Sprint Phone Connect 2
User Guide
©2012 Sprint. Sprint and the logo are trademarks of Sprint. Other marks are trademarks of their
respective owners.
Electronic Device.................................................................................................................16
Safety of Children................................................................................................................17
Cleaning and Maintenance..................................................................................................18
FCC Statement....................................................................................................................19
TOC
ii
Introduction
The following topics introduce you to the features of your new Sprint Phone Connect 2.
Package Contents
After opening the package, check to make sure that you have all the parts shown below. If any
item is missing or broken, please contact Sprint.
Sprint Phone Connect 2
Antenna
Backup Battery
Recycling Envelope
Power Adapter
Get Started Guide
Important Information Booklet
Note: The figures in this document are provided only for your reference. The actual shape and
color of the product may differ slightly.
Note: The Sprint Phone Connect 2 does not include a telephone. You must provide your own
home telephone. It can be either a traditional corded phone or a cordless phone with a
wired base.
Introduction
1
Your Sprint Phone Connect 2
The following illustrations outline your device's primary external features.
Top View
Number Description
1
Power indicator
2
Voicemail indicator
Battery indicator
3
4
Signal indicator
5
Signal strength indicator
Power button
6
7
Telephone port 1
Telephone port 2
DC 12V power port
USB port* (see Important note)
Antenna port
8
9
10
11
Important:
Never place a USB-based device into the USB port of the Sprint Phone Connect
2 under any circumstances. Doing so may damage the device and negate its
warranty. The port was designed for diagnostic purposes only; it is not intended
for customer use.
Introduction
2
Bottom View
Number Description
1
2
3
4
Battery cover
Battery slot
Battery port
Wall-mounting brackets
Introduction
3
Installation and Operation
Installing the Battery
The following steps illustrate how to insert the battery into the Sprint Phone Connect 2.
1. Press and slide the cover to remove the battery cover.
2. With the battery label facing up and the connector wires to the left, insert the battery
connection cable into the battery port.
3. Place the battery in the battery slot and slide the battery cover back into place.
Battery Information
The guidelines listed below provide battery information for your Sprint Phone Connect 2.
● In order to avoid damage, charge the battery only in temperatures that range from 0 ℃
to 45 ℃.
Installation and Operation
4
● Talk time is approximately 2.5 hours and standby time is approximately 30 hours. Actual
values will vary with the network environment.
● The battery is intended for backup purposes only (in the event of a power failure).
● When the power adapter is connected the battery will automatically charge.
● When fully charged the battery will automatically stop charging.
● Remove the battery if the device is not in use for a long time.
Installing the Antenna
The following steps illustrate how to install the antenna.
1. Make sure the device is turned off.
2. Align the antenna with the antenna port on the device as illustrated below.
3. Screw the antenna into the port, ensuring that the connection is secure.
Installing the Power Adapter
The following steps illustrate how to install the power adapter. Under normal usage, the device
relies on the external power adapter for its power supply.
1. Insert the power adapter into the DC input port.
2. Plug the unit into a standard AC electrical outlet.
Note: Backup battery power will only be used during power failure or if the external power
adapter is not in use.
Installation and Operation
5
Connecting a Telephone to Sprint Phone Connect 2
The Sprint Phone Connect 2 device provides ports for up to two telephones. The ports use the
same telephone number.
1. Unplug your telephone from your wall's telephone jack.
2. Plug one end of your telephone's cord into one of the telephone ports. (The other end of
the cord must remain plugged into the phone or the telephone base unit, depending on
the type of phone you're connecting).
Warning:
Do not plug Sprint Phone Connect 2 into your telephone wall jack.
Installation and Operation
6
Note: The telephone and telephone cord are not included. You must provide your own
telephone and telephone cord.
Note: The device and telephone cord are for indoor use only.
Note: Only telephones connected directly to the Sprint Phone Connect 2 will receive service. If
the Sprint Phone Connect 2 is connected to a cordless phone base station, any
extension phones compatible with that base station will also receive service.
Powering Sprint Phone Connect 2 On and Off
Use the power button to turn the Sprint Phone Connect 2 on and off.
► To power the device on, press and hold the
button until power indicator turns on.
button until all indicators turn off.
► To power the device off, press and hold the
Note: For the first time you use the Sprint Phone Connect 2, wait 3-5 minutes for activation to
finish or while LEDs are blinking green from right to left. Do not touch your Sprint Phone
Connect 2 during this time. If after 5 minutes the LED lights are still blinking, power cycle
your device using the power button.
