CDC-95
Natural Sound Compact Disc Player
5-Disc Carousel Auto-changer
PLAYXCHANGE; Disc changing capability while playing another
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc/All Disc Repeat Play
Thank you for selecting this YAMAHA Compact Disc Player.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
OWNER’S MANUAL
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-SERVICEABLE
PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CONTENTS
IMPORTANT!
Please record the serial number of this
unit in the space below.
Safety Instructions.................... 2
Explanation of Graphical Symbols
•
Connections ............................. 4
Identification of Components.... 5
Loading the Disc/Disc Play....... 6
Random-Sequence Play .......... 9
Program Play.......................... 10
Repeat Play............................ 12
Notes about Handling
Compact Discs....................... 13
Troubleshooting...................... 14
Specifications......................... 14
Model:
Serial No.:
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
1
2
To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
9. To prevent damage by lightning, disconnect the power
cord from the household AC outlet during an electrical
storm.
Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not expose
to rain and water.
10. When disconnecting the power cord from the household
AC outlet, grasp the plug; do not pull the cord.
11. When moving the unit, be sure to first disconnect the
power cord from the household AC outlet, and disconnect
cords connected to other equipment.
3
4
5
Do not operate the unit upside-down. It may overheat,
possibly causing damage.
Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip the unit with discs remaining in it.
Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
CAUTION FOR MOVING THIS UNIT
When moving this unit, first remove all discs from the disc tray and
close the tray by pressing the OPEN/CLOSE button, and then
switch off the power after you confirm that the display indicates as
follows.
6
7
Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty.
Never switch off the power if the display is not pictured as above,
otherwise the unit will get out of order during moving because the
internal mechanism is not locked.
8. Do not place another component on top of this unit,
because to do so will discolor or damage the surface of
the unit.
WARNING
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personel only.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
To avoid electrical shock, do not open the unit. Refer
servicing to qualified personnel only.
DANGER
DANGER: The use of optical instrument with this product will
increase eye hazard.
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW*
* This output is the value measured at a distance of about
200mm from the objective lens surface on the Optical Pick-
up Block.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
often undetectable until it is too late, YAMAHA
and the Electronic Industries Association’s
Consumer Electronics Group recommend you to
avoid prolonged exposure from excessive
volume levels.
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing. Since hearing damage from loud sounds is
3
CONNECTIONS
●
●
●
Before making any connections, switch OFF the power to
the unit and the amplifier or other component.
Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
terminals of the amplifier. If the amplifier does not have
such terminals, use the “TAPE PB” terminals. For additional
details concerning these connections, refer to the operation
instructions for the amplifier being used.
Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals
of the amplifier or other component.
If the placement of this unit causes noise to other
equipment, such as a tuner, separate them from each other.
●
This unit
To AC outlet
Connection cord (included)
Amplifier
4
IDENTIFICATION OF COMPONENTS
FRONT PANEL
STOP
button
OPEN/CLOSE button
PAUSE button
PLAYXCHANGE button
PLAY button
button
switch
POWER
DISC-select buttons
Display panel
SEARCH
SKIP button
Disc play MODE-
Disc tray
select button
PLAYXCHANGE
OPEN/CLOSE
STOP
PLAY
PAUSE
DISC
3
DISC SKIP
1
2
4
5
SKIP
SEARCH
REPEAT
RANDOM
POWER
TIME DIMMER
PROG CLEAR MODE
TIME display mode-
select button
DIMMER button
REPEAT button
PROG button
CLEAR button
*Remote control sensor
RANDOM button
DISC SKIP buttons
* Remote control sensor
The remote control sensor receives the control signal from
the remote control transmitter that belongs to the system
amplifier.
5
LOADING THE DISC/DISC PLAY
6 2,4
6
3,6
1
5
1
2
5
Select the disc play mode (DISC MODE: SINGLE or
ALL) while watching the display.
Shows the selected disc
mode.
Label side
upward
“SINGLE” mode: The unit will play a designated disc only.
“ALL” mode: The unit will play all discs in the tray in
sequence.
6
Disc tray
3
4
DISC SKIP
* If necessary, select a desired disc by using a DISC-select
button or the DISC SKIP buttons.
DISC SKIP
Load the fifth disc.
Notes
PLAYXCHANGE
●
After closing the disc tray by pressing the OPEN/CLOSE
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play.
However, in this case, pressing the DISC SKIP buttons has no
effect.
button in the stop mode or after selecting any disc by using
the DISC SKIP buttons, the display shows the total number
of tracks and the total recorded time of the disc to be played
for a few seconds.
Note
You can load or replace discs on the trays when the disc tray
is opening, however, never load a disc on the tray hidden
inside the unit. If doing so, the disc and the unit may be
damaged, because the tray already has a disc, which is being
played.
