™
Fast Brew
12 CUP COFFEE MAKER
Models MEFB6B, MEFB6W, MEFB6BCAN, MEFB6WCAN
ADDITIONAL
IMPORTANT SAFEGUARDS
WARNING: This appliance generates heat and escaping steam dur-
ing use. Proper precautions must be taken to prevent the risk of
burns, fires, or other injury to persons or damage to property.
1. All users of this appliance must read and understand these Use &
Care instructions before operating or cleaning this appliance.
2. The cord to this appliance should be plugged into a 120V AC
electrical outlet only.
3. Use water only in this appliance! Do not put any other liquids or food
products in this appliance. Do not mix or add anything to the water
placed in this appliance, except as instructed in the USER MAINTE-
NANCE INSTRUCTIONS to clean the appliance.
4. DO NOT attempt to move an appliance containing hot liquids. Allow
appliance to cool completely before moving.
5. Keep appliance at least 4 inches away from walls or other objects
during operation. Do not place any objects on top of appliance while
it is operating. Place the appliance on a surface that is resistant to
heat.
6. If this appliance begins to malfunction during use, press the ON/OFF
Button to turn the unit OFF, then immediately unplug the cord. Do
not use or attempt to repair the malfunctioning appliance.
7. If this appliance falls or accidentally becomes immersed in water or
any other liquid, unplug it immediately. Do not reach into the water!
Do not use this appliance after it has fallen into or has become
immersed in water. Contact Consumer Service for examination and
repair.
8. Do not leave this appliance unattended during use.
9. DO NOT put Carafe into a microwave.
10. DO NOT leave empty Carafe on Warming Plate when appliance is
turned ON, as the Carafe may crack or become otherwise damaged.
CAUTION: To prevent injury when utilizing Auto Pause and Pour,
replace Carafe within 30 seconds of removing during brewing
process.
2
Polarized Plug
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do
not attempt to modify the plug in any way.
Short Cord Instructions
A short power-supply cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord.
Do not use an extension cord with this product.
Plasticizer Warning
CAUTION: To prevent Plasticizers from migrating from the finish of the
counter top or table top or other furniture, place NON-PLASTIC coasters
or place mats between the appliance and the finish of the counter top or
table top.
Failure to do so may cause the finish to darken. Permanent blemishes
may occur or stains can appear.
Electric Power
If the electrical circuit is overloaded with other appliances, your appliance
may not operate properly. It should be operated on a separate electrical
circuit from other appliances.
Coffee Yield
12 Cup Coffee Maker: 12 (5-oz.) cups.
NOTE: A 5-oz. cup is the American industry standard and is used by
most Coffee Maker manufacturers. To fill your favorite mug, fill Coffee
Maker reservoir with enough water for 4 cups (20 ounces).
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
REMOVE THE BOTTOM COVER. NO USER-SERVICEABLE PARTS
INSIDE. REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PER-
SONNEL ONLY.
3
Getting To Know Your
12 Cup Coffee Maker
Product may vary slightly from illustrations.
4
3
5
6
7
2
1
8
9
1. Glass Carafe with Lid
6. Filter Holder Cavity
7. Indicator Light
8. Warming Plate
Black P/N 31455B
White P/N 31455W
2. Control Panel
3. Shower Head
4. Water Chamber
9. Tea Infusion Basket
Black P/N 31457B
White P/N 31457W
5. Removable Filter Holder
Black P/N 31456B
White P/N 31456W
4
Before Brewing for the First Time
CAUTION: To protect against electric shock, do not immerse the
Coffee Maker or allow AC cord to come into contact with water or
other liquids.
1. After carefully unpacking from carton, the inside of your Coffee
Maker and Glass Carafe must be cleaned. Remove any labels from
the outer surfaces.
2. Brew 12 (5-oz.) cups of fresh water only. Follow the OPERATING
INSTRUCTIONS, but do not add coffee grounds or paper filter to the
Removable Filter Holder.
3. When all the water has brewed into the Carafe, press the AUTO
ON/OFF Button so the unit is turned OFF.