Understanding the Indicators
The four LED lights on the front of your device let you know your device’s status at any given
time.
Light
Indicator
Meaning
White
The device is on
Power
Solid Green
Blinking Green
Blinking Red
Solid Red
Green
Full Charge
Partial Charge
Low Charge
Battery
No Battery Charge
With signal
Signal
Off
Without signal
Good or Ok
Green
Signal Strength
Red
Poor or None
New Message
Blinking Green
Voicemail
ALL LEDs
Blinking Green from Left to Right
The software is being updated
Installation and Operation
7
Making Calls
Making calls with your Sprint Phone Connect 2 is as easy as making calls using traditional wired
telephone service.
1. Before making a call, make sure signal and signal strength indicators are lit up.
2. Place a call by entering the desired telephone number.
3. When your call is complete, hang up or return the phone to the receiver to ensure that
you can receive calls.
Receiving Calls
If you are using a new telephone number with your Sprint Phone Connect 2, simply share your
new number with friends & family. When they call, answer the phone connected to your Sprint
Phone Connect 2 device. If you're using your existing number, simply answer the phone as
usual when the phone rings.
Adjusting the In-Call Volume
You can adjust the in-call volume in standby mode or during a call. Four volume levels are
available, with level 1 being the lowest and level 4 the highest.
Adjusting the In-Call Volume in Standby Mode
The following steps illustrate how to adjust the in-call volume in standby mode.
1. Pick up the handset.
.
If you hear the dial tone, telephone service is available.
2. Enter # # 1 to adjust the in-call volume.
3. Press a key (1-4) to select the desired volume level.
4. Press the * key to save the volume level.
.
.
If you hear the confirm tone "beep", you have successfully set the volume level.
If you hear the dial tone again, the device has returned to the off-hook state, and you
can proceed to configure other settings.
Note: If you hear the reject tone "beep, beep", you have pressed an incorrect key and failed to
adjust the in-call volume. Wait until the device returns to the off-hook state and you hear
the dial tone again. Then repeat steps 2-4 to adjust the in-call volume again.
Installation and Operation
8
Adjusting the In-Call Volume During a Call
The following steps illustrate how to adjust the in-call volume during a call.
1. While engaged in a call, enter # # 1 to adjust the in-call volume.
2. Press a key (1-4) to select the desired volume level.
3. Press the * key to save the volume level.
.
If you hear the confirm tone "beep", you have successfully set the volume level.
4. Continue with your call.
Note: If you hear the reject tone "beep, beep", you have pressed an incorrect key and failed to
adjust the in-call volume. Continue with your call, and repeat steps 1-4.
Installation and Operation
9
General Functions
Positioning the Device
You may place the Sprint Phone Connect 2 on a smooth surface or mount to a wall.
Horizontal Positioning
Place the device on a smooth surface with good ventilation. Place it at least 4 inches away from
other objects.
Note: Avoid placing Sprint Phone Connect 2 near other electrical equipment, such as a
refrigerator, television, or microwave.
Wall Mounting
You may mount the device to a wall using two wall screws (not included) and the mounting
brackets on the bottom of the device.
1. Fix two wall screws (not included) into the wall with the screw heads extending
approximately 0.1 inches from the surface of the wall.
.
The distance between two screws should be 4 inches.
2. Align the mounting brackets with the screws, push the device towards the wall, and
connect the brackets with the screws, ensuring that the device is stable.
Using Call Waiting
When you are on a call, Call Waiting alerts you to incoming calls.
To use call waiting:
1. When you hear a beep from the receiver on any connected phone during a call, it means
a second caller is trying to connect.
General Functions
10
2. Press the FLASH key to answer the second call.
3. Press the FLASH key again to return to the first call.
Note: Depending on the type of phone you are using with your Sprint Phone Connect 2, you
may need to press a different key to answer a waiting call. Consult your phone's
documentation for details.
Making a Three-Way Call
You can talk with two parties at the same time by using the Three-Way Calling feature on your
Sprint Phone Connect. Please refer to the following steps to make a three-way call:
1. While in the conversation of the first call, press the FLASH key to hold the 1st party.
2. Dial the number of the 2nd party (the # key will be recognized as part of number if
entered).
3. Press the FLASH key within 10 seconds, then the sprint phone will originate the 2nd
party call.
4. When the 2nd party answers, press the FLASH key to initiate the three-way call (if the
2nd party reject, sprint phone will return to the 1st party automatically).