●
Additionally, you can close the disc tray by pressing the
PLAY button, a DISC-select button or the RANDOM button,
or by pressing the front edge of the disc tray gently. If the
tray is closed in these ways, play will begin automatically,
however, the display will not show the total number of tracks
and the total recorded time of the first disc to be played.
6
To stop play temporarily
To stop play completely
* To resume play, press the PAUSE button again or the
PLAY button.
To play a desired track on the disc
SKIP PLAY
●
To play from the beginning of the track following the one
now playing
●
To play from the beginning of the track now playing
●
To play from the beginning of the track before the one now
playing
(twice)
* These operations can also be performed when the unit is in
the pause or stop mode.
Encloses the tray number of the disc standing by to be
played or the disc now playing.
Display information at disc play
➀
Shows the tray numbers with discs.
Shows the track number to be played.
Shows the time displays. (Refer to “Selecting time
displays” on the next page.)
➁
➂
➃
➀
➁
➂
➃
Displays the numbers that correspond to the numbers of
the tracks (as high as number 15) on the disc. After each
track is played, its corresponding number disappears so
the number of remaining tracks (and their numbers) can be
seen at a glance.
➄
➄
7
To advance or reverse play rapidly (MANUAL SEARCH)
●
The sound can be heard (although slightly garbled) during
To advance rapidly
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
Manual search can also be performed while disc play is
paused, though no sound will be heard.
●
(press and hold)
To reverse rapidly
(press and hold)
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
Total remaining time on the disc
Elapsed time of the track now playing
➃
➀
Total disc play time
Remaining time of the track now playing
➂
➁
Notes
The remaining time
●
will not be displayed for track
➁
number 21 or higher.
You can also select one of the three levels of brightness of
●
the display by pressing the DIMMER button.
8
RANDOM-SEQUENCE PLAY
You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any
desired disc in the disc tray.
2
3
4
1
2
3
Select whether to mix up tracks from one disc or all
discs in the tray.
* If the “SINGLE” disc play mode is selected, next select a
desired disc by using the DISC SKIP buttons or a DISC-
select button.
4
Notes
To cancel random-sequence play
Press the STOP button or RANDOM button once again, or
open the disc tray by pressing the OPEN/CLOSE button.
●
This feature will not function during programming, or during
programmed play.
●
If the POWER is switched off when the random-sequence
play mode is functioning, when the POWER is switched on
again, the unit will begin the random-sequence play
automatically. (This feature is available for timer play.)
●
If the SKIP
play, the next randomly programmed track will be played. If
the SKIP button is pressed, play will return to the
beginning of the track now being played.
button is pressed during random-sequence
●
●
This indication appears while the unit is
mixing up tracks.
Total remaining time on the disc will not be displayed during
random-sequence play.
9
PROGRAM PLAY
You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play.
3
5 1
3
2 4
Stop the unit.
Select the desired track.
1
4
(Select a track
number.)
2
3
(Press once.)
*Repeat step 3 and 4 to set more programs.
When the programming is completed;
5
If necessary, select the desired disc.
DISC SKIP
or
Shows the program number for the track to be set next.
Display information during program play
➀
Shows the selected disc and track number.
Shows the total time of the tracks currently programmed, if
tracks are selected from one disc only.
➁
➂
Shows only the numbers of programmed tracks.
➃
* If “P-01” does not appear in the display after the PROG
button is pressed, press the TIME display mode-select
button.
➀
* If the total time reaches 100 minutes or more, only the last
two-digits will be displayed for the three-digit number.
➁
➂
➃
10
Notes
●
●
You can set as many as 20 programs at one time.
If, during programming, the TIME display mode-select
button is pressed, the program number display can be
changed to display the total time of the programmed tracks .
To return to the previous display, press the TIME display
mode-select button once again.
●
If you will make programming with the DISC 1 tray empty,
be sure to press a DISC SKIP button before starting
programming.
●
●
The total time of the programed tracks will not be displayed,
if tracks are selected from more than one disc.
The total time of the programmed tracks will not be
displayed, if a track number higher than 20 is programmed.
●
●
The SKIP (
playing, but only within the range of the programmed tracks.
The SEARCH ( and ) button can be used during
and
) button can be used during
playing to search through all tracks, including
unprogrammed tracks.
To stop program play
To check programmed data
●
Press the STOP button. The first track number
1. If the unit is in the play mode, press the STOP button.
programmed will be displayed.
To resume play, press the PLAY button. Play will begin
2. Press the PROG button.
3. Each time the SKIP
●
button is pressed, the track
from the beginning of the program.
numbers and sequential order of the programmed tracks
can be checked one after another. The display of the track
number can be returned (sequentially in reverse order) by
To cancel a programmed setting
pressing the SKIP
button.