4. Allow the Coffee Maker to cool for 15 minutes, discard the water
from the Carafe, then repeat steps 2 and 3.
5. After the second pot of water has cooled, discard the water and
thoroughly wash the Removable Filter Holder, Glass Carafe and
Carafe Lid in warm, soapy water. Dry all parts thoroughly.
Coffee Filters
Cone-shaped paper filters are available locally at grocery stores and
where coffee makers are sold.
We recommend using Melitta #4 cone-shaped filters.
The use of basket-style paper filters is not recommended, since they do
not conform to the shape of the Removable Filter Holder and may cause
coffee to back up and spill over during brewing.
5
Indicator Light
FIGURE 1:
Control Panel
Setting the Clock
1. Plug the Coffee Maker into a 120V ~ 60 HZ outlet. Display will show
12:00 and will continue to flash until the time is set.
2. Press the HOUR Button until the hour hand is in the correct position.
During the setting, AM/PM on the display will change automatically.
3. Press the MINUTE Button until the minute hand is in the correct
position. The clock should now display the current time of day and
the second hand should be moving.
6
OPERATING INSTRUCTIONS
Brewing Coffee - Immediate Start
NOTE: When brewing coffee, the Tea Infusion Basket is not need-
ed. To remove the Tea Infusion Basket, prop the Carafe Lid open
with one hand and with the other hold the rim of the Tea Infusion
Basket. The tab on the outer rim of the Tea Infusion Basket will be
aligned with the
position located on the bottom side of the
Carafe Lid. Turn the Tea Infusion Basket counter-clockwise until the
tab aligns with the
position located on the bottom of the
Carafe Lid. Remove the Tea Infusion Basket and close the Carafe
Lid.
1. Plug the appliance into a standard 120V AC electrical outlet.
2. Markings on the Carafe indicate the level of water required to brew
the desired number of cups. Fill the Carafe with cold tap water.
Close the Lid back into position.
NOTE: Brewing less than 4 cups is not recommended.
3. Lift up the hinged lid on the top of the unit and slowly pour water into
the Water Chamber.
4. Grasp the Removable Filter Holder and lift straight up and out of the
Filter Cavity. Insert a #4 paper coffee filter inside the Removable
Filter Holder.
We recommend using Melitta #4 cone-shaped filters.
5. Place coffee grounds in the filter, using one level tablespoon of drip
grind coffee for each cup of brewed coffee.
6. Replace the Removable Filter Holder by pushing it down into the
Filter Holder Cavity. When properly seated, the tab on the Filter
Holder will be positioned on the front of the Holder Cavity.
7. Set the Brew Strength Control to the desired strength.
8. Place the Carafe onto the Warming Plate. Make sure the Carafe is
positioned correctly on the Warming Plate under the Auto Pause and
Pour Assembly.
9. Press the AUTO ON/OFF Button once. The Indicator Light will turn
on and the brew cycle will begin.
7
10. If you wish to serve a cup of coffee before brew cycle is
complete, simply remove Carafe from Warming Plate. Dripping will
automatically cease. Return Carafe to position on Warming Plate
within 30 seconds; dripping will resume. If the Carafe is not returned
to the Warming Plate, the coffee may overflow from the Filter Holder.
11. When brewing is completed, the Coffee Maker switches to a Keep
Warm mode which will hold coffee at the proper serving tempera-
ture. To keep the coffee hot, place the Carafe back on the Warming
Plate when not serving.
12. Press the AUTO ON/OFF Button again to turn the unit OFF when
not in use. When the brewing cycle is over, the Coffee Maker will
automatically shut off after two hours. The Indicator Light will turn off.
13. Allow the unit to cool for 10 minutes between cycles.
WARNING: Warming Plate is hot! Do not touch bottom of Carafe or
Warming Plate during or after brewing.
NOTE: The amount of coffee in the Carafe may be slightly less than the
amount of water placed in the Water Chamber, since some of the water is
absorbed by the coffee grounds.