5. While in the three-way call, press the FLASH key to end the 2nd party and return to the
1st party.
6. To end both conversations, hang up the phone.
Note: The FLASH key will vary by telephone type.
Using Voicemail
With your Sprint Phone Connect 2 and your Sprint service, you have access to the Sprint
Voicemail system.
Set Up Voicemail
You should set up your Sprint Voicemail and personal greeting as soon as your phone is
activated. Always use a password to protect against unauthorized access. Your device
automatically transfers all unanswered calls to your voicemail, even if the device is in use or
turned off.
1. Dial *86 to access the Sprint Voicemail system.
2. Follow the system prompts to:
.
.
Create your password.
Record your name announcement.
General Functions
11
.
Record your greeting.
Note: Voicemail Password – Sprint strongly recommends that you create a password when
setting up your voicemail to protect against unauthorized access. Without a password,
anyone who has access to your phone is able to access your voicemail messages.
Retrieve Voicemail Messages
The following steps outline how to access and manage your voicemail messages.
1. The voicemail indicator (
) will blink green to indicate that you have one or more
unheard voicemail messages.
2. Dial *86 to access your voicemail.
3. Follow the system prompts to listen to and manage your voicemail messages.
Note: Please refer to the Troubleshooting section for additional details on accessing voicemail,
or if you would like to use a home telephone answering machine as your preferred
method to manage your voicemail messages.
Using Call Forwarding
Sprint Phone Connect 2 allows you to forward calls to another phone number, including your
mobile phone or office number. Your home phone will not ring until you deactivate the service.
Airtime applies to forwarded calls even if you send the call to landline telephones.
To activate Call Forwarding:
1. Dial *72.
2. Immediately enter the phone number where you want calls to be forwarded (e.g. *72-
212-123-4567).
3. You will hear a confirmation tone.
4. Hang up your home phone or return the phone receiver to its base.
To deactivate Call Forwarding:
1. Dial *720.
2. You will hear a confirmation tone.
3. Hang up your home phone or return the phone receiver to its base.
General Functions
12
Assistive Communication Devices
TTY (Text Telephony) and TDD (Telecommunications Device for the Deaf) allow individuals
who are deaf, hard of hearing, or have speech or language disabilities to communicate by
telephone.
When a user types his or her conversation on a TTY keyboard, it is transmitted as tones through
the telephone. Tones are received by the other person’s TTY, translated into text and displayed
on the screen. In order to use the TTY network, you must have a TTY-compatible phone and be
in the TTY mode to place or receive calls. Note that most digital wireless devices are TTY-
compatible.
Keyboard Codes
You may use the keyboard codes under certain conditions. The following table lists and
describes the keyboard codes messages.
Item
Keyboard code Meaning
##11*
##12*
##13*
##14*
*86
Setting the voice volume to level 1
Setting the voice volume to level 2
Setting the voice volume to level 3
Setting the voice volume to level 4
Accessing the voicemail
Volume adjustment
Voicemail quick codes
Call forwarding activate *72+NUM
Activating Call Forwarding
Call forwarding
*720
Deactivating Call Forwarding
deactivate
##56*0#
Activating TTY off mode
##56*1#
Activating TTY full mode
TTY
##56*2#
Activating VCO (voice carry over) mode
Activating HCO (hearing carry over) mode
Turning off voicemail indicator from device
##56*3#
Turn off voicemail
##54*0#
indicator
Note: NUM is the phone number where you want calls to be forwarded.
General Functions
13
Troubleshooting
If problems occur during the use of the device, refer to the following sections for suggested
solutions. If the problems persist, please contact Sprint.
Why am I not getting a dial tone on my handset?
1. Ensure that the power adapter is properly connected and that the power indicator is
illuminated.
2. Check to make sure the signal indicator is green on.
3. Check to make sure the telephone cable is securely plugged in.
Can I create a shortcut to access my voicemail?
The availability of a shortcut feature to access voicemail messages depends solely on the
capabilities of the corded or cordless phone that you use with Sprint Phone Connect 2. Please
refer to the user material that came with your phone. If your home phone does not support a
shortcut feature to access voice messages, you may have the option to save your voicemail
number into the address book on the handset and assign that number to the #1 speed dial
position on your phone's keypad. Remember, you can always dial *86 to access your voicemail.
Can I use my telephone answering device instead of voicemail?
Yes. Set the answering device to fewer rings in order to pick up the call before voicemail.
Alternatively, turn off your home answering machine or increase the number of rings if you
would like to use the voicemail service. Please refer to the user material provided by the home
answering machine manufacturer for instructions.
