TELUS
i877 Mike Phone
User’s Guide
Dummy Page - To be discarded before printing
HELLOMOTO
Introducing your new Mike i877 wireless phone. Here’s a quick anatomy lesson.
Left Soft Key
Perform function
in lower left
Right Soft Key
Perform function
in lower right
display.
Smart Key
Speaker On/Off Key
display.
Menu Key
From home screen,
open main menu.
Camera Key
Camera
Camera
Lens
Spotlight
End/Power Key
End calls, exit
menu system,
turns phone
on/off.
Talk Key
Make &
answer calls.
Volume
Buttons
PTT
4-Way
Button
Navigation Key
Memory
OK Key
Audio Jack
Card Slot
Speaker
In menus & lists,
press to select
highlighted option.
Mini USB Connector
Connects charger
and accessories
1
check it out
Home Screen
Main Menu
READY
4/25/07
Customizable
that can be used to
to open the
O
key
Press the Navigation Key
3
4
2
1
Recent Calls
up, down, left or right
(
)
04
B
05pm
BLeqjpTmG
to highlight a menu feature.
More
Exit
Settings screen
Press the
to select.
Okey
Press and hold the
Power Key E for a
few seconds, or until
the screen lights up,
to turn on your
phone.
2
Motorola, Inc.
functionality of such features may be limited in certain devices, or
by certain wireless carriers. Contact your wireless carrier about
feature availability and functionality.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
OPEN SOURCE SOFTWARE INFORMATION
www.hellomoto.com
You may choose to obtain a copy of any source code being made
publicly available by Motorola directly from the Motorola website
opensource.motorola.com.
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for hearing impaired)
1-800-461-4575 (Canada)
Additionally, for instructions on how to obtain a copy of any source
code being made publicly available by Motorola related to
software used in this Motorola mobile device, please send your
request in writing to:
Product Support: www.motorola.com/iden
Certain mobile phone features are dependent on the capabilities
and settings of your service provider’s network. Additionally,
certain features may not be activated by your service provider,
and/or the provider's network settings may limit the feature’s
functionality. Always contact your service provider about feature
availability and functionality. All features, functionality, and other
product specifications, as well as the information contained in this
user's guide are based upon the latest available information and
are believed to be accurate at the time of printing. Motorola
reserves the right to change or modify any information or
specifications without notice or obligation.
MOTOROLA, INC.
OSS Management
600 North US Hwy 45
Libertyville, IL 60048
USA.
Motorola has created the www.opensource.motorola.com
to serve as a portal for interaction with the software community-
at-large.
This device supports Bluetooth 2.0 including EDR and A2DP Stereo
profiles. In order for Bluetooth devices to communicate with one
another, they must utilize the same Bluetooth profile. To determine
the profiles supported by other Motorola devices, visit
www.hellomoto.com/bluetooth. For other devices, contact their
respective manufacturer.
To see additional information regarding licenses,
acknowledgments and required copyright notices for open source
packages used in this Motorola mobile device, follow these
instructions:
From the phone Main Menu, select Games and Apps.
>
OpenSourceNotices.
Certain Bluetooth features including those listed may not be
supported by all compatible Bluetooth-enabled devices, and/or the
3
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. Java and all other Java-
based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2007.
Manual Number: NVN5402A
4
contents
check it out . . . . . . . . . . . 2
menu map. . . . . . . . . . . . 7
Use and Care . . . . . . . . . 9
essentials . . . . . . . . . . . 10
about this guide . . . . . 10
activate your
Mike account . . . . . . . . 11
SIM card. . . . . . . . . . . . 11
memory card . . . . . . . 13
battery . . . . . . . . . . . . 14
turn it on & off . . . . . . 18
make a phone call. . . . 19
answer a phone call . . 19
make a private call . . . 19
answer a private call. . 20
store a phone number
call a stored phone
PT manager . . . . . . . . 55
MMS . . . . . . . . . . . . . 55
Mike’s wireless web
services . . . . . . . . . . . 72
bluetooth® . . . . . . . . . 74
clock screen saver . . . 79
basics. . . . . . . . . . . . . . . 80
display. . . . . . . . . . . . . 80
main menu . . . . . . . . . 81
text entry . . . . . . . . . . 81
navigation key. . . . . . . 84
handsfree speaker . . . 84
codes & passwords . . 85
lock & unlock phone . . 85
transmitters . . . . . . . . 86
use GPS with
number or private ID . 22
find your phone number
and Private ID. . . . . . . 23
text messages . . . . . . 23
manage memory . . . . 27
use your phone as USB
mass storage device . 27
use your phone
as a modem . . . . . . . . 28
accessories. . . . . . . . . 30
for more information. . 30
main attractions . . . . . . 31
music player . . . . . . . . 31
media center . . . . . . . 40
camera . . . . . . . . . . . . 43
PTV features. . . . . . . . 47
one touch PTT . . . . . . 54
map software . . . . . . . 86
or private ID . . . . . . . . 21
contents
5
features for the
hearing impaired . . . . . 88
features for the
net alerts . . . . . . . . . . 102
Motorola Limited Warranty
and Canada . . . . . . . . . 124
Hearing Aid
Compatibility. . . . . . . . 129
World Health
Organization . . . . . . . . 131
Patent and Trademark
Information . . . . . . . . . 133
advanced calling . . . . 103
alarm clock. . . . . . . . . 104
datebook . . . . . . . . . . 106
GPS . . . . . . . . . . . . . . 107
handsfree . . . . . . . . . 108
memory card. . . . . . . 109
messages . . . . . . . . . 110
pc applications. . . . . . 111
personalize . . . . . . . . 111
TTY . . . . . . . . . . . . . . 112
security . . . . . . . . . . . 112
vision impaired . . . . . . 90
customize. . . . . . . . . . . . 92
volume. . . . . . . . . . . . . 92
ring tones . . . . . . . . . . 92
wallpaper. . . . . . . . . . . 93
datebook . . . . . . . . . . . 94
hide or show
location information. . . 94
Privacy and Data
Security . . . . . . . . . . . . 134
Smart Practices
While Driving . . . . . . . . 135
calls. . . . . . . . . . . . . . . . . 96
turn off a call alert . . . . 96
recent calls . . . . . . . . . 96
redial . . . . . . . . . . . . . . 97
caller ID . . . . . . . . . . . . 97
call forward . . . . . . . . . 97
voice name . . . . . . . . . 98
emergency calls . . . . . 99
international calls. . . . 100
speed dial . . . . . . . . . 100
voicemail . . . . . . . . . . 100
Safety and General
Information . . . . . . . . . 116
Service & Repairs . . . . 121
Specific Absorption
index. . . . . . . . . . . . . . . 137
Rate Data . . . . . . . . . . . 122
contents
6
menu map
main menu
j
Multimedia
T
Games and Apps
•
•
Bluetooth
•
Audio Devices
•
•
•
•
•
•
•
•
Alarm Clock Plus
•
•
•
•
•
•
Shop
•
Pair to Devices
Device History
Setup
Music Player
PhotoEditor
iHelp
Media Center
Camera
•
•
•
Audio Player (Music Player)
Ring Tones
VoiceRecord
Find Me
Calculator Suite
City Drift
Java System
OpenSourceNotices
GPS
•
•
•
Position
Privacy
Interface
L
Contacts
•
[New Contact]
m
Tools
•
•
•
Datebook
E
Messages
My Info
•
[New Event]
•
•
•
•
•
•
•
[Create Message]
•
•
•
•
•
•
•
•
My Name
Line 1
Call Timers
Voice Mail
Inbox
•
•
•
•
•
•
Last Call
Phone Reset
Line 2
Drafts
Private ID
Group ID
Carrier IP
IP1 Address
IP2 Address
Phone Lifetime
Prvt/Grp Reset
Prvt/Grp Lifetime
Kbytes Reset
Sent Items
Fax Mail
Net Alert
1
B
p
Web
•
Memo
•
•
Profiles
u
Settings
(see next page)
Recent Calls
Push To Talk
•
•
•
•
•
•
•
•
•
•
•
•
[New Profile]
Standard
Car
•
Meeting
Office
Call Alert
This is the standard main menu layout. Your
phone’s menu may be a little different.
PT Manager
PTT Options
Outdoors
Headset
PRVT Only
CNTCS Only
Alarm Clock Plus
menu map
7
settings menu
Display/Info
Phone Calls
Voice Playback
•
Wallpaper
•
•
•
•
•
•
•
•
•
•
•
•
•
Set Line
•
•
•
•
Speak Text
•
•
Internal
External
Any Key Ans
Auto Redial
Call Waiting
Auto Ans
Flip Activation
Minute Beep
Call Duration
TTY
Hearing Aid
Notifications
DTMF Dialing
Call Forward
Speak Caller
Voice
Multimedia Volume
•
•
Text Size
Theme
Memory Card
•
•
•
•
Mike
•
•
•
•
Remove Card
Ruby
Store Media
Format Card
Help
Onyx
High Contrast
•
•
Home Icons
Backlight
Security
•
•
•
•
•
Phone Lock
•
Timer
Keypad Lock
SIM PIN
•
Java Timer
Sensor
•
Personalize
GPS PIN
Change Passwords
•
Logo Flash
PTT Backlight
•
•
•
•
•
•
•
•
•
•
Reorder Menu
•
Shortcuts
Up Key
•
•
Clock
Advanced
•
•
•
•
•
Display: On/Off
Screen Saver
Time Format
Date Format
Year
•
•
•
•
•
•
•
Alert Timeout
Down Key
Left Key
Right Key
Center Key
Left Softkey
Right Softkey
Power Up
Headset/Spkr
Connectivity
Reset Defaults
Return to Home
Transmitters
Phone Only
Menu View
•
•
•
Icon View
List View
Tab View
Connections
Volume
•
•
Bluetooth
•
•
•
•
•
Ringers/Alerts
•
•
Large Dialing: On/Off
Language
USB
Speaker
Earpiece
Multimedia
Keypad
•
•
•
•
•
Memory Card Access
Data Modem
Application Access
GPS NMEA
Help
menu map
8
Use and Care
Use and Care
To care for your Motorola phone, please keep it away from:
liquids of any kind
dust and dirt
Don’t expose your phone to
water, rain, extreme humidity,
sweat, or other moisture.
Don’t expose your phone to
dust, dirt, sand, food, or other
inappropriate materials.
extreme heat or cold
cleaning solutions
Avoid temperatures below
-10°C/14°F or above 45°C/113°F.
To clean your phone, use only a
dry soft cloth. Don’t use alcohol
or other cleaning solutions.
microwaves
the ground
Don’t try to dry your phone in a
microwave oven.
Don’t drop your phone.
Use and Care
9
essentials
Caution: Before using the phone for the first
time, read the Important Safety and Legal
Information located in the gray-edged pages
at the back of this guide.
2
Press the navigation key
Phone Calls, and press the center key
select it.
to scroll to
r
to
symbols
This means a feature is network/
subscription dependent and may
not be available in all areas. Contact
Telus Client Care for more
information.
about this guide
This guide shows how to locate a menu
feature as follows:
Find it:
M
>
u
>
Phone Calls
This means a feature requires an
optional accessory.
This means that, from the home screen:
1
Press the menu key
M
to open the Settings
menu.
essentials
10
activate your Mike
account
SIM card
insert the SIM card
Before you can begin using your handset, you
need to activate your Subscriber Identity
Module (SIM) card on The Mike Network.
Your SIM card holds the information required
to enable your handset to connect to The
Mike Network. It also stores your user
information, language preference and contact
list entries.
Turn off your phone and remove your battery
before you install or remove a SIM card.
Carefully slide the SIM card into your
phone,until it lies flat in the SIM card holder.
•
If you purchased your handset through
an Authorized Mike Dealer, your SIM
should already be active.
•
If you purchased your handset at
another location, follow the “Getting
Activated” instructions in the Mike
Services User’s Guide.
essentials
11
Warning: To avoid loss or damage, do not
remove your SIM card from your phone
unless absolutely necessary.
entering the PIN
You may be required to enter a SIM PIN when
you first use your handset.
When you receive your handset, the SIM PIN
is 0000. Change your PIN to prevent
fraudulent use of the SIM card. See
“security” on page 112.
SIM card security
Your SIM card stores all your Contacts
information. Since this information is stored
on your SIM card, not in your handset, you
can remove the information by removing your
SIM card.
1
When the Enter SIM PIN Code screen appears,
enter your SIM PIN. An asterisk appears
for each character entered.
Note: Except for making emergency calls,
your handset will not function without the
SIM card.
2
Press
-
under Ok.
Warning: If you enter your PIN incorrectly 5
times, your SIM card is blocked. To unblock
your SIM card, you must contact TELUS
Client Care.
To prevent unauthorized use of your handset,
your SIM card can be protected by a PIN that
you enter each time the handset is powered
on. You can change the PIN or turn off the
requirement that it be entered.
Note: Your PIN is set to OFF by default.
essentials
12
loaded in the phone to save or delete music,
images, videos, or audio files.
memory card
A memory card is a removable flash
memory card that you can use to store
pictures, videos, and audio files. The memory
card can be inserted in your phone or
connected to your computer using the
memory card reader.1
Find it:
M
>
u
>
Connections > USB
insert the memory card
1
Slide open the memory card slot cover.
Many types of pictures, videos, and audio
files stored on the memory card can be
viewed or played using your phone’s media
center. Music files can be played using the
music player.
You can connect your phone using a
Motorola data cable directly to your
computer, access the memory card
1. To order a memory card, memory card reader, or
memory card adaptor, log on to our Web site at
www.telusmobility.com or contact your Mike Dealer.
essentials
13
2
Slide in the memory card until it clicks into
place.
selecting the Remove Card option could result in
loss of data.
battery
Battery Use & Battery Safety
•
Motorola recommends you always
use Motorola-branded batteries and
chargers. The warranty does not cover
damage caused by non-Motorola
batteries and/or chargers.
Note: The first time you insert a memory card
in your phone, you will see the following
Caution: Use of an unqualified battery
or charger may present a risk of fire,
explosion, leakage, or other hazard.
Improper battery use, or use of a
damaged battery, may result in a fire,
explosion, or other hazard.
options: [Do Nothing] Go To Music Player, Go To Camera,
,
and Go To Media Center. Select the option of your
choice and continue.
Warning: Do not remove the memory card
before selecting the Remove Card option under
Settings. Removing the memory card before
•
Battery usage by children should be
supervised.
essentials
14
•
Important: Motorola mobile devices
are designed to work best with
qualified batteries. If you see a
message on your display such as Invalid
Battery or Unable to Charge, take the
following steps:
temperature. Never expose batteries to
temperatures below 0°C (32°F) or
above 45°C (113°F) when charging.
Always take your mobile device with
you when you leave your vehicle.
•
•
When storing your battery, keep it in a
cool, dry place.
•
Remove the battery and inspect it to
confirm that it bears a Motorola
“Original Equipment” hologram;
It is normal over time for battery life to
decrease, and for the battery to exhibit
shorter runtime between charges or
require more frequent or longer
charging times.
•
•
•
If there is no hologram, the battery
is not a qualified battery;
If there is a hologram, replace the
battery and retry charging it;
•
Avoid damage to battery and mobile
device. Do not disassemble, open,
crush, bend, deform, puncture, shred,
or submerge the battery or mobile
device. Avoid dropping the battery or
mobile device, especially on a hard
surface. If your battery or mobile
device has been subjected to such
damage, take it to a Motorola
If the message remains, contact a
Motorola Authorized Service Center.
•
•
New batteries or batteries stored for a
long time may take more time to
charge.
