14)
O
P
E
N
/
E
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E R
T IM
E
C
L O
S
P
E
A
K
T A
E
C
L E
A
R
P
R
O
G
SPACE button (p. 10)
PROG (program) button (p. 13)
1
2
5
8
3
6
9
IN
D
E
X
INDEX button (p. 14)
4
7
+I0
0
Number buttons (p. 9)
R
E
P
E
A
S
T
R
C
A
H
N
D
O
M
RANDOM button (p. 12)
REPEAT button (p. 12)
E
A
R
SEARCH button (p. 10)
–
O
U
T
P
U
T
L E
V
E
L
+
S
K
IP
SKIP button (p. 9)
OUTPUT LEVEL button (p. 11)
S
T O
P
P
A
U
S
E
P
L A
Y
PLAY button (p. 8)
STOP button (p. 9)
PAUSE button (p. 9)
* This manual describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use
the corresponding buttons on the front panel.
7
BASIC OPERATION
O
P
E
N
/
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E
R
T
IM
E
C
L
O
S
E
2, 3
4
P
E
A
K
T
A
E
C
L
E
A
R
P
R
O
G
1
1
2
5
8
3
6
9
IN
D
E
X
P
O
W
E
R
4
7
+I0
0
R
E
P
E
A
S
T
E
R
C
A
H
N
D
O
M
A
R
–
O
U
T
P
U
T
L
E
V
E
L
+
S
K
IP
S
T
O
P
P
A
U
S
E
P
L
A
Y
1
2
Turn the power on.
3
4
Close the disc tray.
O
P
E
N
/
E
C
L O
S
P O W E R
Load a disc.
Label side up
O
C
P
E
N
S
/
E
P
L A
Y
P
O
W
E
R
L O
Play will begin from the first track of the disc.
Disc tray
Notes
Display information during disc play
• After closing the disc tray by pressing the OPEN/CLOSE
button, the display shows the total number of tracks and the
total recorded time of the disc for a few seconds.
SINGLE
TOTAL
3
4
5
6
7
8
9
1 0 11 12
1
2
3
4
5
6
7
8
9
1 0 11 12
• You can also close the disc tray by pressing the PLAY button
(or button on the front panel), a number button, the
RANDOM button, or by pressing the front edge of the disc
tray gently. If the tray is closed in any of these ways, play will
begin automatically, however, the display will not show the
total number of tracks and the total recorded time of the disc.
1 Shows the track number selected or being played.
2 Shows the time displays. (Refer to “Selecting time displays”
on page 10.)
3 Shows the CD track numbers (up to 20). After each track is
played, its corresponding number disappears so that
remaining track numbers can be seen at a glance.
To turn off the power
Press the POWER switch again.
* If you turn on the power again with a CD in the tray, you can
start playing the CD automatically.
8
To stop play temporarily
To stop play completely
P
A
U
S
E
S
T O
P
To resume play, press the PAUSE button again (or press the
PLAY button).
*
button on the front panel can also be used to stop
play temporarily or to resume play.
To play a desired track on the disc
DIRECT PLAY
SKIP PLAY
Select a desired track using the number buttons.
To skip to a succeeding track, press the SKIP
button once
or repeatedly until the desired track number appears.
5
S
K
IP
To skip to the beginning of the current track, press the
SKIP button once.
The selected track
number is displayed.
1
2
3
4
5
6
7
8
9
S
K
IP
Example: To select track 25,
Press the number +10 button twice, then press the number
5 button once.
To skip to a preceding track, press the SKIP
repeatedly until the desired track number appears.
button
+I0
5
S
K
IP
(twice)
* If you enter a number that is higher than the last track
number on the disc, the final track is played.
• These operations can also be performed when the unit is in
the pause or stop mode.
• When using the SKIP button:
If the button is pressed and held, the track number
continuously changes to higher numbers (or lower
numbers).
9
To advance or reverse play rapidly (MANUAL SEARCH)
• The sound can be heard (although slightly garbled) during
To advance rapidly
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
S
E A R C H
• Manual search can also be performed while disc play is
paused, though no sound will be heard.
(Press and hold.)
To reverse rapidly
S
E A R C H
(Press and hold.)
Selecting time displays
You can select any of the four time displays by pressing the TIME button.