8
Brewing Coffee - Programming Delay Timer
1. Follow steps 1 – 8 in BREWING COFFEE – IMMEDIATE START.
2. Be sure clock is set to the current time (see SETTING THE CLOCK
instructions on Page 6).
3. Press the PROG Button once and release. The Indicator Light will
flash and the time will show 12 : 00.
4. Set the desired program start time by using the HOUR and MIN
Buttons as previously described in SETTING THE CLOCK.
5. During the setting, AM/PM on the display will change
automatically.
6. Press the PROG Button again to complete the programmed start
time setting.
7. After setting, press the AUTO ON/OFF Button once to activate the
programmable function. The Indicator Light will flash to signify the
timer is set.
NOTE: When using the Immediate Start mode after a Programmed
cycle has been used, without unplugging the unit in-between, it may
be necessary to press the AUTO ON/OFF Button two times. The
first time the Indicator Light will flash; the second time the Light will
turn solid and brewing will begin.
8. If you wish to serve a cup of coffee during the brew cycle, simply
remove Carafe from Warming Plate. Dripping will automatically
cease. Return Carafe to position on Warming Plate within 30 sec-
onds; dripping will resume. If the Carafe is not returned to the
Warming Plate, the coffee may overflow from the Filter Holder.
9. When brewing is completed, the Coffee Maker switches to a Keep
Warm mode which will hold coffee at the proper serving tempera-
ture. To keep the coffee hot, place the Carafe back on the Warming
Plate when not serving.
10. Press the AUTO ON/OFF Button again to turn the unit OFF when
not in use. When the brewing cycle is over, the Coffee Maker will
automatically shut off after two hours. The Indicator Light will turn off.
11. Allow the unit to cool for 10 minutes between cycles.
WARNING: Warming Plate is hot! Do not touch bottom of Carafe or
Warming Plate during or after brewing.
9
NOTE: The amount of coffee in the Carafe may be slightly less than the
amount of water placed in the Water Chamber, since some of the water is
absorbed by the coffee grounds.
NOTE: The programmable function must be reset after each programmed
use.
Brewing Tea - Immediate Start
1. Plug the appliance into a standard 120V AC electrical outlet.
2. Fill the Carafe with cold tap water to the 11 cup marking. Close the
Lid back into position.
NOTE: 11 cups is the maximum for brewing tea otherwise the
Carafe will overflow.
NOTE: We do not recommend brewing less than 11 cups of tea.
3. Lift up the hinged lid on the top of the unit and slowly pour water into
the Water Chamber.
4. Make sure there is no paper coffee filter inside the Removable Filter
Holder. This is not needed for the tea cycle, but the Filter Holder
must be in its proper place. When properly seated, the tab on the
Filter Holder will be positioned on the front of the Holder Cavity.
Close the lid back into position.
5. Set the Brew Strength Control to the desired strength.
6. With the Tea Infusion Basket you have the choice to use either
Loose Leaf Tea or Tea Bags.
We recommend using the following quantities, based on brewing 11
cups:
Loose Leaf Tea
Tea Bags
8 teaspoons
8 bags
NOTE: Chart may be altered depending on individual taste prefer-
ences and the type of tea being brewed.
NOTE: If using tea bags, it is necessary to remove any strings
attached.
10
7. To remove the Tea Infusion Basket, prop the
Carafe Lid open with one hand and with the
other hold the rim of the Tea Infusion Basket.
The tab on the outer rim of the Tea Infusion
Basket will be aligned with the
position
located on the bottom side of the Carafe Lid.
Turn the Tea Infusion Basket counter-clock-
wise until the tab aligns with the
posi-
tion located on the bottom of the Carafe Lid.
Remove the Tea Infusion Basket and close
the Carafe Lid.
FIGURE 2:
Tea Infusion Basket Assembly
8. Place tea bags or loose leaf tea into the Tea
Infusion Basket. Be sure that no bags are outside of the basket
opening and if using tea bags, all strings have been removed.