Charging precautions: When charging
your battery, keep it near room
essentials
15
Authorized Service Center before
using. Do not attempt to dry it with an
appliance or heat source, such as a hair
dryer or microwave oven.
battery installation
1
Slide the release button back until it
releases the battery door.
•
Use care when handling a charged
battery - particularly when placing it
inside a pocket, purse, or other
container with metal objects. Contact
with metal objects (e.g., jewelry, keys,
beaded chains) could complete an
electrical circuit (short circuit), causing
the battery to become very hot, which
could cause damage or injury.
2
3
Remove the battery door.
Promptly dispose of used batteries in
accordance with local regulations.
Contact your local recycling center for
proper battery disposal.
Push the battery down until it snaps in
place.
Warning: Never dispose of batteries in a fire
because they may explode.
essentials
16
When you charge the battery, the battery level
indicator at the upper right of the screen
shows charging progress. At least one
4
Replace the battery door and press it
gently until you hear a click.
segment of the indicator must be visible to
ensure full phone functionality while charging.
charge from your computer
You can partially charge your phone’s
battery by connecting a Motorola-approved
USB cable from your phone’s mini-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or bus-
powered USB hub). Typically, USB high-power
connectors are located directly on your
computer.
battery charging
New batteries are not fully charged.
charge using the charger
1
Pull out the
connector cover, and
insert the charger
into mini USB
connector on your
phone as shown.
Note: The phone will be charged at a slower
rate than it is charged with the rapid charger.
2
Plug the other end
of the charger into
Your computer must be turned on, and you
must have correct software drivers installed
on your computer. If the phone is off when
the appropriate electrical outlet.
essentials
17
the USB cable is connected between the
computer and the phone, the phone will
power up in charging mode. This mode allows
the phone to charge fastest and quickest.
overcharging. Of course, unplugging the
charger from the wall will avoid current drain.
turn it on & off
To turn on your phone,
Note: If the battery is very low, the phone will
not turn On, but will continue to charge at a
low rate. The phone will power up in charging
mode when the battery has been charged to
approximately 5% of its capacity. For faster
charging under a very low battery condition, it
is recommended to use the rapid charger
supplied with the handset.
press and hold
O
for a
few seconds or until the
display turns on. If
prompted, enter your
four-digit unlock code.
To turn off your phone,
press and hold
two seconds.
O
for
If the phone is turned on while charging from
a computer, it will not fully charge the battery.
In this case, the battery charge will be
Note: If you press the
O
for more than four
maintained approximately between 80% and
95% of the battery's capacity. Cables and
software drivers are available in Motorola
seconds, the handset will power “On” on
“transmitter off” mode. See “transmitters”
on page 86.
TM
Original data kits, sold separately.
Tip: Motorola batteries have circuitry that
protects the battery from damage from
essentials
18
3
If you want to answer the call using the
ear speaker, just open the flip and press
make a phone call
Enter a phone number and press
N
to make
N
. To hang up press
O
or close the flip.
a call or use of voice command. See“place a
call using voice name” on page 99.
Note: You must have the Flip Activation
feature On. See “advanced calling” on
page 103.
To hang up press
O
or close the flip.
Tip: For best performance avoid touching the
antenna with your fingers during the call.
If you are using a Bluetooth headset, you
can press the answer key on your
Bluetooth headtset. To hang up press the
same key on your Bluetooth.
answer a phone call
When your phone rings and/or vibrates, you
have the following options:
make a private call
With Mike’s Direct Connect service, you use
your phone as a long-range, digital 2-way radio
using one-to-one Private calls or one-to-many
group calls.
1
If you want to answer the call on speaker
phone, press the speaker key with
the flip closed. To hang up press the smart
key
t
.
.
Your Private ID is the number at which you
receive one-to-one Private calls.
essentials
19
to make a private call
The recipient has the following options:
1
Enter the Private ID you want to call.
Option
2
Press and hold the PTT button. Begin
talking after your phone emits a chirping
sound.
Answer: Begin a Private call with the sender.
Queue: Store the call alert to the call alert
queue.
3
Release the PTT button to listen.
Clear: Dismiss and delete the call alert.
To end the call press
O.
to send a call alert
Note: A Private call ends automatically if
there is no activity on the call for a few
seconds.
1
Enter the Private ID you want to call as
you would when making a Private call.
2
Press
-
under Alert.
send call alerts
Sending a call alert discretely lets the
recipient know that you want to talk to him or
her on a Private call.
When the message Ready To Alert appears on
the display, press the PTT button until the
message Alert Successful: appears.
When you send a call alert, the recipient’s
handset displays your name and emits a
series of beeps or vibrations.
answer a private call
1
When your phone emits a chirping sound
or vibrates to indicate you are receiving a
essentials
20
Private call, wait for the caller to finish
speaking.
or
3
Clear the call alert by pressing
-
under
2
3
Press and hold the PTT button and begin
talking after your phone emits a chirping
sound.
Clear.
store a phone number
or private ID
Release the PTT button to listen.
To end the call press
O.
You can store a phone number or private ID in
Contacts
:
answer a call alert
Find it:
M
>
L
>
[New Contact].
When you receive a call alert, you must
answer, queue, or clear it. You cannot receive
phone calls or Private calls until you do.
1
Enter a name for the new entry. Each
entry’s name can contain 20 characters.
to answer a call alert
2
3
Select a specific Ring Tone/Picture
Select a type for the entry (Mobile
Pager, or Other). To store a
private ID choose Private
Enter the number for the entry and press
under Save when done.
.
1
Press the PTT button to start a Private call
with the sender.
,
Work1,
Work2 Home, Fax,
,
.
or
4
2
Queue the call allert by pressing
-
under
-
Queue
.
essentials
21
Tip: Before saving the entry, you can save
more information. You can add a picture,
choose a special ringer, store an Email
address, an IP address, assign a Group, and
more. You can also create Contact entries that
are groups of Private IDs called Group IDs.
Search Option. If you select Full Name Search, a
new window will appear to allow you to
type the name of the contact you are
looking for. If you select First Letter Search,
your handset will find the nearest match
to the letter you enter.
After you have saved the number, the new
Contacts entry is displayed.
2
3
If the Contacts entry contains more than
one number, scroll left or right until the
type of the number you want to call is
displayed (Mobile Private, Work1, Work2, Home,
,
call a stored phone
number or private ID
etc.).
If you chose a phone number, press
call the entry.
N
to
Shortcut: From the home screen press
-
under Contcs
.
or
or
If you chose a Private ID, or a Talkgroup ID,
press and hold the PTT button to call the
number.
Find it:
M
>
L
1
Scroll to the Contacts entry.
Tip: If the Contacts entry you scrolled to
contains a Private ID, you can make an instant
Private call to that Private ID by pressing and
Tip: You can set up your handset for two
different search options by pressing
M
>
essentials
22
holding the PTT button, even if the Private ID
is not the type of number displayed.
set it up
Before you begin using text messaging, you
may need to set up your signature, service
center number, and expiration information.
find your phone number
and Private ID
Shortcut: From the home screen press
-
under Msgs Text Msg
>
[Create Message]
>
M
>
Find it:
Tip: Want to see your phone number or
Private ID while you’re on a call? Press
M
>
m
>
My Info.
Setup
.
or
M
>
Find it:
M
>
E
>
M
>
Text Msg Setup.
My Info
.
The following options become available:
text messages
option
Signature: Enter your signature (up to 11
characters long).
Text messaging allows you send and receive
short text messages to and from other Mike
handsets. Messages you receive appear on
your handset’s display and in the text
message inbox.
Delivery Report: Set it to On if you wish to
receive a report once the message has
been delivered.
essentials
23
option
option
Srvc Cntr No: Enter the phone number of your
service center. If you do not know this
number, contact your service provider.
Quick Notes: Are short, pre-written text
messages that you can create, edit, and
send in your text messages. You can store
up to 20 quick notes. A quick note may be
up to 30 characters long.
Expire After: This is the amount of time
messages you send are saved at the
service center if they cannot be delivered.
After this period, they are discarded.
Select Quick Notes to create a [New Note] or
press
-
under Edit to change the pre-
written quick notes.
Auto Clean Up: Set this option to On if you want
your phone to delete sent messages.
Press
you entered.
-
under Done to save the information
If you set Auto Clean Up to On, select Clean Up After
to set the number of days after which sent
messages are deleted or the number of
messages to be kept.
receive a text message
1
To view the message press
To dismiss the message notification press
under Back
-
under Read.
2
-
.
Note: If your phone is powered off when you
receive a text message, your phone notifies
essentials
24
you the next time you power it on. If you are
out of your coverage area, your phone alerts
you when you return to your coverage area.
calling the sender, or storing the sender’s
number in Contacts, press
M
.
create and send text messages
Tip: While reading a text and numeric
message that contains a phone number, you
1
From the home screen press
-
under
can press
S
to call that number.
Msgs
>
[Create Message] [Create Text Msg].
>
or
read from the message center
Select Inbox > Text Msg Inbox, or Sent Items Text
>
1
From the home screen press
-
under
Msg Outbox, or Drafts
>
Text Msg Drafts.
Msgs
>
Inbox Text Msg Inbox.
>
or
2
Select the message you want to read or
press the number of the message you
want to read. If the message fills more
than one screen, scroll to read it.
You can also create a text message from
the Inbox
,
Outbox or Drafts.
2
To address the message use the keypad
to enter the phone number of the person
you want to send the message to and
Tip: Scrolling through one message lets
you view the next message.
press
r
or press
-
under Contcs, or press
3
To reply to the message, press
Reply or to see all other choices, including
forwarding and deleting the message,
-
under
M
>
Recent Calls. Select the number you
want.
essentials
25
3
Select Msg: and enter the text of the
message or to use a quick note press
under Browse and scroll to the quick note
2
To edit the fields you want to change,
follow step 2 through step 5 in “create
and send text messages” above.
-
you want.
resend text messages
4
Press
M
>
Set Send Method and select Text
,
Fax, x400, Paging, Email, ERMES, or Voice.
Shortcut: From the home screen press
-
under Msgs
>
Sent Items Text Msg Outbox.
>
5
If you want to send the message, press
under Send or to delete the message
without sending it, press under Cancel
-
1
Scroll to the message you want to resend
or press the number of the message you
want to resend.
-
.
Note: If you want to request confirmation
of delivery press
M
>
Delivery Report
>
On.
2
Press
s
>
Resend.
use drafts
delete sent text messages
When you save a message as a draft, it is
saved in the drafts folder.
Shortcut: From the home screen press
-
under Msgs
>
Sent Items Text Msg Outbox.
>
Shortcut: From the home screen press
under Msgs
-
1
2
3
Scroll to the message you want to delete.
>
Drafts Text Msg Drafts.
>
Press
Press
-
-
under Delete
.
1
Select the draft you want to edit. You also
have the choice to create new text
messages from this menu.
under Yes to confirm.
essentials
26
delete all unlocked sent messages
Shortcut: From the home screen press
Shortcut: From the home screen press
-
under Msgs Text Msg Setup Inbox Mem Mtr.
>
M
>
>
-
under Msgs
>
Sent Items
>
Text Msg Outbox.
To view the amount of memory available in
your text sent items:
1
2
Press
Press
M
>
Delete All.
Shortcut: From the home screen press
under Msgs
Mtr
-
-
under Yes to confirm.
>
M
>
Text Msg Setup Outbox Mem
>
manage memory
.
Your text inbox, sent items, and drafts folder
have a set amount of memory available for
storing messages.
To view the amount of memory available in
your drafts folder:
Shortcut: From the home screen press
-
The text inbox holds 100 messages. If the text
inbox is full, you cannot receive messages
until you delete some.
under Msgs Text Msg Setup Draft Mem Mtr.
>
M
>
>
use your phone as
USB mass storage
device
The sent items and drafts folder hold 100
messages each. If the sent items and drafts
folder memory is full, you cannot send
messages or save drafts until you delete
some.
Find it:
Card Access
M
>
u
>
Connections
>
USB Memory
>
To view the amount of memory available in
your text inbox:
essentials
27
1
Slide open the
use your phone as a
modem
You can use your phone as a modem (Packet
Data only) with a laptop, handheld device, or
desktop computer. Circuit Data is not
supported. In order to use your handset as a
modem, you must create either a wired or
wireless connection between your handset
and the other device.
connector cover, and
insert the USB data
cable into the mini
USB connector on
your phone as shown.
2
3
Connect the other end
of the USB cable to
the USB port of the
computer.
Your memory card can now be accessed
by your computer.
To connect your phone wirelessly, you must
have a Bluetooth adapter for the other device.
To create a wired connection, use a USB
cable.
Note: If you want to purchase and use
additional memory cards, Transflash and
MicroSD memory cards are compatible with
your handset, and available at
connect with a USB Cable
www.telusmobility.com or your local Mike
Dealer.
use a USB cable to connect your handset to a
laptop, handheld device, or desktop
computer:
essentials
28
1
2
Pull out the connector
cover, and insert the
USB cable into the
mini USB connector
on your phone as
shown.
When used as a modem, your handset is
enabled for Data Modem transfer mode, which is
used for small file transfers such as email.
Note: To use these services, you must install
the iDEN Wireless Data Services software
(available separately). For more information on
setting up your computer and your handset
for packet data calls, contact TELUS Client
Care.
Insert the data plug
into the data port of
the other device.
connect via
Bluetooth
Use your handset as a modem via Bluetooth.
The laptop, handheld device, or desktop
computer you want to connect to must have a
Bluetooth adapter installed.
Check that the adapter is properly installed,
and then follow the specific instructions
outlined in the device’s user guide to connect
the device to your handset.
essentials
29
main attractions
You can send details of the podcast to a friend
and send feedback to the podcast creator
using MMS messages.
music player
Your phone includes a music player that you
can use to play music files stored in the Music
directory on the memory card inserted in your
phone.
Audio files supported by the music player
include:
Format
Bit Rate
Sampling
Rate
The music player groups the music files into
folders and lists. When you select a music file
to play, the music player plays this file, then
plays the other music files grouped with it.
AAC
.m4a, .aac
Up to
320kbps
Up to
48 kHz
AAC+
.m4a, .aac
Up to
128 kbps
Up to
48 kHz
The music player also plays podcasts you
download to your computer and then save on
the Podcast directory on your phone’s
memory card. You can mark highlights within
a podcast file to help you find the parts you
most want to listen to.
(16 to 128
kbps)
MP3
.mp3
Up to
320kbps
Up to
48 kHz
main attractions
31
filename rules
When naming files stored on the memory
card, the following rules apply:
Format
Bit Rate
Sampling
Rate
WMA v9 L2
WMA v3, v7, v8
.wma
Up to
320 kbps
Up to
48 kHz
•
The filename can only contain ASCII
characters.
•
The filename can be up to 32
characters long, including the file
extension.
understanding the folder
structure
When you first insert the memory card into
Warning: If a music file name is longer than
32 characters, including the file format (.MP3),
the song will not be visible on the player and
therefore can not be played. This can be
corrected by renaming the file and replacing it
on the card.
your phone, five folders are created: Audio
,
Image Music,
,
Podcast, and Video. In order to view
files stored on the memory card, you must
store the given file in its corresponding format
folder: audio files such as ring tones, and
voice recordings to the Audio folder, pictures to
the Images folder, music files such as songs to
the Music folder, Podcasts to the Podcast folder
and videos to the Video folder.
play music files
Find it:
M
>
j
>
Audio Player.
1
Scroll to a folder.
main attractions
32
Tip: The Songs folder contains all the
music files on the memory card in a single
list.
play music while loading files
The first time the music player finds music
files on your memory card, it loads and
organizes these files. This may take a long
time for a large number of files.
2
To play the first music file in the folder,
press
-
under Play. (If the selected folder
contains subfolders, this plays the first
music file in the first of the subfolders.)