1 Elapsed time of the track now playing
4 Total remaining time on the disc
TOTAL
REMAIN
2
3
4
5
6
7
8
9
1 0 11 12
2
3
4
5
6
7
8
9
1 0 11 12
T IM
E
2 Remaining time of the track now playing
3 Total disc play time
TOTAL
REMAIN
2
3
4
5
6
7
8
9
1 0 11 12
2
3
4
5
6
7
8
9
1 0 11 12
Automatic spacing
If you record a disc onto tape with an insufficient time space
between tracks, the tape deck will not be able to perform blank
search operations on the tape correctly. Such a search mistake
of the deck can be prevented by pressing the SPACE button to
insert spaces of about 4 seconds automatically between the
tracks before recording.
Note
When the automatic spacing function is in effect, the display of
the total time and of the total remaining time will include each
of the 4 second non-recorded intervals placed between tracks.
To cancel the automatic spacing function
S
P
A
C
E
S
P
A
C
E
S P A C E
“SPACE” goes off
from the display.
“SPACE” appears
on the display.
10
Changing the brightness of the display
You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button.
During play
During stopped or paused
Normal illumination
Normal illumination
D
IM
M
E R
Dim
Dim
Dim
(Off)
* While the display illumination is off,
the AUTO DISPLAY OFF indicator
on the front panel is illuminated.
(The AUTO DISPLAY OFF indicator lights up.
In this state, if a disc is played, the display illumination
will be turned off.)
A
U
T
Y
O
D
IS
P
L A
O
F
F
When you listen with headphones
P
H
O
N
E S
Set the OUTPUT LEVEL control on the front panel to “0”
(minimum).
–
O
U
T
P
U
T
L E
V
E
L
+
Connect the headphones to the PHONES jack and adjust the
volume by using the OUTPUT LEVEL button (or OUTPUT
LEVEL control on the front panel).
11
RANDOM-SEQUENCE PLAY
The unit can play the tracks on a disc in a random sequence selected by the unit’s microcomputer.
Notes
To perform random-sequence play
• This feature will not function during programming, or during
programmed play.
R
A
N
D
O
M
• If the SKIP
play, the next randomly programmed track will be played. If
the SKIP button is pressed, play will return to the
beginning of the current track.
This indication appears during random track
selection.
button is pressed during random-sequence
•
To cancel random-sequence play
• Total remaining time on the disc will not be displayed during
random-sequence play.
S
T O
P
R
A
N
D
O
M
or
• If the power is switched off during the random-sequence play,
pressing the POWER switch again to turn the unit on will
automatically restore the random-sequence play. This feature
is useful for timer play.
REPEAT PLAY
You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change
whenever you press the REPEAT button.
SINGLE REPEAT
A single track is repeatedly played.
(Off)
* This is also available in the programmed-play mode and the
random-sequence play mode.
* If the repeat play mode is switched off, the programmed-play
R
E
P
E
A
T
mode or the random-sequence play mode will be resumed.
SINGLE
REPEAT
FULL REPEAT
All tracks (the entire disc) are played repeatedly.
* In the programmed-play mode, all programmed tracks are
repeatedly played.
* In the random-sequence play mode, all randomly sequenced
tracks are repeatedly played in the same order.
FULL
REPEAT
* If the power is switched off during FULL REPEAT play mode,
pressing the POWER switch again to turn the unit on will
automatically restore FULL REPEAT play.
12
PROGRAM PLAY
By programming tracks, you can enjoy listening to your favorite tracks in any desired order. As many as 40 tracks can be
programmed in sequence.
O
P
E
N
/
E
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E
R
T
IM
E
C
L
O
S
P
E
A
K
T
A
E
C
L
E
A
R
P
R
O
G
1
2
5
8
3
6
9
2
4
IN
D
E
X
4
7
+I0
0
3
1
R
E
P
E
A
S
T
E
R
C
A
H
N
D
O
M
A
R
–
O
U
T
P
U
T
L
E
V
E
L
+
S
K
IP
S
T
O
P
P
A
U
S
E
P
L
A
Y
3
Program a desired track by pressing the corresponding
number button.
1
2
Stop the unit.
S
T O
P
6
* Repeat this operation to program more tracks. You can
select the same track again.
4
P
R
O
G
PROGRAM
TOTAL
P
L A
Y
Flashes.
Notes
Display information during programming
• In step 2, if “P-01” does not appear on the display, press the
TIME button.