Does 911 work on this device?
Yes, but since the Sprint Phone Connect 2 is designed for an indoor environment, please be
prepared to provide your location inside the premises to public service personnel. The GPS
chipset embedded in this device will work best if the device is located near a window or other
opening.
Does this product work during a power outage?
While the Sprint Phone Connect 2 has a backup battery, if the landline device requires external
power to operate, service (including the ability to make and receive 911 calls) will not be
available during a power outage.
Service will only be available during a power outage if the home telephone connected to the
device does not rely on external power to operate (as is the case with many corded phones).
Troubleshooting
14
How long is the battery life of Sprint Phone Connect 2?
Talk time is approximately 2.5 hours and standby time is approximately 30 hours. Actual values
can vary with environmental conditions.
How does Caller ID work?
Caller ID allows you to see the caller's number before you take the call. Please consult your
service provider for further information.
Can I adjust the volume on my telephone?
You can adjust the volume using your telephone connected to the Sprint Phone Connect 2. Four
volume levels are available, with level 1 being the softest and level 4 the loudest. The default
setting is level 3.
How do I set the TTY mode?
Enter the keys # # 5 6 * n # to set the TTY mode, where n equals one of the values below.
.
n=0: TTY off mode. The standard voice speaking mode and the listening mode. This
is the default setting.
.
.
n=1: TTY full mode. Transmit and receive the TTY characters.
n=2: VCO (voice carry over) mode. Receive TTY characters but transmit by speaking
into the speaker.
.
n=3: HCO (hearing carry over) mode. Transmit TTY characters but receive by
listening to the receiver.
Why do I get the recording, "Call cannot be completed as dialed?"
Check the number to ensure you're dialing correctly, without pauses longer than four seconds
between dialed digits.
Troubleshooting
15
Warnings and Precautions
This section contains important information pertaining to the operating instructions of your
device. It also contains information about how to use the device safely. Read this information
carefully before using your device.
Electronic Device
Power off your device if using the device is prohibited. Do not use the device when using the
device causes danger or interference with electronic devices.
Medical Device
● Follow rules and regulations set forth by hospitals and health care facilities. Do not use
your device when using the device is prohibited.
● Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained
between a device and a pacemaker to prevent potential interference with the pacemaker.
If you are using a pacemaker, use the device on the opposite side of the pacemaker and
do not carry the device in your front pocket.
● Some wireless devices may affect the performance of hearing aids. For any such
problems, consult your service provider.
Potentially Explosive Atmosphere
Power off your device in any area with a potentially explosive atmosphere, and comply with all
signs and instructions. Areas that may have potentially explosive atmospheres include the areas
where you would normally be advised to turn off your vehicle engine. Triggering of sparks in
such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not
power on your device at refueling points such as service stations. Comply with restrictions on
the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants.
In addition, adhere to restrictions in areas where blasting operations are in progress. Before
using the device, watch out for areas that have potentially explosive atmospheres that are often,
but not always, clearly marked. Such locations include areas below the deck on boats, chemical
transfer or storage facilities, and areas where the air contains chemicals or particles such as
grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas
(such as propane or butane) whether this device can be safely used in their vicinity.
Traffic Security
● Do not use your device while driving, and observe the local laws and regulations.
Warnings and Precautions
16
● Do not use your device while flying in an aircraft. Power off your device before boarding
an aircraft. Using wireless devices in an aircraft may cause danger to the operation of
the aircraft and disrupt the wireless telephone network. It may also be considered illegal.
Operating Environment
● Do not use or charge the device in dusty, damp, and dirty places or places with magnetic
fields. Otherwise, it may result in a malfunction of the circuit.
● On a stormy day with thunder, do not use your device, to prevent any danger caused by
lightning.
● Do not install outdoor antenna, because it may damage your device.
● When you are on a call, do not touch the antenna. Touching the antenna affects the call
quality and results in increase in power consumption. As a result, the talk time and the
standby time are reduced.
● Use accessories authorized by the manufacturer. Using unauthorized accessories will
render the warranty null and void.
● Because the device needs to disperse heat during working, place the device and the
power supply in a ventilated and shady place. Never cover the device, put objects on it,
or place it near water, fire as well as inflammable and explosive materials.
● This device should be installed and operated with a minimum distance of 20 cm between
the antenna and all persons.
● Keep the ambient temperature between -10°C and 50°C while the device is being
charged. Keep the ambient temperature between -10°C to 50°C for using the device
powered by a battery.