To play music while files are loading:
Find it:
M
>
j
>
Audio Player
.
Press
Scroll to a music file and press
Play, or scroll to a folder and press
under Play to play the first music file in it.
r
to view the folder’s contents.
1
1
Press
-
under View
.
-
under
-
Scroll through songs and folders while
loading is going on the background.
Any time you are viewing a list of folders with
the music player, you can scroll to a folder and
2
Scroll to a music file or folder and press
-
under Play or
r.
press
-
under Play to start playing the
contents of that folder or press
the contents of the folder.
r
to view
To stop viewing a folder and return to the
folder or list that contains it, press under
-
Back
.
main attractions
33
The following options become available
through the navigation panel:
The music player can be set up with the
following options:
option
Option
Pause and Resume
Repeat: lets you set the music player to play
one or all the music files in a list or folder
repeatedly. While in the music player press
Press
press
-
-
under Pause or
under Play or
r
to pause, and
r
to resume playing
M
>
Setup
>
Repeat
>
All or One.
paused music files.
Skip to Next or Previous
Press and release
the next or previous music file. (Do not hold
the left side of the navigation key.)
Shuffle: lets you set the music player to play
the music files in a list or folder in random
right or left to skip to
order. While in the music player press
M
>
Setup
>
Shuffle:
>
On or Off.
Visuals lets you customize the look of the
music player background screen by
choosing a theme or by viewing visuals.
Fast Forward and Rewind
Press and hold
to fast forward or to rewind.
right or left for 2 seconds
While in the music player press
M
>
Setup
>
Visuals
>
On or Off.
set up the music player
Find it:
M
>
j
>
Audio Player
>
M
>
Setup
main attractions
34
Option
Option
3D Music lets you experience surround
effects. While in the music player
Use Bluetooth lets you route the audio
from the music player to a wireless
press
M
>
Setup
>
3D Music
.
Bluetooth stereo headset. Additionally the
handset can be connected to a Bluetooth
Home Stereo Adapter to stream content
from your home entertainment system and
listen wirelessly from your headset
If you set the 3D Music feature to On, you can
select a 3D effect from the list of Music
Reverbs
.
Equalizer lets you customize the sound of the
music player when the handset is tethered
to a stereo headset. While in the music
withouth missing a call. While in the music
player press
M
>
Setup
>
Use Bluetooth.
player press
the mode you want.
M
>
Setup Equalizer, and select
>
work with playlists
Playlists are lists of music files you create
from the files already available through the
music player.
Playlists enable you to organize music files,
but they do not change anything in other
folders or on the memory card. Adding or
deleting a file on a playlist does not copy,
delete or move it.
main attractions
35
create a playlist
Find it:
4
When you are finished selecting files,
press under Done and under Save.
-
-
M
>
j
>
Audio Player
>
Playlists [Create
>
New]
.
The following options are available for existing
playlists:
1
Enter a playlist name.
option
Note: If you do not assign a name, the
playlist is named Playlist followed by a
number. For example, the first playlist you
create without naming is automatically
Edit a Playlist
After you create a playlist, you can change
its name, add music files, remove music
files, and change the order of the music
files in Music Player
Make changes and press
named Playlist-1
.
2
3
Select [Add Songs]
.
>
Playlists >
M
under Save
>
Edit Playlist
.
-
.
A list of all music files on the memory
card appears.
Reorder Songs in a Playlist
You can change the order of the music files
while creating or editing the playlist in Music
Player
Reorder Songs. Scroll to the song you want to
move and press under Grab; then scroll to
the place where you want the song to
appear and press under Insert
Tip: For options to help you sort through
this list, press
M.
>
Playlists > M
>
Edit Playlist
>
M
>
Select each file you want on the playlist. A
checkmark appears by each selected file.
-
Tip: To deselect a selected item, scroll to
a selected file and press
r.
-
.
main attractions
36
option
option
Remove Songs
Delete a Playlist
You can remove some or all music files
while creating or editing a playlist.
While in the music player select Playlists.
Scroll to the playlist you want to delete and
press Delete Playlist. Press under Yes
to confirm.
M
>
-
Before you have saved a new playlist or
while editing a playlist, press
M
and scroll
Delete all Playlists
to the song you want to remove and press
M
>
Remove Song and press
r
-
, or you can
under Yes to
While in the music player select Playlists
Press Delete All Playlists and press Yes
under to confirm.
.
select Remove All Songs: press
confirm and
M
>
-
-
under Save.
Reorder Playlists
Note: This deletes all playlists except the
You can change the order of the playlists in
the Playlists folder. Press
Reorder Playlists. Scroll to the playlist you want
to move and press under Grab; then scroll
to the place where you want the playlist to
appear and press under Insert
Favorites playlist.
M
>
Edit playlist
>
use the favorites playlist
-
The Favorites playlist is a permanent playlist. You
can Add To Favorites, remove and change the
order of the music files, but you cannot
rename or delete music files.
-
.
Find it:
M
>
j
>
Audio Player
>
Songs.
main attractions
37
Select the song you want to add to your
favorites and press
podcast. To play the podcast, press Play
After you begin playing the podcast,
.
M
>
Add To Favorites.
pressing
podcast.
r
pauses and resumes the
work with podcasts
•
If the podcast you are playing contains
highlights, pressing and releasing the
Find it:
M
>
j
>
Music Player
>
Podcasts.
Note: The Podcasts folder is empty until you
download podcasts from your computer.
right or left
r
skips to the next or
previous highlight within the podcast,
or to the beginning or end of the
podcast.
1
Scroll to view individual podcast episodes
or folders containing multiple episodes of
the same program.
highlights
2
Press
r
to view the podcast episodes
Highlights are portions of a podcast that are
marked to help you find them more easily.
Some podcasts you download may already
have highlights marked. You can use the
music player to add and delete highlight
markers. Press and release (don’t hold) the
right or left to find them.
within a folder or the details screen of an
individual podcast episode.
You can pause, resume, fast-forward, and
rewind just as with any other music file.
Some functions differ when playing a podcast:
•
Pressing
r
when you have scrolled
to a podcast displays a screen showing
podcast details, but does not play the
main attractions
38
You can play all the highlights in a podcast and
skip everything that is not marked as a
an MMS message that the person can save
and download onto their computer.
highlight using Highlights Only
.
If played on a phone with a music player, like
yours, they will see any highlight markers
created within the podcast.
add a highlight marker
1
While playing a Podcast press
M
>
Add
Find it:
Forward Details
M
>
>
j
>
Send.
Audio Player
>
Podcasts
>
M
>
Highlights
.
2
3
Press
-
under On to mark the beginning.
Note: If the podcast has no highlights, this
option will not be displayed.
Go to the point in the podcast that you
want to mark as the end of the highlight
and press
-
under Off.
background music
Your phone has the capability to play music in
the background while you are acessing other
4
Press
-
under Back
.
Tip: Highlight markers can be deleted by
pressing Clear or pressing
Clear All Highlights from the
M
>
M
>
Edit
features like Settings
,
Media Center
,
Bluetooth, GPS,
Highlights
>
M
>
Contacts MMS Datebook
,
,
,
Memo Recent Calls, and
,
Podcasts menu.
others.
send podcast information
If you want to share a podcast you have
saved to your memory card, you can send it in
You can also enjoy listening to your favorite
background music while browsing the web,
reading news or checking the weather.
main attractions
39
play music in the background
Find it: Audio Player Songs
•
•
•
Musical ring tones in the list of ring
tones
M
>
j>
>
.
Audio recordings saved from MMS
messages received
1
Select a music file and press
the song.
rto play
Audio recordings downloaded to your
phone
2
Press
M
>
Hide Player.
The music player continues playing and the
handset returns to the home screen. To jump
Because the memory card inserted in your
phone may contain files saved to it using a
device other than your phone, not all types of
pictures, videos, and audio recordings on the
memory card may be accessed through your
phone’s media center.
back to the music player, press
-
under Player.
media center
The media center lets you access pictures,
videos, and audio recordings stored in your
phone’s memory or in the Audio, Image and
Video folders on a memory card inserted in
your phone’s memory card slot.
Items in the media center can be sent in
MMS messages and with Bluetooth. See
“MMS” on page 55 and “bluetooth®” on
page 74.
The following audio recordings can be
accessed through the media center:
Pictures in the media center can be sent in
Private calls using Send via PTT. See “PTV
features” on page 47.
•
Voice records
main attractions
40
Media files supported by the Media Center
include:
Format
Bit Rate
Sampling
Rate
Up to 128 kbps
(16 to 128 kbps)
Up to
48 kHz
Format
Bit Rate
Sampling
Rate
Enhanced
AAC+
.aac, .m4a,
.3ga, .mp4
4.75 kbps – 12.20
kbps (supports all
3GPP specified
rates)
AMR-NB
.amr, .3gp,
.3ga, .mp4
Up to 320kbps
Up to 1536kbps
Up to
MP3
.mp3,
.mpga
48 kHz
6.6 kbps - 23.85
Kbps(supportsall
3GPP specified
rates)
8 kHz
AMR-WB
.awb, .3ga,
.3gp
Up to
48 kHz
8-bit
Linear
PCM
Up to 320kbps
16 kHz
AAC
.waw, .au
(MPEG4
AAC-LC)
.aac , .3gp,
.m4a, .3ga,
.mp4
Up to 1536 kbps
Up to 704 kbps
Up to 48 kHz
(8, 11.05, 12,
16,22,24,3,44,
48 kHz)
16-bit
Linear
PCM
.waw, .au
Up to
48 kHz
Up to 128 kbps
(16 to 128 kbps)
Max: 48 kHz
8-bit A-
law PCM
.waw, .au
AAC+
.aac, m4a,
.3ga, .mp4
main attractions
41
Format
Bit Rate
Sampling
Rate
Format
Bit Rate
Sampling
Rate
Up to 704 kbps
Up to 44 kHz
(8, 11.05, 12,
16, 22,44 kHz)
1 – 3.5 kHz
Monophonic
N/A
8-bit mu-
law PCM
.waw, .au
iMelody
.imy
Supported video file formats include:
Up to 320 kbps
48 kHz
WMA v9
L2 (also
WMA v3,
v7, v8)
Format
Extension
MPEG4 + AMR-NB
MPEG4 + AMR-WB
.mp4, .3gp
.mp4, .3gp
.mp4, .3gp
.wma
MPEG4 + AAC / AAC+ /
Enhanced AAC+
N/A
N/A
N/A
N/A
Stand
MIDI
.mid, .midi,
H.263 + AMR-NB
H.263 + AMR-WB
.3gp
.3gp
.3gp
.smf
XMF MIDI
.xmf, .mmf,
.xmf0,
H.263 + AAC / AAC+ /
Enhanced AAC+
.xmf1,
.mxmf
main attractions
42
Note: If you insert a memory card into the
phone now, you are prompted to save the
picture you have just captured to the memory
card. Choosing to save the picture to the
memory card does not change your storage
preferences after the picture is saved.
camera
The 1.3 MP camera with a digital, external
viewfinder in your phone, takes pictures and
records videos. You can save these pictures
and videos in your phone’s memory or to a
memory card inserted in your phone’s
memory card slot, depending on the storage
preference you chose. You can access these
saved pictures and videos through the media
center.
To save the picture, press
To discard the picture without saving it, press
under Discard
From the camera viewfinder, you can press
to enter Menu Options
r.
-
.
M
.
You can send the pictures you take either in
Private calls or with Bluetooth. You can also
assign them to Contacts entries, or set them
as your phone’s wallpaper.
access the camera
There are many ways to access the camera.
The simplest way is to press
To take pictures aim the camera lens on the
flip and press under Capture or press
e.
-
r.
main attractions
43
The following options become available:
option
option
Self Timer
Record Video
Delay capturing the picture for a selected
number of seconds. The values are: Off
Recording a video is similar to taking a
picture. If you store videos in phone
memory, you can record videos up to 60
seconds long. If you record video onto the
memory card, the video length is limited by
how much memory is available on the card
or one 2 hours.
(default), 10 seconds, 15 seconds, 20 seconds
.
To turn off the timer before the picture is
captured, press
-
under Cancel.
Picture Quality
Adjust the picture quality to Normal or Fine
.
Picture Size
Zoom
Set up the picture size to Max, Xlarge, Large,
Medium, Small, Wallpaper1, or Wallpaper2. You can
also set picture size from the viewfinder by
Set the zoom to 1x, 2x, or 4x. You can also set
zoom from the viewfinder by pressing
up and down.
pressing
left and right.
Spotlight Setting
Turn on the spothlight ON before taking a
picture in low light conditions. Set it up to
be Always On or Off
.
main attractions
44
pictures with crop, resize, flip and color
adjustment tools. You can also add graphics
and text to your pictures.
digital viewfinder
The external digital
viewfinder allows you
to take self-portraits
withconvenienceand
accuracy compared
to a mirror.
Find it:
M
>
j
>
Media Center.
1
2
Select the picture you want to edit.
Press
or
M
>
Edit.
To take self-portraits
press
e
, close the
Find it:
M
>
T
>
PhotoEditor.
flip and press the
change storage preference
You can choose whether media items are
saved to your phone’s memory or to the
memory card. From the camera viewfinder
speaker phone key to
capture the picture.
When you finish
taking pictures, press
the smart
.
key to exit the self-portrait
press
Select On Phone or Prefer On Card
The location that you choose becomes the
Store Media option in Settings
M
>
Memory Card
>
Store Media.
camera mode.
1
.
photo editor
Your phone comes with a photo editing Java
application that allows you to edit your
.
main attractions
45
access the media center
customize the camera
You can access the media center from the
The Camera Setup menu lets you customize the
camera as follows:
camera at any time by pressing
M
>
Media
Center, except when you are using the Camera
Setup menu or viewing the memory screen.
option
Ask for Name
Press
M
>
Media Center.
If this option is On, you are prompted to
enter a name for each picture before saving.
Otherwise, pictures are automatically saved
with the date and a number as their names.
The media center contains all your pictures,
music and video files located on your phone’s
memory or your removeable memory card.
Use the
*
or the
#
to filter your results.
Shutter Sound
Set the default sound for the Shutter Sound
.
Spotlight Setting
Select Always On or Off, depending on the
lighting condition.
Default Size
Sets the default value for the Picture Size
option.
main attractions
46
You can choose to send messages, pictures,
events, My Info, contacts or location
information to the Private ID you are engaged
in a Private call with, Private IDs on the Recent
option
Default Quality
Sets the default value for the Picture Quality
option.
Calls list, and Private IDs stored in Contacts
.
When you make or receive a Private call, your
phone automatically determines whether the
phone you are engaged in a Private call with is
able to receive each of these items. Your
phone saves this information for as long as
the Private ID is on your Recent Calls list or is
saved in your Contacts. Your phone updates the
saved information each time you make or
receive a call to or from that Private ID.
PTV features
Push to View (PTV) lets you exchange
the following items through Private calls
with other phones that have this capability:
•
•
•
•
•
•
Short text messages1
Pictures1
Datebook events
My Info
You can turn your phone’s ability to send and
receive messages, pictures, events or
location information On and Off.
Contact information
Location information1
Note: You cannot send PTT feature items
during Talkgroup calls.
1. Additional charges may apply.
main attractions
47
begin a message from the contacts or
the recent calls list
send messages
The Push to View Messages feature lets
you send short text messages through
Private calls.
1
From the Contacts or the Recent Calls list,
select the entry containing the Private ID
you want to send the message to.
When you send a message, it appears on the
display of the phone you are engaged in the
Private call with. After the call, the message
appears in the Recent Calls list of that phone.