9. Assembly of the Tea Infusion Basket to the Carafe is basically the
reverse of Step 7. Place the Tea Infusion Basket on the bottom side
of the Carafe Lid aligning the tab on the outer rim of the Basket with
the
position, located on the bottom of the Carafe Lid. Hold the
Tea Infusion Basket and turn clockwise until the tab aligns with
the position and locks into place. Close the Carafe Lid.
10. Place the Carafe onto the Warming Plate. Make sure the Carafe is
positioned correctly on the Warming Plate under the Auto Pause and
Pour Assembly.
11. Press the AUTO ON/OFF Button once. The Indicator Light will turn
on and the brew cycle will begin.
12. If you wish to serve a cup of tea before the brew cycle is
complete, simply remove Carafe from Warming Plate. Dripping will
automatically cease. Return Carafe to position on Warming Plate
within 30 seconds; dripping will resume. If the Carafe is not returned
to the Warming Plate, the hot water may overflow from the Filter
Holder.
13. When brewing is completed, the appliance switches to a Keep Warm
mode which will hold tea at the proper serving temperature. To keep
the tea hot, place the Carafe back on the Warming Plate when not
serving.
NOTE: Depending on individual taste preferences and the type of
tea being brewed, you may prefer to let the tea steep longer before
removing the Tea Infusion Basket.
CAUTION: Carafe, Lid, and Tea Infusion Basket are hot after
brewing! Use extreme care when handling these parts.
11
14. Press the AUTO ON/OFF Button again to turn the unit OFF when
not in use. When the brewing cycle is over, the appliance will
automatically shut off after two hours. The Indicator Light will turn off.
15. Allow the unit to cool for 10 minutes between cycles.
WARNING: Warming Plate is hot! Do not touch bottom of Carafe or
Warming Plate during or after brewing.
NOTE: The amount of tea in the Carafe may be slightly less than the
amount of water placed in the Water Chamber, since some of the water is
absorbed by the loose leaf tea or tea bags.
Brewing Tea - Programming Delay Timer
1. Follow steps 1 – 10 in BREWING TEA – IMMEDIATE START.
2. Be sure clock is set to the current time (see SETTING THE CLOCK
instructions on Page 6).
3. Press the PROG Button once and release. The Indicator Light will
flash and the time will show 12 : 00.
4. Set the desired program start time by using the HOUR and MIN
Buttons as previously described in SETTING THE CLOCK.
5. During the setting, AM/PM on the display will change automatically.
6. Press the PROG Button again to complete the programmed start
time setting.
7. After setting, press the AUTO ON/OFF Button once to activate the
programmable function. The Indicator Light will flash to signify the
timer is set.
NOTE: When using the Immediate Start mode after a Programmed
cycle has been used, without unplugging the unit in-between, it may
be necessary to press the AUTO ON/OFF Button two times. The
first time the Indicator Light will flash; the second time the Light will
turn solid and brewing will begin.
8. If you wish to serve a cup of tea before the brew cycle is complete,
simply remove Carafe from Warming Plate. Dripping will automatical-
ly cease. Return Carafe to position on Warming Plate within 30 sec-
onds; dripping will resume. If the Carafe is not returned to the
Warming Plate, the hot water may overflow from the Filter Holder.
9. When brewing is completed, the appliance switches to a Keep Warm
mode which will hold the tea at the proper serving temperature. To
keep the tea hot, place the Carafe back on the Warming Plate when
not serving.
12
NOTE: Depending on individual taste preferences and the type of
tea being brewed, you may prefer to let the tea steep longer before
removing the Tea Infusion Basket and serving.
CAUTION: Carafe, Lid, and Tea Infusion Basket are hot after
brewing! Use extreme care when handling these parts.
10. Press the AUTO ON/OFF Button again to turn the unit OFF when
not in use. When the brewing cycle is over, the appliance will
automatically shut off after two hours. The Indicator Light will turn off.
11. Allow the unit to cool for 10 minutes between cycles.
WARNING: Warming Plate is hot! Do not touch bottom of Carafe or
Warming Plate during or after brewing.