PROGRAM
• If, during programming, the TIME button is pressed, the
program number display is changed to display the total time
of the programmed tracks. To return to the previous display,
press the TIME button again.
TOTAL
• The SKIP (
Program Play to skip to tracks within the program.
• The SEARCH ( and ) button can be used during
and
) button can be used during
Program Play to search all tracks, including unprogrammed
tracks.
PROGRAM
TOTAL
• You can insert a pause in your program by pressing the
TAPE button instead of a number button. (In this case,
1
2
3
4
5
6
“
B” appears on the display.)
1 Shows the program number for the track to be entered
next.
2 Shows the selected track number.
3 Shows the total time of the tracks currently programmed.
4 Shows only the numbers of programmed tracks.
* If the total time becomes 100 minutes or more, the highest
position of a figure will not be displayed.
13
To stop Program Play
To correct program data
Press the STOP button. The first programmed track number will
be displayed.
1. Follow the procedure described in “To check program
data.”
To resume play, press the PLAY button. Play will begin from the
beginning of the program.
2. Display the track number to be corrected by pressing the
SKIP button.
3. Press a number button to select a track to replace the one
displayed. The previously programmed track will be cleared
from the memory and the new one will be programmed.
4. After the correction has been completed, press the PROG
button or the PLAY button.
To check program data
1. Press the STOP button to stop the program play.
2. Press the PROG button.
3. Press the SKIP
button. Each time you press this
To cancel a program sequence
button, the track number and the program number are
displayed in the order of the program. When you want to
check the preceding tracks, press the SKIP
button.
There are three methods, as described below.
• Press the STOP button or the CLEAR button while the unit is
stopped.
• Open the disc tray.
• Switch off the power.
INDEX SEARCH
If the disc includes index numbers, play can be started from any desired index number.
O
P
E
N
/
E
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E
R
T
IM
E
C
L
O
S
P
E
A
K
T
A
E
C
L
E
A
R
P
R
O
G
1
2
5
8
3
6
9
IN
D
E
X
2
4
7
+I0
0
1, 3
R
E
P
E
A
S
T
E
R
C
A
H
N
D
O
M
A
R
–
O
U
T
P
U
T
L
E
V
E
L
+
S
K
IP
S
T
O
P
P
A
U
S
E
P
L
A
Y
To cancel the index search function
Press the INDEX button.
1
Select a track which has index numbers.
5
Notes
• Not all discs have index numbers. The index system is a
method for sub-dividing tracks into smaller divisions (for
example, the movements within classical symphonies) for
easier location of those parts. The liner notes with the disc
usually tell if such index numbers are included.
• If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.
• For some discs, play may begin slightly prior to the actual
designated index point.
• If the disc has no encoded index points, play will begin from
the start of the selected track.
2
3
IN
D
E X
INDEX
5
6
7
8
9
1 0 11 12
• The index number can be designated only while “INDEX”
appears on the display.
Select the desired index number.
6
14
TRACK PROGRAMMING FOR RECORDING TO TAPE
The unit can automatically program tracks considering the tape’s total time. This convenient feature can help you to program tracks
so that they fit onto the tape with the least amount of unrecorded space remaining at the end of each side (A and B) of the tape.
L Automatic tape-programming
The unit can automatically program tracks on a disc in their
original order.
4
5
Otherwise, you can enter the tape’s total possible
recording time manually.
Example: For a C-64 tape (32 minutes on each side)
3
2
6
4
O
P
E
N
/
E
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E
R
T
IM
E
C
L
O
S
+
P
E
A
K
T
A
E
C
L
E
A
R
P
R
O
G
1
2
5
8
3
6
9
IN
D
E
X
4
7
+I0
0
4
7
Press the REPEAT button.
R
E
P
E
A
S
T
E
R
C
A
H
N
D
O
M
5
1
A
R
R
E
P
E
A
T
–
O
U
T
P
U
T
L
E
V
E
L
+
S
K
IP
S
T
O
P
P
A
U
S
E
P
L
A
Y
6, 7
The unit automatically programs tracks for side A and side
B separately considering the tape’s total time.
1
Stop the unit.
6
Begin recording on the tape deck and press the
PLAY button on this unit at the same time.
S
T O
P
7
The unit will pause at the end of side A of the tape.
Turn the tape over to side B, resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit.
* The peak level searching function of this unit is useful for
adjusting the recording level on the tape deck. (Refer to
page 18.)