2
Press
M
>
Use PTT Feature
>
Send Message.
begin a message from the PT Manager
The PT Manager lets you select the Private ID
you want to send the message to from Contacts
or the Recent Calls list.
begin a message and choose a
recipient
You can begin a message during a Private call,
Find it:
M
>
p
>
PT Manager
>
Send Message.
Then select A Contact or A Recent Call to see a list
of entries from the Contacts or the Recent Calls list
that can receive messages.
from the Contacts list, the Recent Calls list, or from
the PT Manager
begin a message during a private call
While in a Private call, press Use PTT Feature
.
create messages
After you have begun a message and chosen
a recipient, a screen appears that lets you
create the text of the message you want to
M
>
>
Send Message.
main attractions
48
send. Your message may be up to 400
characters long.
reply to a message
1
2
3
View the message.
Press under Reply
You can choose from a list of ready-made
words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it
before you send it. Editing a Quick Note
changes the Quick Note for this message only
and will not change the Quick Note on the list.
-
.
Create the message and push the PTT
button to send it.
send pictures
You can send pictures stored in the Media
Center through Private calls. The picture
you send appears on the Private call
recipient’s display.
send a completed message
After you have completed your message,
press the PTT button to send it.
If the recipient accepts the picture, their
phone saves the picture. The picture then
appears in that phone’s recent call list.
receive messages
When you receive a message, a message
notification appears on the display.
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
To view the message: Press
-
under Read
under
.
To dismiss the message press
-
Dismiss
.
main attractions
49
2
3
4
Select the picture you want to send.
Press
Select A Contact or A Recent Call
send a picture during a call
M
>
Send Via...
>
Send Via PTT
.
1
While in a Private call, press
-
under
Picture or press
M
>
Use PTT Feature
>
Send
Picture.
A list of contacts that have Private IDs and
are able to receive pictures appears.
A list of pictures that can be included in a
Private call appears.
5
Select the name of the person you want
to send the picture to.
2
3
4
Select the picture you want to send.
Press the PTT button to send the picture.
6
7
Press the PTT button to send the picture.
Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
When prompted, press the PTT button to
resume the Private call.
from the PT manager:
Find it:
5
When prompted, press the PTT button to
resume the Private call.
M
>
p> PT Manager
>
Send Picture.
1
Select A Contact or A Recent Call
start a call by sending a picture
A list of contacts that have Private IDs and
are able to receive pictures appears.
from the media center
2
Select the name of the person you want
to send the picture to.
Find it:
M
>
j> Media Center
1
Scroll left or right to Media: Pictures
main attractions
50
3
4
5
Select Browse Picture or Capture Picture.
clear a picture from the display
Press the PTT button to send the picture.
If you want to clear a picture from your
phone’s display while still on a call, press
M
>
Once picture has been sent, when
prompted press the PTT button to resume
the call.
Clear Screen
.
The picture will not appear on the display
again the next time you receive a call from
person who sent it. This does not delete the
receive a picture
picture from My Pictures
.
When someone sends you a picture, your
phone emits a tone or vibrates and a message
appears asking if you want to accept the
picture.
send My Info
1
2
While in a Private Call press
Info via PTT, and push the PTT button to
send.
M
>
Send My
Pictures you receive are saved to your phone’s
memory or a memory card. They are
accessible through the media center.
or
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
From the home screen press
Send My Info via PTT and push
the PTT button to send.
M
>
m
>
My Info >
M
>
Tip: If you want to stop the transmission
before it is finished, press
E.
main attractions
51
set my info sending option
You can control what portion of the
information in My Info is sent and
whether it is sent automatically in every call or
only when you choose to send it.
1
2
Select On or Off
When you make a call in which your
information is sent automatically, the
name you entered in the My Name field of
My Info appears on the display of the
recipient’s phone, even if your name and
Private ID are not stored in the recipient’s
Contacts.
Find it:
M
Info to Send
>
p> PT Manager
>
Configure
>
PTT
My Info
>
1
Select or remove the fields you want to
send.
send contact information
2
Press
-
under Done.
1
2
3
While in a Private Call press
M
>
Use PTT
Feature
.
The information your phone sends always
includes My Name and Private. You may also send
Select Send Contact and select the contact
information you want to send.
Line 1 Line 2, and Carrier IP, depending on your
,
sending options.
Push the PTT button to send.
or
automatic sending
To control whether you send your information
automatically:
1
From the home screen press
PT Manager > Send Contact.
M
>
p
>
Find it:
M
Auto Send
>
p> PT Manager
>
Configure
>
PTT
My Info
>
main attractions
52
2
Enter the Private ID number of the person
you want to send the Contact information
A list of contacts that have Private IDs and
are able to receive pictures appears.
to or press
-
under Browse
.
2
3
Select the name of the person you want
to send your location to.
3
Select from Recent Calls
,
Contacts, or Memo.
4
Select the contact information you want
to send and push the PTT button.
Press the PTT button to send your
location.
Note: The location information can be stored
in the recipient’s recent call list.
send your location
You can transfer your approximate
location information through Private
calls to other enabled phones. Using the
integrated GPS feature the following location
information can be shared:
turn PTT features on and off
You can turn your phone’s ability to send and
receive messages, pictures, and Datebook
events on and off.
•
•
Time Stamped Latitude/Longitude
You cannot turn your phone’s ability to send
and receive My Info and contact information
on and off.
Relative Location or Direction and
distance from the sender in Miles or
Kilometers
Find it:
M
>
p
>
PT Manager
>
PTT Options > On/
Find it:
M
>
p
>
PT Manager
>
Send Location.
Off PTT Features.
1
Select A Contact or A Recent Call.
main attractions
53
4
Check or uncheck Messages, Pictures
Events and/or Location.
option
Assigned Number
Call a Private ID you assign. Enter the
one touch PTT
number using your keypad, or press
under Search. Select Contacts
Memo
-
,
Recent Calls, or
Find it:
M
>
p> PTT Options
>
One Touch PTT.
.
One Touch PTT sets your phone to do any of
the following each time you press the PTT
button from the home screen
If you are entering a Talkgroup number,
press before the number.
#
PT Manager
option
Go to PT Manager. See “PT manager” on
page 55.
Off
Nothing happens when you press the PTT
button from the home screen.
Send Event
Go to the first screen to send a Datebook
event.
Last Call
Call the most recent Private ID or Group on
the recent calls list.
Send Message
Go to the first screen to send a message.
See “send messages” on page 48.
main attractions
54
M
>
p
>
PT Manager
Select Send Message, Send Picture, Send Event
My Info Send Contact or Send Location. After
option
1
,
Send
Send Picture
,
Go to the first screen to send pictures. See
“send pictures” on page 49.
choosing what PTT item you are sending,
select a contact and press the PTT button
to send.
Send My Info
Go to the first screen to send My Info.
or
Send Contact
2
Select Configure to configure your PTT Quick
Notes
On/Off PTT Features
,
PTT My Info, PTT Location, One Touch PTT, or
Go to the first screen to send a contact.
.
Send Location
Go to the first screen to send your location.
See “send your location” on page 53.
MMS
Multimedia Messaging Service (MMS) lets
you send and receive messages that may
include text, pictures, videos, and audio
recordings.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu.
Your phone supports MOSMS as well as
MMS. You should see no significant
differences between the two; some names of
You can also set the One Touch PTT feature
from the PT Manager.
main attractions
55
menu items and the steps you take to access
features may differ.
Tip: To remove a phone number or email
address from the list of message recipients,
scroll to the phone number or email address
create a message
Shortcut: From the home screen press
and press
When you are finished addressing the
message, press under Back
To enter or edit the body of the message:
-
under Remove.
-
-
.
under Msgs
>
[Create Message]
>
[Create MMS Msg].
or
1
2
Select Message
.
Find it:
MMS Msg]
M
.
>
Messages
>
[Create Message]
>
[Create
Enter text using the keypad or press
under QNotes to select a quick note of your
choice (see “quick notes” on page 58)
-
Note: You can also create a message from
Recent Calls, or the home screen.
Contacts
,
and press
r.
To address the message:
1
2
Select To:
more message options
To view more message fields in a message
you are creating, select ...More...
Add the phone number or email address.
or
3
Select from Contacts or Recent Calls
.
4
Press
r.
main attractions
56
The following options become available:
option
option
Report
Subject
Set receipt confirmation On Delivery
.
Create or edit the subject line.
Valid Until
Attach
Set a date after which attempts to deliver
the message end. Or press
-
under No Date.
Attach a picture, audio file, video or voice
record.
reply to a message
Cc
You can reply to a message while you are
viewing it, or while a previously viewed
message is highlighted in the message
center. You cannot reply to unread messages.
Send a copy of this message to someone
else.
Auto Replies
Allows you to create a list of possible short
answers for the recipient to choose when
replying to your message.
To reply to a message:
1
2
View the message you want to reply to.
To reply to the sender only, press Reply or
Priority
Reply All
.
Set priority Normal or High
.
main attractions
57
3
A list of short phrases appears. Select any
of these phrases to add it to your
insert a picture, video, and
audio recording from the media
center
You can insert one or more pictures, videos,
and audio recordings from the media center
into the body of the message. You can include
text in the body of your message in addition
to these items.
messages or select [Create Reply]
.
4
Edit any message fields you want to
change.
5
Press
-
under Send.
quick notes
When you are filling in the Message and Subject
message fields, you can add ready-made
words or short phrases called Quick Notes.
After you add these words or phrases, you
can edit them as you would any other text.
insert items
While you are filling in the Message field, press
M
and select Insert QuickNotes
Audio, Insert Video Capture Video, Capture Picture or Record
Voice
,
Insert Picture, Insert
,
.
1
While you are creating a message, scroll
to or select Message or Subject
.
A list of available pictures, videos, and audio
recordings appears.
2
3
Press under QNotes.
-
Select the picture, video, or audio recording
you want to insert.
Select the quick note you want to insert
into the message.
main attractions
58
Tip: To view or listen to the item before
inserting it, highlight it and press Preview
3
Select the picture, video, or audio
recording you want to attach.
.
Tip: To view or listen to the item before
remove an inserted item
To remove an item from the message you are
attaching it, highlight it and press
under Preview
-
.
creating, highlight it and press
-
under Delete.
If you want to attach more items, select
[New Attachment]
.
attach a picture, video, and
audio recording from the media
center
4
When you are finished, press
-
under
Done
.
take a new picture
You can attach one or more pictures, videos,
and audio recordings from the media center.
1
While you are creating a message, scroll
to any message field and press or
select Attach
M
1
When you are filling in the message,
>
[New Attachment].
select Attach
Select Browse Pictures
Audio Record Voice
>
[New Attachment]
.
2
Select Capture Picture. This accesses the
camera.
2
,
Capture Picture, Browse
,
,
Browse Video, or Record Video
.
Tip: If you want to adjust the zoom,
spotlight, picture quality, picture size, or a
timer, set these options before taking the
picture.
A list of available pictures, videos, and
audio recordings appears.
main attractions
59
3
Take the picture. For instructions on how
to take pictures, see “camera” on
page 43.
To view the video without saving it, press
Review
.
3
To save the video, press
To discard the video without saving it,
press Discard
e
or press
r.
4
When you have captured the picture you
want, press Save. This will automatically
save it to your media center and attaches
it to your message.
.
4
The picture is attached to the message
and saved to the default storage location.
To discard the picture, press
-
under
Discard. You can then take another picture.
create a new voice record
You can create a new voice record to send
with a message:
5
When you are finished, press under
-
Done
.
The picture is attached to the message
and saved to the default storage location.
1
2
3
Press
M
or select Attach
>
[New Attachment].
Select Record Voice
.
record a video
You can record a video to send with a
message:
Say the message you want to record into
the microphone.
4
When you are finished recording, press
r.
1
2
Select Attach
>
[New Attachment].
Record and adjust video.
main attractions
60
5
When you are finished, press
-
under
You can continue to create the message. The
version you saved in the MMS drafts folder
will not change.
Done
.
The voice record is attached to the message
and saved to the media center and the list of
voice records.
send a draft
Shortcut: From the home screen press
under Msgs
-
remove an attachment
>
Drafts MMS Drafts.
>
To remove an attachment in a message you
are creating:
1
2
Select the draft you want to send.
Press under Send.
-
1
2
Select Attach.
Note: If Send does not show as an option,
you might need to complete required
fields in the message in order to send it.
Scroll to the attachment you want to
remove.
3
Press
M
>
Unattach.
edit a draft
drafts
Shortcut: From the home screen press
-
under Msgs
>
Drafts
>
MMS Drafts.
While you are composing a message, you can
save it in the MMS drafts folder by pressing
1
2
Select the draft you want to edit.
Press
M
>
Save In Drafts.
r
.
main attractions
61
3
Make editions if you wish, select the
recipient and press under Send
delete a draft
When you send a draft, it is removed from the
MMS drafts folder.
-
.
resend
1
To delete a message in the MMS drafts
folder without sending it, scroll to the
If a message was not sent from your handset,
you can resend it.
message you want to delete and press
under Delete
-
Shortcut: From the home screen press
under Msgs
-
.
>
Outbox MMS Outbox.
>
2
Press under Yes to confirm.
-
1
2
Scroll to the message you want to resend.
Press under Resend
MMS outbox
-
.
MMS messages you have sent or tried to
send are stored in the MSS Outbox.
Note: If your message was sent successfully,
Resend will not appear as an option.
forward items from the outbox
check delivery status
Shortcut: From the home screen press
under Msgs
-
If a message was successfully sent and you
set the message to give a report confirming
delivery, you can check the delivery status:
>
Outbox MMS Outbox.
>
1
Scroll to the message you want to
forward.
Shortcut: From the home screen press
under Msgs
-
>
Outbox MMS Outbox.
>
2
Press
M
>
Forward.
main attractions
62
1
2
Scroll to the message you want to view.
Press
3
If the message fills more than one screen,
scroll to read it.
M
>
Delivery Status.
embedded objects and
attachments
Messages may contain pictures, videos, or
audio recordings as part of the body of the
message or as attachments.
delete a message
1
2
3
Scroll to the message you want to delete.
Press
Press
M
>
Delete Message.
-
under Yes to confirm.
If a message contains pictures, videos, or
audio recordings in the body of the message,
highlight each picture, video, or audio
recording to view or play it.
receive a message
When you receive an MMS message, a
message notification appears on the display.
1
To view the message press
r
.
If a message contains a picture, video, or
audio recording as an attachment, open the
attachment to view the picture or play the
video or audio recording.
If your phone is set to download new
messages automatically, the message
downloads from the message server now.
2
If your phone is set prompt you before
open attachments
To open an attachment:
downloading new messages, press
M.
1
View the message.
main attractions
63
2
3
Highlight the attachment you want to
open. Attachments appear at the end of a
message.
2
Press
confirm.
-
under Delete and
-
under Yes to
forward a message
Press
r.
1
Press
M
>
Forward.
Note: Attachments that are of an unknown
type cannot be opened, but they can be
deleted.
2
Create and send your message.
Embedded objects and attachments are
included when you forward a message.
view received messages from
the message center
lock and unlock messages
Locked messages cannot be deleted until you
unlock them.
Shortcut: From the home screen press
under Msgs
-
>
Inbox MMS Inbox.
>
1
View the message you want to lock or
unlock.
Select the message. If the message has not
yet been downloaded from the message
server, it is downloaded now.
2
Press
M
>
Lock Message or Unlock Message.
delete unread messages
call a number in a message
1
Scroll to the message you want to delete.
If a message you receive contains a phone
number, Private ID, or Talkgroup ID in the From
main attractions
64
field, the To field, the Cc field, the Subject line, or
the body of the message, you can call or send
a call alert to that number.
store message information to
contacts
If a message you receive contains a phone
number, Private ID, Talkgroup ID, or an email
address in the From field, the To field, the Cc
field, the Subject line, or the body of the
message, you can store this information to
Contacts.
send a call alert
1
View the message.