NOTE: The amount of tea in the Carafe may be slightly less than the
amount of water placed in the Water Chamber, since some of the water is
absorbed by the loose leaf tea or tea bags.
NOTE: The programmable function must be reset after each programmed
use.
13
Auto Pause and Pour Feature
The Auto Pause and Pour feature allows you to pour a cup of coffee or
tea before brewing is complete. Simply remove the Carafe from the
Warming Plate. Always keep the Lid on the Carafe down when pouring
the coffee.
IMPORTANT: When using the Auto Pause and Pour feature while the
Coffee Maker is still brewing, the Carafe must be replaced on the
Warming Plate, under the Filter Holder Cavity within 30 seconds to pre-
vent the Filter Holder from overflowing.
Replacing the Carafe will restart the brew-
ing process.
Brew Strength Feature
Use the Brew Strength feature to control
the desired strength of your coffee or tea.
This feature regulates the flow of water to
either slow down or speed up the brewing
process depending on the strength you
desire. Simply adjust the Brew Strength
Control on the top of the lid before start-
ing each brew cycle to achieve desired
strength.
FIGURE 3:
Brew Strength Control
To Brew a Second Pot of Coffee or Tea
To brew a second pot of coffee or tea, turn the appliance OFF for
10 minutes and allow it to cool. Empty used coffee grounds or loose leaf
tea / tea bags and repeat steps for brewing.
CAUTION: Failure to allow appliance to cool completely may cause
water to overheat and spray hot steam. The hot steam can cause
severe burns.
14
Hints For Best Results
• We recommend using coffee which has been ground specifically
for automatic drip coffee makers. This type of coffee is prepared
specifically for your Coffee Maker’s brewing system and promotes
fuller extraction to provide rich, full-bodied coffee.
• Use only cone-shaped filters with this Coffee Maker. Cone-shaped
paper filters are available locally at grocery stores. Use standard, #4
filters. Do not use basket-style paper filters.
We recommend using Melitta #4 cone-shaped filters.
• A clean Coffee Maker is essential for making great tasting coffee.
Regular cleaning, as specified in the USER MAINTENANCE
INSTRUCTIONS, is highly recommended.
• Always use fresh, cold water in your Coffee Maker.
• Store coffee in a cool, dry place. Once coffee has been opened,
keep it tightly sealed in the refrigerator to maintain freshness.
• For optimum coffee, buy whole beans and grind them finely just
before brewing.
• Do not re-use coffee grounds since this will greatly impair
coffee flavor.
• Reheating coffee is not recommended. Coffee is at its peak flavor
immediately after brewing.
• If using the Fast Brew for both coffee and tea, it is recommended to
thoroughly clean the Carafe, Lid, and Removable Filter Holder in
warm soapy water. Wipe the Showerhead, located at the under-
neath side of the appliance’s lid, with a clean, damp cloth.
15
User Maintenance Instructions
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Any servicing that
requires disassembly must be performed by a qualified appliance repair
technician.
Cleaning Instructions
NOTE: Do not place anything other than water or the vinegar cleaning
solution specified in this manual into the Water Chamber.
1. To clean your Coffee Maker after brewing, be sure the Coffee Maker
is turned OFF, unplugged and is cool. Discard the paper filter.
2. Wipe the outside of your Coffee Maker and the Warming Plate with a
soft, damp cloth and dry. Do not use abrasive cleaners or scouring
pads.
3. Hand wash Removable Filter Holder and Tea Infusion Basket in
warm, sudsy water. DO NOT PLACE IN DISHWASHER.
4. The Glass Carafe and Lid may be washed in warm, soapy water.
DO NOT PLACE IN DISHWASHER.
WARNING: Never immerse the Coffee Maker body in water or other
liquid.
WARNING: Rinse Water Chamber with cold water periodically.
NEVER use a cloth to clean or dry the Water Chamber as the cloth
will leave a lint residue and may clog and cause damage to your
Coffee Maker.