Notes
• All the tracks may not be programmed if the tape’s length is
not enough. To program all tracks, use a longer tape.
• In step 5, you can check the program data for side A and
side B.
2
You can automatically insert additional time space
between tracks. (Refer to page 10.)
S
P
A
C
E
S P A C E
PROGRAM
A
1
TOTAL
2
3
4
5
3
Enter the tape’s total possible recording time.
T A
P
E
1 The total number of programmed tracks of each side
appears momentarily when the automatic programming is
finished. Then the first programmed track number for side
A reappears.
2 Shows the total time of programmed tracks for each side.
3 Shows the side of the tape.
You can select any of four tape lengths by pressing the
TAPE button.
4 Shows the programmed track numbers for each side.
T
A
P
E
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
(Off)
• You can use “CD SYNCHRONIZED RECORDING” if you
have a YAMAHA tape deck with this function. In step 6 and 7,
press the SYNCHRO button then press the PLAY button on
this unit’s remote control transmitter. Recording automatically
begins. (For details, refer to page 19.)
15
L Manual tape-programming
For recording tracks in any desired order onto a tape.
5
Select the track numbers to be recorded on side B in
any desired order.
4
1
4
7
2
5
8
3
6
9
O
P
E
N
/
E
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E
R
T
IM
E
C
L
O
S
P
E
A
K
T
A
E
C
L
E
A
R
P
R
O
G
+I0
0
1
2
5
8
3
6
9
2
IN
D
E
X
4
7
+I0
0
3, 5
R
E
P
E
A
S
T
E
R
C
A
H
N
D
O
M
A
R
7
–
O
U
T
P
U
T
L
E
V
E
L
+
S
K
IP
S
T
O
P
P
A
U
S
E
P
L
A
Y
6
7
Begin recording on the tape deck and press the PLAY
button on this unit at the same time.
6, 7
The unit will pause at the end of side A of the tape.
Turn the tape over to side B, resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit.
1
2
Follow steps 1 – 4 on page 15.
Notes
• If, in step 3 or 5, “E rr” appears on the display, the track
number just selected cannot be programmed because there
is not enough time remaining on the tape. However, at this
time, if any other track number is flashing continuously on the
display, you can program it instead of the unprogrammable
one.
P
R
O
G
PROGRAM
A
TOTAL
REMAIN
1
2
3
4
5
6
7
8
9
1 0 11 12
The track numbers you can program flash.
• In step 3 or 5, each time a selection is made, the track number
and the tape’s remaining time will be displayed, and then the
display will change to indicate the next program number.
• You can use “CD SYNCHRONIZED RECORDING” if you
have a YAMAHA tape deck with this function. In step 6 and 7,
press the SYNCHRO button then press the PLAY button on
this unit’s control transmitter. Recording automatically begins.
(For details, refer to page 19.)
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
• A maximum of 40 tracks can be programed. A pause is
counted as one track.
3
Select the track numbers to be recorded on side A in
any desired order.
1
4
7
2
5
8
3
6
9
+I0
0
The selected track numbers stop flashing and remain lit. If
a track is too long to fit on the remaining portion of side A,
the number stops flashing and disappears. You can not
program a number that stops flashing and disappears.
4
When track selection for side A is finished, press the
TAPE button.
T A
P
E
PROGRAM
B
TOTAL
REMAIN
2
3
5
6
7
9
11
A pause is inserted.
16
L Automatic Random Program tape recording
The unit can automatically program tracks in random order for recording to tape.
Notes
• Because the programmed data changes every time the
RANDOM button is pressed, the amount of time remaining at
the end of the tape also changes accordingly.
• If the tape’s length is not enough, not all tracks can be
programmed. In this case, exchange the tape for a longer
one.
O
P
E
N
/
E
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E
R
T
IM
E
C
L
O
S
P
E
A
K
T
A
E
C
L
E
A
R
P
R
O
G
1
2
5
8
3
6
9
IN
D
E
X
4
7
+I0
0
R
E
P
E
A
S
T
E
R
C
A
H
N
D
O
M
• In step 2, you can check the program data for side A and
side B.
A
R
2
4
–
O
U
T
P
U
T
L
E
V
E
L
+
S
K
IP
S
T
O
P
P
A
U
S
E
P
L
A
Y
3, 4
PROGRAM
A
1
TOTAL
2
3
4
5
6
7
8
9
1 0 11 12 13 14 15 16 17 18 19 2 0
1
2
Follow steps 1 – 4 on page 15.