2
Highlight the Private ID or Talkgroup ID
you want to alert.
1
2
View the message.
3
Press
M
>
Alert.
Highlight the number or email address
you want to save.
4
Push the PTT button.
make a group call
3
Press
To store the number or email address as a
new entry, select [New Contact]
M
>
Save Number or Save Email.
1
2
3
View the message.
4
.
Press
M
.
To store the number or email address to
an existing entry, select the entry.
Highlight the Talkgroup ID you want to
call.
5
With the Contacts type field highlighted,
4
Select Talkgroup
.
press
left or right to display the
5
Push the PTT button.
main attractions
65
Contacts type you want to assign the
number or email address.
A slide show may contain a series of pictures
that display in sequence. It may also include
one or more audio recordings.
6
Press
-
under Save.
When you view a message containing a slide
go to a website
show, this icon
i
appears.
If a message contains one or more website
URLs, you can go to that website.
view a slide show in a message
1
2
3
View the message.
1
2
View the message.
Highlight the slide show and press
r.
Highlight the website URL you want to go
to.
To speed up the slide show, press
right or down.
3
Press
M
>
Go To Website.
4
To repeat the part of the slide show you
have just viewed, press left or up.
Note: The entire URL must appear in the
message to allow you to open the
website.
5
To view the slide show again, press
under Restart
-
.
Tip: You can create and send MMS messages
view a slide show
Your handset can receive MMS messages
containing slide shows.
containing slide shows on
www.telusmobility.com
.
main attractions
66
save an embedded picture,
video, or audio recording
delete an embedded picture,
video, or audio recording
To save a picture, video, or audio recording
that is part of the body of a message you
receive:
To delete a picture, video, or audio recording
that is part of the body of a message you
receive:
1
2
View the message.
1
2
View the message.
Highlight the picture, video, or audio
recording you want to save.
Highlight the picture, video, or audio
recording you want to delete and press
M
.
3
Press
M.
3
Select Delete Picture
,
Delete Video, or Delete Audio
.
4
Select Save Picture Save Video, or Save Audio.
,
The item will save in the default storage
location.
save attachments
1
View the message.
Note: Some types of pictures, videos, and
audio recordings can be viewed or played,
but not saved.
2
Highlight the attachment you want to
save.
3
Press
M
>
Save Attachment.
main attractions
67
Selected items save to the default storage
location.
save audio
1
View the slide show.
Press Save Audio.
Note: Some types of pictures, videos, and
audio recordings can be viewed or played,
but not saved.
2
M
>
If the slide show contains more than one
audio recording, a list of the audio
recordings appears. Select the audio
recording you want to save.
delete attachments
1
View the message.
2
Highlight the attachment you want to
delete.
message transmission
After you start to send a message you have
created or start to download a message you
have been sent, you can still stop the
3
Press
Press
M
>
Delete Attachment.
4
- under Yes to confirm.
message transmission from being completed:
save a picture
With the flip is closed, press the smart key on
the top .. Opening or closing the flip does
not interrupt message transmission.
1
View the slide show.
2
When the picture you want to save
appears, press
M
>
Save Picture.
main attractions
68
customize MMS
option
Shortcut: From the home screen press
-
Quick Notes: Lets you create new Quick Notes
and edit or delete Quick Notes you have
created.
under Msgs
>
M
>
MMS Setup.
or
Replies: Lets you create new reply phrases
and edit or delete reply phrases you have
created.
Find it:
M
>
g
>
M
>
MMS Setup.
This option is available from many context-
sensitive menus when you are using MMS.
Download Options: Controls whether your phone
automatically downloads new messages
when they arrive, or only after you respond
to a prompt or read the message from the
Inbox. Set this option to Automatic if you want
your phone to download new messages
automatically; set the option to Manual if you
want your phone to prompt you before
downloading new messages.
The following options become available:
option
Friendly Name: Enter text here to create a
friendly name. Your friendly name is the
name displayed in the From field on other
iDEN handsets when they receive
messages from you.
Signature: Enter text here to create a
signature. Your signature is text that is
automatically inserted at the end of all
messages you create. You can edit the text
before sending the message.
Cleanup: Controls how long messages remain
in the Inbox and Outbox before they are
deleted.
main attractions
69
3
Edit the text and press
r.
new quick notes and reply
phrases
Note: These Quick Notes are not the same as
the quick notes used with MOSMS
messages. Each messaging service has its
own quick notes feature.
delete only Quick Notes and reply
phrases you have created
1
From the MMS Setup menu, select Quick
Notes or Replies
.
2
Scroll to the Quick Note or reply phrase
you want to delete.
create quick notes
1
From the MMS Setup menu, select Quick
Notes or Replies
3
Press
Press
-
-
under Delete
.
.
4
under Yes to confirm.
2
3
Select [New QuickNote] or [New Reply].
delete all Quick Notes or all reply
phrases you have created
Enter text from the keypad and press
r.
1
From the MMS Setup menu, select Quick
Notes or Replies
edit quick notes
You can edit only Quick Notes and reply
phrases you have created.
.
2
3
Press
Press
M
>
Delete All.
1
From the MMS Setup menu, select Quick
Notes or Replies
-
under Yes to confirm.
.
2
Select the Quick Note or reply phrase you
want to edit.
main attractions
70
cleanup options
option
The cleanup option controls how long
5 Messages: If you have more than 5
messages, messages are deleted in the
order they were received, starting with the
oldest, until 5 are left.
messages remain in the Inbox and Sent Itmes
before they are deleted. You set the cleanup
option for the Inbox and Outbox separately.
10 Messages: If you have more than 10
messages, messages are deleted in the
order they were received, starting with the
oldest, until 10 are left.
The cleanup option deletes only read,
unlocked messages.
Shortcut: From the home screen press
-
under Msgs
>
M
>
MMS Setup > Cleanup.
With these options, messages are deleted
in the order they were received, starting
with the oldest, until the selected number
are left.
or
Find it:
M
>
g
>
M
>
MMS Setup > Cleanup.
1
Select Inbox or Outbox
.
1 Day: Messages are deleted if they are older
than 1 day.
Choose a clean up option from the following
list:
3 Days: Messages are deleted if they are
older than 3 days.
option
Off: Messages are never automatically
deleted.
With these options, messages are deleted
when you exit the message center after
setting the option.
main attractions
71
Mike’s wireless web
services
option
Custom: Lets you create a clean-up option of
up to 99 messages or 99 days. for the inbox
Your handset is equipped with a
microbrowser that can be used to access
Mike's Wireless Web Services and other up-
to-the-minute information. You can view
specially designed text versions of popular
Internet sites that provide news, sports,
weather, entertainment, stock quote sites,
and other useful information.
2
Press
-
under Yes to automatically delete
messages now or press
delete messages later.
-
under No to
delete all messages
To delete all read, unlocked messages from
the MMS Inbox, all messages in the MMS
drafts folder, or all successfully sent
messages in the MMS Outbox:
access the microbrowser
The first time you use the microbrowser, you
will be required to go through a security setup
process that takes approximately one to three
minutes. Please follow the on-screen prompts
to complete the security setup process. This
setup process will only occur the first time
you use the service.
1
2
3
4
5
Press
Select Inbox
Select MMS Inbox
M
>
g.
,
Drafts or Outbox
.
,
MMS Drafts, or MMS Outbox.
Press
Press
M
>
Delete All.
-
under Yes to confirm.
Find it:
M
>
1
>
Browser
main attractions
72
1
Once connected, the Homepage (or the
last page visited) will be displayed. To
access the Home menu page from any
other menu in the microbrowser, press
*
0
Asterisk/Back key - press to return to
the previous page viewed
before the current page.
0/+ Next key - press after using
the back key to return to the
original page viewed.
S
.
To view additional text while visiting a site,
use the navigation key
it.
to scroll to read
access the browser menu
1
Press and hold
menu.
M
to access the browser
navigate the microbrowser
When you use the microbrowser, some keys
on your handset operate differently than
during a normal phone call. These keys are
explained below:
2
3
Scroll to select the desired option.
Press under Ok to initiate the option.
-
option
E
Home key - press to return to the
default Home page (the page
first seen when you launch the
browser). Press and hold for
two seconds to exit the
browser.
Exit Browser - closes the browser and returns
you to the idle screen. Use this option
when you want to return to the page
currently viewed at a later time, without
navigating through the entire menu
structure again.
main attractions
73
customize your microbrowser
option
Reload - reloads the current Wireless Web
page viewed, refreshing the information
with the most current from the information
provider.
You can adjust the size of the display and the
font in your microbrowser.
Find it:
M
>
1
>
Browser >
M
>
Preferences
>
Look & Feel.
Home - returns you to your default Home
page, the first page you see when launching
the microbrowser.
1
To adjust the size of the display, select
Screen width and check one of the pixel
options.
Bookmarks - allows you to access bookmarks
you have created using the Bookmark
option.
2
To adjust the size of the font, select Font
Size and check one of the size options.
Mark Site - identifies sites you would like to
visit easily and quickly from your
microbrowser.
end the microbrowser session
At any point in the session, press and hold
for two seconds to exit the microbrowser.
E
About Phone.com - contains information about
the version of the Phone.com browser
loaded on your handset.
®
bluetooth
Advanced Options - helps troubleshoot any
service issues you may have with your
browser.
Your phone supports the use of wireless
Bluetooth stereo headsets. The audio from
the audio player is routed to the stereo
main attractions
74
headset. Additionally the handset can be
connected to a Bluetooth Home Stereo
Adapter to stream content from your home
entertainment system and listen wirelessly
from your headset withouth missing a call.
2
3
Select Name if you wish to assign a name
to your handset.
Select Find Me Duration to determine the
amount of time in which your handset can
be found by other Bluetooth devices.
All stereo audio includes ring tones, music
and Java sound.
Tip: You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
Find it:
M
>
m
>
Bluetooth.
The Bluetooth connection menu contains an
option to search for Audio Devices including
stereo Bluetooth devices.
make a Bluetooth connection
connect your phone with a Bluetooth
headset
turn Bluetooth On or Off
You can turn your phone’s Bluetooth feature
on or off. While Bluetooth power is on, your
phone can communicate with other devices.
Find it:
[Look for Devices].
M
>
m
>
Bluetooth
>
Audio Devices
>
1
2
Follow the instructions on your Bluetooth
headset to set it up to be found.
Find it:
M
>
m
>
Bluetooth
>
Setup Power.
>
Once your Bluetooth headset is set to be
1
Select On to power Bluetooth On.
found press
r
on your handset. Your
phone will scan the Bluetooth headset
main attractions
75
until it finds it. Press
the name of the Bluetooth headset on
your screen.
r
when you see
Note: This model offers bluetooth auto pair
feature with auto pair compatible Motorola
devices. When bonded via bluetooth with a
certain device, the pin will not be required.
3
Your phone requires that you create a
bond in order to connect with a Bluetooth
connect your phone with another
device using Bluetooth
headset. Press
prompted to bond with the headset.
-
under Yes when you are
Find it:
M
>
m
>
Bluetooth Pair To Devices.
>
4
Enter the Bluetooth pass key.
1
Select the device you want from the list of
found devices on your screen.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate
this information.
2
Create a bond if you are prompted to do
so.
Tip: If you have previously connected to a
device, the device will be stored on your
phone so you can connect with it easily.
If a device ships without a Bluetooth PIN,
then you can enter any PIN for that
device. To establish a connection to that
device, enter the same PIN for both your
phone and the device. For example, if you
enter 1234 as the device’s PIN, then enter
1234 as your phone’s PIN.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
5
Press
-
under Ok.
main attractions
76
Note: If the Audio Devices list contains only one
device, then your phone will automatically try
to connect to that device.
send Contacts
Shortcut: From the home screen press
under Contcs.
-
1
2
While in a call, press
M
>
Use Bluetooth.
1
2
3
Select the contact you want to send.
Press under Yes to power On
-
Press
M
>
Send Via... > Bluetooth.
Bluetooth.
Press
-
under Yes to power On
3
Select the audio device you want to
connect to from the list of Handsfree Devices
Bluetooth.
.
4
Select the device you want to transfer the
contact information to.
send information via Bluetooth
or
You can use your phone to send Contacts
entries, Datebook events, or audio files,
pictures, and videos in the media center to
another Bluetooth device.
Search for the device by selecting [Look for
Devices]
.
5
If prompted, bond with the device.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect
with yours.
Your phone connects with the devices and
transfers the contact.
send a Datebook event
Note: Files sent or received may be up to
6 MB.
Find it:
M
>
m
>
Datebook
main attractions
77
1
2
Select the datebook event you want to
send.
Search for the device by selecting [Look for
Devices]
.
Press
M
>
Send Via... > Bluetooth
.
5
If prompted, bond with the device.
If the event you select repeats, then you
will be prompted to choose whether to
send the selected instance of the event or
all instances of the event.
Your phone connects with the device and
sends the datebook event.
send audio files, pictures, and videos
Note: Note: You can only send audio files,
pictures, and videos if they are not forward
locked and if their DRM settings do not
prevent you from sending.
To send only the selected instance of the
event, select This Event Only
.
or
To send all instances of the event, select
Find it:
M
>
j
>
Media Center
Repeat Events
.
1
Select the audio file, picture, or video you
want to send.
3
Press
-
under Yes to power On
Bluetooth.
2
3
Press
M
>
Send Via... > Bluetooth.
4
Select the device you want to transfer the
contact information to.
Select the device you want to transfer the
contact information to.
or
or
main attractions
78
Search for the device by selecting [Look for
clock screen saver
Devices]
.
Your phone comes with a clock screen saver
that shows the time and day of the month
through the external display when the phone
is in power save mode.
4
If prompted, bond with the device.
Your phone connects with the device and
sends the datebook event.
When a key is pressed the screen saver is
removed and the display lights up.
Find it:
Saver.
M
>
u
>
Display/Info
>
Clock
>
Screen
You can choose from five different clock
styles:
External Clock 3
External Clock 2
External Clock 1
12
9
3
2:11pm
21
21
6
External Clock 5
External Clock 4
12
9
3
21
21
6
main attractions
79
basics
See page 1 for a basic phone diagram.
status indicators
Status indicators are shown at the top of the
home screen:
display
The home screen shows when you turn on
3.
5.
6. 7.
1. 2.
4.
the phone. To dial a number from the home
TELUS
4/25/07
screen, press number keys and
N.
Note: Your home screen may look different.
04
05pm
TELUS
4/25/07
Date
Contcs
Msgs
Time
04
1
Signal Strength Indicator: Vertical bars
show the strength of the network
05pm
connection. You can’t make or receive
Left Soft
Key Label
Right Soft
Key Label
calls when
1
or
0
shows.
Soft key labels show the current soft key
functions. For soft key locations, see page 1.
basics
80
2
3
Active Phone Line: 1 indicates phone line
1 is ready to make calls; 2 indicates phone
line 2 is ready to make calls.
main menu
All your phone’s features can be accessed
through the main menu. You can set the main
Speaker On/Off: Sounds associated with
Private calls and group calls can be set to
come through the earpiece rather than
through the speaker.
menu to appear as List View
,
Icon View, or as Tab
View
.
Find it:
M
>
u
>
Display/Info
>
Menu View
.
4
5
6
Ringer Vibe/On: Your phone is set to not
ring.
text entry
Some features let you enter text.
Message Indicator: Shows when you
receive a text message.
Your phone provides convenient ways to enter
words, letters, punctuation, and numbers
whenever you are prompted to enter text (for
example, when adding a Contacts entry or
when using Text Messaging).