16
Mineral Deposits / Decalcifying
Your Coffee Maker must be cleaned when you begin to notice excessive
steaming or the brewing time increases considerably. This condition is
caused by a buildup of lime and mineral deposits from your water. If the
pumping action stops before all the water has been pumped out of the
machine, then the appliance requires decalcification.
The frequency of decalcification depends on the hardness of water used.
It is suggested that this unit be descaled according to the following
intervals:
• Soft water: every 80 brewing cycles
• Hard water: every 40 brewing cycles
17
How To Decalcify Your Coffee Maker
1. Place a #4 cone-shaped paper filter into the Removable Filter
Holder. Make sure the Removable Filter Holder fits securely into the
unit.
2. Fill Carafe with a solution of 2 tablespoons white vinegar to one liter
of cold water. Pour the water and vinegar solution into the Water
Chamber.
3. Place the empty Carafe on the Warming Plate. Plug the Coffee
Maker into an outlet and press the AUTO ON/OFF Button to turn the
Coffee Maker ON.
4. Keep the Coffee Maker ON until the Carafe is half full. Press the
AUTO ON/OFF Button to turn the Coffee Maker OFF and let cool for
1/2 hour.
5. After 1/2 hour, pour the water and vinegar solution back into the
Coffee Maker.
6. Place the empty Carafe on the Warming Plate. Press the AUTO
ON/OFF Button to turn the the Coffee Maker ON and let all the
water and vinegar solution flow through.
7. Discard the solution and the paper filter.
8. After allowing the Coffee Maker to cool for 15 minutes, flush out all
the traces of vinegar by pouring a Carafe full of cold water into the
Water Chamber. Make sure to insert a fresh filter into the Filter
Holder before brewing and place the empty Carafe on the Warming
Plate. Press the AUTO ON/OFF Button to turn the Coffee Maker ON
and allow it to cycle through.
9. At the end of the brew cycle, press the AUTO ON/OFF Button to turn
the Coffee Maker OFF. Discard water in the Carafe. Repeat steps 8 -
9. Unplug the Coffee Maker when finished.
18
NOTES
NOTES
LIMITED ONE-YEAR WARRANTY
Warranty Coverage: This product is warranted to be free from defects in materials or
workmanship for a period of one (1) year from the original purchase date. This product
warranty is extended only to the original consumer purchaser of the product and is not
transferable. For a period of one (1) year from the date of original purchase of the prod-
uct, our Repair Center will, at its option, either (1) repair the product or (2) replace the
product with a reconditioned comparable model. These remedies are the purchaser's
exclusive remedies under this warranty.
Warranty Service: To obtain warranty service, you must call our warranty service num-
ber at 1-800-233-9054 for return instructions on how to deliver the product, in either the
original packaging or packaging affording an equal degree of protection to the Repair
Center specified below. You must enclose a copy of your sales receipt or other proof of
purchase to demonstrate eligibility for warranty coverage.
To return the appliance, ship to:
To contact us, please write to, call, or email:
ATTN: Repair Center
Consumer Relations Department
708 South Missouri Street
Macon, MO 63552 USA
PO Box 7366
Columbia, MO 65205-7366 USA
Phone: 1-800-233-9054
Email: [email protected]
What Is Not Covered: This warranty does not cover damage resulting from misuse,
accident, commercial use, improper service or any other damage caused by anything
other than defects in material or workmanship during ordinary consumer use. This war-
ranty is invalid if the serial number has been altered or removed from the product. This
warranty is valid only in the United States and Canada.
LIMITATION ON DAMAGES: THERE SHALL BE NO LIABILITY FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT.
DURATION OF IMPLIED WARRANTIES: EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ALL IMPLIED WARRANTIES AND CONDITIONS, INCLUDING,
WITHOUT LIMITATION, IMPLIED WARRANTIES AND CONDITIONS OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR USE ON THIS
PRODUCT ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, or allow limitations on how long an implied warranty lasts, so the above limi-
tations or exclusions may not apply to you. This warranty gives you specific legal rights
and you may have other rights under the laws of your jurisdiction.
©
2006 All rights reserved.
Made in China
12/06
|