There are several methods, as described below.
●
Press the CLEAR button while the unit is stopped.
Press the STOP button while the unit is stopped.
Open the disc tray.
To correct programmed data
●
●
1. Follow the procedure described in “To check programmed
data”.
●
Switch off the power.
2. Display the track number to be corrected by pressing the
SKIP button.
3. Press the SEARCH button several times until the track
number to replace the previous one appears, and then
press the SKIP button once. The previously programmed
track is cleared from the memory and the new one is
programmed.
4. After the correction has been completed, press the PROG
button or PLAY button once again.
11
REPEAT PLAY
You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will
change whenever you press the REPEAT button.
REPEAT button
SINGLE REPEAT (S REP)
A single track is repeatedly played.
* This is also available in the programmed-play mode and the
random-sequence play mode. (If the repeat play mode is
switched off, the programmed-play mode or the random-
(OFF)
sequence play mode will be resumed.)
FULL REPEAT (F REP)
In the “SINGLE” disc play mode: A designated disc is played
repeatedly.
In the “ALL” disc play mode: All discs in the disc tray are
repeatedly played.
* In the programmed-play mode, all programmed tracks are
repeatedly played.
* In the random-sequence play mode, all randomly sequenced
tracks are repeatedly played in the same order.
12
NOTES ABOUT HANDLING COMPACT DISCS
●
●
This compact-disc player is designed only for playing of
compact discs bearing the mark. Never attempt to
load any other type of disc into the unit.
Compact discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not
wipe with a circular motion; wipe straight outward from the
center.
The unit will also play 3-inch (8-cm) compact discs.
●
To remove a disc from its storage case, open the case and
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully.
●
●
Do not try to clean the disc's surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances
might irreparably damage the disc's surface.
●
Always handle the disc with care so that its surface is not
scratched.
Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
NO!
●
Compact discs are not subjected to wear during play, but
damage to the disc surface when the disc is being handled
can adversely affect the disc's play.
To play a 3-inch (8-cm) CD
Place it in the inner recessed area of the disc tray. Do not put
a normal (5-inch/12-cm) CD on top of a 3-inch CD.
13
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple
measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and
contact your authorized YAMAHA dealer or service center for assistance.
SYMPTOM
PROBABLE CAUSE
REMEDY
The player does not switch ON when the
POWER switch is pressed.
The power cord is not connected or not completely
connected.
Securely connect the power cord.
The disc tray does not close completely.
A foreign object is obstructing the tray.
Carefully check the disc tray and remove the foreign
object.
A disc number does not illuminate in the
display.
The disc has been loaded upside down.
The disc is damaged.
Load the disc correctly.
Check the disc carefully; replace it if necessary.
There is moisture on the laser pickup.
Wait 20 to 30 minutes after switching the unit ON
before trying to play a disc.
Play does not begin.
The disc has been loaded upside down.
The disc is dirty.
Reload the disc with the label side up.
Clean the disc.
Play is delayed, or begins at the wrong
place.
The disc may be scratched or damaged.
Check the disc carefully; replace it if necessary.
No sound.
Improper output cable connections.
Improper amplifier operation.
Connect the cables properly. If the problem
persists, the cables may be defective.
Set the amplifier controls to the correct input
selection.
Sound “skips”.
Sound “hums”.
The player is being subjected to vibrations or
impacts.
Relocate the player.
The disc is dirty.
Clean the disc.
Improper cable connections.
Securely connect the audio cables. If the problem
persists, the cables may be defective.
Noise from a nearby tuner.
The tuner is too close to the player.
The disc may be warped.
Move the tuner and player farther apart.
Replace the disc.
Noise from inside of the disc tray.
SPECIFICATIONS
AUDIO SECTION
GENERAL
Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB
De-emphasis equalization ......................................... ±0.5 dB
Harmonic distortion+noise
(with L.P.F.)..................................... Less than 0.003% (1 kHz)
S/N ratio ........................................................................ 110 dB
Dynamic range ............................................................... 98 dB
Wow & flutter ................................................... Unmeasurable
Output voltage ............................................................. 2±0.5V
Power requirements
U.S.A. and Canada models ............................ 120V, 60 Hz
Australia and U.K. models ............................. 240V, 50 Hz
Europe model ..................................................230V, 50 Hz
General model ...................... 110/120/220/240V, 50/60 Hz
Power consumption ........................................................ 20W
Dimensions (W x H x D) ................... 435 x 107.5 x 386.6 mm
(17-1/8” x 4-1/4” x 15-3/16”)
Weight ..................................................... 5.9 kg (13 lbs. 0 oz.)
Accessories .................................................. Connection cord
Please note that all specifications are subject to change
without notice.
14
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
|