Packet Data: Your handset is ready to
transfer packet data or is transferring
packet data when it shows a blinking
arrow.
7
Battery Charge Indicator: A fuller battery
change the character input mode
indicates a greater charge. Recharge the
1
When you see a screen where you can
enter text, press to change the
character input method.
battery when your phone shows Low Battery
.
M
basics
81
2
Select one of the following options:
text message service such as concatenated
SMS, the page counter is also displayed.
entry modes
Alpha
Word
Press a key several times for
different characters.
word method
The Word English text input method lets you
enter text into your phone by pressing keys
just once per letter.
Enter words using a predictive
text entering system that lets
you enter a word with fewer
keypresses.
The Word English text input method
combines the groups of letters found on each
phone key with a fast-access dictionary of
words, and recognizes what you want to text
as you type. It first offers the most commonly-
used word for the key sequence you enter
and lets you access other choices with one or
Symbols
Numeric
Enter symbols.
Enter numbers by pressing the
numbers on the keypad.
Language Select the language in which you
want to write the text.
more presses of the
0
key.
Tip: When entering text, press
display the text counter. The maximum
letters you can type on one message depends
on the language. The i877 supports up to 765
letters in English. If your carrier provides long
*
to
enter a word using ”word” method
character input
1
Select the Word character input method.
2
Press the corresponding keys once per
letter to enter a word (for example, to
basics
82
enter the word Bill, press 2455).
(If you make a mistake, press to erase
to
and
5
three times again. If you make a
*
mistake, press Delete to erase a single
character. Press and hold Delete to erase an
entire word.)
a single character. Press and hold
delete an entire entry.)
*
3
To accept a word and insert a space,
press
By default, the first letter of an entry is
capitalized and the following letters are
lowercased. After a character is entered, the
cursor automatically advances to the next
space after two seconds or when you enter a
character on a different key.
#
.
To accept a word completion (such as
Billion when you entered Bill), press
right.
If you get a word you don’t want, you can
press the key to see more word
choices and pick the one you want.
Characters scroll in the following order:
0
characters
1
2
3
4
5
6
7
. ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥
A B C 2 Á Ã Â À Ç
D E F 3 É Ê È
alpha method
To enter characters by tapping the keypad:
1
Select the Alpha mode.
G H I 4 Í Ì
2
Press the corresponding keys repeatedly
until the desired letter appears. (For
J K L 5
M N O 6 Ó Õ Ô Ò
P Q R S 7 ß
example, to enter the word Bill, press
2
twice, three times, three times,
4
5
basics
83
handsfree speaker
You can use your phone’s handsfree speaker
to make calls without holding the phone to
your ear.
characters
8
9
0
#
*
T U V 8 Ú Ü Û Ù
W X Y Z 9
+ - 0 * / \ [ ] = > < # §
Space
During a call (with the flip open), press
under Speaker to turn the handsfree speaker
On.
-
Back
The handsfree speaker stays on until you
navigation key
press
-
under Speaker or close the flip.
Press the navigation key
up, down, left, or right
to scroll to items in the
display. When you scroll
to highlight the desired
Note: The handsfree speaker won’t work
when your phone is connected to a handsfree
car kit or headset.
item, press
r.
basics
84
codes & passwords
lock & unlock phone
The Security menu lets you turn security
features on and off and change passwords.
See “security” on page 112.
Phone Lock - Turns on a feature that locks your
phone: Lock Now takes effect immediately; Auto
Lock takes effect when your phone is powered
off and then on. An unlock code is required to
enable this feature, to unlock the phone, and
to set a new unlock code. Contact your
option
SIM PIN - Enables and disables your phone’s
SIM PIN security feature.
service provider for your default unlock code.
GPS PIN - Enables and disables your phone’s
GPS PIN security feature.
Keypad Lock - Locks the phone’s keypad, either
immediately or automatically after a set period
of inactivity.
Change Passwords - Changes your phone unlock
code, security code, SIM PIN, and GPS PIN.
Note: You can make emergency calls on a
locked phone (see page 99). A locked phone
still rings or vibrates for incoming calls or
messages, but you need to unlock it to
answer.
basics
85
Note: No serial port connectivity is provided
by your phone. Applications on the host
device which are expecting to receive the
GPS location information via a serial port must
instead use a Virtual Serial Comm Port.
transmitters
Note: Consult airline staff about the use of
the Transmitters Off feature during flight. Turn
off your phone whenever instructed to do so
by airline staff.
The data sent to the host device is formatted
as prescribed in the National Marine
Electronics Association 0183 V3.0 (NMEA-
0183) standard. As such it supports the
following sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
Transmitters Off mode turns off your phone’s
calling features in situations where wireless
phone use is prohibited, but you can use the
phone’s other non-calling features when
transmitters is turned Off.
Find it:
M
>
u
>
Advanced > Transmitters > Off.
This handset is not a full NMEA-0183
compliant device supporting electrical RS-422/
RS-232 connectivity as dictated by the NMEA-
0183 standard. Consequently it's unsuitable
for conventional marine NMEA-0183
equipment use. Its intended use is for normal
"terrestrial" mobile users who want to enable
their USB hosting computing devices such as
a PC, laptop or PDA with the phone's highly-
capable GPS functionality.
use GPS with map
software
Your phone is enabled with a highly-capable
GPS receiver that sends location information
to a USB port on a PC, laptop, or PDA.
basics
86
•
•
Stop bits: 1
get connected
Flow control: None.
1
Slide open the phone's bottom
connector and insert a mini-USB cable
into the phone's bottom connector.
4
Start the GPS application on your host
device. Set the GPS application to start
accepting NMEA-0183 formatted data
from the created Virtual COMM port.
2
Insert the other end of the mini-USB cable
into a vacant USB receptacle of your host
device. A virtual USB Comm Port will be
created on your host device upon
successful enumeration of the phone as a
USB Communications Device Class
device.
5
Set your phone to start sending NMEA-
0183 formatted location information.
Find it:
USB.
M
>
m
>
GPS > Interface > NMEA OUT >
Your phone is now actively sending location
NMEA-0183 formatted GPS data to your USB
host device.
3
Ensure no application in your host device
is using the created COMM port. You
may need to ensure that the created
virtual COMM port settings are set as
follows:
To stop your phone from sending location
data:
•
•
•
Bits per second: 4800
Data bits: 8
Find it:
Off.
M
>
m
>
GPS > Interface > NMEA OUT >
Note: Each time you power your phone Off,
NMEA OUT is automatically set to Off and
Parity: None
basics
87
you need to manually restart it using the
menu selections above.
optimize your handset position and
orientation
While in a phone call slide your phone up and
down, then left and right until best
microphone coupling is obtained. You also
may need to adjust your hearing aid (HA)
volume setting.
Your USB host device will generally provide
charging power (5V, up to 500mA) to your
phone via the mini-USB cable therefore no
other charging power to it will normally be
required. However some laptops may require
that you provide external AC/DC power to the
laptop in order for it to provide full 500mA
charging current capability to the phone.
features for the hearing
impaired
If your HA has a telecoil, activate its switch,
then also rotate the handset as illustrated to
align the telecoils.
using your phone with a
hearing aid
For best results use the following optimization
procedures and handset setting. They
generally apply as well for users with cochlear
implants:
Note: Some automatically switched hearing
aids may need an auxiliary switching magnet.
basics
88
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
positions when the handset is in the optimum
orientation.
choose your hearing aid setting
Find it:
M
> Settings > Phone Calls > Hearing Aid.
Approximate telecoil location is within
6-13 mm of this location.
1
Set this option to Microphone. Microphone
coupling is now optimized.
Off - Shut off
M - Microphone
T - Telecoil
or
2
Set this option to Telecoil. Handset meets
US federal requirements for telecoil
coupling sound.
Approximate telecoil location is just
above the battery.
or
3
Set this option to Off (factory default). This
is the setting for non HA users.
optimize your handset antenna
position
Your phone’s rating for HA compatibility is
determined with the antenna extended if it
has an extendable antenna. However,
acceptable use might occur with the antenna
retracted. Test your handset in both antenna
basics
89
Note: When you access the home
screen, you will hear “Home”
features for the vision
impaired
•
•
•
Main menu options as you scroll
through the main menu
voice playback
A prompt indicating that your phone is
placing a call
The Voice Playback feature allows you to use a
simulated voice to guide you through phone
menus and through placing and receiving
phone calls.
The name of incoming callers rather
than a ring tone
Find it:
M
>
u
>
Voice Playback.
You can hear the following as you use your
phone:
1
2
3
4
Select Speak Text
playback.
>
On for the navigation
•
•
The number keys you have pressed
Select Speak Caller
phone number of incoming callers
>
On to hear the name or
The names, numbers, and contact
types of each contact entry as you
scroll through Contacts
Select Voice and choose either a female
voice (Barbara) or male voice (Simon).
•
The status information on the Home
screen, such as signal strength, battery
level, date and time, and service status
Select Multimedia Volume and press the
volume keys up or down to adjust the
volume of voice playback.
basics
90
high contrast theme
Your phone comes with a standard high
contrast theme that provides black and white
text with reverse text highlighting and very
large icons for easy visualization of selection.
Find it:
M
>
u
>
Display/Info
>
Theme
>
High
Contrast
.
basics
91
customize
Note: Only ring tones stored in your phone’s
memory are available in the ring tones list. To
assign a ring tone stored on a memory card
inserted in your phone’s memory card slot,
you must go to the media center. Ring tones
purchased or received from TELUS can be
assigned as ring tones. Other audio files may
not be supported as ring tones.
volume
Press the volume
keys to:
•
•
•
turn off an
incoming call alert
change the
earpiece volume during calls
Find it:
M
>
j
>
Ring Tones
change the ringer volume from the
home screen
1
2
Make sure Vibrate All is set to Off
.
Scroll through the list of ring tones and
select the one you want to assign. Vibrate
sets your phone to vibrate instead of
making a sound; Silent sets your phone to
neither vibrate nor make a sound.
ring tones
To set the ring tone your phone makes when
you receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT
or Datebook reminders:
Tip: Highlighting a ring tone lets you hear it.
customize
92
3
Select the features you want to assign the
ring tone to.
2
3
Select Vibrate from the list of ring tones.
Select the features you want to set to
make no sound.
4
When you are finished, press
-
under
Done
.
4
When you are finished, press
Done.
-
under
Note: This icon
M
appears on the display if
you set your phone to neither vibrate nor
make a sound for phone calls.
wallpaper
setting your phone to vibrate
Set a previously saved photo or picture as a
wallpaper (background) image in your phone’s
external display, internal screen or throughout
all menu screens.
You can set your phone to vibrate instead of
making a sound when you receive all phone
calls, Private calls, group calls, call alerts,
messages notifications, pictures sent using
Send via PTT, and Datebook reminders.
Find it:
M
>
u
>
Display/Info
>
Wallpaper.
1
2
Select External
Scroll through the list of pictures and
press to select the picture of your
choice.
Press
Select Internal
Find it:
M
>
j
>
Ring Tones
>
Vibrate All > On.
To set your phone to vibrate instead of making
a sound for some features but not others:
r
Find it:
M
>
j
>
Ring Tones.
3
-
under Back
.
1
Make sure Vibrate All is set to Off
.
4
>
Placement
customize
93
If you want the wallpaper in the home
screen only select Idle Only; if you want the
wallpaper to show throughout all the
Daily Begin - Sets the beginning of your day. This
is the earliest time of day displayed in week
view, if you have a 12-hour day view.
menu screen, select Throughout
.
Delete After - Sets the amount of time Datebook
Note: You can set the internal and external
wallpapers to change automatically after a
certain period of time by turning on the Auto
Cycle feature located in the Wallpaper menu. If
you set this feature to On, you can choose the
pictures you want to appear randomly.
waits to delete an event after it occurs.
Time Shift - Lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
Alert Timeout - Sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
datebook
Clock - Controls whether the time and date
appear on the home screen; sets time and
date format; sets year.
Find it:
M
>
m
>
Datebook
>
M
>
Setup.
You can view or change these options:
Start View - Sets Datebook to start in day view,
week view, or month view when you access
Datebook.
hide or show
location information
Your phone is equipped with a Location
feature for use in connection with location-
customize
94
based services that may be available in the
future.
Select from the following options:
option
The Location feature allows the network to
detect your position. Turning Location off will
hide your location from everyone except 911.
Restricted: No Java or similar software
applications may view the location of your
phone. However, location information may
still be available to the phone’s owner, fleet
manager, or account administrator.
Note: Turning Location on will allow the
network to detect your position using GPS
technology, making some applications and
services easier to use. Turning Location off
will disable the GPS location function for all
purposes except 911, but will not hide your
general location based on the cell site serving
your call. No application or service may use
your location without your request or
permission. GPS-enhanced 911 is not
available in all areas.
Unrestricted: All applications may view the
location of your phone, without notifying
you.
By Permission: When an application attempts
to view the location of your phone, you will
be prompted to give permission. However,
location information may still be available to
the phone’s owner, fleet manager, or
account administrator.
set your privacy options
Find it:
M
>
m
>
GPS Privacy.
>
customize
95
calls
To make and answer calls, see page 19.
•
•
•
•
short text messages received
pictures sent or received
turn off a call alert
You can press the volume keys to turn off a
call alert before answering the call.
Datebook events received
Location information received
The recent calls list displays up to 20 of the
most recent calls and call alerts.
recent calls
The recent calls list contains information
associated with calls you have made and
received and call alerts you have received.
1
2
Press
M
>
Recent Calls
.
Scroll through the list.
store an item to contacts from
recent calls
Phone calls, Private calls, My Info, Contacts or
Location entries received from other phones
can be stored to the Contacts list from the
Recent Calls list.
When you send or receive Private calls, the
recent call list contains the following PTV
items with those calls:
•
•
contact information received
My Info received
calls
96
Find it:
M
>
Recent Calls.
caller ID
1
Scroll to or select the item you want to
store.
Caller ID allows people to identify a caller
before answering the phone by displaying the
number of the incoming call. If you do not
want your number displayed when you make
a call, just follow these easy steps.
2
Press
-
under Save to store the
information as a new entry in the
Contacts list.
or
To block your phone number from being
displayed for a specific outgoing call:
3
Select an existing contact and update the
information.
1
2
3
Press *67
Enter the number you want to call.
Press
.
4
Press
-
under Save to save your changes.
N
.
redial
To permanently block your number, call your
TELUS Client Care.
To redial your last outgoing call, press and
hold or push the PTT button if it was a
private call.
N
call forward
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
calls
97
different numbers depending on the reason
you missed the call. You can forward phone
lines 1 and 2 independently.
change your detailed call forwarding,
remember to reset the forwarding back to
your access number or your phone number.
Find it:
M
>
u
>
Phone Calls > Call Forward.
voice name
You can place calls by speaking comands to
your phone if you have previously assigned a
voice name to your contacts.
1
To forward all calls select All Calls and select
To to enter the phone number you want all
your calls forwarded to.
or
2
You can specify a forwarding number for
each type of missed call by selecting
Detailed and chosing the following options:
assign voice names to contacs
1
2
3
4
Press
-
Contact].
under Contcs and select [New
If Busy: When your handset is on a call or
transferring data.
Assign a name, phone number and select
[Options]
.
If No Answer: When you do not answer on
the first 4 rings.
Select Voice Name and follow the propmt to
record the voice name.
If Unreachable: When your handset is out of
coverage or powered off.
Press
-
under Back and
-
under Save.
Note: Your handset comes pre-programmed
to detailed forward to Mike’s Voice Mail. If you
calls
98
place a call using voice name
With the flip closed or open, press the
speaker key until you are prompted to
say the voice name.
