DIGITAL WALL CLOCK OVERVIEW
POWER UP
ALARM SETTING
1. Insert 1-AA battery into the clock.
• Hold the ALM button to enter Alarm Settings.
2. Configure basic settings.
• Press the +/HR or - ºF/ºC button to adjust values.
Alarm &
Snooze
Indicators
• Press the ALM button to confirm and move to the
SETTINGS
DIGITAL WALL CLOCK
AM or PM
Indicator
next item or exit.
• Hold the SET button to enter the Settings Menu.
• Press the +/HR or - ºF/ºC button to adjust values.
• Press the SET button to confirm and move to the
next item or exit.
Time Display
with Indoor Temp and Calendar
Month | Date
Display
Indoor
Temperature
Display
QUICK START GUIDE
ACTIVATE | DEACTIVATE ALARM
• Press the ALM button to activate or deactivate the
alarm. The Alarm Indicator will display when active.
Weekday
Display
(°F/°C)
Settings Menu Order:
• 12/24 Hour Time Format
• Hour
Note: The alarm will automatically be activated after
setting a new alarm time.
• Minutes
Buttons
• Year
• Month
• Date
SNOOZE
• When the alarm sounds, press the SNZ button to
silence the alarm for 5 minutes. The Alarm and
Snooze Indicators will flash.
Mounting
Hole
Note: The Weekday will set automatically as Year,
Month, and Date are set correctly.
• Press any button except SNZ to stop the alarm for
24 hours.
Battery
Compartment
Pull Out
Stand
FAHRENHEIT | CELSIUS
• Press the - ºF/ºC button to select Fahrenheit or
Celsius temperature display.
Page | 3
Model: WT-8002U
DC:050818
• This is a crescendo alarm that will sound for 120
seconds if not deactivated.
Page | 2
Page | 4
|