1 The total number of programmed tracks of each side
appears momentarily when the automatic programming is
finished. Then the first programmed track number for side
A reappears.
R
A
N
D
O
M
2 Shows the total time of programmed tracks for each side.
3 Shows the side of the tape.
4 Shows the programmed track numbers for each side.
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
The unit will automatically program tracks for side A and
side B separately considering the tape’s total time.
• You can use “CD SYNCHRONIZED RECORDING” if your
tape deck has this function. In step 3 and 4, press the
SYNCHRO button then press the PLAY button on this unit’s
remote control transmitter. Recording automatically begins.
(For details, refer to page 19.)
3
Begin recording on the tape deck and at the same time,
press the PLAY button on this unit.
4
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit.
17
Automatic searching for the peak level on a disc
This convenient feature automatically finds level peak in the source. It then plays the peak repeatedly for a few moments in order for
you to adjust the recording level on the tape deck, before you begin recording.
O
P
E
N
/
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E
R
T
IM
E
C
L
O
S
E
2
P
E
A
K
T
A
E
C
L
E
A
R
P
R
O
G
1
2
5
8
3
6
9
IN
D
E
X
4
7
+I0
0
R
E
P
E
A
S
T
E
R
C
A
H
N
D
O
M
A
R
–
O
U
T
P
U
T
L
E
V
E
L
+
S
K
IP
S
T
O
P
P
A
U
S
E
P
L
A
Y
1
To cancel this function
Press the STOP button. (Some other buttons can also be used
to cancel this function.)
1
2
Stop the unit.
S
T O
P
Notes
• Sound peak levels are randomly selected by this unit’s
internal microcomputer. Therefore, even if a peak search is
performed twice or more on the same disc, the same peak
may not be selected each time. However, this will not greatly
affect the adjustment of recording levels.
• In Program Play mode, this feature functions with
programmed tracks only. If Program Play is being performed,
first press the STOP button, and then press the PEAK
button. If Program Play is not being performed, press only
the PEAK button.
P
E
A
K
P E A K
The peak level search is performed on the disc.
PEAK
REPEAT
1
2 3 4 5 6 7 8 9 1 0 11 12
PEAK
REPEAT
1
2 3 4 5 6 7 8 9 1 0 11 12
Next, the part where the source level peaks is repeatedly
played. Adjust the recording level on the tape deck
listening to this sound.
18
CD SYNCHRONIZED RECORDING
This unit can perform automatic synchronized CD to tape recording. With this function, you can record a CD on tape very easily and
more precisely.
This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed near each other so that both can receive the signals from this unit’s remote control
transmitter.
O
P
E
N
/
E
S
Y
S
N
P
C
A
H
C
R
E
O
D
IM
M
P
E
R
T
IM
E
C
L
O
S
3
4
P
E
A
K
T
A
E
C
L
E
A
R
P
R
O
G
1
1
2
5
8
3
6
9
IN
D
E
X
4
7
+I0
0
R
E
P
E
A
S
T
E
R
C
A
H
N
D
O
M
A
R
4
5
–
O
U
T
P
U
T
L
E
V
E
L
+
S
K
IP
S
T
O
P
P
A
U
S
E
P
L
A
Y
1
Load the disc.
4
5
If necessary, select a desired track.
5
O
C
P
E
N
S
/
E
P
O
W
E
R
S
K
IP
L O
or
2
3
Load a tape on the tape deck.
P
L A
Y
* The peak level search function of this unit is useful for
adjusting the recording level on the tape deck. (Refer
to page 18.)
Both CD play and tape deck recording begin.
* CD play begins a little later than recording starts.
S
Y
N
C
H
R
O
6
If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3 – 5 again.
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit flashes on and
off.
To cancel this function
Press the STOP button.
Notes
• To finish or stop the recording, press the stop button on your
tape deck.
• A programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 13 – 14 for the programming procedure.)
• This function can also be used together with the automatic
tape-programming function. (Refer to page 15 – 17.)
19
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
Remote control transmitter operation range
2
Remote control
sensor
1
3
Within approximately
6 m (19.7 feet)
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit than usual, the batteries are weak.
Replace both batteries with new ones.
Notes
Notes
• Use only AA, R6, UM-3 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
• There should be no large obstacles between the remote
control transmitter and the main unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid direct
lighting.