Your phone supports emergency calling.
Emergency phone calls can be made even
when your SIM card is blocked or not in your
phone.
1
t
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
The handset will automatically place the call.
emergency calls
Your service provider programs one or more
emergency phone numbers that you can call
under any circumstances, even when your
phone is locked or the SIM card is not
inserted.
When you make an emergency call, your
phone’s GPS Enabled feature can help
emergency service personnel find you, if you
are in a location where your phone's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your best knowledge
of your location to the emergency response
center when you make an emergency call.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
Note: Emergency calls cannot be placed
while the keypad is locked.
calls
99
Note: If you have not registered on the
network, emergency calls cannot be placed
while your SIM card is in your phone.
3
Press
N.
turbo dial
The first nine entries in your contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
international calls
If your phone service includes international
dialing, press and hold 0 to insert your local
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
voicemail
receive a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
speed dial
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
•
To call TELUS voice mail system and
listen to the message, press under
-
Call
.
1
From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
2
Press
#.
calls
100
•
To dismiss the message notification:
If the flip is closed, press the smart key
feature activation. If you have not received a
fax number, please contact the nearest
TELUS dealer or call TELUS client care.
.
on the top.
If the flip is open, press
under Back, or close the flip.
Please see www.telusmobility.com for
more details of TELUS Voice Messaging
services.
r, and press
-
If the caller leaves a message, this icon y
appears on the display, reminding you that
you have a new message.
fax mail Indicator
Your handset is equipped with a Fax Mail
indicator to notify you when you have
received a fax through Mike's Advanced Voice
Mail with Fax.
advanced voice mail with fax
Mike's Advanced Voice Mail with Fax allows
you to receive faxes directly to your handset
and store them along with your voice
messages until you are ready to print. Follow
the voice mail prompts to print the fax to a fax
machine. It ensures privacy, convenience and
eliminates the need for a separate fax line.
Shortcut: From the home screen press
under Msgs
-
>
Fax Mail.
When you receive a new fax, New FaxMail
Message appears on the display.
Your handset will alert you audibly until you
When you subscribe to Mike's
press
-
under Call or
-
under Exit.
Advanced Voice Mail with Fax, you will
receive a fax number from your point of
calls
101
other features
advanced calling
feature
feature
3-way call
Make or receive a phone call
and press 3 Way. Enter
the second phone number,
press and under Join.
M
>
call waiting To accept the second call
and put the active call on
N
-
hold press
-
under Yes.
Tip: For quick ways to enter
the number, press to
see the dialing menu.
To accept the second call
M
and end the active call press
O
.
You cannot make any other
calls after you have joined a
3-way call, even if one party
disconnects.
Your phone rings with the
second call for you to
answer.
other features—advanced calling
103
alarm clock
feature
feature
flip
activation
To make your handset to
answer and end calls by
opening and closing the flip
access
To access the alarm clock
alarm clock press
M
>
T
>
Alarm Clock
press
M
>
u
>
Phone Calls
Plus
>
Flip Activation
Select Flip To Ans
to End On
.
To set the alarm clock press
under Set. Use to set
the desired time and press
under Done
stop watch To access the stop watch
>
On and Flip
-
>
.
any key
answer
To answer phone calls by
pressing any key on the
-
keypad press
M
>
u
>
On
press
M
M
>
>
T
Stopwatch
>
Alarm Clock
Phone Calls
>
Any Key Ans
>
.
Plus
>
Press
- under Start
quick timer To access the quick timer
press
M
M
>
>
T
>
Alarm Clock
Plus
>
Quick Timer
Use
time and press
to set the desired
-
under
Start
other features—alarm clock
104
contacts
feature
feature
do not
disturb
To access Do not disturb
press
M
M
>
>
T
>
Alarm Clock
edit/delete
contact
entry
Press
Select a contact and press
Edit. Change the
desired content and press
-
under Contacts.
Plus
>
Do Not Disturb.
Press
- under Yes.
M
>
“Do Not Disturb”mode will
allow you to turn off your
phone’s transmitters. When
your phone is set to Do Not
Disturb, no incoming phone or
private calls will be received.
-
under Save
.
set ringer ID Press
-
under Contacts.
Select a contact and press
M
>
Edit [Ring Tone/Picture].
>
Select desired ringer and
press under Back
under Save
Press under Contacts.
Select a contact and press
-
>
-
Note: Alarm Clock features only work when
the handset is powered On.
set picture
ID
-
Warning: When you set the alarm clock,
"default subject" data is stored in your
datebook. This data is neccessary for the
alarm clock to work properly; do not delete
this data from the datebook.
M
>
Edit [Ring Tone/Picture].
>
Select desired picture and
press under Back
under Save
-
>
-
other features—contacts
105
datebook
feature
feature
receive
datebook
events via
PTT
To view the information
while still in the Private call
create
datebook
events
To create a new Datebook
event press
Datebook > [New Event].
press
r.
M
>
m
>
The 5 most recent events
received from a Private ID
are stored with the that
Private ID on the recent calls
list.
see datebook To see a calendar event
event
press
Press
M
>
m
>
Datebook.
left or right to see
up or down
the day and
to see the events.
To store events to the
Datebook press
-
under
event
reminder
When an event reminder
Save while viewing the event
you want to store.
occurs press
Press under Back to close
the reminder.
-
under View.
-
other features—datebook
106
GPS
feature
view
approximate location press
To see your aproximate
Note: To improve GPS performance:
M
>
u
>
•
•
•
Stay in the open,
location
GPS
>
Position. Scroll to view
the entire screen.
Extend your phone's antenna
To recalculate position press
Refresh. This may take several
minutes.
Move away from other electrical or
electronic devices
•
•
Remain stationary.
set GPS
privacy
options
To set the level of privacy for
your GPS system press
Avoid touching the antenna with your
hands.
M
>
u
>
GPS
>
Privacy.
feature
If your GPS PIN security
feature is enabled, enter
your GPS PIN and select the
privacy option you want.
make an
emergency
call
Dial your local emergency
number to be connected to
an emergency response
center. If you are on an
active call, you must end it
before making an
emergency call.
other features—GPS
107
handsfree
feature
set GPS PIN To set up a PIN to access
security
Note: The use of wireless phones while
driving may cause distraction. Discontinue a
call if you can't concentrate on driving.
Additionally, the use of wireless devices and
their accessories may be prohibited or
restricted in certain areas. Always obey the
laws and regulations on the use of these
products.
your GPS press
M
>
u
>
Security
>
GPS PIN. Select On
and enter the current GPS
PIN.
Note: When you receive
your phone, your GPS PIN is
0000.
To change your GPS PIN
feature
press
Change Passwords
M
>
u
>
Security
>
speaker-
phone
Activate the speakerphone
while driving:
>
GPS PIN.
Enter the current GPS PIN
and enter the new 4- to 8-
digit GPS PIN. Re-enter the
new 4- to 8-digit GPS PIN to
confirm.
Press and hold the
speakerphone key or press
-
under Options
>
Speaker.
other features—handsfree
108
memory card
feature
feature
auto
answer
To automatically answer
calls when connected to a
change
storage
To choose whether media
items are saved to your
car kit or headset press
M
>
u
>
Phone Calls
>
Auto Ans.
preferences phone's memory or to the
memory card press
Select the amount of rings
M
Store Media
>
before answering.
u
>
Memory Card
>
>
On Phone or Prefer On Card.
Note: If the memory card is
not in the phone, even if you
choose Prefer On Card, the
media items are saved to
your phone's memory.
other features—memory card
109
messages
feature
feature
manage
memory
To view your used memory,
free memory, memory
capacity, and number of files
read
messages
When you receive a
text message, it will
in phone memory press
M
>
automatically appear on your
phone's main display
screen. To view the entire
>
j
>
Media Center
>
M
Memory Usage
.
To free memory on your
message press
down. If
phone, delete items from
the media center, voice
records, or Java
applications. To free
memory on the memory
card, delete items from the
card's folders.
the messages is urgent, the
message icon blinks in your
display.
reply to
messages
While the message is
open press
-
under
Reply. Type message and
press
or
-
-
under Send.
Press
under Reply. Select
a quick message and press
under Send
-
other features—messages
110
pc applications
personalize
feature
feature
other PC
applications applications visit
For a list of complete PC
language
To change language, press
M
>
u
>
Display/Info
>
www.motorola.com/iden
Language
backlight
To select how long the
time length display screen and keypad
are backlit, press
M
>
u
>
Display/Info
>
Backlight
menu style To show the main menu as
tabs, graphic icons or a text-
based list, press
M
>
u
>
Display/Info
>
Menu View
Display/Info
On
clock
display
Press
M
>
u
>
>
>
Clock
>
Display
other features—pc applications
111
TTY
security
feature
feature
turn On TTY From the home screen
phone lock
To lock the phone press
M
>
feature
press
M
>
u
>
On.
Phone Calls
>
u
>
Security
>
Phone Lock
>
TTY
>
Use TTY
>
Lock Now or Auto Lock.
choose TTY From the home screen
keypad lock To lock the keypad press
M
>
mode
press
M
>
u
>
Phone Calls
>
u
>
Security
>
Keypad Lock
>
TTY
>
Type.
Lock Now or Auto Lock
Select from TTY, VCO or HCO.
Shortcut: To lock the
keypad press
enable SIM To enable SIM PIN, press
PIN Security SIM PIN
M
>
*
change the
TTY baud
rate
From the home screen
press
M
>
u
>
Phone Calls
>
TTY
Select 45.45 or 50.00
change TTY While in the TTY call, press
>
Baud.
M
>
u
>
>
>
On
.
change SIM To change the SIM PIN,
PIN press
M
>
u
>
Security
>
mode
during a call
M
>
In Call Setup
>
TTY
>
Type.
Change Passwords
>
SIM PIN
.
Select from TTY, VCO or HCO
.
Note: You can make emergency calls on a
locked phone (see page 99). A locked phone
other features—TTY
112
still rings or vibrates for incoming calls or
messages, but you need to unlock it to
answer.
other features—security
113
other features—security
114
Important Safety and
Legal Information
115
Safety and General Information
Safety Information
This section contains important information on the safe and
•
•
•
•
•
United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
efficient operation of your phone. Read this information
before using your integrated multi-service portable radio.*
American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
Exposure to Radio Frequency (RF)
Energy
Your phone contains a transmitter and receiver. When it is ON, it
receives and transmits RF energy. When you communicate with
your phone, the system handling your call controls the power level
at which your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human beings
to RF energy.
Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.*
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
•
•
Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
Portable Radio Product Operation and
EME Exposure
ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) "Regulation of the limitation of exposure to
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
*
The information provided in this document supersedes
the general safety information in user’s guides
published prior to May 1, 2006
Safety Information
116
electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz."
"Attachment to Resolution 303 from July 2, 2002."
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one
to two inches (2.5 to 5 cm) away from the
lips
.
Operational Precautions
To assure optimal radio product performance and to be sure that
human exposure to RF does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions:
If you wear a radio product on your body when
transmitting, always place the radio product in a Motorola
approved clip, holder, holster, case or body harness. If you do not
use a body-worn accessory supplied or approved by Motorola and
are not using the radio product in the intended use positions along
side the head in the phone mode or in front of the face in the
two-way radio mode, or if you hang your device from a lanyard
around your neck, keep the device at least 2.5 centimeters (1 inch)
from your body when transmitting.
Phone Operation
When placing or receiving a phone call, hold your radio product as
you would a wireline telephone. Speak directly into the
microphone
.
Approved Accessories
Two-way radio operation
For a list of approved Motorola accessories call 1-800-453-0920, or
visit our website at www.motorola.com/iden.
Your radio product has been designed and tested to comply with
national and international standards and guidelines regarding
human exposure to RF electromagnetic energy, when operated in
the two-way mode (at the face, or at the abdomen when using an
audio accessory) at usage factors of up to 50% talk/50% listen.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed or
otherwise configured for RF energy compatibility. In some
circumstances your handset may cause interference with other
devices.
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important
because this radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
Safety Information
117
your wireless phone with your implantable medical device, consult
your health care provider.
Follow Instructions to Avoid Interference
Problems
Turn OFF your radio product where posted notices instruct you to
Hearing Aids
Some phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
do so.
In an aircraft, turn off your radio product whenever instructed to do
so by airline staff. If your radio product offers an airplane mode or
similar feature, consult airline staff about using it in flight.
Other Medical Devices and Health Care Facilities
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker
or defibrillator, consult your physician before using this radio
product.
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Turn off your radio product
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Persons with implantable medical devices should observe the
following precautions:
Driving Precautions
•
ALWAYS keep the phone more than 20 centimeters (8
inches) from the implantable medical device when the
phone is turned ON.
Check the laws and regulations on the use of radio products in the
area where you drive. Always obey them.
•
•
DO NOT carry the phone in a breast pocket;
When using your radio product while driving, please:
Use the ear opposite the implantable medical device to
minimize the potential for interference.
•
Give full attention to driving and to the road. Using a
phone may be distracting. Discontinue a call if you can’t
concentrate on driving.
•
Turn OFF the phone immediately if you have any reason to
suspect that the interference is taking place.
•
•
Use hands free operation, if available.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
Pull off the road and park before making or answering a
call if driving conditions so require.
Safety Information
118
•
Do not place a handset in the airbag deployment area.
Batteries and Chargers
Responsible driving practices can be found in the “Smart Practices
While Driving” section at the end of this guide and/or at the
Motorola Web site: www.motorola.com/callsmart.
Caution: Improper treatment or use of batteries may present
a danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery Safety”
section in this user’s guide.
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Note: The use of wireless phones while driving may cause
distraction. Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
Symbol
Definition
032374o
Important safety information
follows.
Operational Warnings
Obey all posted signs when using phones in public areas.
Do not dispose of your battery
or phone in a fire.
Potentially Explosive Atmospheres
Your battery or phone may
require recycling in
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust
or metal powders.
032375o
accordance with local laws.
Contact your local regulatory
authorities for more
information.
When you are in such area, turn off your handset, and do not
remove, install, or charge batteries unless it is a radio product type
especially qualified for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved). In such areas,
sparks can occur and cause an explosion or fire.
Do not throw your battery or
phone in the trash.
Your phone contains an
internal lithium ion battery.
Li Ion BATT
032378o
Safety Information
119
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-lights
feature (if available) on your phone.
Symbol
Definition
Do not let your battery,
charger, or phone get wet.
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and stop
use if you are very tired.
Listening at full volume to
music or voice through a
headset may damage your
hearing.
Choking Hazards
Your portable radio or its accessories may include detachable
parts, which may present a choking hazard to small children. Keep
your device and its accessories away from small children.
Caution About High Volume Usage
Listening at full volume to music or voice through a
headset may damage your hearing.
Glass Parts
Some parts of your phone may be made of glass. This glass could
break if the product is dropped on a hard surface or receives a
substantial impact. If glass breaks, do not touch or attempt to
remove. Stop using your phone until the glass is replaced by a
qualified service center.
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. If you continue to have discomfort during or after such
use, stop use and see a physician.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when playing video
games. These may occur even if a person has never had a previous
seizure or blackout.
Safety Information
120
Service & Repairs
If you have questions or need assistance, we’re here to help.
Motorola Customer Support Center at 1-800-453-0920 (United
States), 1-877-483-2840 (TTY/TDD United States for hearing
impaired).
Go to www.motorola.com/iden, where you can select from a
number of customer care options. You can also contact the
Export Law Assurances
Service
&
Repairs
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
Service & Repairs
121
Specific Absorption Rate Data
SAR Data
ALL MODELS WITH FCC ID IHDT56HF1 MEET THE
general, the closer you are to a wireless base station antenna, the
lower the power output.