Safety of Children
Comply with all precautions with regard to children's safety. Letting the child play with your
device or its accessories, which may include parts that can be detached from the device, may
be dangerous, as it may present a choking hazard. Ensure that small children are kept away
from the device and accessories.
Accessories
Use the accessories delivered only by the manufacturer. Using accessories of other
manufacturers or vendors with this device model may invalidate any approval or warranty
applicable to the device; result in the non-operation of the device, and cause danger.
Battery and Charger
● Unplug the charger from the electrical plug and the device when not in use.
Warnings and Precautions
17
● Do not connect two poles of the battery with conductors, such as metal materials, keys,
or jewelries. Otherwise, the battery may be short-circuited and may cause injuries and
burns on your body.
● Do not disassemble the battery or solder the battery poles. Otherwise, it may lead to
electrolyte leakage, overheating, fire, or explosion.
● If battery electrolyte leaks out, ensure that the electrolyte does not touch your skin and
eyes. When the electrolyte touches your skin or splashes into your eyes, wash your eyes
with clean water immediately and consult a doctor.
● If there is a case of battery deformation, color change, or abnormal heating while you
charge or store the battery, remove the battery immediately and stop using it. Otherwise,
it may lead to battery leakage, overheating, explosion, or fire.
● If the power cable is damaged (for example, the cord is exposed or broken), or the plug
loosens, stop using the cable at once. Otherwise, it may lead to an electric shock, a
short circuit of the charger, or a fire.
● Do not dispose of batteries in fire as they may explode. Batteries may also explode if
damaged.
● Danger of explosion if battery is incorrectly replaced. Recycle or dispose of used
batteries according to the local regulations or reference instruction supplied with your
device.
Cleaning and Maintenance
● The device, battery, and charger are not water-resistant. Keep them dry. Protect the
device, battery, and charger from water or vapor. Do not touch the device or the charger
with a wet hand. Otherwise, it may lead to a short circuit, a malfunction of the device,
and an electric shock to the user.
● Do not place your device, battery, and charger in places where they can get damaged
because of collision. Otherwise, it may lead to battery leakage, device malfunction,
overheating, fire, or explosion.
● Do not place magnetic storage media such as magnetic cards and floppy disks near the
device. Radiation from the device may erase the information stored on them.
● Do not leave your device, battery, and charger in a place with an extreme high or low
temperature. Otherwise, they may not function properly and may lead to a fire or an
explosion.
● Do not place sharp metal objects such as pins near the earpiece. The earpiece may
attract these objects and hurt you when you are using the device.
Warnings and Precautions
18
● Before you clean or maintain the device, power off the device and disconnect it from the
charger.
● Do not use any chemical detergent, powder, or other chemical agents (such as alcohol
and benzene) to clean the device and the charger. Otherwise, parts of the device may
be damaged or a fire can be caused. You can clean the device and the charger with a
piece of damp and soft antistatic cloth.
● Do not dismantle the device or accessories. Otherwise, the warranty on the device and
accessories is invalid and the manufacturer is not liable to pay for the damage.
Emergency Call
You can use your device for emergency calls in the service area. The connection, however,
cannot be guaranteed in all conditions. You should not rely solely on the device for essential
communications.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
● Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications made to this device not expressly approved by Huawei
Technologies Co., Ltd. may void the FCC authorization to operate this device.
Warnings and Precautions
19
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without
prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei Technologies
Co., Ltd. and possible licensors. Customers shall not in any manner reproduce, distribute,
modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense
the said software, unless such restrictions are prohibited by applicable laws or such actions are
approved by respective copyright holders under licenses.
Trademarks and Permissions
,
and
are trademarks or registered trademarks of Huawei Technologies Co.,
Ltd.
Other trademarks, product, service and company names mentioned are the property of their
respective owners.
Notice
Some features of the product and its accessories described herein rely on the software installed,
capacities and settings of local network, and may not be activated or may be limited by local
network operators or network service providers. Thus the descriptions herein may not exactly
match the product or its accessories you purchase.
Huawei Technologies Co., Ltd. reserves the right to change or modify any information or
specifications contained in this manual without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE
ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL
HUAWEI TECHNOLOGIES CO., LTD. BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE,
DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will obtain
all necessary governmental permits and licenses in order to export, re-export or import the
product mentioned in this manual including the software and technical data therein.
Warnings and Precautions
20
address in your country or region.
Warnings and Precautions
21
|