• Remove the batteries if the remote control transmitter will not
be used for an extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
NOTES ABOUT HANDLING COMPACT DISCS
• This compact disc player is designed only for playing
compact discs bearing the mark. Never attempt to load
any other type of disc into the unit.
• Compact discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not wipe
with a circular motion; wipe straight outward from the center.
The unit will also play 8-cm (3-inch) compact discs.
• To remove a disc from its storage case, open the case and
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully.
• Do not try to clean the disc’s surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances might
irreparably damage the disc’s surface.
• Always handle the disc with care so that its surface is not
scratched.
• Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
No!
• Compact discs are not subjected to wear during play, but
damage to the disc surface when the disc is being handled
can adversely affect the disc’s play.
To play a 8-cm (3-inch) CD
Place it in the inner recessed area of the disc tray. Do not put a
normal (12-cm/5-inch) CD on top of a 8-cm CD.
20
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM
PROBABLE CAUSE
REMEDY
The player does not switch ON when
the POWER switch is pressed.
The power cord is not connected or not
completely connected.
Securely connect the power cord.
It happens that this unit does not
work normally.
There is an influence of strong external
noise (lightning, excessive static
electricity, etc.) or a misoperation was
performed while using this unit.
Turn this unit power off and disconnect
the AC power from the AC outlet. After
about 30 seconds have passed, connect
the power and try again.
The disc tray does not close
completely.
A foreign object is obstructing the tray.
Carefully check the disc tray and remove
the foreign object.
Play does not begin.
The disc is damaged.
Check the disc carefully; replace it if
necessary.
There is moisture on the laser pickup.
Wait 20 to 30 minutes after switching the
unit ON before trying to play a disc.
The disc has been loaded upside down.
The disc is dirty.
Reload the disc with the label side up.
Clean the disc.
Play is delayed, or begins at the
wrong place.
The disc may be scratched or damaged.
Check the disc carefully; replace it if
necessary.
No sound.
Improper output cable connections.
Improper amplifier operation.
Connect the cables properly. If the
problem persists, the cables may be
defective.
Set the amplifier controls to the correct
input selection.
Sound “skips.”
Sound “hums.”
The player is being subjected to
vibrations or impacts.
Relocate the player.
The disc is dirty.
Clean the disc.
Improper cable connections.
Securely connect the audio cables. If the
problem persists, the cables may be
defective.
Noise from a nearby tuner.
The tuner is too close to the player.
The disc may be warped.
Move the tuner and player farther apart.
Replace the disc.
Noise from inside of the disc tray.
The remote control transmitter does
not work.
The batteries of this remote control
transmitter are too weak.
Replace the batteries with new ones.
Direct sunlight or lighting (of an inverter
type of fluorescent lamp etc.) is striking
the remote control sensor of the main
unit.
Change position of the main unit.
To prevent a malfunction of this unit
• Do not use any non standard shaped CD (heart etc.) available on the market, because it may damage the unit.
• Do not use a CD with tape, seals, or paste on it, because damage to the unit may result.
21
SPECIFICATIONS
AUDIO SECTION
GENERAL
Power requirements
Frequency response ........................... 2 Hz – 20 kHz, ±0.3 dB
Australia model ................................................. 240 V, 50 Hz
Europe and U.K. models .................................. 230 V, 50 Hz
General model......................... 110/120/220/240 V, 50/60 Hz
Harmonic distortion + noise (1 kHz)............... 0.002% or less
S/N ratio ........................................................... 118 dB or more
Dynamic range .................................................. 98 dB or more
Wow & flutter ..................................................... Unmeasurable
Power consumption ......................................................... 20 W
Dimensions (W × H × D) .......................... 435 × 117 × 388 mm
(17-1/4” × 4-5/8” × 15-3/8”)
Weight ....................................................... 9.6 kg (21 lbs. 3 oz)
Output voltage (1 kHz, 0 dB)
VARIABLE..................................................... 2.0 ±0.5 V max.
FIXED .....................................................................2.0 ±0.5 V
Accessories .................................................... Connection cord
Remote control transmitter
Headphones output (–20 dB) .............. 300 ±60 mV/150 ohms
Batteries (size AA, R6, UM-3)
Please note that all specifications are subject to change
without notice.
22
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
V211050
Printed in Malaysia
|