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that is does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested
for use at the ear is 1.31 W/kg and when tested on the body, as
described in this user guide, is 1.51 W/kg during packet data
transmission. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC
requirements.)2
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits
are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of
age and health.
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
requirement for safe exposure. Please note that improvements to
this product model could cause differences in the SAR value for
later products; in all cases, products are designed to be within the
guidelines.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are
conducted using standard operating positions reviewed by the FCC
with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
(CTIA) web-site at http://www.ctia.org or the Canadian Wireless
Telecommunications Association (CWTA) Web site:
http://www.cwta.ca
SAR Data
122
1. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to account
for any variations in measurements.
2. The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for
this product.
SAR Data
123
Motorola Limited Warranty for the United States and
Canada
consumers in the United States or Canada, which are
What Does this Warranty Cover?
accompanied by this written warranty:
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES
AND SOFTWARE PURCHASED IN THE UNITED STATES OR
CANADA
Products Covered
Length of Coverage
Products as defined
above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants
its Motorola iDEN Digital Mobile and Portable Handsets
("Products"), Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and Motorola software
contained on CD-Roms or other tangible media and sold for use
with these Products ("Software") to be free from defects in
materials and workmanship under normal consumer usage for the
period(s) outlined below. This limited warranty is a
Accessories as
defined above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
consumer's exclusive remedy, and applies as follows to
new Products, Accessories and Software purchased by
Products or
The balance of the
original warranty or
for ninety (90) days
from the date returned
to the consumer,
Accessories that are
Repaired or
Replaced.
whichever is longer.
SAR Data
124
commercial purposes or subjecting the Product or Accessory to
abnormal usage or conditions; or (d) other acts which are not the
fault of Motorola, are excluded from coverage.
Products Covered
Length of Coverage
Software as defined
above. Applies only to
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or floppy
disk).
Ninety (90) days from
the date of purchase.
Use of Non-Motorola Products and Accessories. Defects or
damage that result from the use of Non-Motorola branded or
certified Products, Accessories, Software or other peripheral
equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, including without limitation, software
changes, or modification in any way by someone other than
Motorola, or its authorized service centers, are excluded from
coverage.
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are excluded from
coverage.
Ornamental Decorations. Ornamental decorations such as
emblems, graphics, rhinestones, jewels, gemstones and their
settings, and other decorative elements, are excluded from
coverage.
Batteries. Only batteries whose fully charged capacity falls below
80% of their rated capacity and batteries that leak are covered by
this limited warranty.
Communication Services. Defects, damages, or the failure of
Products, Accessories or Software due to any communication
service or signal you may subscribe to or use with the Products,
Accessories or Software is excluded from coverage.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or neglect,
such as physical damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with liquid, water,
rain, extreme humidity or heavy perspiration, sand, dirt or the like,
extreme heat, or food; (c) use of the Products or Accessories for
Software Embodied in Physical Media. No warranty is made
that the software will meet your requirements or will work in
combination with any hardware or software applications provided
by third parties, that the operation of the software products will be
SAR Data
125
uninterrupted or error free, or that all defects in the software
products will be corrected.
copy of your receipt, bill of sale or other comparable proof of
purchase; (b) a written description of the problem; (c) the name of
your service provider, if applicable; (d) the name and location of the
installation facility (if applicable) and, most importantly; (e) your
address and telephone number.
Software NOT Embodied in Physical Media. Software that is
not embodied in physical media (e.g. software that is downloaded
from the internet), is provided "as is" and without warranty.
What Other Limitations Are There? ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS,
ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Who is covered? This warranty extends only to the first
consumer purchaser, and is not transferable.
What will Motorola Do? Motorola, at its option, will at no
charge repair, replace or refund the purchase price of any Products,
Accessories or Software that does not conform to this warranty.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new Products,
Accessories or parts. No data, software or applications added to
your Product, Accessory or Software, including but not limited to
personal contacts, games and ringer tones, will be reinstalled. To
avoid losing such data, software and applications please create a
back up prior to requesting service.
How to Obtain Warranty Service or Other Information? To
obtain service or information, please call:
Motorola iDEN Customer Services 1-800-453-0920 or
954-723-4910
TTY-877-483-2840
Or visit us online at http://www.motorola.com/iden/support
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include: (a) a
SAR Data
126
exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from
state to state or from one jurisdiction to another.
c.Should the Product or parts become, or in MOTOROLA'S opinion
be likely to become, the subject of a claim of infringement of a
United States patent, that such purchaser will permit MOTOROLA,
at its option and expense, either to procure for such purchaser the
right to continue using the Product or parts or to replace or modify
the same so that it becomes non-infringing or to grant such
purchaser a credit for the Product or parts as depreciated and
accept its return. The depreciation will be an equal amount per
year over the lifetime of the Product or parts as established by
MOTOROLA.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce and distribute
copies of the Motorola software. Motorola software may only be
copied into, used in, and redistributed with, the Products
associated with such Motorola software. No other use, including
without limitation disassembly of such Motorola software or
exercise of the exclusive rights reserved for Motorola, is
permitted.
MOTOROLA will have no liability with respect to any claim of
patent infringement which is based upon the combination of the
Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or used in
connection with the Product or any parts thereof.
Patent and Software Provisions
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a United States patent, and
Motorola will pay those costs and damages finally awarded
against the end user purchaser in any such suit which are
attributable to any such claim, but such defense and payments are
conditioned on the following:
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software, such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software
was originally embodied and such software in such Product may
not be replaced, copied, distributed, modified in any way, or used
to produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise or
rights in such MOTOROLA software is permitted. No license is
a.That MOTOROLA will be notified promptly in writing by such
purchaser of any notice of such claim;
b.That MOTOROLA will have sole control of the defense of
such suit and all negotiations for its settlement or
compromise; and
SAR Data
127
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
SAR Data
128
Hearing Aid Compatibility
HAC
A number of Motorola phones have been tested for hearing aid
“M” Rating: Phones rated M3 or M4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing aids than unrated phones. (M4 is the
“better” or higher of the two ratings.) On those models with an
extendable antenna, this rating is determined only with the
antenna extended.
compatibility. When some wireless phones are used with certain
hearing aids, users may detect a noise which can interfere with
the effectiveness of the hearing aid.
Some hearing aids are more “immune” than others to this
interference noise, and phones can also vary in the amount of
interference noise they may generate. ANSI standard C63.19 was
developed to provide a standardized means of measuring both
mobile phone and hearing aids to determine usability rating
categories for both.
“T” Rating: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing aid's telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. (T4 is the “better” or
higher of the two ratings.) On those models with a telecoil mode
setting, this rating is determined only with the phone so set. For
setting instructions, see “Features for the Hearing Impaired” in the
section entitled “Advanced Calling Features”. Note that not all
hearing aids have telecoils in them.
Ratings have been developed for mobile phones to assist hearing
aid users find phones that may be compatible with their hearing
aid. Not all phones have been rated for compatibility with hearing
aids. Phones that have been rated have a label with the rating(s)
located on the box, and at www.motorola.com/accessibility.
Hearing aids may also be measured for immunity to interference
from wireless phones and may have ratings similar to wireless
phones. Ask your hearing health care professional for the rating of
your hearing aid. Add the rating of your hearing aid and your phone
to determine the estimated usability:
These ratings are not guarantees of compatibility. Results will vary
depending on the user's hearing aid and individual type and degree
of hearing loss. If a hearing aid is particularly vulnerable to
interference, even a phone with a higher rating may still cause
unacceptable noise levels in the hearing aid Trying out the phone
with your hearing aid is the best way to evaluate it for your
personal needs.
•
Any combined rating equal to or greater than six offers
excellent use.
•
Any combined rating equal to five is considered normal
use.
HAC
129
•
Any combined rating equal to four is considered usable.
Thus, if you use an M3 phone with a M3 hearing aid you will have
a combined rating of six for “excellent use.” This methodology
applies equally for T ratings.
More information about hearing aid compatibility may be found at:
www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and
www.hearingloss.org/learn/cellphonetech.asp
HAC
130
Information From the World Health Organization
WHO Information
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Further information: http://www.who.int./peh-emf
Product Registration
Registration
Online Product Registration:
http://direct.motorola.com/hellomoto/
Motosupport/source/registration.asp
Product registration is an important step toward enjoying your new
Motorola product. Registering helps us facilitate warranty service,
and permits us to contact you should your product require an
update or other service. Registration is for U.S. residents only and
is not required for warranty coverage.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Thank you for choosing a Motorola product.
WHO Information
131
Wireless: The New Recyclable
Recycling
Your wireless phone can be recycled. Recycling your phone
As a phone user, you have an important role in ensuring that this
device is recycled properly. When it comes time to give this phone
up or trade it in for a new one, please remember that the phone,
the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at:
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their phones and
have taken steps to promote the collection and environmentally
sound recycling of end-of-life devices.
http://recycling.motorola.young-america.com/ index.html
California Perchlorate Label
Perchlorate Label
Some mobile phones use an internal, permanent backup battery on
the printed circuit board that may contain very small amounts of
perchlorate. In such cases, California law requires the following
label:
“Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
There is no special handling required by consumer.
Recycling
132
Patent and Trademark Information
Patent and Trademark
MOTOROLA, the Stylized M Logo and all other trademarks
Software Copyright Notice
indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2007 Motorola, Inc. All rights reserved.
The Motorola products described in this manual may include
copyrighted Motorola and third party software stored in
semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola and third party
software providers certain exclusive rights for copyrighted
software, such as the exclusive rights to distribute or reproduce
the copyrighted software. Accordingly, any copyrighted software
contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to
the extent allowed by law. Furthermore, the purchase of the
Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the
copyrights, patents, or patent applications of Motorola or any third
party software provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation of law in the
sale of a product.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
All other product names or services mentioned in this manual are
the property of their respective trademark owners.
Patent and Trademark
133
Privacy and Data Security
Privacy and Data Security
Motorola understands that privacy and data security are important
•
Understanding AGPS: In order to comply with
to everyone. Because some features of your phone may affect your
privacy or data security, please follow these recommendations to
enhance protection of your information:
emergency caller location requirements of the FCC, certain
Motorola phones incorporate Assisted Global Positioning
System (AGPS) technology. AGPS technology also can be
used in non-emergency applications to track and monitor a
user’s location, for example, to provide driving directions.
Users who prefer not to permit such tracking and
•
Monitor access: Keep your phone with you and do not
leave it where others may have unmonitored access. Lock
your device’s keypad where this feature is available.
monitoring should avoid using such applications.
•
Keep software up to date: If Motorola or a
software/application vendor releases a patch or software
fix for your phone which updates the device’s security,
install it as soon as possible.
If you have further questions regarding how use of your phone may
impact your privacy or data security, please contact Motorola at
[email protected], or contact your service provider.
•
Erase before recycling: Delete personal information or
data from your phone prior to disposing of it or turning it in
for recycling. For step-by-step instructions on how to
delete all personal information from your device, please
contact your local service provider.
Privacy and Data Security
134
Smart Practices While Driving
Driving Safety
Drive Safe, Call Smart SM
road. If you receive an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
Check the laws and regulations on the use of phones and
their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas. Go to www.motorola.com/callsmart
for more information.
Your phone lets you communicate by voice and data, almost
anywhere, anytime, wherever wireless service is available and
safe conditions allow. When driving a car, driving is your first
responsibility. If you choose to use your phone while driving,
remember the following tips:
•
•
•
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your
address book takes attention away from your primary
responsibility, driving safely.
Dial sensibly and assess the traffic; if possible,
place calls when your car is not moving or before
pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
•
Get to know your Motorola phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking your
attention off the road.
•
When available, use a hands-free
device. If possible, add an additional
layer of convenience to your phone with
one of the many Motorola Original
hands-free accessories available today.
•
•
Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that can divert your attention away from the
road.
•
Position your phone within easy reach. Be able to
access your phone without removing your eyes from the
Use your phone to call for help. Dial 911 or other local
emergency number in the case of fire, traffic accident, or
medical emergencies.**
Driving Safety
135
•
•
Use your phone to help others in emergencies. If you
see an auto accident, crime in progress, or other serious
emergency where lives are in danger, call 911 or other
local emergency number, as you would want others to do
for you.**
Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number.*
*
Wherever wireless phone service is available.
Driving Safety
136
index
caller ID 97
A
B
camera 39, 43
digital viewfinder 45
photo editor 45
record video 44
self-timer 44
center key 84
center select key 10
clock 111
clock screen saver 79
codes 85
contacts 105
edit/delete 105
set picture ID 105
set ringer ID 105
accessories 10, 30
activate your Mike
account 11
backlight 111
battery 16, 17
battery indicator 81
Bluetooth
active phone line 81
advanced calling 103
3-way calls 103
call waiting 103
alarm clock 104
do not disturb 105
quick timer 104
stop watch 104
alert
connect 75
send information 77
turning on or off 75
bluetooth 74
C
call
answer 19
any key answer 104
end 19
set 92, 93
turn off 92, 96
answer a call 19
make 19
call forward 97
D
datebook 106
index
137
create events 106
receive events
via PTT 106
F
H
impaired 90
find your phone number 23
flip 19
flip activation 104
frequently asked questions
service and repairs 121
auto answer 109
speaker-phone 108
handsfree speaker 84
hearing aid 88
Hearing Aid
Compatibility 129
home screen 80
setup 94
view reminders 106
dial a phone number 19
dialed calls 96
display 80
Drafts 26
see also text messages,
drafts
G
I
GPS 107
approximate location 107
emergency calls 107
privacy options 107
security PIN 108
GPS enabled
emergency calls 99
GPS PIN 85
international calls 100, 101
E
earpiece volume 92
emergency number 99
end a call 19
end key 19
export regulations 121
K
keypad
locking 85
L
GPS, see GPS enabled
language 111
lock
phone 85
index
138
low battery message 81
as a 28
music player 31
power key 18
private calls
M
answer 20
call alerts 20
make 19
receive a call alert 21
PT Manager 55
PTT features
push to send 47
Push To View 47
main menu 81
make a call 19
media center 40
Memory
text messages 27
memory card 13, 109
manage memory 110
ring tones 92
storage preferences 109
menu style 111
Message center
text messages 25
messages
fax mail indicator 101
read messages 110
reply 110
N
navigation key 10, 84
net alerts 102
O
one touch PTT 54
optional accessory 10
optional feature 10
Q
quick notes
create, edit 24, 26
P
packet data 81
passwords 85
passwords. See codes
PC applications 111
personalize 110, 111
phone
R
radio frequency 116
received calls 96
recent calls 96
MMS 55
modem
recycling 132
locking 85
index
139
redial 97
ring style indicator 81
ring tones
off 92, 93
setting 92
SIM PIN 85
view 66
soft keys 80
speaker 81
sent messages 26
transmitter 86
TTY calls 112
turn on/off 18
vibrate 92, 93
ring tones, setting 92
ringer volume 92
speed dial 100
store your number 23
U
unlock
phone 85
unlock code 85
T
S
text 23
safety
radio frequency 116
RF energy
interference 117
safety information 116
safety tips 135
security 85, 112
security code 85
send key 19
text entry 81
alpha method 83
word method 82
text messages 23
creating 25
deleting 26, 27
drafts 26
memory 27
message center 25
receiving 24
V
video 44, 45
voice mail
advance voice mail with
fax 101
receiving 100
voice name 98
voicemail 100
voicemail message
indicator 100
signal strength indicator 80
SIM card 11
security 12
resend messages 26
sending 25
index
140
volume 92
W
wallpaper 93
WHO information 131
wireless web 72
microbrowser
navigation 73
index
141
|